test sieves Tenders in Uttar Pradesh

2
Finance Department - Uttar Pradesh

36544109 bids are invited for multi parameter water anlyser , uv vis digital spectrophotomete , digital ph meter with electrode , incubator , controller based visible spectrophotometer , oven universal , moisture analyzer , precision balance , digital magnetic stirrer with hot plate , pusa stfr meter kit for 12 parameter , ec meter , soil permeability meter , grain size analyzer , bacteriological incubator , standard test sieve clamping devices for test sieves , compound microscope , hygrometer , soil penitro meter , ph meter , rain gauge , humidity meter , soil testing kit for macronutrients, , test tubes, without rim, 18x150mm , flask, narrow neck, reinforced rim, 100ml , flask, narrow neck, reinforced rim, 250ml , flask, narrow neck, reinforced rim, 500ml , beaker, low form, reinforced rim, 100ml , beaker, low form, reinforced rim, 500ml , beaker, low form, reinforced rim, 1000ml , petri plate , measuring cylinder, hexagonal base, 100ml , measuring cylinder, hexagonal base, 500ml , measuring cylinder, hexagonal base, 1000ml total quantity : 154...

Due Date : March 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
North Eastern Railways - Uttar Pradesh

36479677 supply of set of standard astm test sieveno. 10,30set of standard astm test sieveno. 10,30,set of standard astm test sieveno. 10,30,50 and 80, material of frame brass, material mesh stainless steel (304) sieves dia 8 inch with nabl certification of each test sieves. supplyied with receiving lid and pan made of brass. [ warranty period: 30 months after the date of delivery ]...

Due Date : March 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
Finance Department - Uttar Pradesh

36171787 bids are invited for lab instrument multi parameter water anlyser , uv vis digital spectrophotomete , digital ph meter with electrode , incubator , controller based visible spectrophotometer , oven universal , moisture analyzer , precision balance , digital magnetic stirrer with hot plate , pusa stfr meter kit for 12 parameter , ec meter , soil permeability meter , grain size analyzer , bacteriological incubator , standard test sieve clamping devices for test sieves , compound microscope , hygrometer , soil penitro meter , ph meter , rain gauge , humidity meter , soil testing kit for macronutrients, , test tubes, without rim, 18x150mm , flask, narrow neck, reinforced rim, 100ml , flask, narrow neck, reinforced rim, 250ml , flask, narrow neck, reinforced rim, 500ml , beaker, low form, reinforced rim, 100ml , beaker, low form, reinforced rim, 500ml , beaker, low form, reinforced rim, 1000ml , petri plate , measuring cylinder, hexagonal base, 100ml , measuring cylinder, hexagonal base, 500ml , measuring cylinder, hexagonal base, 1000ml total quantity : 154...

Due Date : February 20, 2023

Tender Value : ₹ 12 Lakhs

View Tender
5
Uttar Pradesh Rajkiya Nirman Nigam Limited - Uttar Pradesh

31565833 auction of unserviceable scrap auction of unserviceable scrap , high court uuit 2 ( main building work ) , ceiling fan , steel almirah ( 1980x840x746 ) , steel almirah ( 1980x840x746 ) , office table with mapile 6x6 , geeken chair g.p. 105 , geeken chair g.b. 603 , geeken chair g.b. 404 , chair armetic suprime , table small mica top , office chair , revolving chair , computer chair , computer table , steel executive table 1500x900 , office table 120x780x760 , computer set , vistior chair ( with back sheet ) , wall fan ( 400mm ) , earth compactor , high court uuit 2 ( advocate chamber work ) , m.s. coupler , m.s. joint pin , submersible pump ( 1.5 h.p. ) , control pannal ( 1.5 h.p. ) , vibrator neddle 40mm , c.i. cube mould 0.15x0.15x0.15 , vibrator neddle 25mm , electric vibrator , mono block pump ( 0.5 h.p. ) , petrol vibrator , unit 21a high court , m.s. chahli , steel almirah ( 1280x740x430 ) , steel almirah ( 1980x860x480 ) , invertor with battery , ceiling fan 1200mm , office chair , cube mould , high court uuit 3 ( advocate chamber work ) , cube mould ( 15x15x15 ) cm , vibrator niddle ( 40mm ) , electric vibrator , jtri guest house work ( h.c. 3 ) , vibrator niddle ( 40mm ) , jtri 400 bedded hostel work ( h.c. 3 ) , cgi sheet , m.s. chahllies , m.s. coupler , steel almirah ( 1980x860x480 ) , steel almirah ( 1280x760x430 ) , steel cover rack , wooden chair , chair , chair revalving , table wooden , base unit site rack , steel table mica top , office table , computer table , steel side rack , book case 2 drar , steel cabnet , m.s. round farma 300x25 , control pannal ( 10 h.p. ) , high court unit 1 main building , m.s.coupler , m.s.chahali , joint pin , harisons lock , summersable pump , vibrator , ball walve , high court unit 1 multi leval parking , steel rack 6 self , steel almirah big , steel almirah small , computer table 1200x600x760 , file cabinet 725x680x50 , printer , chair maroom gb 404 , chair maroom gb 405 , office table 1370x760x760 , chair black , office chair arm black , chair black gken , pvc chair with arm , ceilingfan , cleaning machine , inverter baterry with troly , computer dell external hardisk , h.p. printer leser jet , stabilizer , high court unit 1 multi leval parking , m.s.chahali , joint pin , cube mould , high court unit 1 jtri 400 bedded hostel , vibrator electrical , weight machine elecrtical 300 k.g. , weight machine elecrtical 6 k.g. , enamel tray , standerd coarsetest sieves , lid & pan , sieve shaker , standerd fine test sieves , test sieves shaker , lid & pan , vernier thredo light level machine , automatic level machine , slamp test appartes temping rod , portable compressor machine , brick testing attachment , steel almirah small , pvc chair , high court unit 1 jtri 400 bedded hostel , m.s. coupler , high court unit 1 advocate chamber , m.s chahli , m.s coupler , m.s channa , m.s measuring box , aluminium stand...

Due Date : March 29, 2022

Tender Value : ₹ Ref. Documents

View Tender
6
Uttar Pradesh Rajkiya Nirman Nigam Limited - Uttar Pradesh

31483412 auction of unserviceable scrap auction of unserviceable scrap , high court uuit 2 ( main building work ) , ceiling fan , steel almirah ( 1980x840x746 ) , steel almirah ( 1980x840x746 ) , office table with mapile 6x6 , geeken chair g.p. 105 , geeken chair g.b. 603 , geeken chair g.b. 404 , chair armetic suprime , table small mica top , office chair , revolving chair , computer chair , computer table , steel executive table 1500x900 , office table 120x780x760 , computer set , vistior chair ( with back sheet ) , wall fan ( 400mm ) , earth compactor , high court uuit 2 ( advocate chamber work ) , m.s. coupler , m.s. joint pin , submersible pump ( 1.5 h.p. ) , control pannal ( 1.5 h.p. ) , vibrator neddle 40mm , c.i. cube mould 0.15x0.15x0.15 , vibrator neddle 25mm , electric vibrator , mono block pump ( 0.5 h.p. ) , petrol vibrator , unit 21a high court , m.s. chahli , steel almirah ( 1280x740x430 ) , steel almirah ( 1980x860x480 ) , invertor with battery , ceiling fan 1200mm , office chair , cube mould , high court uuit 3 ( advocate chamber work ) , cube mould ( 15x15x15 ) cm , vibrator niddle ( 40mm ) , electric vibrator , jtri guest house work ( h.c. 3 ) , vibrator niddle ( 40mm ) , jtri 400 bedded hostel work ( h.c. 3 ) , cgi sheet , m.s. chahllies , m.s. coupler , steel almirah ( 1980x860x480 ) , steel almirah ( 1280x760x430 ) , steel cover rack , wooden chair , chair , chair revalving , table wooden , base unit site rack , steel table mica top , office table , computer table , steel side rack , book case 2 drar , steel cabnet , m.s. round farma 300x25 , control pannal ( 10 h.p. ) , high court unit 1 main building , m.s.coupler , m.s.chahali , joint pin , harisons lock , summersable pump , vibrator , ball walve , high court unit 1 multi leval parking , steel rack 6 self , steel almirah big , steel almirah small , computer table 1200x600x760 , file cabinet 725x680x50 , printer , chair maroom gb 404 , chair maroom gb 405 , office table 1370x760x760 , chair black , office chair arm black , chair black gken , pvc chair with arm , ceilingfan , cleaning machine , inverter baterry with troly , computer dell external hardisk , h.p. printer leser jet , stabilizer , high court unit 1 multi leval parking , m.s.chahali , joint pin , cube mould , high court unit 1 jtri 400 bedded hostel , vibrator electrical , weight machine elecrtical 300 k.g. , weight machine elecrtical 6 k.g. , enamel tray , standerd coarsetest sieves , lid & pan , sieve shaker , standerd fine test sieves , test sieves shaker , lid & pan , vernier thredo light level machine , automatic level machine , slamp test appartes temping rod , portable compressor machine , brick testing attachment , steel almirah small , pvc chair , high court unit 1 jtri 400 bedded hostel , m.s. coupler , high court unit 1 advocate chamber , m.s chahli , m.s coupler , m.s channa , m.s measuring box , aluminium stand...

