39178036
tender for request for proposal ( rfp ) for obtaining item rate of electrical goods in gda gorakhpur. 1 gi octagonal pole 2 supply of fixing of 6 mtr gi octagonal pole ( top dia 70mm, bottom dia 130 mm and base plate 12mm thik ) having 3mm thikness with singale arm bracket 1 mtr length in 1:2:4 rcc foundation bolt including the cost of foundation, excavation & back filling and required t&p complete in all respect. 3 supply of fixing of 6 mtr gi octagonal pole ( top dia 70mm, bottom dia 130 mm and base plate 12mm thik ) having 3mm thikness with double arm bracket 1 mtr length in 1:2:4 rcc foundation bolt including the cost of foundation, excavation & back filling and required t&p complete in all respect. 4 supply of fixing of 7 mtr gi octagonal pole ( top dia 70mm, bottom dia 130 mm and base plate 12mm thik ) having 3mm thikness with singal arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 5 supply of fixing of 7 mtr gi octagonal pole ( top dia 70mm, bottom dia 130 mm and base plate 12mm thik ) having 3mm thikness with double arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 6 supply of fixing of 8 mtr gi octagonal pole ( top dia 70mm, bottom dia 135 mm and base plate 12mm thik ) having 3mm thikness with singal arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 7 supply of fixing of 8 mtr gi octagonal pole ( top dia 70mm, bottom dia 130 mm and base plate 12mm thik ) having 3mm thikness with double arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 8 supply of fixing of 9 mtr gi octagonal pole ( top dia 70mm, bottom dia 155 mm and base plate 12mm thik ) having 3mm thikness with singal arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 9 supply of fixing of 9 mtr gi octagonal pole ( top dia 70mm, bottom dia 155 mm and base plate 12mm thik ) having 3mm thikness with double arm bracket ( 1 mtr length each ) on rcc foundation including the cost of foundation, foundation, bolts, excavation & back filling and required t&p complete in all respect. 10 supply of fixing of 10 mtr gi octagonal pole ( top dia 100mm, bottom dia 200 mm and base plate 16mm thik ) having 3 mm thikness with single arm bracket 1 mtr length in 1:2:4 rcc foundation bolt including the cost of foundation, excavation & back filling and required t&p complete in all respect. 11 supply of fixing of 10 mtr gi octagonal pole ( top dia 100mm, bottom dia 200 mm and base plate 16mm thik ) having 3 mm thikness with double arm bracket 1 mtr length in 1:2:4 rcc foundation bolt including the cost of foundation, excavation & back filling and required t&p complete in all respect. 12 decorative pole 13 supply and fixing of 3mtr. decorative mild steel galvanized tubular pole having di?erent pro?le. bottom pro?le 1000mmx 140mmx4.8mm and top pro?le 3000mmx75mmx 3.2mm with cast aluminium embellishment e3. pole has a service window and ?xed base plate at bottom pro?le. pole is primer coated and pu painted. 14 supply and installation of decorative ornamental pole with single arm bracket. total height of the pole with single arm bracket shall be 7000 mm nominal above the ground. the pole is made out of grooved milled steel tube and cast iron base. decorative pole with single arm bracket shall be installed at desired location including foundation of the pole by making cement concrete foundation of 1:2:3 ( 1 cement: 3 coarse sand: 6 geaded stone aggregate 40 mm nominal size ) with the help of anchor bolts and 38mm. g.l. sleeve as required. 15 supply and fixing of 3 mtr. mild steel pole dia 150x150x3 mm thickness pipe size.3 mtr height, 250x250x12 mm base plate, 1200 mm cnc cutting as per approved design service window 300x100 mm junction box . inside p.c / pamma diffuser withhigh illuminance free lighting.p.u primerd & and p.u paint .as per client requirement.80 watt 3 k colour led system pcd 250 base plate and cnc cutting with gda symbol on pole. 16 s / e of 3mtr. ornamental pole made of gravity die casted aluminium base welded on ms base plate of 570mm dia and gi ribbed extruded pipe 105mm dia with 15 nos grooves running from top to bottom welded with base plate. having service window at bottom with 4 way connector & mcb, pole duly machined primer coated & painted with italian capcicoat graphite grey polyurethane paint dft 90 micron. 