Northern Railway - Uttar Pradesh

34113750 supply of split type air conditioner ( 2.0 ton ) split type air conditioner ( 2.0 ton ) , split type air conditioner ( 2.0 ton ) , operation on 230 volts ac, 50 hz, fitted with rotary compressor ( non cfc refrigerant ) cooling capacity nominal ( kcl / hr ) : 5800, cooling cap ( min ) guaranteed kcl / hr ) : 5500, min room discharge air flow ( cub / m / h ) : 800 eer ( w / w ) : as per bee 2015 or latest, bee star rating 3 or above ( complete with all accessories ) . the unit shall be conforming to is 1391 ( part 2 ) 1992 with amdt. no. 1 to 4 or latest as per attached specification....

Northern Railway - Uttar Pradesh

34085164 supply of window mounted unitary room air conditionerwindow mounted unitary room air conditioner, window mounted unitary room air conditioner fitted with rotary compressor ( 1.5 ton ) operation on 230 volt ac, 50 hz, ( non cfc refrigerant ) cooling capacity nominal ( kcl / hr ) : 4500, cooling capacity ( min ) guaranteed ( kcl / hr ) : 4275, min room discharge air flow ( cub mt / hr ) : 700, eer ( w / w ) as per / bee 2015 or latest or star rating 3 or above. the unit shall be to is: 1391 ( part 1 ) 1992 ( reaffirmed 2004 ) with amdts no. 1 to 3 or latest as per attached specification. make: carrier, hitachi, o general, minstubushi, blue star, lg , voltas, lloyd, samsung or similar, material to be inspected by m / s rites....

North Central Railway - Uttar Pradesh

34019836 supply of window ac 1.5 ton capacitywindow ac 1.5 ton capacity, supply, fixing, connecting & commissioning of window type ac unit, capacity 1.5 ton, rotary compressor , remote operation, voltage 230 volts + 10%, single phase, 50 hz, nominal cooling capacity 4500 kcal / hr, copper coil, working temperature 52 *c, ecofriendly refrigerent unit, conf. to is:1391 with latest amendments upto date, star rating 5 of make o general, daikin, hitachi, voltas or similar. note: firm shall submit their bid with mention make / model. => limited...

Bharat Heavy Electricals Limited - Uttar Pradesh

34010289 e auction for miscellaneous scrap e waste scrap (segregation not allowed) (for only pcb certified buyers), rotary compressor of cooling capacity 1.5 tr/2.0 tr used in split air conditioner, scrap colour tv make bpl limited ktr 18ta3 (for only pcb certified buyers), old empty drum (210 ltr) (segregation not allowed) at herp,varanasi...

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

33990562 supply of air condition for 2x500mw, dtps anpara. , split air conditioner 2 ton technical specification: 1. ac drain pipe length: 5 mtr. 2. ac pipe material ( from indoor to outdoor unit ) and it’s length: copper and 3 mtr. 3. type of gas used in ac: r 32. 4. material used in compressor coil: copper. 5. bee rating of ac with year: 3 star 2021. 6. compressor type: rotary compressor. 7. filter type: dust filter. 8. anti corrosive coating required or not: no. 9. rated cooling capacity: 6200w. 10. power supply rating: 230v, 50hz. 11. noise level – indoor: 40 46 db. 12. ambient temperature for working: 52 0c 13. ac must be any of following standard make ( i ) . voltas limited, ( ii ) . carrier air conditioner company, ( iii ) . o general ac, ( iv ) . daikin industries ltd, ( v ) . hitachi home and life solution ( india ) , ( vi ) . lg electronics....

Directorate of Medical Education and Training - Uttar Pradesh

33706903 bids are invited for window ac service without pump , window ac service with pump , hiwall service with pump , window ac gas charging , hiwall unit gas charging with pressure testing , copper piping with insulation 1point5 tr 2 tr , wiring with indoor to outdoor unit , running capacitor 50 mfd , stabilizers repair minor , pcb repair window split , single phase contactor , window ac motor repair , hiwall ac motor repair , drain pipe with insulation , rotary compressor 1 tr , rotary compressor 1point5 tr , rotary compressor 2 tr , cassette ac service charge , cassette ac gas charge 2 r , cassetteac gas charge 3r , cassette ac gas charge 4r , outdoorindoor fan motor repair , indooeachutdoor pcb , ductinsulation 9mm , ahu filter 2 x 2 , ahu 3 phase motor repairwith fitting , ahu coil , ahu canvas , ahu belt , old windowac installation dismantle , split ac installation dismantle ,window and split ac case , window ac cooling coil andcondenser coil , split ac condenser and cooling coil , splitac indoor pcb new change , outdoor pcb total quantity : 734...

