Military Engineer Services - Uttar Pradesh

39350719 tender for special rep to certain building at756 su at af station gorakhpur. ; 1 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed at site. 2 m&l for vitrifiedcoloured ceramic tiles ( dark shade ) 10 mm thick ( square / rectangular ) area of each tiles n exc 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in cm 1:6 complete all as specified and as directed. 3 ditto as above but in skirting / dado etcover 10 mm thick cement plaster 1:4, complete all as specified and directed at site. 4 m&l for non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tilesover 15 mm thick screed bed in cm 1:6 complete all as specified and as directed. 5 m&l for glazed ceramic tiles in vertical surface 300x450mm x 7mmset and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 10 mm thick rendering in cm 1:4complete all as specified and as directed. 6 m & l forchequered cement concretetile 30cmx30cmx25mm thick set and jointed in neat cement slurry and pointed with greay cemtn and pigment to match the colour of tileover 20 mm thick screed bed in cm1:6, complete all as specified and directed at site. 7 m & l for prepolishedkota stoneof 20 25 mm thick in floor over 20 mm thick screed bed incm1:4laid in jointedwith grey cement slury mixed with pigment to match the sahde of the slab. complete all as specified and directed at site. 8 m & l for prepolished kota stone of 20 25 mm thick insteps skirting, dado and pillar etc over 15 mm thick cement mortor 1:4 complete all as specified and directed at site. 9 taking downchowkats but with shutters ( without taking off shutters from frames ) n.exc 1.5 sqm each. complete all as specified and directed at site. 10 taking downchowkats but with shutters ( without taking off shutters from frames ) n.exc 1.5 sqm each, complete all as specified and directed at site. 11 m & l powder coated anodised aluminium ( sliding / hanging type ) windows / ventilator with three track bottom track size 92 x 29.5 x 2mm thick, side & top track frame size92 x 29.5 x 2mm thickand shutter aluminium anodised 39 x 20 x 2 mm thick incl necessary aluminium fittings likejointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted / plain glass inpanels incl all fittings & fixture complete all as specified and directed. 12 m & lpowder coated anodised aluminium doors ( sliding / hanging type ) with frame size 101.6 x 44.75 x 2.4mm thick and shutter aluminium anodised and lock rail 44.45x 47.62 x 2.02mm, style 44.45x 47.62 x 1.95 mm, top rail 101.60x 44.45 x 1.93mm, and bottom rail 101.60x 44.50 x 2.5 mm incl necessary aluminium fittings like aluminium butt hinges 04 nos, aluminum handles 150 mm 02 nos, aluminium tower bolts 200mm 01 nos, mortice lock 4 lever ms, , jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with panelling in two parts with 12 mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings & fixture complete all as specified and directed. 13 m & l powder coated anodised aluminium grill wt n exc 5.60 kg per sqm with all fittings & fixture complete all as specified & directed. 14 door closer aluminium die cast hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed , complete all as specified and directed at site. 15 m & l 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed at site. 16 m&l for solid pvc door frame of size 50mm x 47mm made out of 5mm single side prelam pvc sheet used instead of plain colour pvc sheet & edges will be painted to match with prelam sheet ® reinforced with m.s. square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed at site. 17 m&l for factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc prelame sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;panelling of plain colour pvc pre lamsheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed at site. 18 m&l for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass / gauge etc, withoutsash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass / gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 ( a ) of ssr part i ( 2009 ) 19 s & f pressed steel frames of sixe 125 x 60 mm for doors with one or more rebates inlcluding necessary fixinglugs, hinges, lock strike plate, etc, complete as specified. 20 s & f 30 mm thick flush shutter, solid core construction, block board core andplywood face panels, commercial type on both sides, complete all as specified and directed at site. 21 s&fixing 75mm long butt hings medium weightcold rolled mild steel and fixed, complete all as specified and directed at site. 22 s&f 125 mm long aluminum anodized barrel tower bolt of exturded section complete all as specified and directed at site. 23 s&f 125mm long aluminum handles cast type anodized fixed complete all as specified and directed at site.complete all as specified and directed at site. 24 s&f 150 mm long aluminiunm sliding door bolt with hasp and staplebolttype anf fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed at site. 25 s&f 250 mm long aluminiunm sliding door bolt with hasp and staplebolttype anf fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed at site. 26 s&f in repairs vitreous china whb, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste pipe, 32mm complete all as specified and directed. 27 s&f in repair ewc. wash down water closet pan white excl. flushing cistern & flush pipe incl. plastic water closet seat cover closed pattern with flat bottom and cover and hinging device as per manufacturer instruction incl. connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete all as specified and directed at site. 28 s&f in repairs plastic water closet seat cover, black / white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices.complete all as specified and directed at site. 29 s&f in repair pvc flushing cistern low level white, 10 ltr capacity.complete all as specified and directed at site. 30 s&f in repairthree layer rotational moulded polyethlene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in ssr part i 1000 ltrs capacity incl 20 mmball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.complete all as specified and directed at site. 31 s & f in repair 5.5 mm thick looking mirror size 600 x 450 mm ( selected quality ) mounted on 6 mm thick pvc sheetand aluminum frame all around including fixed with necessary fixing arrangements, complete all as specified and directed.complete all as specified and directed at site. 32 s&f in repair pvc toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cmmake prayag / shakti or equivalent complete all as specified and directed at site. 33 s&f in repairangle cock, long shank fancy type c.p. cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed at site. 34 s&f in repairsbottle trapsof ptmt having minimum water seal of 25mm , 32 mm , complete all as specified and directed at site. 35 s & f in repairbib tap fancy type chromium plated with lonk shank with flange screwed for iron pipe 15mm bore, complete all as specified and directed. 36 s&f in repair pvc connections 15 mm size with ptmt nuts of length 450mm long, complete all as specified and directed at site. 37 s&f in repair vitreous china ware wash hand basin 550mmx 400 mm size, white, flat back or angle including removing the existing one complete and re fixing with new bracketand making good all connections. make cera / hindware / parreware or equivalent, complete all as specified and directed at site. 38 s & f in repairs health faucet with 1 meter long easy flex tube in chrome finish and wall hook with nrv ( back flow preventer ) complete all as specified and directed at site. ( jaquar cat part no ald chr 579 ) 39 s&fin repairs pvc ( swr ) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed at site. 40 s&f pvc ( swr ) bends, 110 mm, complete all as specified and directed at site. 41 s&f pvc ( swr ) junction single, ( single tee ) equal or unequal 110mm bore all as specified and directed. 42 s&f pvc sloted vent cowl, 110 mm all as specified and directed. 43 s & f in repair for shop dish, make jaquar cat part no can 1131n, complete all as specified and directed at site. 44 s&f in repair toilet paper holder mscp complete all as spd. ( make jaquare ) cat no akb 35751 or equivalent, complete all as specified and directed at site. 45 s & f in repairfor towel rail 600mm long make jaquar cat part acn 1111sm, complete all as specified and directed at site. 46 s&f in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 47 s&f stainless steel grating doom 100 mm dia, complete all as specified and directed. 48 taking up or down 15mm dia gi steeltubingincludingconnections complete all as directed. 49 taking up or down 20 mm dia gi steeltubingincludingconnections complete all as directed. 50 s&f gi tubes, ‘mediumgrade’, galvanised, concealed with all fitting 15mm including cutting of stone , concrete block or slabwalls and making good. 51 s&f gi tubes, ‘mediumgrade’, galvanised, concealed with all fitting 20mm including cutting of stone , concrete block or slabwalls and making good, complete all as specified and directed at site. 52 s & f in repairs cast iron floor trap of 100 mm bore with grating incl jointing to waster pipe fixed incement concretetype b1 ( 1:2:4 ) , complete all as specified and directed at site. 53 taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed at site. 54 m&l for 15mm thick rendering in cm 1:4on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement . wpc @ 2% by weight to be mixed, complete all as specified and directed at site. 55 m&l for 10mm thick rendering in cm 1:6on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed at site. 56 m&l for two coats of exterior emulsion weather coat in camouflage pattern over a coat of primer on newly plastered surfaces of external wall including preparation, complete all as specified and directed at site. 57 m & l for preparation of new plastered surfaces and applying two coat of oil bond distemper over a coat of primerand 2 mm thick wall care putty, complete all as specified and directed at site. 58 m & l preparation of oldplastered surfaces of ceiling and applying two coat of white wash complete all as specifie and directed. 59 m & l preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying two one coats of exterior emulsion paint in camouflage pattern over one one coat of alkali resistant primer complete complete all as specified and as directed. 60 m & l complete removal of old treatment and preparation of surfaces and applying two coat of of oild bond distemper over acaot of primer and 2mm thick wall care putty, complete all as specified and directed at site. 61 m&l for preparation of old steel surfaces exc 10cm width or girth and applying one coat of aluminiuml paint over one coat ofaluminium red oxide primer complete all as specified. 62 m&l for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed at site. 63 m&l brickwork with subclass ‘b’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in cm 1:4, complete all as specified and directed at site. 64 demolition of concerete in ground floor and paving n.exc 15 cm thickness ( below or above ground level ) , complete all as specified and directed at site. 65 m & l for 75mm thick pcc 1:3:6 type c 2 ( 40mm graded stone agg ) as in plinth protection, complete all as specified and directed at site. 66 supply & fix in repairs200mm long stainless ( grade s 304 ) handle fancy type polished bright chrome finish, complete all as specified and directed. 67 s&f 2nd class hard wood ( sal ) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed at site. 68 dismantling of brick tiles any thickness laid, bedded and pointed in any mortar from roof ( ist floor ) ( cost of necessary scafolding and removal of the material obtained from site to outside the premises deemed to be included in the rate ) , complete all as specified and directed at site. 69 dismantling / demolition and removal of mud in roofs, any thickness, including old tarfelt, plastering / pcc and leeping of any thickness as reqd at site, complete all as specified and directed at site. 70 roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed at site. 71 m&l for 15mm thick screed bed or bedding layer of mortar in cm 1:4, using liquid water proofing compound as per manufacturers instruction, laid in roof finisshed even and smoooth without using extra cement ( wpc shall be paid separately ) , complete all as specified and directed at site. 72 supply only pidi proof 101 lw ( + ) complete all as specified and directed at site. 73 m&l for priming roof surfaces and applying a tack coat ofindustrial bitumen85 / 25 at the rate of 1.2 kg / sqm andlayingapp based polymeric membrane minimum weighing 3 kg / sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt not less than 150gms / sqm ) over roof surfacesby force application, complete all as specified and directed at site. 74 m&l for 25mm thick pcc 1:2:4 type b0 using 12.5mm graded stone aggregate finished even and fair without using extra cement as in roof, complete all as specified and directed at site. 75 m&l cement concrete tiles 25cm x 25cm x 20mm thick pointedwith grey cement and no pigment, complete all as specified and directed at site. 76 demlition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed at site. 77 m&l for providing pcc 1:2:4 type b0 using 12.5mm graded stone aggregate finished even and smooth without using extra cement as in roof kerb, coping including mixing of integral liquid water proofing compound dr. fixit pidiproof lw + as per manufacturer instructions, complete all as specified and directed at site. ( wpc shall be measured and paid for separately ) . 78 m & l for 4 mm thick linoleum plain coloured sheet and sealed down with approved adhesive, complete all as specified and directed at site. 79 s & f plates ( plain / chequered ) channels, square cut to l notched etc complete all as specified and directed at site. 80 dismantling of plain or corrugated steel / fibre sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed at site. 81 m&l pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed at site. 82 m&l framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165, complete all as specified and directed at site. 83 s&f steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed at site. 84 m&l stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed at site. 85 cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc.. to store and rubbish not exc. 50m, complete all as specified and directed at site. 86 m&l forming jambs, etc. to openings ( to foregoing item ) , including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed at site. 87 m & l for sheet glass4.0 mm thick orginary quality and glazing with oil putty in sqareexc 0.5 sqm in each pane, complete all as specified and directed at site. 88 s & f in repair 4 mm thick sheet glass ordinary quality and galzing with oil putty in squaren exc 0.50 sqm in each pane, complete all as specified and directed at site. 89 hacking outof old broken galss from metal frame including punching or drilling out of glazing, complete all as specified and directed at site. 90 s&f in repairssinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed at site. 91 m&l granite ( of any type ) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing , complete all as specified and directed at site. 92 m&l for mild steel tmtbars 6 mm to 8 mmdia r, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not lessthan 0.9mm dia or securing with clips, complete all as specified and directed at site. 93 m&l for rcc1:2:4 type b0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work inbuildingupto 7 m height incl uding use and waste of necessary formwork and scaffolding required, complete all as specified and directed at site. 94 m&l for providing pre cast rcc lintel , shelves etctype b 1 , 1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4for door and window opening including use and waste of form work, complete all as specified and directed at site. 95 m&l for providing pcc 1:2:4 type b1 using 20 mm graded stone aggregate as in hold fast filling in chowkhat etc, complete all as specified and directed at site. 96 m&l cuttingholes in brickl wall of exc half brick but not exc one brick in cement mortor for inserting holdfasts and making good dismantled portion in cemnt mortor 1:3 as required, complete all as specified and directed at site. 97 taking down copper / aluminium point wiring ( light, fan, socket or power ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed at site. 98 material and labourfor point wiring with two single core 1.5 sqmm cable ( nominal area ) stranded copper conductor, pvc insulated unsheathed cable, 1100 v grade in and including concealed pvc conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer andtwo coats of black bituminous paint for mounting fittings / junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 sqmm ( nominal area ) stranded copper conductor, pvc insulated unsheathed cable as in earth wire ( green colour ) connected to common earth dolly complete all as specified and directed for following : ( a ) one light point controlled by one switch, complete all as specified and directed at site. 99 ( b ) one fan / exhaust fanpoint controlled by one switch and one regulator, complete all as specified and directed at site. 100 ( c ) one 3 pin switch socket outlet point 5 amps on independentboard with other switch, complete all as specified and directed at site. 101 all as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size, complete all as specified and directed at site. 102 m&l switch piano flushtype single pole, one way 5 amps 230 volts ac circuit , complete all as specified and directed at site. 103 m&l for socket outlet 5 amps, 5 pin flush type multipurpose, 230 volts ac circuit complete all as specified and directed by engr in charge. 104 m&l for socket outlet 2 in 1, 3 pin 5 & 15 amps, 230 volts ac circuit, complete all as specified and directed at site. 105 m&l switch piano flush type single pole, one way 15 amps 230 volts ac circuit complete all as specified & directed. 106 supply and fix in repairs single pole and neutral sheet metal enclosure with a two pin and earth plug and socket ( metal clad ) 20 amps complete with one single pole mcb 20 amps capacity including taking down old one, complete all as specified and directed at site. 107 s & fixceiling rose surface backlite 65x50mm 3 terminals, complete all as specified and directed at site. 108 s&f recess mounting led luminaire of size 2x2white 34 watt, 230 voltsfor ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. make: havells cat part no. plutoneo2x2plr34w led840sor equivalent in bajaj / cg. 109 taking down old and u / s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed. 110 supply and fixing led lights fitting 1x 18 w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed at site. 111 taking downand refixing carefully serviceable db any type / size disconnecting and making good disturbed surfaces, complete all as specified and directed at site. 112 s&f factory made epoxy powder coated distribution board double doortp& n 4 ways ( vtpn mcb db ) with metal door ( ip 43 protection ) fabricated from minimum 1.6mm thick crca sheet and fixed flush to wall and suitable for universal mounting and including 200 amps copper bus bar, neutral bar, standard din rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knock outs complete all as specified and directed. 113 s&f factory made epoxy powder coated distribution board spn 8 ways double door with acrylic top cover ( ip 43 protection ) fabricated from minimum 1.6mm thick crca sheet and fixed flush to wall and suitable for universal mounting and including 200 amps copper bus bar, neutral bar, standard din rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed. 114 s&f in repairs mccb, 4 pole, 100 amps, 16 ka current rating with adjustable thermal and magnetic setting conforming to iec 609472 & is 139473 to be fixed in distribution board complete all as specified and directed. 115 taking down and refixing carefully serviceable mcb sp / spn / isolator of any rating / size, complete all as specified and directed at site. 116 supply and fixing mcb single pole 240 volt c curve 10 ka 5 to 32 amps capacity all as specified and directed incl taking down old one, complete all as specified and directed at site. 117 supply and fixing mcb single pole & neutral 240 volt c curve 10 ka 40amps complete all as specified and directed . 118 taking down old and u / s sub main wiring of 2 / 3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed. 119 m&l for concealed sub main wiring using two single core pvc insulated, unseathed stranded copper conductor cable of size 6.0 sqmm of voltage rarting upto and including 1100 volts drawn in and including pvc concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of pvc ( green colour ) insulated, unsheathed, stranded copper conductor of size 6.0 sqmm ( green colour ) as earth continuity conductor all as specified and directed. ( note : two runs of single core pvc cable with one run of earth conductor and conduit shall be measured as one unit ) . 120 m&l for concealed sub main wiring using two single core pvc insulated, unseathed stranded copper conductor cable of size 4.0 sqmm of voltage rarting upto and including 1100 volts drawn in and including pvc concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of pvc ( green colour ) insulated, unsheathed, stranded copper conductor of size 4.0 sqmm ( green colour ) as earth continuity conductor all as specified and directed. ( note : two runs of single core pvc cable with one run of earth conductor and conduit shall be measured as one unit ) .note for item no . 21 &22 two runs of copper conducterand one runs of earth copper conductershall be measured as one length, complete all as specified and directed at site. 121 taking down onlyair circulator fan / exhaust fan / ceilling fan any type and sizecomplete with louvers shutters , properly at directed location and handover to age ( e / m ) store, complete all as specified and directed at site. 122 supply and fixing air circulationfan 5 star rated , 450mm sweep , 230 volts, 50 hz ac, complete with blades, with and connecting up including three core pvc insulated multi stranded copper conductor cable of size 2.5 sqmm wire which shall be passed through pvc flexible conduit, from ceiling rose / connentor to fan of length not less than 1.0 meter complete all as specified and directed.make havells equivalent make : usha / bajaj / havells. 123 supply and fixing in repairsceiling fan complete with blades , down rods , electronic regulator and accessoreis , 230 volts, 1200 mm sweep. min air delivery 210 cfm with service value 6.00 bee . five star rated with brushless 5 star rated , 1200mm sweep , 230 volts, 50 hz ac, complete with blades, with anti suicide down rod, setof canopyand connecting up including three core pvc insulated multi stranded copper conductodirect current motor ( bldc ) complete all as specified and directed ( old retrieved fan shall be deposited in mes store .make usha / bajaj / havells. 124 s&f in replacement u / s and broken exhaust fan ( air freshener ) single phase 230 / 240 volt ac 250mm sweep with louvers, plastic body, with twisted copper flexible wire 23 / 0.0076mm including taking down old fan and deposited in mes store complete all as specified and directed.make: havells / bajaj / cg. 125 s&fin replacement u / s and broken exhaust fan ( air freshener ) single phase 230 / 240 volt ac 300mm sweep with louvers, plastic bodywith twisted copper flexible wire 23 / 0.0076mm including taking down old fan and deposited in mes store complete all as specified and directed.make: havells / bajaj / cg. 126 s&fin replacment u / s and broken exhaust fan single phase 230 / 240 volt ac 450mm sweep, with painted louvers, metal body, with twisted copper flexible wire 23 / 0.0076mm including taking down old fan and deposited in mes store complete all as specified and directed. make: havells / bajaj / cg. 127 supply, laying in repairs and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size25 sqmm 4 core, complete all as specified and directed at site. 128 supply, laying and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size16 sqmm 4 core, complete all as specified and directed at site. 129 excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft / loose soil complete all as specified and directed. 130 returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft / loose soil, complete all as specified and directed at site. 131 removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed at site. 132 material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed. 133 supply and laying in trenches dry well burnt locally available sub class “b” bricks over sand cushioning for protection of cable complete all as per specified and directed. 134 material & labour for pcc 1:3:6 type c2 using 40mm graded stone aggregate as in foundation, filling and mass concrete of poles / stay assembly / panels etc, complete all as specified and directed at site. 135 material & labour for pcc 1:2:4 type b1 using 20mm graded crushed stone aggregate as in form work / coping of poles, complete all as specified and directed at site. 136 material and labour for 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, incl taking out old pipe complete all as specified and directed including clamps, nut bolt and washers. 137 s&f in replacement unsv wall mounted fan single phase 230 / 240 volt ac 400mm sweep, with regulator, oscillation type complete fixed properly on wall and connecting / testingas directed. note old unsv fan will be deposited to e / m store yard make: havells / bajaj / cg. 138 m&l earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit ) not less than 2.25 metres deep below gl with top edge of earth plate ot less athn 1.50 m below ground levelsurrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to gi lead wire of 4 mm dia. ( 7.50 m long ) by means of nuts, bolts and washers, checknuts of giand protected by the gi pipe light grade 15 mm nominal bore ( 7.5 m long ) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick g i sheet funnel , wiremesh, earthing test pointetc complete including necessary earth work and excavation in any type of soil , pcc 1:2:4 type b1 earth pit and precast rcc cover 65 mm thick duly reinforced with 6 mm dia. ms round bars @ 100mm c / c both ways, with 10mm dia ms round bar as in lifting handles, excavation, earth work including laying the gi pipe concealed in floor / wall all as describedin electric plate of si part i completeall as specified and directed and testing on completion. note : ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department, complete all as specified and directed at site....

Uttar Pradesh Jal Nigam - Uttar Pradesh

39238889 invitation of itemwise rate for construction of school building at various place gorakhpur u p excavation of foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. 2 filling of carted earth. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 4 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 5 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 6 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200. ( a ) ground floor 7 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) ( a ) ground floor 8 as in item 6 but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) ( a ) ground floor 9 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 10 as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. ( a ) ground floor 11 first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc reqiored for proper completion of the work. 12 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( a ) ground floor 13 same as in item no. 14 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. ( a ) ground floor 14 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. ( a ) ground floor 15 providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.using flats 30x6mm for diagonal braces and central cross piece ( a ) single leaf 16 ( b ) extra for double leaf doors 17 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. ( a ) providing & fixing of hold fasts. 18 ( b ) providing & fixing of door / windows grill. 19 c ) fabrication of z section steel windows. ( openable ) 20 ( d ) angle ironchaukhats 21 fixingofsteelorwoodenchaukhats in position. ( a ) door chaukhats 22 ( b ) window chaukhats 23 ( c ) ventilator chaukhats 24 15 mm plinth plaster ( 1 cement :4 coarse sand ) 25 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 coarse sand. ( a ) ground floor 26 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 coarse sand ( a ) ground floor 27 making grooves 10 to 12 x 12mm and upto 25 x 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required. 28 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 29 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 30 cement plaster skirting up to 30 cm height, with cement mortar 1:3 ( 1 cement : 3 coarse sand ) , finished with a floating coat of neat cement.18 mm thick 31 finishingwallswith water proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem quality andof required shade on undecorated wall surfaces ( two coat ) overone andincludingonecoatwhite cement primertogivean even shade after thoroughly brushing the surface to powdered materialsincluding curing and cost of allmaterials. 32 distempering ( two coat ) withoil bounddistemper of approvedbrand andmanufacture&ofrequired shadeon undecorated wall surface to give an evenshade over &includingapriming coat with cement primer of approvedbrand&manufacture such as berger, j&n, shalimarasian paintsafterthoroughly brushingthe surface free from mortar droppings &other foreign matters& alsoincludingpreparing the surfaceeven with plasterof paris or approvedsynthetic material &sand papered smooth including cost of all materials. ( a ) applying putty base 33 painting ist coat over priming coat ( butexcluding cost of priming coat ) on steelandothermetalsurfacesup to 10 cm.widthorgirthorsmall articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as luxol3, hi glossapcolitesuperlac, dulux specifiedbrushingtogiveanevenshadeandincluding cleaningthe surfaceofalldirt, dust and other foreignmatter sandpaperingand stopingincluding cost ofall materials, labour toolsandplantsetc. required forpropercompletion ofthe work. 34 same as item 31 abovebutonnew wood surface. 35 providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compoundconsisting of applying:a ) after surface preparation, first layer of slurry of cement @0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. ( b ) laying second layer of fibre glass cloth when the first layer is still green. overlaps of joints of fibre cloth should not be less than 10 cm. ( c ) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg / sqm mixed with water proofing cement compound @ 0.670 kg / sqm and coarse sand @ 1.289 kg / sqm. this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. ( d ) fourth and final layer of brick tiling with cement mortar ( which will be paid for separately.for the purpose of measurement the entire treated surface will bemeasured. 36 providing and fixing isi marked oxidised m.s. sliding door bolts withnuts and screws etc. complete : ( copper oxidized as per is: 1378 ) ( a ) 300mm x 16mm. 37 providing and fixing isi marked oxidised m.s. tower bolt black finish, ( barrel type ) with necessary screws etc. complete : ( copper oxidized as per is: 1378 ) ( a ) 250 mm x 10mm 38 providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : ( copper oxidized as peris: 1378 ) 125 mm 39 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 40 wiring point for light with 1.5 sq.mm fr p.v.c. insulated multistrandsingle core copper conductor cable in pvc conduit with 1.5 sq.mm. frlsh pvc insulated multistrand copper conductor cable as earthing wire drawn inside the conduitpartly concealedin wall&partlylaidin slab along with the reinforcement before concreting, complete with modular typeswitch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash 41 wiring point for fan / fresh air fan ( light duty exhaust fan ) with 1.5 sq.mm frlsh pvc insulated multistrandsingle core copper conductor cable in pvc conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting, complete with 1.5 sq.mm. frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduitwith modular typeswitch, g.p. box & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash. 42 wiring point for plug 1.5 sq.mm frlsh pvc insulated multistrandsingle core copper conductor cable in pvc conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting, complete with 1.5 sq.mm. frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduitwith modular typeswitch & socket etc, complete in all respect including matching colour wash. 43 supply & wiring of submains with two number4 sq.mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in 20mm dia heavy duty ( 2mm thick ) pvc conduit with 1 number 2.5 sq.mm. frlsh pvc insulated 1100 v grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. 44 supply and wiring of submain 2 number 10 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in25mm dia heavy duty ( 2mm thick ) pvc conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 6.0 sqmm frlsh pvc multistand copperearth contunity wire including colour wash etc. complete in all respects. 45 supply and fixing of led tube light with batten suitable for up to 1x22 watt led tube light fitting complete including tube on surface complete in all respect.cat aaa 46 supply of ceiling fan with motor of a.c. permanent insulation capacitor rating confirming bee 5 star rating and is:374 / 79 and also comply with is:1709 / 1984 with latest amendment. the rated volage 220 / 240 volts, 50 hz, 1 ph a.c.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. bee 5 star rated 1200mm sweep 47 supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. 48 supplying & laying of 25mmx3mm g.i. strip from earth electrode in ground as required complete in all respects. 49 supply & fixing of two number 8 swg g.i. wire for earthing purpose as required complete in all respects. 50 supply and fixing of 6 amp to 32 amp mcb ( 10ka ) c curve6 32 amps.cat. a 51 supply and fixing of 6amp to 32 amp dp mcb ( 10ka ) c curve ( a ) 32 amp. dp mcb ( 10ka ) c curve cat. a 52 supply and fixing of single pole mcb blanking platecat a 53 supply and fixing of power plug with 20a / 250 v flush type modular switch and 5 pin 20 a / 250 volt flush type universal modular socket switch on concealedm.s. box including supply of all material, labour t & p etc required for proper completion of work. 54 erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick g.i. down rod 19mm dia duly painted, complete in all respects. 55 supply & fixing hexagonal / round g.p. fan box of approved make made up of 1.0 mm thick isi marked g.p. sheet spot welded four to eight holes of 25.4mm for pipe entry of the box. holes should be semi shuttered type with 0.5mm g.p. sheet made upper & lower cover duly screwed fitted with 300mm round zink coated m.s. bar x 12mm & brand name should be embossed. fixing with wiring conduit laid in the r.c.c. roof before concreting alongwith supply of all material labour, t & p etc required for proper completion of the work. 56 supplyfixingofelectronic fan regulator ( modular ) 120 280 v. isimarked, on the existing switch board including making connetion, required material, labour t / p etc for proper completion of work to the satisfaction of engineer in charge of work. 57 supply and laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on m.s. clamps etc. of suitable size. or as directed by the engineer incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. ( a ) 10 sqmm 2 core 58 supply & fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per direction of engineer inchage. ( a ) 10 sqmm 2 core 59 supplying and fixing of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer incharge.10 sq.mm...

Indian Institute Of Technology - Uttar Pradesh

38861723 providing & fixing of plastering, painting, tiles flooring and false ceiling works at sophisticated lab a and b, prof. gopal tripathi auditorium and upvc windows with m.s. grill in laboratory of dr. debdip bhandariin department of chemical engineering & technology, iit ( bhu ) , varanasi. ; 2 dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area beyond 3 sq. metres ( 15.12.2 ) 3 providing and fixing factory made upvc white colour sliding glazed window upto 1.50 m in height dimension comprising of upvc multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to upvc profile ) , appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy ( white powder coated ) touch locks with hook, zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ) , g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer in charge. ( single / double glass panes, wire mesh and silicon sealant shall be paid separately ) note: for upvc frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with s.s friction hinges ( 350 x 19 x 1.9 ) made of ( big series ) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. ( area of window above 3.00 sqm upto 5.00 sqm ) . ( 9.147a.6 ) 4 providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.with 12 mm mild steel u beading ( 9.135.2 ) 5 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) ( 21.3.2 ) 6 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to steel windows by welding ( 9.48.1 ) 7 providing and fixing double scaffolding system ( cup lock type ) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. sqm 257.95 note: this item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. ( 14.72 ) 8 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work ( 13.99.1 ) 9 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. ( 15.56 ) 10 15 mm cement plaster on rough side of single or half brick wallof mix : 1:6 ( 1 cement: 6 coarse sand ) ( 13.5.2 ) 11 half brick masonry with common burnt clay f.p.s. ( non modular ) bricksof class designation 7.5 in superstructure above plinth level up to floorv level. cement mortar 1:4 ( 1 cement :4 coarse sand ) ( 6.13.2 ) 12 providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595mm of approved texture, design and patterns having nrc ( noise reduction coefficient ) of 0.50 ( minimum ) as per is 8225:1987, light reflectance of 85% ( minimum ) . non combustible as per bs:476 ( part 4 ) , fire performance as per bs:476 ( part 6 &7 ) , humidity resistance of 100%, thermal conductivity < 0.043 w / m k as per astm 518:1991, in true horizontal level suspended on interlocking metal t grid of hot dipped galvanised iron section of 0.33mm thick ( galvanized @ 120 grams per sqm including both sides ) comprising of main t runners of size 24x38 mm of length 3000 mm, cross t of size 24x32 mm of length 1200 mm and secondary intermediate cross t of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x25x2 mm. galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. with 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. ( 26.22.1 ) 13 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. ( 13.91 ) 14 providing and laying vitrified tiles in floor with different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is : 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made separately ) .size of tile 600x600 mm ( 11.49.2 ) 15 providing and laying vitrified tiles in different sizes ( thickness to be specified by the manufacturer ) , with water absorption less than 0.08% and conforming to is: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is: 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made separately ) .size of tile 600x600 mm ( 11.47.2 ) 16 providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 13.80 ) 17 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: new work ( two or more coats ) over and including water thinnable priming coat with cement primer ( 13.41.1 ) ...

Meerut Municipal Corporation - Uttar Pradesh

38686237 construction of material recovery facility center 5 t.p.d . capacity for s.w.m. at vahan dipo sarsvati lok part 02 in nagar nigaem area ward no 48 earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil ( loam clay or sand ) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i / c with in a lead of 50m. 2 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 4 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm. ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 5 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200.same as above but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 6 same as above but for theslab i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 7 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 8 as in item 6 abovebut incolumn withapproved stone ballast. ( using1:1.5:3mix concrete ) . 9 class m 150 brick work in 1:6 cement coarse sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 10 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 11 class 150 half brick work in 1:4 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 12 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 13 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand. 14 15mm cement plaster in single coat of rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm. in girth and finished even and smooth no. extra for mixing any additive. 1 cement : 6 fine sand 15 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 16 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 17 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm / m² 18 providing ridges or hips of width 60 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 19 providing and fixing 15 cm wide, 45 cm overall semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 20 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for steel surface. 21 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for wooden surface. 22 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 24 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.a angle iron door chaukhats 40*40*5 25 b z section with m.s. grill 26 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 27 ( b ) window chaukhats 28 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 29 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( a ) 30 mm thick including isi marked stainless steel butt hinges with necessary screws single leaf 30 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 31 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( a ) 250 mm x 10mm 32 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm 33 finishingwallswith water proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces ( two coat ) overone andincludingonecoatwhite after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. 34 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 75 mm diameter 35 add internal electrification works 36 add extra for 6 water taps in washing unit 37 fencing wall excavation for all types and sizes of foundations, trenches and drains of for any other purpose including disposal of excavated stuff up to 1.5m lift and lead up to 50m ( at least 5m away from the excavated area ) , including dressing and leaving of pits.in all types of soil. 38 providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:4:8 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size ) 39 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 40 providing and fixing in position chain linked steel wire fabric made of 4mm dia g.i wire of required width in mesh to concrete / wooden / angle iron posts including securing and screwing with 2mm dia g.i wire, g.i staples, g.i.u nails or steel pins etc. complete aperture 50×50mm 41 providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10mm dia. as per requirement including priming coat with red oxide zinc chromate primer and placing the post / strut in cement concrete block. 42 providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works 1:2:4 ( 1 cement:2 coarse sand 4graded stone aggregate 20mm nominal size ) 43 12mm thick cement plaster of mix:in cement mortar 1:6 ( 1 cement :6 fine sand ) 44 12mm thick cement plaster of mix: in cement mortar 1:6 ( 1 cement:6 fine sand ) 45 finishing walls with water proofing cement paint of required shade to give an even shade.on new work ( two or more coats applied@3.84kg / 10sqm ) 46 inter locking tile excavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches.brick work for side alignment 47 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 48 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 49 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 50 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 60mm thick cement concrete paver block of m 35 grade with approved colour, design & pattern. 51 submersibileexternal w / s arrangement, t.w. boring of 150mm dia with 100mm dia p.v.c. pipe assembly, 1.5 h.p. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc.100mm dia pvc pipe of isi mark [ 14 kg pressure ] 52 p / f 2 pvc pipe 53 nylon mesh for filter 54 plastic dori 55 solvent dori 56 4 end cap 57 4 submersible cap 58 2 ms clamp ( heavy ) 59 2 gl elbow. 60 2*6 gi nipple 61 1.5 hp 9 stage submersible pump of isi mark with automatic panel. 62 2.5 sqm. submersible cable. 63 drilling charges for 6 dia tubewell. 64 pea gravel 65 2 ms socket. 66 cartage of material upto site. 67 toiletexcavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. 68 providing and laying cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 69 providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. 70 r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra. 71 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) 72 m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 73 providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 74 providing & applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 75 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 76 same as in item no. 9 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 77 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 78 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m. 79 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 80 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. 81 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cement and matching pigment etc., complete.. 82 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 83 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 84 providing and fixing of flush doors commercial quality conforming to i.s. 2202 part i ( 1983 ) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles spring fitting with necessary screws to be supplied departmentally. 30 mm thick ( a ) single leaf 85 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. a providing & fixing of hold fast for chaukhatsof doors and windows. 86 providing & fixing of door / windows grill. 87 z section steel windows ( openable ) 88 angle iron door chaukhats 40*40*5 89 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 90 ( b ) window chaukhats 91 ( c ) ventilator chaukhats 92 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 93 finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour and t & p etc. required for proper completion the work. two coat 94 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 95 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 96 providing and fixing stainless steel handles with screws etc. complete ( a ) 125 mm 97 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: 98 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 99 same as item 27 above but on new wood surface. 100 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 101 providing and fixing water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 102 providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required:range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 103 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade 104 cp brass fittings providing and fixing unplasticised pvc connection pipe with brass unions 15 mm nominal bore 105 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore 106 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) 110 mm dia 107 90 mm dia 108 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm 109 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion.110 mm bend 110 110 mm shoe 111 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 112 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. 113 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge.concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 114 25mm dia nominal outer dia pipes 115 providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . 20mm dianominal bore 116 painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. 20mm dia nominal bore 117 providing and fixing gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) .15mm dia nominal bore 118 20mm dia nominal bore 119 providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore 120 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 121 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 122 providing, laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete. 100mm diameter 123 providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe 124 providing and fixing square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard designwith sewer bricks conforming to is : 4885 125 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming to is : 13592 type b including jointing with seal ring conforming to is: 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes.a ) 110mm dia p.v.c. pipe 126 b ) 90mm dia p.v.c. pipe 127 providing & fixing upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 110mm 128 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.110mm bend 129 90 mm bend 130 110mm 131 90mm 132 single tee with door 90x90x90 mm 133 providing and fixing pvcinlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia pvc pipes ( approx. length=150mm to 300mm ) and fixed to pvc trap with joint and set in cement concrete as per standard drawingcomplete. 134 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8m long complete as per standard design. with f.p.s. bricks 135 wiring points for light with 1 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 136 supply & fixing of fancy type round ceiling fitting made of polycarbonate suitable for and with 1x15 / 18 watt cfl complete in all respect. 137 supply & fixing of industrial bulk head fitting with polycarbonate base guard, prismatic reflector silicon gasket suitable for and with 1 x 18 watt cfl complete in all respect 138 m:s gatemild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 139 painting one coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 140 c:c roadexcavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches. 141 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 142 construction of granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material byippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as perpecifications and directions of engineerin charge with material conforming to grade ii ( size range 53 mm to 0.075 mm ) having cbr value 25 143 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 144 excavating, supplying and filling of local earth ( including royalty ) by mechanical transport up to a lead of 12km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc all complete as the direction of engineer in charge. 145 add extra for outer electrification...