17 supply and fixing of decorative column light ( try colour ) of height 2.8mtr. above the ground level having 165mm dia pole upto 1mtr. height made of mild steel with cast iron embellishments, provided with rectangle shape service window at the lower part of the pole. round base plate of cast iron 340mmm dia is provided i / c 75w led fitted in 1.8mtr. height unbreakable polycarbonate diffuser with titan finish complete with all connections and accessories like connector, wire, mcb etc. powered by philips driver and external 10kv surge. 18 decorative cast iron pole as per approved design of following length with base plate on the cement concrete foundation of m 15 grade with the help of anchor bolts of grade 6.8 ( is 1367 p iii ) . the pole shall be made of cast iron to achieve good finish and a fine coat of primer on each element before assembling. after assembling of each element one coat of primer and two coats of p.u. paint are applied. approved coloured uv resist coating of mat / glossy / metallic finish followed after air drying of pole. the pole shall have a weatherproof flush door and locking arrangements, two / one arm bracket of length of 430 / 380mm complete in all respect.5 mtr. height decorative pole with five arms along with 5 nos. 19 s / f of conical street lighting pole of 5000mm height suitable for mounting street light luminaires, made out of hot rolled steel grade e250, as per is 2062:2011 and designed suitably for wind speed upto 50m / s wind conforming to is 875: part 3:1987. the perfect conical profile extends from the square base plate of ms ( grade e250 ) of size 250mmx250mm, 12mm thick and facilitated with 4 elongated slots 38mm x 19mm at cc 180mm to suit the 500mm, j type, m16 bolts ( grade 4.6 ) . the cable entry hole ø 70mm is provided at the centre of the baseplate. the continuously tapered pole shall have top ø 70 mm and bottom ø 130 mm, 3mm thick suitable to mount an artistically designed and angularly curved arm bracket that suits the conical form factor of the pole.the surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like, rust, oxides and other unwanted particles from the surface for high standard coating. the surface finish of the pole shall be zinc rich primer coat & pure polyester powder coating providing 60 microns dft. pole should be suitable for mounting solar all in one light. 20 supply and fixing of 6mtr. pole with cast aluminium base & galvanized embellishment. embellishment paint in golden colour. mild steel bottom profile dia 270mm with decorativ+b8e suitable for double arm decorative bracket for drop down antern. a service window is provided at the bottom middle profile dia 114mm & top profile dia 100mm. section with 4way connector & mcb for loop in loop out arrangement. pole is primer coated & pu painted including foundation bolt with base plate. bracket : 2000mm double arm bracket ( 900mm over hang bothside ) . bracket is provided for suspension of decorative. 21 supply and fixing of pole 6mtr. pole with cast aluminium base & galvanized mild steel bottom profile dia 270mm with decorative top profile dia 100mm. suitable for single arm decorative bracket for drop down lantern. a service window is provided at the bottom section with 4way connector & embellishment. embellishment paint in golden colour. mcb for loop in loop out arrangement with inbuilt speaker in pole, pole is primer coated & pu painted. bracket : 1000mm single arm bracket 1000mm over hang.bracket is provided for suspension of decorative fixture. bracket is made of mild steel pipe with decorative embellishment. 22 supply of 6m single arm pole made of circular mild steel pipe of two section ( grade yst 210 ) bottom section 139.7mm dia x 3.6mm thick with 750mm height & radial bend top section 60.3mm dia x 2.6mm thick and facilitating the fitment of luminaire at 1050mm from the vertical axis of the stem. the pole should be provided with base cover of suitable size to hide the foundation bolts. pole section welded by certified welders using high end mig welding processes. pdc aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope.the control gear tray is prewired with 2.5 sq.mm cable, 6a mcb and 32a terminal connectors for loop in / loop out arrangement. any other internal cables and connections shall not be covered in the scope of supply. mild steel mounting plate 200mm square x 12mm thick steel of grade e250 to is 2062 : 2011 with 4 elongated holes 38 x 19 to suit m16 x 300mm bolts of grade 4.6 at cc 140. this mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. all dimension are within + / 5% tolerance. after fabrication, entire pole is shot blasted ( inhouse ) . the pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using nvironmentally stable polyurethane based paint ( coating thickness 60 80 microns ) . the pole shall be provided with graphite grey / anthracite grey / black as standard colour options. 