37861997 plantation of trees shrubs on central verge and green belf towards sec 32 side and remaining length of 100mtr road between sec 29 33 with two year maintenance yeida...
37614574 maintenance of trees, shrubs and lawn of park and green belts including civil work ( boundary wall, pathway, hut ) in sector eta i for three years, greater noida...
37614571 tender for maintenance of trees, shrubs and lawn rsp, green belt in balance part of sector techzone iv for three years, greater noida...
37614560 maintenance of trees, shrubs and lawn in green belt and rsp side and grassing work in sector 12 on rsp side and smrity vatika park in sector 10, 12 for three years, greater noida...
37613453 tender for ljn division : maintenance of lawn hedge , shrub , flower beds ( horticulture work ) in railway officers colony bandariyabagh ( lucknow ) , drm office , ner officers club lucknow and transit house ner / lucknow bandariyabagh for one year...
37613104 maintenance of trees, shrubs and lawn of park and green belts including civil work staff colony in sector eta i for three years, greater noida...
37613095 tender for maintenance of trees, shrubs and lawn in park of sector 3 block a and balance park of block c and d for three years, greater noida...
37613089 tender for maintenance of trees, shrubs and lawn of rsp, green belt and central verge ( 0.00 to 3000.00 mtr and 80 mtr wide road central verge ) in sector 1 for three years, greater noida...
37613043 maintenance of trees, shrubs and lawn of central verge and park in sector 4, 16, 16c and sector ecotech 12 for three years, greater noida...
37606509 bids are invited for custom bid for services deployment of manpower as per annexure 1 for upkeep and maintenance of all types of horticulture works features i.e. lawns, flowerbeds, ground covers, trees / shrubs / topiary, hedges / edges, indoor & outdoor pot plants etc...
37550254 survey, soil investigation, design, construction, testing and commissioning of 50 kld feacal sludge co treatment plant at existing 16 mld jhunsi stp campus district prayagraj including all civil and em works required for successful completion of wo 1 50 kld feacal sludge co treatment plant at 16 mldjhunsi stp campus 2 construction of faecal sludge co treatment plant ( feacal sludge co treatment plant ) of 50 kld including all treatment modulesto meet following treated effluent quality parameters : ( including item no. 1.01 to 1.23 ) 3 parameter concentration not to exceed 4 bod 250 mg / l 5 cod 500 mg / l 6 tss 300 mg / l 7 ph 6 8.5 8 feacal coliform n / a 9 dewatered septage to be used as a fertilizer it should satisfy the following criteria of class a bio solids of us epa ( cept, 2015 ) . 10 faecal cloroform density < 1000 mpn / g total dry solid 11 salommenila sp density < 3mpn / 4g 12 helimith egg concentration of < 1 g total solid 13 e coli of 1000 / g total solid ( who, 2006 ) 14 the feacal sludge co treatment plant shallconsist of screening chambers, desludging units, anaerobic baffled reactor, sludge drying beds / screw press, settler and filter, planted gravel filters, sludge storageyard and other treatment units asper the technology used for treatmentin order to meet above treated effluent parameters includingstaff quarters and operator’s room, administrative buildings, watersupply works, storage tanks, electrical works, storm water drain , internal roads , dg set room , effluent channel for disposal, plumbing works etc. complete in all respect for all civil and electromechanical works 15 100% solid purethane coating of all structures / surfaces prone to corrosion and chemical action shall be provided. 16 the feacal sludge co treatment plant must also include all required sludge treatment facilities, process and control instrumentation, necessary facilities for laboratory and equipment, required buildings etc.to meet the desired standards as mentioned above.the work includes detailed design and drawings for completion of works in all respect including submission of as per built final completiondrawings . 17 construction of c.c. road includingconsruction of side wall supply of all materials, labour, tools and plants etc. complete. 18 design for the landscaping works: with flowering plants, shrubs and grass lawns 19 electrical work inside the campus 20 provision of cctv work. 21 provision for r.o. and water cooler work. 22 storm water drain 23 channel for disposal 24 soil testing 25 supply of cesspool vehicle 26 procurement of septage collection equipment including vacuum truck and appurtenances works following capacity including chasis and fabrication. 27 supply, testing and commissioning of 4000 ltr. capacity 28 supply, testing and commissioning of 3000 ltr. capacity 29 supply, testing and commissioning of 1000 ltr. capacity 30 other e&m works 31 construction of 100 mm. dia bore well of suitable depth by suitable method of drilling by rig m / c, development of borewell including all material, t & p required for proper completion ofworkand testing of water sample & also including construction of platformand drain etc 32 supply & installation ofsubmersible pump with all its accessories 33 supply and fixingof 20 watt led street light fitting confirming to ip 65 cataaa as perpwd schedule item no 1419 34 power connection 35 supply, instalation, testing and commissioning of power connection 10 kw commercial load...
37531129 auction of right of cutting, cleaning and removal of grass shrubs...
37420545 plantation of trees and shrubs on central verge of both side 45mtr wide roads near plot no a 1 and a 8 in scetor 29 and 30mtr wide internal road from plot no1328 to 1779 and from plot no 974 to 1576 sector 32 yeida...
37419309 tender for daily cleaning of trash rack of khara power house daily cleaning of trash rack of khara power house through out the year, round the clock for removal of algae, bushes, shrubs, grass, light & heavy debris & bodies of dead animals etc. and its disposal at suitable place including daily cleaning and upkeeping of trash rack area of 5 mtr. x 50 mtr....
37332605 tender for plantation of trees & shrubs on central verge of both side 45 mtr wide roads near plot no. a i & a 8 in sector 29 and 30 mtr wide internal road from plot no 1328 to 1779 & from plot no 974 to 1576 sector 32 yeida wc horti....
37267758 tender for cutting of wild grass, trees and shrubs and other related works...
37256308 auction sale of items contained in scrap industrial waste products arising in machanical workshop gorakhpur consisting of following items:1.decolite scrap released from floor of coaches.2.broken glass, unserviceable cottonrag, scrap timber, decolem, unserviceable gunny bags, canvas and formica released from coaches.3wood sawing mixed with andrubbish .burnt materials , broken ceramic items , thermocol etc.4.small broken pieces of plywood, unserviceable released packingwood fire wood.5.small broken pieces of rubber released from roofs of coaches.decayed and unserviceable rubbercomponents.6.broken and unserviceable pieces of asbestos cement seats released from shops.7.scrap pieces of unserviceable andbroken fire bricks.8.unserviceable pieces of stones, bolder concrete foundation and unserviceable pieces of other bricks.9.floorsweeping consisting of sand, mud, scrap paper, broken mirrors shrubs including dried grass and leaves, broken decolite and released / broken glasses from windows, ashes from other burnt materials, coal / coke ashes and debris, slag / mud released from tanks, boschtalk, bogie cleaning tank.10.corroded and unserviceable ferrous pieces corroded ms turning boring chips mixed with soil and floorsweepings either in pieces or converted to big lump formswhich are inseparable.11.pvc aluminium cables of different sizes withrubbish released from coaches and fuse without ferrous fitting.12.damaged and condemned rubber hose and pvc pipe pieces ofdifferent sixes, damaged torn vaccum hose pipe without universal coupling.13.damage and condemn foam rubber piecesrecron.14.decayed plywood, hardwood seat and roof felt, glass wool, roll packing, compregboard, hardwood sheet, sand, woodenpieces.15.condemned / unserviceable wooden seats without rexine and ferrous fittings.16.unserviceable scrap , released rexinepieces, pvc seats, foam coir seats and rubber round washer, packing rings.17.broken damaged unserviceable scrap releasedsunmica pieces. 18.unserviceable frp products like window shutters , lavatory wall protector, commode chute, fish tails, banjoshutters, mouldings, channel etc.front and rear cover of axle boxes etc.19.engineering garbage not required by iow and generatedinside workshop like tree branches , loose earth etc.20.unserviceable primary and secondary filter.21.miscellaneous rubbish includingcondemned greasy / oily waste, oily dirt & amp, mud mixed with rubbish heaps excluding sludge oil.22.off ?cuts of new unusableplywood / compreg / hardwood sheets of various sizes.23. off cutshop new unusable pvc sheet.24.old / unserviceable / decomposed / perished torn uic rubber vestibule, rubber hoses, orings, diaphragms, washers, pads, felt ring etc. .25. broken.faded / decayedsunmica, limpet sheets &. nftc 26.broken / unserviceable plastic, , synthetic, nylon, phenolic, acetal, hppe, polysterresinbushes.27.broken / unserviceable glass of all types.28.scrap paper, cord board cartoons, packing material.29.condemned bakellitecover, switches, fuses, boards ( including small metallic pieces integral with these items but metallic portion ) .30.unserviceable ceramic vent plug from tl battery , float with float guide of tl battery, frp tray of battery box, frp blade of fan etc.31.broken / damaged / unserviceable lavatory doors with or without latch / handle and other ferrous fittings, 32.less than five feet ferrous non ferrous and rail will be delivered if found available....