Meerut Municipal Corporation - Uttar Pradesh

38686236 construction of material recovery facility center 5 t.p.d . capacity for s.w.m. at baral partapur part 01 in nagar nigaem area ward no 10 earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil ( loam clay or sand ) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i / c with in a lead of 50m. 2 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 4 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm. ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 5 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200.same as above but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 6 same as above but for theslab i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 7 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 8 as in item 6 abovebut incolumn withapproved stone ballast. ( using1:1.5:3mix concrete ) . 9 class m 150 brick work in 1:6 cement coarse sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 10 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 11 class 150 half brick work in 1:4 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 12 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 13 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand. 14 15mm cement plaster in single coat of rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm. in girth and finished even and smooth no. extra for mixing any additive. 1 cement : 6 fine sand 15 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 16 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 17 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm / m² 18 providing ridges or hips of width 60 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 19 providing and fixing 15 cm wide, 45 cm overall semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 20 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for steel surface. 21 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for wooden surface. 22 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 24 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.a angle iron door chaukhats 40*40*5 25 b z section with m.s. grill 26 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 27 ( b ) window chaukhats 28 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 29 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( a ) 30 mm thick including isi marked stainless steel butt hinges with necessary screws single leaf 30 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 31 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( a ) 250 mm x 10mm 32 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm 33 finishingwallswith water proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces ( two coat ) overone andincludingonecoatwhite after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. 34 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 75 mm diameter 35 add internal electrification works 36 add extra for 6 water taps in washing unit 37 fencing wall excavation for all types and sizes of foundations, trenches and drains of for any other purpose including disposal of excavated stuff up to 1.5m lift and lead up to 50m ( at least 5m away from the excavated area ) , including dressing and leaving of pits.in all types of soil. 38 providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:4:8 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size ) 39 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 40 providing and fixing in position chain linked steel wire fabric made of 4mm dia g.i wire of required width in mesh to concrete / wooden / angle iron posts including securing and screwing with 2mm dia g.i wire, g.i staples, g.i.u nails or steel pins etc. complete aperture 50×50mm 41 providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10mm dia. as per requirement including priming coat with red oxide zinc chromate primer and placing the post / strut in cement concrete block. 42 providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works 1:2:4 ( 1 cement:2 coarse sand 4graded stone aggregate 20mm nominal size ) 43 12mm thick cement plaster of mix:in cement mortar 1:6 ( 1 cement :6 fine sand ) 44 12mm thick cement plaster of mix: in cement mortar 1:6 ( 1 cement:6 fine sand ) 45 finishing walls with water proofing cement paint of required shade to give an even shade.on new work ( two or more coats applied@3.84kg / 10sqm ) 46 inter locking tile excavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches.brick work for side alignment 47 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 48 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 49 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 50 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 60mm thick cement concrete paver block of m 35 grade with approved colour, design & pattern. 51 submersibileexternal w / s arrangement, t.w. boring of 150mm dia with 100mm dia p.v.c. pipe assembly, 1.5 h.p. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc.100mm dia pvc pipe of isi mark [ 14 kg pressure ] 52 p / f 2 pvc pipe 53 nylon mesh for filter 54 plastic dori 55 solvent dori 56 4 end cap 57 4 submersible cap 58 2 ms clamp ( heavy ) 59 2 gl elbow. 60 2*6 gi nipple 61 1.5 hp 9 stage submersible pump of isi mark with automatic panel. 62 2.5 sqm. submersible cable. 63 drilling charges for 6 dia tubewell. 64 pea gravel 65 2 ms socket. 66 cartage of material upto site. 67 toiletexcavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. 68 providing and laying cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 69 providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. 70 r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra. 71 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) 72 m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 73 providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 74 providing & applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 75 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 76 same as in item no. 9 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 77 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 78 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m. 79 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 80 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. 81 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cement and matching pigment etc., complete.. 82 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 83 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 84 providing and fixing of flush doors commercial quality conforming to i.s. 2202 part i ( 1983 ) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles spring fitting with necessary screws to be supplied departmentally. 30 mm thick ( a ) single leaf 85 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. a providing & fixing of hold fast for chaukhatsof doors and windows. 86 providing & fixing of door / windows grill. 87 z section steel windows ( openable ) 88 angle iron door chaukhats 40*40*5 89 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 90 ( b ) window chaukhats 91 ( c ) ventilator chaukhats 92 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 93 finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour and t & p etc. required for proper completion the work. two coat 94 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 95 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 96 providing and fixing stainless steel handles with screws etc. complete ( a ) 125 mm 97 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: 98 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 99 same as item 27 above but on new wood surface. 100 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 101 providing and fixing water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 102 providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required:range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 103 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade 104 cp brass fittings providing and fixing unplasticised pvc connection pipe with brass unions 15 mm nominal bore 105 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore 106 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) 110 mm dia 107 90 mm dia 108 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm 109 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion.110 mm bend 110 110 mm shoe 111 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 112 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. 113 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge.concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 114 25mm dia nominal outer dia pipes 115 providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . 20mm dianominal bore 116 painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. 20mm dia nominal bore 117 providing and fixing gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) .15mm dia nominal bore 118 20mm dia nominal bore 119 providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore 120 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 121 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 122 providing, laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete. 100mm diameter 123 providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe 124 providing and fixing square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard designwith sewer bricks conforming to is : 4885 125 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming to is : 13592 type b including jointing with seal ring conforming to is: 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes.a ) 110mm dia p.v.c. pipe 126 b ) 90mm dia p.v.c. pipe 127 providing & fixing upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 110mm 128 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.110mm bend 129 90 mm bend 130 110mm 131 90mm 132 single tee with door 90x90x90 mm 133 providing and fixing pvcinlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia pvc pipes ( approx. length=150mm to 300mm ) and fixed to pvc trap with joint and set in cement concrete as per standard drawingcomplete. 134 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8m long complete as per standard design. with f.p.s. bricks 135 wiring points for light with 1 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 136 supply & fixing of fancy type round ceiling fitting made of polycarbonate suitable for and with 1x15 / 18 watt cfl complete in all respect. 137 supply & fixing of industrial bulk head fitting with polycarbonate base guard, prismatic reflector silicon gasket suitable for and with 1 x 18 watt cfl complete in all respect 138 m:s gatemild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 139 painting one coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 140 c:c roadexcavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches. 141 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 142 construction of granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material byippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as perpecifications and directions of engineerin charge with material conforming to grade ii ( size range 53 mm to 0.075 mm ) having cbr value 25 143 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 144 excavating, supplying and filling of local earth ( including royalty ) by mechanical transport up to a lead of 12km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc all complete as the direction of engineer in charge. 145 add extra for outer electrification...

Meerut Municipal Corporation - Uttar Pradesh

38686235 construction of material recovery facility center 5 t.p.d . capacity for s.w.m. at bhola road radha kunj khasra no 783 part 02 in nagar nigaem area ward no 15 earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil ( loam clay or sand ) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i / c with in a lead of 50m. 2 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 4 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm. ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 5 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200.same as above but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 6 same as above but for theslab i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 7 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 8 as in item 6 abovebut incolumn withapproved stone ballast. ( using1:1.5:3mix concrete ) . 9 class m 150 brick work in 1:6 cement coarse sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 10 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 11 class 150 half brick work in 1:4 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 12 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 13 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand. 14 15mm cement plaster in single coat of rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm. in girth and finished even and smooth no. extra for mixing any additive. 1 cement : 6 fine sand 15 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 16 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 17 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm / m² 18 providing ridges or hips of width 60 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 19 providing and fixing 15 cm wide, 45 cm overall semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 20 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for steel surface. 21 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for wooden surface. 22 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 24 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.a angle iron door chaukhats 40*40*5 25 b z section with m.s. grill 26 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 27 ( b ) window chaukhats 28 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 29 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( a ) 30 mm thick including isi marked stainless steel butt hinges with necessary screws single leaf 30 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 31 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( a ) 250 mm x 10mm 32 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm 33 finishingwallswith water proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces ( two coat ) overone andincludingonecoatwhite after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. 34 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 75 mm diameter 35 add internal electrification works 36 add extra for 6 water taps in washing unit 37 fencing wall excavation for all types and sizes of foundations, trenches and drains of for any other purpose including disposal of excavated stuff up to 1.5m lift and lead up to 50m ( at least 5m away from the excavated area ) , including dressing and leaving of pits.in all types of soil. 38 providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:4:8 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size ) 39 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 40 providing and fixing in position chain linked steel wire fabric made of 4mm dia g.i wire of required width in mesh to concrete / wooden / angle iron posts including securing and screwing with 2mm dia g.i wire, g.i staples, g.i.u nails or steel pins etc. complete aperture 50×50mm 41 providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10mm dia. as per requirement including priming coat with red oxide zinc chromate primer and placing the post / strut in cement concrete block. 42 providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works 1:2:4 ( 1 cement:2 coarse sand 4graded stone aggregate 20mm nominal size ) 43 12mm thick cement plaster of mix:in cement mortar 1:6 ( 1 cement :6 fine sand ) 44 12mm thick cement plaster of mix: in cement mortar 1:6 ( 1 cement:6 fine sand ) 45 finishing walls with water proofing cement paint of required shade to give an even shade.on new work ( two or more coats applied@3.84kg / 10sqm ) 46 inter locking tile excavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches.brick work for side alignment 47 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 48 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 49 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 50 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 60mm thick cement concrete paver block of m 35 grade with approved colour, design & pattern. 51 submersibileexternal w / s arrangement, t.w. boring of 150mm dia with 100mm dia p.v.c. pipe assembly, 1.5 h.p. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc.100mm dia pvc pipe of isi mark [ 14 kg pressure ] 52 p / f 2 pvc pipe 53 nylon mesh for filter 54 plastic dori 55 solvent dori 56 4 end cap 57 4 submersible cap 58 2 ms clamp ( heavy ) 59 2 gl elbow. 60 2*6 gi nipple 61 1.5 hp 9 stage submersible pump of isi mark with automatic panel. 62 2.5 sqm. submersible cable. 63 drilling charges for 6 dia tubewell. 64 pea gravel 65 2 ms socket. 66 cartage of material upto site. 67 toiletexcavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. 68 providing and laying cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 69 providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. 70 r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra. 71 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) 72 m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 73 providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 74 providing & applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 75 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 76 same as in item no. 9 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 77 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 78 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m. 79 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 80 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. 81 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cement and matching pigment etc., complete.. 82 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 83 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 84 providing and fixing of flush doors commercial quality conforming to i.s. 2202 part i ( 1983 ) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles spring fitting with necessary screws to be supplied departmentally. 30 mm thick ( a ) single leaf 85 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. a providing & fixing of hold fast for chaukhatsof doors and windows. 86 providing & fixing of door / windows grill. 87 z section steel windows ( openable ) 88 angle iron door chaukhats 40*40*5 89 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 90 ( b ) window chaukhats 91 ( c ) ventilator chaukhats 92 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 93 finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour and t & p etc. required for proper completion the work. two coat 94 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 95 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 96 providing and fixing stainless steel handles with screws etc. complete ( a ) 125 mm 97 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: 98 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 99 same as item 27 above but on new wood surface. 100 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 101 providing and fixing water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 102 providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required:range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 103 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade 104 cp brass fittings providing and fixing unplasticised pvc connection pipe with brass unions 15 mm nominal bore 105 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore 106 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) 110 mm dia 107 90 mm dia 108 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm 109 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion.110 mm bend 110 110 mm shoe 111 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 112 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. 113 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge.concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 114 25mm dia nominal outer dia pipes 115 providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . 20mm dianominal bore 116 painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. 20mm dia nominal bore 117 providing and fixing gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) .15mm dia nominal bore 118 20mm dia nominal bore 119 providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore 120 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 121 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 122 providing, laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete. 100mm diameter 123 providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe 124 providing and fixing square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard designwith sewer bricks conforming to is : 4885 125 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming to is : 13592 type b including jointing with seal ring conforming to is: 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes.a ) 110mm dia p.v.c. pipe 126 b ) 90mm dia p.v.c. pipe 127 providing & fixing upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 110mm 128 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.110mm bend 129 90 mm bend 130 110mm 131 90mm 132 single tee with door 90x90x90 mm 133 providing and fixing pvcinlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia pvc pipes ( approx. length=150mm to 300mm ) and fixed to pvc trap with joint and set in cement concrete as per standard drawingcomplete. 134 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8m long complete as per standard design. with f.p.s. bricks 135 wiring points for light with 1 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 136 supply & fixing of fancy type round ceiling fitting made of polycarbonate suitable for and with 1x15 / 18 watt cfl complete in all respect. 137 supply & fixing of industrial bulk head fitting with polycarbonate base guard, prismatic reflector silicon gasket suitable for and with 1 x 18 watt cfl complete in all respect 138 m:s gatemild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 139 painting one coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 140 c:c roadexcavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches. 141 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 142 construction of granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material byippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as perpecifications and directions of engineerin charge with material conforming to grade ii ( size range 53 mm to 0.075 mm ) having cbr value 25 143 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 144 excavating, supplying and filling of local earth ( including royalty ) by mechanical transport up to a lead of 12km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc all complete as the direction of engineer in charge. 145 add extra for outer electrification...

Meerut Municipal Corporation - Uttar Pradesh

38686231 construction of material recovery facility center 5 t.p.d . capacity for s.w.m. at khadoli deep vihar khasra no 216 part 01 in nagar nigaem area ward no 38 earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil ( loam clay or sand ) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i / c with in a lead of 50m. 2 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 4 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm. ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 5 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200.same as above but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 6 same as above but for theslab i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 7 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 8 as in item 6 abovebut incolumn withapproved stone ballast. ( using1:1.5:3mix concrete ) . 9 class m 150 brick work in 1:6 cement coarse sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 10 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 11 class 150 half brick work in 1:4 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 12 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 13 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand. 14 15mm cement plaster in single coat of rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm. in girth and finished even and smooth no. extra for mixing any additive. 1 cement : 6 fine sand 15 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 16 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 17 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm / m² 18 providing ridges or hips of width 60 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts 8 mm dia g.i. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 19 providing and fixing 15 cm wide, 45 cm overall semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm / m² 20 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for steel surface. 21 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for wooden surface. 22 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 24 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.a angle iron door chaukhats 40*40*5 25 b z section with m.s. grill 26 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 27 ( b ) window chaukhats 28 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 29 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( a ) 30 mm thick including isi marked stainless steel butt hinges with necessary screws single leaf 30 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 31 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( a ) 250 mm x 10mm 32 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm 33 finishingwallswith water proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces ( two coat ) overone andincludingonecoatwhite after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. 34 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 75 mm diameter 35 add internal electrification works 36 add extra for 6 water taps in washing unit 37 fencing wall excavation for all types and sizes of foundations, trenches and drains of for any other purpose including disposal of excavated stuff up to 1.5m lift and lead up to 50m ( at least 5m away from the excavated area ) , including dressing and leaving of pits.in all types of soil. 38 providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:4:8 ( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size ) 39 class 150 brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 40 providing and fixing in position chain linked steel wire fabric made of 4mm dia g.i wire of required width in mesh to concrete / wooden / angle iron posts including securing and screwing with 2mm dia g.i wire, g.i staples, g.i.u nails or steel pins etc. complete aperture 50×50mm 41 providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10mm dia. as per requirement including priming coat with red oxide zinc chromate primer and placing the post / strut in cement concrete block. 42 providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works 1:2:4 ( 1 cement:2 coarse sand 4graded stone aggregate 20mm nominal size ) 43 12mm thick cement plaster of mix:in cement mortar 1:6 ( 1 cement :6 fine sand ) 44 12mm thick cement plaster of mix: in cement mortar 1:6 ( 1 cement:6 fine sand ) 45 finishing walls with water proofing cement paint of required shade to give an even shade.on new work ( two or more coats applied@3.84kg / 10sqm ) 46 inter locking tile excavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches.brick work for side alignment 47 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 48 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 49 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. 50 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 60mm thick cement concrete paver block of m 35 grade with approved colour, design & pattern. 51 submersibileexternal w / s arrangement, t.w. boring of 150mm dia with 100mm dia p.v.c. pipe assembly, 1.5 h.p. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc.100mm dia pvc pipe of isi mark [ 14 kg pressure ] 52 p / f 2 pvc pipe 53 nylon mesh for filter 54 plastic dori 55 solvent dori 56 4 end cap 57 4 submersible cap 58 2 ms clamp ( heavy ) 59 2 gl elbow. 60 2*6 gi nipple 61 1.5 hp 9 stage submersible pump of isi mark with automatic panel. 62 2.5 sqm. submersible cable. 63 drilling charges for 6 dia tubewell. 64 pea gravel 65 2 ms socket. 66 cartage of material upto site. 67 toiletexcavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer incharge up to a distance of 30 meters from the foundation trenches. 68 providing and laying cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) including supply of all materials, labour t & p rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 69 providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. 70 r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra. 71 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) 72 m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 73 providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 74 providing & applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 75 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 76 same as in item no. 9 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 77 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 78 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m. 79 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 80 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. 81 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cement and matching pigment etc., complete.. 82 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 83 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 84 providing and fixing of flush doors commercial quality conforming to i.s. 2202 part i ( 1983 ) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles spring fitting with necessary screws to be supplied departmentally. 30 mm thick ( a ) single leaf 85 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. a providing & fixing of hold fast for chaukhatsof doors and windows. 86 providing & fixing of door / windows grill. 87 z section steel windows ( openable ) 88 angle iron door chaukhats 40*40*5 89 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 90 ( b ) window chaukhats 91 ( c ) ventilator chaukhats 92 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 93 finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour and t & p etc. required for proper completion the work. two coat 94 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 95 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 96 providing and fixing stainless steel handles with screws etc. complete ( a ) 125 mm 97 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: 98 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 99 same as item 27 above but on new wood surface. 100 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 101 providing and fixing water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 102 providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required:range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 103 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade 104 cp brass fittings providing and fixing unplasticised pvc connection pipe with brass unions 15 mm nominal bore 105 providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore 106 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) 110 mm dia 107 90 mm dia 108 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm 109 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion.110 mm bend 110 110 mm shoe 111 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 112 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. 113 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge.concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 114 25mm dia nominal outer dia pipes 115 providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . 20mm dianominal bore 116 painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. 20mm dia nominal bore 117 providing and fixing gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) .15mm dia nominal bore 118 20mm dia nominal bore 119 providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore 120 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 121 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 122 providing, laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete. 100mm diameter 123 providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe 124 providing and fixing square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard designwith sewer bricks conforming to is : 4885 125 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming to is : 13592 type b including jointing with seal ring conforming to is: 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes.a ) 110mm dia p.v.c. pipe 126 b ) 90mm dia p.v.c. pipe 127 providing & fixing upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 110mm 128 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.110mm bend 129 90 mm bend 130 110mm 131 90mm 132 single tee with door 90x90x90 mm 133 providing and fixing pvcinlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia pvc pipes ( approx. length=150mm to 300mm ) and fixed to pvc trap with joint and set in cement concrete as per standard drawingcomplete. 134 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8m long complete as per standard design. with f.p.s. bricks 135 wiring points for light with 1 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 136 supply & fixing of fancy type round ceiling fitting made of polycarbonate suitable for and with 1x15 / 18 watt cfl complete in all respect. 137 supply & fixing of industrial bulk head fitting with polycarbonate base guard, prismatic reflector silicon gasket suitable for and with 1 x 18 watt cfl complete in all respect 138 m:s gatemild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 139 painting one coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 140 c:c roadexcavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches. 141 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 142 construction of granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material byippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as perpecifications and directions of engineerin charge with material conforming to grade ii ( size range 53 mm to 0.075 mm ) having cbr value 25 143 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 144 excavating, supplying and filling of local earth ( including royalty ) by mechanical transport up to a lead of 12km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc all complete as the direction of engineer in charge. 145 add extra for outer electrification...

Nagar Palika Parishad - Uttar Pradesh

38606034 tender for jcb vehicle tire tube front and rear. installation of 02 nos. ac 2 ton in office auditorium. purchase of 01 big and 20 chairs in the presidents office. stabilizer with installation of 1 ton ac in executive officers room. for publicity and awareness under swachh bharat mission (urban) scheme dslr camera shopping. supply tree guard 4x2 fit (35 nos.) wall painting work of 2000 square feet at various places in the north side of the city. wall painting work of 2000 square feet at various places in the south side of the city. 01 chair for the chairman in the auditorium and 07 for the executive officers room purchase of chair and other chairs. r.b.d. machine heavy duty petrol operated auger, earth auger 02 nos. sanitary fitting and painting work on municipal night shelter. r on the open drain in pulia wali masjid wali gali. c. c. deps work and s. s. s. of. v. drain repair work near binods house in balmiki basti behind school, balmiki behind ingenium sahabs kothi 3 balmiki basti repair work of drain near raza auto parts house. construction of musif court wall. earth filling work in the palika khalihan located on the highway. earth filling work in shri charandas temple. work of seat, urinal and wash basin in toilet in municipality office. self. pothole free road work in front of nihal uddin advocate. work of steel windows and ventilators in municipality office. construction of culvert for drain water in mohalla para jatwan in front of uttam general store. repair work etc. in the public toilet built in the block. construction of iron jaali in nalah at different place in town. the work of repairing tiles and etc. in the public toilet built near the municipality office. iron dip work on astal pulia. old bank of baroda and mukesh saxena shopkeeper, idris clothes shop, work of dip near kassawan masjid and repair of dip of urman yadav street in shantinagar. repair work of public toilet located at nagariya road turn etc. iron dip repair and cc ramp work near dr. shyam bihari lal, near member azim miyan, near mahendra kashyaps shop mo. well wall and c.c. near janseva hospital in buxaria. floors, work of steel gate and paint and mesh etc. construction of interlocking bricks road in mohalla road, mohalla para jatwan from pulia to mathia ward no. 01 para jatwan construction of tan singhs house in interlocking bricks road mohalla para jatwan from to omi sagars house, ward no. 01 para jatwan construction drain and iron trap in front of naseem bhais house till mujib bhais house, ward no. 08 computer system 02 nos complete office curtains dip repair work at various places in the city municipalitys jalkal sansthan pump no. camera installation work on 1...

Military Engineer Services - Uttar Pradesh

38569037 provn of 01 x toilet block in old vtc at the sikh li regt centre, fatehgarh cantt. 1 m&l for surface dressing n.exc 15 cm deep in soft / loose soil complete all as specified and directed. 2 excavating in trenches in soft / loose soiln.exc. 1.5m wide and n.exc. 1.5 m depth for foundation , laying of under ground cable etc & complete all as specified and directed. 3 m&l cement concrete 1:4:8type d2 ( 40 mm graded aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. 4 m & l brick work with sub class b bricks, straight or curved on plan exc 6m mean radius built in cm ( 1:6 ) complete all as specified and directed. 5 m&l half brick thick walls built in cm 1:4 sub class b bricks straight or curved on plan to any radius complete all as specified and directed. 6 m & l rcc type b1 1:2:4 ( using 20 mm graded stone aggt ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete etc complete all as specified and directed. 7 m&l for reinforced cement concrete ( nominal mix ) type b1 1:2:4 ( 20 mm graded aggregate ) in beams, cantilevers, bressumers, lintels bandcomplete all as specified and directed. 8 m&l for rcc 1:2:4 type b 1 using 20mm graded aggregate slab supported on walls , columns in floors, roofs landings, balconies canopies deck slab and in the shelves and the like, complete all as specified and directed. 9 m & l for form work as in sides of columns etc complete all as specified and directed. 10 m & l for form work as in roof beams, sides of suspended slabs etc complete all as specified and directed. 11 use and waste of form work to soffits of of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200cm thick ( horizontal or sloping ) complete all as specified and directed. 12 m & l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or to batteretc complete all as specified and directed. 13 s&f mild steel tmt bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for coloumn , hooking ends and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clip complete all as specified and directed 14 ditto as item no 10 here in before but but 6mm to 8mm diacomplete all as specified and directed . 15 s&f mild steel tmt bars 05mm dia and over and including 10mm dia as in stirrups, cut to length bent to shape required including cranking bending spirally for hooping for coloumn , hooking ends and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clip complete all as specified and directed. 16 m & l rendering 15mm thick in cm ( 1:6 ) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed. 17 m & l rendering 15mm thick in cm ( 1:6 ) on fair faces of brick work or concrete surfaces to be finished rough complete all as specified and directed. 18 m & l rendering 15mm thick in cm ( 1:4 ) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed. 19 m & l rendering 5mm thick in cm ( 1:3 ) on fair faces of ceilling concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed. 20 m & l non skid coloured ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement ( 1:6 ) complete all as specified and directed. 21 m&l for glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. 22 m&l for spreading, levelling and well ramming to excavated soil including watering as required in layers n exc. 25 cm thick complete all as specified and directed.note :soil shall be used in work obatin from excavation of soil. 23 m&l broken bricks hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rolled / rammed to a true surfaces complete all as specified and directed. 24 m&l cement concrete type d 2 , 1:4:8 ( 40 mm graded aggregate ) 100 mm thick in sub floor complete all as specified and directed. 25 m & l for preparation of new plastered surfaces of walls and applying two coats of obd over a coat of chalk whitening complete all as specified and directed. 26 m & l for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. 27 m & l for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete. 28 s&f 15mm bore chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 29 s&f 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood with aluminum beading on sides fixed to walls with screws complete all as specified and directed. 30 s&f vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm pvc waste pipe, 32 mm ptmt waste coupling and 15 mm dia pillar taps fancy type chromium plated complete all as specified and directed. 31 s&fvitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) including all fittings complete all as specified and as directed . 32 s&f vitreous china urinals flat back of size 465 x 355 x 265 mm, bowl type including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass srews and pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipeincluding fixing supply pipe to flushing cistern trap and waste pipecomplete all as specified and directed. 33 s&f15 mm bore , stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated with long shank and cup ( concealed type ) complete all as specified and directed. 34 s&f15 mm bore , stop valves angle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and directed. 35 s & fbrass chromium plated shower rose 125mm size with shower arm complete all as specified an directed by engineer in charge. 36 s&f pvc connection 15mm size with ptmt nuts of length 450mm etc complete all as specified and directed. 37 s&f steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. 38 s & f 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed. 39 s & f galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows / wodden doors complete all as specified and directed. 40 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm palin colour pvc sheet reinforced with ms square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed. 41 s&f factory made solid panel pvc door shutter 30mm thick ( style ) consisting of frame made out of ms tubes for top & bottom rails. m s frame shall be covered with heat moulded plain colour pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock and bottom rail on either side & as gap insert for top rail & bottorm rails; panelling of plain colour pvc sheet to be fitted in the ms frame weloded / seated to the stiles & rails with suitable pvc sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawingcomplete all as specified and directed. 42 s&f aluminium anodised butt hinges of size 100mm medium weightcomplete all as specified and directed. 43 s&f aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed. 44 s&f aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed. 45 s&f 300 mm long aluminium anodized, sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 46 s&f steel tubes medium grade bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed. 47 s&f steel tubes medium grade bore of tube in 20 mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed. 48 s&f 110 mm bore pvc ( swr ) pipes single soketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. 49 s&f 110 mm bore pvc ( swr ) bends fixed to wallcomplete all as specified and directed. 50 s&f 110mm pvc ( swr ) floor trap , plain with grating including jointing with solvent cementcomplete all as specified and directed. 51 s&f pvc ( swr ) gully trap 125 / 110 mm with grating andsetting with cement concrete and jointing with solvent cementcomplete all as specified and directed. 52 s&f rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed up, capacity in 1000 ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in ssr part i complete all as specified and directed. 53 m & l 75 mm thick pcc 1:3:6 type c 2 using 40mm graded aggregateds as in plinth protection, subbase of floors complete all as specified and directed. 54 returning filling including spreading, leveling, watering and well ramming in layers n.exc. 25cm for soft / loose soilcomplete all as specified and directed. 55 removing excavated materials ( soil ) not exc 0.50m and depositing where directed of a level not exc 1.5m above the starting pointcomplete all as specified and directed. 56 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and gettingout in soft / loose soilcomplete all as specified and directed. 57 excavating in trenches, n exc 1.5 m wide and exc 1.50m but n exc 3.00 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and exc 1.50 depth but n exc 3.0 m in depth and gettingout in soft / loose soil complete all as specified and directed. 58 m & l for cement concrete 1:2:4 type b 2 ( using 40mm graded stone aggregate ) as in benchingconcretecomplete all as specified and directed. 59 m&l for cement concrete ( 1:3:6 ) type c 2 using ( 40mm graded crushed stone aggregate ) as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia ( internal ) after these are laid in trenchescomplete all as specified and directed. 60 m & l brick work with sub class b brick, straight or curved on plan exc 6m mean radius built in cm ( 1:6 ) etccomplete all as specified and directed. 61 m & l 150mm dia ( internal ) salt glazed stoneware drain pipes laid in trenches and jointed complete with collars complete all as specified and directed. 62 m & l for providing precast cement concrete 1:2:4 type b 1 ( using 20mm grades stone aggregate ) asin landings, cover slabs ( for man holes etc. ) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar 1:4 complete with joints to match etc complete all as specified and directed 63 m & l for rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:3 ( internal surface ) with wpc as per manufacture instruction complete all as specified and directed.note: quoted rate shall include amount of wpc 64 m & l for rendering 05 mm thick on fair faces of brick work or concrete surfaces in cm 1:3 ( internal surface ) with wpc complete all as specified and directed. 65 m&l for cutting into exisiting manholes for 150mm bore pipe for connecting new drains, making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1 / 2 round or 3 / 4 section ) in cement concrete 1:2:4 type b1 smooth finished , and reforming benching as requiredcomplete all as specified and directed. 66 surface excavation n.exc ( not exceeding ) 30 cm deep and averaging 12 cm deep and getting out in soft / loose soilcomplete all as specified and directed. 67 m&l for 100mm thickhardcore of bricks of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed. 68 m& lfor plain cement concrete 1:3:6 type c 2, ( using 40mm graded aggregate ) as in sub basecomplete all as specified and directed. 69 m &l for non skid outdoor tiles of size 400 x 400 x 10mm thick jointed with cement with color pigment match with existing color laid over 15mm thick screed bed in cm 1:6 etc complete all as specified and directed. 70 m&l for plain cement concrete 1:2:4 type b 0 ( using 12.5mm graded stone aggregate ) as in copingcomplete all as specified and directed. 71 m&l for point wiring of one light / fan / bell / exhaust fan point controlled by one switch with 1100 volt grade pvc insulated unsheathed 1.5 sq mm ( frls ) multistranded copper conductor cable, with continuous earth wire of 1.5 sq mm ( frls ) multistrandedcopper conductor cable pvc insulated unsheathed, drawn in & including concealedpvc conduit medium grade with fittings ( isi marked ) not less than 20 mm dia & 1.6 mm thick sunken pressed steelgalvanised terminal boxes with top cover 2.80 mm thick isi marked plastic laminated hylam sheet of required colour for housing / fixingswitches etc complete all as specified and directed.note cost of cutting chases for concealed wiring and surfaces made good using cm ( 1:4 ) and surface finished to match the existing surface shall be included in quoted rate. 72 ditto as above but for one 15 amp 6pin switch socket out let point on an independent board with 2.5 sqmm frls unsheathed coupper conductur single coremultistrandedcopper conductor………ditto as above………. 73 s&f switch piano 5 ampflush type 240 volt single pole oneway complete all as specified and directed. 74 s&f switch socket combination 5 in 1 flush type 15 ampcomplete all as specified and directed. 75 s & f ceiling rose pvc / poly carbonate isolated body three terminal ac 230 volts complete all as specified and directed. 76 s & fmcb distribution board spn 240 volt 4 way with 200 amp rated bus bar having ip 43 protection and double metal door connealed in wall including connection with copper thimbles as reuired complete all as specified. 77 s & f mcb spn 16 40 amp 240 volt c curve complete all as specifed and directed. 78 s & f mcb sp 6 to 32 amp 240 volt ccurve 10 ka complete all as specifed and directed. 79 s&f led batten 4 ft surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 20w ( 4 ft 20 w ) , luminaire lumen >2000 lm, system efficiency of > 120 lumens / w, with led binning as per ansi bin c78.377a, photo biological safety report as per iec624718 & electrical insulation class i, ingress protection ip 20, colour rendering index cri>80, temp range 0 to 45 ºc, driver efficency >85%, power factor >0.9, thd <20% as per iec 61000 3 2, colour temp 6500k, surge protection 2.5 kv, 50000 burning hrs ( min ) as per l70 criteria, two stages isolated constant current operated driver with range 150 270v ac and safety extra low voltage safe level <60v dc as per iec standard with lm70 & lm80 certification and connecting the same in electric source with and using pvc sheathed and insulated 3 core copper conductor cable of size 0.75 sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed. 80 s&f led bulk head luminaire internally prewired with and including premium quality diffuser for glare free light and easy to install samp fit installer complete with all accessories power consumption 10 wattluminaire lumen >1000 lm, system efficiency of > 100 lumens / w, with led binning as per ansi bin c78.377a, photo biological safety report as per iec624718 & electrical insulation class i, ingress protection ip 20, colour rendering index cri>80, temp range 0 to 45 ºc, driver efficency >85%, power factor >0.9, thd <20% as per iec 61000 3 2, colour temp 6500k, surge protection 2.5 kv, 50000 burning hrs ( min ) as per l70 criteria, two stages isolated constant current operated driver with range 150 270v ac and safety extra low voltage safe level <60v dc as per iec standard with lm70 & lm80 certification and connecting the same in electric source with and using pvc sheathed and insulated 3 core copper conductor cable of size 0.50 sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed. 81 s&fsteel body exhaust fans ac single phase 230 / 240 v of size 380 mm sweep and framewith louvercomplete all as specifed and directed. 82 m&l for earthing complete with galvanised earth plate electrode 60x60 cmx6 mm thick, burried directly in ground ( earth pit not less than 2.25 metres deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire, 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 conneted to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.note: on testing after completion if desired earth ressistence is not obtainde. the earthing will be redone at no extra cost. 83 m & l sand cushioning for u / g cables in layers of 23 cm thick ( 8cm before laying the cable and 15cm thick after laying the cable ) in trenches completeandall as specified and directed . ( note : punned down volumeshall be measured ) . 84 supply and lay burnt best quality locally available old size sub class b bricks laid in trenches perpendicular to u / g cable for cable protection complete all as specified and as directed. 85 s&f of 25 mm bore gitubinglight grade with all fittings laid across road, in trenches or across pcc drain, along electric pole or floor / wall for cable protection with suitable size of ms clamps and nut and botls / washers complete all as specified. 86 supply and lay in trenches or passing through pipe xlpe insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 6 sqmm 2 core complete all as specifiedand directed. 87 s&f ledstreet light fiting 35 watt 230 v ac outdoor type with high pressure die cast aluminum housing and heat resistand complete with driver, lmap bracket with impact and corrosion resistant including thermal management in multiple optics complete withip 65 / 66 protection complete includingmarking ca no as size andstyle decided by engineer in charge but not exceeding complete all as specified and directed....

Department of Higher Education - Uttar Pradesh

37976959 bids are invited for supply of hardware mse stailess steel sliding door bolt 300 mm long and 15 mm dia of shaft. , stailess steel sliding door bolt 250 mm long and 15 mm dia of shaft. , supply of cp iron sliding door bolt 250 mm long and 15 mm dia of shaft. , supply of cp iron sliding door bolt 300 mm long and 15 mm dia of shaft. , supply of stain less steel door handle 6 inches long , supply of iron tower bolt berrel type of size 150 mm long and 10 mm shaft diameter , supply of stainless steel tower bolt barrel type of size 150 mm long and 10 mm shaft diameter , supply of m. s. oxidised pressed handle with nuts and bolts with nylone washer for steel window , supply of iron hinges 75 mm long for door isi mark heavy quality as per approved sample , supply of iron hinges 100 mm long for door isi mark heavy quality as per approved sample , hydraulic door closer universal type of isi mark as per approved sample of ritz or lustre or equivalent make for 900 mm wide door , supply of hexa blade single edged crown make , supply of narial jharoo of 500 grams weight of each jharoo properly bounded with steel wire , supply of phool jharoo of 500 grams weight of each jharoo properly bounded with steel wire , supply of ms door spring 6 inches long ritz make , iron hinges with bolt and nut for ms door 100 mm size , supply of iron hooks 3 inches or 4 inches long for gi pipe , supply of ms box type hinges , supply of alluminium door stopper heavy quality double rubber , supply of ms steel window handle fitting , supply of galvanised ss wire gauge of size 3 feet wide and 50 feet long in each bundle. , supply of galvanised ss wire gauge of size 4 feet wide and 50 feet long in each bundle. , cp iron or ms nut with bolt round headed 2.5 inches long and 0.25 inches diameter in size complete as per approved quality 1 19 total quantity : 5185...