Due Date : March 21, 2022

Tender Value : ₹ Ref. Documents

View Tender
7
Neyveli Uttar Pradesh Power Limited - Uttar Pradesh

31090621 bids are invited for 1 water analysis : analytical balance 2 top loading balance 3 weight box 4 selective ion analyser 5 selective ion analyser sodium ion selective electrode 6 selective ion analyser potassium ion selective electrode 7 selective ion analyser calcium ion electrode 8 selective ion analyser chloride ion selective electrode 9 oil content analyzer 10 water purification system 11 magnetic stirrer cum hot plate 12 refrigerator 13 vacuum pump 14 portable residual chlorine meter 15 jar test apparatus 16 portable water quality checker 17 bod incubator 18 gas chromatography 19 atomic absorption spectrometer 20 toc analyzer 21 b.o.d. analyser system 22 cod reactor 23 cod reactor compact photometer pf 3 cod, 24 cod reactor cod reagent range:15 160 mg / l 25 cod reactor cod reagent range:100 1500 mg / l 26 lovibond comparator 2000+ 27 lovibond comparator 2000+ cells 13.5 mm, 10 ml plastic comprator cells each 28 lovibond comparator 2000+ 40 mm cell 29 nessleriser 2150 with daylight 2000 30 af 306 / p pair of nessler cylinders 50 ml 113mm glass anti meniscus plungers 31 db 420 pair of nessler cylinders 250mm with glass anti meniscus plungers 32 af 315 special nessler tube pair 33 dpd tablets ( bottles of 100 tab ) 34 indigo carmine 100 g 35 comparator discs :ammonia 0 0.4 mg / l 36 ammonia 0 1.0 mg / l 37 ammonia 0 10 mg / l n nh3 38 ammonia reagent tintometer 465200 39 ammonia reagent tintometer 466101 40 ammonia reagent tintometer 517611bt 41 chlorine 0.1 1.0 mg / l code: 3 / 4 42 chlorine reagent chlorine l 0.01 0.1 mg / l cl2 43 chlorine reagent dpd no. 1, chlorine 0.5 6.0 mg / l cl2 44 chlorine reagent dpd no. 3 nessler, chlorine l 0.01 0.1 mg / l cl2 45 oxygen 0 0.12 mg / l code: noe 46 oxygen reagent tintometer 461150 47 oxygen reagent tintometer 461160 48 oxygen reagent tintometer 461170 49 deposition & corrosion meter: bio fouling monitor & deposition monitor 50 deposition & corrosion meter: corrosion test racks 51 deposition & corrosion meter: corrosion test racks: cs coupons 52 deposition & corrosion meter: corrosion test racks cu:ni 90:10 53 deposition & corrosion meter: corrosion test racks cu:ni 90:05 54 deposition & corrosion meter: corrosion test racks coupons ss 304 55 deposition & corrosion meter: corrosion test racks brass coupons 56 memberane filter holder assembly 57 oil analysis: redwood viscometer 58 pensky martens flash tester 59 dean & stark apparatus 60 flash shaker 61 microprocessor based centrifuge 62 karl fischer titration apparatus 63 portable purge gas analyzer 64 multi gas detector 65 orsat gas analyser 66 heating mantle 67 coal analysis: coal analyser 68 coal analyser: pc and printer 69 coal analyser: oxygen gas cylinder with regulator 70 coal analyser: nitrogen gas cylinder with regul 71 automatic bomb calorimeter 72 automatic bomb calorimeter: oxygen gas cylinder with 2 stage regulator 73 automatic bomb calorimeter: pellet press 74 carbon sulfur analyzer 75 carbon sulfur analyzer: pc and printer 76 carbon sulfur analyzer: oxygen gas cylinder with 2 stage regulator 77 carbon sulfur analyzer: argon gas cylinder with 2 stage regulator 78 ash fusion furnace 79 ash fusion furnace: carbondioxide cylinder with regulator 80 ash fusion furnace: carbonmonoxide cylinder with regulator 81 ash fusion furnace: nitrogen cylinder with regulator 82 ash fusion furnace: compresses air cylinder with regulator 83 muffle furnace 84 lab pulveriser 85 rotop sieve shaker 86 wet sieve shaker 87 wet sieve shaker test sieves size: 3.35 mm 88 wet sieve shaker test sieves size: 2.36 mm 89 wet sieve shaker test sieves size: 1.70 mm 90 wet sieve shaker test sieves size: 1.18 mm 91 8wet sieve shaker test sieves size: 50 μm 92 wet sieve shaker test sieves size: 600 μm 93 wet sieve shaker test sieves size: 425 μm 94 wet sieve shaker test sieves size: 300 μm 95 wet sieve shaker test sieves size: 212 μm 96 wet sieve shaker test sieves size: 150 μm 97 wet sieve shaker test sieves size: 75 μm 98 wet sieve shaker test sieves size: 45 μm 99 wet sieve shaker test sieves size: lid and receiver of above sieves 100 hard groove grindability equipment 101 riffle sampler 102 sieve shaker 103 jaw crusher 104 double roll crusher feed size: 50 mm discharge size: 6 mm capacity: 0.5 ton / hr 105 double roll crusher 13 mm max product size 3 mm capacity 0.25 ton / hr 106 meteorological & pollution electrical amenograph 107 dew point meter 108 rain guage 109 fortins barometer ( mercury barometer ) 110 dry & wet bulb thermometer 111 high volume sampler 112 gaseous sampling attachment envirotech 113 digital psychrometer assmann 114 miscellaneous personal computer 115 sample cooler 116 density hydrometer: range 0.70 to 0.75 subdivisions 0.001 117 density hydrometer: range 0.75 to 0.80 subdivisions 0.001 118 density hydrometer: range 0.80 to 0.85 subdivisions 0.001 119 density hydrometer: range 0.85 to 0.90 subdivisions0.001 120 density hydrometer: range 0.90 to 0.95 subdivisions 0.001 121 density hydrometer: range 0.95 to 1.00 subdivisions 0.001 122 hot air dryer 123 hydrometers 0.800 – 1.000 0.002 124 hydrometers 0.950 1.250 0.002 125 hydrometers 1.200 1.420 0.002 126 hydrometers 1.420 1.620 0.002 127 heating mantel 128 hygrometer 129 printer and scanner 130 chemicals : acetic acid glacial 131 acetone 132 1 amino 2 naphthol 4 sulfonic acid extra pure 133 alkali blue ( c.i. 42765 ) indicator 134 ammonia solution 25% 135 ammonia buffer solution 136 ammonium chloride 137 ammonium heptamolybdate tetrahydrate 138 murexide ( 5, 5’ nitrilobarbituric acid monoammonium salt ) 139 calcium chloride fused 140 starch soluble 141 aluminium metal powder 142 barium chloride dihydrate 143 benzene 144 bromocresol green indicator 145 bromocresol purple indicator 146 calcium acetate 147 calcium chloride dihydrate 148 carbon tetrachloride without label 149 calcon ( indicator ) 150 chlorotex reagent for determination of chlorine content 151 citric acid 152 nitric acid 153 cobalt ( ii ) chloride hexahydrate 154 copper ( ii ) sulfate pentahydrate 155 d ( + ) glucose, anhydrous ( dextrose ) 156 dipotassium hydrogen orthophosphate 157 e.d.t.a. solution n / 50 ( 0.02n ) 158 eriochrome black t 159 edta ethylenediaminetetraacetic acid calcium disodium salt dihydrate 160 iron ( iii ) chloride 161 ammonium iron ( ii ) sulfate hexahydrate 162 fusion mixture 163 glycerol anhydrous 164 hexamethylenetetramine 165 hydrochloric acid 166 hydrazinium sulfate 167 hydrofluoric acid 168 hydrogen peroxide 169 hydroxylammonium chloride 170 indigo carmine ( indicator ) 171 iodine resublimed 172 lead ( ii ) nitrate 173 manganese ( ii ) chloride 174 mercury 175 mercury ( ii ) chloride 176 methanol 177 methyl orange indicator 178 methyl red indicator 179 n.t. napthyl ethylene diaminedithudrochic ride 180 oxalic acid dihydrate 181 ortho phosphoric acid 182 1 10 phenanthroline monohydrate 183 perchloric acid 184 para dimethyl amino benzaldehyde 185 buffer capsules ph 4.00 ± 0.05 186 buffer capsules ph 7.00 ± 0.05 187 buffer capsules ph 9.20 ± 0.05 188 buffer capsules ph 10 ± 0.05 189 potassium bromate 190 potassium bromide 191 phenolpthalein powder 192 ph indicator paper ph 2.0 10.5 193 potassium chromate 194 potassium dichromate 195 potassium chloride 196 potassium hydroxide pellets 197 potassium iodide 198 potassium nitrate 199 potassium permanganate 200 potassium disulfite 201 pyrogallol 202 silica gel self indicating coarse 203 silver nitrate 204 silicone grease 205 sodium acetate anhydrous 206 sodium carbonate anhydrous 207 sodium hydroxide pellets 208 sodium chloride 209 sodium diethyl dithiocarbomate 210 sodium nitrate 211 sodium nitrite 212 sodium thiosulfate pentahydrate 213 potassium sodium tartrate tetrahydrate 214 sodium sulfate anhydrous 215 sulfuric acid 216 sulphosalicylic acid 217 sulfanilic acid 218 sulphanilamide 219 tin granulated 220 toluene 221 universal indicator solution ph 4 11 222 xylene rectified 223 xylenol orange indicator 224 zinc granule reagent grade 225 filter paper whattman make sheets, packed in boxes of 100 sheets 226 filter paper whattman make sheets, packed in boxes of 100 sheets 15 cm dia no 40 227 filter paper whattman make sheets, packed in boxes of 100 sheets 15 cm dia no 41 228 filter paper whattman make sheets, packed in boxes of 100 sheets 15 cm dia no 42 229 benzoic acid 230 ammonium per sulphate 231 mercury ( ii ) thiocyanate 232 rectified spirit ( ethanol ) 233 potassium thiocyanate 234 p&r ( patton& reeder ) indicator 235 starch soluble p&r indicator 236 sulphanilamidear grade 237 phenolsulfonic acid 238 tin ( ii ) chloride anhydrous 239 potassium hydrogen phthalate 240 std iron as fe 1.0 ml = 1.0 mg ( 1000ppm ) 241 std silica as si 1.0 ml = 1.0 mg ( 1000ppm ) 242 std phosphate as p2o5 1.0 ml = 1.0 mg ( 1000ppm ) 243 std hydrazine 1.0 ml = 1.0mg ( 1000ppm ) 244 std chloride as cl 1.0 ml = 1.0mg ( 1000ppm ) 245 std nitrite as no3 1.0 ml = 1.0mg ( 1000ppm ) 246 glassware bottles reagent, plain narrow mouth, graduated with interchangeable flat head stopper borosil 125 ml 247 bottles reagent, plain narrow mouth, graduated with interchangeable flat head stopper borosil 250 ml 248 bottles reagent, plain narrow mouth, graduated with interchangeable flat head stopper borosil 500 ml 249 bottles reagent, plain narrow mouth, graduated with interchangeable flat head stopper borosil 1000 ml 250 bottles reagent, plain narrow mouth, graduated with interchangeable flat head stopper borosil 2000 ml 251 ottles reagent amber narrow mouth with interchangeable flat head stopper borosil 125 ml 252 bottles reagent amber narrow mouth with interchangeable flat head stopper borosil 250 ml 253 bottles reagent amber narrow mouth with interchangeable flat head stopper borosil 500 ml 254 bottles reagent amber narrow mouth with interchangeable flat head stopper borosil 1000 ml 255 bottles weighing with stopper borosil 25 ml 256 bottles weighing with stopper borosil 40 ml 257 bottles weighing with stopper borosil 50 ml 258 bottles weighing with stopper borosil 60 ml 259 bottles dropping with 9.5 ml dropper: 50 ml 260 bottles dropping with 9.5 ml dropper: 100 ml 261 bottles dropping clear glass t.r. pattern with slotted ground glass stopper 50 ml 262 bottles dropping clear glass t.r. pattern with slotted ground glass stopper 100 ml 263 bottles dropping amber glass t.r. pattern with slotted ground glass stopper 50 ml 264 bottles dropping amber glass t.r. pattern with slotted ground glass stopper 100 ml 265 bottles, gas washing ( dreschel ) , complete with interchangeable stopper borosil 125 ml 266 bottles, gas washing ( dreschel ) , complete with interchangeable stopper borosil 250 ml 267 bottles, gas washing ( dreschel ) , complete with interchangeable stopper