37256306 auction sale of items contained in scrap industrial waste products arising in machanical workshop gorakhpur consisting of following items:1.decolite scrap released from floor of coaches.2.broken glass,unserviceable cottonrag,scrap timber,decolem,unserviceable gunny bags, canvas and formica released from coaches.3wood sawing mixed with andrubbish .burnt materials , broken ceramic items ,thermocol etc.4.small broken pieces of plywood, unserviceable released packingwood fire wood.5.small broken pieces of rubber released from roofs of coaches.decayed and unserviceable rubbercomponents.6.broken and unserviceable pieces of asbestos cement seats released from shops.7.scrap pieces of unserviceable andbroken fire bricks.8.unserviceable pieces of stones, bolder concrete foundation and unserviceable pieces of other bricks.9.floorsweeping consisting of sand, mud,scrap paper, broken mirrors shrubs including dried grass and leaves, broken decolite and released/broken glasses from windows, ashes from other burnt materials, coal/coke ashes and debris, slag/mud released from tanks, boschtalk, bogie cleaning tank.10.corroded and unserviceable ferrous pieces corroded ms turning boring chips mixed with soil and floorsweepings either in pieces or converted to big lump formswhich are inseparable.11.pvc aluminium cables of different sizes withrubbish released from coaches and fuse without ferrous fitting.12.damaged and condemned rubber hose and pvc pipe pieces ofdifferent sixes, damaged torn vaccum hose pipe without universal coupling.13.damage and condemn foam rubber piecesrecron.14.decayed plywood, hardwood seat and roof felt, glass wool, roll packing, compregboard,hardwood sheet,sand,woodenpieces.15.condemned/ unserviceable wooden seats without rexine and ferrous fittings.16.unserviceable scrap ,released rexinepieces,pvc seats, foam coir seats and rubber round washer, packing rings.17.broken damaged unserviceable scrap releasedsunmica pieces. 18.unserviceable frp products like window shutters ,lavatory wall protector, commode chute,fish tails, banjoshutters, mouldings, channel etc.front and rear cover of axle boxes etc.19.engineering garbage not required by iow and generatedinside workshop like tree branches ,loose earth etc.20.unserviceable primary and secondary filter.21.miscellaneous rubbish includingcondemned greasy/oily waste, oily dirt & amp, mud mixed with rubbish heaps excluding sludge oil.22.off ?cuts of new unusableplywood/compreg/hardwood sheets of various sizes.23. off cutshop new unusable pvc sheet.24.old/unserviceable/decomposed/perished torn uic rubber vestibule, rubber hoses, orings, diaphragms,washers,pads,felt ring etc. .25. broken.faded/decayedsunmica,limpet sheets &. nftc 26.broken/unserviceable plastic, ,synthetic,nylon, phenolic,acetal,hppe,polysterresinbushes.27.broken/unserviceable glass of all types.28.scrap paper,cord board cartoons,packing material.29.condemned bakellitecover,switches,fuses,boards(including small metallic pieces integral with these items but metallic portion).30.unserviceable ceramic vent plug from tl battery ,float with float guide of tl battery, frp tray of battery box, frp blade of fan etc.31.broken/damaged /unserviceable lavatory doors with or without latch/handle and other ferrous fittings32.less than five feet ferrous non ferrous and rail will be delivered if found available....
37218993 tender for cutting of wild grass, trees and shrubs and other related work...
37142957 maintenance of lawn, hedge, trees, shrubs and flower beds etc in drm office compound, drm bungalow, officers colony bungalows, divisional railway hospital and station area of agc ( for 24 months ) ...
37046075 tender for plantation of trees & shrubs in kabristan of village siroli bangar with two year maintenance for year...
37045571 maintenance of trees, shrubs and lawn in central verge of 60 mtr wide road between sector delta i and ii and delta iii, delta i and kp iv, delta iii and zeta i, delta ii and eta for three years, greater noida...
37028162 providing of trees shrubs on internal roads in sec.32 with two year maintenance for yea. wc horti...
37023291 tender for plantation of trees shrubs in kabristan of village siroli bangar with two year maintnenace for yeida. wc horti...
37023256 tender for providing of trees shrubs on internal roads in sec. 32 with two year maintenance for yea. wc horti...
36931596 supply of general goods in jhansi nagar 1 fiber plate small fiber plate large tumbler set ( borosil ) colleen elder hit big room freshener footrest small toe big all out tool bag ( fabric ) , harpic big size inchitep 30 m. inchitep 15 m. mr. mayor / no. mr. vehicle flags wipe candle ( packet ) chapada ( packet ) | air wick ( packet ) nirma powder 500g handvansh dettol electric kettle tea maker ( havells company ) twine ( large bundle ) rubber band ( packet 500 grams ) quinine pill packet ( packet ) dishwashing echo ( packet ) laizal plastic jars ( large ) water drinking bottle plastic 29 30 , tale harish / link company bade wale mikes sal 09 bolt tray set 31 32 33 extension board ( big 06 switch, power socket, dor val remote bali odonil 34 35 clock cells remote cell 36 37 tricolor flag ( 02 nos. ) 38 flag cord 39 viper 40 41 umbrella ( branded ) phenyl 1 l phenyl 5 l0 wall clock ( ajanta, citizen or equivalent ) car towel large ( bombay dyeing ) cent small towel st camper 10l ( saloe, citizen, equivalent ) camper 5 le ( salo, citizen, equivalent ) | thermos 2 liters ( cold, hot ) sikkos broom flowering shrub plastic bucket 15 l laggi hoarding bali ( stick with iron frame ) bamboo eggs ( enforcement team ) , fivers eggs ( enforcement team ) signal switch condenser ( of fan ) gang box ( light fitting ) 60 rubber gloves large cement pots 1.50 feet 61 black soil ( for gardening ) 62 cow dung ( for horticulture ) the sound of cement ( in tanks, cow sheds ) , thick rope ( in cowsheds ) plastic half tank ( in cowsheds ) , tripal ( army cloth ) in cowsheds legum ½ inch ( kisan company or equivalent ) lejam ek inchi ( farmers company or equivalent ) lejam paun inchi ( farmers company or equivalent ) legum 1.5 inch ( farmers company or equivalent ) , grass cutting machines cord ( cable ) 4 mm. bamboo nugget ( for keeping straw in cowsheds ) , sackcloth ( in the cowshed ) torches.... ( everrandi, havells, star line or equivalent ) wall clock ( ajanta or equivalent ) 76 marquee cloth toilet brush cup plate set ( glass borosil or equivalent ) , dustbin ( cello 10 liters ) seals ( of officers name, office etc. ) 81 name plate ( five key ) ...
36917201 maintenance of trees, shrubs and lawn on 45 mtr., 60 mtr. and 80 mtr. wide connecting road and service road of 130 mtr wide road and sector techzone 7 for three years, greater noida...
36587664 bids are invited for shrub master (q3) total quantity : 1...
36496881 bids are invited for shrub master (q3) total quantity : 1...