Military Engineer Services - Uttar Pradesh

37602723 repair/maintenance of joinery and allied items in md and otm accn under age b/r i at babina cantt 1 taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 sqm each etc complete all as specified and as directed 2 taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 sqm but not exc 4 sqm each etc complete all as specified and as directed. 3 taking down shutters of any description n.exc 1 sqm each etc complete all as specified and as directed 4 taking down shutters of any description exc 1 sqm and n.exc 2 sqm each etc complete all as specified and as directed 5 refixing shutter of any description exc 1 sqm but n exc 2 sqm each in same opening etc complete all as specified and as directed 6 refixing shutter of any description exc2 sqm each in same opening etc complete all as specified and as directed 7 s&f solid pvc frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with m.s. square tube, etc complete all as specified and as directed 8 s&f factory made solid panel pvc door shutter 30mm thick (style) constiting of frame made out of ms tubes for top & bottom rails, ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour pvc sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour pvc sheet to be fitted in the ms frame welded/selaed to the stiles & rails with suitable pvc sheet beading and joined together with solvent cement and fix in the frame at site complete all as specified and as directed 9 s&f factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed 10 m&l, anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 11 m&l foraluminium powder coated glazed door shutter( single leaf ) fabricated out of approved powder coated aluminium sections , shutter havingbottom rail of section size 114.50 mm x 44.50 mm x2.0 mm thick section, middle and top rail of section 84.50 mm x 44.50 x 2 mm thick section andstyles of section size84.50 mm x 44.50 mm x 2 mm thickand s & f 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including s & f powder coated butt hinges type c 1,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 nos (one on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 nos ) per shutter ,mortise lock , brass body ,6 levers ( 1 no) with duplicate keys, aluminium (extruded section) hydraulic door closer regulated designation no 3 universal type ( 1 no) & floor door stopper ( 140 mm ) overall ,aluminium body 1 no on each shtteretc complete all as specified and as directed. note: (i) shutter ( glazed ) shall be fixed on frame of required size and shall be measured seperately (iii) cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . note : the minimum thickness of powder coating shall be 50 micron . 12 m&l forpowder coated auminium glazed window / ventilator shutter, fixed type ,without sash bars usingapproved powder coated aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc completeall as specified and as directed. note : (i) the minimum thickness of powder coating shall be 50 micron.(ii) glass shall be measured and paid for seperately(iii) cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . 13 m&l for powder coated aluminium glazed window and ventilator shutters, side hung type without sash bars made of sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type c 21 100mm long (2 no.) aluminiumhandle (1 no.) per shutter etccomplete and as directed. note : (i)the minimum thickness of powder coating shall be 50 micron .(ii) shutter shall be fixed on frame of required size and shall be measured seperately (iii) glass shall be measured and paid for seperately(iv) cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . 14 m&l forpowder coated aluminium sliding window shutters ( shutters to be slide insuitabletrack system ) ( two panel shutter ) fabricated out of section for outer frame having weight not less then 1.17kg/rm, sliding window shutters made of sectionsall roundhavingweight not less than 0.42 kg/rm top rail , bottom rail and verticle styles and midlle rail of shutter having weight not less then 0.368 kg/rmand including providingnecessary powder coated aluminium fittings , 5mm thick tinted ,selected qualityglass ,stainless steel wire cloth .36 mm dia steel wire and apperture 1.18 mm and shutter provided with aluminium deco grill made of 10 mm quare bras and mesh size 50 mm both ways etcfixed with standard aluminium channel to outer side and including providingpowder coated aluminium handle , cleats and glazing clip special and suitable auto lock system , rubber gasket etc complete all as specified and as directed. 15 supply only5.5 mm thick sheet glass selected qualitytinted complete all as specified and as directed. 16 s&f in repair tinted glass and glazing with beading of any size of 5.5 mm thick complete all as specified and as directed. 17 s&f butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type c 21, 100 mm size in toilet with pvc doors etc complete all as specified and as directed. 18 s&f, plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed etc complete all as specified and as directed 19 s&f, pressed steel frames for doors(125x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed. 20 s&f, pressed steel frames for doors(105x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete. 21 s&f, locally fabricated plain framed paneled shutter 35 mm thick iindclass hw (any number & panels) with lock rail and panel of 9 mm b.w.p commercial ply or 12mm veneered particle board with commercial veneering on bothface, the size of rail and style as per is : 1003 (part i) kiln seasoned and chemically pressure treated etc complete all as specified and as directed 22 s&f, locally fabricated 35 mm thick iind class hw glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in ssr pt i sec 8 cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed 23 s&f, locally fabricated 35 mm thick iind class hw partly paneled& partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in ssr pt i sec 8 of 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed 24 s&f, 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the engineer in charge 25 ditto all as per item no20 above but 30 mm thick windows, ventilators etc provided with stiles and rails as specified in ssr pt i sec 8clause 8.20 (b) etc complete all as specified and as directed 26 s&f plain fillets, square, rectangular or triangular in section clean sawn secured with nails or brads iind classhw sectional area exc 6 sqcm but n exc 13 sqcm etc complete all as specified and as directed 27 s&f3mm thick, sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed. 28 s&f in repair 3 mm thick sheet glass, ordinary quality and glazing with wooden beads in square n. exc 0.5 sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround complete all as specified and as directed etc complete all as specified and as directed. 29 s&f galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of apertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. 30 s&f, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. 31 s&f, butt hinges medium weight cold rolled, mild steel and fixed 50 mm size etc complete all as specified and as directed. 32 s&f, butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete all as specified and as directed. 33 s&f, butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed. 34 s&f, aluminum handles cast type anodized 100 mm size etc complete all as specified and as directed 35 s&f, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed 36 s&f, aluminum anodized barrel tower bolts of extruded section 150 mm long etc complete all as specified and as directed 37 s&f, aluminum anodized barrel tower bolts of extruded section 200 mm long etc complete all as specified and as directed 38 s&f, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300mm long etc complete all as specified and as directed 39 m&l, prepairing surfaces of wood and wood based material, steel and iron work, new or old, of any desctiption and girth not otherwise desctibed and treated with tar or coal tar black paint etc complete all as specified and as directed 40 s&f, mild steel flat iron 25x3 mm as in hold fasts etc all as specified,confirming to fe 410 0 or fe 310 0etc complete all as specified and as directed 41 m&l,treating small articles such as stop, cover, hold fasts etc back of chowkhat etc area n.exc 0.1 sqm each etc complete all as specified and as directed 42 cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cm 1:3 or cement conc 1:2:4 type b1 as required exc half brick but not exc full brick walletc complete all as specified and as directed 43 m&l, pcc 1:3:6 type c1 using 20mm graded stone aggregate as in coping or bed plates for filling in holes of hold fasts or in pressed steel frameincluding necessary use and waste of form work etccomplete all as specified and as directed 44 m&l, two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed 45 m&l, framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to fe 290. gd e 165 etc complete all as specified and as directed 46 s&f, 1mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed 47 s&f in repair steel window or ventilator fixed type with glazing bars etc complete all as specified and as directed 48 s&f, in repairs steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specified and as directed 49 s&f, in repairs steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specified and as directed 50 supply only small fittings such as bracket of any type latch and hing block, shaped doors and window stops and the like incl all necessary articles n.exc 200 cucm each, made out ofiind hwetc complete all as specified and as directed 51 m&l, two coats ofsynthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed 52 s&f, in repair 225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed 53 s&f, 19/20mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed. 54 s&f, 12 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in pelmet boxes etc.n. exc. 15 cm width to timber frame work etccomplete all as specified and as directed. 55 m&l, for external teak wood lipping 6mm thick and 19/20mm wide fixed with nails on edges of pelmet boxes incuding wooden polishing on beading etc complete all as specified and as directed. 56 s&f hasp & staple safety type aluminium anodized with mild steel hinge pin incl bolt to hinge plate and fixed with screws 100mm size etc complete all as specified and as directed. 57 s&f, continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed. 58 s&f, 40mm dia mild steel bright finished cupboard knobs fixed with screw and washer etc complete all as specified and as directed 59 s&f 18 mm thick rajshri celuka ply of one side prelaminated and other side plain white colourto make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer in charge. note : modular kit accessories i.e. basketts, cutlery baskets, fittings and fixture will be measured and paid separately as supply only. 60 s&f 12 mm thick rajshri celuka ply ofboth side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer in charge. 61 s&fauto closing hinges 35 mm of 0 crank( kh 001) or8 crank (kh 002) openable at 110 degree for kitchen cabinet shutters,complete all as specified and as directed 62 s&f ball bearing runners 45 mm telescopic (kts 20) full extension load capacity 50 kgs, as directed. make kaff or equivalent in specifications 63 s&f stainless steel handles 100 mm sizefor kitchen cabinet shutters complete all as specified and as directed by engineer in – charge. 64 taking down unserviceable aluminium shutter of any description exc 1 but n.exc 2 sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed by engr in charge 65 taking down unserviceable aluminium shutter of any description n.exc 1 sqm each making easing, servicable, replacing rubber beading and refixing in the same opening complete all as specified and as directed by engr in charge 66 s&f, in repair aluminium (extruded section body) door closer hydraulic regulated designation no 3 uiversal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed 67 s&f, floor door stoper (140mm overall lengthofcover plate) aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed 68 s&f, in repair mortice lock alumunium body, vertical type of size 100mm of 7 levers etc compete all as specified and as directed 69 taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc and as directed. 70 m&l rendering10mm thick in cementmortar 1:6 on fair faces of brick or concrete surface of wall, surface finishedeven smooth with out using extra cement complete all as directed . 71 m&l rendering15mm thick in cementmortar 1:4 mixed with wpc , on fair faces of brick or concrete surface of wallsurface finishedeven and smooth,without using extra cementcomplete all as directed . 72 m&l for preparing newly plastered surfaces of wall and applying two coats of oil bound distemperover a coat of primeretc complete and as directed. 73 m&l for preparing onnewly plastered surfaces of wall and applying two coats of cement based paint over a coat of cement based primer etc complete and as directed. 74 demolition of brick work or stone masonary built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed. 75 m&l brick work with sub class b bricks straight or curved on plan exc 6m mean radious and built in cm 1:4 complete all as specified and directed. 76 m&l for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in cm 1:6, complete all as specified and as directed 77 m & l for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed 78 s&f in repair pvc bathroom cabinet with mirror of size 432mm x 311mm complete all as specified and as directed by the engineer in charge 79 s&f in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 80 taking down wall panelling and similar worketc and complete all as specified and directed 81 s&f forsolid pvc wall lining consisting of 5mm thick plain colourpvc sheet inclusive of solvent cement and fixing at site of 5mm thick pvc sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to pvc frame complete all as specified and directed 82 s&f in repair false ceiling with 9 9.5 mm thick gypsum board tiles laminated with white pvc film on face side & metalized polyster film (aluminium foil) on the back side with all four edges sealed with pvc filmof size 600 x 600 mm (595 x 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of tee/angle of weight not less than 300 gm per rm with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by the engineer in charge. 83 s&f in repairstainless steel curtain rod of 25 mm dia pipe quality h 304 etc complete and as directed 84 s&f brackets , fancy type suitable for 25 mm dia curtainrodcomplete and as directed 85 s&f end knob , fancy type for curtainrod 25mm diacomplete all as specified and as directed. 86 dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed. 87 m&l for 15mm thick screed bed or bedding layer in cm 1:6complete all as specified and directed. 88 m & l rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed. 89 m&l for glazed ceramic coloured tiles 300x200x 6 to7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 90 m&l, coloured non skid dark/light ceramic tile 7 to 8mm thick (square / rectangular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed 91 m&l, coloured non skid dark/light ceramic tile 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting /dado etc set and jointed in neat cement slurryand pointed in coloured cement to match complete all as specified and directed 92 m&l for vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 93 m&l for vitrified ceramic tiles 10 mm thick (square / rectangular) polishedarea of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match complete all as specified and directed. 94 s&f in repair glass self (500mmx60mm) with abs brackets (450x125x6) and fixed to wall with cp brass screws complete all as specified and as directed. 95 supply and fix in repair cp corner glass shelf with bracket fixed with screws complete all as specified and as directed by engineer in charge . 96 s&f stainless steeltowel rack fixed to wall with cp brass screws complete all as specified and as directed. 97 s&f in repair brass chromium plated tubular towel rail 20mm dia ‘d’ type 60 cm long between flanges alluminium anodisedall as specified and as directed. 98 s&f in repair stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed 99 s&f in repairs 100 mm long, aluminium handles, cast type, anodised complete all as specified and as directed 100 s&f in repairs 150 mm long, aluminium handles, cast type, anodised complete all as specified and as directed 101 s & f in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed 102 s & f in repairaluminum siliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed 103 s&f in repairms butt hinge 75mm ,cold rolled medium weight complete all as specified and directed. 104 s&f in repairms butt hinges, cold rolled medium weight 100mm in size complete all as specified and directed. 105 s&f in repair 250mm aluminium alloy,anodised,sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing boltsand sliding bolts of extruded sections and fixed complete all as specified and directed. 106 s & f in repair 75 mm size aluminium anodised hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and as directed. 107 s&f as in replacement of dust guard vertical type venation blind of approved colour including all items for fixing the same in windows complete all as specified and directed with specifications given below : (a) (i) material – p.v ( polyester vishcoues). (ii) width – 100mm (iii) thickness – 0.55mm (iv)reflecting black – no specification for roller plate : (b)(i) material – aluminium with powder coating. (ii) weight – 330 gm/mtr (approx) (iii) height – 25mm (iv) width – 50mm 108 dismantling asbestos cement ,galvalume fiber sheet ( plan corrugated,semicorrugated, etc.) sheets in roof coverings all as specified and directed 109 m & lfor 6 mm thick asbestos cement corrugated sheet, in roofs, wall etc and fixed with ‘l’ or j hooks or cranked bolts with washers complete all as specified and directed. 110 m & lfor 6 mm thick asbestos cement corrugated sheet, in roofs, wall etc and fixed with ‘l’ or j hooks or cranked bolts with washers. but except sheet (sheet shall be obtained from dismantling)complete all as specified and directed. 111 m & lfor asbestos cement plain angular ridge for corrugated or semi corrugated sheets 6 mm thick fixed with ‘l’or j hook or cranked bolts. 112 m & lfor pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm of an colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 113 m & lfor pre painted galvalume aluminium zinc coating gi based plain steel sheet 0.50mm of an colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 114 dismantling wrought iron or mild steel work of any description not otherwise provided all as directed and as directed 115 m&l for roof trusses, trussed, purlines, crane gantries, rail and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) complete all as directed and as directed...

Uttar Pradesh Jal Nigam - Uttar Pradesh

37275983 tender for rates for supply of materials & piece rated works ( labour rates ) at 08 nos additional class room in govt. girls inter college etawah ( nit no 306 / e nivida / 46 dt. 15 04 2023 ) 1 cement ( opc / ppc ) 2 coarse sand 3 fine sand 4 brick m 150 5 tor steel 8mm dia 6 tor steel 10 mm dia 7 tor steel 12mm dia 8 tor steel 16mm dia 9 tor steel 20mm dia 10 binding wire 11 stone grit 10 20mm 12 stone ballast 40mm 13 white cement 14 brick bats 15 flush door ( single leaf 35mm ) 16 flush door ( double leaf 35mm ) 17 angle iron ( 40x40x5 ) 18 10mm square bar 19 z section ( f4 & f7 ) 20 hold fast 21 sliding bolt ( 250x16 ) 22 tower bolt ( 250x10 ) 23 ms handle125mm 24 door stopper 25 obd paint ( 20 lt ) 26 exterior paint ( 20 lt ) 27 enamel paint ( black ) 20 lt 28 putty ( 40 kg ) 29 red oxide ( 20 lt ) 30 glass panes 4mm thick 31 glass strip 32 ss railing 33 pvc pipe 110mm ( 4 inch ) 34 pvc elbow 110mm 35 pvc socket 110mm 36 pvc tee 110mm 37 pvc solvent 38 ms clamp 110mm 39 moduler ms box ( 8x3 ) with sheet 40 conduit pipe 20mm 41 surface junction 20mm 42 pvc bend 20mm 43 pvc saddle 20mm 44 m.s. fan box 45 cico tapecrete p151 46 heptrachlor 47 earth work inexacavationin trenchesfor foundations and for pipes cables etc.inordinary soil ( loan clay orsand ) including lift upto 1.5 mand leadup to 30m.&including filling watering& ramming of excavated earth in to trenchesor into the space betweenthe building & the sides of foundation trenchesorinto the plinthandremoval&disposal of surplusexcavated earthas directed by the engineer i / c upto a distance of 30 m from the foundation trenches. 48 fillingof carted earth. 49 labour charge for laying cement concrete 1:4:8 ( 1 cement :4 fine sand :8 graded brick aggregate 40 mm nominal size ) and curing complete, in foundation and floors. 50 labour charge for post constructinal injecting antitermite treatment as per specification. 51 labour charge for r.c.c. workwith cement approved coarse sandand2cm. ( 3 / 4 ) guageapprovedstoneballastin the proportion 1:2:4, ( 1 cement :6 coarse sand :4 stone gritt. ) in lintels of doors and windows. including tools and plants etc, required forproper completion of the works. strength of the concrete shall not beless than m 15. 52 as in item 51 above but for f.f. add 1% for f.f 53 as in item 51 above but forslabs ( using 1:1.5:3 mix concrete ) 54 as in item 53 above but forslab f.f. add 1% for f.f 55 as in item 51 but for thelighterbeams i.e. havingspans upto 6 m. ( using 1:1.5:3 mix concrete ) 56 as in item 55 above but forbeam f.f. add 1% for f.f 57 as in item 51 abovebut inr.c.c.raft foundation and footing ( using1:1.5:3mix concrete ) 58 as in item 51 above but in r.c.c. columns in1:1.5:3having strength not less than m 200 59 as in item 58 above but forcolumn f.f. 60 labour charge for centering and shuttering including strutting, propping etc. and removal of form forfoundations, footings, bases of columns, etc. for mass concrete 61 labour charge for centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers 62 labour charge for centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts 63 labour charge for centering and shuttering including strutting, propping etc. and removal of form suspended floors, roofs, landings, balconies and accessplatform 64 labour chaege for brick work in1:6cement and coarsesandof1.25finenesmodulus mortar infoundation and plinth , including tools and plants etc. requiredforpropercompletion of the work. 65 same as in item no.59above but in super structureaboveplinth levelup to floor two level ( up to two storeys ) including necessarycutting andmouldingofbrickworkas requiredandalsoincludinghoney combed brick work in thickness of wall more than 12cms. 66 as in item no 60 above but forf.f. 67 same as in item no.59 but in1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below. 68 labour charge for layingdampproof coarse 25 mm thickwithcement concrete 1:1.5:3 ( 1 cement:1.5 coarsesand :3 graded stoneaggregates 13 mm nominalsize ) andcuring complete. 69 labour charge for paintingon d.p.c. withtwocoatsof airblown bitumen 85 / 50or 85 / 25 @ 1.7 kg / sqm approx. 70 labour charge for layingbrick coba 12mm thick laid with m.150 class brick bat coba 7.50cm. thick with gap of 15mm to each other. over 20mm. thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filed gaps of coba & top of coba mortar mixed with water proofing compoond. in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmx30cm. & side wall parapet shall be mono tythic plaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight &including t & p etc. com.for proper completion of work. 71 labour charge forfixingof flushdoors commercialqualityconformingtoi.s. 2202 part i ( 1983 ) includingfixingofwoodencleats andstoppers and including ixing andadjustment of hinges, bolts, locks, handle, springs and other fittingsbut excludingtheir supply and including painting with two coats of black japan painton alliron fitting if necessary.fittingwith necessaryscrews to be supplied departmentally. ( a ) 35 mm thick 72 four double leaf shutters addextra in over all rates. 73 labour charge for fabrication of holdfastfordoor chaukhats and windows. 74 labour charge for fabrication of grill / staircase railing. 75 labour charge for fabrication ofz section steel windows. 76 labour charge for fabrication of angleiron doorchaukhat of 40*40*5 mm. 77 labour charge for fixingofsteelorwoodenchaukhats in position. door chaukhats 78 labour charge for fixingofsteelorwoodenchaukhats in position. window chaukhats 79 labour charge for mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( whennot includedin anover all rates ) wroughttorequired shapeas necessary including cutting, bending and binding for proper completion of the workupto floor two level. 80 labour charge for 12mm thick plaster onoutersurfacewalls consistingor 12mm thick backingcast of cement mortar. 1:6 ) 1 cement:6 coarse sand 81 labour charge for 12 mm cement plasterinsingle coat on rough sideofsingle orhalfbrick wall for interior plastering up to floor twolevelincludinginternalrounded angles not exceeding80mm ingirth and finshed even and smooth. ( 1 ) 1 cement:6 coarse sand 82 labour charge for plastering onceilingandsoffitsof stairs upto floor twolevelinsteed of plasteringonwall. ( 1:3 ) 83 labour charge for making grooves 10 to 12mmwidex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required. 84 labour charge for makingdrip courseinsun shadeor faciaasperdirectionof engineer in charge.required for proper completion ofthe work. 85 labour charge for cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement ( 25 mm thickfloor ) . 86 labour charge for 20 mmthickcementplasterindado / skirting in 1:2 consistingof onepartof cement and 2 partsof aprovedcoarsesand laid inpanels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including t & p etc. required forpropercompletionofthe work. 87 labour charge for painting ist coat over priming coaton steel andothermetalsurfacesup to 10 cm. widthorgirthorsmall articles not exceeding 0.10sqm in area white superior synthetic enamelspecified brushingtogiveanevenshadeand including cleaningthe surfaceofall dirt, dust and other foreignmatter sand paperingand stoping , includingtoolsandplants etc. required forpropercompletion of the work. 88 same as item 87 abovebutonnew wood surface. 89 labour charge for finishing walls with water proofing cement paint of approved make and quality new on new work with two coats to give & even shade , includingt & p etc.required for completion of the work. 90 labour charge fordistempering ( two coat ) withoil bound distemper of approvedbrand and manufacture&ofrequired shadeon undecorated wall surface to give an even shade over &includingapriming coat with cement primer of approvedbrand& manufacture afterthoroughly brushing the surface free from mortar droppings & other foreign matters& alsoincluding preparing the surfaceeven with plaster of paris or approvedsynthetic material & sand papered smooth. 91 labour charge for white washing two coat includingt&p etc.required for proper completion of the work. 92 labour charge for fixingpanesofglasswithatulorequivalent i.s.i. marked quality putty, brads and springs complete. 93 labour charge of glass strips fixing for flooring.35mm wide & 3 mm thick 94 labour charge for fixing oxidised sliding bolts16 mm dia with nuts and 250 mm long. 95 labour charge for fixing oxidised towerbolt with 9 mm dia and screw. 96 labour charge for fixing oxidiseddoorhandleswith screws 150 mm long. 97 labour charge forfixing on wall face unplasticised rigid pvc rain water pipes conforming tos:13592 type a includng jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion. 98 labour charge forfixing on wall face unplasticised pvc clips of approved design tounplasticised pvc rain water pipe by means of 50mmx50mmx50mm hard wood rings screwed with m.s. screws of required lengthincluding cutting brick work and fixing in cement morter 1:4 ( 1cement:4coarse sand ) and making good the wall etc.complete. 99 labour charge for fixing 125mm dia c.p. grating in place of c.i. grating over floor traps. 100 labour charge forfixing and concealing of 20mm dia 2mm thick pvc conduit pipe with isimark embossed and with pvc acessories confirming to is no.3410 for drawing wires duly sealed at jointswithorginal resin / adhesive to makethe complete piping rigid plaster with cement sand morter finished to level with matching colour includingt&p etc.requiredfor proper completion of work. 101 labour charge for fixing of hexagonal fan box with hexagonal side of approx 80mm in lengthfabricated from 16swg m.s. sheetncorporating 10mm dia m.s. round barduly bent for supporting fan hanger dully painting with red oxide and screwing arrangementwith wiring. conduit laid in the r.c.c. roof before concreting along with t&p etc. for proper completion of work....

Military Engineer Services - Uttar Pradesh

37099473 repair, replacement of joinery, steel window, ventilators, pvc doors, glass panes, wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony under ge (i) r and d kanpur....

Military Engineer Services - Uttar Pradesh

36317563 repair, replacement of joinery, steel window, ventilators, pvc doors, glass panes, wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

36277085 provision of borewell in tech area and upgradation of stores at various location at north camp under ge ( af ) bamrauli trial bore well of 200 mm dia size pilot bore through any soil strata including hard stone / boulder by means of directrotary method below ground level complete all as specified & directed by engineer in charge. note: unit rate quoted by tender shall be deemed to include cost of ms pipe and transportation of rig accessories required, developing and testing etc at site of work and removal of the same on completion from the site including necessary supervision and rent charges of rig machine compressor & op unit ( any other t&p not specifically mentioned ) in respective item of sch aand no extra payment shall be admissible on this account. 2 drilling reaming vertical bore 525 mm dia at approved site / location in any type of strata for 250erw casing pipe for various depth as shown below including all works pertaining to boring complete in all respect and all as specified & directed. 3 ( a ) reaming up to 525 mm dia for 60 mtr depth from ground level for casing pipe 250 mm dia. 4 ( b ) reaming up to 525 mm dia for exceeding 60 mtr to 150 mtr for casing pipe of 200 mm dia. 5 supply and assembly including jointing, lowerings and fixing in position erw plain steel pipe ( seamless ) housing pipe 250 mm bore ( nominal dia ) 8.00mm thick and outer dia of pipe 266 mm conforming to is 8110 2000 class 8.1.1 plain end pipe jointed and welded couper ring ( welding shall be done through out the circumference of the pipe and coupler ring both sides all as specified and directed by eic. make : jindal / tata. note : ( a ) length of pipe shall not less than 2.40 mtr except where the pipe length required is less than 2.40m ( b ) effective length shall only be measured and paid. 6 all as per item no 3 above but supply assembling, jointing plain ms pipe ( seamless ) casing 200 mm bore 8 mm thick and outer dia of pipe 216 mm conforming to is 8110 2000 complete and lowering and fixing position after socket reducer of 250x200mm bore. 7 s&f ms strainer ( slotted ) pipe v weired 200 mm bore, 8 mm thick conforming to is 8110 2000 fabricated with pipe or specification mentioned above ( item no 3 ) slot of size 1.55mmx75mm as per is provn uniformly distributed on the surface all as specified. 8 s&f mild steel reducing socket 250mmx200mm dia of suitable length including welding, mild steel strip 40x6mm 2 nos on each joint extended in 75mm on each side all as specified. ( the wall thickness of socket not less than 8 mm thick. 9 s&f wrought iron bail plug 200 mm bore, all as specified. 10 s&f well cap for 266 mm dia housing pipe all as specified and directed. 11 s&f two nos ms flat iron 150 mm x 15 mm housing clamp for holding to 250 mm dia housing pipe with 16mm ms bolt & washers including casting of pcc blocks 1:2:4 type b 1 using 20mm graded stone aggregate of size 1.20 m x 1.00 m including 50mm dia ms pipe 2 nos each 1.5mtr long with cap plug and cap top for filling pea gravel including necessary excavation & each work in any type of soil complete all as specified and directed. 12 m&l for packing pea gravel of size 3 to 5mm natural shape brought direct from river bank and packing around casing pipe to entire depth up to ground level all as specified anddirected. ( length of assembly packed only be measured for payment ) 13 development of tube well by means ofhigh velocity compressored airwith 350 psi air compressor all as specified in is 11189 1985 para 4.2including arrangment for equipment fitting. 14 supply of sodium meta hexa phosphate for disinfecation of bore well all as specified and directed. 15 development of tubewell bymeans of over pumping for subsequent hours until clear discharge as per clause 9.3.2 of is 2800 ( part 1 ) 1991all as specified and directed. 16 supply only strata sample box with glass cover 3mm thick and having internal dimension 1.0 mtr x 0.60 mtr x 0.10 mtr made out of shisham plank 20mm thick with hinges, hasp and staples including polishing complete with samples at various depth met at the time of boring including stata chart in duplicate. 17 chemical bilogical and potability testing of water sample taken from the bore at govt approvedlaboratories. note: test certificate obtained from approved lab will be submitted by the contractor in original. 18 yield testing for bore well by continuous pumping for 16 hrs to determine safe pumping yield of the tube well as perclause 5 of is 2800 ( part ii ) 1979 complete all as specified and directed. 19 electric logging in trial bore precise delineation of granular zones and also the quality of ground water including report interpreatation complete all as specified and directed. note: electric logging shall be carried out by approved agency. 20 s&f air release valve suitable to connect column pipe of rising main flanged and column pipe or submersible pump set compelte with nut, bolt washer etc including grouting 4 bolt on pcc plateform all specified 21 supply, lowering, jointing and testing ms black column pipe 3 mtr long heavy duty 100 mm bore wall thickness 5 mm both ends flanged with heavy duty ms flanged not less than 16 mm screwed and welded in side and outside. the flanged end making surface shall be smooth including welding of 04 strip of 5 mm thick 25 mm wide and 50 mm long covering pipe and flanged, both end flanged having 08 nos predrilled hole not less than 16 mm including rubber gasket, nut bolts and washer, pipe should be duly painted with anti corrosive paint complete all as specified and directed. 22 supply, fixing, jointing and testing of cast iron non return valve 100 mm dia flanged ends as per is 5312 ( isi marked ) complete with washer nuts / bolts and rubber gasket complete all as specified and directed. 23 supply, fixing, jointing and testingof cast iron sluice valve 100 mm class i ( isi marked ) pn 1 typelatest is 14846 2000 flanged ends, drilled having stainless steelspindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etccompleteall as specified and directed. 24 supply, installation, commissioning and testing submersible pumping setmulti stage electric driven of 10 hp capacityat operating head range 10 40 mtr head, directly coupled with electric motor, ac 3 phase, 415 volts, 50 hz, 2900 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 100 mm dia flanged column pipe and one set of essential tool with price list, literature as recommended by manufacture complete complete all as directed. 25 s&f submersible pump controller in sheet enclosure type mu g20 fully autimaticstar delta starterfor threephase motor 415 volts, 50 hz, 3 phase, 15 hp, 9 14 amps relay range all as specifiedmake : l&t cat part no. :ss95984coaoor equivalent 26 s&f in replacement of pvc insulated flat copper submersible cable heavy duty 16 sqmm 3 core 1100 volt grade of the following size complete all as specified and directed. make havells / plaza / finolex 27 supply and fix high pressure single head adjustable chlorine dosing system including frp pressure dosing tank of capacity 100 ltrs consisting of water inlet line, outlet with y strainer, drian, overflow, conical bottom for sludge deposition , pot hole with cover, level gauage with agitation motor 120 watts 960 rpm, single phase flange mounted motor with plastic shaft and impeller connected to frp service dosing tank of capaicty 100 lts consisting of water inlet line, dozing injector 230v, 50hz including on / off switch and stokes / minute of max 135 min. 15 with motor, discharge pressure 10kg / sqcm, high flow rate of 0 25 lph including drain, overflow level gauge, inspection port, agitator motor 120 watts 960 rpm single phase flange mounted with plastich shaft and impeller including mounting lid, complete all as directed. make: aquafit or equivalant 28 supply & laying in trenches ductile iron ( di ) pipe of size 100 mm bore dia with spigot and socketed ends centrifugally cast class k 7 in any length laid in trenches including di fittings and jointing materails complete all as specified and directed. 29 m&l for 100 mm bore cast iron ( di ) fittings such as bends ( any type, radius and angle ) tapers any type, ( straight, bend, increasing, decreasing or double socket etc ) tee pieces single branch, “y” junction, double branch, cross ( all sockets or socket and spigot ) collars, caps and plugs complete all as specified and directed. 30 supply and lay steel water tubing gi medium grade isi marked with all fittings laid in trenches or fixed to wall etc complete for the following sizes: make: jindal / prakash / swastik note : excavation and earth work will be measured and paid separately. 31 ( a ) 40 mm dia bore 32 ( b ) 25 mm dia bore 33 s&f gun metal gate valve isi marked with iron wheel head screwed both ends for iron pipes and fixed for the following sizes including taking down of unserviceable gate valves. make : zoloto / seico / jindal / upadhaya / venus 34 ( a ) 40 mm bore 35 ( b ) 25 mm bore 36 supply, install, testing and commissioning of busbar chamber of size not less than 60cm x 60cm x 25cm for 3 phase, 415 volts ac, outdoor type, cubical compartmentalised type, weather, vermin and water proof, fabricated out of 2 mm thick crca sheet powder coated front door openable with locking arrangemen and iron angleframe bottom of the panel board including 100 amps mccb , rated copper bus bar, phase indicator , 15 amps switch socket combined , grouted using pcc foundation 1:2:4 type c1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland including painting with two coat of powder coated painted over a coat of red oxide primer complele all as specifed and directed. 37 m&l for earthing complete with galvanized steel earth plate 600x600x6mm thick buried directly in ground ( earth ) pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, gi pipe light grade 40mm bore for protection of gi strip from earth electrode to and including the earth test point of galvanised iron / steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate ) chamber and mild steel angle iron frame 40x40x3mm and rcc cover 40mm thick ( 1:2:4 ) type b 1 using 20mm graded crushed stone aggregate reinforced with 8mm dia tmt bars @ 75mm o / o both ways with mild steel handle 12mm dia, pgi funnel with wire mesh, 20 mm dia gi pipe light grade for watering all as shownin electrical plate no.3 of mes ssr part 1 38 supply, laying and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 25 sq mm 4 core all as specified. 39 m&l for boring of holes of 200 mm dia under the road / hard standing by horizontal boring method 2 mtr below the surface for fixing requiste 2 nos. all equipments & machinery required to carry out the work will be provided by the contractor ( if due to any obstruction during boring, reboring has to be done the same will be done by the contractor at his own cost the rates deem to cover the same ) complete all as specified and directed. 40 supply and laying sub class b bricks ( old size ) laid flat in trenches as cable covers all as specified and directed 41 excavation in trenches not exc 1.5 m wide and not exc1.5 m in depth and getting out in soft / loose soil as in foundation all as required and directed 42 m&l for returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as directed. 43 removal excavated material ( soil ) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as directed. 44 m&l for cement concrete 1:2:4 type b 2 ( using 40mm graded stone agg ) 100 mm thick as in floor and finish concrete surface even and smooth without using extra cost, complete all as specified. 45 m&l for cement concrete 1:4:8 type d 2 ( using 40mm graded stone agg ) 100 mm thick as in floor, complete all as specified. 46 m&l for rcc ( m 25 design mix ) ( 20mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concreate etc complete all as specified and directed. 47 m&l for rcc ( m 25 design mix ) ( 20mm graded stone aggregate ) as in columns, pillars, posts and struts etc complete all as specified and directed. 48 m&l for form work to sides of concreate foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams, and similar works vertical or to batter on fair finished surfaces foundation 49 m&l for form work to sides of columns, pillars, posts, struts, piers and stanchions on fair finished surfaces 50 s&f for 10 dia and over mild steel tmt reinforcement bars and spacers cut to length, bent to shape required including cranking, bending, blinding with and including mild steel wire ( annealed ) not less than 0.9 mm dia and necessary welding to reinforcement complete all as specified and directed. 51 s&f for 5 dia and over upto including 10 mm dia mild steel tmt reinforcement bars as in stirrups, spacers and blinders etc complete all as specified and directed. 52 m&l for rendering 10 mm thick in cement mortar ( 1:4 ) on fair faces or brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement. ( note: wpc will be measured and paid seperately ) 53 m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer etc complete all as specified. 54 s&f roof trusses ( framed ) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc complete all as specified and directed. 55 m&l for valve pit chamber of size 1050mm x 1050mm x 1050mm ( internal dimention ) complete including excavation and earth work, pcc 1:4:8, type d 2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 ( internally ) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 56 demolition of cement concrete ( un reinforced ) in ground floors and pavings not exceeding 15cm thickness ( below and above ground level ) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed. 57 m & l for pcc 1:2:4 type b2 using 40 mm graded stone aggregate as in sub base / mass concrete complete all as specified and directed. 58 m & l for 20 to 25 mm thick machine cut kota stone slab flooring, landing, steps and plateformover and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing andgrinding and polishingto achive mirror finish complete all as specified and directed. 59 m & lfor 20 to 25 mm thick machine cut kota stone slab on vertical surfaces such as skirting, risers of step, dado etcover and including 10mm thick bearing plaster in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and granite polishing complete all as specified and directed. 60 s&f framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) andhanging; also fastening and fixing complete 61 m&lfor pcc ( 1:2:4 ) type b 1using20 mm gradedstone aggregates as in filling on holes in walls, bed block for inserting hold fast and copingincluding necessary form workcomplete all as specified and directed. { the rate is deemed to be inclusive of form work } 62 excavation over area, n exc 1.50 mtr deep and getting out in soft loose soil complete all as specified and directed 63 removing excavated soil exc 1.50 km but n. exc 5 km and deposited wherever directed 64 m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed. 65 m&l for pcc 1:2:4 type b 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified as directed. 66 m&l for pcc 75mm thick type c 1 , 1:3:6 using 20mm graded stone aggregate as in plinth protection complete all specifiedas directed. 67 supply onlyglass dividing strips 38 mm wide fixed in floorcomplete all as specified and directed 68 demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. 69 m&l for brick work with sub class b modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete. 70 taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed 71 m&l for 15mm thick rendering in cm 1:3 on surfaces of brick, concrete wall, chajja surface finished even and smooth using extra cement with 2% wpc by weight of cement, appling two coat of polymer modified and cementitious, elastomemric waterproofing coating 1mm thick shall measure and paid seprately under respective item of as supply only complete all as specified and directed 72 supply only liquid water proofing compound 73 m&l for 15mm thick rendering in cm 1:4 on fair faces of brick work, surfaces finished even and faircomplete all as specified and directed 74 m&l for rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3top surfaces finished even and smooth without using extra cement complete all as specified 75 m&l for preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash on ceilingincluding washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . 76 m&l for preparation of new plastered surface of wall and applying three coats of whitewash on surface of wall incl cornice etc complete all as specified and directed 77 m&l for brooming down plastered or unplastered old decoratedsurface of wall incl cornice etc and applying two coat of whitewash complete all as specified and directed 78 taking down chowkhats or frames n. exc 1.5 sqm each ( without taking off shutter from the frame ) complete. 79 all as per srl item no 72but exc. 1.5 sqm but not exceeding 4 sqm each complete. 80 s & f factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast, complete with glazing bar, dovetailed or welded complete. 81 s & ffactory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast complete with ms flat for fixing wire mesh, dovetailed or welded complete . 82 supply only 3 mm thick plain sheet glass / pin headedfigured glass ordinary quality and glazing with oil putty or wooden beads / steel frame in square area n. exc. 0.5 sqm in each pane complete . note : fixing only rate is included in window / door shutter items considered therein 83 supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapplescomplete all as specified and directed 84 s & f 125x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 85 s&f flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. 86 s & f 35 mm thick of first class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge, etc., ( with sash bars ) size of members of shutters as specified in ssr part i section 8 clause 8.20 ( a ) supplied and fitted to chowkats complete all as specified and directed. 87 s&f ms flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to fe 290 ged e 165 88 m&l for pcc ( 1:3:6 ) type c1 ( using 20mm graded stone aggregate ) as in bed plate for fixing holdfast etc all as specified and directed. 89 s&f aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. 90 s&f aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames as in repairs all as specified and as directed. 91 s&f aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed. 92 supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b 21 of size 100mm all as specified and as directed. 93 s&f aluminium handles, cast type, anodised of size 100mm all as specified and as directed. 94 s&f 300 mm length aluminium alloy, anodised, sliding door bolts with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mmall as specified and as directed. 95 m&l for preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enammel paint. 96 m&l for preparation of old painted steel surfaces and applying one coat of steel painting complete all as specified and directed. 97 m&l for preparation of new steel surfaces and applying two coat of steel paint including primer on steel surfaces complete all as specified and directed. 98 m&l for surface of any discription not otherwise describedover 10 cm width or girth on new untreated surface with two coats of synthetic enammelled painting over one coat pink primer on wooden surface complete all as spd & directed. 99 s&f in repair rubber bead for wooden door 100 dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed 101 s&f pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 mpa as in roof covering to wall fixed with self tapping screws as specified. 102 taking down carefully aluminium battenpoint, wiring for light / fan / socket / bell or power point including. all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete and making good disturbed surfaces of wall / floor to match with the surroundings of wall / ceiling / floor etc including taking down old light fittings. note : ( i ) contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in mes store yard. ( ii ) quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. ( iii ) decision of ge shall be final and binding in respect of serviceability of fittings / fixture. 103 m & l for point wiring complete with 1.5 sqmm single core pvc insulated frls cable 1100 volts grade with multi stranded copper conductor drawn through new pvc concealed conduit medium grade, isi markedand including provision of 1.5 sqmm pvc insulated copper cable frls as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings: 104 ( a ) one light / fan / bellpoint controlled by one switch single pole one way 105 ( b ) all as per item no 97 here in before butone3 pin 6 amp switch socket out let independent . 106 ( c ) all as per item no 97 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete . 107 all as per item no 97 here in before but using 02 nos. 4.0 sq mm size for main cable and 01 no.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board. 108 supply and fix switch modular flush 6a single pole one way isi marked 109 supply and fix modular sockets 6 amp 2 in 1 2 / 3 pin combined all as specified and directed. 110 supply and fix switch modular flush type 15 / 16 amp single pole one way 240 volt one module isi marked 111 supply and fix modular sockets 16amp 2 in 1 3 / 5pin combined all as specified and directed. 112 supply and fix ceiling rose surface bakelite 60x25mm three terminal 113 s&f led batten luminaire surface mounted, 4 feet system wattage of 20 watts, system lumen efficiency >90 lumen / watt, 6500kandincluding connectingfrom ceiling rose to fitting completeallas specified and directed. 114 supply and fix in replcementflood light 30 watt 240 volt 50 htz 3000 / 6500k 120 lumen / wattip 65complete all as spd and directed. 115 supply & fix mcb db spn 8 way, double door, ip 43, ik 09, isolated neutral bar and fixed flush to wall and suitable for universal mounting completeall as specified and directed. 116 supply and fix mcb, single pole and neutral, 230 volts, 32 to 40 amp rating, c series fixed in dbs catered here in before. make legrand / hager / siemense 117 supply and fix mcb sp 6 32 amps 240 volts 10 ka 50 hz c curve complete all as specified and directed by engineer in charge 118 supply and fix wall mounted fan 400mm size, 230 volts , 50 hz 1420 rpm with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed. 119 m&l for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 metres deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia asearth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3, mes ssr part i 2009 with 15 mm dia medium grade gi pipe as a protection to earthing lead and 20 mm dia medium grade gi pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, rcc pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. notes ( i ) the concrete pit shall be pcc ( 1:3:6 ) type c 1, 40mm thick precast cover slab of rcc with suitable mild steel handle in lieu of cast iron cover shown in electrical plate no 3 of mes ssr part i ( ii ) pcc pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. ( iii ) item includes the cost of 7.5 metre earth lead wire andgi pipe for protection of earth wire. any varriation in quantity shall be adjusted. 120 supply, laying, jointing & testing of underground lt cables xlpe insulated, pvc sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 volt grade cross sectional area 16 sqmm 2 core laid in trenches / ducts / along poles / through pipe under road etc with new aluminium lugs....