borosil 500 ml 268 bottle gas wash complete with interchangeable stopper 500 ml 269 bottle gas wash complete with interchangeable stopper 1000 ml 270 bottles relative density, with capillary bore interchangeable: borosil 25 ml 271 bottles relative density, with capillary bore interchangeable: borosil 50 ml 272 bottle, aspirator with cap & outlet for tubing 273 beaker with spout 50 ml 274 beaker with spout 100 ml 275 beaker with spout 250 ml 276 beaker with spout 400 ml 277 beaker with spout 600 ml 278 buretts straight bore stop cock, accuracy as per class b of is 1997:2008 / iso 385:2005 25ml 279 buretts straight bore stop cock, accuracy as per class b of is 1997:2008 / iso 385:2005 10ml 280 buretts straight bore stop cock, accuracy as per class b of is 1997:2008 / iso 385:2005 50 ml 281 buretts straight bore stop cock, accuracy as per class b of is 1997:2008 / iso 385:2005 100 ml 282 pipettes, transfer, volumetric, class b complies with iso / din 648: 10 ml 283 pipettes, transfer, volumetric, class b complies with iso / din 648: 20 ml 284 pipettes, transfer, volumetric, class b complies with iso / din 648: 25 ml 285 pipettes, measuring ( mohr type ) , class b complies to is, iso / din 835: 1 ml 286 pipettes, measuring ( mohr type ) , class b complies to is, iso / din 835: 2 ml 287 pipettes, measuring ( mohr type ) , class b complies to is, iso / din 835: 5 ml 288 pipettes, measuring ( mohr type ) , class b complies to is, iso / din 835: 10 ml 289 funnels, plain, 60 angle, short stem 75 mm dia 290 funnels, plain, 60 angle, short stem 100 mm dia 291 funnels, filtering with short stem 150 mm 292 funnels, filtering with short stem 200 mm 293 funnels, separating with stop cock and interchangeable stopper, globe shaps corning 250 ml 294 funnels, separating with stop cock and interchangeable stopper, globe shaps corning 500 ml 295 funnels, buchner type, with sintered disc 92mm 296 flasks, separating with stop cock and interchangeable stopper, globe shape 125ml 297 flasks, separating with stop cock and interchangeable stopper, globe shape 250 ml 298 flasks, separating with stop cock and interchangeable stopper, globe shape 500 ml 299 flasks, separating with stop cock and interchangeable stopper, globe shape 100 ml 300 flasks, volumetric, with interchangeableglass stopper accuracy as per class b: 50 ml 301 flasks, volumetric, with interchangeableglass stopper accuracy as per class b: 100 ml 302 flasks, volumetric, with interchangeableglass stopper accuracy as per class b: 250 ml 303 flasks, volumetric, with interchangeableglass stopper accuracy as per class b: 500 ml 304 flasks, volumetric, with interchangeableglass stopper accuracy as per class b: 1000 ml 305 cylinder with spout, graduated : 25 ml 306 cylinder with spout, graduated : 50 ml 307 cylinder with spout, graduated : 100 ml 308 cylinder with spout, graduated : 250ml 309 cylinder with spout, graduated : 500 ml 310 cylinder with spout, graduated : 1000 ml 311 measuring cylinder with interchangeable stopper class a accurancy graduated in 1.0 ml labco 50 ml 312 measuring cylinder with interchangeable stopper class a accurancy graduated in 1.0 ml labco 100 ml 313 china dish : 100 ml 314 china dish : 250 ml 315 dishes ( crystalising ) 100x50 m 316 dishes ( crystalising ) 50x75 m 317 dishes ( crystalising ) 90x100 m 318 dishes, evaporating flat bottom with pour out 80x45 mm 319 desiccators with knob, cover and porcelain plate 320 distillation trap “labco” with graham condenser, interchangeable stopper for determination of moisture in lignite by distiliation process cap. 5ml with flask cap. of 500ml 321 distillation trap “labco” with graham condenser, interchangeable stopper for determination of moisture in lignite by distiliation process cap. 10ml with flask cap. of 1000ml 322 distillation trap “labco” with graham condenser, interchangeable stopper for determination of moisture in lignite by distiliation process cap. 25ml with flask cap. of 1000ml 323 glass tubing tube size 4 mm bore 5 kg 324 glass tubing tube size 5 mm bore 5 kg 325 glass tubing tube size 10 mm bore 5 kg 326 glass rod rod size 3 mm dia 5 kg 327 glass rod rod size 5 mm dia 5 kg 328 glass rod rod size 10 mm dia 5 kg 329 glass cover circular swallow type with ground glass: 100mm 330 glass cover circular swallow type with ground glass: 150 mm 331 iodine flasks with interchangeable stopper: 250 ml 332 iodine flasks with interchangeable stopper: 500 ml 333 porcelain mortar with pistil. pastel fitted with wooden handle 334 agati mortar and pistil 335 porcelain tiles glazed size 336 porcelain crucibles with lid for temperature upto 1200°c capacity 337 porcelain disc filtering perforated 338 polythene reagent bottles with wide mouth: 100 ml 339 polythene reagent bottles with wide mouth: 250 ml 340 polythene reagent bottles with wide mouth: 500 ml 341 polythene reagent bottles with wide mouth: 1000 ml 342 polythene reagent bottles with narrow mouth: 100 ml 343 polythene reagent bottles with narrow mouth: 250 ml 344 polythene reagent bottles with narrow mouth: 500 ml 345 polythene reagent bottles with narrow mouth: 1000 ml 346 polythene car buoys with washer attached lid: 1.0 lt 347 polythene car buoys with washer attached lid: 2.5 lt 348 polythene car buoys with washer attached lid: 5.0 lt 349 polythene car buoys with washer attached lid: 10.0 lt 350 polythene car buoys with washer attached lid: 20.0 lt 351 polythene buckets 10 lt 352 polythene buckets 15 it 353 polythene wash bottles 354 polythene beakers 100 ml 355 polythene beakers 250 ml 356 polythene beakers 500 ml 357 polythene beakers 1000 ml 358 polythene beakers 2000 ml 359 polythene tubing in rolls of 30 m size id / od: 3 / 5mm 360 polythene tubing in rolls of 30 m size id / od: 5 / 7 mm 361 polythene tubing in rolls of 30 m size id / od:6 / 8 mm 362 polythene tubing in rolls of 30 m size id / od: 8 / 10mm 363 polythene tubing in rolls of 30 m size id / od: 10 / 12 mm 364 aspirator bottles made of polythene with plastic screw in cap, 365 bottle alikathene squeeze with jet 366 pvc tray rigid with handle size 4 367 rubber bladder 368 rubber tubing ( pressure ) in rolls of 30 meters id / od: 5mm 369 rubber tubing ( pressure ) in rolls of 30 meters id / od: 8mm 370 rubber tubing ( pressure ) in rolls of 30 meters id / od: 10 mm 371 rubber tubing thickness 1 to 2 mm rolls of 30 mtrs od: 5 mm 372 rubber tubing thickness 1 to 2 mm rolls of 30 mtrs od: 6 mm 373 rubber tubing thickness 1 to 2 mm rolls of 30 mtrs od: 7 mm 374 rubber tubing thickness 1 to 2 mm rolls of 30 mtrs od: 8 mm 375 tubes nessler with graduation at 25 ml & 50 ml 376 test tube borosil glass thick walled: 50 ml 377 test tube borosil glass thick walled: 100 ml 378 test tube holder 379 test tube stand, plastic, polished with 6 holes and 6 pegs for holding test tubes 380 tripod stand 381 bung rubber assorted size between 5 and 20 mm dia set consisting of 10 numbers 382 spatula polished and flexible with this rounded ends, length 100 mm width 15 mm 383 scoop, made of ss, length 60 mm 384 burettle clamp metallic base with supporting rod and spring type holders for two burettes 385 funnel holder wooden, for two funnels, opening 386 pipette stand, polythene to hold 12 pipettes, 6 on either side horizontally 387 tongs ss ( stainless steel ) with flattened and curved tip length 400 mm 388 tongs blackened steel with flattened and curved tip length 400 mm 389 glass cutter 390 redwood viscosity flask 391 brush round form made of camel hair in quill holder 392 wire gauge made of galvanized iron, square mesh, and asbestos centre net size 150 x159 mm 393 cork boring machines for boring holes in cork and compressed rubber corks complete with set of nickel plated steel borers of 3 to 25 mm dia 2 nos each 394 platinum crucibles with ltd capacity 30 ml, depth 30 mm top dia. 37 mm, height 41 mm, each approx. weight 30.00 gram 395 platinum dish with crucible type lid of purity 99.95% having: capacity 100 ml, top dia. 75 mm, height 29 mm, each approx. weight 60.00 gram. 396 stopwatch digital 397 sprit lamp 398 dean &strak apparatus for determination of moisture oil ( round bottom flask capacity 500 ml, condenser & receiver 25 ml full set corning 399 asbestoses gloves 400 rubber gloves acid / alkali proof 401 tissue paper pack 402 suction bellow 403 laboratory furniture fume hood with base cabinet dimensions: 1504 x900 x 2400 mm 404 working table 405 elevated shelves ( 1800 x 300 x 620mm ) 406 chief chemist table 407 anti vibration instrument table 408 working desk 409 slotted angle racks 410 revolving stools 411 uv visible spectrophotometer 412 spectrophotometer nanocolor vis ii, 320−1100nm 413 bench top ph meter: 414 bench top conductivity meter, 415 dissolved oxygen meter for ppb level measurement for boiler water application 416 turbidity meter 417 standard test nanocolor silica cat no: 91848, , package unit 250 test ( s ) 418 standard test nanocolor ortho phosphate cat no: 91878, package unit 500 test ( s ) 419 standard test nanocolor hydrazine, cat no: 91844, package unit 250 test ( s ) 420 standard test nanocolor ammonium, cat no: 91805package unit 100 test ( s ) for boiler water 421 standard test nanocolor iron, cat no: 91836package unit 250 test ( s ) 422 standard test nanocolor copper, cat no: 91853package unit 250 test ( s ) 423 reagents visocolor powder pillows silica lr, photometric test, cat no: 936224package unit 100 test ( s ) 424 reagents visocolor powder pillows iron, photometric test, cat no: 936227package unit 100 piece ( s ) 425 reagents visocolor powder pillows silica hr, photometric test, cat no: 936225package unit 100 test ( s ) 426 standard test nanocolor ortho phosphate, cat no: 91877package unit 500 test ( s ) 427 standard test nanocolor chlorine  /  ozone, cat no: 91816package unit 250 test ( s ) 428 standard test nanocolor iron, cat no: 91836package unit 250 test ( s ) 429 reagents visocolor powder pillows total chlorine, 1000 tests, photometric test, cat no: 936221.1package unit 1000 test ( s ) 430 reagents visocolor powder pillows iron, photometric test, cat no: 936227package unit 100 piece ( s ) 431 standard test nanocolor nitrate z, cat no: 91863package unit 500 test ( s ) 432 standard test nanocolor ammonium, cat no: 91805package unit 100 test ( s ) for etp water samples 433 distillation apparatus for ammonia sample preparation 434 standard test nanocolor chromate, cat no:91825package unit 250 435 standard test nanocolor cyanide, cat no: 91830package unit 250 test ( s ) 436 reagents visocolor powder pillows free chlorine, 100 tests, photometric test, cat no: 936220package unit 100 test ( s ) 437 reagents visocolor powder pillows nitrate, photometric test, cat no: 936226package unit 100 test ( s ) 438 reagents visocolor powder pillows sulfate, photometric test, cat no: 936223package unit 100 test ( s ) ...