23 supply of 6m double arm pole made of circular mild steel pipe of two section ( grade yst 210 ) bottom section 139.7mm dia x 3.6mm thick with 750mm height & middle section 88.9mm dia x 3.6mm thick & radial bend top section 60.3mm dia x 2.6mm thick and facilitating the fitment of luminaire at 1150mm each from the vertical axis of the stem. the pole should be provided with base cover of suitable size to hide the foundation bolts. pole section welded by certified welders using high end mig welding processes. pdc aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope.the control gear tray is prewired with 2.5 sq.mm cable, 6a mcb and 32a terminal connectors for loop in / loop out arrangement. any other internal cables and connections shall not be covered in the scope of supply. mild steel mounting plate 200mm square x 12mm thick steel of grade e250 to is 2062 : 2011 with 4 elongated holes 38 x 19 to suit m16 x 300mm bolts of grade 4.6 at cc 140. this mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. all dimension are within + / 5% tolerance. after fabrication, entire pole is shot blasted ( inhouse ) . the pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint ( coating thickness 60 80 microns ) . the pole shall be provided with graphite grey / anthracite grey / black as standard colour options. 24 9mtr. decorative mild steel galvanized tubular pole having different profile bottom profile 2000mm x165mmx4.5mm, middle profile 2000mmx140mm x4.5mm and top profile 5000mmx114mmx3.6 mm including 6nos. arms ( total 18nos. module ) .the pole has a ms base plate 400x400x20 mm duly welded with bottom profile pole has a service indow and fixed base plate at bottom profile. pole is primer coated and pu painted and cnc cutting with gda symbol on pole. 25 led street light 26 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 15 to 25 watt. confriming to ip 66 and protection complete in all respect. cat aaa 27 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 15 to 25 watt. confriming to ip 66 and protection complete in all respect. cat aa 28 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 30 to 40 watt. confriming to ip 66 and protection complete in all respect. cat aaa 29 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 30 to 40 watt. confriming to ip 66 and protection complete in all respect. cat aa 30 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 45 to 50 watt. confriming to ip 66 and protection complete in all respect. cat aaa 31 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 45 to 50 watt. confriming to ip 66 and protection complete in all respect. cat aa 32 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 75 to 90 watt. confriming to ip 66 and avove protection complete in all respect. cat aaa 33 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 75 to 90 watt. confriming to ip 66 and avove protection complete in all respect. cat aa 34 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 110 to 130 watt. confriming to ip 66protection complete in all respect.cat aaa 35 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 110 to 130 watt. confriming to ip 66protection complete in all respect.cat aa 36 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 140 to 150 watt. confriming to ip 66protection complete in all respect. cat aaa 37 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 140 to 150 watt. confriming to ip 66protection complete in all respect. cat aa 38 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 175 to 200 watt. confriming to ip 66protection complete in all respect. cat aaa 39 supply and fixing of led street light fitting having die cast aluminium body and diffuser with set suitable for 175 to 200 watt. confriming to ip 66protection complete in all respect. cat aa 40 supply and fixing of high end led decorative heritage luminaire with features of foursided street lamps decorative look. the system lumen should