36481004 tender for amrc for pipeline work for construction / maintenance activities for repair / modification / upgradation for gail gas ( o&m ) in ttz region for a period of 2 years. 2 emergency response team 3 for steel pipe line 4 emergency mobilization of fabrication team with all required / necessary equipments / tools tackles etc. alongwith availability of required ndt team with required consumable for attending the emergency of gas leak / burst / damage to steel pipe line ( upto size 10 ) in firozabad ( the scope includes all emergency related works, trenching as required, execution of work which may include replacement of pipe piece / installation of leak repair clamp / welding if reqd / ndt if required / coating if required and thereafter back filling / restoration of site as reqd ) . the pipe, pipe fittings & leak reapir clamp are free issue materials. all otehr materials $ consumables are in the scope of contractor. welding if required will be paid separately as per sor items. the readiness & availability with qualified team with all resources to be ensured as early as possible or within 06 hrs after intimation from eic. this sor is to be based on incident basis. 5 for mdpe pipeline 6 emergency mobilisation of team comprising adequate skilled & unskilled manpower and machinery, tools & tackles, etc. as applicable for providing services for jointing of underground mdpe pipeline size 20 125 mm dia. in case of any damage resulting in gas leakage including excavation, squeezing the pipeline, cutting, preparing and fusion welding the fittings, leak test, backfilling and complete restoration of site to its original condition in all respect. the work includes deployment of machineries like jcb, de watering pump, fusion welding machine, etc. in all type of surface such as normal soft surface, hard surface, rcc pavement, etc. the contractor shall also ensure barricading of site, public handling, etc. the supply of all materials ( except mdpe pipe fittings ) shall be in the scope of contractor. mdpe pipes & mdpe fittings will be supplied by gail gas. the readiness and availability of team with all resources to be ensured as early as possible or within 04 hrs. after intimation from eic. this sor item is based on per incident basis. 7 pipeline laying / installation ( carbon steel pipes ) 8 receiving and taking over as defined in the specifications, handling, loading, transportation and unloading of owner supplied 3 layer pe coated line pipes alongwith associated fittings and valves from owners designated stock yard ( in agra city gate station / fzd cgs / bharatpur stores / kosi stores as mentioned in scope of work ) to contractors stock yard / workshop / work site including preliminary activities, preparation of drawings, wherever required for crossing etc. including handling, stacking, stringing on the pipe line right of use / pipeline route alignment, carrying out inspection of company supplied materials including line pipes at the time of taking over, laying / installation of coated line pipes, associated fittings and accessories ( including elbows / bends / valves / ij / flanges / reducers / tees, etc. the supply part is separate ) , including execution of all works, taking over, handling, including loading and unloading, arrangement of all additional lands required for contractors storage, fabrication, access for construction, procurement and supply of all materials ( except owner supplied materials ) , consumables ( such as gaskets of required size / nut bolts / studs / flanges if required etc ) , equipment, labour and other inputs, carrying out all temporary, ancillary, auxiliary works, ready for commissioning of pipeline as per drawings, specifications, other provisions of contract document and instructions of engineer in charge, including but not limited to carrying out the following works. however, the above ground pipe line laying / installation / erection works may be considered through mechanical works, if additional.checking, cleaning, aligning, bending, cutting and bevelling ( as required ) of pipes for welding and field adjustments including pipe fittings, welding, carrying out ndt of welds as required including 100% radiography by x ray / gamma ray as per specification in piping of all types ( sizes / thickness / schedule ) by an approved vendor with all relevent competent supporting documents ( interpretation of ndt by owners appointed / approved third party ) and providing all requisite equipment, labour, supervision, materials, films, consumables, all facilities and personnel to process, develop, examine and interpret radiographs and other tests as required, carrying out repairs of weld joints found defective, carrying out re radiography and other tests as required on repaired joints etc. as mentioned in special condition of contract ( scc ) & particular job specification. line pipe laying & installation with radiography by x ray / gamma ray. installation of carrier line pipe at all crossings viz road, cartrack, pathway, drain, nallah & minor water crossings etc. at designated depth by open cut ( including laying of casing pipe ) ( except at hdd / moling / boring cased crossings which is covered separately elsewhere in this sor ) .protective coating including supply of coating & other materials duly approved by owner for all piping valves, fittings, structural steels etc. for buried installation and inside the valve pit. 9 carrying out air cleaning, pigging, flushing, cleaning and hydrostatic testing of complete pipeline with required quantity of corrosion inhibitor including pre testing of designated sections complete as per specification and approved by engineer in charge to specified pressures indicated elsewhere and duration after stabilization as per specification, providing all equipment, pumps, fittings, instruments, ( if required dead weight tester, pressure recorder, thermocouples etc. also ) and services, supervision, labour, consumables, water including supply of corrosion inhibitor, air, etc. as required, locating of leaks and rectification of defect attributable to contractor ( rectification of defects in linepipe material not attributable to contractor shall be paid separately as per other item of schedule of rate ) , re testing after rectification, dewatering after successful completion of hydrotesting of entire section and as approved by engineer in charge. complete commissioning of the laid pipe line after filling nitrogen ( inert atmosphere ) and as per standard procedures approved by the third party / consultant / authorized representative of gail gas as per instruction of eic. all the site requirement or consumables are included in the scope of contractor and the decision of eic will be final in any case. complete back filling or restoration of the trench loose soil or digged soil ( throughout the pipe line lenth ) to be back filled as normal and final clean up of the area up to the satisfaction of consultant / gail gas / eic and the reports are to be submitted, however if the additional work is invoved in restoration that is to be paid extra if needed. 10 note: the above ground pipe line works for ( any size ) is to be taken care from the mechanical works and payments are be regulaized as per mech works sor. 11 specified size ( nb ) 12 50 mm ( 2 ) , cs, ( equal / less pipe dia ) 13 100 mm ( 4 ) , cs, ( equal / less pipe dia / including above 2 to 4 ) 14 150 mm / 200mm / 250mm ( 6 / 8 / 10 ) cs 15 sleeve welding 16 longitudinal butt welding and circumferencial lap welding of sleeve / clamp of any size / thk ( dia up to 10 ) on the carrier pipe line ( charged gas pipe line ) 17 installation of full encirclement of split sleeve by welding on natural gas charged pipe line ( up to dia 10” ) with proper procedures & safety. this all will include the shifting / transporting of sleeve from desisnated gail gas stores to the site, excavation on site as per requirement, peeling off / removal of coating from the pipe line, carrying out the described jobs, all type of ndt / tests, as per requirements & instruction of eic, coating of the sleeve and back filling & clearing of the site by a qualified team ( welder / fitter / etc ) as per other site coordination, if required is in the scope of contractor. the complete responsibility of complete works lie with the contractor, including any liasioning required during the work execution. contractor has to manage all sorts of compensation / insurance policy, as required. 18 supply of fittings 19 bends ( r=3d ) 4 nb, 7.1mm angle 46 to 90 degree 20 bends ( r=3d ) 4 nb, 7.1mm w.t. angle upto 45 degree 21 bends ( r=3d ) 8 nb, 7.1 mm w.t., angle 46 to 90 deg ( or dia 6 ) or sch 80 22 bends ( r=3d ) 8 nb, 7.1 mm w.t., angle upto 45 deg ( or dia 6 ) or sch 80 23 elbow 90 deg 2 thk 6.4 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including below 2. 24 elbow 45 deg 2 thk 6.4 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including below 2. 25 elbow 90 deg 4 thk 7.1 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including above 2 to 4. 26 elbow 45 deg 4 thk 7.1 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including above 2 to 4. 