Indian Institute Of Management - Uttar Pradesh

36159570 percentage annual rate contract for replacing the existing mild steel windows and ventilators with aluminum windows and ventilators in residence houses at iim lucknow for 02 years...

Military Engineer Services - Uttar Pradesh

35717250 repair, to joinery, steel window, ventilators, flooring, pcc, kota stone, floor tiles, wall tiles, plaster, sanitary and plumbing fixtures, cup boards and certain other b / r works in drdo, dgqa pool qtrs at war memorial colony, rcma under ge ( i ) ...

Military Engineer Services - Uttar Pradesh

35698337 repair, replacement of joinery, steel window, ventilators, pvc doors, glass panes, wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony under ge ( i ) r and d kanpur...

Military Engineer Services - Uttar Pradesh

35353121 tender for maintenance works of petty nature of building at stn bareilly under ge ( e ) bareilly. taking down existing gi tubing 15 mm dia & connections and refixing old servicable pipe with new all fittings and fixed to wall, ceiling or laid in floors complete all as specified and as directed. 2 taking down existing gi tubing 20 mm dia & connections and refixing old servicable pipe with new all fittings and fixed to wall, ceiling or laid in floors complete all as specified and as directed. 3 s&f gi tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing gi tubing 15 mm dia & connections complete all as specified and directed. 4 s&f gi tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing gi tubing 20 mm dia & connections complete all as specified and directed. 5 supply and fixing in repairs 15 mm bore float valve of high pressure ptmt with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situatedup to 16m height buildingincluding necessary ladder for climbing and including replacement of gi nipples and otherfittings if required complete all as specified and as directed. 6 all as per srl item no.5 here in before but 20 mm bore 7 s&f in repairs 10 litres capacity pvc valveless symphonic action type flushing cistern high / low level white complete with inlet, ball valve float and handle including brackets and telescopic down pipes and jointing with wc complete complete all as specified and as directed. 8 labour only for opening of air locks in toilets / baths and kitchen water pipe line but excluding fittings complete all as specified and as directed. 9 s&f in repairs brass sprindle for cp bib cock / piller cock / angle cock / concealed stop cock of various make 15mm dia complete all as specified and as directed. 10 supply only cp head for cp bib cock / piller cock / angle cock / concealed stop cock of various make suitable for 15mm bore pipe complete all as specified and as directed. 11 s&f in repairs bib tap pvc any colour / high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and as directed. 12 s&f in repairs pillar tap pvc any colour / high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and as directed. 13 s&f in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as specified and directed. 14 s&f in repairs sink mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as specified and directed. 15 fixing in repairswash basin mixer / wall mixer / sink mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as specified and as directed. 16 s&f in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 nos.concealled stop cock & 2 nos. bib cock for each mixer complete all as specified and as directed. 17 s&f in repair toilet paper holder chromium plated fixed with cp screws complete all as specified and as directed. 18 s & f in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure fancy type of15 mm bore size with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed. 19 s&f in repairs cast copper alloy cp angle valve type stop cock suitable for 15mm bore pipe screwed at both endsor high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 20 s&f in repairs cast brass alloy type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 21 s&f in repairs cast copper alloy cp two way bib cock suitable for 15mm bore pipe screwed at both endsor high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 22 s&f in repairs bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule including dismanteling and making good the tiles if required complete all as specified and as directed. 23 s&f in repairs bib taps of bore size 15mm, brass with butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 24 s&f in repairs bib taps of bore size 15mm, ci with butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 25 s&f in repairs brass cromium plated conceled stop cock of bore size 15 mm, in position conceledin walls / ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces including dismanteling and making good the tiles if required complete all as specified and as directed. 26 s&f in repairs 100 mm dia cp brass shower rose swivel type with extension cp rod 15mm dia and 300mm longwith connecting rod suitable for 15mm bore pipe complete all as specified and as directed. 27 s&f in repairs pvc connection 15mm size with ptmt nuts, of length 600mm complete all as specified and as directed. 28 s&f in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white ( minimum ) , with grating and union for discharge pipe including fixing plugs, bedding urinal against wall in cement mortar ( 1:2 ) etc. including cp waste fitting and pvc waste pipe complete all as specified and as directed. 29 s&f in repairs viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and cp waste fitting complete all as specified and as directed. 30 s&f in repairs vitreous china wash down water closetpedestal pattern ( ewc ) white excluding flushing cistern & inclwhite seat coverclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and as directed. 31 s&f in repairs vitreous china squatting pan orissa pattern size 580x440mm white with p or s trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc complete all as specified and as directed. 32 taking down the loosen ewc / whb / sink of any description and refixing the same with angle support to wall for whb and sink, for ewc screwing to floor and side joints filled with white cement for strengthening and making good complete all as specified and as directed. 33 s&f in repairs plastic seat cover white closed pattern with flat bottom and cover with cp hinges for ewc complete all as specified and as directed. 34 s&f in repairs cp waste coupling 32 mmdia for wash basin complete all as specified and as directed. 35 s&f in repairs cp waste coupling 40 mmdia for sink ( isi marked ) complete all as specified and as directed. 36 s&f in repairs 32 mmpvc flexible pipe for waste outlet with threaded socket at one end complete all as specified and as directed. 37 s&f in repairs 40 mm pvc flexible pipe for waste outletwith threaded socket at one end complete all as specified and as directed. 38 s&f in repairs cp health faucet special ( 1.5 mtr tube ) with hook for ewc complete all as specified and directed. 39 s&f in repairs brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed. 40 s&f in repairs soap dish stainless steel as approved by ge complete all as specified and as directed. 41 s&f in repairs gratingof 125 mm dia of stainless steel with or without waste hole complete all as specified and as directed. 42 s&f in repairs pvc ( swr ) pipe single socketed in any length with rubber ring joints, laid in floors 75mm dia complete all as specified and as directed. 43 s&f in repairs low density polyethylene pipes ( ldpe ) of pressure rating 6 kg / cm2 of40 mm dia borefor wash hand basin complete all as specified and as directed. 44 s&f in repairs pvc ( swr ) branch pieces, single ( single y ) equal or unequal or with parallel branches 75mm dia complete all as specified and as directed. 45 s&f in repairs for pvc ( swr ) bends, any radius, bore of pipe in 75mm with cement solvent in position complete all as specified and as directed. 46 s&f rotational moulded polethylene water tank of 500 ltrs capacity, white colour, isi marked ( cylindrical vertical with closed top with suitable size ofm s tasla with suitable locking system ) hoisted and fixed in position all as pacific ssr part i including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and as directed. 47 s&f rotational moulded polethylene water tank of 1000 ltrs capacity, white colour, isi marked ( cylindrical vertical with closed top with suitable size ofm s tasla with suitable locking system ) hoistedand fixed in position all as pacific ssr part i including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and as directed. 48 s&f in repairs stainless steel plate rack of size 31 x 30 x 10 with using stainless steel sheet of0.63mm thickness fixed with rawl plug and screw complete all as specified and as directed. 49 s&f in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed. 50 s&f in repairs pvc ( swr ) floor trap, plain with grating including jointing with solvent cement, trap with deep water seal and of heavy weight coated with tar / black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantled materials complete all as specified and as directed. 51 m&l to prevent leakage / seepage from roof area ( n exc 4 sqm ) shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg / sqm at 1mm thickness urp admixed with cement in 1:1 propotion without waterin 1 coats of make dr fixit or equivelant. the shall be tested with ponding test by engr in charge. if any failure occoured that shall be re done without any extra cost within 24 hrs complete all as specified and as directed. 52 m&l to prevent leakage / seepage from nahani trap / floor trap including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing system @ 2kg / sqm at 1mm thickness or urp admixed with cement in 1:1 propotion without water in1 coats of make dr fixit orequivelant. the shall be tested with ponding test by engr in charge. if any failure occoured that shall be redone without any extra cost with in 24 hrs complete all as specified and as directed. 53 taking down chowkats or frames not exceeding 1.5 sqm each with shutter ( without taking off shutter from the frame ) complete all as specified and as directed. 54 taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutter ( without taking off shutter from the frame ) complete all as specified and as directed. 55 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube, suppling & fixing in opening as per specification & drawing complete all as directed. 56 s&f 30 mm thick factory made solid panel pvc door shutter 30mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails, m.s. frame shall be covered with heat moulded palin colour pvc `c channel heaving a pvc sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s frame wedded / sealed to the stiles, & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 57 s&f in repairs 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specifed as directed 58 s&f for 40mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 59 s&f 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles ( hollock ) , prepared to receive glass / gauge etc without sash bars, edges of framing plain cham fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in ssr part i ( 2009 ) section 8 and as per is 1003 ( part i ) kiln seasoned as per is 1141 and chemically pressure treated as per is 401 complete all as specified and as directed. ( note : s & f wire messshall be measured and paid for separately ) 60 repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring, and hinge, refixing shutter in same opening with all necessary repairs / refixing including replacement of damaged jointing cleats, glazing clips, rubber packing, aluminium beading, screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail complete all as specified and as directed. note ( i ) work shall be carried out in md qtrs / otm accns in different locations of ge ( east ) area as per site requirements upto 4 storieyed building ) ( ii ) hydrolic door closer / door spring if preplaced under separete items 61 all as per srl item no.60 here in before but aluminium windows of any type / mechanicium except ofwire mesh / glass shall be paid under separate item above the rates includes replacement of rollers / sliding arrangement / locking arrengments / any types of hinges. if during repalcement of wiremesh / glass window requires dismanteling of complete window with frames and shutters the same shall be carried out and the rates are deemed to included such provisions under this item and nothing shall be paid extra. 62 m&l for powder coated aluminium sliding window with anodized aluminium frame of3 track of size 92mmx32mmx 1.5mm thick, with sliding shutters ( 02 glass and 01 wirecloth ) with necessary channels ( top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick ) including glazing with tinted sheet glass panel 4.00mm thick and aluminum alloy wirecloth 004mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips, locking device one for each shutter, rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified and as directed.note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 63 m & l for providing aluminiium shutter with powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size85 mm x 44.5 mm x 1.56 mm thickwith200 mm size powder coated2 nos with each leaf , heavy duty powder coated aluminium tower bolt 150mm long 2 nos per leaf, 3 nos heavy duty aluminium powder coated of size 125mm with each leafincluding 12 mm thick both side prelaminated particle board / 5.5 mm thick glass panein the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed. note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 64 s&f aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazingcleat and revolving arrangement of standard section of aluminiumincluding rubber packing, aluminium beadingor gasket forfor aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed aluminium wire clothetcall as specified and directed.note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 65 s&f in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of keys complete all as specified and as directed. 66 dismantling of existing aluminium door / window upto 4 sqm each complete all as specified and as directed. 67 s&f 150 mm aluminium anodised barrel tower bolts of extruded section, isi marked complete all as specified and as directed. 68 s&f 150 mmextruded aluminium alloy handles, fabricated type, anodised, isi marked complete all as specified and as directed. 69 s&f 100 mm ms butt hinges medium weight cold rolled mild steel compete all as specified as directed by engineer in charge 70 s&f 300 mm longand mild steel chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 71 s&f mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by engineer in charge ( work shall be carried out in md qtrs / otm accns in different locations ofof aor ge ( east ) bareilly ) 72 s&f in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti complete all as specified and as directed. 73 m&l two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and as directed. 74 s&f in repairs floor door stoppers double leggedof aluminium alloy body & tounge aluminium anodisedalloy with rubber fixed with steel screws on the door frame of size 150 mm long complete all as specified and as directed. 75 s&f in repairsaluminium anodized hasp & staple saftey type with mild steel pin hinge including bolt to hinge plate fixed with screws of 100 mm size complete all as specified and as directed. 76 s&f in repairs 50 mm aluminium anodised barrel tower bolts of extruded section, isi marked complete all as specified and as directed. 77 s&f in repairs 150 mmextruded aluminium alloy handles, fabricated type, anodised, isi marked complete all as specified and as directed. 78 s&f in repairs 100 mm ms butt hinges medium weight cold rolled mild steel complete all as specified and as directed. 79 s&f in repairs 300 mm longand mild steel chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 80 s&f in repairs helical door spring 250mm size with roller and roller plates of mild steel incl welding to angle iron plate or fixing with wooden / steel chowkhats as required and as specified including necessary welding where ever required complete all as specified and as directed. 81 s&f of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 sqm complete all as specified and as directed. 82 s&f in repairs 3 mm thick figuredglass ordinary quality and size in any type of frames and glazing with oil putt ( or beading ) in square exc. 0.5 sqm each including hacking out old glasses complete all as specified and as directed. 83 s&f for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane for steel / aluminium windows including hacking out old glasses complete all as specified and as directed. 84 s&f in repairs gi wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing ms beads and ss screws complete all as specified and as directed. 85 s&f in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or pre painted wooden beeding patti complete all as specified and directed. 86 s&f in repairs aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for aluminium window and ventilator complete all as specified and directed. 87 m&l for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal towelded exc 6mm but n exc 9mmfor steel windows, ventilators door frames, door hinges, door springs etc complete all as specified and as directed. 88 s&f in repairs stainless steel work as gde 304 ss in railing / swimming pool ladder / grab bar / supports including all fitting and fixing complete all as specified and directed. 89 s&f in repairs rubber based door bottom strip with aluminium angle not less than 25x25mm including fixing arrangement with screws properly & all as per manufacturers instruction complete all as specified and directed. 90 m&l for drilling holes for pipes etc in cadappa / graniteincluding rcc slab nexc 25mm dia and nexc 100mm depth complete all as specified and as directed. 91 s&f in repairs ss 25 mm dia bore and 1.5 mm thcik fancy type curtain rod fancy type brackets cut to length as required in sigle or doble layer of approved colour complete all as specified and as directed. 92 s&f in repairs ss fancy type end balls fixed to ss rod as approved by engr in charge 93 s&f in repairs 12mm thick toughened glass making provision of hole for all ss for glass fitting including itching logo as approved, edge polishing and drilling hole for fittings as in railing complete all as specified and as directed. 94 all as per srl item no.93 here in before but including ss patch fittings for single and double leaf in door 95 s&f in repairs double action floor spring hydraulically regulated made isi marked of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 96 supply and fixing 18 long ss handle set for door complete all as specified and as directed. 97 s&f in repairs ss lock for toughened glass door set complete all as specified and as directed. 98 taking down cement plasteron brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed., 99 m&l for 15mm thick rendering on brick / concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick / concrete surface in patch workin cm 1:4 and finishing fair and even without using extra cement with including using 2% integral water proofing compound by wt of cement note: ( i ) cost of water proofing compound deemed to be included in item ) ( ii ) the rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m includingall safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible. 100 all as per srl item no.99 here in before but 5 mm thick rendering in cement plaster 1:4 on ceiling in patches 101 m & l for preparing plasteredsurfaces of wallsand applying three coats of white wash complete all as specified and as directed. 102 m&l preparation of new plastered surface and applying 3 coats of white wash on ceiling complete all as specified and as directed. 103 m&l for filling floor / glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly complete all as specified and as directed. 104 demolition of cement concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) and removing the rubbish complete all as specified and as directed. 105 m&l for 25 mm thick plain cement concrete 1:2:4, type b 1 ( using 20 mmgraded stone aggregate ) as in sub bases, sub floors complete all as specified and as directed. 106 m&l for vitrified glazed ceramic coloured / double charged / ultra charged tiles 9 10 mm thick square / rectangular ) polished area of each tile 800 mmx 800 mm / 600mmx1200 mm size approved by ge in floors etc. set and jointed in neat cement slurry and pointed in matching colour5 mm thick epoxy filling in between tiling over andincluding 15mm thick screed bedin cm 1:6 complete complete all as specified and as directed.note : engr in charge will select sample from latest catalouge. 107 dismantling, floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 108 m&l glazed ceramic coloured tiles ( square / rectangular ) with borderin vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry andpointed in white cementor colouredcement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. note : engr in charge will select sample from latest catalouge. 109 m&l providing non skid glazed ceramic tiles coloured 7 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in cm 1:6 complete all as specified and as directed. note : engr in charge will select sample from latest catalouge. 110 m&l 75 mm thick pcc 1:4:8, type d 2 ( using 40mm graded stone aggregate ) as in sub base floor / pavings complete all as specified and directed. 111 m&l pcc 1:1½:3, type a 1 ( using 20 mm graded stone aggregate ) as in floors, surfaces finished fair and even complete all as specified and as directed. 112 m&l forming contraction ( dummy ) joints 65mm deep x 10mm wide, filled with sealing compound grade a complete all as specified and directed. 113 m&l in repairs for machine pressed pre cast concrete interlocking coloured paver block, glossy finish and shape and size conforming to is 15658 2006 of 100 mm thickness m 50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. 114 m&l for making duct for window ac in wall / window with outside ms grill of squre / round bar of 12 mm dia and inside sliding arrangement of acrylic sheet sliding type including demolition of brick work, plastering and making good the surfaces with cement plaster andplaster patta 50 mm wide all over opening to avoid rain water inside from external side and paint touchup including removal of debris up to 50 m 115 m&l for removing of tree routs, shrubs and bushes from wall surface / roof top / chajjas up to 15 m height including repairing of cracks in cement mortor 1:3in crarcked surfaceand making good the surface matching with existing surface including all required ladder and cosider allsaftey measures upto ht 15 mts of bldgetc completed and removal of shrubs up to 50 m distance complete all as specified and directed. 116 removing of old building materials & dabries of any types. the rate included in the tractor trolly ( size 3300mm x 1800mm x 450mm ) i.eloading, unloading and stacking / sprading etc outside of md land with own arrangement by contractor complete all as specified and directed. 117 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 118 s&f steel work in tubular trusses of design as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using erw or induction butt welded tubes confirming to is 116 1979 grade ( medium grade ) complete all as specified and as directed. 119 m&l framed work such as grills in ornamental design as approved , gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe 410 0 or fe 310 0 includingms powder coating togrill / guard bars of approved colors for windows etc complete all as specified and as directed. 120 m & l two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel complete all as specified and as directed. 121 dismantling asbestos cement / frp sheet / gi sheet ( corrugated ted, semi corrugated, etc. ) sheets in roof coverings up to height 10m and taking care of earthing strip and refixing complete all as specified and directed. 122 s&f pre coated galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws on each sheet / each support rubber lining and complete all as specified and as directed. 123 s&f 2mm thick coloured fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed. 124 dismantling wall / ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover complete all as specified and as directed. 125 s&f in repairs 5mm thick acrylic sheet red / blue colour or as approved, size n exc 0.36 sqm ( square / rectrangular ) duly coloured writing ( block / qtr no ) as approved size and thickness and fixing arrengment on wall upto 6mtr height complete all as specified and as directed. 126 m&l for 10 15 mm thick pop false ceiling with approved pattern and design on gi chicken wire mesh of aperture 10 mm anddia of wire 1. mm fixed on frame workpanel size 600 x 600 mm made of gichannel of standard section as approved of thickness not less than 1.25 mm thick including offsets at diifrent level as per designfixed to required geomatric shape at diffrent level fixed in approved design pattern complete with all necessary arrangement and tying with roof member with suspended of 8 mmdia round bar with required fixing arrangements spacing of suspenders shall not be more than 1.0 mtr on either side of each other all as specified and directed. the rate shall be inclusive of making of coves, moldings, offsets, cornices, domes, angular shapes, curves of any shapes, connecting to wall, projectionswith including finishing joint with tape & jointing compound ceiling including two coat of plastic emulsion paint over one coat ofprimer all fixing shall be done as directed. note: ( i ) rate is inclusive of all fittings, fixtures, scaffolding, t&p, safety measures at site. ( ii ) design and pattern as approved by engr in charge. 127 s&f fix in repairsglass mirror of size exc1.0 sqm but n exc 2.0 sqm including ornamnetal edges border on sides of 2 to 3 inch wide and mirrors having pvc / ply wood back of 6 mm thick including all fittings and fixtures required to fixing in ss brackets / studsat allcorners on wallsetc, making holes if required complete all as specified and as directed. 128 demolition of brickwork or stone / boulder masonry, built in cementmortar includin gall quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. 129 m&l brick work with flyash modular bricks, straight or curved on plan exc 6m mean radius, built incm1 : 6 complete all as specified and as directed. 130 s&f in repairs of wooden flooring made of kiln seasoned treated teak wood finished with size 195mm x 8.0mm thick and in random length in tounge and groove shape andcomplete all as specified and as directed.note: make, colour and design of wooden flooring shall be approved by ge...

Nagar Palika Parishad - Uttar Pradesh

35304483 tender for construction work of material recovery facility ( murph ) center in nagar palika parishad sardhana 1 mrf work center 2 excavationinfoundationinordinarysoil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming ofexcavated earthintothetrenchesorintothespace between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineerinchargeuptoadistanceof30 meters from the foundation trenches. 3 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 4 sand filling in plinth under floors nicluding watering ramming consolidating and dressing complete including lead up to 50m and lift up to 1.5 and including cost of sand 5 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatmentjunctionofwallandthefloor7.5 liters / sqm ( 5 ) treatmentofsoilalongexternal perimeterofbuilding 5 liters / sqm ( 6 ) treatment of soil under apron alongexternal perimter 5liters / sqm. ( as per manufacturers standard dilution ) 6 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200.same as above but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 7 same as above but for theslab i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 8 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 9 as in item 6 abovebut incolumn withapproved stone ballast. ( using1:1.5:3mix concrete ) . 10 class m 150 brick work in 1:6 cement fine sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 11 class 150 brick work in 1:6 cementand fine sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 12 class 150 half brick work in 1:4 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 13 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 14 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand. 15 15mm cement plaster in single coat of rough side of single of half brick wall for exterior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm. in girth and finished even and smooth no. extra for mixing any additive. 1 cement : 6 fine sand 16 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 17 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 18 supply and fixing galvanized corrugated iron roofing 24 b.w.g in position including supply of all amterial, labour, tools & plants etc.required for proper complletion of the work and including wastage, 19 providing and fixing 22 b.w.g ridges, vally and gutters for iron roofing fixed with j or u bolts 10mm ( 3 / 8 ) dia with g.i. limpet and bitumen washers complete including supply of all material, labour tools & plants etc required. 20 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 21 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for wooden surface. 22 mild steel or iron work in heavy sizes such as trusses, builts up gates, door, frame, record racksroof work, gates etc.wrought to required form including drilling holes, rivetting or welding where necessary and also including supply of all steel. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. made of g.i. wire of dia 4 mm 24 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. angle iron door chaukhats 40*40*5 25 z section with m.s. grill 26 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 27 ( b ) window chaukhats 28 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 29 supply and fixing of 3.8cm ( 1.1 / 2 ) thick country wood door fully panneled shutter including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolt, locks handles spring or other fittings. ( a ) 38 mm thick including isi marked stainless steel butt hinges with necessary screws single leaf 30 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 31 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : ( a ) 250 mm x 10mm 32 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm 33 finishingwallswithwater proof cement paint of approved make and quality on new work with two coat to given an even shed including supply of all materials, labour, tools & plant etc.required for proper completion of the work 34 supply andfixingof 7.5cm 6kg / per sq.cm internal dia ac / rain water down pipe everest or charminar make complete with bands with door at top plain at bottom and grating and including supply of necessary ms clamps 2.5cmx3mm fixed to wall with and including all complete of all work5 mm diameter 35 add internal electrification works 36 add extra for 6 water taps in washing unit 37 excavationinfoundationinordinarysoil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming ofexcavated earthintothetrenchesorintothespace between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineerinchargeuptoadistanceof30 meters from the foundation trenches. 38 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 39 class m 150 brick work in 1:6 cement fine sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 40 providing and fixing in position chain linked steel wire fabric made of 4mm dia g.i wire of required width in mesh to concrete / wooden / angle iron posts including securing and screwing with 2mm dia g.i wire, g.i staples, g.i.u nails or steel pins etc. complete 41 mild steel or iron work in heavy sizesangle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10mm dia. as per requirement including priming coat with red oxide zinc chromate primer and placing the post / strut in cement concrete block. 42 providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works1:2:4 ( 1 cement:2 coarse sand 4graded stone aggregate 20mm nominal size ) 43 12mm thick cement plaster of mix: in cement mortar 1:6 ( 1 cement :6 fine sand ) 44 finishingwallswithwater proof cement paint of approved make and quality on new work with two coat to given an even shed including supply of all materials, labour, tools & plant etc.required for proper completion of the work 45 excavationinfoundationinordinarysoil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming ofexcavated earthintothetrenchesorintothespace between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineerinchargeuptoadistanceof30 meters from the foundation trenches. 46 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 47 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatmentjunctionofwallandthefloor7.5 liters / sqm ( 5 ) treatmentofsoilalongexternal perimeterofbuilding 5 liters / sqm ( 6 ) treatment of soil under apron alongexternal perimter 5liters / sqm. ( as per manufacturers standard dilution ) 48 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200. 49 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m 200. 50 class m 150 brick work in 1:6 cement fine sand ( of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 51 providing and laying damp proof course 25mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 52 providing & applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 53 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 54 same as in item no. 9 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 55 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 56 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 f.m. 57 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 58 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand 59 supply and fixinmg 6 to 8mm thick ivory or light shades vitrified floor tiles size 600x600 mm ( thickness to be specified by themanufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar1:4 ( 1cement:4coarsesand ) , jointing with grey cement slurry @ 3.3kg / sqm including pointing the joints with white cementandmatchingpigmentetc., complete.. ground floor 60 providing and fixing 6mm thick china glazed tiles of first quality in skirting or dado laid over 12 mm thick bedofcementmortar1:3 ( 1cement:3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in whitecementmixedwithpigmentof matching shade complete. ground floor 61 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 25 mm thick floor ) . 62 supply and fixing of 3.8cm ( 1.1 / 2 ) thick country wood door fully panneled shutter including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolt, locks handles spring or other fittings. 63 m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. providing & fixing of hold fast for chaukhatsof doors and windows. 64 providing & fixing of door / windows grill. 65 z section steel windows ( openable ) 66 angle iron door chaukhats 40*40*5 67 fixing of door, windows / ventilators chaukhats in position. ( a ) door chaukhats 68 ( c ) ventilator chaukhats 69 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. ground floor 70 finishing wall with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials, labour and t & p etc. required for proper completion the work. two coat ground floor 71 white washing two coat including supply of all materials, labour and t & p etc. required for proper completion of the work. 72 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 73 providing and fixing stainless steel handles with screws etc. complete ( a ) 125 mm 74 ( c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineerin charge. 75 providing & fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 76 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 77 same as item 27 above but on new wood surface. 78 providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 79 cost for internal w / s and sanitatio 80 cost for soak pit 81 cost for internal electrification 82 providing, laying, spreading 22.5 53 mmstone ballast with fine sand including supply of all material, labour and t&p etc.required for proper completion of work for interlocking tiles pathway 83 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 84 supply & fixing 80mm thick precast cement concrete ( colour tileswith isi mark ) i shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimention 200x ( 160+120mm ) of op cement smooth high gloss finidh skid reditant manufactured from rubber moulds through vibro compression machanism.the compressive strength of concrete paver block shall not be less than 40mp ( m 30 ) and wight 4.5kg per no confirming to is 15658 2006 with a 4cm thick layer of fine sand including cost of material, labour, t & p taxes etc required for proper completion of the work as directed by engineer in charge 85 external w / s arrangement, t.w. boring of 150mm dia with 100mm dia p.v.c. pipe assembly, 1.5 h.p. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc. 100mm dia pvc pipe of isi mark [ 14 kg pressure ] 86 p / f 2 pvc pipe 87 nylon mesh for filter 88 plastic dori 89 solvent dori 90 4 end cap 91 4 submersible cap 92 2 ms clamp ( heavy ) 93 2 gl elbow. 94 2*6 gi nipple 95 1.5 hp 9 stage submersible pump of isi mark with automatic pannel 96 2.5 sqm. submersible cable. 97 drilling charges for 6 dia tubewell. 98 pea gravel 99 2 ms socket. 100 cartage of material upto site. 101 mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 102 painting one coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 103 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 104 providing and laying of 22.4 53 mm stone layer in base of c. road complete item 105 providing and laying c.c. pavement of mix m 20 with ready mixed concrete in 1:1.5:3from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 106 add cost of external electric connection 107 18% gst 108 add 2% for contengencies...

Rural Engineering Department - Uttar Pradesh

35230768 auction sale of rsi girdar 150x75mm, gi sheet, tarfelt, door/ window shutter 40mm hunk, door/window shutter 35mm hunk, door/window shutter 32mm hunk, door/window shutter 25mm hunk, sitapur plywood shutter, ms iron tor steel bar 16mm, barbed wire, press steel window frame, empty maxphalt, ceiling fan, poly well tanky, empty cement bag, hydraulic lime bag, empty hydraulic lime bag....

Cane Development and Sugar Industry - Uttar Pradesh

34361390 tender for farm machinery work in the pilibhit campus of cooperative sugarcane development society 1 excavation of foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer in charge up to a distance of 30 meters from the foundation trenches. 2 filling of carted earth. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift up to 1.5m and including cost of sand. 4 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 5 as in item 6 but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) ground floor 6 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) ( upto plinth ) 7 as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. ground floor 8 same as in item no. 10 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ground floor 9 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. ground floor 10 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 11 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 ( 1 cement: 4 coarse sand ) 12 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sandground floor 13 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 fine sand ground floor 14 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 15 cement plaster skirting up to 30 cm height, with cement mortar 1:3 ( 1 cement : 3 coarse sand ) , finished with a floating coat of neat cement.18 mm thick ground floor 16 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade :new work ( two or more coats applied @ 1.43 ltr / 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg / 10 sqm ) ground floor 17 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j & n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters including cost of all labour & materials. ground floor 19 applying putty base 20 mild steel or iron work in heavy sizes such astrusses, builtup gate, roof work etc., wrought to required formincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 21 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 22 painting ist coat over priming coat ( butexcluding cost of priming coat ) on steelandothermetalsurfacesup to 10 cm. widthorgirthorsmall articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi glossapcolitesuperlac, dulux specifiedbrushingtogiveanevenshadeandincluding cleaningthe surfaceofalldirt, dust and other foreignmatter sandpaperingand stopingincluding cost ofall materials, labour toolsandplantsetc. required forpropercompletion ofthe work....