Due Date : February 16, 2022

Tender Value : ₹ Ref. Documents

View Tender
8
Department of Higher Education - Uttar Pradesh

30601137 bids are invited for gauging trowel with metal blade ( karni ) blade material: iron, weight: 150 gram, blade length: 100 millimeter, handle material: wood, thickness: 2 millimeter, size / dimension: 6 inch, finishing: dull chrome, dull chrome: natural , standard spatula steel blade with wooden handle 4 inch, 6 inch , stainless steel scale isunia ) dimension: 12 inch ( 30cm ) , type of steel scale ( graduation on both edges ) l aa, steel scale confirming to is:1481: yes, material: spring steel , concrete testing cylinder would size 150x300mm , concrete testing cube mould size 150x150x150 mm , electronic balance ( weigth machine 5kg, 25kg , vicat needle appratus ( cement ) material : brass accessories inclusive in the scope of supply : setting needle , mould and glass plate , a frame , needles plunger , movable rod , graduated scale , vicat mould , operation manual isi marked : yes, application laboratory, height 40 millimeter rate of fluid displacement ( cubic cetimetre / minute ) 50 test fluid glycerin glass thickness 12 millimeter top diameter 60 millimeter bottom diameter 70 millimeter roll diameter 10 rotation speed ( rpm ) 20 vicat mould 70 millimeter, weight:200 gms, power source na needle thickness 1 millimeter load weight 5 newton surface finish polished needle length 40 millimeter base plate area 5x5 inch plunger weight 300 gram material brass automation manual, color:as per buyer choice, packaging corrugated box, features: compact design, lightweight, non porous base plate, accessories: inclusive in the scope of supply setting needle, mould and glass plate, a frame, needles plunger, movable rod, graduated scale, vicat mould, operation manual , le chatuers apparatus ( cement ) split cylinder material : brass cover plate weight ( min ) : 75 gram plate size : 35mmx35mm accessories included : glass plates , plastic carrying case , lead weight, confirmity to indian standard is 269, is 712, is 5514, is 1727, is 2645, is 6932 ( part ix ) confirmity to standard na, application for determining the soundness of cement and hydrated lime split cylinder material brass, internal diameter of mould 30 millimeter wall thickness of mould 0.5 millimeter cover plate weight ( min ) 75 gram plate size 35mmx35mm, outer side of the mould to the end of indicator 150 millimeter diameter of the mould to end of indicator 2 millimeter raising the temperature of water to boiling ( + / 5 min ) 30 minute if any other, please specify else mention na na split ( max ) 0.5 height of mould 30 millimeter, accessories included glass plates, plastic carrying case, lead weight , tensile ( briquette ) testing machine with mould ( cement ) vertical clearance, minimum : 800 millimeter load accuracy : + / 1% of indicated load ( class 1 ) as per is 1608 maximum capacity, kgf : 200 load resolution, kgf : 0.1 horizontal clearance, maximum : 400 millimeter operating mode : manual body material : mild steel cross head speed : variable, power supply 440v ac, 1.5 kw displacement resolution 0.1 millimeter vertical clearance, minimum 800 millimeter load accuracy + / 1% of indicated load ( class 1 ) as per is 1608 maximum capacity, kgf 200 load resolution, kgf 0.1 horizontal clearance, maximum 400 millimeter, frame dual column with normal screw and supporting pillars operating mode manual body material mild steel cross head speed variable, certification if any else write na iso:9001 packaging type box weight 2000 kilogram , aggregate gi tray for lab rectangular 13x18inch , picnometer botte base shape: round, apex hole diameter: 6 millimeter, aggregate size ( max ) : 10 millimeter, bottle material : glass, seal material: rubber washer cone material:brass , slump test apparatus ( concrete ) bottom diameter : 200 millimeter, height : 300 millimeter, top diameter : 100 millimeter, material: as per is:7320 latest, temping rod: as per is:7320 latest, bottom diameter: 200 millimeter, tolerance: as per is:7320 latest, height: 300 millimeter , weight: 4 kilogram, top diameter:100 millimeter, scope:used for determining the slump of fresh concrete as a measure of its consistency , compression testing machine for concrete capacity : 200 least count : 1 kilonewton piston stroke : 100 rated pressure ( hydraulic pump ) : 10 automation : automatic motor power : 1 material : stainless steel display type : lcd connectivity : rs232 warranty : 12 month certification : iso , application evaluate static compressive strength of materials, capacity 200 least count 1 kilonewton piston stroke 100 rated pressure ( hydraulic pump ) 10 automation automatic piston diameter 234 millimeter accuracy class class 1 motor power 1, overall dimension 1000x1200x600 material stainless steel weight 50 kilogram, power source 230 volts, 50 hz, single phase ac supply, display type lcd display size 10 millimeter, accessories operational manual, carrying case , g.i. sieve set for aggragate product: sieves as per is:460 ( part 2 ) 1985, bis marked : yes, shape of test sieves : round, nominal size of test sieves ( in mm ) : 450, material of wire cloth : na for perforated plate, material of perforated plate:galvanized steel sheet, application: for use in testing in the classification of materials according to particle size, shape of test sieves:round, nominal size of test sieves ( in mm ) :450, shape of aperture provided in perforated plate square: hole ( c ) , thickness of perfortaed plate ( in mm ) :1, nominal aperture size of holes with tolerance for perforated plate ( in mm ) :1.00 ± 0.07, nominal pitch of hole for perforated plate as per clause 3 of is :460 ( part 2 ) 1985 standard provided: yesarrangement of holes in perforated plate: square holes in line , with their mid points at the vertices of squares, frame material of test sieves: galvanized steel sheet, frame material thickness ( in mm ) : 1, depth from top edge to sieving surface ( in mm ) : 50, dimensional of test sieves ( l x w x h ) ( in mm x mm x mm ) : 450 x 450 x 60, weight of test sieves ( in gm ) : 600, marking / labelling on test sieves provided: yes, sieve: 300mm dia which include 63, 40, 20, 16, 12, 10, 4.75, 2.36 mm , concrete curing tank ( bath tube ) automation grade:automatic, display:digital, cube mould size:150 millimeter, no of moulds accommodated:12, outside length:900 millimeter, outside height:400 millimeter, outside width:600 millimeter, features: warm water method , accelerated curing tanks with refrigeration system for low temperature , temperature is controlled with closed loop pid controlled digital thermoregulator with accuracy of + / 2 degree celsius , temperature controller cum indicator , digital controller , adjustable temperature, accessories included: hinged lid , heater , thermostat , recirculated pump , rubber hand gloves , low water level cut off device to safeguard heaters against low water level burn out in built refrigeration system for curing at 27 deg c , circulating pump, curing temperature for grey cement ( + / 2 degree celsius ) , degree celsius: 27, curing temperature for concrete ( + / 2 degree celsius ) , degree celsius: 100, display:digital, interior material:stainless steel, time of mixing, cycle: 24, cube mould size: 150 millimeter, no of moulds accommodated: 12, surface treatment: powder coating, outer material: stainless steel, phase: 1, frequency: 40 hertz, voltage, volt: 210 440, temperature range:from ambient to 60 degree celsius , vee bee consistometer test cylinderical container with wing nuts to vibrating table , air permeability apparatus automation grade: manual, accessories inclusive in the scope: graduated cylinder, surface finish: color coated, application: determination of permeability coefficient by falling head method, automation grade: manual, mould material: as per is:2720 part 17 ( latest ) . tubing material:glass, compaction rammer: as per is:2720 part 17 ( latest ) , maximum soil particle size: 10 millimeter, porosity ( mu ) : 5, mould extension collar dimensions: as per is:2720 part 17 ( latest ) , display type: analog, tubing size:5 millimeter, capacity :100 gram, mould dimensions: as per is:2720 part 17 ( latest ) , permeability range ( centimeter / second ) : 10 3, working pressure :0.1 megapascal, power source:220 v ac, 50 hz single phase, weight: 10 kilogram, overall dimension : 15x15x10, material : stainless steel , cement autoclave lid : stainless steel 04 sample stand : stainless steel 04 safety valve : stainless steel 04 steam vessel : stainless steel 04, compliance to astm astm c 151, astm c 141, na confirmity to indian standard is 14345, is 1570, is 2062, is 4031, is 1624, temperature control system provided yes autoclave pressure drop in 90 mins after the heat supply is shut off 2.0 mpa to less than 0.06 mpa scale division, mpa ( max ) 0.04 gauge pressure nominal diameter ( approx ) 114 millimeter gauge pressure, mpa 4.1 heat time ( approx ) at gauge pressure of 2 mpa 75 minute, rupture disk temperature 216 degree celsius automatic pressure switch shall maintain the gauge pressure for atleast 3 hours ( + / 0.1 ) 2 mpa error in gauge ( max ) at the operating pressure of 2.0 mpa + / 0.02 mpa, voltage ( volt ) 220 440 frequency 50 hertz , concrete mixture machine electric manual mini, capacity 90 liters , concrete vibrator table machine single or three phase electric, size 10ftx3 ft , concrete compaction factor apparatus material : mild steel , automation grade : manual, volume of compation mould ( cubic centimeter ) : 1000, size of compaction mould: 100 millimeter, isi marked : yes, hammer diameter: 50 millimeter, automation grade: manual , surface treatment: powder coated, hammerweight: 2.5 kilogram, compaction rammer fall height:300 millimeter, height of compaction mould: 123.8 millimeter, size of compaction mould: 100 millimeter, sieve size:5 millimeter, number of buckets: 1 , concrete test rebound hammer display of rebound value reading : digital impact energy ( approximate ) ( nm ) : 2.207 to 2.25 maximum thickness of structural component for testing : 100 mm and above lowest measurable compressive strength : 5 megapascal highest measurable compressive strength : 100 megapascal resolution ( in rebound index number, r value ) : 1 accuracy ( in rebound index number, r value ) ( when tested on calibration anvil at 80 ) : 2 type of display : lcd display backlight : no digital graphical display : no standard accessories inclusive in the scope of supply : carrying case , battery charger for rechargeable batteries with usb cable battery life under continuous operation : 4 hour minimum operating temperature : 5 degree celsius maximum operating temperature : 55 degree celsius ingress protection : ip 55, application to measure the surface hardness of the concrete surface, which can be correlated to the in situ compressive strength of concrete close to the surface. display of rebound value reading digital impact energy ( approximate ) ( nm ) 2.207 to 2.25 maximum thickness of structural component for testing 100 mm and above lowest measurable compressive strength 5 megapascal highest measurable compressive strength 100 megapascal resolution ( in rebound index number, r value ) 1 accuracy ( in rebound index number, r value ) ( when tested on calibration anvil at 80 ) 2 , sieve shaker machine ( aggregate ) automation type : electromagnetic noise ( db ) : 50 frequency : 50 hertz motor horsepower : 2 horsepower voltage : 220 volt complete unit warranty : 12 month, application laboratory automation type electromagnetic colour grey material mild steel, noise ( db ) 50 frequency 50 hertz motor horsepower 2 horsepower voltage 220 volt, weight 50 kilogram diameter 200 millimeter, certification of product sieve analysis certification number and date 4134 01 / 04 / 2021 , flow table set for concrete size ( length ) : 17 centimeter, weighing capacity : 50 kilogram, size ( height ) : 12 centimeter, application: used for determining the flow of fresh mixed concrete, certification: iso, type of testing machines eddy current dynamometer, overall dimension: 25x17x12cm, weight: 10 kilogram, conformity to standards: is : 1199 ( part 2 ) , isi marked: no , digital balance read out:0.001g weighing range:240g total quantity : 1...