be min 9000 lumens. the luminaire efficacy should be 100lm / w. system wattage should not be more than 90w 41 pathlight & bollard luminaries 42 supply and fixing of 3 to 6 watt. led spot / spike light luminaries confriming to ip 66 protection complete in all respect. cat aaa 43 supply and fixing of 3 to 6 watt. led spot / spike light luminaries confriming to ip 66 protection complete in all respect. cat aa 44 supply and fixing of decorative 8to 16 watt. led bollard luminaries with driver setconfriming to ip 66 protection complete in all respect. cat aaa 45 supply and fixing of decorative 8to 16 watt. led bollard luminaries with driver setconfriming to ip 66 protection complete in all respect. cat aa 46 supply and fixing of decotative 30 40 watt led bollard made out of cast aluminium profile with cast aluminium body with pc single piece diffuser for glare free lighting hight 1100 mm colour rending ( cri ) >70 co related colour temp. ( cct ) 3000k 6000k estimated life span of leds >50000 hours. 47 supply and fixing of decorative 40 to 45watt. led post top indirect light luminaries having pressure die cast aluminium body and clear glass with driver setconfriming to ip 65 and above protection complete in all respect. cat aaa 48 supply and fixing of decorative 40 to 45watt. led post top indirect light luminaries having pressure die cast aluminium body and clear glass with driver setconfriming to ip 65 and above protection complete in all respect. cat aa 49 decorative light 50 40 watt led decorative post top fixture ( ip 65 ) made with corrosion resistant die cast aluminium, height of light at appropriate location for water resistant ( ip 65 ) 4 nos. with die cast base of of dia 60mm, rubber gaskets are provided fixture is 425mmfixture is 425mm with hatof dia 550 mm of pipe support to di?user and canopy.?xture is 425mmdi?user is made of unbreakable pc material.led to be mounted on vertical square aluminium exclusion top to bottom height on di?user light fixture is painted with mutiple coats ofweather resistant polyurethane paint. 51 ornamental decorative 40 watt led post top luminaire, made of cast aluminium housing duly powder coated / pu painted with pc / pmma clear / frosted diffuser with sturdy triple am. mcpcb having high lumen leds are mounted on aluminium heat sink. 52 supply and fixing of 90 watt led drop down luminaire made of aluminium housing duly powder coated / pu painted with pc / pmma clear / frosted diffuser for high illuminance / glare free lighting. mcpcb having high lumen led’s are mounted on aluminium heat sinks. 53 ornamental decorative with single crown 150 watt led drop down luminaire made of aluminium housing duly powder coated / pu painted with pc / pmma clear / frosted diffuser for high illuminance / glare free lighting. mcpcb having high lumen having high lumen. 54 solar light 55 solar integrated light 15 watt. minimum 1800lm with built in lifepo4 battery 12.8v, 84wh and mono crystalline panel 18v 18w with autonomy of 2 days and minimum warranty of 3 years & automatic on / off features. 56 supply of fully integrated all in one solar light 40 watt with high performance lifepo4 battery 12.8 v 24 ah with more than 1800 cycles integrated bms and integrated 12v 60 w mono crystalline panel. peak lighting efficiency 125lm / watt and total lumen output 5000 lumen, 2 rainy days coverage, asl to achieve all night lighting on change of wheather. tcs to protect the battery charging and discharging in high temprature, warranty 3 years. 57 s / f of 60 watt all in one solar street light with ip 65 protectedcomponents made in india with highefficiency mono crystallinesolar pv module 90 wp, lithium ferro phosphate battery ( lifepo4 ) of 12.8 v 42 ah with inbuilt bms technology, high efficacy led withmin 120 lm / watt, mppt solar charge controller &aluminumextruded body , all in one fixture should be with intelligent dimmingwith preset algorithm with a backup time of 2 days . fixture should bewith low voltage indicator of red color led and charging indicator ofgreen color led, for the safety of the complete system fixture shouldhave following protections: a. over charge protection, b. deepdischargeprotection c. over current protection. manufacturer of thefixture should have in house nabl approved testing lab with afacility to test, photometry of the product. certificate required are lm79 for the fixture, lm 80 for the led chip, bis for the battery cell. 58 supply of fully integrated all in one solar light 80 watt with high performance lifepo4 battery 25.6v 460wh with more than 1800 cycles and integrated mono panel 110w 36v. peak lighting efficiency 125lm / watt and total lumen output 12000lm, 2 rainy days coverage, asl to achieve all night lighting on change of wheather. tcs to protect the battery charging and discharging in high temprature and builtin wireless remote monitoring features in dtu optional available. warranty 5 years. 