Food Corporation Of India - Uttar Pradesh

34136930 annual repair and maintenance of work at fsd naini dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below 2 dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 3 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge.in cement mortar 4 removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m ( stacks of cleaned bricks shall be measured ) : from brick work in cement mortar 5 dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: asbestos cement sheet 6 removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. 7 providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. 8 wall painting with premium acrylic emulsion paint of interior grade, having voc ( volatile organic compound ) content less than 50grams / litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour.two coats 9 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 10 white washing with lime to give an even shade : old work ( two or more coats ) 11 finishing walls with acrylic smooth exterior paint of required shade :new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 12 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer incharge.all kinds of soil 13 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level :1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources ) 14 providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement all work up to plinth level :1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources 15 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 16 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 17 supplying and fixing 3 mm thick translucent white acrylic plastic sheet to suit semi corrugated sheet roofing made from thermo setting polyester resin fiber reinforced as per isi 2866 1989 to suit fully corrugated ac sheet roofing overlapping on corrugation and with light transmission not less than 80 % with two diagonal bracing of ms flats 40x6mm including self tapping screws epdm seal and washer complete as per the direction of engineer in charge but excluding the cost of purlins rafters and trusses 18 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 19 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 20 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 4.0 mm thickness ( weight not less than 10kg / sqm ) 21 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws 22 providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm 23 providing and fixing bright finished brass tower bolts ( barrel type ) with necessary screws etc. complete : 250x10 mm 24 providing and fixing bright finished brass handles with screws etc. complete:125 mm 25 painting with synthetic enamel paint of approved brand and manufacture to give an even shade :two or more coats on new work 26 providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand / make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing p / s trap, complete in all respect as per directions of engineer in charge. 27 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in c.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required : single half stall urinal with 5 litre p.v.c. automatic flushing cistern 28 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge. 29 providing and fixing counter top wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 500x400 mm with a pair of 15 mm c.p. brass pillar taps. 30 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: white glazed fire clay kitchen sink of size 600x450x 250 mm 31 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i / c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes 32 providing and fixing cp brass bib cock of approved quality :15 mm nominal bore 33 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 34 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia 35 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 1500x450 mm 36 providing and fixing ptmt grating of approvdquality and colour .circular type 100 mm nominal dia 37 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.granite stone slab of colour black, cherry / ruby red area of slab upto 0.50 sqm 38 lettering with foame of required colour and shape etc complete over granite / wall as per direction of engineer in charge 39 lettering with brass of required colour and shape etc complete over granite / wall as per direction of engineer in charge 40 reinforced cement concrete work in walls ( any thickness ) , including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing andreinforcement : 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) 41 centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers andcantilevers 42 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 43 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo mechanically treated bars of grade fe 500d or more. 44 centering and shuttering including strutting, propping etc. and removal of form for walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc. 45 providing and laying vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand ) jointing with grey cement slurry @3.3 kg / sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. glazed vitrified tiles matt / antiskid finish of size of tile 600 x 600 mm 46 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 47 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 80 mm thick c.c. paver block of m 30 grade with approved color design and pattern. 48 providing and laying at or near ground level factory made kerb stone of m 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ) , including making drainage opening wherever required complete etc. as per direction of engineer in charge ( length of finished kerb edging shall be measured for payment ) . ( precast c.c. kerb stone shall be approved by engineer in charge ) . 49 credit for old dismanteled windows and doors 50 credit for old iron scrap 51 providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) . 52 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and accessplatform...

Cane Development and Sugar Industry - Uttar Pradesh

33873476 farm machinery work in the pilibhit campus of cooperative sugarcane development society 2 filling of carted earth. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift up to 1.5m and including cost of sand. 4 providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work, in foundation and floors. 5 as in item 6 but for thelighterbeams i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete) ground floor 6 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast.(using1:1.5:3mix concrete) (upto plinth) 7 as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. ground floor 8 same as in item no. 10 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ground floor 9 p/f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. ground floor 10 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 11 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) 12 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sandground floor 13 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 fine sand ground floor 14 cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement (40 mm thick floor). 15 cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick ground floor 16 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade :new work (two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) ground floor 17 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j & n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters including cost of all labour & materials. ground floor 19 applying putty base 20 mild steel or iron work in heavy sizes such astrusses, builtup gate,roof work etc., wrought to required formincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 21 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 22 painting ist coat over priming coat (butexcluding cost of priming coat) on steelandothermetalsurfacesup to 10 cm. widthorgirthorsmall articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3,hi glossapcolitesuperlac,dulux specifiedbrushingtogiveanevenshadeandincluding cleaningthe surfaceofalldirt,dust and other foreignmatter sandpaperingand stopingincluding cost ofall materials, labour toolsandplantsetc. required forpropercompletion ofthe work. 23 add cost of electrical work ...

Cane Development and Sugar Industry - Uttar Pradesh

33873374 work of farm machinery in cooperative sugarcane development society, puranpur 1 excavation of foundation in ordinary soil ( loam clay or sand ) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur plus earth as directed by the engineer in charge up to a distance of 30 meters from the foundation trenches. 2 filling of carted earth. 3 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift up to 1.5m and including cost of sand. 4 providing and laying in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 5 as in item 6 but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) ground floor 6 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) ( upto plinth ) 7 as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. ground floor 8 first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus ) mortar infoundation & plinth including supply of all materials, labour and t & p etc reqiored for proper completion of the work.butin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ground floor 9 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. ground floor 10 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 11 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 ( 1 cement: 4 coarse sand ) 12 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sandground floor 13 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 fine sand ground floor 14 cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12 20mm nominal size laid in one layer neat cement ( 40 mm thick floor ) . 15 cement plaster skirting up to 30 cm height, with cement mortar 1:3 ( 1 cement : 3 coarse sand ) , finished with a floating coat of neat cement.18 mm thick ground floor 16 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade :new work ( two or more coats applied @ 1.43 ltr / 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg / 10 sqm ) ground floor 17 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j & n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters including cost of all labour & materials. ground floor 19 applying putty base 20 mild steel or iron work in heavy sizes such astrusses, builtup gate, roof work etc., wrought to required formincluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.electric resistance or induction butt welded tubes 21 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 22 painting ist coat over priming coat ( butexcluding cost of priming coat ) on steelandothermetalsurfacesup to 10 cm. widthorgirthorsmall articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi glossapcolitesuperlac, dulux specifiedbrushingtogiveanevenshadeandincluding cleaningthe surfaceofalldirt, dust and other foreignmatter sandpaperingand stopingincluding cost ofall materials, labour toolsandplantsetc. required forpropercompletion ofthe work. 23 add cost of electrical work...

Uttar Pradesh Jal Nigam - Uttar Pradesh

32922512 supply of materials for various modification and renovation works under “sugamya bharat abhiyan” at board of revenue, lucknow board of revenue ( remaining items ) board of revenue ( remaining items ) , dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm , 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement: 4 coarse sand ) , dismantling doors and windows, chowkhats with holdfast and including stacking of materials as directed by engineer in charge with in adistance of 60 metre. , dismantling doors and windows leaves and including stacking of dismantled materials as directed by engineer in charge with in adistance of 60 metre. , repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.metersand under, including cutting the patch in proper shape, raking out joints andpreparing and plastering the surface of the walls complete, including disposalof rubbish to the dumping ground, all complete as per direction of engineerin charge. ground floor , 6 mm cement plaster 1:3 ( 1 cement : 3 fine sand ) finished with a floating coat ofneat cement and thick coat of lime wash on top of walls when dry for bearingof r.c.c. slabs and beams ground floor . , making grooves 10 to 12 mm wide x 8mm deep in of the wails or in ceiling vertically or horizontallyas required , providing and laying ceramic glazed floor tiles of size 300x300 mm ( thicknessto be specified by the manufacturer ) of 1st quality conforming to is : 15622 ofapproved make in colours such as white, ivory, grey, fume red brown, laid on20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with greycement slurry @ 3.3 kg / sqm including pointing the joints with white cementand matching pigment etc., complete. , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. , cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stoneaggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. , providing and fixing isi marked flush door shutters conforming to is : 2202 ( parti ) non decorative type, core of block board construction with frame of 1st classhard wood and well matched commercial 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws , providing and fixing m.s. rivets of sizes in position. , providing and fixing of hold fast for chaukhats of door sin addition, windows. , providing of door / windows grill , z section steel windows ( open able ) , angle iron door chaukhats 40x40x5 , fixing of door, window / ventilator chaukhats in position , one priming coat & one coat oil distemper on new work including supply of all materials, labour and t& p etc. required for proper completion of the work.as in item no.649 above but for every coat after the first coat ground floor , finishing walls with premium acrylic smooth exterior paint with siliconeadditives of required shade: new work ( two or more coats applied @ 1.43 ltr / 10 sqm over and includingpriming coat of exterior primer applied @ 2.20 kg / 10 sqm ) ground floor , one priming coat & one coat oil distemper on new work including supply of all materials, labour and t& p etc. required for proper completion of the work.as in item no.649 above but for every coat after the first coat ground floor , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.ground floor , painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t & p etc. required for proper completion of work. paint to be used should confirm to the i.s.i. no. 103 1950.same as in item 641 above but for every coat after 1st coat. details of cost for 650 sft. area , wood surface. , providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes , ramp with slope 1:12 & width of 1.8 m & plinth height of 300 mm from ground level with steel handrails & chequred tiles. , supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. , providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work up to plinth level : 1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) : 8 graded stone aggregate 40 mmnominal size ) , centering and shuttering including strutting, propping etc. and removal of formfor foundations, footings, bases of columns, etc. for mass concrete , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all workup to plinth level : 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mmnominal size ) , brick work with common burnt clay f.p.s. ( non modular ) bricks of classdesignation 7.5 in foundation and plinth in: cement mortar 1:6 ( 1 cement : 6 coarse sand ) b / w in foundation , brick work with common burnt clay f.p.s. ( non modular ) bricks of classdesignation 7.5 in superstructure above plinth level up to floor v level in all shapesand sizes in : cement mortar 1:4 ( 1 cement : 4 coarse sand ) b / w up to plinth lvl. , steel reinforcement for r.c.c. work including straightening, cutting, bending, placingin position and binding all complete upto plinth level. thermo mechanically treated bars of grade fe 500d or more. , cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stoneaggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. , chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cementslurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 10 mm thick bed of cement mortar 1:4 ( 1 cement: 4 coarse sand ) . ordinary cement without any pigment , providing and laying tactile tile ( for vision impaired persons as per standards ) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to is: 15622, of approved make in all colors and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of engineer in charge. , providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . , pathway marking , parking , internal electrical ( toilet ) , internal sanitary ( toilet ) , drinking water ( civil work ) , w / s for drinking water , cost of stainless steel handrail in stairs , cost of stainless steel handrail in corridors , cost of fire extinguisher , corridor marking , cost of reflector and anti skid nosing on staircase , cost of signage and general boards , supply, installation, testing & commissioning of lift ( 13 persons, 884 kg., 2 stops, 2 openings, car size 2000mm wide x 2400mm deep, ) as per specification attached etc. of orient, thyssenkrupp, johnson, otis, concourse or equivalent. , supply and fixing of structuralsteel frame ( such as tees, angles, channels etc ) & outer glazing with acp ( acp covering ) , each additional floor , providing and fixing of water cooler , providing of reception counter , supply and providing of wheel chair for disabled person at each floor , side table 1500*750*750mm with 3 drawer , reception chairs , bench ( stainless steel ) for blind , mess table for disabled , evacuation chairs to be available in every floor...

Indian Army - Uttar Pradesh

32811551 bids are invited for surface , excavation in trenches , cement concrete , bricks work , tmt bars , reinforced cement concrete , rough finished flat surface , formwork , mild steel work , screed bed , machine cut kota stone slab , steel windows with side hung , supply and fixing prepainted galvalume , prepainted galvalume aluminium zinc , mandl for rendering 15mm thick in two layers , preparing new surfaces plastered , m and l for preparation , mandl for15mm thick rendering , providing single filling in floors , hardcore of gauge nexc 63 mm , 75 mm thick cement concrete , sf mild steel framed as in doors or gate of angle , sf mild steel flat iron hold fast , sf mild steel framed work such as grills comma guard , mandl for 3 mm thick sheet glass , sandf 2nd class hard wood plain framed , s and f 100 mm long butt hings medium weight , sandf 300 mm long mild steel sliding door bolts plate , sandf 200 mm long mild steel barrel tower bolt stove , mandl including preparation of new wooden surface, mandl including preparation of surfaces of wood , mandlincluding preparation of steel surface , removing excavatedmaterials nexc 50m , returning comma filling in comma inclspreading , mandl for providing antitermite treatment ,mandlfor providing antitermite treatment , supply onlyintegral water proofing compound , point wiring completefor one light fan , point wiring complete with pvc insulated, sandf switch piano comma flush type single pole , s and fsocket outlet 2 in 1 , mandl ceiling rose 3 terminal , mand ls and f stepped type electronic fan , sandf mcb db spn 4way with 200 amps 240 volts , supply and fixing spn 32amp rating 240v , supply and fixing sp 6 to 32 amp rating240v , supply and fixing led lights fitting , supply and fixexhaust fan , supply and fixing ceiling fan complete withblades , m andl for earthing complete with gi wire 4 mm dia, supply commalaying comma jointing comma testing total quantity : 3153...