Due Date : January 15, 2022

Tender Value : ₹ 20 Lakhs

View Tender
9
Department Of Agriculture - Uttar Pradesh

29720101 bids are invited for seed germinator ( single chamber ) no. of chambers: one ( heating and cooling ) .capacity: 10 cuft. ( approx ) . inside chamber : stainless steel grade 304. outside chamber: painted steel of 20swg. no. of trays: 3 adjustable stainless steel wiremeshtrays humidity : humidity with steam humidifierambient to 90% temperature :10ºc to 45ºc±1ºc. light level:02 light level for lighting ( manually controlled ) .compressor :hermetically sealed type of standard make.kirloskar / copeland make etc.programming:user friendly setting for temperature and humidityelectronics :micro controller based.operating voltage: 220v, 50hz ac±10% display:7 segment led display for showing process values of temperature and relative humidity. , binocular microscope: ( olympus / nicon make ) coaxail, constant voltage 6v 20 w halogen lamp size 135x125 mm., antifungal treated optics din aachromatic objectives, semi plan 4x ( n.a. 0.10 ) , 10x ( n.a. 0.25 ) , 40x ( c.n.a. 0.065 ) and 100x ( n.a. 1.25 oil immersion spring loaded ) .eyepiece: 10x ( paired ) wide field ( fn 18 ) high point. , oven electrically heated oven with thermostatic control required for seed testing laboratory. , universal moisture meter commodity calibration : food grains, pulses, oil seeds, & vegetablesseeds etc.range : 3.5 to 40% consistency:± 0.2%principle of measurement :resistancetemperature compensation: automatic with pt 100 temperature sensor.error conditions:under range, over range etc.display :2×16 character alp low battery indacation : displayed on lcd display, no displaymoisture percentage in case of low battery.rs 232 port / bluetooth :it has the provision to attach printer to print moisture %age temperature, commodityname date and time through printer / smartphone.calibration check & :provision to check the calibration as and when desired as per5.3 clause of is: 8824 1978 part 1. correction of deviationfrom factoryreading against standard reference & temperature calibration cab be done in avery user friendlyway.auto adjustment : automatic on lcd using a simple key operation. hot keys : hot keys for three crops which are programmable.keypad : membrane type keypad.averaging: customer can have averaging of number ofeading ofmoisture percentage through akey.recall facility : last reading recall facility.curve programming:curve programming for all commodities.new commodity calibration : it has facility to calibrate new commodity.data logging: it has facility to record data, which includes moisturepercentage, temp. commodity name, commodity code along with date & time. data storage capacity: it has memory of 200 readings. , refrigerator ( 165 ltr. ) double door with stabliser. , auto clave required for the sterilization of seed lab equipments to be used for the testing of seed in the lab. the vertical inner and outer body should be of stainless steel with 40 ltrs. capacity fitted with automatic cut off device and also fitted with indotoss piesostate adjust pressure between 15 to 22 psl. , moveable open trolly moveable open trolly of medium size for carrying the sample of seed in the seedtesting laboratory. , dehumidifier dehumidier is required for the seed sample storage room to maintain the required humidity in the air suitable for the seed sample stored in the room. , air conditioner window type air conditioner having capacity: 02 tons with reciprocating compresseor with stablizer. , digitalmoisture meter commodity calibration : food grains, pulses, oil seeds, & spices etc.range : 4% to 30% consistency: ± 0.5%principle of measurement : resistancetemperature compensation: automatic temperature compensation with pt 100 temperature sensor.error conditions: under range, over range etc.display : 2×16 character alphanumeric lcd display.body : moulded plastic. low battery indication : displayed on lcd display, no display ofmoistur percentage in case of low battery.rs 232 port: it has the facility to connect printer to print moisture %age temperature, commodityname, commodity code, date andtime.recorded data can be transferred to throughrs.232 port. calibration check & : provision to check the calibration as and when error correctiondesired as per 5.3 clause of is: 8824 part 1.correction of deviationfrom factory readingagainst standard reference & temperaturealibration cab be done in a very user friendlyway.auto calibration : automatic on lcd using a simple key , mini centrifuge mini centrifuge machine is required for seed testing laboratory to separate fluid, liquid etc based on density. it should use the principle of sedimentation under the influence of gravitational force. , seed grader ( air screen clener type laboratory model ) body construction :made of teak wood & teak plycapacity:25 40 kg / hour ( based on paddy ) feed hopper :designedfor many crop seeds, with adjustable feeding control. fan :blowing air speed is regulated through a control value.size ( l x b x h ) :80 x 54 x 75cm ( approx ) screen area:30 x 25.4 cm ( approx ) no of working screen :twomotor:½ hp single phase.handle :for manual operation of the machine.operation:manually / electrically.collection trays :one each for under size, over size & graded / cleanseeds.operating voltage:220v, 50hz ac.operation. ( without srew driver ) . when opening the equipment or using a srew reading inamoisture meter gets disturbedwith a passage of time, there is a provision f checking this and correcting it to factory setting. hot key: hot keys for three crops which are programmable.keypad : membrane type keypad.averaging : customer can have averaging of number of reading ofmoisture percentage through akey.recall facility: last reading recall facility.curve programming:curve programming for all commodities.new commodity calibration : it has facility to calibrate new commodity.data logging : it has facility to record data, which includes moisturepercentage, temp. commodity name, commodity code alongwith date & time. data storage capacity: it has memory of 200 readings. , balance single pan ( table top weighing scale ) standard features:maximum capacity :6 kgpower supply :ac 230v+10%50 60 hz and withbuilt in rechargeable built inrechargeable battery for continuous use.readability:0.5 gmpan size :275×220 mmdisplay :lcd display operating temperature : 5 degree to 40 degree celsiuscalibration :external calibration battery display, usbinterface high resolution up to 30, 000 counts. , ph meter suitable ph meter with range of 0.0 to 14.0 ph and 0 to 50 degree celsius temperature with accuracy ± 0.1 ph and battery operated. , uv lamp ultra violet lamp required for testing purpose of seeds in the seed testing laboratories. , seed hand test sieves ( round brass ) a required set of sieves to experiment with various separations and select the correct sieves for each cleaning problem. frame of sieves are made of brass. sieve are made of zinc plated m.s.a ) dia 8×2 ( aprox. ) set of four sieves with top lid & bottom panb ) dia 12×3 ( aprox. ) set of four sieves with top lid & bottom pan , seed sieve shaker vibratory screen shaker to accommodate 10 screens and one blank bottom pan with tie rod, variable variation speeds can be achieved as per requirement of seed to be cleaned. complete with electric motor.specification:material of construction : ms sheet fabricationadopter : aluminum castingvibration: by means of cammotor :¼ hp, single phasesieves : g.i.sieves ( 10 nos of sieves sizes:1.6mm rh, 2.4mm rh, 2.8mm rh, 3.5mm rh, 4.0mm rh, 6.0mm rh, 1.85mm oh, 2.0mm oh, 2.25mm oh and 2.5mm oh. ) , seed herbarium model a suitable seed herbarium model required for seed testing laboratory. , water sprinkler water sprinkler system required for the seed testing lab and should be fitted with suitable pump, pressure gauge, hdpe / puc pipes, sprinkler nozzles, by pass vlave, filteration system, control valves etc. , sample pan lab alumimum sample pans to be used in the seed testing laboratory. , forceps non disposable forceps should withstand various kinds of physical and chemical effects of cleaning agents and sterilization methods. made of high grade carbon steel, which ensures they can withstand repeated sterilization in high temperature autoclaves. , water distillationunit fully automatic water distiller, cap. 4 ltr per hour with built in 08 ltr storage tank. automatically controlled water distiller made of high quality stainless steel. designed for producing high purity distillate with full time personnel control. fitted with automatic water switching and power cut off, electronic water level switch, automatic thermostatic cut off safety system, all material contact water made of stainless steel. it should operate on voltage: 230v / 50 60 hz. total quantity : 1...