59 supply and fixing bracket to install to integrated light at same height back to back. ( single bracket ) 60 façade lighting 61 supply of wall mounted up down light gray pure polyester powder coated, pressure die cast aluminium housing for efficient thermal management, sturdiness & excellent corrosion resistance. the housing should be ip66 protection for high reliability in outdoor applications. high efficiency long life cob led mounted on mcpcb on opposite ends of fixture. lumen efficacy of led >140 lm / w.high quality toughened glass in clear finish for uniform light distribution upward & downward light ratio 50:50 and high impact resistance ik07. the fixture should have built in potted, electronic driver ( smps based constant current supply ) with thd<10 & pf> 0.95, open / short circuit protection & other safety test as per is:15885 part 2 / sec 13. the length of the fixture should not be more than 275 mm and width not more than 100mm total system lumen output should not be less than 1200 lumen in cct of 3000k cri>80 with system wattage not exceeding 15w. 62 supply of wall mounted up down light gray pure polyester powder coated, pressure die cast aluminium housing for efficient thermal management, sturdiness & excellent corrosion resistance. the housing should be ip66 protection for high reliability in outdoor applications. high efficiency long life cob led mounted on mcpcb on opposite ends of fixture. lumen efficacy of led >140 lm / w.high quality toughened glass in clear finish for uniform light distribution upward & downward light ratio 50:50 and high impact resistance ik07. the fixture should have built in potted, electronic driver ( smps based constant current supply ) with thd<10 & pf> 0.985, open / short circuit protection & other safety test as per is:15885 part 2 / sec 13. the length of the fixture should not be more than 310 mm and width not more than 100mm total system lumen output should not be less than 2500 lumen in cct of 3000k cri>80 with system wattage not exceeding 25w. 63 supply of 25w led mini flood light with lumens > 2400 lms, power factor > 0.95, cri > 80 with ip66 and ik07 gray pure polyester powder coated, pressure die cast aluminum housing for efficient thermal management, sturdiness & excellent corrosion resistance &high quality toughened glass in clear finish for uniform light distribution. length 208mm; width 100 mm and height 390mm including spike.high efficiency long life cob led mounted on mcpcb of fixture. powered by a built in potted, electronic driver ( smps based constant current supply ) with lower thd < 10%, output open / short circuit protection, surge voltage protection upto 4kv & other safety test as per is:15885 part 2 / sec 13.lumen efficacy of led >140lm / w. with aluminum heat sink for effective thermal management with operating temperature: 10°c to +45°c. weighing 1.7 kg. work should be complete. with necessary factory madeweatherproof cable, , lenses , and external power and data supply [ if any ] , wiring, junction boxes, provisioning of power and data cabling etc. as required. suitable fixing arrangement, 64 foundation as required complete in all respect as per direction of engineer in charge. the product should be bis approved ( if applicable ) with r number mentioned on product label. to be supported with product test reports lm79, bis report and leds lm80, rohs and photo biological safety certificate. 65 supply of mono colour flood light luminaire made up of pressure die cast aluminum body, clear poly carbonate cover, poly carbonate lens for symmetric light distribution with std 30 deg beam only. system wattage : 50w, ip rating – ip 65 & ik rating – ik 07, cri > 70 & surge voltage protection 4.0 kv, powered by an built in potted electronic led driver ( smps based constant current supply ) with lower thd < 10%, output open / short circuit protection, over voltage protection, surge voltage protection & other safety test as per is 15885 part 2 / sec 13. mono colour should be yellow having system lumen > 4500 lms. respectively. bidder has to submit technical data sheet of each light confirming above parameters. 