Uttar Pradesh Jal Nigam - Uttar Pradesh

32480729 invitation of rates for supply of rates for civil, electrical, sanitory and other materials as per bid document , electrical, sanitory & other material , providing m.s. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 ( 1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size ) as per standard design: with 20x20mm square bar , providing and fixing in position precast rcc manhole cover and frame of required shape and approved quality. m.d. 10 circular shape 500mm internal diameter , boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in is: 2800 ( part i ) , including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, beyond 90 metre & upto 150 metre depth below ground level. drilling of 300mm dia bore hole manually. , supplying, assembling, lowering and fixing in vertical position in bore well unplasticized pvc medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction ofengineer in charge. 150 mm nominal size dia , supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of engineer incharge. , gravel packing in tubewell construction in accordance with is: 4097, including providing gravel fine / medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer in charge. , providing m.s. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 ( 1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size ) as per standard design: with 20x20mm square bar , excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth, pipes 80 mm to 300 mmdiameter , a ) inside size 60x60 cm & 90 cm deep including c.i. cover with frame ( light duty ) total wt. of cover & frame to be not less than 38 kg ( wt. of cover 23 kg & wt. of frame 15 kg. , constructing of r.c.c. surface drain complete as per standard design: , drain 300 wide average.depth 45 cm , drain 450 wide average.depth 60 cm , 0.91 m deep with s.f.r.c. grating and frame ( heavy duty, hd 20 grade designation ) 560 mm internal diameter conforming to is : 12592, total weight of cover and frameto benot less than 182 kg., fixed in cement concrete 1:2:4 ( 1cement : 2 coarse sand : 4 gradded stone aggregate of 20 mm nominal size ) including centering shuttering all complete. ( excavation, footrest and 12 mm thick cement plaster at the external surface shall be paid for separately ) , 40 mm thick rubbed stone flooring over 20 mm ( average ) thick base of cement mortar 1:5 ( 1 cement : 5 coarse sand ) with joints 3 mm thick, side buttered with cement mortar 1:2 ( 1 cement : 2 stone dust ) admixed with pigment to match the shade of stone and pointing with same mortar. red sand stone , providing and stacking of nauclea cadamba ( kadam ) of height 150 165 cm. in big poly bag of size 25 cm as per direction of the officer in charge. , providing and stacking of nyctanthes arbor tristis ( hasingar ) of ht. 90 105 cm in earthen pots of size 20 cm as per direction of the officer in charge. , providing and stacking of terminalia arjuna of height 150 165 cm. in big polybags of size 25 cm as per direction of the officer in charge. , providing and stacking of plumeria alba dwarf dwarf of height 90 105 cm. with 3 4 branches and thick stem in big size hdpe bags as per direction of the officer in charge. , providing and stacking of plumeria rubra of height 120 150 cm. with 3 4 branches and thick stem in big size hdpe bags as per direction of the officer in charge. , providing and stacking of bassia latifolia ( mahua ) of height 90 105 cm. in big polybag of size 25 cm as per direction of the officer in charge. , providing and stacking of eugenia jambolana ( jamun ) of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of psidium guajava ( amrood ) of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of phyllanthus emblica ( amla ) of height 150 165 cm. in big hdpe bag as per direction of the officer in charge. , providing and stacking of mangifera indica ( mango grafted ) of height 60 75 cm. in big poly bag of size 25 cm as per direction of the officer in charge. , providing and stacking of azadirachta indica ( neem ) of height 120 130cm in big polybag of size 25 cm as per direction of the officer in charge. , providing and stacking of ficus racemosa ( goolar ) of height 150 165 cm. in big hdpe bag as per direction of the officer in charge. , providing and stacking of ficus religiosa ( peepal ) of height 150 165 cm. in big poly bags of size 30 cm as per direction of the officer in charge. , providing and stacking of ficus virens ( paakad ) of height 150 165 cm. in big poly bags of size 30 cm as per direction of the officer in charge. , providing and stacking of ficus bengalensis ( bargad ) of height 120 135 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of ficus panda of height 90 105 cm. with 10 12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer in charge.. , providing and stacking of ficus reginald well branched, bushy of height 60 75 cm. in earthen pots of size 25 cm as per direction of the officer in charge.. , providing and stacking of duranta golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of earthen pot / plastic pot & as per direction of the officer in charge.. , providing and stacking of tradescantia zebrina having in 15 cm size of earthen pot / plastic pot & as per direction of the officer in charge. , providing and stacking of wedelia trilobata, full of leaves in 15 cm size of poly bags & as per direction of the officer in charge. , providing and stacking of asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches in 15 cm size of earthen pot / plastic pot & as per direction of the officer in charge.. , providing and stacking of ophiopogon jaburan ( variegated ) , full of variegated leaves in earthen pot / plastic pot of size 20 cm. as per direction of the officer in charge. , providing and displaying of croton petra bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of earthen pot / plastic pot & as per direction of the officer in charge. , making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos m.s. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects including painting inside and outside of tree guard with: two or more coats of synthetic enamel paint of approved quality shade over a priming coat , trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. , supplying and stacking of good earth at site including royalty but including carriage1km ( earth measusred in stacks will be reduced by 20% for payment ) . , supplying and stacking at site dump manure from approved source, including carriage up to 1 km ( manure measured in stacks will be reduced by8% for payment ) , mixing earth and manure in specified proportion or as directed. , rough dressing the trenched ground including breaking the clods. , fine dressing the ground , spreading ofmixed good earth and manure in specified proportions as above and in required thickness. , uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. , providing & laying selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge , preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of officer in charge. , supply , installation , testing and commissioning oftwinkle lites make 3000mm long hybrid decorative pole humberto h pole with gravity casted cast aluminium base and ripped gi pole pipewith decorative post top lantern concord 1270mm long with polycarbonate diffuser in 60w led having lumen output not less than 110lmns / watt with 10kva surge protector designed as per architect in charge ( make twinkle lite / havells / neri / juvaas / orient / thor ) , supply , installation , testing and commissioning oftwinkle lites make gate light lantern concord 1270mm long with polycarbonate diffuser in 60w led having lumen output not less than 110lmns / watt with 10kva surge protector designed as per architect in charge ( make twinkle lite / havells / neri / juvaas / orient / thor ) , supply , installation, testing and commissioning oftwinkle lites make 1000mm longdecorative bracket tlb 69 wl with decorative post top lantern concord 1270mm long with polycarbonate diffuser in 90w led having lumen output not less than 110lmns / watt with 10kva surge protector designed as per architect in charge ( make twinkle lite / havells / neri / juvaas / orient / thor ) , supply and burring of safe earthing electrode t 19, ( hot dip galvanized ) , length up to 3000mrn, outer dia 50 mm inner dia 25mm, terminal dia 12mm, outer gi pipe of 16 swg and inner gi pipe of l2 swg with hot dip galvanization up to 100 micron filled with crystalline conductive mixture ( ccm ) having anti corrosive & conductive property with 50 kgs activated soil ( bfc ) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 20 x 3 c.i. strip, upto switch board ( from apron to switch board, the cost ol g.i. strip will be exrra ) along with 30 cm square c.l. frame with hinged cover & masonry housing. make: as approved in u.p. p.w.d., & c.p.r.i. certified. , supply & laying of 25mm x 3 mm g.i. strip from earth electrode directly in the ground as required complete in all respect. , supply and laying of aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer incharge , complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. , 6.00 sqmm 4 core , 25.00 sqmm 3.5 core , 70.00 sqmm 3.5 core , supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel tpn switch board complete with the following hrc type heavy duty tpn fuse switches with fuses and instrument chamber etc. complete in all respects. the instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. the board shall have suitable capacity electroytic alumininum busbars as per is8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as cmc / dmc support with deteachable side covers and shall be suitable for extension on the sides.the switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. the job includes the grounting of the board as per direction of engineer in charge. all coutgoing switches of 100 amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. the switches board shall be fabricated with crca sheet with a minimum thickness of 1.6 mm / 2 mm. cubicle type switch board shall be of cat a b & b ii and pedestal type for cat b and c only incoming 200 amp. tpn 1 no outgoing 100 amp. tpn 1 no and 63 amp. tpn 3 nos. cat. b. cubicle type , supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect.40 a tpn , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc.conforming to is 14930, part ii complete with fitting and cutting, jointing etc. in the existing trench, complete as required. , 63 mm dia ( od 63 mm & id 51 mm nominal ) , 90 mm dia ( od 90 mm & id 76 mm nominal ) , supply and fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 watt. confirming to ip 66 protection complete in all respect. ( make twinkle lite equvalent in : havells / neri / juvaas / orient / thor ) , supply & fixing of 16 mtr high mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3 mm. top dia minium 150 mm, bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 hp power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. , supply, installation, testing and commissioning of led rgb / rgbw floodlighting luminaire for facade lighting with die cast aluminium housing, powder coated finish, of following wattage. luminaire shall be capable of producing dynamic color changing light for with 16 million colors by dmx / ethernet based control. the beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 270 v ac, 50 hz with power factor > 0.9 . fixture shall be suitable to operate at an ambient temperature range of 10°c to +50°c and shall be ip 65 and ik 06 rated. lifetime shall be at least l70:50000 burning hours at 50°c. luminaire shall be conforming to bis ( is 10322 ) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. ( make twinklelites / neri / thorn / orient electric ) , 30 w , 45 w / 40 w , 130 w , supply, installation, testing and commissioning of led rgb / rgbw linear wall washer luminaire for facade lighting with aluminium extruded housing, of following wattage. luminaire shall be capable of producing dynamic color changing light with 16 million colors by dmx / ethernet based control. the beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 v ac, 50 hz, power factor > 0.9 . fixture shall be suitable to operate at ambient temperature range of 10°c to +50°c and shall be ip 65 and ik06 rated. lifetime should be at least l70:50000 burning hours at 50°c. luminaire shall be conforming to bis and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. ( make twinklelites / neri / thorn / orient electric ) , 25 w , 40 w , providing and fixing of signages, modular curved frame technology, of various widths and lengths, to form suggested usages, made of aluminium extruded sections , duly anodised , all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints, of appropriate size and approved make or equivalent. , providing and fixing of signages, customised to the architects design, the signage to be made of 10 mm casted clear acrylic sheet duly cut by laser, all text to be of 2 mm thick acrylic duly laser cut, partially housed and pasted on to engraved surface of the text in the clear acrylic base, the 10mm acrylic sheet to be fixed on 25x25mm section of teak wood with help of crafted ss pins, and further fixed to the priscribed location with the help of wooden dowels, and required adhesive, as per drawing. , providing and fixing prohibition signage, made of aluminium composite panel, and all text and pictograms as screen printed and malamine coated, all fixtures in 304 grade ss, all design as per architects approval. , providing and fixing of exterior signage, to be fixed on the roof top with the help of ms framework, signage to be made of ms pipe frame work, cladded with 3mm aluminium composite panel, duly cut by cnc router, and the letters to be laser cut, 10mm casted clear acrylic, inserted in a cut out fitted on 4 mm 040 casted acrylic, the letters front to be 3m day and night electrocut vinyl, the signage shall illuminated with back lit led, of phillips / ge make of atleast 5yrs gurantee, ( certificate to be provided, by the makers of led ) , complete in all respects , manufacturing, providing & fixing campus entrance signage as per design approved by architect & drawing enclosed, letters extruded on 50 mm. thick red sand stone dry cladding over brick column with varying perimeter 750x750 size with 150 mm. high sand stone pedestal with foundation ll complete as per the specification & directions of the architect. , manufacturing, providing & fixing directional signage vehicular as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel properly fixed on 6 mm. thick aluminium sheet 900x150 size fixed over 100 150 diameter aluminium dia cast post / ms pole placed over 450 diameter sand stone base 1380 high with foundation all complete as per the specification & directions of the architect. , manufacturing, providing &fixing directional signage pedestrian type a as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel properly fixed on 50 mm. thick red sand stone slab 1200x200 size fixed over 100 150 diameter aluminium dia cast post / ms pole placed over 2 nos. 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. ) , manufacturing, providing & fixing directional signage pedestrian type b as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. aluminium plate in dark green enamel, properly fixed 100 150 diameter aluminium dia cast post / ms pole 2 nos. properly fixed on 50 mm. thick red sand stone ( i ) slab 1200x200 size & ( ii ) slab 900x300 size placed over 2 nos. 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. , manufacturing, providing & fixing directional signage pedestrian type c as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. stainless steel plate in dark enamel properly fixed on 50 mm. thick red sand stone 900x200 size placed over 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. , manufacturing, providing & fixing directional signage pedestrian type c as per design approved by architect & drawing enclosed, letters laser edged on 2 mm. stainless steel plate in dark enamel properly fixed on 50 mm. thick red sand stone 900x200 size placed over 150 diameter sand stone post 3000 high with foundation all complete as per the specification & directions of the architect. , providing & fixing of signages made on aluminium sheet by cnc cutting as per drawing & design architects approval including all necessary t&p etc all complete in direction of engineer in charge . , providing and fixing of ms gate including moulding, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary ms nuts and bolts complete, with suitable arrangement as per approval of engineer in charge, , providing and fixing bolts including nuts and washers complete. , supplying & filling of cinder asper drawing, design etc all complete in direction of engineer in charge. , labour rate forfilling of boulder pitching ( 40 60 kg ) including wire and necessary lead & lift including transportation etc all complete in direction of engineer in charge. , providing and laying at or near ground level factory made kerb stone of m 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ) , including making drainage opening wherever required complete etc. as per direction of engineer in charge ( length of finished kerb edging shall be measured for payment ) . ( precast c.c. kerb stone shall be approved by engineer in charge ) , providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 ( 1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size ) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of engineer in charge. , precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement:4 coarse sand ) : medium shade pigment using 50% white cement and 50% ordinary cement , providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge : flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. , dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with jamuna sand, with common burnt clay non modular bricks. , labour rate for makingfor trimixing on cc road with complete t&p , wiring points for light with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & ceiling rose / angle / batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. , wiring points for fan / fresh air fan ( light duty exhaust fan ) with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. , wiring points for plug with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & socketsheet etc.complete in all respects.as directed including matching colour wash. , supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm fr pvc insulated 1100 v grade single core multistrand copper conductor cable inpvc conduitpipe partly concealed including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i / c. , supply and wiring of submain with two number 4 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in20mm dia heavy duty ( 2mm thick ) pvc conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 sqmm fr pvc multistand copper earth contunity wire including colour wash etc. complete in all respects. , supply and wiring of submain 2 number 6 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in20mm dia heavy duty ( 2mm thick ) pvc conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 sqmm fr pvc multistand copperearth contunity wire including colour wash etc. complete in all respects. , s / f of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16swg ms. sheet incorporating 10mm dia, m.s. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the r.c.c roof before concreting along with supply of all materials, labour. t& petc. required for proper completion of the work. , supply and fixing of flush / surface mounting distribution boardswith additional metal door without mcbcomplete in all respects.6 way tpn , supply and fixing of 6 amp to 32 amp mcb ( 10ka ) c curve, 6 32 amps.cat. a , supply and fixing of 40 / 63 amp mcb ( 10ka ) c curve, 63 amp. 4 pole mcb c curve cat. a , supply and fixing of power plug with 15 amp. / 250 volt flush type universal switch and 5 pin 15 a / 250 vflush type universal socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. , supply and fixing of power plug with 20 amp. / 250 volt flush type universal switch and 5 pin 20 a / 250 vflush type universal socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. , supply & fixing of single wall bracketon matching m.d.f.e.g.boardbase etc. complete in all required. cat. aa , supply and fixing of led tube light batten fitting suitable for up to 1 x 22 watt led tube light on surface complete in all respect. , supply and fixing of led tube light with batten suitable for up to 1x22 watt led tube light complete including tube etc. on surface complete in all respect. , 1 x 22 w cat aaa , 2 x 22 w cat aaa , supply and fixing of recess / surface / pendent mounting round 10 to 15 watt led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set complete in all respect . ( category aaa ) , supply and fixing of recess mounting round 15 to 18 watt led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set complete in all respect. , supply and fixing of 55 watt indoor recess mounting led square fitting for armstrong ceiling having powder coated die cast aluminium housing with body with extended heat sink, diffuser of polycarbonate meterial and driver set complete in all respect. cat aaa , supply &fixingofwater tight oblong 10 watt led bulkhead luminaire with driver set confirming to ip 65 and above protectioncomplete in all respect. , supply of ceilling fans with fan motor of a.c. permanent insulation, capacitor rating conforming bee 5 star rating and is: 374 / 79 abd also comply with is: 1709 / 1984 with latest amendment. the rate voltage 220 / 240 volts, 50hz, 1 ph ac the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. , supplyfixingofelectronic fan regulator ( modular ) 120 280 v. isimarked, on the existing switch board including making connetion, required material, labour t / p etc for proper completion of work to the satisfaction of engineer in charge of work. , supply & erection ofa.c 230 / 250 volts, 50 hz wall mounted fans including providing m.s bolts, mounting frame and other acessories including connections etc.complete as required300mm sweep as per directionof e / i makebajaj, cromption or equivalent. , supply & fixingof sheet steel enclosure surface / flush mounting fitted with 20 / 32 amp. 2pin and earth metal clad scraping earth plug and socket complete in allrespects as per direction and satisfaction of engineer in charge. cat. a , supply and fixing of 63 a 415 v metal clad tpn cfs complete with hrc fuse etc. on angle iron frame complete in all respect . , supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. , supply & fixing of two number 8 swg g.i. wire for earthing purpose as required complete in all respects. , supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to minimum ip:43 degree of protection.the panel sheet structure shall undergo seven tank pre treatment process before painting.the sheet steel shall be all of 2.2mm thick crca sheet.all the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.the panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.the panel shall be provided with minimum 75mm base channel frame fabricated from ismc sections.all bus bar links in the panel shall be solid bus bars with coloured pvc shrinkable sleeves, no wires will be acceptable.continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.the control wiring shall be carried out with minimum 1.5 / 2.5 sqmm copper wires and adequate number of no / nc, potential free contacts incorporated for remote operation of the starters.proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.the panel shall be provided with a thermostatically controlled heating arrangement ( 200 w ) to take care of high humidity conditions.a 5a socket service outlet ( single phase ) shall be provided in one of the compartments as ervice outlet in the panel.panel shall be so designed at to have minimum 20% spare feeders / space.panel shall undergo epoxy powder coated paint, colour as per is:5 requirement.all cable terminations shall be from top.the complete panel shall be fuse less type, for control circuits 2a / 6a mcbs to be used.all bus bars shall be of aluminium, electrolytic grade only.maximum design density shall not exceed 1 amps / sqmm.all bus bars shall be insulated with coloured heat shrinkable pvc sleeved.all bus bar supports shall be non hygroscopic dmc / smc supports. , the panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.the minimum clearances between bus bars shall be as follows : phase to phase minimum 20mmphase to neutral minimum 15mma ) 63 amp tnp 2 nos. , or outgoing as per site requirment , providing & fixing m.s. holder bat clamps of approved design to sand cast iron / centrifugally cast ( spun ) iron s & s pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix ( 1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size ) .including cost of cutting holes & making good the walls etc. , a ) for 100mm dia pipe. , b ) for 75mm dia pipe. , providing & fixingcast iron coller. , a ) 100mm dia. , b ) 75mm dia. , providing & fixing upvc swr bend confirming to is 14735 , 110mm dia , providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. , a ) 100mm , b ) 75mm , providing and fixing centrifugaly cast iron single equal plain junction of required degree. , 100x100x100mm , 75x75x75mm , providing and fixingcast iron terminal guard. , 100 mm , 75 mm , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. , providing &applying high quality acrylic modified resin based texture of dholpur / red sand stone pattern with anti algae and uv resistance properties to be applied as intermediate finish in desired pattern @43.04 kgs / 10 sqm to form film of 1 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with premiumacrylic smooth exterior paint with silicone additives of required shade by two or more coats @ 1.43 litres / 10 sqm, complete as the direction of engineer in charge. , structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete , providing and fixing isi marked m.s. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm , providing and fixing isi marked oxidised m.s. tower bolt black finish, ( barrel type ) with necessary screws etc. complete 200x10 mm , providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete 100 mm , providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , providing and laying pressed clay tiles ( as per approved pattern 20 mm nominal thickness of approved size ) on roofs jointed with cement mortar 1:4 ( 1 cement : 4 coarse sand ) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) and finished neat complete. , wiring point for light with 1.0 sq.mm fr p.v.c. insulated multistrandsingle core copper conductor cable in heavy gauge rigid steel conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 14 s.w.gcopper earth continuity wire&piano typeswitchetc. complete in all respects. , same as in item no. 1 but for fan. and light duty exhaust fan , same as in item no. 1butfor 5ampplug point with piano type switch & socket etc. , add for light / fan points with modular type switches in place of piano type switches , add for plug point with modular switch & socket in place of piano type switch & socket , supply & fixing of power plugwith20amp 250 volts flush type modular switchand 5 pin 20 amp 250 volts flush type universal modular socket on concealed ms box including supply of all material, labour t&p etc. required for proper completion of work , mains & submains supply & wiringofsubmainwithfr p.v.c. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 swgcopperearth continuity wire complete in all respects. , 2 x 4 sq. mm.in 20 mm dia conduit. , 2 x 10 sq. mm.in 25 mm dia conduit. , s / f of surface / flush mounting spn distribution board ( legrand lexic ) without mcb complete in all respects as directed at site by engineer in charge. 12 ways , supply & fixingof 6 / 10 / 16 / 20 / 25 / 32 amp. sp mcb ( 10 ka ) ( legrand lexic ) , s / f of 40 amp dp mcb ( 10 ka ) ( legrand lexic ) , s / f of sheet steelenclosure for dp / tp / fp mcb with neutral link and earth terminal. , supply&burryingof 600mm x 600mm x 6.0mm g.i. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. g.i.pipe and funnelforwatering and one earthing lead ofno. 8swgg.i. wirein 15 mm dia. gi pipe uptoswitch board ( from apron to switch boardthecost of gi pipe & gi wire willbeextra ) 300mm square c.i. box with hinged cover, masonary housing alternate layer of charcoal / coke and salt atleast 150mm thick alround etc. as per the direction of engineer in charge complete in all respect . , supplying & laying of one number 8 swg g. i. wirein 15 mm. dia. g. i.pipefor earthing, laidin groundor inwall duly concealedincludingthecostofcement, sand, labour, t&pandothermaterial required for proper completion ofthework as directed at site. , supply andlayingofisi marked aluminiumconductor pvc / xlpe insulated armoured, served, sheathed cable 1100volts gradeat 750mmbelow ground level overacushion of 75 mm thick sand around & protected with brick onsides & top on surfacethecablerunshallbe fixed on m.s. clamps etc. of suitablesize completeinallrespect. the armouring of the cable shall be properlyconnectedwith the earth conductor by clamps etc. 10 sqmm 2core , supplyfixing of plam orpintypecopper tin plated cable socket ( lug ) tothecable leads, insulating with tapeand making connections etc. complete in all respects as per direction of engineer in charge. 10 sq.mm. , supply andfixing brass nickle plated compression glandsfor pvc insulated armoured, served, sheathed cable including rubber ring etc.completeinallrespect. the armouring of the cable shall be properlyconnectedwith the earth conductor. 10 sqmm 2core , erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. , supply and fixing of 16 gauge ms drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. , supply & fixing of recess / surface / pendent mounting round10 to 15 watt led down lighter having powder coated die cast aluminium housing with heat silk, diffuser / reflector and driver set complete in all respect. , supply & fixing ofled tube light with batten suitable for upto 1x22 watt led tube light fittings including tube on surface complete in all respect cat aaa , supply & fixing of recess / surface mounting round 24 watt to 32 watt led down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / reflector and driver set completed in all respect. , supply, laying, jointing, testing and commissioning ofisi marked ( is : 14930, part 2 ) h.d.p.e. ( dwc ) double wall corrugated pipe for cable layinghaving corrugation on outer wall and plain smooth surface at inner side including transportation upto the site, jointing, providing and fixing all fittings i.e. sockets, couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter depth of suitable width with back filling of soil into trenches tocomplete the works in all respects. ( make : duraline / jain / akg ) 63 mm. id / 78mm od , supply ofac230 / 250 volts, 50 hz fresh airfansincluding providingnuts, bolts, mounting frame and other accessories etc.complete . ( make : bajaj / usha / newtek / havells ) 300 mm sweep , drilling of 200 mm dia bore hole including all necessary t&p etc all complete in direction of engineer in charge. , supply of 125 mm dia mspipe as per is1239including all necessary t&p etc all complete in direction of engineer in charge. , supply of 125 mm dia slotted mspipeincluding all necessary t&p etc all complete in direction of engineer in charge. , supply and fixing of nylon jali around the slotted pipes complete as required including all necessary t&p etc all complete in direction of engineer in charge. , providing and packing of coarse sand / pea gravel around the pipeincluding all necessary t&p etc all complete in direction of engineer in charge. , transport of boring tools other required equipements and installation at site including all necessary t&p etc all complete in direction of engineer in charge. , supply of submersible pump of make ksb ( cora ) for 200 lit / min discharge at 50 meter head with control panel, support wire etc complete including all necessary t&p etc all complete in direction of engineer in charge. , providing 3 core pvc insulated submersible cable. ( from pump panel to submersible pump ) including all necessary t&p etc all complete in direction of engineer in charge. , providing and fixing 65 mm dia. g.i. pipe complete with fittings and clamps including cutting and making good the wall etc. ( from submersible pump to ground level ) including all necessary t&p etc all complete in direction of engineer in charge. , providing and fixing 65 mm dia. brass gate valve with ci wheel of approved qualityincluding all necessary t&p etc all complete in direction of engineer in charge. , lowering of 125 mm dia ms pipe in bore hole including cutting, jointing etc completeincluding all necessary t&p etc all complete in direction of engineer in charge. , supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respectincluding all necessary t&p etc all complete in direction of engineer in charge. , fixing, testing and commissioning for erection and lowering of submersible pump, 65 mm dia gi column pipe, 3 coresubmersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the work. , testing and development of tube wellincluding all necessary t&p etc all complete in direction of engineer in charge. , mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of z section , mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. , mild steel or iron work of small sizes and sections such as trusses built up gates, door frames, record racks , roof work, gates etc etc.wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of grills , providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws , providing and fixing factory made upvc white colour casement / casement cum fixed glazed door comprising of upvc multi chambered frame, sash and mullion ( where ever required ) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to upvc profile ) , upvc extruded glazing beads of appropriate dimension, epdm gasket, zinc alloy ( white powder coated ) 3d hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer in charge. ( single / double glass panes and silicon sealent shall be paid separately ) . note: for upvc frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. three track three panels sliding window with fly proof s.s wire mesh ( two nos. glazed & one no. wire mesh panels ) made of ( big series ) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. ( area of window above 1.75 sqm , providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing epdm gasket, perforated aluminium spacers, desiccants, sealant ( both primary and secondary sealant ) etc. as per specifications, drawings and direction of engineer in charge complete. ( make saint gobain / asahi / modigardian ) , providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer incharge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . , providing and laying integral cement based waterroofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a ) applying a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b ) laying brick bats with mortar using broken bricks / brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed jointless cement mortar of mix 1:4 ( 1 cement :4 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above , providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm , providing and fixing bright finished brass tower bolts ( barrel type ) with necessary screws etc. complete : , ( a ) 250 mm x 10mm , ( a ) 200 mm x 10mm , providing and fixing bright finished brass handles with screws etc. complete:125 mm , providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , add for plaster drip course in plastered surface or moulding to r.c.c. projections. , providing and fixing panic bar / latch ( double point ) fitted with a single body, trim latch & lock on back side of the panic latch of reputed brand and manufacture to be approved by the engineer in charge, all complete. , providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s. sheets and galvanized with zinc coating of 120 gms / sqm ( both side inclusive ) as per is : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c / c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer in charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to is: 2095 ( part i ) : 2011 ( board with bis certification marks ) , providing & fixing armstrong or equivalent vertical linear baffle ceiling made out of aluminum extrusion in aluminum alloy grade 6063. the baffle blade shall be in size of 100x25x3600mmin cherry / red oak finish with spacing of 100mm. the baffle blade shall be suspended using slotted u profile at on center spacing in multiples of 25mm. longer lengths of baffle to be connected by baffle joiner and the ends to be fixed with end caps. installation of u grid: the u profile to be suspended at every 1200mm on centre using 6mm threaded rod from the structural soffit using u profile hanger. u profile splice to be used to join more than one u profiles of length 3.75m. 1st u grid channel must be no more than 400mm from the perimeter. installation of armstrong baffles: locate the slot for baffle hangers in slot of baffle section at 1200mm centres. hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. baffle to be lifted into position and hangers engage over lip of u grid channel. each hanger to be secured into position by inserting the locking clip. baffles blades to be connected at ends with baffle joiner, which are inserted into the top and bottom slots of the , providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to is:3614 ( part ii ) , tested and certified as per laboratory approved by engineer in charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 swg g.i.sheet ( zinc coating not less than 120 gm / m2 ) duly filled fr insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of engineer in charge , providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to steel windows by welding , providing and fixing partition upto ceiling height consisting of g.i. frame and required board, including providing and fixing of frame work made of special section power pressed / roll form g.i. sheet with zinc coating of 120 gms / sqm ( both side inclusive ) , consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. the boards are to be fixed to the frame work with joints staggered to avoid through cracks, m.s. fixing channel of 99 mm width ( 0.9 mm thick having two flanges of 9.5 mm each ) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners ( 25 mm x 25 mm x 0.5 mm ) , joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 66mm overall thickness partition using 8mm thick double skin multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process ( high pressure steam cured ) as per is : 14862 with suitable fibre cement screws , providing and fixing factory made upvc door frame made of upvc extruded sections having an overall dimension as below ( tolerance ±1mm ) , with wall thickness 2.0 mm ( ± 0.2 mm ) , corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. the hinge side vertical of the frames reinforced by galvanized m.s. tube of size 19 x 19 mm and 1mm ( ± 0.1 mm ) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of engineerin charge extruded section profile size 48x40 mm , 24 mm thick factory made pvc door shutters made of styles and rails of a upvc hollow section of size 59x24 mm and wall thickness 2 mm ( ± 0.2 mm ) with inbuilt edging on both sides. the styles and rails mitred and joint at the corners by means of m.s. galvanised / plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. the styles of the shutter reinforced by inserting galvanised m.s. tube of size 20x20 mm and 1 mm ( ± 0.1 mm ) wall thickness. the lock rail made up of h section, a upvc hollow section of size 100x24 mm and 2 mm ( ± 0.2 mm ) wall thickness, fixed to the shutter styles by means of plastic / galvanised m.s. u cleats. the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( ± 0.1 mm ) wall thickness. the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised m.s. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of engineer in charge. ( for w.c. and bathroom door shutter ) , wiring points for light with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & ceiling rose / angle / batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. , wiring points for fan / fresh air fan ( light duty exhaust fan ) with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. , wiring points for plug with 1 sqmm.fr pvc insulated multistrand single core copper condutor cable in pvc conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. fr pvc insulated multistrand copper earth contunity wire, piano type switch & socketsheet etc.complete in all respects.as directed including matching colour wash. , supply & fixing ofbuzzer on polished mdfeg / teak ply board including making connections etc. complete in all respect. , supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm fr pvc insulated 1100 v grade single core multistrand copper conductor cable inpvc conduitpipe partly concealed including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i / c. , supply and wiring of submain with two number 4 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in20mm dia heavy duty ( 2mm thick ) pvc conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 sqmm fr pvc multistand copper earth contunity wire including colour wash etc. complete in all respects. , supply and wiring of submain 2 number 6 sqmm . fr pvc insulated 1100 v grade multistranded single core copper conductor cable in20mm dia heavy duty ( 2mm thick ) pvc conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 sqmm fr pvc multistand copperearth contunity wire including colour wash etc. complete in all respects. , s / f of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16swg ms. sheet incorporating 10mm dia, m.s. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the r.c.c roof before concreting along with supply of all materials, labour. t& petc. required for proper completion of the work. , supply and fixing of flush / surface mounting distribution boardswith additional metal door without mcbcomplete in all respects.6 way tpn , supply and fixing of 6 amp to 32 amp mcb ( 10ka ) c curve 6 32 amps.cat. a , supply and fixing of 40 / 63 amp mcb ( 10ka ) c curve 63 amp. 4 pole mcb c curve cat. a , supply and fixing of power plug with 15 amp. / 250 volt flush type universal switch and 5 pin 15 a / 250 vflush type universal socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. , supply and fixing of power plug with 20 amp. / 250 volt flush type universal switch and 5 pin 20 a / 250 vflush type universal socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. , supply & fixing of single wall bracketon matching m.d.f.e.g.boardbase etc. complete in all required. cat. aa , supply and fixing of led tube light batten fitting suitable for up to 1 x 22 watt led tube light on surface complete in all respect. , supply and fixing of led tube light with batten suitable for up to 1x22 watt led tube light complete including tube etc. on surface complete in all respect. , 1 x 22 w cat aaa , 2 x 22 w cat aaa , supply and fixing of recess / surface / pendent mounting round 10 to 15 watt led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set complete in all respect . ( category aaa ) , supply and fixing of recess mounting round 15 to 18 watt led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set complete in all respect. , supply and fixing of 55 watt indoor recess mounting led square fitting for armstrong ceiling having powder coated die cast aluminium housing with body with extended heat sink, diffuser of polycarbonate meterial and driver set complete in all respect. cat aaa , supply &fixingofwater tight oblong 10 watt led bulkhead luminaire with driver set confirming to ip 65 and above protectioncomplete in all respect. , supply of ceilling fans with fan motor of a.c. permanent insulation, capacitor rating conforming bee 5 star rating and is: 374 / 79 abd also comply with is: 1709 / 1984 with latest amendment. the rate voltage 220 / 240 volts, 50hz, 1 ph ac the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. , supplyfixingofelectronic fan regulator ( modular ) 120 280 v. isimarked, on the existing switch board including making connetion, required material, labour t / p etc for proper completion of work to the satisfaction of engineer in charge of work. , supply & erection ofa.c 230 / 250 volts, 50 hz exhaust fans including providing m.s bolts, mounting frame and other acessories including connections etc.complete as required300mm sweep as per directionof e / i makebajaj, cromption or equivalent. , supply & fixingof sheet steel enclosure surface / flush mounting fitted with 20 / 32 amp. 2pin and earth metal clad scraping earth plug and socket complete in allrespects as per direction and satisfaction of engineer in charge. cat. a , supply and fixing of 63 a 415 v metal clad tpn cfs complete with hrc fuse etc. on angle iron frame complete in all respect . , supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. , supply & fixing of two number 8 swg g.i. wire for earthing purpose as required complete in all respects. , providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. 750 litres capacity , s / f of 100 mm dia g.i pipe b class for cable completed with supports by 3 nos. clamp made for 20x30 mm ms flat and suitable size of nutbolt & washer required for proper completion of worh as per direction of e / i. , supply and laying of aluminium conducter pvc insulated armoured served sheathed cables 1100 volts grate at a depth of below ground lvl overa cusion of 75 mm thick sand alroundand protected with burnt on side and on top , on surface the cable run shallbe fixed on m.s clamps etc. of suitable size or as directed by e / i complete in all respects, the armouring of the cable shall be properly connected with the earth conductor by clamps atc. , ( i ) 10 sq. mm 2core , ( ii ) 16 sq. mm 4 core , ( iii ) 70 sq. mm 3.5 core , ( iv ) 120 sq. mm 3.5 core , supply 7 fixing of plain or pin type copper tin plated cable socket to the cable leads, insulated with tape and making connection etc. complete in all respect as per direction of e / i , ( i ) 10 sq. mm , ( ii ) 16 sq. mm , ( iii ) 35 sq. mm , ( iv ) 70 sq. mm , ( iv ) 120 sq. mm , providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. water closet of size 780x370x690 mm , providing and fixing white vitreous china pedestal type water closet ( european type ) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , providing and fixing water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests , providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: ( a ) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete. , 32 mm dia ( for wash basin ) , 40 mm dia ( for sink and urinal ) , providing & fixing stainless steel aisi 304 ( 18 / 8 ) kitchen sink with drain board as per is :13983 with c.i. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. 510x1040 mm bowl depth 200 mm , providing & fixing 600 x 450 mm bevelled edge mirror of superiorglass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. , providing & fixing viterous china toilet paper holder. , providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial / germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal , providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of engineer in charge and finished smooth. granite stone of approved shade , providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite of any colour and shade area of slab over 0.50 sqm , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms , providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , providing and fixing ptmt grating of approved quality and colour. circular type:125 mm nominal dia with 25 mm waste hole , providing & fixing soil, waste and vent pipes. , a ) 100mm dia centrifugally cast iron s & s pipe. , b ) 75mm dia centrifugally cast iron s & s pipe. , providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters. , 100 mm , 75 mm , providing & fixing m.s. holder bat clamps of approved design to sand cast iron / centrifugally cast ( spun ) iron s & s pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix ( 1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size ) .including cost of cutting holes & making good the walls etc. , a ) for 100mm dia pipe. , b ) for 75mm dia pipe. , providing & fixingcast iron coller. , a ) 100mm dia. , b ) 75mm dia. , providing & fixing upvc swr bend confirming to is 14735 , 110mm dia , providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. , a ) 100mm , b ) 75mm , providing and fixing centrifugaly cast iron single equal plain junction of required degree. , 100x100x100mm , 75x75x75mm , providing and fixingcast iron terminal guard. , 100 mm , 75 mm , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. , providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . internal work exposed on wall , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. ( internal work ) exposed on wall , a ) 15mm dia nominal outer dia pipes , a ) 20mm dia nominal outer dia pipes , providing & fixing gun metal gate valve with c.i. wheel of approvedquality ( screwed end ) , 25 mm nominal bore , 32 mm nominal bore , providing and fixing ballvalve ( brass ) of approved quality complete. ( high or low pressure with plastic floats ) . 25 mm nominal bore , providing&fixing15 mm nominal bore45 cm long unplasticised pvc connection pipewith brass unions. , providing & fixing 15 mm nominal bore cp brass bib cockof approved quality conformingtois 8931. , providing and fixing 15 mm nominal bore c.p brass long nose bib cock of approved qualityconforming to is standardsandweighing notlessthan 810 gms. , providing & fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points of approved quality conformingto is8931. , excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a ) pipes 80mm to 300mm diameter. , providing, laying and joining glazed stone ware pipes grade awith stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete.150mm diameter , providing & laying cement concrete 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround s.w. pipes including bed concrete as per standard design. 150mm diameter , constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :4 coarse sand ) rcc top slab with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) , foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size ) finished with a floating coat of neat cement complete as per standard design inside size 90x80cms and 45cms deep including ci cover with frame ( light duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15kg ) . with fps bricks of class designation 75 , ( i ) for sewer line , extra for depth of man hole size 90x80 cm , providing and fixing square mouths. w. gully trapgrade `a complete with c.i. gratingbrickmasonry chamber with f.p.s bricks and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 180 x 150 mm. size p type , providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per is : 10910 on 12mm dia steel bar conforming to is: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturess permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size ) complete as per design. , providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws , providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade ( yield strength 480 n / mm2 ) , counter sunk head, comprising of 10 mm dia polyamide pa 6 grade sleeve, including drilling of hole in frame , concrete / masonry, etc. as per direction of engineer in charge. , frame anchor hrd c 10x140 , frame anchor hrd c 10x120 , frame anchor hrd c 10x120 , providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , kota stone slab flooring over 20 mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) : 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average ) thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. , providing and laying integral cement based waterroofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a ) applying a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b ) laying brick bats with mortar using broken bricks / brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed jointless cement mortar of mix 1:4 ( 1 cement :4 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above , providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm , providing and fixing bright finished brass tower bolts ( barrel type ) with necessary screws etc. complete : , ( a ) 250 mm x 10mm , ( a ) 200 mm x 10mm , providing and fixing bright finished brass handles with screws etc. complete:125 mm , providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , supplying & intallation of tesnsile fabric canopy make serge ferrari / mehlar including all necessary t&p etc all complete in direction of engineer in charge. , providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: ( a ) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete. , 32 mm dia ( for wash basin ) , 40 mm dia ( for sink and urinal ) , providing & fixing stainless steel aisi 304 ( 18 / 8 ) kitchen sink with drain board as per is :13983 with c.i. bracketsandstainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. 510x1040 mm bowl depth 200 mm , providing & fixing 600 x 450 mm bevelled edge mirror of superiorglass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. , providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size ) as per direction of engineer in charge and finished smooth. granite stone of approved shade , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws withconcealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms , providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , providing and fixing ptmt grating of approved quality and colour. circular type:125 mm nominal dia with 25 mm waste hole , providing & fixing soil, waste and vent pipes. , a ) 100mm dia centrifugally cast iron s & s pipe. , b ) 75mm dia centrifugally cast iron s & s pipe. , providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters. , 100 mm , 75 mm , providing & fixing m.s. holder bat clamps of approved design to sand cast iron / centrifugally cast ( spun ) iron s & s pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix ( 1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size ) .including cost of cutting holes & making good the walls etc. , a ) for 100mm dia pipe. , b ) for 75mm dia pipe. , providing & fixingcast iron coller. , a ) 100mm dia. , b ) 75mm dia. , providing & fixing upvc swr bend confirming to is 14735, 110mm dia , providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. , a ) 100mm , b ) 75mm , providing and fixing centrifugaly cast iron single equal plain junction of required degree. , 100x100x100mm , 75x75x75mm , providing and fixingcast iron terminal guard. , 100 mm , 75 mm , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. , providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . internal work exposed on wall , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. ( internal work ) i ) exposed on wall , a ) 15mm dia nominal outer dia pipes , a ) 20mm dia nominal outer dia pipes , providing & fixing gun metal gate valve with c.i. wheel of approvedquality ( screwed end ) , 25 mm nominal bore , 32 mm nominal bore , providing and fixing ballvalve ( brass ) of approved quality complete. ( high or low pressure with plastic floats ) . 25 mm nominal bore , providing&fixing15 mm nominal bore45 cm long unplasticised pvc connection pipewith brass unions. , providing & fixing 15 mm nominal bore cp brass bib cockof approved quality conformingtois 8931. , providing and fixing 15 mm nominal bore c.p brass long nose bib cock of approved qualityconforming to is standardsandweighing notlessthan 810 gms. , providing & fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points of approved quality conformingto is8931. , providing and placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. 750 litres capacity , excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.a ) pipes 80mm to 300mm diameter. , providing, laying and joining glazed stone ware pipes grade awith stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete. 150mm diameter , providing & laying cement concrete 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround s.w. pipes including bed concrete as per standard design. 150mm diameter , constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :4 coarse sand ) rcc top slab with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) , foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size ) finished with a floating coat of neat cement complete as per standard design . inside size 90x80cms and 45cms deep including ci cover with frame ( light duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15kg ) . with fps bricks of class designation 75 , ( i ) for sewer line , extra for depth of man hole size 90x80 cm , providing and fixing square mouths. w. gully trapgrade `a complete with c.i. gratingbrickmasonry chamber with f.p.s bricks and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 4.50 k.g and frame to be not less than 2.70 kg as per standard design. 180 x 150 mm. size p type , providing & fixing of 50 mm thick grc jali including grout in brick wall as per drawing & design and approval of architect in charge. , poster frame ( f 1 ) size=0.45x0.55mt. providing teak wood frame around the poster with 6mmcommercial ply i.s. 5509 ( greenply / century, ) back, frame shall be pu polished and 6mm thick glass as cover with patch fittings etc all complete in direction of architect in charge. refer drg , frame ( f 2 ) size=0.24x0.34mt. providing teak wood frame around the poster with 6mmcommercial ply i.s. 5509 ( greenply / century, ) back, frame shall be pu polished and 6mm thick glass as cover with patch fittings etc all complete in direction of architect in charge. refer drg , false ceiling providing & fixing of armstrong false ceiling make armstrong sound scape hexagon shape traffic white scrim with embedded frames 1200x1200x 30mm including frame &panel etc all complete in direction of engineer in charge. , providing & fixing of armstrong false ceiling silhouette including frame & panel etc all complete in direction of engineer in charge. , gypsum partition providing and laying gypsum panel partitions 100 mm thick with water proof gypsum panels of size 666x500x100 mm, made of calcite phosphor gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor v level. gypsum blocks will have a minimum compressive strength of 9.3 kg / cm2 ( dsr 6.40 ) , suppying testing & commissioning of water coolar with water storage tank capcity 50 litre per hour including stabilizer with stand and water suuply pipe & copper cabling & drain pipe etc all complete in direction of engineer in charge. ( make blue star / eurekforbes ) , reception table with18 mm thick ply with veneer top of size 1.00 mtr x0.600 mtr the edge finish with corner bevelled as per the design specified in the drawing planks fixed on the frame of 18 mm thick ply also providing 3 nos. sliding storage shelf made with commercial ply i.s. 5509 ( greenply / century, ) of 12mm thick planks design as per drawing, shelf track of 25mm thick ply . &legs made in teak wood height 0.75 mtr size varying as per design. smooth edge finished all including moulding & carving as described in the drawing and pu polishedetc all complete in direction of architect in charge. , reception chair medium back rest chair without arm, back rest finish all in teak wood, chair have all finished in teak wood as per drawing . high quality linen fabric at least 800.00 rs. per rmt with cushion on both seat and back. legs all made in teak wood all edge smooth finished. all include moulding, carving and beadings as per design and pu polished etc all complete in direction of architect in charge. ( size=0.45x0.45x.045mt. ) , table lockertable with 18mm thickcommercial ply i.s. 5509 ( greenply / century, ) of size 2.10 mtr x0.60 mtr the edge finish with corner bevelled as per the design specified in the drawing planks fixed on the frame of 130x45mm thick teak wood also providing 10 nos. sliding storage shelf ( 325x450mm ) in two layers made with teak wood of 19mm thick planks design as per drawing, shelf track of 15mm thick teak wood . &legs made in teak wood height 1.00 mtr size30x45xmmvarying as per design. smooth edge finished all including moulding & carving & necessary fittings handle & locks etc, as described in the drawing. , size=1x0.45x1.5mt. almira as per drawing with 4mm veneerover 19 mm ply water proof plywood ( conforming to international formaldehyde emission standards ) and teak wood beading finished edgesandinner surface finished with 4mm veneeras / shade approved by the architect / in charge. the shuttershall be of teak woodwith glass / teakwood panel as per drawings. the almira shall be pu polished etc all complete in direction of architect in charge. , size=0.6x0.6x0.45mt. teak wood batten planter with 3mm brass metal case to hold clay pot and planter, planter shall be pu polished etc all complete in direction of architect in charge. refer drg , size=1.65x0.8x0.45mt. teak wood batten planter with 3mm brass metal case to hold clay pot and plantershall be pu polished etc all complete in direction of architect in charge. refer drg , size=3.00x0.75x1.35 mt. providing teakwood framing on the edge of shelf with shutter panels with glass. providing fittings ( dorma or equvellantglass to glass hinges 2 nos. 180*, door knob 1 no., glass to glass connector 180* 4 nos., glass to glass connector 90* 20 nos., glass to wall connector 90* 12 nos, 12mm thick toughened glass with silicone including installation etc all complete in direction of architect in charge. , providing and fixing of 8mm thick sun board panel, using 8 mmcommercial ply i.s. 5509 ( greenply / century, ) as base with teak beading on edge as per drawing. the display material has to be printed on vinyl film lg / garware / 3m film and pasted on the glass. etc all complete in direction of architect in charge. ref. drg. , providing and fixing of 12 mm thick toughened glass panel of specified size using hardware fittings namely steel studs as per drawing. the display material has to be printed on lg / garware / 3m film and pasted on the glass.etc all complete in direction of architect in charge. ref. drg. , size=3.0x0.75x1.35mt. tableas per drawing teak wooden plank tableand teak beading finished edges. providing fittings ( dorma or equvellant ) glass to glass hinges 2 nos. 180*, door knob 1 no., glass to glass connector 180* 4 nos., glass to glass connector 90* 20 nos., glass to wall connector 90* 12 nos, 12mm thick toughened glass with silicone including installation etc all complete in direction of architect in charge.refer drg. , size=3.3x0.6x1.52mt. diorama display boxteak wooden frameand teak beading finished edges. including providing & fixing of6mm glass on 1 side for display including patch fittings etc all complete in direction of architect in charge.. refer drg. , supply and fixing of gazeebo ( 3.50 mtr dia ) octagonal shape and 3.0 mtr height and tata blue scope roof with frame as per drawing including grouting of cast iron column in r.c.c block ( size 450mmx450mmx450mm ) and gazebo floor vitrified tile and cast iron railing 900 mm high with painting and entry in one side and including one coat primer & painting, polishing including all necessary t& p etc. all complete in direction of engineer in charge. , providing & fixingof sand stone single piece slab ornamental benches size 1500x500 mm and height 400 mm of approved design pattern ( shape ) and specifications includingcement concrete1 :2 :4 grouting, all materials, labor and t & p etc. required for proper completion of work as directed by architect in charge. , providing & fixingofmild steel benches size 1500x500 mm and height 400 mm of approved design andspecifications with paining polidhingincludingcement concrete1 :2 :4 grouting, all materials, labor and t & p etc. required for proper completion of work as directed by architect in charge. , fabrication and supply & fixing of stainless steel grade, sheet thickness = 1.2 mm, double dustin situable for air port, park, metor stations etc.with civil work including all necessary t&p etc all complete in direction of engineer in charge. ( model no. ozuf db bo lid, make ozone / jindal / j.c.decaux or equivalent ) , suppying testing & commissioning of water coolar with water storage tank capcity 50 litre per hour including stabilizer with stand and water suuply pipe & copper cabling & drain pipe etc all complete in direction of engineer in charge. ( make blue star / eurekforbes ) , suppying testing & commissioning of split a.c. 1.5 tonne including indoor & outdoor unitincluding stabilizer with stand & copper cabling & drain pipe etc all complete in direction of engineer in charge. ( make daikin / hitachi / o genral ) , supplying and fixing of duplex maps d03 outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of four seater arc swing outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of multi seater see saw outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of cystal maze outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of turbo tower outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing ofcurve loop climber outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of balancing bridge ( model no pgth 03 ) outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying and fixing of four seater mgr outdoor playing equipment ( make arihant / kompain ) including necessaryfittings, t&p etc all complete in direction of engineer in charge. , supplying & laying of sand mixed gravels including all necessary lead & lift with compaction etc all complete in direction of engineer in charge. , supplying & laying of graced stone chips ( 22 4 53 gauge stone ) including all necessary lead & lift with compaction etc all complete in direction of engineer in charge. , supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. the draining three dimensional core will have a “w” configuration as longitudinal parallel channels. minimum thickness to be 7.2mm, with two filtering uv stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm charecteristic opening size ( o90 ) of 110 micron and tensile strength of 8.0 kn / m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 l / ( m.s ) at hydraulic gradient of 1.0 & 20 kpa pressure and tensile strength of 18 kn / m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of engineer in charge. , supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to minimum ip:43 degree of protection.the panel sheet structure shall undergo seven tank pre treatment process before painting.the sheet steel shall be all of 2.2mm thick crca sheet.all the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers.the panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm.the panel shall be provided with minimum 75mm base channel frame fabricated from ismc sections.all bus bar links in the panel shall be solid bus bars with coloured pvc shrinkable sleeves, no wires will be acceptable.continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places.the control wiring shall be carried out with minimum 1.5 / 2.5 sqmm copper wires and adequate number of no / nc, potential free contacts incorporated for remote operation of the starters.proper sized cable termination gland plates shall be provided oncable alleys and knockouts for same shall be provided during fabrication stage itself.the panel shall be provided with a thermostatically controlled heating arrangement ( 200 w ) to take care of high humidity conditions.a 5a socket service outlet ( single phase ) shall be provided in one of the compartments as ervice outlet in the panel.panel shall be so designed at to have minimum 20% spare feeders / space.panel shall undergo epoxy powder coated paint, colour as per is:5 requirement.all cable terminations shall be from top.the complete panel shall be fuse less type, for control circuits 2a / 6a mcbs to be used. all bus bars shall be of aluminium, electrolytic grade only.maximum design density shall not exceed 1 amps / sqmm.all bus bars shall be insulated with coloured heat shrinkable pvc sleeved.all bus bar supports shall be non hygroscopic dmc / smc supports. the panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. the minimum clearances between bus bars shall be as follows : phase to phase minimum 20mm, phase to neutral minimum 15mm, , sub panel incoming :one ( 1 ) no 200a 4 pole mccb, metering : one ( 1 ) no. ( 0 500v ) 96 x 96 sqmm voltmeter with control fuse & selector switch, one ( 1 ) no. ( 0 200a ) 96 x 96 sqmm ct operated ammeter with selector switch, cts etc., one ( 1 ) set of phase indication lamp., bus bar : one ( 1 ) no.200 a, tpn aluminimum bus bar of suitable length.outgoing :phase indication lamps on each outgoing to be provided., 100amps tpn 2 nos , or outgoing as per site requirment, , incoming :one ( 1 ) no 315a 4 pole mccb, metering :one ( 1 ) no. ( 0 500v ) 96 x 96 sqmm voltmeter with control fuse & selector switch., one ( 1 ) no. ( 0 315a ) 96 x 96 sqmm ct operated ammeter with selector switch, cts etc., one ( 1 ) set of phase indication lamp., bus bar :one ( 1 ) no.315 a, tpn aluminimum bus bar of suitable length., outgoing :phase indication lamps on each outgoing to be provided.100amps tpn 3 nos , or outgoing as per site requirment...

Military Engineer Services - Uttar Pradesh

31643262 repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

31162190 repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

30617825 repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur. repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

30617807 repair, replacement of joinery, steel window, ventilators, pvc doors glass panes wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony, under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