27 equal tee 4x4x4 thickness ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached. ) or as per site requirement 28 equal tee 2x2x2 thickness ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 29 unequal tee 8x4 thickness 7.1 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 30 unequal tee 4x2 thickness 6.4 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 31 unequal tee3x2 thickness 6.4 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 32 reducer 4x3 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 33 reducer 3x2 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 34 reducer 4x2 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 35 reducer 2x1 1 / 2 or 1 ( a234, gr.wpb, b 16.9 ) thickness 6.4 mm 36 end cap ( a234, gr.wpb, b 16.9 ) 2 thickness 6.4 mm 37 end cap ( a234, gr.wpb, b 16.9 ) 1 to 1 1 / 12 thickness 6.4 mm 38 end cap ( a234, gr.wpb, b 16.9 ) from dia 3 or 4 thickness 6.4 mm 39 end cap 8 ( a234, gr.wpb, b 16.9 ) 40 insulation joint dia 2x 300# ( sch 80 ) api 5l gr b 41 insulation joint dia 4x 300# ( sch 80 ) api 5l gr b 42 note : materials for fittings / end caps / elbows has to be as per complaince of pngrb specification & standards. supply part excludes the laying and installation with main pipe line works for which additional payment to be made. 43 supply of butt weld ball valves 44 2 # 300, bw, cs, full bore valve 45 4 # 300, bw, cs, full bore valve 46 8 # 300, bw, cs, full bore valve 47 note : ball valve, carbon steel, butt welded, full bore for natural gas pipeline service ( astm a105 & as per technical specification approved and to be procured from approved vendors of gail / gail gas / mecon / eil / pdil / equivalent ) ) 48 note : the installation of fitting / valves / ij / surge diverter / etc is to be considered as normal working of pipe line laying works and the payments for the works is to be done on the basis of normal items of excavation / welding / ndt / coating / etc as per sor covered in the contract. 49 installation of carrier pipe crossings by hdd method at crossing without casing pipe 50 complete work of installation of carrier pipe at crossings ( between the limits as defined in approved drawings ) by hdd method for road, nallah, drain and canal wherever required in all types of soils and terrains including receiving and taking over owner supplied three layer pe coated line pipes from owners designated place of issue / dump site ( s ) and transportation to contractors stock yard / work shop / work site including all handling, loading, unloading, aligning etc. supply of all contractor supplied material including manpower, equipment, consumables, other resources and aquiring the required land for storage, fabrication inclduing string preparation of pipes, welding, welding repair, radiography, coating of field joints with special type heat shrink sleeve and repair of pipeline coating with special repair patch materials as per specification, strapping of cs conduit with main pipeline subducted with hdpe conduit for laying / blowing of ofc cable, pre testing etc. of complete string made, etc. and execution of, but not limited to, following works in accordance with specifications and instruction of engineer in charge and as per all provision of contract document. 51 note:the length mentioned in sor is indicative for all the crossing to be done by hdd & locations shall be decided by gail gas / consultant prior to start of job depending upon site condition. payment for the length of final tied in carrier pipeline string with mainline laid by hdd are inclusive in this above item rate. no any separate payment shall be made under other clauses mentioned elsewhere. 52 installation of 2 nb coated carbon steel pipe 53 installation of 4 nb coated carbon steel pipe 54 installation of 10 / 8 / 6nb coated carbon steel pipe 55 crossing ( uncased ) 56 installation of casing pipe by jacking / boring / moling for road, rail, nalah, drain etc. crossings wherever required in all types of soils and terrains, including all associated works like supply of all other contractor supplied materials viz. casing insulators and casing end seals, materials for casing vents and drain etc. including supply of all other materials, equipment, consumables, manpower, welding including visual inspection of all weld joints, installation of casing insulators end seals, vent and drain off pipes, backfilling and restoration as original of the facility crossed and performing all works as per drawings, specifications and instructions of engineer in charge and provisions of contract document. 57 note: the length mentioned in sor is indicative for all the crossing to be done by jacking / boring numbers & locations shall be decided by gail gas / consultant prior to start of job depending upon site condition. width of the above crossing mentioned is tentative. actual length & cover from top of casing pipe string may vary depending upon site conditions, crossing methods, approved drawings etc. and / or decided by concerned authority / engineer in charge. the length mentioned in sor is indicative for all the crossing & locations shall be decided by engineer in charge depending upon site condition. payment for the length of final tied in carrier pipeline string with mainline laid by jacking / boring method & moling are inclusive in this above item rate. no any separate payment shall be made under other clauses mentioned elsewhere. 58 installation of 2 nb coated carbon steel pipeline without casing 59 installation of 4 nb pe coated carbon steel pipeline without casing 60 installation of 6 / 8 / 10 nb pe coated carbon steel pipeline without casing 61 repair of coating defects ( not attributable to contractor ) 62 coating on pipe lines ( repair / bare pipe line / fitting additional ( not attributed to contractor ) 63 apply of all coating materials including supply as per heat shrink sleeve or cold tape application methedology with specification to be compatible with pipe coating material, supply of all consumables, utilities, equipments and all manpower required, pipe cleaning and surface preparation by sand blasting, repairing of coating defects ( resulting in holiday ) for line pipes, performing all works necessary for the completion of the works stirctly in accordance with relevant specification and instructions of engineer in charge. this rate shall be applicable per running meter of the exposed steel area. 64 for pipeline size 2 nb 65 for pipeline size 4 nb 66 for pipeline size 10 / 8 / 6 nb 67 hot tap works ( excluding split tee / weldolet / ball valve ) 68 complete work for providing hot tap off, excavation for required depth & back filling / restoration to original condition including installation of valves & flanges, etc. on underground pipeline, arranging all manpower, machineries, tools & tackles, consumables ( such as flanges / blinds of required size / gaskets / studs, nut bolts / etc and coating on fitiings if required ) . 69 hot tapping machine for making hot tap also to be provided by the contractor with all safety precautions, as per standard norms / practice & instruction of engineer in charge. 70 2 hot tapping on 4 / 6 / 8 / 10 natural gas pipeline 71 4 hot tapping on 4 / 6 natural gas pipeline 72 4 hot tapping on 8 / 10 natural gas pipeline 73 hot tapping fittings supply ( split tee ) 74 supply & installation of split tee of the required / specified specification suitable for api 5l gr.x 46, 6.4 mm / available thichness header pipe line. ( complete with backing bars and run off plates ) or suitable for hydro carbon services for cgd networks as per pngrb guidelines. 75 4x 2 spilt tee class 300# rf 76 8x4 spilt tee class 300# rf 77 8x 2spilt tee class 300 # rf 78 hook up with existing pipeline after shut down of operating pipeline 79 complete work for providing tap off on underground / aboveground pipeline including supply of all associated required fittings, flanges, consumables, excluding valves ( which are covered separately ) , arranging all manpower, machineries, tools & tackles, consumables ( coating on the welded portion or opened cleaned buffed portion for shut down including supply of coating materials ) , excavation for the pipe line trenching up to the required depth & sizes and restoration to original condition after works completion and ndt also for hook up with existing pipeline with all precautions, as per standard norms / practice & instruction of engineer in charge. instead of hook up with existing pipeline the work may involve removing existing leak repair clamp by cutting damaged pipe piece out & replacement with welding of 1 m ( approx. ) cs pipe including hydrotesting & transportation of the cs pipe piece from gail gas stores at firozabad kosi & cutting, beveling, ndt, etc. note: above work may involve inertization & purging of the pipeline section with nitrogen prior to start of welding work and payment will be made separately as per respective sor item. wherever applicable dismantling of existing structures such as rcc drain, etc is to be done without stopping the flow of water by making alternative arrangement for water flow till completion of work and reconstruction of the dismantled structure. the rate to include necessary arrangement for maitaining water flow. payment for dismantling and reconstruction will be made separately through respective sor items. 80 2 pipe line to be hooked up to existing pipeline sizes from dia 2 to dia 10 81 4 pipe line to be hooked up to existing pipeline sizes from dia 2 to dia 10 82 6 / 8 / 10 pipe line to be hooked up to existing pipeline sizes from dia 4 to dia 10 83 metering skid 84 erection / installation of metering skid on foundation at the desired location ( skid type upto g 600 metering skid with size up to 4.5 mtr. x 2.5 mtr. / 5.0 mt of weight ) including the labour cost / arrangement of crane or required machinery cost & necessary coordination at site. 85 transportation of metering skid: shifting of metering skid ( type upto g 600 metering skid with size up to 4.5 mtr. x 2.5 mtr. / 5.0 mt of weight ) ) , from firozabad cgs, agra cgs or kosi store yard and erection / installation on foundation in the premises of consumer ( or ) removal from foundation from the consumer premises and shifting to acgs / fcgs / kosi store yard. the item also includes the arrangement for loading / unloading and the necessary labour cost etc. 86 disconnection of existing connectivity: 87 disconnection of existing cs pipeline: excavation of pit suitable for work, disconnection of existing connectvity upto 4 size of cs line during shut down ( to be arranged by owner ) from the main / branch line by cold cutting, capping / plugging by end cap of requisite size ( to be provided by owner ) through welding, its ndt including supply of all manpower, machineries & nitrogen gas for local purging etc. the work shall also include removal of above ground pipe spool, fittings ( size upto 4 ) , tlp etc. from the premises of consumer and its shifting to gail gas designated stores / yard as per instruction of eic. the pipeline piece which can not be recovered shall be dealt as unusable. ( however, the above ground disconnection is to be treated as normal joint. ) 88 miscellaneous mechanical works : 89 welding works: receiving, handling, loading, transportation and unloading of all owner supplied materials from owners designated stock yards to contractors own stock yards / workshops / work sites including, preparation of drawing, welding of pipe spools & associated fittings, supply of all consumables, manpower / machineries, supervision and shifting of welded spools to consumer end as per instructions of engineer in charge. 