Due Date : November 19, 2021

Tender Value : ₹ Ref. Documents

View Tender
11
Rajya Krishi Utpadan Mandi Parishad - Uttar Pradesh

27432333 supply and installation of test laboratory in kisan mandi bhawan vibhuti khand gomti nagar lucknow . 2 riffle sample divider 13 mm slot width having 14 slots and approximate 2.1 dm3 capacity as per is: 1607, is: 2720 3 riffle sample divider 25 mm slot width, having 16 slots and approximate 4.4 dm3 capacity as per is: 1607, is: 2720 4 thickness gauge as per is: 2386 ( part 1 ) 5 digital gauge as per is: 2386 ( part 1 ) 6 digital gauge as per is: 2386 ( part 3 ) 7 cylindrical metal measures 3, 15 and 30 litres capacity as per is: 2386 ( part 3 ) 8 crushing value apparatus 15 mm id and 100 mm id as per is: 9376 9 aggregate impact tester as per is: 9377 10 pycnometer one liter capacity as per is: 2386 ( part iii ) 11 test sieves as per is: 460 having 300 mm dia frame of sizes 100 mm, 80 mm, 63mm, 50 mm, 40 mm, 20 mm, 10 mm, and 200 mm dia frame of sizes 10 mm, 4.75 mm, 3.35 mm, 1.18 mm, 600 micron, 300 micron, 150 micron, 90 micron and 75 micron. 12 motorised sieve shaker to accommodate opto 9 sieves of 200 mm dia. 13 electrically operated digital universal testing machine 400kn capacity having 3 ranges of dials 0 100kn, 0 200 kn and 0 400 kn 14 digital compression testing machine electrically operated 2000 kn capacity having 3 ranges of dials 0 500 kn, 0 1000 kn and 0 2000 kn, maximum vertical clearance 350 mm, maximum horizontal clearance 400 mm plate size 350 mm square conforms to is: 516, is: 14858 calibrated to an accuracy of±1% indicated load with in range. 15 cube moulds 150x150x150 mm size conforms to is: 516, is: 10086 16 slump apparatus conforms to is: 7320 17 digital test hammaer ( rebound hammer ) of impact energy 2.207 n.m. ( 0.225 kgm ) as per is: 13311 ( part 2 ) 18 flow table as per is: 1199 19 concrete penetrometer as per is: 8142 20 air entrainment as per is: 1199, is: 10079 21 laboratory concrete mixer 100 litres capacity as per is: 1791 22 beam moulds 100x100x500 mm size and 150x150x700 mm size as per is: 516, is: 10086 23 tamping bar steel, 25x25 mm square ramming face, 400 mm long, 2 kg in weight as per is: 10086 24 cylinder moulds 150 mm x300 mm high as per is: 10086 25 curing tank to maintain water temperature 270c±20 c and accommodate 12 cubes of 150 mm size or 24 cubes of 70.6 mm size. 26 accelerated curing tank for warm water method test range 55±20c. accommodate 12 cube moulds of 150 mm size 27 graduated cylinder of glass 100, 250 and 1000 ml capacity. 28 electronic balance capacity 300 gmx0.01 gm, pan size 116 mm dia. 29 electronic balance capacity 600x0.01 gm, pan size 240x210 mm dia. 30 electronic balance capacity 20 kgx 1 gm, pan size 290x210 mm. 31 laboratory electric oven thermostatically controlled range 500 to 2500c 10 with air circulating fan inside size 450x600x450 mm 32 electric oven, thermostatically controlled upto 2500c, chamber space about 40x60x40 cm. 33 graduated measuring cylinders 50 ml, 100 ml, 250 ml, and 1000 ml. 34 miscellaneous items such as mixing trays, rice trays, karni etc. 35 le chatelier apparatus as per is: 4031 36 vicat apparatus as per is: 4031 37 vibration machine with 6 moulds as per is: 4031 38 hot plate, with energy regulator 300x450x180 mm of 2 0 kw. 39 stop watch, digital 1 / 10 sec. 40 hydraulic jack hand operated remote control type astm, d 1143 2000 kn capacity, 150 mm lift. 41 rice trays of about 25 mm dia. 42 g.i. sheet mixing trays of size 700 mmx 1000mmx80mm height 43 shawals, spatulas hammer etc 44 bitumen / maxphalt contant in road work test apparatus as per is code...

Due Date : April 05, 2021

Tender Value : ₹ Ref. Documents

View Tender
12
Geological Survey Of India - Uttar Pradesh

25953305 nylon cloth , test sieve and sieve holders nylon cloth , test sieve and sieve holders . , core barrel: , nylon cloth mesh size 15 20 micron width 110 cm , nylon cloth mesh size 10 micron width 110 cm , standard test sieve made of brass frame 4 inches diameter , mesh size 15 microns . , sieve holder for nylon cloth made of acrylic pipe ( inner diameter and height 9 cmx5 cm ) with screw type cap . ...

Due Date : November 24, 2020

Tender Value : ₹ Ref. Documents

View Tender
14
National Thermal Power Corporation Limited - Uttar Pradesh

24864456 procurement . of civil items for testing facilit , impact tester complete assembly , cement :aggregate crushing value assy , los angles abrasion testing machine , sieve shaker complete assy . , test sieve: brass , d 8 , complete set , test sieve:g . i:comp set , pycnometer confirming to is:2386 part3...

Due Date : July 23, 2020

Tender Value : ₹ Ref. Documents

View Tender
15
National Thermal Power Corporation Limited - Uttar Pradesh

24037267 procurement of lab equipment for fqa department at ntpc tanda , concrete:compressive strenth testing m / c , compression proving ring:comp assy , :curing tank:std: , soil test eqpt:liq limit assy , test sieve: brass , d 8 , complete set , cement conc test eqpt:autoclave test m / c , asphalt content tester:comp assy , cement & concrete test eqp vibrating m / c , :humidity chamber:std: , oven:standard medium:...

Due Date : May 05, 2020

Tender Value : ₹ Ref. Documents

View Tender
17
Department Of Food And Public Distribution - Uttar Pradesh

23280398 purchase of various instruments and furnishing of lab: cooling centrifuge , a sugar analyzer , tube furnace, uv vis spectrophotometer, fume hood, aas upgradation, vibro screen sieve shaker, standard test sieve, bench top centrifuge , rotational viscometer , instrument engineering lab, standard quartz plates, handheld hart, liquid ( silicon oil ) temp. bath...