66 supply, of exterior bis registered 3000k flexible led strip with 14.4 watt per meter. led strip should have 60nos leds per meter through out the length with the silicon cover with system lumens 1261 lms / meter and system lumen efficacy87lm / w / meter. standard length of led strip is 5 mtr.the strip should have ip 67 protection with inbuilt ip67 connectors at both ends.led strip shall be suitable to operate at an ambient temperature range of 20°c to 50°c. life time shall be at least l70b50 @ 35000 burning hours at 50°c. led should of make nichea, osram, cree, lumiled, hongya of 5050 smd package only. the rated voltage of the luminaire should be 24vdc, luminaire shall be offered with a bis approved potted driver of ip 66 / 67 rating made of extruded aluminium to make it more thermal efficient, led driver should have operating input voltage range: 90 305vac, pf > 0.95 and must have safety operation range form 90v 176vac. life time of led driver should be > 80, 000hours and mtbf of led driver should be = 2, 00, 000 hrs, led driver must have selv output and case temperature i.e. tc > 90°c. the product should be bis approved with r number mentioned on product label. to be supported with product test reports lm79, bis report and leds test reports.luminaire shall be conforming to bis i.e. is 10322 ( part 5 / sec 7 ) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 67 supply of mono colour flood light luminaire made up of pressure die cast aluminum body, high quality toughened glass in clear finish for uniform light distribution. prismatic chrome plated reflector for controlled beam angle of 60°. system wattage : 5w, ip rating – ip 66 & ik rating – ik 07, cri > 80, cct : 3000k, system lumen : 300 lms. powered by an built in potted, electronic driver ( smps based constant current supply ) with lower thd, output open / short circuit protection, surge voltage protection upto 4kv & other safety test as per is:15885 part 2 / sec 13. 68 supply, of exterior bis registered 3000k linear led wall washer luminaire for facade lighting with extruded aluminium housing, powder coated finish, clear toughened glass of 4mm thickness and die casted end caps, of total system wattage not exceeding 40w with system lumen output3600 lm with all leds on, minimum system lumen efficacy85lm / w.luminaire should be complete with dedicated linear lens made up of ul / vde approved pc / pmma, offering beam angle of different types such as 10° / 30° / 60°as per the site requirement. fixture should have height 66 mm ± 5% including surface mount basewidth 40 mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools.the rated voltage of the luminaire should be 230vac, one led driver can operate multiple luminaire. fixture shall be suitable to operate at an ambient temperature range of 10°c to 45°c and complete luminaire shall be ip66 and ik07 rated. led life time shall be at least l70b50 @ 50000 burning hours at 50°c. led should be with ceramic package of make nichea, osram, cree, lumiled, seoul only.the product should be bis approved with r number mentioned on product label. to be supported with product test reports lm79, bis reportandledstestreports.luminaire shall be conforming to bis i.e. is 10322 ( part 5 / sec 5 ) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 69 supply, of exterior bis registered 3000k linear led wall washer luminaire for facade lighting with extruded aluminium housing, powder coated finish, clear toughened glass of 4mm thickness and die casted end caps, of total system wattage not exceeding 25w with system lumen output 2500 lm with all leds on, minimum system lumen efficacy100lm / w.luminaire should be complete with dedicated linear lens made up of ul / vde approved pc / pmma, offering beam angle of different types such as 10° / 30° / 60°as per the site requirement. fixture should have height 66 mm ± 5% including surface mount basewidth 40 mm ± 5% , length 600 mm ± 5% with constant locking hinges for simple position control from various angles without special tools.the rated voltage of the luminaire should be 230vac, one