90 cutting & re beveling: removal of flanges / fittings from existing piping spools by gas cutting / grinding, edge preparation inlcuding supply of all manpower, supervision, consumables etc. 91 radiography ( x ray / gamma ray ) : performance of radiographic inspection on piping of all types, sizes, thickness including providing or hiring of all necessary equipment, tools and tackles though not expressly mentioned but requied to perform the work as per specification and instruction of engineer in charge. radiographs & reports shall be submitted to the engineer in charge. 92 purging with nitrogen for existing u / g pipline system: inertization & purging of the pipeline section with nitrogen for existing underground pipeline network prior to carrying out hotwork during shutdown, including supply of all equipment, man power, consumables ( including nitrogen required for purging / filling ) , materials for all temporary works and performing all associated works, complete as per the relevant specifications, and instructions of engineer in charge. 93 8 pipeline 94 4 pipeline 95 3 pipeline & below 96 steel fabrication & mechanical works 97 fabrication of ms structural / mechanical works of different sizes ( all materials to be isi marked ) including procurement of materials i.e hinges nuts, bolts, washers of all sizes etc. / ms plates / sheets of reqd size as per site requirements / eic, primer, coating / painting etc. and transportation at site, as required ( complete in all respect ) , any specific part / piece / materials may be paid separately, if required however fabrication part remains included. fabrication & fixing of different type of fabricated structures / mechanical covers for valve pits / man holes with its frame, if required and other supports, etc. ( this will include the removal of old / damaged scrap materials from site to the designated place as instructed by eic, if required ) . 98 civil works 99 dismantling of existing rcc work / any civil structure. the purpose of dismantling is to make required space for the welding or other work to be done. 100 rcc work: providing reinforced cement concrete of grade ( 1: 1.5: 3 ) with 20mm and down grade crushed stone aggregate in all types of structures like rcc wall, foundations, pedestals, pedestal bases, pipe supports, etc. at all depths and heights complete as per drawings, specifications and direction of the eic. ( including cost of providing shuttering etc. but excluding supply of reinforcement steel which will be paid separately as per sor item ) . 101 reinforcement steel: supplying, fabricating & fixing in position hysd steel reinforcement / tmt grade fe 415 conforming to is 1786 1985 at all level ( all depth & height ) and positions including the cost of transport, straightening, cutting, bending , cranking, binding, welding, provision of necessary chairs and spacers, as per drawings and specifications and including the cost of binding wire, labour etc. as per scope of work and direction of eic. 102 excavation works: earth work in excavation below ground level for all kinds of works in all types of soil as directed by eic for a depth up to site requirements ( for the purpose meant for taking up any work by owner ) including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, de watering of accumulated water from any source and keeping the surface dry for subsequent works and if required disposal or stacking of excavated material at undisputed place, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, ofc, electric overhead and underground cables etc. all complete. 103 painting on steel structures / skids / aboveground piping: painting of steel structures / skids / aboveground piping after surface preparation which are situated at various locations of city. scope includes removal of dust, grease and loosely adhering paint with wire brush, emery paper and cleaning with linen cloth. primer shall be high solid polyamine cured epoxy one. finish coat should be of epoxy paint of approved brand such as burger / narolac / asian paints. colour as per instruction of eic. 104 restoration 105 restoration of rcc / pcc road / area 106 restoration of damaged rcc / pcc road / area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 107 restoration of bitumin road / area 108 restoration of damaged bitumin road / area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 109 restoration of paver block area 110 restoration of damaged paver block area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 111 cathodic protection system 112 all works shall be carried out as per approved drawings & specifications. work shall include design / residual engineering, preparation of cp schematic drawing, supply, installation, testing & commissioning of complete cp system, all related civil work, including providing foundations, supply of all materials as specified in special conditions of contract, instruments, consumables, touch up epoxy paint as required, including supply of paint, tools, tackles, labour, transportation for satisfactory completion of work and as per the direction of engineer in charge. in addition to the items mentioned below the contractors scope shall include connecting the new pipelines to the existing pipelines / cathode points of tr units by means of jumpering / bonding. 113 25mm2 114 10mm2 115 6mm2 116 making cable to pipe connections: by thermit welding for following cables, including excavation for exposing pipe, removal of coating / wrapping, thermit welding, recoating of the area of weld by epoxy filling, holiday testing, backfilling, supply of all tools, tackles, consumables, thermit weld kits & labours for satisfactory completion of work. 117 6mm2 cables 118 10mm2 cables 119 25mm2 cables 120 supply & installation of test station as per drawings and technical specifications. work shall include all related civil works including foundation, termination of cables inside the test stations along with lugs & ferules sealing of cable entry space with bitumen compound, supply of all materials, consumables, tools, tackles etc. for satisfactory completion of work and as per direction of engineer in charge. 121 supply & installation of zinc anode at a depth of 1.5 2.0m on all type of soil alongwith 10m tail cable of 25mm2 high conductivity, tinned, stranded copper conductor, 650 / 1100v grade, xlpe insulated, armoured, pvc sheathed for grounding electrical surges in the pipeline at ht crossings. the work includes excavation, laying of zn anode of minimum 20 kg weight, backfilling and all related civil work, complete in all respects. the work shall also include anode to tail cable connection, cable laying and termination inside the test station. 122 supply & installation of mg anodes after pre packaged with chemical backfill as per drawing. the anodes will have to be buried at a depth of 1.5 to 2m on all types of soil at approved location. the work shall include all earth work, laying of anodes & cables in position and termination of cable inside test stations with lugs, shunt & variable resistors, supply of all tools, tackles, consumables, labours, transportation of materials etc. required for satisfactory completion of work as per direction of engineer in charge. 123 supply, installation, testing and commissioning of polarization cell ( solid state type ) 124 supply, installation, testing and commissioning of spark gap arrestors / surge diverter across insulating joints. 125 supply, installation, testing and commissioning of earth pits in all types of soils including soft rocks, as per specification direction of engineer in charge. 126 supply and installation of gi25x3 mm earth strips including bending, cutting, and jointing with suitable nut, blots and washers for connections with earthpit. 127 mdpe line works 128 disconnection of existing pe pipeline 129 excavation of pit suitable for work, disconnection of existing connection sizes upto 125mm of pe line during shut down ( to be arranged by owner ) from main / branch line by cold cutting / plugging by end cap of requisite size upto 125mm to be ( provided by owner ) through fusion wwelding, its testing including supply of all manpower, machneries & nitrogen gas for local purging etc. the work shall also include removal above ground fitting etc upto 125 mm from the premises of consumer and its shifting to stores as per eic 130 couplers / end cap mdpe ( pe 100 ) , size up to 125mm 131 elbows / bend mdpe ( pe 100 ) size upto 125mm 132 valve mdpe ( pe 100 ) upto 125mm...
36461075 tender for agc maintenance of lawn, hedge, trees, shrubs and flower beds etc in drm office compound, drm bungalow, officers colony bungalows, divisional railway hospital and station area of agc ( for 24 months ) ...