Due Date : January 29, 2020

Tender Value : ₹ 56 Lakhs

View Tender
20
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

22870148 supply of various consumables 1 electric lube oil pump specifications flow rate : 15 lpm, motor: 1 / 2 hp 220 v ac 6 amp, mechanism : gear pump, suction pipe : 34 long, bung adaptor : 2 threaded, house : 3 / 4 x 8, inlet : 1 npt, outlet : 3 / 4 npt, max vicosity of oil : sae 90, max working pr. : 65 psi ( 4.5 bar ) , dispensing nozzle : ball valve power cable length min : 15, thermal protection : yes 2 electric lube oil pump specifications flow rate : 25 lpm, motor: 1 / 2 hp 220 v ac 6 amp, mechanism : gear pump, suction pipe : 34 long, bung adaptor : 2 threaded, house : 3 / 4 x 8, inlet : 1 npt, outlet : 3 / 4 npt, max vicosity of oil : sae 90, max working pr. : 65 psi ( 4.5 bar ) , dispensing nozzle : ball valve power cable length min : 15, thermal protection : yes 3 unified screw pitch gage set, range : 4 42 tpi, series : 188 111, make : mitutoyo 4 metric screw pitch gage, range : 0.35 6 mm, series : 188 130, make : mitutoyo 5 vernier callipers, graduation : 0.02 mm range : 0 300 mm, series : 530 109, make : mitutoyo 6 depth micrometer, graduation : 0.01 mm range : 0 50 mm, series : 129 113, make : mitutoyo 7 cordless telephone sim based coldless telephone, make : vision tek / equivalent 8 4g wi fi modem model no. e8372 4g wi fi enabled, make : huawei / equivalent 9 silica gel 10 sim based cordless telephone model no. gsmfwp21g, make : vision tek / equivalent 11 type ii d link modem , model dsl no. 2750u, wireless n 300adsl 2+ router, make : d link 12 d link cat 6 cable, make : d link 13 d link switch 8 port dgs 1008a, make : d link 14 intercom telephone set, make : beetal / equivalent 15 hdmi cable / hdtv cable 1.4 v for full hd 1080p ( length 3 mtr ) , make : advanced 16 rj 45 connectors, make : standard 17 model bm101b 13.5v 15a battery charger, make : motorola / equivalent 18 adopter 12v ( 1 a ) ( double pin ) for modem, make : standard 19 usb 4g modem, make : intex / equivalent 20 telephone drop wire, 2 pair, copper, make : standard 21 line lead for telephone set with rj 11 connector on both side, make : standard 22 love joy coupling l 100 23 star rubber spider for coupling l 100 24 love joy coupling l 110 25 star rubber spider for coupling l 110 26 love joy coupling l 150 27 star rubber spider for coupling l 150 28 metalic putty for pressure 160 kg / cm² amd temperature 545°c 29 3m scotch weld nitrile high performance adhesive performance 91099 ) light tan 5oz pressure 6 kg / cm² amd temperature 80°c 30 rustoline 31 wd 40 spray ( 420ml pack ) 32 silica gel size should be 8 10 mm2 33 araldite resin and hardener 200 gm each 34 corium z105 can 500 ml 35 corium z107 can 500 ml 36 corium z127 can 500 ml 37 corium z 202r can 500 ml 38 epdm tape voltage grading 11kv 39 pvc tape of different color 15 no. ryb each 40 fuse 2a cylindrical hrc type 41 fuse 4a cylindrical hrc type 42 fuse 6a cylindrical hrc type 43 fuse 10a cylindrical hrc type 44 fuse 16a cylindrical hrc type 45 fuse 25a cylindrical hrc type 46 fuse 32a cylindrical hrc type 47 dc moving coil ammeter with external shunt to read the float charger dc output current 0 50adc am1 48 dc moving coil ammeter with external shunt to read the float charger dc output current 0 75adc am2 49 silica gel breather pot as per sample 50 cotton dhoti 51 amber bottles for transformer oil sampling 1000 ml 52 carbon filled ptfe rod bar, dia 50 mm length 12 inch 53 white ptfe teflon coated gland packing rope size 5mm make : duroalon 54 convertor, falcon 100, 4 to 20ma to rs 485 convertor, i / p supply 230v ac, make : falcon 100 55 hexin interface convertor with usb sl. adaptor, modle no. 485 sl. no. 91a163901442, make : hexin 56 dongle, a : 4g wifi data card, make : huawei 57 rs 232 to rs 485 convertor, model sc04u, make : sun telequip 58 power adaptor along with power cable, model no. ea 10681n 120, input 100 240v, 2amp, 50 60hz, output 12v dc, 1amp, make : edac power elec. 59 power adaptor, model no. etaou83iwe, input 100 240v, 0.15amp, 50 60hz, output 5v, 1amp dc, make : samsung 60 ups, i / p 240 v ac, o / p 240 v ac, 50 hz 1 ph o / p power 600 v a / 360 watt, make : microtek / reputed firm 61 ups, model no. ups tge 1000 + / 24 v i / p 240 v / 4.74 a ac, 50 hz 1 ph o / p 240 v / 4.54 a ac, 50 hz 1 ph capacity 1000 va / 800 watt, dc bus reading 24 v dc 16 + 1a, make : microtek / reputed firm 62 shielded power cable, 4 core, 1.5 mm shielded signal cable, make : standard 63 8 inch wired test sieve with lid and collecting pot ( as per is no. 460, part 3 ) , bss 200 mesh size ( 75 micron ) , make : techno, best, a.s.e.w. or any other standard make 64 8 inch wired test sieve with lid and collecting pot ( as per is no. 460, part 3 ) , bss 100 mesh size ( 150 micron ) , make : techno, best, a.s.e.w. or any other standard make 65 8 inch wired test sieve with lid and collecting pot ( as per is no. 460, part 3 ) , lid and collecting pot, make : techno, best, a.s.e.w. or any other standard make 66 latex rubber bladder for gas sampling ( type 8 no. ) , any standard make 67 rubber atomizer with both ends n.r.v. for flue gas sampling, any standard make 68 pressure relief valve ( dg mc 3 pt bw b41 ) for fd fan lube oil system, nmake vickers / eaton n 69 oil level gauge ( sgr 5 ) for pa fan lube oil system, nmake hydax n 70 filter element for hydraulic coupling, model no. / sr. no. 3126248604 nmake eaton n 71 suction strainer for pa fan lop, ss 30 l ¾” bsp, 125 micronfiltration, stainless steel filtering media, make hydax n 72 suction strainer for fd fan lop, ss 60 l 1” bsp, 125 micronfiltration, stainless steel filtering media, make hydax n 73 scale deposition monitor, 1 ) single phase 230 volt ac n2 ) heat exchanger assembly along with inlet outlet flow meter & controller n3 ) 0 25 lpm flow with digital indicator pf n4 ) input, output and skin temp. controller along with sensors ( 3 nos. ) n 74 corrosion coupon racks, corrosion rack 1”line, 5 coupon holder with outer cabinet and 24 numbers ss, ms, cu, brass, yellow metal corrosion coupons 75 bio fouling monitor, delta p type, 0 60 psi pressure, 0 250 mm wc dp range, 0 16 lpm flow meter, 2 meter ½’’ ss tube 76 cation column conductivity meter, conductivity sensor type unicond sensor with ism, transmitter type multi parameter m800 with ism, nsample flow rate 150 350 ml / min sample temp 20 60°c ( 68 140°f ) , sample pressure 0.3 4 bar ( 5 58psig ) , cation resin 600 cm3, ambient operating temperature5 50°c ( 41 122°f ) , humidity, 10 90 % non condensing, dimensions ( h x w x d ) approx 900x 500x 300 mm, weight 29 kg, rating and approvals ce, power supply 100 140 vac and 200 240 v ac, 1600 w, ac freq. 50 to 60 hz, unicond sensor with ism specifications: accuracy : + / 1% for 0.02 5000 μs / cm, + / 3% > 5000 μs / cm, repeatability + / 0.25%, temperature sensor pt 1000 rtd, iec 60751, class a, with nist traceable caliberation, temperature accuracy + / 0.1 deg. c at 25 deg. c, response time 90% of value in <5 s, signal to transmitter digital n 77 ultraprobe 100 sc, detailed technical specification as per annexure 78 gate valve with following specifications: class asme 300, end connection flanged rf asme b16.5, body astm a216 wcb, bolted bonnet wcb, face to face / end to end dimension asme b16.10, name plate and identification tag as per standard, size 100 mm 79 galvanized corrugated sheet for boiler area as per attached drawing, thickness=1.5 mm, length= 2500 mm to 3000mm, width = 1000 to 1500 mm 80 metallic outer cap ( one side closed and other side open ) for different size boiler tubes as per attached drawing, material of cap = mild steel, x= internal diameter, t= thickness, l= length, cap size x= 64mm, t= 2 mm, l=30 mm, y=10 mm 81 metallic outer cap ( one side closed and other side open ) for different size boiler tubes as per attached drawing, material of cap = mild steel, x= internal diameter, t= thickness, l= length, cap size x= 77mm, t= 2 mm, l=30 mm, y=10 mm 82 metallic outer cap ( one side closed and other side open ) for different size boiler tubes as per attached drawing, material of cap = mild steel, x= internal diameter, t= thickness, l= length, cap size x= 55mm, t= 2 mm, l=30 mm, y=10 mm 83 metallic outer cap ( one side closed and other side open ) for different size boiler tubes as per attached drawing, material of cap = mild steel, x= internal diameter, t= thickness, l= length, cap size x= 46mm, t= 2 mm, l=30 mm, y=10 mm 84 metallic outer cap ( one side closed and other side open ) for different size boiler tubes as per attached drawing, material of cap = mild steel, x= internal diameter, t= thickness, l= length, cap size x= 49mm, t= 2 mm, l=30 mm, y=10 mm 85 spares of id fan hoist ( sr. no. 07 ue 12.5, capacity 12.5 ton, lifting height 18.95 mtr, hoisting speed 3 mtr / min, wire rope dia 16mm / 4 falls hoisting motor ( 10 h.p.x 2 no. ) / 1000rpm, cross transverse speed 12 mtr / min, cross transverse motor 1.5 h.p. / 1400 rpm ) , wire rope ( 100 m long ) , part no. 2, make: universal hoist o fabrik / usha martin / swift 86 spares of fd fan hoist ( fan side ) ( sr. no. 01 ue 3, capacity 3 ton, lifting height 6.85 mtr, hoisting speed 3 mtr / min, wire rope diameter 9mm / 4 falls hoisting motor 5.0 h.p., cross transverse speed 15mtr / min, cross transverse motor 0.5 h.p. ) , wire rope ( 30 m long ) , part no. 2, make: universal hoist o fabrik / usha martin / swift 87 wire rope for inhaul of wagon trippler 1&2 size 28 mm. const 6x19, lay rho, coating ungalv, core fmc, tensile strength 1770 n / mm², make : usha martin 88 hydraulic spreader, detailed technical specification as per annexure 89 hydraulic cutter, detailed technical specification as per annexure 90 rotary rescue saw ( circular ) , detailed technical specification as per annexure 91 ear plug, detailed technical specification as per annexure 92 full body harness, detailed technical specification as per annexure 93 v belt , c 128, any standard make 94 commercial r.o. system 100 lph, r.o. type electrical 95 single phasing and unbalancing preventer, 415vac, 1c / o contact type supreemo , make : alstom / siemens / abb / l&t / havells 96 mcb, 63a, 415v, ac type, 4p circuit breaker protec 25, make : siemens / abb / l&t / havells / s&s 97 mcb, 32a, 415v, ac type, 4p circuit breaker protec 25, make : siemens / abb / l&t / havells / s&s 98 mcb, 25a, 415v, ac type, 4p circuit breaker protec 25, make : siemens / abb / l&t / havells / s&s 99 mcb, 6a, 415v, ac type, 4p circuit breaker protec 25, make : siemens / abb / l&t / havells / s&s 100 category 6e+ patch cord , detaled technical specification . ( a ) meet all tia / eia 568 b, 2 1 cat 6e+ standars ( b ) factory crimped © 24awg or better copper conductors ( d ) tangle free plug design ( e ) component complaint for category 6e+ standards ( f ) rohs compliance .ul listed, make : d link / data link / mitashi, category 6e+ patch cord 01 meter 101 category 6e+ patch cord , detaled technical specification . ( a ) meet all tia / eia 568 b, 2 1 cat 6e+ standars ( b ) factory crimped © 24awg or better copper conductors ( d ) tangle free plug design ( e ) component complaint for category 6e+ standards ( f ) rohs compliance .ul listed, make : d link / data link / mitashi, category 6e+ patch cord 02 meter 102 category 6e+ patch cord , detaled technical specification . ( a ) meet all tia / eia 568 b, 2 1 cat 6e+ standars ( b ) factory crimped © 24awg or better copper conductors ( d ) tangle free plug design ( e ) component complaint for category 6e+ standards ( f ) rohs compliance .ul listed, make : d link / data link / mitashi, category 6e+ patch cord 05 meter 103 category 6e+ patch cord , detaled technical specification . ( a ) meet all tia / eia 568 b, 2 1 cat 6e+ standars ( b ) factory crimped © 24awg or better copper conductors ( d ) tangle free plug design ( e ) component complaint for category 6e+ standards ( f ) rohs compliance .ul listed, make : d link / data link / mitashi, category 6e+ patch cord 10 meter 104 category 6e+ patch cord , detaled technical specification . ( a ) meet all tia / eia 568 b, 2 1 cat 6e+ standars ( b ) factory crimped © 24awg or better copper conductors ( d ) tangle free plug design ( e ) component complaint for category 6e+ standards ( f ) rohs compliance .ul listed, make : d link / data link / mitashi, category 6e+ patch cord 15 meter...