led driver can operate multiple luminaire . fixture shall be suitable to operate at an ambient temperature range of 10°c to 45°c and complete luminaire shall be ip66 and ik07 rated. led life time shall be at least l70b50 @ 50000 burning hours at 50°c. led should be with ceramic package of make nichea, osram, cree, lumiled, seoul only.the product should be bis approved with r number mentioned on product label. to be supported with product test reports lm79, bis reportandledstestreports.luminaire shall be conforming to bis i.e. is 10322 ( part 5 / sec 5 ) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 70 supply of 150w bis approved potted driver of ip 66 / 67 rating made of extruded aluminium to make it more thermal efficient, led driver should have operating input voltage range: 90 305vac, pf > 0.90 and must have safety operation range form 90v 176vac. led driver must have case temperature i.e. tc > 90°c. driver should be compatible with led strip & linear lights. 71 supply, installation, testing & commissioning of led projector light fixture 150w led, ( dmx512 compatible ) . ip 66. the housing should be made of high strength pressure die cast aluminium with 3 4mm thick safety glass and coated by static powder making it weather resistant. protection screen with tempered glass with high impact resistanco ik07 voltage input ac240v, 50hz. the luminaire should have options for various beam angle: 10 / 25° / 40° / 60. light fixture should be standard dmx512 protocol compatible, the dmx decoder function should be inbuilt the light fixture. estimated led lifetime is l70 |100, 000 hours minimum@ 25degree ambient temperature and leds of cree / osram / |nichia to be used. minimum light fixture lumen output atleast 6000 lumens@full power. operating temperature: 20°c to +50°c. housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. 72 supply, installation testing & commissioning of led projector light fixture 90w, led. rgb / rgbw ( dmx512 compatible ) , ip 66. the housing should be made of high strength ) pressure die cast aluminium with 3 4mm thick safety glass and coated by static powder making it weather resistant protection screen with tempered glass with high impact resistance ik07 voltage input ac240v 50hz. the lurninaire should have options for various bear angle: 10 / 25 / 40 / 60, light fixture should be standard dmx512 protocol.compatible, [ the dmx decoder function should be inbuilt the light fixture. estimated led lifetime is l70 | 100, 000 hours minimum@ 25degree ambient temperature and leds of cree / osram / |nichia to be used, minimum light fixture lumen output atleast 3600 lumens@full power operating temperature: 20°c to +50°c housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. 73 supply, installation testing & commissioning of led projector light fixture 50wled |rgb / rgbw ( dmx512 compatible ) , ip 66. the housing should be made of high strength ) pressure die cast aluminium with 3 4mm thick safety glass and coated by static powder making it weather resistant. protection screen with tempered glass with high impact resistance ik07 voltage input ac240v, 50hz. the luminaire should have options for various | beam angle: 10 / 25 / 40 / 60 light fixture should be standard dmx512 protocol.compatible, the dmx decoder function should be inbuilt the light fixture. estimated led lifetime is l70 100, 000 hours minimum@ 25degree ambient temperature and leds of cree / osram / | nichia to be used. minimum light fixture lumen output atleast 2000 lumens @full power. operating temperature: 20°c to +50°c. housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural jelements. 74 supply, installation, testing & commissioning of rgb / rgbw linear wallwasher made of aluminium extrusion, led make: cree / luminous / osram / seoul / samsung, sexterior rated linear+b58 luminaire ( 1000mm ) , input power 24w. dmx512 with inbuilt decoder |pcb for individual addressing for programming rated input supply of input voltage 24v dc, luminaire luminous flux minimum range 960lm. ip protection rating: ip66. the luminaire should have multiple beam angle: 10, 20, 40, 60, 10x20 75 supply, installation, testing & commissioning of signal booster / splitter with 4 way output for spreading and amplyfing the dmx data signals in multiple directions, input 220 240v ac. 76 supply, installation, testing & commissioning of 