35791844 maintenance of trees, shrubs and lawn including balance development work of green belts in village astauli for three years, greater noida....
35791557 tender for providing of trees shrubs on internal road in sec 32 with two years maintenance for yea...
35791225 tender for transfer of carpet oil from hsd tank no.5 to hsd tank no.3 of fuel oil pump house and odl 01 to odl 2, cutting and unloading of grass / shrubs grown in tank area and ash disposal work...
35689381 tender for p/o trees shrubs on internal road in sec 32 with two years maintenance for yea wc horti....
35685637 miscellaneous items for preventing theft in tech / erp building in alttc, ghaziabad.ghaziabad ( for 6 months in fy 2023 24 ) . pruning, trimming, shaping of trees / shrubs ( ht 15 feet and above ) i / c removal of cut materials upto 50mt. lead, as per direction of officer in charge. t&p shall be arranged by the contractor. 2 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 3 providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using flats 30x6mm for diagonal braces and central cross piece 4 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 5 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture....
35684105 bids are invited for horticulture service maintenance based model lawn maintenance in the university campus; lawn maintenance in the university campus , horticulture service maintenance based model maintenance of tree and shrubs; maintenance of tree and shrubs , horticulture service maintenance based model maintenance of flower bed; maintenance of flower bed , horticulture service maintenance based model maintenance of ground cover complete; maintenance of ground cover complete , horticulture service maintenance based model maintenance of hedge; maintenance of hedge , horticulture service maintenance based model maintenance of potted plant; maintenance of potted plant...
35562265 transfer of carpet oil from hsd tank no.5 to hsd tank no.3 of fuel oil pump house and odl 01 to odl 2,cutting and unloading of grass/shrubs grown in tank area and ash disposal work...
35430247 tender for maintenance of trees shrubs and lawn in parks and internal road side in r and r area jewar bangar for two year yeida...
35393720 bids are invited for horticulture services lawn maintinance , hedge maininance , tree maintinance , shrubs regular weeding , potted plants regular weeding , jungle clearing , flowering bed regular weeding total quantity : 124402...
35384202 bids are invited for advance soil work area survey and demarcation work , work of shrub cleaning , pit marking work , sowing trench marking work , pit digging work , digging work of sowing trench in plateau area , digging work of sowing trench in ravine area , protection trench digging work for safety in plateau area , protection trench digging work for safety in ravine area , stone wall construction work for safety , pond construction work including cartage for soil conservation work , check dam construction work total quantity : 12...
35353121 tender for maintenance works of petty nature of building at stn bareilly under ge ( e ) bareilly. taking down existing gi tubing 15 mm dia & connections and refixing old servicable pipe with new all fittings and fixed to wall, ceiling or laid in floors complete all as specified and as directed. 2 taking down existing gi tubing 20 mm dia & connections and refixing old servicable pipe with new all fittings and fixed to wall, ceiling or laid in floors complete all as specified and as directed. 3 s&f gi tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing gi tubing 15 mm dia & connections complete all as specified and directed. 4 s&f gi tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing gi tubing 20 mm dia & connections complete all as specified and directed. 5 supply and fixing in repairs 15 mm bore float valve of high pressure ptmt with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situatedup to 16m height buildingincluding necessary ladder for climbing and including replacement of gi nipples and otherfittings if required complete all as specified and as directed. 6 all as per srl item no.5 here in before but 20 mm bore 7 s&f in repairs 10 litres capacity pvc valveless symphonic action type flushing cistern high / low level white complete with inlet, ball valve float and handle including brackets and telescopic down pipes and jointing with wc complete complete all as specified and as directed. 8 labour only for opening of air locks in toilets / baths and kitchen water pipe line but excluding fittings complete all as specified and as directed. 9 s&f in repairs brass sprindle for cp bib cock / piller cock / angle cock / concealed stop cock of various make 15mm dia complete all as specified and as directed. 10 supply only cp head for cp bib cock / piller cock / angle cock / concealed stop cock of various make suitable for 15mm bore pipe complete all as specified and as directed. 11 s&f in repairs bib tap pvc any colour / high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and as directed. 12 s&f in repairs pillar tap pvc any colour / high pressure, screwed down high pressure as specified for 15mm bore complete all as specified and as directed. 13 s&f in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as specified and directed. 14 s&f in repairs sink mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as specified and directed. 15 fixing in repairswash basin mixer / wall mixer / sink mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as specified and as directed. 16 s&f in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 nos.concealled stop cock & 2 nos. bib cock for each mixer complete all as specified and as directed. 17 s&f in repair toilet paper holder chromium plated fixed with cp screws complete all as specified and as directed. 18 s & f in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure fancy type of15 mm bore size with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed. 19 s&f in repairs cast copper alloy cp angle valve type stop cock suitable for 15mm bore pipe screwed at both endsor high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 20 s&f in repairs cast brass alloy type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 21 s&f in repairs cast copper alloy cp two way bib cock suitable for 15mm bore pipe screwed at both endsor high pressure with capstan head including dismanteling and making good the tiles if required complete all as specified and as directed. 22 s&f in repairs bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule including dismanteling and making good the tiles if required complete all as specified and as directed. 23 s&f in repairs bib taps of bore size 15mm, brass with butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 24 s&f in repairs bib taps of bore size 15mm, ci with butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 25 s&f in repairs brass cromium plated conceled stop cock of bore size 15 mm, in position conceledin walls / ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces including dismanteling and making good the tiles if required complete all as specified and as directed. 26 s&f in repairs 100 mm dia cp brass shower rose swivel type with extension cp rod 15mm dia and 300mm longwith connecting rod suitable for 15mm bore pipe complete all as specified and as directed. 27 s&f in repairs pvc connection 15mm size with ptmt nuts, of length 600mm complete all as specified and as directed. 28 s&f in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white ( minimum ) , with grating and union for discharge pipe including fixing plugs, bedding urinal against wall in cement mortar ( 1:2 ) etc. including cp waste fitting and pvc waste pipe complete all as specified and as directed. 29 s&f in repairs viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and cp waste fitting complete all as specified and as directed. 30 s&f in repairs vitreous china wash down water closetpedestal pattern ( ewc ) white excluding flushing cistern & inclwhite seat coverclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and as directed. 31 s&f in repairs vitreous china squatting pan orissa pattern size 580x440mm white with p or s trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc complete all as specified and as directed. 32 taking down the loosen ewc / whb / sink of any description and refixing the same with angle support to wall for whb and sink, for ewc screwing to floor and side joints filled with white cement for strengthening and making good complete all as specified and as directed. 33 s&f in repairs plastic seat cover white closed pattern with flat bottom and cover with cp hinges for ewc complete all as specified and as directed. 34 s&f in repairs cp waste coupling 32 mmdia for wash basin complete all as specified and as directed. 35 s&f in repairs cp waste coupling 40 mmdia for sink ( isi marked ) complete all as specified and as directed. 36 s&f in repairs 32 mmpvc flexible pipe for waste outlet with threaded socket at one end complete all as specified and as directed. 37 s&f in repairs 40 mm pvc flexible pipe for waste outletwith threaded socket at one end complete all as specified and as directed. 38 s&f in repairs cp health faucet special ( 1.5 mtr tube ) with hook for ewc complete all as specified and directed. 39 s&f in repairs brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed. 40 s&f in repairs soap dish stainless steel as approved by ge complete all as specified and as directed. 41 s&f in repairs gratingof 125 mm dia of stainless steel with or without waste hole complete all as specified and as directed. 42 s&f in repairs pvc ( swr ) pipe single socketed in any length with rubber ring joints, laid in floors 75mm dia complete all as specified and as directed. 43 s&f in repairs low density polyethylene pipes ( ldpe ) of pressure rating 6 kg / cm2 of40 mm dia borefor wash hand basin complete all as specified and as directed. 44 s&f in repairs pvc ( swr ) branch pieces, single ( single y ) equal or unequal or with parallel branches 75mm dia complete all as specified and as directed. 45 s&f in repairs for pvc ( swr ) bends, any radius, bore of pipe in 75mm with cement solvent in position complete all as specified and as directed. 