Due Date : January 06, 2020

Tender Value : ₹ 21 Lakhs

View Tender
21
National Thermal Power Corporation Limited - Uttar Pradesh

21615601 geotechnical investigations for proposed as per approval , geotech investigation , mobilization/ demobilization charges , 150mm dia borehole ( neutral to 25m depth , excavating trial pits , field permeability test in trial pit , conducting field cbr tests , conducting electrical resistivity tests , lab . test bulk density & moisture cont . , core drilling in rock using rotary drill , lab . test sieve analysis , lab test hydrometer analysis , lab test liquid limit & plastic limit , lab test shrinkage limit , lab test specific gravity , lab test standard proctor compaction tes , lab test swell pressure , lab test free swell index , lab test unconfined compressive strength , lab test direct shear test , lab test trixial shear test , lab test one dimensional consolidation , lab test chemical analysis , conducting chemical test on water sample , labtestrock moisturecontent , porosity , den , specific gravity , hardness , soundness , slake durability index , unconfined compression test , point load strength index , impact value , taking and providing photograph...

Due Date : September 11, 2019

Tender Value : ₹ Ref. Documents

View Tender
22
National Thermal Power Corporation Limited - Uttar Pradesh

21557024 geotechnical investigations for proposed 10gw wind solar hybrid projectat rann of kutch area in gujarat as per bidding document no . re cs 0000 geo 4 . , geotech investigation , mobilization / demobilization charges , 150mm dia borehole ( neutral to 25m depth , 150mm dia borehole ( 25m to 50m depth ) , excavating trial pits , field permeability test pump in test , conducting field vane shear test , conducting field cbr tests , conducting electrical resistivity tests , lab . test bulk density & moisture cont . , lab . test sieve analysis , lab test hydrometer analysis , lab test liquid limit & plastic limit , lab test shrinkage limit , lab test specific gravity , lab test standard proctor compaction tes , lab test swell pressure , lab test free swell index , lab test unconfined compressive strength , lab test direct shear test , lab test trixial shear test , lab test one dimensional consolidation , lab test chemical analysis , conducting chemical test on water sample...

Due Date : September 10, 2019

Tender Value : ₹ Ref. Documents

View Tender
23
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

21156465 supply of lab equipments and lab items for htps kasimpur 1 muffle furnace ( with digital pid control ) size200x200x300mm ) capacity 5kw, temp range 1000 1400°c any standard make 2 electric motorized sieves shaker any standard make 3 laboratory oven ( with digital controller ) any standard make size 24x24x24 , temp range upto 250°c any standard make 4 weighing balance capacity 50 kg , least count 1gm any standard make 5 weighing analytical balance capacity0to 50 230 gm , least count 0.0001gm any standard make 6 petri dish ( size100 mmx15mm ) any standard make 7 silica crucible ( 15 ml ) any standard make 8 v.m. crucible with lid any standard make 9 v.m. crucible stand any standard make 10 spatula any standard make 11 tongue curved any standard make 12 tongue long size ( stainless steel ) any standard make 13 test sieves brass ( 20cm ) 212micron any standard make 14 sieve set with lid & bowl ( mesh size 50 ) any standard make 15 sieve set with lid & bowl ( mesh size , 100 ) any standard make 16 sieve set with lid & bowl ( mesh size , 200 ) any standard make...

Due Date : August 26, 2019

Tender Value : ₹ 3.69 Lakhs

View Tender
24
Uttar Pradesh State Sugar Corporation Limited - Uttar Pradesh

19001884 supply and installation of various equipment etc. for soil testing laboratory at munderwa chini mill, basti in uttar pradesh, atomic absorption spectro photometer , uv visible spectrophotometer ( single beam ) , uv visible spectrophotometer ( double beam ) with additional desktop computer , flame photometer , conductivity meter , ph meter , horizontal reciprocal khan shaking machine , electronics balance , analytical balance / top loading balance m , hot air oven ( min 20 cubt fit ) , , hot air oven ( min 8 cubt fit ) , hot plate , auto analyzer with digestion block ( set ) , quartz double distillation unit, ups ( min 2.0 kva ) , brass test sieves ( set of 5 mm, 0.5 mm & 0.2 mm ) m , sampling tools ( khurpi / scoop, screw augur, tube augur, spade, stainless steel / nikcel tools, collection basket, , computer appropriate software & accessory, glass ware 1 funnel borocil 75 mm 2 beaker ( borocil ) 100 ml 3 beaker ( borocil ) 250 ml 4 beaker ( borocil ) 1000 ml 5 beaker ( borocil ) 500 ml 6 pipette ( bulb ) 50 ml 7 pipette 25 ml 8 pipette 10 ml 9 pipette 5 ml 10 pipette 2 ml 11 pipette 1 ml 12 spetula nos. 13 glass rod nos. 14 measuring cylinder 25 ml 15 measuring cylinder 10 ml 16 measuring cylinder 50 ml 17 measuring cylinder 100 ml 18 volumetric flask 25 ml 19 scuker bulb 5 ml 20 conical flask 500 ml 21 conical flask 100 ml 22 burette 100 ml 23 burette 50 ml 24 test tube 25 ml 25 ph electrode 26 descicator 27 sieve for soil preparation 36 mesh 28 reagent bottle 500 ml 29 reagent bottle 250 ml 30 reagent bottle 125 ml 31 reagent bottle 1000 ml 32 tissue paper nos. of roll 33 pvc pipe mt. 34 volumetric flask 1000ml 35 volumetric flask 500ml 36 volumetric flask 250ml 37 whatman no 1 dia 125mm 38 projection lamp 39 weight box up to 100gm 40 ci weight 2 kg 41 match pair cuvett 1 cm 42 dropping bottle 100 ml...

Due Date : January 26, 2019

Tender Value : ₹ 35 Lakhs

View Tender
25
Department Of Agriculture And Cooperation - Uttar Pradesh

16729996 supply of calibrations of instruments glasswares, 1 burette cap. ( 2ml, 50ml ) 2 tap of clevenger cap. ( 5 ml ) 3 tap of dean & stark app. ( 5 ml ) 4 one mark pipette cap. 25ml, 50ml, 100ml, 5 graduated pipette 10 ml 6 volumetric flask, ( 25ml, 100ml, 200ml, 250ml, 500ml ) 7 specific gravity bottle ( 50 ml ) 8 graduated measuring cylinder ( 25ml , 50 ml, 250 ml ) 9 glass thermometers ( 0 500c and 0 3600c ) 10 temperature humidity meter ( 0 500c, 0 100% ) 11 weight box 12 test sieve 1.18 μ 1 muffle furnace 2 digital balance ( 200 gm ) 3 oven...

Due Date : July 17, 2018

Tender Value : ₹ 25000.0

View Tender
27
Department Of Agriculture And Cooperation - Uttar Pradesh

16528117 supply of calibration of glasswares and instruments, : on site callibration: s.no item ( instruments ) quantity 1 muffle furnace 01 2 digital balance ( 200 gm ) 01 3 oven 01 1 burette cap. ( 2ml, 50ml ) 2 tap of clevenger cap. ( 5 ml ) 3 tap of dean & stark app. ( 5 ml ) 4 one mark pipette cap. 25ml, 50ml, 100ml, 5 graduated pipette 10 ml 6 volumetric flask, ( 25ml, 100ml, 200ml, 250ml, 500ml ) 7 specific gravity bottle ( 50 ml ) 8 graduated measuring cylinder ( 25ml , 50 ml, 250 ml ) 9 glass thermometers ( 0 500c and 0 3600c ) 10 temperature humidity meter ( 0 500c, 0 100% ) 11 weight box 12 test sieve 1.18 μ...

Due Date : July 09, 2018

Tender Value : ₹ 20000.0

View Tender
28
Rural Engineering Department - Uttar Pradesh

16507296 auction sale of condemned / scrap t and p material 1 i.o.p. leveling mc 2 leveling staff 3 plan table 4 plan table staff 5 tempering plate u/s 6 trush 20’×40’ 7 props 8 steel road camber 9 surkhi mixture m/c 10. sheep foot rooler 11 plane rooler 12 ceiling fan 13 cube mould 15’×15’ 14 enamil tray 15 stump with gradute tempering road 16 weight 17 density basket 18 electronic balance 19 counter balance 20 c.sand test sieve g.i. sheet 30 cm. 21 sieve shaker 20 mm. 22 f sand test seive 23 aggregate impact value 24 rebonded test hammer , 25 rodo meter 26 tempering rod 27 lad & pan g.i. sheet 30cm. 28 load & pour bar...

Due Date : June 30, 2018

Tender Value : ₹ Ref. Documents

View Tender
31
Uttar Pradesh Avas Evam Vikas Parisad - Uttar Pradesh

12836181 tender for determination of safe bearing capacity as per relevant is. ( drilling of 150 mm diametre bore hole in available soil carrying out s.p.t. collection of soil sample distrubed / undisturbed and laboratory test sieve analysis, atterberg’s limits, particle size analysis, natural moisture content, bulk density ( dry and wet ) , specific gravity c & 4 tests, consolidation test ( compression index value ) on clay / clay silt, as per is specification. ( 3 no bore hole depth upto 20.00 m only ) )...

Due Date : June 20, 2017

Tender Value : ₹ Ref. Documents

View Tender
32
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

11628622 supply of laboratory instruments, ( 1 humidity chamber 2 hot air oven ( for coal analysis as per is 1350 3 muffle furnace ( for coal analysis as per is 1350 ) : 4 ro tap e, test sieve shaker 5 turbidity meter: model: 2100n is ( bench type ) 5.1 light emitting division 5.2 sample cell 5.3 turbidity standard 5.4 silicon oil )...

Due Date : March 16, 2017

Tender Value : ₹ 14.43 Lakhs

View Tender