30247800 name of work: addn / altn of lgs stores at 7 afh kanpur cantt 1.00 taking down chowkhats with shutters ( without taking off shutters from the frame ) area not exc 1.5 sqm each complete all as specified & directed. 2.00 taking down chowkhats with shutters ( without taking off shutters from the frame ) area exc. 1.5 sqm and not exc 4.0 sqm each complete all as specified & directed. 3.00 taking down shutter of any description exc 1.00 sqm and not exc. 2.00 sqm each complete all as specified & directed. 4.00 m&l for brick work with sub class ‘b’ bricks ( with old size bricks ) , straight or curved on plan exc. 6.0 mtr mean radius, built in cement mortar 1:6, complete all as specified & directed. 5.00 taking down cement plaster, any description on brick walls or on concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc., and removing same from the site ( s ) , complete all as specified & directed. 6.00 m&l for 15 mm thick rendering in cm ( 1:6 ) on fair / other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed. 7.00 m&l for 10 mm thick rendering in cm ( 1:3 ) on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. 8.00 m&l for 15mm thick rendering in cm ( 1:4 ) on fair faces of brick / concrete finished even and fair without using extra cement including necessary padding, steel scaffolding and shuttering for working platform etc complete all as specified & directed. 9.00 s&f steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified & directed. 10.00 all as per item no 09 above but without glazing bars complete all as specified & directed. 11.00 s&f mild steel guard bars for window conforming to fe 290 gde e 165 fixed in repair complete all as specified & directed. 12.00 s&f steel ventilator with top hung shutter including hinges steel peg stay including taking down old steel ventilator complete all as specified & directed. 13.00 s&f second class hard wood ( sal or bejasal ) as in framed work clean sawn using sal wood as in scantling complete all as specified and directed. 14.00 s&f 35 mm thick flush shutter, solid core constructions with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 15.00 s&f 35 mm thick iind class hard wood, glazed and skelton door shutter, factory made ( fully glazed, open rebated, and prepared to receive glass, gauge etc ( with sash bars ) edges of framing plain, chamfered sash bar, or rounded, fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in ssr part i section 8, clause 8.20 ( a ) complete all as specified and directed. 16.00 supply and fixing 100 mm butt hinges stainless steel complete all as specified and directed. 17.00 s&f of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 18.00 s&f of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 19.00 s&f of 200 mm long barrel tower bolt aluminium anodised of extruded section complete all as specified and directed. 20.00 supply and fixed in repair of 125 mm aluminium anodised barrel tower bolt complete all as specified and directed . 21.00 supply and fixed in repair of 125 mm size aluminium handle fabricated type anodised complete all as specified and directed. 22.00 supply and fixing galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm fixed with wooden beads to wooden joinery complete all as specified and directed. 23.00 supply and fixing, in repairs galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm and fixed with wooden beads to wooden joinery complete all as specified and directed. 24.00 supply only 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads area not exc. 0.5 sqm in each pane all as specified and directed. 25.00 s & f 3mm thick sheet glass ordinary quality glazing with oil putty or wooden beads area not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified & directed. 26.00 s&f 300 mm ordinary rat tail pattern springs including rod roller and with roller plate complete all as specified & directed. ( make: ritz or equvalent as approved by ge ) . 27.00 m&l for plain cement concrete ( 1:2:4 ) type b 1 ( using 20 mm graded stone aggregate ) for fixing holdfast and coping including all necessary form work complete all as specified and directed. 28.00 m&l for cement concrete type b 0 ( 1:2:4 ) ( using 12.5 mm graded stone aggregate ) as in padding, roof kerb incl hunching, benching etc complete all as specified and directed. 29.00 m&l 75 mm thick pcc ( 1:3:6 ) type c2 ( using 40 mm graded stone aggregate ) as in plinth protection and paving laid in alternate bays finished finish even and smooth without using extra cement including mastic filling in joints complete all as specified and directed. 30.00 m&l factory polished vitrified ceramic tiles light shade in colour 10 mm thick ( square / rectangular ) area of each tiles not exceeding 0.36 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cement mortar 1:6 for receiving finish complete all as specified and directed. 31.00 m&l factory polished vitrified ceramic tiles light shade in colour 10 mm thick ( square / rectangular ) area of each tiles not exceeding 0.36 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting including 10 mm thick rendering in cm ( 1:4 ) complete all as specified and directed. 32.00 m&l glazed ceramic coloured tiles size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointing in white over 10 mm rendering on fair faces of wall 1:4 cement complete all as specified and directed. 33.00 m&l for 18 20 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps jambs, pillars, window cills cooking platforms and like in cement mortal ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 34.00 dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the premises complete all as specified and directed. 35.00 s&f steel water tubing 15mm dia ( bore ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation with fittings and connections, etc., complete all as specified & directed. 36.00 s&f steel water tubing 20 mm dia ( bore ) , galvanised, ‘medium grade’ with all fittings, fixed on walls, ceiling or laid in floors or any other situation with fittings and connections, etc., complete all as specified & directed. 37.00 m &. l for cutting chases for concealed water tubing and making good in cm ( 1:3 ) , cutting not exc 10 cm girth in brick wall complete all as specified and directed. 38.00 s&f 500 ltr rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted including 20 mm dia float valve complete all as specified & directed. 39.00 supply and fixing gun metal globe or gate valves with iron wheel head screwed both ends for 20 mm bore dia iron pipe and fixed complete all as specified and directed. 40.00 s & f vitreous china wash hand basin, white flat / angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of brackets and 75 mm long and 32 mm bore pvc waste pipe and 32 mm brass cp waste coupling complete all as specified and directed. 41.00 s&f tubular towel rail 20mm dia d type 60cm long between flanges brass cp complete all as specified and directed. 42.00 s&f 600x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass, screw and cup washers complete all as specified and directed. 43.00 supply and fixing pvc connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe complete all as specified and directed. 44.00 s&f in repair 15 mm bore angle cock, cast copper alloy chromium plated, screwed down, high pressure, with capstan screwed both ends for iron pipe or for unions complete all as specified and directed. 45.00 supply and fixing 15 mm dia bib tap fancy type cp cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. 46.00 m&l for machine pressed precast concrete interlocking paver block 80 mm thick having lacquer finish any shape and size confirming to is 15658 2006, m 35 with grey cement and pigment complete all as specified and directed. 47.00 m&l sand filling under floors or in foundation including watering, ramming and consolidation complete all as specified and directed. 48.00 m&l for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and leveled in layers not exceeding 15 cm watered and rammed to a true surface complete all as specified and directed. 49.00 m&l for pcc ( 1:4:8 ) type d2 ( using 40 mm graded stone aggregates ) as in foundation filling and mass concrete complete all as specified and directed 50.00 s&f cast iron soil waste & vent pipe in any length with or without ears, with cement joints 75 mm bore laid in floor / trenches all as specified & directed. 51.00 s&f cast iron bend 75 nm bore ( any radius ) diminishing pieces or tapers larger bore measured complete all as specified and directed. 52.00 s&f cast iron floor trap 75 mm dia with cp grating including jointing to waste pipe fixed in cement concrete pcc 1:2:4 type b1 complete all as specified and directed. 53.00 demolition of reinforced cement concrete of roofs, floors ( other than ground floors ) beams staircases landing chajjas and similar suspended work etc complete all as specified and directed. 54.00 use & waste form work to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja, landings and similar work exc 200mm thick complete all as specified and directed. 55.00 m&l for mild steel deformed tmt bars 8mm dia and over ( as in reinforcement ) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and directed. 56.00 m&l for rcc ( 1:1.5 :3 ) type a 2 ( using 20mm graded stone aggregate ) as in beam, lintels, columns / pillars and chajja etc similar work, complete all as specified and directed. 57.00 m&l for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 58.00 m / l for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 59.00 m&l for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 60.00 m&l for preparation of old steel or iron surface of any description exceeding 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. 61.00 m&l preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. 62.00 complete removal of existing treatment i.e. white wash, colour wash , distempering etc. of wall complete all as specified and directed. 63.00 m & l for old surface applying two coat of cement base paint over a coat of primer complete all as specified and directed. 64.00 m&l for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. 65.00 m&l for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. 66.00 m&l for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed. 67.00 m&l for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. 68.00 s& f 1.25 mm steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete in all respect as per the direction of engineer in charge. 69.00 dismantling structural steel work including doors, gates, cattle trap but excluding framed truss etc complete all as specified and directed. 70.00 taking down / removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including pee tiles, screed bed, racking out joints, hacking for key scrubbing down with water etc, and removing rubbish to out of mod land complete all specified and as directed. 71.00 m&l for providing and applying fiber reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflective index ( sri ) of 105 manufactured by asian paints ltd or equivalent as approved by ge on top of concrete roof in three coats @ 10.76 litre10sqm.one coat of self priming of elastomeric waterproofing liquid ( dilution with water in the ratio of 31 ) and two coat of undiluted elastomeric waterproofing liquid ( dry film thickness of complete allocation / system not less than 500 microns ) . the operation shall be carried out after scraping and properly cleaning loose particles with wire brushes, complete in all respect as per direction of brushes, complete in all respect as per the direction of engineer in charge. ( note : treatment shall be done through authorised representative of manufacturer ) . 72.00 m & l for screed bed 10 mm thick ( average ) plaster on concrete surfaces in cm ( 1:3 ) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed. 73.00 m&l pre machine cut, factory polished, kota stone slab flooring 20 25mm thick laid over and including 20mm thick screed bed or bedding layer in cm ( 1:4 ) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing etc complete all as specified and directed. 74.00 all as per item no 73 above but 20 25 mm thick kota stone, factory polished, pre machine, cut slab as in skirting over and including 10mm thick rendering in cm ( 1:3 ) complete all as specified and directed. 75.00 m&l for 25 mm thick plain cement concrete 1:2:4, type b 0 ( using 12.5 mm graded stone aggregate ) as in floors, laid in alternate bays, surface finished even and smooth using extra cement complete all as specified and directed. 76.00 demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 77.00 m&l for 100 mm thick cement concrete type b 2, ( 1:2:4 ) ( using 40mm graded stone aggregate ) as in floors, laid in alternate bays, surface finished even and smooth using extra cement complete all as specified and directed. 78.00 m&l moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k manufactured by m / s asian paints ltd in two coats @ 1.4 kg / m2 to build 1 mm thickness as per manufactures specifications. the first coat shall be applied @ 0.7 kg / sqm and while 1st coat is still green the second coat shall be applied with a suitable and stiff brush @ 0.7kg / sqm . the treatment shall be carried out to entire horizontal surface and upto the height of tiles level on vertical walls, subsequently curing to be done on the vertical and ponding for 48 hours on the horizontal surface according to the good practice complete all as specified and directed. 79.00 m&l 16 mm thick of size 600x600 mm mineral fibre false ceiling system of pattern classic lite rh 99 ( beveled regular ) of armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre powder coated capping, main runner and cross runner and to comprise main tee / runner 15mm x 38 mm size ( load carrying capacity 14 kg / sqm ) spaced at 1200 mm centre securely fixed to the structural soffit and flush fitting 1200 rnm long cross tee / runner to be interlocked between main runners at 600 mm centre to centre from 1200x 600 mm module, cut sub cross tee / runner 600mm require independent support. wall angle of size 19mm x 19mm, secured to the periphery of the wall at 450 mm maximum centres. the above grid is suspended at every 1200 mrn centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook clip complete all as specified and directed. 80.00 taking down carefully point wiring from existing place ( light / fan, socket or power points complete ) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , mcb db’s , mcb, main switches, call bell etc and making good to disturbed surface to wall , floor etc to match with existing surface either by using same colour distemper or white colour wash all as required complete all as specified & directed. 81.00 taking down care fully by unscrewing from boards / out let boxes , fittings and fixtures such as tube light fitting / of any type / / mcb db etc complete all as specified and directed. ( note : this item to be operated only when item found serviceable for re use in work complete all as specified and directed ) . 82.00 m&l point wiring for one light / fan point controlled by one way switch pvc frls insulated and unsheathed copper stranded conductor cable of size 1.5 sq mm , 1100 v drawn in and including pvc casing and capping complete including cast iron / pressed steel terminal box 1.6 mm thick of required size bakelite sheet 3mm thick for mounting switch , socket brass screws and washer including pvc insulated and unsheathed solid copper wire of size 1.5 sqmm will be used as continuous earth wire complete all as specified and directed. 83.00 all as per item no. 82 above but one 5 / 6 amp socket on the same board with other switch 84.00 all as per item no. 82 above but one 5 / 6 amp socket on independent board. 85.00 all as per item no. 82 above but one 3 pin 15 amp socket independent but with 2.5 sqmm pvc insulated unsheathed copper stranded conductor and earth wire with 1.5 sqmm 86.00 s & f in replacement switch piano type 240 v, 5 amp , sp one way flush type complete all as specified & directed. 87.00 s&f socket outlet 2 in 1, 3 pin 5 amps complete all as specified & directed. 88.00 s & f in replacement bell push 240 v, 5 amp , sp one way flush type complete all as specified & directed 89.00 s&f in replacement of socket out let combination multipurpose 3 pin 5 amp, 240 volt and with 2 pin 5 amp out let also flush type including for existing points also ( non shuttered ) complete all as specified & directed. 90.00 s&f in replacement of switch socket outlet combination 3 pin 15 amp, 3 pin 5 amp out let also flush type ( non shuttered ) including for existing points complete all as specified & directed. 91.00 s&f in replacement ceiling rose surface bakelite, 65 x 20 mm three terminal complete all as specified & directed. 92.00 s&f in replacement sheet metal enclosures for mcb distribution board tpn, 4 way double door type including with mccb 4 pole, 100 amps, 16 ka fixed type as incomer with 200 amp rated bus bar complete all as specified & directed. 93.00 s&f sheet metal enclosures for mcb distribution board spn 8 way double door type with 200 amp rated bus bar and suitable for spn isolator as incomer complete all as specified & directed. 94.00 s&f sheet metal enclosures for mcb distribution board spn 4 way double door type with 200 amp rated bus bar and suitable for spn isolator as incomer complete all as specified and directed. 95.00 s&f mcb, tpn , 63 amp 4 pole isolator, 415 volt complete all as specified in existing db, s in replacement complete all as specified & directed. 96.00 s&f in replacement mcb sp upto 30 amp , 240 volt complete all as specified & directed. 97.00 s&f in replacement mcb, spn , 20 to40 amp , 240 volt complete all as specified & directed. 98.00 s&f replacement regulator electronic step up type 240 volt single phase suitable for ceiling fan complete all as specified & directed. 99.00 m& l for earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.50 mtr below normal ground level connected to galvanized earth lead strip 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate no.5 connected to earthing test point all as specified or indicated including testing on completion including pcc pit in ( 1:3:6 ) type c 2 cement concrete .rcc 1:2:4 mix type b reinforced with 6mm dia ms bars @ 150mm rcc cover slab 40mm thick with two no’s fitting handle, gi pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade gi pipe for earth strip 4 mm protection etc complete all as specified & directed. 100.00 s&f for sub main wiring with two runs of single core 4 sqmm ( nominal area ) pvc insulated and unsheathed multi stranded copper conductor cable lt 1100 grade frls cable drawn and pvc rigid conduit 20 mm dia with all necessary fittings and accessories and run of pvc insulated and unsheathed single core cable with copper conductor of size 2.5 sqmm as earth wire ( green in colour ) run through pvc rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. ( note. two run of cable and one run of pvc conduit and one run of earth continuity wire shall be measured as one rm ) . 101.00 s&f for sub main wiring with two runs of single core 6 sqmm ( nominal area ) pvc insulated and unsheathed multi stranded copper conductor cable lt 1100 grade frls cable drawn and pvc rigid conduit 20 mm dia with all necessary fittings and accessories and run of pvc insulated and unsheathed single core cable with copper conductor of size 4.0 sqmm as earth wire ( green in colour ) run through pvc rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. ( note. two run of cable and one run of pvc conduit and one run of earth continuity wire shall be measured as one rm ) . 102.00 s&f cirrus mini pro led surface mounting luminaire with dimension of 312mm x 312mm suitable for porch all as specified and directed. ( make : crompton greaves / philips / havells ) . 103.00 s&f in replacement of fluorescent tube light fitting complete powder coated crca steel sheet housing t 8 led integrated with opal diffuser, led driver of constant current output, operating range 170 275 volt and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 sqmm and pvc connector etc including provision of hanging and wall mounting complete all as specified and directed. ( make : crompton greaves / philips / havells 104.00 m&l for replacement of existing unserviceable recessed mounted luminaire with energy efficient 36 watt led type including making connection to ceiling rose with copper flexible wire of size 23 / 0076 all as specified and directed. make : crompton greaves / philips / havells 105.00 s&f ceiling fan 1400 mm sweep, 5 star rated , 230 volts 50 watt, confirming is 374:1979 copper winding, double ball bearing, down rod and canopy along with regulator etc including suitable pvc 3 core 1.5 sqmm wire from making good the disturbed surface along with testing complete all as specified & directed. make: crompton / usha / bajaj / havells / polar or as approved by ge. 106.00 supply & fix exhaust fans, heavy duty, metallic body ac single phase 230 / 240 v of size 380 mm sweep with louver including making circular holes including making good the disturbed surface all as specified and directed. ( make : crompton greaves / bajaj / khaitan / usha ) . 107.00 supply & fix exhaust fans, heavy duty, metallic body ac single phase 230 / 240 v of size 450 mm sweep with louver including making circular holes including making good the disturbed surface all as specified and directed. ( make : crompton greaves / bajaj / khaitan / usha ) . 108.00 m&l chemical earthing complete with copper plate electrode of size 900mm x 600mm x 5 mm thick buried directly in ground with top edge of the plate not less than 4.5m deep below normal gl connected to copper strip 32x6mm as main earthing lead and connected and tinted copper bolts, nuts, check nuts & washers besides brazing at all joints all as directed and connected to earth test point all as specified and directed on completion with and including excavation and earth work, returning filling , removal of surplus soil etc. and filling with adequate quantity of charcoal dust ( minimum 250 kg ) , salt crystal ( minimum 200 kg ) and mgso4 crystal ( minimum 100 kg ) , pcc work ( 1:3:6 ) type c 1 using 20mm graded stone aggregate for earth pit chamber with 40 x40x6mm mild steel angle iron frame for cover , precast rcc cover ( 1:2:4 ) type b 1 using 20mm graded stone aggregate 50 mm thick, reinforced with 8 mm dia tmt bars @ 75mm c / c on both way with funnel with wire mesh and 40 mm dia light grade for earth lead protection pipe and watering pipe of size 20 mm dia light grade and testing , commissioning complete all as specified and directed.note: ( i ) all joints including electrode to strip and strip to strip will be done only by copper welding / brazing. excavation earth work and all connected items shall be deemed included in quoted unit rate. ( ii ) copper earth strip and gi protection pipe 40mm dia beyond 7.5m long shall be measured and paid separately. 109.00 material and labour for lightening protection system 107 mtrs radius maximum height of the lighting protection not less than 5 mtr made of aluminium and outer surface coated with ss and streamer emission 60m incl suitable strip all as specified and directed...

Military Engineer Services - Uttar Pradesh

30209371 certain sanctioned work under age br i ge faizabad certain sanctioned work under age br i ge faizabad 1 dismantling floor, hearth or wall tiling including cm bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises , complete all as specified. 2 taking down chowkats or framesnexc1.5 sqm each ( without taking off shutters from the frames ) , complete all as specified. 3 taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc., complete all as specified. 4 m&l non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick screed bed in cm 1:6 , complete all as specified. 5 m&l glazed ceramic coloured tiles in vertical surface 350x250x 7 mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchwith the shade of tiles and including 10mm thick rendering in cm 1:3 to receive wall tiles , complete all as specified. 6 demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar, complete all as specified. 7 m & l 5mm thick rendering on fair faces of brick work or concrete surface in cm 1:3 as in ceiling to be finished even and smooth with out using extra cement, complete all as specified.. 8 m & l 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth withoutusing extra cement , complete all as specified.. 9 cutting chasesin brick walls , pinning in, making good to facings where required and pointing in cm 1 : 3 to ends, or edges of landings steps, cills, and cutting chases for concealed water tubing or conduit wiring etc and making good cutting n exc 10 cm girth , complete all as specified. 10 m&l for form work to sides and soffit of floor or roof beam, beam haunchings, girders, bressummers lintels, cantilevers, shelves including supports, overhangings etc., also splays between floor and beam as in fair finished, complete all as specified. 11 s & ftmt steelbars 6 to 8 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including ms wire annealed not less than 0.9 mm dia , complete all as specified. 12 m & lrcc 1 : 2 : 4 type b1 ( 20 mm graded crushed stone aggregate ) as in slabs supported on walls beam and colums in floors, roofs, landings, deck slabs and shelves and the like , complete all as specified. ( formwork and reinforcement shal be measured and paid separately ) 13 m&lfor 20mm thick machine cut granite stone, in skirting / dado laid over cement screed and jointed with gray cement slurry and pointed white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 15mm thick screed bed in cm 1:6 , complete all as specified. 14 rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations , complete all as specified. 15 s&f wash hand basin of size 61x46x15mm and including sensor pillar tap and bottle trap complete all as specified .cat no : 91043 & cat no f240005cp or equivalent as approved by ge / 16 s&f10mm thick frosted toughened glass door swing type with 300 mm wide stainless steel handle andincluding floor spring and locking arrangement and necessary fittings, complete all as specified. 17 s&f ewc 500x360x300mm wall mounted water closet and including seat cover white and necessary fitting connection to trap etc., , complete all as specified. 18 s&f concealed neo flush tank 80mm full frame and accessories connetion to iron pipe, complete all as specified. 19 s&f ceramic urinal pot of size 37x39x61cm with with inbiult sensor type connection to iron pipe and waste pipe, complete all as specified. cat no : 60018 or quivalent as approved by ge. 20 s&f rectangular shaped urinal partition with forsted glass partition for urinal of 8mm thickof size 900x450mm and necessary cleats for fixing the glass, complete all as specified. 21 s & f aluminium door in lieu of wooden or steel door / window / ventilator, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc completerubber beading and handles including connected items with and including, making goodfor dismantling portion in pcc1:2:4 or cm 1:3 , complete all as specified.note : ( i ) minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. 22 s & f aluminium window / ventilator in lieu of wooden or steel window / ventilator, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, star lock, hooks & eyes peg stays, rubber beading and handles including connected items with and including, making goodfor dismantling portion in pcc 1:2:4 or cm 1:3 complete all as specified and directed.note : ( i ) minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. 23 s & f sheet glass frosted of ordinary quality 3mm thick in panesnexc 0.5 sqm in each pane, complete all as specified. 24 s&f looking mirror of size 1000x600mm and including stainless steel nut & bolts wirh rubber washer , complete all as specified. 25 s&f towel rail 600mm long chorium plated , complete all as specified. make :cat nof450024cp or equivalent as approved by ge. 26 s&f towel ring chorium plated, complete all as specified.make :cat no f450023cp or equivalent as approved by ge. 27 s&f rain shower rose cp 200mm square rubbit cleaning system , complete all as specified. make :cat no f160041cp or equivalent as approved by ge. 28 s & f 75 mm bore, pvc ( swr ) single socketed rain water pipe in any length with rubber ring joints fixed to walls , complete all as specified. 29 m&l 75mm bore pvc ( swr ) floor trap , plain with grating including jointing with solvent cement , complete all as specified. 30 s& f bib tap two in one chorium plated , complete all as specified.make :cat no f160041cpor equivalent as approved by ge. 31 s& f angle cock chorium plated , complete all as specified.make :cat no f280004cp or equivalent as approved by ge. 32 s&f glass corner with chrome finish shelf of size 9 inch x 9 inch for bathroom , complete all as specified. 33 m & l2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified. 34 s & f 30 mm thickflush shutters, solid core construction, with block board core and plywood face panels, commericial type on both sides with decorative faces venner with lipping / frame to match , complete all as specified. 35 s & f 100mm long butt hings cast brass mild steel hinge pin, bright polished and fixed type b 11 medium weight & fixed to chowkats, complete all as specified. 36 s&f 150mm long brass handles, fabricated type polished bright , complete all as specified. 37 s&f 200mm long brass barrel tower bolt, but with extruded section polished bright, complete all as specified. 38 s&f mortice lock vertical type size 100mm brass 2 levers , complete all as specified. 39 m&l for interior wall texture paint match to wall and including making smooth finish , complete all as specified. 40 s&f wall mixer cpfancy type connection to iron pipe , complete all as specified. 41 s & f soap dish cp fancy type with brass screws , complete all as specified. 42 m & l for preparing newly plastered surfaces of ceiling and two coats of oil bound distemper ( smooth finish ) , complete all as specified. 43 m & l preparation of old decorated surfaces of walls including complete removal of existing treatment and applying two coats ofdistemper oil emulsionover 1mm thick wallcare putty complete as specified and directed. 44 m & l for bees wax on previously polished surfaces of any description width or girth including cleaning and preparing the surface , complete all as specified. 45 m&l for preparingold steel surface exc 10 cm in width or girth and applying one coats of synthetic enamel paint, complete all as specified. 46 m & l preparation of old wooden surfacesof any description , not other wise described, over 10cm width or girth including and applyingone coat of synthetic enamel paint, complete all as specified. 47 m & l preparing old decorated surfaces of ceilings and applying two coats of white wash, complete all as specified. 48 s & f steel windows with side hung shutters including projecting hinges with steel handle and steel peg stay, complete with glazing bars, both with and without sash bars dovetailed or welded including painting with one shop coat of zinc chromate primer, complete all as specified. 49 s & f sheet glass of ordinary quality 3.00 mm thick in panesnexc 0.5 sqm in each pane, complete all as specified. 50 s & f anodised aluminium door shutters, swing type aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc , complete all as specified. 51 s&f double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed , complete all as specified. 52 s&f 500 litres capacity rotational moulded polythene water storage tanks ( cylindrical vertical, with closed top ) , hoisted and fixed in position as specified in ssr part i and directed and including taking down old and kept in store , complete all as specified. 53 s&f 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified. 54 s&f 20mm bore ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. ( min weight 15mm 142 gms / 20mm 210 gmsfixed to iron pipe , complete all as specified. 55 taking up or down steel tubing and connections, including cleaning for re fixing or removal to store 20 mm bore, complete all as specified. 56 taking up or down steel tubing and connections, including cleaning for re fixing or removal to store 15 mm bore, complete all as specified. 57 s & f 20 mm bore gi tubing medium grade with all fittings and fixed complete to walls or laid in floors, complete all as specified. 58 s & f 15 mm bore gi tubing medium grade with all fittings and fixed complete to walls or laid in floors, complete all as specified. 59 s & f sheet glass tinted of ordinary quality 5.00 mm thick or suitable for aluminium glass shutter in panesexc 0.5 sqm in each pane, complete all as specified. 60 complete removal of existing water proofing treatment upto concrete surface of roof slab of any description and of any thickness including removal of water tanks and replacing in same position, cleaning, wire brushing, watering, removal of debris all as specified and directed. ( a ) 10mm thick screed bed in cm 1: 4 with wpc. ( b ) m&l for applying primer @ 0.50 kg / sqm on prepared surface confirming to is 3384 1965. ( c ) a layer of hot blown bitumen grade 85 / 25 as per is 702 1988 @ 1.2 kg / sqm will be applied over primer. ( d ) laying of app membrane polymeric water proofing membrane 3mm thick and weight not less then 3kg / sqm with non woven polyster reinforcement andbonded completely to the substrate & the overlaps are then scale / fused by flame as per manufacture instruction and laying procudere. the minimum overlaps of 100mm shall be allowed at the ends and sides of strips polymeric membrane. ( e ) applying a layer of blown garde bitumen 85 / 25 @ 1.2 kg / sqm and blinding material such as sand in dry condition @ 0.5 to 1.0 kg / sqm shall be dusted over the bitumen ( f ) toping will be done with pcc tiles 25mm thick laid over 15mm screed bedding in layer of cm 1:4 and jointed & pointed in cm 1:4 linseed oil @ 5% by weight of cement shall be mixed with cm for screed and pointing to the brick tiles. after laying the curing shall be cured with water ponding complete all as specified and directed. 61 surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil and loose soil , complete all as specified. 62 m & l 75 mm thick pcc 1:4:8 type d 2 ( 40 mm gradedcrushed stone aggregate ) as in sub base to floors, complete all as specified. 63 m & l 75 mm thick, plain cement concrete1:3:6, type c 2 ( using 40mm graded crushed stone aggregate ) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement, complete all as specified. 64 m & l sand filling under floors or in foundations including watering and consolidation, complete all as specified. 65 m & l machine pressed precast coloured concrete interlocking paver block rubber moulded any shape and size of 60mm thickness, m 35 grade conforming to is 15658 2006 with grey cement and pigment , complete all as specified. 66 m & lbrick work with sub class b bricks straight or curved on plan exc 6 m mean radius built incm1 : 6 , complete all as specified. 67 s & ftmt steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including ms wire annealed not less than 0.9 mm dia , complete all as specified. 68 m & l pcc 1 : 3 : 6type c 1 ( 20 mm graded crushed stone aggregate ) in lintel upto 1.5m clear span, cill, steps, seismic and other similiar bands, plinth courses, string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating , complete all as specified. 69 taking downcarefully aluminiumpointwiring1.5sq mmof complete, switch socket 5amps& power point etc including switches andmakinggooddisturedsurfacesofwalls / ceilingetc , complete all as specified. 70 m & l point wiring for one light point / fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, frlspvc insulated unsheathed cable in and including 20 mm dia or higer size pvc concealed conduit and fittings with 1.5 sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including metal flush boxes with white cover plate andmaking neccessory electrical connection of modular type switches, sockets, regulators etc , complete all as specified. for one light pointor fanpointcontrolled by one switch . 71 all as per item no. 70 but for one 3 pinsocketoutlet5 ampson same board with other switches 72 all as per item no. 70 but for one 3 pinsocketoutlet5 amps socket outletindependent but belowthe switch board of light pointin the same vertical plane 73 m & l for point wiring with 2.5 sqmm ( nominal cross sectional area ) fr pvc insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non metallic rigid pvc conduit / pvc casing caping of adequate size with all fittings and accessories including pvc sunk box with 3mm thick plastic laminated sheet top cover complete including fr pvc insulated & unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dollyfor one 16 amp socket outlet on independent board. 74 s & f switch piano flush type one way 6 amps , complete all as specified. 75 s&f switch piano, flush type, one way, 16 amps , complete all as specified. 76 s & f socket outlet 5 pin, 6 amp flush type, complete all as specified. 77 s&f socket2 in 1, 3 pin, 5 and 16 amps flush type , complete all as specified. 78 s & f ceiling rose surface bakelite three terminals , complete all as specified. 79 s&f led tube light fitting, 1x20 watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 sqmm from ceiling rose to tube light fitting , complete all as specified. 80 s&f led tube light fitting, 1x10 watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 sqmm from ceiling rose to tube light fitting , complete all as specified. 81 supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50 hz, rpm 1200, copper winding of sweep 300mm , complete all as specified. 82 s&f epoxy powder coated mcb, db, double door spn 4 way for mcbs with common bus bar at incoming end of outgoing mcbs grouted / flush to wall , complete all as specified. 83 m & l mcb spn 32 amps c series , 240 volts , complete all as specified. 84 m & l mcbsp 32 amps c series , 240 volts, complete all as specified. 85 s&f led spot light with a focused 36 degree beam angle 7 w, round, 3000k including provn of twin core multi stranded copper cable of size 1.5 sqmm from ceiling rose to tube light fitting , complete all as specified. 86 excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out / laying of cables and getting out in soft / loose soil , complete all as specified. 87 returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil, complete all as specified. 88 removing excavated materials ( soil ) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point , complete all as specified. 89 m & l for sand cushioning to underground cable with clean dry river sand complete all as specified . note: punned thickness only shall be measured & paid. 90 supply & laying of sub class bbricks locally available best quality laid flat ( length of bricks laid across the length of cable ) in tranches for protection of u / g cable , complete all as specified. 91 supply, laying and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified. 92 supply, testing and fixing of new flood light luminaires led type with c clamps mounting and lm6 pressure die cast housing with high efficiency glass cover system, ip 66, power 120 watts and making necessary electrical connection with suitable size pvc insulated copper multi stranded 1100 volts grade cable with suitable size lugs etc , complete all as specified. 93 m&l earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground ( earth pit ) not less than 2.25 meters deep below gl with top edge of earth plate not less than 1.50 m below ground level, connected to gilead wire of 4 mm dia. ( 7.50 m long ) by means of nuts, bolts and washers, check nuts of gi and protected by the gi pipe light grade 1.5 mm nominal bore ( 7.50 m long ) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick ci funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, pcc 1:2:4 type b1 earth pit and precast rcc cover 50 mm thick dully reinforced with 6 mmdia, ms round bars @ 100 mm c / c both ways, earth testing point, making good to floor complete all as specified....

Military Engineer Services - Uttar Pradesh

30209219 repair, replacement of joinery, steel window, ventilators, pvc doors glass panes wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony, under ge ( i ) r and d kanpur....

Military Engineer Services - Uttar Pradesh

30054227 repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur. repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur....

Directorate General Defence Estates - Uttar Pradesh

29916887 repair / maintenance of cantt fund building ( phase ii ) 1 demolition of r.b. work built in cement mortar. ( si 21008 ) 2 demolition of rcc work as in lintels, beans, slabs etc. ( si 210018 ) 3 taking down cement plaster from walls or ceiling surfaces including tiles etc. and complete as specified. ( si 14041 ) 4 demolition of cement concrete as in floors or in paving etc. ( si 21015 ) 5 removal of dervish spoil, soil or demolished material to a distance 250 mt to 2.00 km. ( si 03033 ) 6 excavation of foundation trenches nexc 1.5m wide and nexc 1.5m depth and getting out in soft and loose soil. ( si 03006 ) 7 m & l for cement concrete type e 2 ( 1:5:10 ) with 40 mm graded brick aggregate as in foundations, sub bases or sub floors. ( si 04014+04025 ) 8 m & l for brick work with sub class ‘b’ bricks built in 1:6 cement mortar in sub structure and super structure. ( si 05004 ) 9 all as item above but brick work built in 1:4 cement mortar. ( si 05004 ) 10 m & l for brick work with sub class ‘b’ bricks built in 1:4 cement mortar in half brick thick walls. ( si 05005 ) 11 m & l for 40 mm thick damp proof course with type bo ( 1:2:4 ) cement concrete. ( si 05040 ) 12 all as item above but 25 mm thick. ( si 05040 ) 13 m & l for rcc work as in lintels, beams, columns, pillars etc with type b 1 ( 1:2:4 ) cement concrete. ( si 04043, 04044 ) 14 m & l for rcc work as in floor slabs, roof slabs, sunshades, chajjas, shelf, shelves, fins, facias etc. with type b 1 ( 1:2:4 ) cement concrete. ( si 04041 ) 15 providing form work to sides, soffits, edges of lintels, bearms, columns, pillars etc. rough finished and flat surfaces. ( si 07010, 07014 ) 16 all as items above but to floor slabs, roof slabs, chajjas, shelf, shelves, tins or facias etc. ( si 07006, 07013 ) 17 s / f of mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia 18 ditto, but 6mm to 8mm dia. 19 rendering 12mm thick to walls 1:6 cement mortar surface finished even and smooth. ( si 14007 ) 20 all as item above but 1:4 cement mortar. ( si 14007 ) 21 rendering 15mm thick to brick or concrete surfaces in 1:4 cement mortar surface finished ever and fair. ( si 14001, 14004 ) 22 rendering 5mm thick to ceiling 1:4 cement mortar surface finished even and smooth. ( si 14001, 14004 ) 23 applying finishing coat 3mm thick over cement plaster surfaces with neat cement slarry for smooth finished. ( si 14011 ) 24 s / f of mild steel work as in door frames or chowkats incl. hold fasts with mild steel sections complete as specified. ( si 10048 ) 25 s / f of mild steel work as in framing of door shutter ( covering of door shutters ) excluding steel sheeting with mild steel sections complete as specified. ( si 10048 ) 26 s / f of plain, mild steel black sheet 20 gauge in hearths, covering to door shutters and like complete as specified. ( si 10030 ) 27 s / f of welded steel wire fabric weight nexc 4kg per sqm and fitted to steel or wood member complete as specified. ( si 10053 ) 28 supply and fixing of galvanized mild steel wire cloth ( power loom ) 0.63mm nomind dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples. ( si 09157 ) 29 s / f of mild steel work such as grills or railing or gratings etc. with mild steel sections complete as specified. ( si 10007 ) 30 s / f of plain, solid, straight chowkats snd frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints in sal wood. ( si 08001 ) 31 s / f of 32mm thick flush shutters, solid core construction with block board ( isi ) and plywood face panels commercial type on both side. ( si 08022 ) 32 s / f of 35mm thick glazed and skelton shutters open rebated and prepared to received glass or gauge in sheesham wood complete as specified. ( si 08007 ) 33 s / f of 40mm thick plain, framed, paneled shutters ( any number of panels ) with panels of timber flat on both side in sheesham wood and complete as specified. ( si 08015 ) 34 s / f of steel windows or ventilators, fixed type with glazing bars. ( si 10070 ) 35 s / f of steel ventilators with top hung shutters including hinges, steel peg stay complete as specified. ( si 10075 ) 36 s / f of steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded. ( si 10071 ) 37 m & l for 25mm thick cement concrete type b 1 ( 1:2:4 ) as infloors, surface finished even and smooth w / o using extra cement. ( si 13036 ) 38 all as item above but 40mm thick floors. ( si 13036 ) 39 add to item no.37 or 38 if surface finished even and smooth using extra cement. ( si 13040 ) 40 m & l for 40mm thick fine dressed sand stone slabs in flooring over and including 15 to 25mm thick screed bed in 1:4 cement mortar, rubbing and polishing complete. ( si 13003 ) 41 all as item no. 42 but on vertical surfaces. ( si 13004 ) 42 m & l for 25 30mm thick machine cut kota stone slab flooring over and including 15 to 25mm thick screed bed in 1:4 cement mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achive mirror finish. ( si 13013 ) 43 m & l for 20 25mm thick white marble stone large slabs in floors, skirtings, cooking, plateforms, shelfs etc. over and including 15 to 25mm thick screed bed in 1:4 cement mortar, jointed and pointed in 1:2 cement mortar ( using white cement, marble dust ) rubbing and polishing complete as specified. ( si 06117 ) 44 all as item above but green, black or red granite stone slabs. ( si 06122 ) 45 m & l for 300mm x 300mm 6 to 7 min thick non skid white or coloured ceremic tiles in floors etc. over and including 15mm thick screed bed in 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. ( si 13082, 13087 ) 46 m & l for 600mm x 600mm, 6 to 7 min thick non skid white or coloured ceremic tiles in floors etc. over and including 15mm thick screed bed in 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. ( si 13086 ) 47 m & l for 300 x 450mm x 5 to 6mm thick glazed ceramic white or colored tiles in vertical surfaces like, skirtings, dados, risers or walls over and including 12mm thick screed bed in 1:4 cement mortar, set and jointed neat cement slurry and pointed in white or coloured cement to match. ( si 13080 ) 48 s / f of 35mm thick precast cement concrete louvers or jallies with type b o ( 1:2:4 ) cement concrete and set in 1:4 cement mortar. ( si 04034 ) 49 m & l for cement concrete with type b 1 ( 1:2:4 ) as in misc. work such as copings, groutings etc. ( si 04029 ) 50 s / f of mild steel barrel tower bolts chromium plated gp make with bright bolts. 50.01 100mm long 50.02 150mm long 50.03 200mm long 50.04 300mm long 51 s / f of aluminium anodised barrel tower bolts of extruded sections. ( si 09004 ) 51.01 100mm long 51.02 150mm long 51.03 200mm long 51.04 300mm long 52 s / f of mild steel sliding door bolts plate type chromium plated gp make complete as specified. ( si 09017 ) 52.01 250mm long 52.02 300mm long 52.03 350mm long 53 s / f of aluminium alloy anodised sliding door bolts plate type complete as specified. ( si 09019 ) 53.01 250mm long 53.02 300mm long 53.03 350mm long 54 s / f of butt hings heavy weight cold rolled mild steel complete as specified. ( si 09027 ) 54.01 75mm long 54.02 100mm long 54.03 125mm long 54.05 150mm long 55 s / f of mild steel chromium plated door handles gp make. ( si 09080 ) 55.01 100mm size 55.02 125mm size 55.03 150mm size 56 s / f of aluminum ( die cast ) door closer hydraulically regulated designation no. 3 universal type suitable for door shutter of 851 to 100mm in width and of weight between 61 to 80 kg. ( si 09154 ) 57 s / f of floor door stopper of aluminum alloy body and tounge anodized with hard drawn steel spring fixed in floors 150mm long plate. ( si 09149 ) 58 s / f of mild steel fan boxes ( weight 300gm to 500gm ) for ceiling fans. 59 s / f of mild steel work as vertical posts, rafters, purloins, cleats etc. in roofing with mild steel sections complete as specified. ( si 10040 ) 60 s& f of pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified 61 s& f of pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws in valleys ridges etc 62 s / f of 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side laps fixed with l type or j type or cranked hook blots in roofs, walls, hips, ridges etc. ( si 11009, 11010 ) 63 s / f of cast iron rain water socketed pipes with lead joints without ears. ( si 11091 ) 63.01 75mm dia pipes 63.02 100mm dia pipes 63.03 150mm dia pipes 64 s / f of cast iron bends or elbows, square or obtuse. ( si 11095 ) 64.01 75mm dia 64.02 100mm dia 64.03 150mm dia 65 s / f of cast iron shoes ( sl 11100 ) 65.01 75mm dia 65.02 100mm dia 65.03 150mm dia 66 s / f of pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to wall or in floors. ( si 18181, 18183 ) 66.01 75mm bore pipes 66.02 110mm bore pipes 66.03 150mm bore pipes 67 s / f of pvc ( swr ) bends in any radius. ( sl 18185 ) 67.01 75mm bore 67.02 110mm bore 67.03 150mm bore 68 s / f of 5.0mm thick sheet ordinary quality square or rectangular nexc 1.0 sqm in each pane ( sl 16001 ) 69 preparing newly plastered surfaces and applying three coats of white wash on wall and ceiling surfaces. 70 all as item above but applying three coats of colour wash. 71 all as item above but applying three coats of dry distemper white or tinted. 72 preparing newly plastered surfaces, applying three coats of oil bound distemper over a coat of chalk whiting or plaster of paris in walls or ceiling. 73 preparing old treated surface of wall or ceiling and applying two coat of oil bound distemper. 74 preparing untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer. 75 preparing old treated surfaces of steel and applying two coats of synthectic enamel paint. 76 preparing untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink paint. 77 preparing old treated surfaces of wood and applying two coat of synthectic enamel paint 78 preparing untreated plastered surfaces and applying two coats of synthetic enamel paint over a coat of priming paint. 79 preparing old treated plastered surfaces and applying two coats of synthetic enamel paint. 80 preparing newly plastered surfaces and applying two coats of cement paint ( snowcem ) white or tinted on walls or ceilings. 81 preparing old treated plastered surfaces and applying two coats of cement paint ( snowcem ) white of tinted on walls or ceilings. 82 writing letters or figure ( block, roman, italic or indian ) upto 30 cms in height ( sl. 17041 ) 83 preparing newly plastered surfaces, applying birla putty rubbing to a smooth surfaces providing 2 or 3 coats of oil bound distemper white or tinted on walls or ceilings. 84 preparing old surfaces of wall or ceilings and applying two coats of waterproof / exterior paint using birla putty. 85 all in above but on new surfaces using birla putty 86 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operation: ( a ) applying a slurry coat of neat cement using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. ( b ) laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20m thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs ( c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge ( d ) finishing the surface with 20 mm thick jointless cement mortar of mix 1”4 ( 1 cement: 4 coarse sand ) admixed with water proofing compound conforming to is: 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 330x300 mm square 3mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer in charge: 22.7.1 with average thickness of 120mm and minimum thickness at khurra as 65 mm. 87 sand filling & spreading, leveling in layers nex. 25 cums thick well ramming including watering as required si ( 03017+03018+03019 ) 88 returning filling including spreading, leveling watering and well ramming in layers ( si 03009 ) 89 m & l for anodised aluminium door window and ventilator shutters fixed type with out sash bas, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading. screw & glaging clear or tinted etc. complete as specified ( si 10090 ) 90 anodised aluminium door window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips rubber packing, anodized aluminium fittings such as peg steys 150mm long ( 01 no. ) hinges type b 21 100mm long ( 2 no. ) suitable handle ( 1 no. ) with clear or tinted glazing complete all as specified ( si 10091 ) 91 providing 3 to 5 mm thick glass dividing strips, 30mm width fixed in floor finishes ( si 13062 ) 92 s / f of stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned 93 m&l for anti termite treatment in sides of foundation and walls & in floors as per manufacturing instructions. 94 s / f of aluminium grill of approved shape & design of 3 size complete in all respect. 95 s / f of ready made septic tank as approved by cantonment board complete in all respect of following size: 95.01 600x600mm 95.02 900x600mm 95.03 1200x600mm 96 dismantling of existing birck work built in cement mortar ( si 21004 ) 97 galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed 98 s&f of plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and / or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed 99 taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed. 100 taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed. 101 m&l for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. 102 m&l for gi steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 103 m&l for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed 104 s&f in repairs vitreous china squatting pan ( orissa pattern ) water closet ( white ) of size 580x440mm with integral foot rests, p or s trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of pcc ( 1:5:10 ) type e2 in filling, making good to floor, complete all as specified and directed. 105 s&f in repairs pvc valveless symphonic action type low level flushing cistern ( isi marked ) of 10 litre capacity including 32 mm dia pvc flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed 106 s&f in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in pcc 1:3:6 type c1 blocks of size 10x7.5x15cm, 32 mm dia pvc waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, ( excluding tap, waste chain & plug ) complete all as specified and directed. 107 s&f pvc connection 450 mm long suitable for 15 mm bore gi pipe including cp brass nuts on both sides, complete all as specified and directed. 108 s&f in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 109 s&f cp angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed. 110 s&f in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. 111 s&f in repair long body pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed. 112 s&f in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. 113 s&f 500 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical, vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified and directed. 114 s&f 20 mm ball valve high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all asspecified and directed 115 s&f gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed 116 material and labour for point wiring with 1.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed frls copper conductor cable with and including continuous earth wire of size 1.5 sq mm nominal cross sectional area, single core, 1100 volts grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non metallic pvc conduit of 20 mm dia or higher, medium grade complete with and including all pvc conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 amp complete all as specified and directed. 117 ditto all as per serial item no 116 here in before but one bell point controlled by one bell push, 06 amp complete all as specified and directed. 118 ditto all as per serial item no 116 here in before but one, two way light point controlled by two, two way switches, 06 amp complete all as specified and directed. 119 ditto as per serial item no 116 here in before but one 3 pin, 06 amp socket outlet point on independent board controlled by one, one way switch 06 amp complete all as specified and directed. 120 ditto as per serial item no 116 here in before but one 3 pin, 06 amp socket outlet point on same board controlled by one, one way switch 06 amp complete all as specified and directed. 121 ditto as per serial item no 116 here in before but point wiring with 2.5 sq mm single core frls cables and earth continuity wire of 1.5 sq mm single core frls cable for one 3 pin 16 amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed 122 ditto as per serial item no 116 here in before but point wiring with 2.5 sq mm single core frls cables and earth continuity wire of 1.5 sq mm single core frls cable for one 3 pin 16 amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed 123 supply and fix switch piano flush type, 06 amp, single pole, two way, 230 volt complete all as specified and directed. 124 supply and fix bell push, flush type, 06 amp, 230 volt complete all as specified and directed. 125 supply and fix socket outlet 2 in 1, 5 pin, 06 amp, flush type, 230 volt complete all as specified and directed. 126 supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 amp andm16 amp flush type, universal, 230 volt, four hole complete all as specified and directed. 127 supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, ac, 240 volt, 100 watt and duly isi marked complete all as specified & directed. 128 supply and fix lamp holder, pvc / polycarbonate type with back plate suitable for batten fitting including 07 watt led lamp b22 cdl complete all as specified & directed. 129 supply and fix ceiling rose, 6 amp, 250 volt, ac, isi marked with three equal size terminals and pvc / polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed. 130 material and labour for sub main wiring with 04 sq mm nominal cross sectional area, two single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable with and including continuous earth wire of size 2.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable and connected to common earth andearth dolly with suitable copper lugs and drawing into and including rigid non metallic pvc conduit of 25 mm dia, medium grade complete with and including all pvc conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed 131 supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, ac, 240 volt, 08 way, with 200 amp rated copper bus bar and metal door with ip 43 & ik 09 protection along with cable end box for above db and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. 132 supply and fix in replacement of mcb, sp, ac, 240 volt of 06 to 32 amp capacity c curve, 10 ka breaking capacity and making connections by using suitable copper lugs complete all as specified & directed 133 supply and fix in replacement of mcb, dp, ac, 240 volt of 32 amp capacity c curve, 10 ka breaking capacity and making connections by using suitable copper lugs complete all as specified & directed...