46 s&f rotational moulded polethylene water tank of 500 ltrs capacity, white colour, isi marked ( cylindrical vertical with closed top with suitable size ofm s tasla with suitable locking system ) hoisted and fixed in position all as pacific ssr part i including dismantling of existing water tanks capacityn exc 500 ltr complete all as specified and as directed. 47 s&f rotational moulded polethylene water tank of 1000 ltrs capacity, white colour, isi marked ( cylindrical vertical with closed top with suitable size ofm s tasla with suitable locking system ) hoistedand fixed in position all as pacific ssr part i including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and as directed. 48 s&f in repairs stainless steel plate rack of size 31 x 30 x 10 with using stainless steel sheet of0.63mm thickness fixed with rawl plug and screw complete all as specified and as directed. 49 s&f in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed. 50 s&f in repairs pvc ( swr ) floor trap, plain with grating including jointing with solvent cement, trap with deep water seal and of heavy weight coated with tar / black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantled materials complete all as specified and as directed. 51 m&l to prevent leakage / seepage from roof area ( n exc 4 sqm ) shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing syatem @ 2kg / sqm at 1mm thickness urp admixed with cement in 1:1 propotion without waterin 1 coats of make dr fixit or equivelant. the shall be tested with ponding test by engr in charge. if any failure occoured that shall be re done without any extra cost within 24 hrs complete all as specified and as directed. 52 m&l to prevent leakage / seepage from nahani trap / floor trap including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementous water proofing system @ 2kg / sqm at 1mm thickness or urp admixed with cement in 1:1 propotion without water in1 coats of make dr fixit orequivelant. the shall be tested with ponding test by engr in charge. if any failure occoured that shall be redone without any extra cost with in 24 hrs complete all as specified and as directed. 53 taking down chowkats or frames not exceeding 1.5 sqm each with shutter ( without taking off shutter from the frame ) complete all as specified and as directed. 54 taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each with shutter ( without taking off shutter from the frame ) complete all as specified and as directed. 55 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube, suppling & fixing in opening as per specification & drawing complete all as directed. 56 s&f 30 mm thick factory made solid panel pvc door shutter 30mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails, m.s. frame shall be covered with heat moulded palin colour pvc `c channel heaving a pvc sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s frame wedded / sealed to the stiles, & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 57 s&f in repairs 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specifed as directed 58 s&f for 40mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 59 s&f 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles ( hollock ) , prepared to receive glass / gauge etc without sash bars, edges of framing plain cham fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in ssr part i ( 2009 ) section 8 and as per is 1003 ( part i ) kiln seasoned as per is 1141 and chemically pressure treated as per is 401 complete all as specified and as directed. ( note : s & f wire messshall be measured and paid for separately ) 60 repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring, and hinge, refixing shutter in same opening with all necessary repairs / refixing including replacement of damaged jointing cleats, glazing clips, rubber packing, aluminium beading, screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail complete all as specified and as directed. note ( i ) work shall be carried out in md qtrs / otm accns in different locations of ge ( east ) area as per site requirements upto 4 storieyed building ) ( ii ) hydrolic door closer / door spring if preplaced under separete items 61 all as per srl item no.60 here in before but aluminium windows of any type / mechanicium except ofwire mesh / glass shall be paid under separate item above the rates includes replacement of rollers / sliding arrangement / locking arrengments / any types of hinges. if during repalcement of wiremesh / glass window requires dismanteling of complete window with frames and shutters the same shall be carried out and the rates are deemed to included such provisions under this item and nothing shall be paid extra. 62 m&l for powder coated aluminium sliding window with anodized aluminium frame of3 track of size 92mmx32mmx 1.5mm thick, with sliding shutters ( 02 glass and 01 wirecloth ) with necessary channels ( top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick ) including glazing with tinted sheet glass panel 4.00mm thick and aluminum alloy wirecloth 004mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips, locking device one for each shutter, rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified and as directed.note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 63 m & l for providing aluminiium shutter with powder coated frame 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail , middle rail and bottom rail and style of size85 mm x 44.5 mm x 1.56 mm thickwith200 mm size powder coated2 nos with each leaf , heavy duty powder coated aluminium tower bolt 150mm long 2 nos per leaf, 3 nos heavy duty aluminium powder coated of size 125mm with each leafincluding 12 mm thick both side prelaminated particle board / 5.5 mm thick glass panein the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed. note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 64 s&f aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazingcleat and revolving arrangement of standard section of aluminiumincluding rubber packing, aluminium beadingor gasket forfor aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed aluminium wire clothetcall as specified and directed.note : if mentioned section are not available in market, then immediate next higher section shall be provided by contractor without any extra cost. 65 s&f in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of keys complete all as specified and as directed. 66 dismantling of existing aluminium door / window upto 4 sqm each complete all as specified and as directed. 67 s&f 150 mm aluminium anodised barrel tower bolts of extruded section, isi marked complete all as specified and as directed. 68 s&f 150 mmextruded aluminium alloy handles, fabricated type, anodised, isi marked complete all as specified and as directed. 69 s&f 100 mm ms butt hinges medium weight cold rolled mild steel compete all as specified as directed by engineer in charge 70 s&f 300 mm longand mild steel chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 71 s&f mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by engineer in charge ( work shall be carried out in md qtrs / otm accns in different locations ofof aor ge ( east ) bareilly ) 72 s&f in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti complete all as specified and as directed. 73 m&l two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and as directed. 74 s&f in repairs floor door stoppers double leggedof aluminium alloy body & tounge aluminium anodisedalloy with rubber fixed with steel screws on the door frame of size 150 mm long complete all as specified and as directed. 75 s&f in repairsaluminium anodized hasp & staple saftey type with mild steel pin hinge including bolt to hinge plate fixed with screws of 100 mm size complete all as specified and as directed. 76 s&f in repairs 50 mm aluminium anodised barrel tower bolts of extruded section, isi marked complete all as specified and as directed. 77 s&f in repairs 150 mmextruded aluminium alloy handles, fabricated type, anodised, isi marked complete all as specified and as directed. 78 s&f in repairs 100 mm ms butt hinges medium weight cold rolled mild steel complete all as specified and as directed. 79 s&f in repairs 300 mm longand mild steel chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 80 s&f in repairs helical door spring 250mm size with roller and roller plates of mild steel incl welding to angle iron plate or fixing with wooden / steel chowkhats as required and as specified including necessary welding where ever required complete all as specified and as directed. 81 s&f of loosed window glasses with oil putty complete with making good complete, window not exceeding 1.50 sqm complete all as specified and as directed. 82 s&f in repairs 3 mm thick figuredglass ordinary quality and size in any type of frames and glazing with oil putt ( or beading ) in square exc. 0.5 sqm each including hacking out old glasses complete all as specified and as directed. 83 s&f for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane for steel / aluminium windows including hacking out old glasses complete all as specified and as directed. 84 s&f in repairs gi wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing ms beads and ss screws complete all as specified and as directed. 85 s&f in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or pre painted wooden beeding patti complete all as specified and directed. 86 s&f in repairs aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for aluminium window and ventilator complete all as specified and directed. 87 m&l for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal towelded exc 6mm but n exc 9mmfor steel windows, ventilators door frames, door hinges, door springs etc complete all as specified and as directed. 88 s&f in repairs stainless steel work as gde 304 ss in railing / swimming pool ladder / grab bar / supports including all fitting and fixing complete all as specified and directed. 89 s&f in repairs rubber based door bottom strip with aluminium angle not less than 25x25mm including fixing arrangement with screws properly & all as per manufacturers instruction complete all as specified and directed. 