2x512 dmx 512 controller and synchoronization with the existing dmx controller. input power 5 5.5v dc 0.6a. output. protocol dmx512. programmability windows, mac os, ios, android, connections type c usb, xlr3, ethernet, he20, battery memory microsd sd & sdhc, environment ip20 0°c 50°c, buttons 10 buttons for direct access, 2 buttons to change scene, +1 button to change zone. dimensions 160x90x45mm 268g. os requirements mac os x 10.8 10.15, windows 7 / 8 / 10 64bit standards ec, emc, rohs. 77 supply, installation, testing & commissioning of dmx special cable ( single pair ) having one 22awg pair stranded ( 7x30 ) tinned copper conductors, datalene ( fhdpe ) insulation, twisted pairs, overall beldfoil shield ( 100% coverage ) plus tinned copper braid pvc jacket cable. 78 programming, testing, troubleshooting and synchronization of dmx control system. the addressing of fixtures with the multiple scenes ( atleast 20themes ) . 79 supply, installation, testing & commissioning of enclosure for power.supply, splitter, dmx controller: plain sides, grey cover, degree of protection: ip 66 / ip 67, impact strenght: ik 08, material, base: fiberglass reinforced polycarbonate, material, cover, polycarbonate, material, cover screws: polyamide, material, gasket: polyurethane, colour: ral 7035. 80 supply and fixing of factory wired integral led flood light luminaries with die cast aluminium housing built with dirver set suitable for 70 to 90 watt. confriming to ip 66 protection complete in all respect. cat aaa 81 supply and fixing of factory wired integral led flood light luminaries with die cast aluminium housing built with dirver set suitable for 140 to 150 watt.confriming to ip 66 protection complete in all respect.cat aaa. 82 supply and fixing of factory wired integral led flood light luminaries with die cast aluminium housing built with dirver set suitable for 170 to 200 watt.confriming to ip 66 protection complete in all respect. cat aaa. 83 highmast 84 supply & fixing of 12.5 mtr high mast shaft of approved make with rising hot dip glavanised inside & out side dip, heaving pole sheet thickness 3 mm. top dia minium 150 mm, bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 hp power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufaturedrawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 85 supply & fixing of 16 mtr high mast shaft of approved make with rising hot dip glavanised inside & out side dip, heaving pole sheet thickness 3 mm. top dia minium 150 mm, bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6to 12 luminaries & its control gear boxes 1.5 hp power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufaturedrawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 86 supply & fixing of 20 mtr high mast shaft of approved make with rising hot dip glavanised inside & out side dip, heaving pole sheet thickness 4 mm. top dia minium 150 mm, bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6to 12 luminaries & its control gear boxes 1.5 hp power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufaturedrawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 87 supply & fixing of 25 mtr high mast shaft of approved make with rising hot dip glavanised inside & out side dip, heaving pole sheet thickness 4 mm. top dia minium 150 mm, bottom dia 460 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8to 12 luminaries & its control gear boxes 1.5 hp power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufaturedrawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 88 supply & fixing of 30 mtr high mast shaft of approved make with rising hot dip glavanised inside & out side dip, heaving pole sheet thickness 4 mm. top dia minium 150 mm, bottom dia 500 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8to 12 luminaries & its control gear boxes 1.5 hp power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufaturedrawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. 89 dribver with spd 90 dribver with spd for 45 to 50 watt. led street light 91 dribver with spd for 75 to 90 watt. led street light 92 dribver with spd for 110 to 130 watt. led street light 93 dribver with spd for 70 to 90 watt. led flood light 94 dribver with spd for 140 to 150 watt. led flood light 95 dribver with spd for 170 to 200 watt. led flood light...
Due Date : September 05, 2023
Tender Value : ₹ Ref. Documents