Directorate General Defence Estates - Uttar Pradesh

29916834 repair / maintenance of defence estate assets. 1 demolition of r.b. work built in cement mortar. ( si 21008 ) 2 demolition of rcc work as in lintels, beans, slabs etc. ( si 210018 ) 3 taking down cement plaster from walls or ceiling surfaces including tiles etc. and complete as specified. ( si 14041 ) 4 demolition of cement concrete as in floors or in paving etc. ( si 21015 ) 5 removal of dervish spoil, soil or demolished material to a distance 250 mt to 2.00 km. ( si 03033 ) 6 excavation of foundation trenches nexc 1.5m wide and nexc 1.5m depth and getting out in soft and loose soil. ( si 03006 ) 7 m & l for cement concrete type e 2 ( 1:5:10 ) with 40 mm graded brick aggregate as in foundations, sub bases or sub floors. ( si 04014+04025 ) 8 m & l for brick work with sub class ‘b’ bricks built in 1:6 cement mortar in sub structure and super structure. ( si 05004 ) 9 all as item above but brick work built in 1:4 cement mortar. ( si 05004 ) 10 m & l for brick work with sub class ‘b’ bricks built in 1:4 cement mortar in half brick thick walls. ( si 05005 ) 11 m & l for 40 mm thick damp proof course with type bo ( 1:2:4 ) cement concrete. ( si 05040 ) 12 all as item above but 25 mm thick. ( si 05040 ) 13 m & l for rcc work as in lintels, beams, columns, pillars etc with type b 1 ( 1:2:4 ) cement concrete. ( si 04043, 04044 ) 14 m & l for rcc work as in floor slabs, roof slabs, sunshades, chajjas, shelf, shelves, fins, facias etc. with type b 1 ( 1:2:4 ) cement concrete. ( si 04041 ) 15 providing form work to sides, soffits, edges of lintels, bearms, columns, pillars etc. rough finished and flat surfaces. ( si 07010, 07014 ) 16 all as items above but to floor slabs, roof slabs, chajjas, shelf, shelves, tins or facias etc. ( si 07006, 07013 ) 17 s / f of mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia 18 ditto, but 6mm to 8mm dia. 19 rendering 12mm thick to walls 1:6 cement mortar surface finished even and smooth. ( si 14007 ) 20 all as item above but 1:4 cement mortar. ( si 14007 ) 21 rendering 15mm thick to brick or concrete surfaces in 1:4 cement mortar surface finished ever and fair. ( si 14001, 14004 ) 22 rendering 5mm thick to ceiling 1:4 cement mortar surface finished even and smooth. ( si 14001, 14004 ) 23 applying finishing coat 3mm thick over cement plaster surfaces with neat cement slarry for smooth finished. ( si 14011 ) 24 s / f of mild steel work as in door frames or chowkats incl. hold fasts with mild steel sections complete as specified. ( si 10048 ) 25 s / f of mild steel work as in framing of door shutter ( covering of door shutters ) excluding steel sheeting with mild steel sections complete as specified. ( si 10048 ) 26 s / f of plain, mild steel black sheet 20 gauge in hearths, covering to door shutters and like complete as specified. ( si 10030 ) 27 s / f of welded steel wire fabric weight nexc 4kg per sqm and fitted to steel or wood member complete as specified. ( si 10053 ) 28 supply and fixing of galvanized mild steel wire cloth ( power loom ) 0.63mm nomind dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples. ( si 09157 ) 29 s / f of mild steel work such as grills or railing or gratings etc. with mild steel sections complete as specified. ( si 10007 ) 30 s / f of plain, solid, straight chowkats snd frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints in sal wood. ( si 08001 ) 31 s / f of 32mm thick flush shutters, solid core construction with block board ( isi ) and plywood face panels commercial type on both side. ( si 08022 ) 32 s / f of 35mm thick glazed and skelton shutters open rebated and prepared to received glass or gauge in sheesham wood complete as specified. ( si 08007 ) 33 s / f of 40mm thick plain, framed, paneled shutters ( any number of panels ) with panels of timber flat on both side in sheesham wood and complete as specified. ( si 08015 ) 34 s / f of steel windows or ventilators, fixed type with glazing bars. ( si 10070 ) 35 s / f of steel ventilators with top hung shutters including hinges, steel peg stay complete as specified. ( si 10075 ) 36 s / f of steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded. ( si 10071 ) 37 m & l for 25mm thick cement concrete type b 1 ( 1:2:4 ) as infloors, surface finished even and smooth w / o using extra cement. ( si 13036 ) 38 all as item above but 40mm thick floors. ( si 13036 ) 39 add to item no.37 or 38 if surface finished even and smooth using extra cement. ( si 13040 ) 40 m & l for 40mm thick fine dressed sand stone slabs in flooring over and including 15 to 25mm thick screed bed in 1:4 cement mortar, rubbing and polishing complete. ( si 13003 ) 41 all as item no. 42 but on vertical surfaces. ( si 13004 ) 42 m & l for 25 30mm thick machine cut kota stone slab flooring over and including 15 to 25mm thick screed bed in 1:4 cement mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achive mirror finish. ( si 13013 ) 43 m & l for 20 25mm thick white marble stone large slabs in floors, skirtings, cooking, plateforms, shelfs etc. over and including 15 to 25mm thick screed bed in 1:4 cement mortar, jointed and pointed in 1:2 cement mortar ( using white cement, marble dust ) rubbing and polishing complete as specified. ( si 06117 ) 44 all as item above but green, black or red granite stone slabs. ( si 06122 ) 45 m & l for 300mm x 300mm 6 to 7 min thick non skid white or coloured ceremic tiles in floors etc. over and including 15mm thick screed bed in 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. ( si 13082, 13087 ) 46 m & l for 600mm x 600mm, 6 to 7 min thick non skid white or coloured ceremic tiles in floors etc. over and including 15mm thick screed bed in 1:4 cement mortar, set and jointed in neat cement slurry and pointed in white or coloured cement to match. ( si 13086 ) 47 m & l for 300 x 450mm x 5 to 6mm thick glazed ceramic white or colored tiles in vertical surfaces like, skirtings, dados, risers or walls over and including 12mm thick screed bed in 1:4 cement mortar, set and jointed neat cement slurry and pointed in white or coloured cement to match. ( si 13080 ) 48 s / f of 35mm thick precast cement concrete louvers or jallies with type b o ( 1:2:4 ) cement concrete and set in 1:4 cement mortar. ( si 04034 ) 49 m & l for cement concrete with type b 1 ( 1:2:4 ) as in misc. work such as copings, groutings etc. ( si 04029 ) 50 s / f of mild steel barrel tower bolts chromium plated gp make with bright bolts. 50.01 100mm long 50.02 150mm long 50.03 200mm long 50.04 300mm long 51 s / f of aluminium anodised barrel tower bolts of extruded sections. ( si 09004 ) 51.01 100mm long 51.02 150mm long 51.03 200mm long 51.04 300mm long 52 s / f of mild steel sliding door bolts plate type chromium plated gp make complete as specified. ( si 09017 ) 52.01 250mm long 52.02 300mm long 52.03 350mm long 53 s / f of aluminium alloy anodised sliding door bolts plate type complete as specified. ( si 09019 ) 53.01 250mm long 53.02 300mm long 53.03 350mm long 54 s / f of butt hings heavy weight cold rolled mild steel complete as specified. ( si 09027 ) 54.01 75mm long 54.02 100mm long 54.03 125mm long 54.05 150mm long 55 s / f of mild steel chromium plated door handles gp make. ( si 09080 ) 55.01 100mm size 55.02 125mm size 55.03 150mm size 56 s / f of aluminum ( die cast ) door closer hydraulically regulated designation no. 3 universal type suitable for door shutter of 851 to 100mm in width and of weight between 61 to 80 kg. ( si 09154 ) 57 s / f of floor door stopper of aluminum alloy body and tounge anodized with hard drawn steel spring fixed in floors 150mm long plate. ( si 09149 ) 58 s / f of mild steel fan boxes ( weight 300gm to 500gm ) for ceiling fans. 59 s / f of mild steel work as vertical posts, rafters, purloins, cleats etc. in roofing with mild steel sections complete as specified. ( si 10040 ) 60 s& f of pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified 61 s& f of pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws in valleys ridges etc 62 s / f of 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side laps fixed with l type or j type or cranked hook blots in roofs, walls, hips, ridges etc. ( si 11009, 11010 ) 63 s / f of cast iron rain water socketed pipes with lead joints without ears. ( si 11091 ) 63.01 75mm dia pipes 63.02 100mm dia pipes 63.03 150mm dia pipes 64 s / f of cast iron bends or elbows, square or obtuse. ( si 11095 ) 64.01 75mm dia 64.02 100mm dia 64.03 150mm dia 65 s / f of cast iron shoes ( sl 11100 ) 65.01 75mm dia 65.02 100mm dia 65.03 150mm dia 66 s / f of pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to wall or in floors. ( si 18181, 18183 ) 66.01 75mm bore pipes 66.02 110mm bore pipes 66.03 150mm bore pipes 67 s / f of pvc ( swr ) bends in any radius. ( sl 18185 ) 67.01 75mm bore 67.02 110mm bore 67.03 150mm bore 68 s / f of 5.0mm thick sheet ordinary quality square or rectangular nexc 1.0 sqm in each pane ( sl 16001 ) 69 preparing newly plastered surfaces and applying three coats of white wash on wall and ceiling surfaces. 70 all as item above but applying three coats of colour wash. 71 all as item above but applying three coats of dry distemper white or tinted. 72 preparing newly plastered surfaces, applying three coats of oil bound distemper over a coat of chalk whiting or plaster of paris in walls or ceiling. 73 preparing old treated surface of wall or ceiling and applying two coat of oil bound distemper. 74 preparing untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer. 75 preparing old treated surfaces of steel and applying two coats of synthectic enamel paint. 76 preparing untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink paint. 77 preparing old treated surfaces of wood and applying two coat of synthectic enamel paint 78 preparing untreated plastered surfaces and applying two coats of synthetic enamel paint over a coat of priming paint. 79 preparing old treated plastered surfaces and applying two coats of synthetic enamel paint. 80 preparing newly plastered surfaces and applying two coats of cement paint ( snowcem ) white or tinted on walls or ceilings. 81 preparing old treated plastered surfaces and applying two coats of cement paint ( snowcem ) white of tinted on walls or ceilings. 82 writing letters or figure ( block, roman, italic or indian ) upto 30 cms in height ( sl. 17041 ) 83 preparing newly plastered surfaces, applying birla putty rubbing to a smooth surfaces providing 2 or 3 coats of oil bound distemper white or tinted on walls or ceilings. 84 preparing old surfaces of wall or ceilings and applying two coats of waterproof / exterior paint using birla putty. 85 all in above but on new surfaces using birla putty 86 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operation: ( a ) applying a slurry coat of neat cement using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. ( b ) laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20m thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs ( c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm. of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge ( d ) finishing the surface with 20 mm thick jointless cement mortar of mix 1”4 ( 1 cement: 4 coarse sand ) admixed with water proofing compound conforming to is: 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 330x300 mm square 3mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer in charge: 22.7.1 with average thickness of 120mm and minimum thickness at khurra as 65 mm. 87 sand filling & spreading, leveling in layers nex. 25 cums thick well ramming including watering as required si ( 03017+03018+03019 ) 88 returning filling including spreading, leveling watering and well ramming in layers ( si 03009 ) 89 m & l for anodised aluminium door window and ventilator shutters fixed type with out sash bas, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading. screw & glaging clear or tinted etc. complete as specified ( si 10090 ) 90 anodised aluminium door window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips rubber packing, anodized aluminium fittings such as peg steys 150mm long ( 01 no. ) hinges type b 21 100mm long ( 2 no. ) suitable handle ( 1 no. ) with clear or tinted glazing complete all as specified ( si 10091 ) 91 providing 3 to 5 mm thick glass dividing strips, 30mm width fixed in floor finishes ( si 13062 ) 92 s / f of stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned 93 m&l for anti termite treatment in sides of foundation and walls & in floors as per manufacturing instructions. 94 s / f of aluminium grill of approved shape & design of 3 size complete in all respect. 95 s / f of ready made septic tank as approved by cantonment board complete in all respect of following size: 95.01 600x600mm 95.02 900x600mm 95.03 1200x600mm 96 dismantling of existing birck work built in cement mortar ( si 21004 ) 97 galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed 98 s&f of plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and / or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed 99 taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed. 100 taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and directed. 101 m&l for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. 102 m&l for gi steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 103 m&l for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed 104 s&f in repairs vitreous china squatting pan ( orissa pattern ) water closet ( white ) of size 580x440mm with integral foot rests, p or s trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of pcc ( 1:5:10 ) type e2 in filling, making good to floor, complete all as specified and directed. 105 s&f in repairs pvc valveless symphonic action type low level flushing cistern ( isi marked ) of 10 litre capacity including 32 mm dia pvc flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed 106 s&f in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in pcc 1:3:6 type c1 blocks of size 10x7.5x15cm, 32 mm dia pvc waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, ( excluding tap, waste chain & plug ) complete all as specified and directed. 107 s&f pvc connection 450 mm long suitable for 15 mm bore gi pipe including cp brass nuts on both sides, complete all as specified and directed. 108 s&f in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 109 s&f cp angle valve long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed. 110 s&f in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. 111 s&f in repair long body pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed. 112 s&f in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. 113 s&f 500 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical, vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified and directed. 114 s&f 20 mm ball valve high pressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all asspecified and directed 115 s&f gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed 116 material and labour for point wiring with 1.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed frls copper conductor cable with and including continuous earth wire of size 1.5 sq mm nominal cross sectional area, single core, 1100 volts grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non metallic pvc conduit of 20 mm dia or higher, medium grade complete with and including all pvc conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 amp complete all as specified and directed. 117 ditto all as per serial item no 116 here in before but one bell point controlled by one bell push, 06 amp complete all as specified and directed. 118 ditto all as per serial item no 116 here in before but one, two way light point controlled by two, two way switches, 06 amp complete all as specified and directed. 119 ditto as per serial item no 116 here in before but one 3 pin, 06 amp socket outlet point on independent board controlled by one, one way switch 06 amp complete all as specified and directed. 120 ditto as per serial item no 116 here in before but one 3 pin, 06 amp socket outlet point on same board controlled by one, one way switch 06 amp complete all as specified and directed. 121 ditto as per serial item no 116 here in before but point wiring with 2.5 sq mm single core frls cables and earth continuity wire of 1.5 sq mm single core frls cable for one 3 pin 16 amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed 122 ditto as per serial item no 116 here in before but point wiring with 2.5 sq mm single core frls cables and earth continuity wire of 1.5 sq mm single core frls cable for one 3 pin 16 amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed 123 supply and fix switch piano flush type, 06 amp, single pole, two way, 230 volt complete all as specified and directed. 124 supply and fix bell push, flush type, 06 amp, 230 volt complete all as specified and directed. 125 supply and fix socket outlet 2 in 1, 5 pin, 06 amp, flush type, 230 volt complete all as specified and directed. 126 supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 amp andm16 amp flush type, universal, 230 volt, four hole complete all as specified and directed. 127 supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, ac, 240 volt, 100 watt and duly isi marked complete all as specified & directed. 128 supply and fix lamp holder, pvc / polycarbonate type with back plate suitable for batten fitting including 07 watt led lamp b22 cdl complete all as specified & directed. 129 supply and fix ceiling rose, 6 amp, 250 volt, ac, isi marked with three equal size terminals and pvc / polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed. 130 material and labour for sub main wiring with 04 sq mm nominal cross sectional area, two single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable with and including continuous earth wire of size 2.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi stranded, pvc insulated, unsheathed, frls copper conductor cable and connected to common earth andearth dolly with suitable copper lugs and drawing into and including rigid non metallic pvc conduit of 25 mm dia, medium grade complete with and including all pvc conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed 131 supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, ac, 240 volt, 08 way, with 200 amp rated copper bus bar and metal door with ip 43 & ik 09 protection along with cable end box for above db and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. 132 supply and fix in replacement of mcb, sp, ac, 240 volt of 06 to 32 amp capacity c curve, 10 ka breaking capacity and making connections by using suitable copper lugs complete all as specified & directed 133 supply and fix in replacement of mcb, dp, ac, 240 volt of 32 amp capacity c curve, 10 ka breaking capacity and making connections by using suitable copper lugs complete all as specified & directed...

Military Engineer Services - Uttar Pradesh

29767977 repair, replacement of joinery, steel window, ventilators, pvc doors glass panes wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony, under ge ( i ) r and d kanpur. repair, replacement of joinery, steel window, ventilators, pvc doors glass panes wire mesh etc in type i, type ii and type iii quarters of drdo and dgqa pool at raksha vihar colony, under ge ( i ) r and d kanpur....

Uttar Pradesh Projects Corporation Limited - Uttar Pradesh

29628376 balance work for construction of multipurpose seed store and technology dissemination centre, nanauta, saharanpur balance work for construction of multipurpose seed store and technology dissemination centre, nanauta, saharanpur , earth work in exacavation in foundationsin foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the e/i upto a distance of 30 mt. from the foundation trenches. , earth work in exacavation in foundationsin foundations main building, septic tank & soak pit in ordinary soil depth from 1.5m to 3.0 m i/c all cost of material,labour, t&p etc comp , earth work in filling on inside & campus of building i/c carrige up to 5.00 km with ramming, dressing proper compactioni/c all cost of material,labour, t&p etc complete , sand fillingin plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. , providing and laying in cement concrete1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including cost of form work, in foundation of main building, septic tank & soak pit , providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per i.s.6313 (partii 1981) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : (1) treatment for masonary & foundation 5 liters per sqm. (2) back fill in immediate contact with foundation 7.5 liters/sqm (3) treatment of top surface of plinth filling 5 liters/sqm (4)treatment junction of wall and the floor 7.5 liters /sqm (5) treatment of soil along external perimeter of building 7.5 liters/sqm (6) treatment of soil under apron along external perimter 5 liters/sqm. , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20. but for lintel (using 1:1.5:3 mix concrete f.f) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in slabg.floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20. , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in slabfirst floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20.(using 1:1.5:3 mix concrete) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lighter beam first floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20.i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete ) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in column first floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20..(using1:1.5:3mix concrete). , first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, t & p etc required for proper completion of the work. , first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar but in super structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. , first class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortarin superstructure for wall thickness 12 cms , providing & filling of brick bats inside of upper layer in soak pit i/c all cost of material, labour, t&p etc comp , providing and laying brick coba 120 mm thick laid with m 150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement & coarse sand mortar finised smooth & top mashed false square 30 cm x 30 cm & side wall parapet shall be mono lythic plaster wall up to 30 cm higherand junction & corner shall be rounded by brick ballast cement & coarse sand masonany coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, t& p etc complete for proper completion of work. , p/f h.y.s.d.bars of grade fe 500conforming to is:1786 2006 work such as reinforced concrete to required proper shape as necessary &its wastage including straightening, cutting,bending,binding placing in position for proper completion of the work and including supply of steelbend hooks and authorised over lapping shall be measured upto floor two level. , providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :(i)32 mm thick single leaf , (ii) 32 mm thick double leaf , mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (i)fabrication of holdfast for door, chaukhats and windows. , providing & fabrication of m.s. grill ondoor / windows , providing & fabrication ofz section steel windows with openable panels, excluding glass panes. , providing & fabrication ofangle iron chaukhat (40x40x5mm) , supply and fixing galvanized mosquitos proof heavy quality s.s.wire gaugeheavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, tools & plants etc. required for proper completion of the work. , fixing of door, windows / ventilators chaukhats in position. (a) door chaukhats , (b) window chaukhats , (c) ventilator chaukhats , 15 mm thick cement plaster with cement mortar in proportion of 1:4 cement & coarse sand. , 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6coarse sand , 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth & finshed even & smooth. (1) 1 cement : 6 coarse sand , 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth.in 1:3 (septic tank) , making grooves 10 to 12mmwide 8mm deep in plaster of the walls or in ceiling vertically or horizontally as required. , providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size on floor with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. , providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size on skirting with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. , kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick , kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. , supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. , painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3 apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour, t & p etc. required for proper completion of the work. , painting two coat over priming coat (but including cost of priming coat) on wooden surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3 apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour, t & p etc. required for proper completion of the work. , finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). , distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger,j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. , providing & fixing stainless steel sliding door bolts isi markedto required colour or shade with nuts and screws etc complete.(a) 250mm x 16mm , p/fixing stainless steel tower bolts isi marked to required colour or shade with necessary screws etc.(a) 250 mm x 10mm , providing & fixing stainless steel handles isi marked to required colour or shade with necessary screws etc. complete. 125 mm , providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete , providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) , providing & laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. this layer will be allowed to air cure for 4 hours. b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment & all corners, junctions of pipes with polymer mixed slurry. , chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).ordinary cement without any pigment , providingandfixingof iron(i)rolling shutter complete , (ii) spring wire 27.5 cm long grade 2 for shutter , (iii) top cover for rolling shutter , (iv)ball bearing for rolling shutter , providing and fixing water closet squatting pan (european type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: , providing & fixing white vitreous china wash basin with c.i. brackets painted white, 15mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mmc.p. brass waste of standard pattern includingcutting & making good the walls wherever required. ( a)flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap. , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern , providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete.a) 32mm dia , (b)40mm dia , providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c.p. brass screws and washers. , providing and fixing 45 cm long unplasticised pvc connection pipe with brass unions.(a) 15mm nominal bore , providing & fixing cp brass bib cock of approved quality conforming to is 8931 (a) 15mm nominal bore , providing & fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gmsa) 15mm nominal bore. , providing & fixing c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is 8931a) 15mm nominal bore , providing and fixing c.p. brass shower rose with 15 or 20 mm inlet 150 mm diameter , providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931 15 mm nominal bore , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter , (ii) 75 mm diameter , providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion coupler (i) 75 mm , (ii) coupler 110 mm , (iii) single tee with door 75x75x75 mm , (iv) single tee with door 110x110x110 mm , (v) single tee without door 75x75x75 mm , (vi)single tee without door 110x110x110 mm , (vii) bend 87.5°degree 75 mm dia , (viii) bend 87.5°degree 110 mm dia , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (i)110 mm dia , (ii) 75 mm dia , providing & fixing soil, wast and vent pipe.75 mm dia sand cost iron s&s pipe. , providing & fixing sand cost iron terminal guard 75 mm dia. , providing & fixing c.i. tee at the inlet & outlet of septic tank. , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion,(i) single socketed pipes 110 mm diameter , providing and fixing on wall face unplasticised pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion bend 87.5°degree (i) 110 mm , (ii) shoe (plain)110 mm shoe , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over p.v.c. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete , providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. (internal work).exposed on wall (i)15mm dianominal bore , 20mm dianominal bore , 25mm dia nominal bore , painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. (i)15mm dia nominal bore , (ii) 20mm dia nominal bore , (iii) 25mm dia nominal bore , excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. (a) pipes 80mm to 300mm diameter. , providing, laying and joining glazed stone ware pipes grade awith stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100mm diameter , (ii) 150mm diameter , providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround s.w. pipes including bed concrete as per standard design. a) 100mm diameters.w. pipe , 150mm diameters.w. pipe , providing and fixing square mouth s.w. gully trap grade a complete with c.i. grating brick masonry chamber with f.p.s. bricks of class designation 75 and water tight c.i. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.(a) 150 x 100 mm. size p type , constructing brick masonry manhole with 75 class designation f.p.s. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) rcc top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.a) inside size 90x80 cm & 45 cm deep including c.i. cover with frame (light duty) total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg & wt. of frame 15 kg. , supply & fixing of medium quality r.c.c. manhole coverwith frame complete.(i)hd. 20 circular shape ,560 int. dia. , (ii) m.d. 10 square shape ,450 int. dia. , supplyfixingand concealing of20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work .( for telephone/t.v.points) , s/f of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16swgm.s. sheet incorporating 10mm dia, m.s. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the r.c.c. roof before concreting along with supply of all materials, labour t & p etc., for proper completion of work , construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, t & p etc. required for proper completion of work.600x480x200 mm. size , supply and fixing of factory fabricated m.s. box in existing sunk with godrej type almirah cover with handle etc. fabricated from 18 swg m.s. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and dp/tpn; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and t & p etc. required for proper completion of the work.600x480x200 mm. size , supply and fixing of flush/surface mounting distribution boardswithout mcb with additional metal doorcomplete in all respects.6 way tpn cat a...

Military Engineer Services - Uttar Pradesh

29555551 repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur. repair to joinery, steel window, ventilator, pcc flooring, floor tiles, wall tiles, plaster, sanitary, plumbing fixures, and certain others b / r works in drdo, dgqa pool qtrs at war memorial colony, under ge ( i ) r and d kanpur....

Uttar Pradesh Projects Corporation Limited - Uttar Pradesh

29009842 supply of material for balance work construction of home guard training center jhansi district jhansi. bricks , 20mm guage approved stone grit , coarse sand , 6 supply of pozonolla portland cement as per isi code 1489 2015 ( prism, birla, acc. jaypee or equivalent ) every bag shall be deemed to contain 50 kg. of cement. the suppliers may liable to submit the test report . 7 supply of oil bound distemper of approved brand and manufacture & of required shade for undecorated wall surface to give an even shade overapproved brand & manufacture such as berger, asian paints 8 supply ofpremium acrylic smooth exterior paint with silicone additives of required shade :.manufacture such as berger, asian paints 9 supply of puttyof approved brand manufacture such as birla white putty , jk wall putty 10 supply ofisi marked flush door shutters conforming to is : 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws. required size as per site requirment 11 supply of m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. providing & fixing of hold fast for chaukhatsof doors and windows. 12 supply of m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. providing & fixing of door / windows grill. 13 supply of m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. z section steel windows 14 supply of m.s. or iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.angle iron door chaukhats 40*40*5 15 supply ofwire gauge laminated veneer lumber shutters conforming to is : 14616, and as per tads 15 :2001 ( part b ) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per is :1568, for doors, windows and clerestory windows, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws, as per directions of engineer in charge:30 mm thick shutters 16 supply of stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, 17 supply of stainless steel sliding door bolts isi marked to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 18 supplyof stainless steel towerbolts ( barrel type ) with necessary screws etc complete ( a ) 250 mm x 10mm 19 supply of stainless steel towerbolts ( barrel type ) with necessary screws etc complete ( a ) 200 mm x 10mm 20 supply of stainless steel handles with screws etc. complete ( a ) 125 mm 21 supply ofsynthetic enamel paint such as luxol3, hi gloss apcolite superlac, dulux , asian , berger 22 supply ofglass panes3.8 to 4.7 mm thick manufacture as per modi, atul approved brand 23 supply of light cinder filling under floor of toilets & other sunken roofs. 24 supply of isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. ( a ) 25 mm thick ( for cupboard ) including isi marked nickel plated bright finished m.s. piano hinges is : 3818 marked with necessary screws & one side laminated. 25 gst extra as per applicable...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

28701436 supply of material at 50 bedded ayush hospital, district baghpat 1. vitreous china sanitary ware : hindware / cera / somany 2. cp fitting : hindware / plumber / somany 3. cast iron pipe & fitting : skf / a / hif ( isi mark ) 4. g.m. gate valve / forged brass ball ( isi ) : nmc / leader 5. paint 1st quality : asian / berger / nerolac 6 g.i. pipe : jindal / tata / qst / tt swastic 7. g.i. pipe fitting : unik / new make / nmc / kmc 8. china ware fitting white colour : hindware / somany / cera make 9. c.p.v.c. & pvc pipe & fitting : supreme / prakash 10. granite stone 20mm + / 2mm : rosy pink / sadar ali grey / black / s white 11. m.s. window & ventilator : z section window made of 1.6mm thick approved hollow tubular section. 12. door chaukhat : angle iron frame / of 40x40x5 mm / 40x40x6mm isi. 13. flush door shutter : commercial flush door shutter 35mm thick 14. glassp pan 4mm thick in window : modi / saint gobain 15. pvc pipe & fitting isi 6 kg / sqcm : supreme / prakash make 16. cement : jk / birla uttam / acc / ultra tech / shree 17. t.m.t. steel fe 500 : sail / jindal / tata / tmt / rinl 18. china glazed wall / floor & vetrified tiles : kajaria / somani / orient 19. truss / ms work ( b class ) 8 supply of ist quality vitrified tiles of size 600x600mm approved by engineer in charge. ( kajaria / somani make ) 1 supply of ppc cement of leading manufacturer confirming to is specification ( as per is:1489 ( part 1 ) :2015 ( acc / shree cement / birla uttam ) . 4800.00 bag / 50kg 279.00 1339200.00 2 supply of coarse sand with finess modulus 2.2 and silt content not more than 5%. bulkage will be deducted @ 12.5% per cum or as per actual found at site. rate are including loading unloading, staking and cartage etc complete at for site. 650.00 cum 2850.00 1852500.00 3 supply of stone ballast 40mm graded crushed hard stone at site. voids will be deducted at the rate of 8% per cum rate are including loading unloading, staking and cartage etc complete at for site. 65.00 cum 2550.00 165750.00 4 supply of common burnt clay bricks class 150 with stacking at site as per is 1077 290000.00 nos 7.00 2030000.00 5 supply of first class brick bats voids will be deducted at the rate of 8% per cum rate are including loading unloading, staking and cartage etc complete at for site. 95.00 cum 1930.00 183350.00 6 supply of ist quality chequered tiles of size 300x300mm approved by engineer in charge. ( kajaria / somani make ) 226.65 sqm 550.00 124657.50 7 supply of kota stone 25mm thick of approved shade with one side table rubbed smooth finish cut size.8 supply of ist quality vitrified tiles of size 600x600mm approved by engineer in charge. ( kajaria / somani make ) 2603.33 sqm 710.00 1848364.30 9 supply of ist quality ceramic white glazed tiles of size 300x450mm approved by engineer in charge. ( kajaria / somani make ) 1618.37 sqm 575.00 930562.75 10 supply of cinder / foam concrete voids will be deducted at the rate of 8% per cum rate are including loading unloading, staking and cartage etc complete at for site. 55.29 cum 1985.50 109778.30 11 supply of 110 mm dia supreme pvc pipe isi for rain water 6kg / sqcm. 300.00 rmt 469.00 140700.00 12 supply of coupler isi 110 mm dia 26.00 nos 98.90 2571.40 13 supply of single tee isi with door 110x110x110 26.00 nos 170.70 4438.20 14 supply of bend isi 87.50 degree 110mm terrace 26.00 nos 109.05 2835.30 15 supply of shoe isi 110mm 26.00 nos 95.57 2484.82 16 supply of pvc pipe clamps. 2603.33 sqm 710.00 1848364.30 9 supply of ist quality ceramic white glazed tiles of size 300x450mm approved by engineer in charge. ( kajaria / somani make ) 1618.37 sqm 575.00 930562.75 10 supply of cinder / foam concrete voids will be deducted at the rate of 8% per cum rate are including loading unloading, staking and cartage etc complete at for site. 55.29 cum 1985.50 109778.30 11 supply of 110 mm dia supreme pvc pipe isi for rain water 6kg / sqcm. 300.00 rmt 469.00 140700.00 12 supply of coupler isi 110 mm dia 26.00 nos 98.90 2571.40 13 supply of single tee isi with door 110x110x110 26.00 nos 170.70 4438.20 14 supply of bend isi 87.50 degree 110mm terrace 26.00 nos 109.05 2835.30 15 supply of shoe isi 110mm 26.00 nos 95.57 2484.82 16 supply of pvc pipe clamps. 82.00 nos 242.50 19885.00 17 providing and fixing 24 swg gi chicken wire mess of size 12mm fixed with nalls / neat cement plaster etc 18 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 6404.46 kg 92.00 589210.32 19 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 3.78 sqm 2707.50 10234.35 20 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side / top / centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, ( sectional weight of only steel members shall be measured for payment ) .fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) 17078.40 kg 129.80 2216776.32 21 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with 2nd class teak wood beading 62x19 mm 427.02 sqm 570.00 243401.40 22 providing and fixing m.s. tubular frames for doors, windows, ventilators and cupboard with rectangular / ltype sections, made of 1.60 mm thick m.s. sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel rimer.fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) 2636.91 kg 115.30 304035.72 23 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, 4240.94 kg 110.00 466503.40 4 ladder, railings, brackets, gates and similar works 24 providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. m.s. tube...