90 m&l for drilling holes for pipes etc in cadappa / graniteincluding rcc slab nexc 25mm dia and nexc 100mm depth complete all as specified and as directed. 91 s&f in repairs ss 25 mm dia bore and 1.5 mm thcik fancy type curtain rod fancy type brackets cut to length as required in sigle or doble layer of approved colour complete all as specified and as directed. 92 s&f in repairs ss fancy type end balls fixed to ss rod as approved by engr in charge 93 s&f in repairs 12mm thick toughened glass making provision of hole for all ss for glass fitting including itching logo as approved, edge polishing and drilling hole for fittings as in railing complete all as specified and as directed. 94 all as per srl item no.93 here in before but including ss patch fittings for single and double leaf in door 95 s&f in repairs double action floor spring hydraulically regulated made isi marked of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 96 supply and fixing 18 long ss handle set for door complete all as specified and as directed. 97 s&f in repairs ss lock for toughened glass door set complete all as specified and as directed. 98 taking down cement plasteron brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed., 99 m&l for 15mm thick rendering on brick / concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick / concrete surface in patch workin cm 1:4 and finishing fair and even without using extra cement with including using 2% integral water proofing compound by wt of cement note: ( i ) cost of water proofing compound deemed to be included in item ) ( ii ) the rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m includingall safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible. 100 all as per srl item no.99 here in before but 5 mm thick rendering in cement plaster 1:4 on ceiling in patches 101 m & l for preparing plasteredsurfaces of wallsand applying three coats of white wash complete all as specified and as directed. 102 m&l preparation of new plastered surface and applying 3 coats of white wash on ceiling complete all as specified and as directed. 103 m&l for filling floor / glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly complete all as specified and as directed. 104 demolition of cement concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) and removing the rubbish complete all as specified and as directed. 105 m&l for 25 mm thick plain cement concrete 1:2:4, type b 1 ( using 20 mmgraded stone aggregate ) as in sub bases, sub floors complete all as specified and as directed. 106 m&l for vitrified glazed ceramic coloured / double charged / ultra charged tiles 9 10 mm thick square / rectangular ) polished area of each tile 800 mmx 800 mm / 600mmx1200 mm size approved by ge in floors etc. set and jointed in neat cement slurry and pointed in matching colour5 mm thick epoxy filling in between tiling over andincluding 15mm thick screed bedin cm 1:6 complete complete all as specified and as directed.note : engr in charge will select sample from latest catalouge. 107 dismantling, floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 108 m&l glazed ceramic coloured tiles ( square / rectangular ) with borderin vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry andpointed in white cementor colouredcement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. note : engr in charge will select sample from latest catalouge. 109 m&l providing non skid glazed ceramic tiles coloured 7 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in cm 1:6 complete all as specified and as directed. note : engr in charge will select sample from latest catalouge. 110 m&l 75 mm thick pcc 1:4:8, type d 2 ( using 40mm graded stone aggregate ) as in sub base floor / pavings complete all as specified and directed. 111 m&l pcc 1:1½:3, type a 1 ( using 20 mm graded stone aggregate ) as in floors, surfaces finished fair and even complete all as specified and as directed. 112 m&l forming contraction ( dummy ) joints 65mm deep x 10mm wide, filled with sealing compound grade a complete all as specified and directed. 113 m&l in repairs for machine pressed pre cast concrete interlocking coloured paver block, glossy finish and shape and size conforming to is 15658 2006 of 100 mm thickness m 50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. 114 m&l for making duct for window ac in wall / window with outside ms grill of squre / round bar of 12 mm dia and inside sliding arrangement of acrylic sheet sliding type including demolition of brick work, plastering and making good the surfaces with cement plaster andplaster patta 50 mm wide all over opening to avoid rain water inside from external side and paint touchup including removal of debris up to 50 m 115 m&l for removing of tree routs, shrubs and bushes from wall surface / roof top / chajjas up to 15 m height including repairing of cracks in cement mortor 1:3in crarcked surfaceand making good the surface matching with existing surface including all required ladder and cosider allsaftey measures upto ht 15 mts of bldgetc completed and removal of shrubs up to 50 m distance complete all as specified and directed. 116 removing of old building materials & dabries of any types. the rate included in the tractor trolly ( size 3300mm x 1800mm x 450mm ) i.eloading, unloading and stacking / sprading etc outside of md land with own arrangement by contractor complete all as specified and directed. 117 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 118 s&f steel work in tubular trusses of design as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using erw or induction butt welded tubes confirming to is 116 1979 grade ( medium grade ) complete all as specified and as directed. 119 m&l framed work such as grills in ornamental design as approved , gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe 410 0 or fe 310 0 includingms powder coating togrill / guard bars of approved colors for windows etc complete all as specified and as directed. 120 m & l two coats of synthetic enamel paint on steel surfaces over one coat of red oxide or zinc chrome primer, of any description over 10cm width or girth including preparation of new or previously untreated surfaces of steel complete all as specified and as directed. 121 dismantling asbestos cement / frp sheet / gi sheet ( corrugated ted, semi corrugated, etc. ) sheets in roof coverings up to height 10m and taking care of earthing strip and refixing complete all as specified and directed. 122 s&f pre coated galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws on each sheet / each support rubber lining and complete all as specified and as directed. 123 s&f 2mm thick coloured fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed. 124 dismantling wall / ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover complete all as specified and as directed. 125 s&f in repairs 5mm thick acrylic sheet red / blue colour or as approved, size n exc 0.36 sqm ( square / rectrangular ) duly coloured writing ( block / qtr no ) as approved size and thickness and fixing arrengment on wall upto 6mtr height complete all as specified and as directed. 126 m&l for 10 15 mm thick pop false ceiling with approved pattern and design on gi chicken wire mesh of aperture 10 mm anddia of wire 1. mm fixed on frame workpanel size 600 x 600 mm made of gichannel of standard section as approved of thickness not less than 1.25 mm thick including offsets at diifrent level as per designfixed to required geomatric shape at diffrent level fixed in approved design pattern complete with all necessary arrangement and tying with roof member with suspended of 8 mmdia round bar with required fixing arrangements spacing of suspenders shall not be more than 1.0 mtr on either side of each other all as specified and directed. the rate shall be inclusive of making of coves, moldings, offsets, cornices, domes, angular shapes, curves of any shapes, connecting to wall, projectionswith including finishing joint with tape & jointing compound ceiling including two coat of plastic emulsion paint over one coat ofprimer all fixing shall be done as directed. note: ( i ) rate is inclusive of all fittings, fixtures, scaffolding, t&p, safety measures at site. ( ii ) design and pattern as approved by engr in charge. 127 s&f fix in repairsglass mirror of size exc1.0 sqm but n exc 2.0 sqm including ornamnetal edges border on sides of 2 to 3 inch wide and mirrors having pvc / ply wood back of 6 mm thick including all fittings and fixtures required to fixing in ss brackets / studsat allcorners on wallsetc, making holes if required complete all as specified and as directed. 128 demolition of brickwork or stone / boulder masonry, built in cementmortar includin gall quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. 129 m&l brick work with flyash modular bricks, straight or curved on plan exc 6m mean radius, built incm1 : 6 complete all as specified and as directed. 130 s&f in repairs of wooden flooring made of kiln seasoned treated teak wood finished with size 195mm x 8.0mm thick and in random length in tounge and groove shape andcomplete all as specified and as directed.note: make, colour and design of wooden flooring shall be approved by ge...
35311464 tender for m/o trees shrubs and lawn in park and internal road side...
35303496 tender for providing of trees shrubs in parks of pocket c sec 20 with two year maintenance for yea....
35278466 tender for maintenance of trees shrubs and lawan on road side and parks of rps 02 and gh 06 houses scheme campus in sector 22d for two year yea...
35264933 p/o trees shrubs in parks of pocket d sector 20 with two year maintenance yea...
35264917 maintenance of trees and shrubs in internal roads in sec 18 pocket 2 ( block 2b ) for two year maintenance for yea...
35260547 tender for maintenance of trees shrubs on 60mtr wide road and 50mtr wide green belt from ch.22.70km to 23.70km for two year yea...
35213219 tender for p/o trees shrubs in parks of pocket c sec 20 with two year maintenance for yea. wc horti...
35188337 tender for caring & maintenance of lawn hedge, shrub, trees, flower beds ( horticulture work ) in bunglows, service building, hospitals, clubs, rest house, auditorium, community hall at varanasi, banaras, varanasi city and sarnath station for two year...