Northern Railway - Uttar Pradesh

33679649 supply of split type air conditioner ( 2.0 ton ) .split type air conditioner ( 2.0 ton ) ., split type air conditioner ( 2.0 ton ) , operation on 230 volts ac, 50 hz fitted with rotary compressor ( non cfc refrigerant ) cooling capacity nominal ( kcl / hr ) : 5800, cooling cap ( min ) guaranteed ( kcl / hr ) : 5500 min, room discharge air flow ( cub / m / h ) : 800 eer ( w / w ) as per bee 2015 or latest, bee star rating 3 or above ( complete with all accessories ) . the unit shall be conforming to is: 1391 ( part 2 ) 1992 with amdt. no. 1 to 4 or latest. as per attached specification....

Northern Railway - Uttar Pradesh

33054697 bids are invited for window air conditioner fitted with rotary compressor 1.5 ton operation on 230 volt ac 50 hz cooling (q3) total quantity : 28...

Department of Defence Production - Uttar Pradesh

32999768 bids are invited for 1 np17003935 rotary compressor of 1.5 tr 2 np17003936 rotary compressor of 2.0 tr 3 np17004862 side thimble ( heavy duty ) 4 np17004863 straight thimble, heavy duty 5 np17005004 blower for window ac 6 np17005000 fan motor for window ac 7 np17005001 fan blade for window ac 8 np17005003 pcb / display for window ac 9 np17005002 copper condensing coil for window ac 10 np17004562 capacitor 4 mfd 440 volts 11 np17004893 capaciter 6, mfd 440v 12 np17004892 capaciter 36, mfd 440v 13 np17002204 motor running capacitor 45 mfd+ / 5%, 44 volts ac con. to is 2993 14 np17004561 capacitor 50 mfd 440 volts 15 np17004891 capaciter 55 mfd 440v 16 np17004890 capaciter 60 mfd 440v 17 np17004665 pvc flex.drain pipe d1 / 2 inch x l1.5mtr lemgth for split ac 18 np17004885 copper pipe 1 / 4inch 19 np17004886 copper pipe 3 / 8inch 20 np17004884 copper pipe 1 / 2inch 21 np17004883 copper pipe 5 / 8inch 22 np17004881 flair nut 1 / 4inch 23 np17004879 flair nut 3 / 8inch 24 np17004882 flair nut 1 / 2inch 25 np17004880 flair nut 5 / 8inch 26 np17004898 ac drier filter 1.5tr 27 np17004897 ac drier filter 2tr 28 np17004888 contacter single phase 220 v 29 np17004878 service valve 1 / 4inch 30 np17004876 service valve 3 / 8inch 31 np17004877 service valve 1 / 2inch 32 np17004875 service valve 33 np16000357 pvc insu.copper cable 0.75x3core, 24 / 0.21100 volts, length of 100mtr per roll 34 np17004896 cable trisheet 1, sqmm, copper 35 np17004894 cable trisheet 1.5 sqmm, copper 36 np17004895 cable trisheet 2.5 sqmm, copper 37 np16000209 self adhesive pvc elec.tape, width 1.8cmxthickness 0.12mmx9 mtr roll tolerance 5 percent in thickness & width, conf. to is7809...

Northern Railway - Uttar Pradesh

32990417 supply of split type air conditioner 02 ton.split type air conditioner 02 ton.,split type air conditioner 02 ton, operation on 230 volts ac, 50 hz, fitted with rotary compressor (non cfc refrigerant) cooling capacity nominal (kcl/hr): 5800, cooling cap (min) guaranteed kck/hr): 5500, min room discharge air flow (cub/m/h) : 800 eer (w/w): as per bee 2015 or latest, bee star rating 3 or above (complete with all accessories). the unit shall be conforming to is:1391 (part 2) 1992 with amdt. no. 1 to 4 or latest. , split type air conditioner 02 ton, operation on 230 volts ac, 50 hz, fitted with rotary compressor (non cfc refrigerant) cooling capacity nominal (kcl/hr): 5800, cooling cap (min) guaranteed kck/hr): 5500, min room discharge air flow (cub/m/h) : 800 eer (w/w): as per bee 2015 or latest, bee star rating 3 or above (complete with all accessories). the unit shall be conforming to is:1391 (part 2) 1992 with amdt. no. 1 to 4 or latest....

North Eastern Railways - Uttar Pradesh

32981455 supply of portable air conditioner working on 230v, 50hz ac supply , air flow 350m3/hr with dust filter, led panel display, with cooling capacity 3350w, rotary compressor with copper condenser coil, two way swing with with de humidification facility with 1 year warranty on product and 5yr on compressor.portable air conditioner working on 230v, 50hz ac supply , air flow 350m3/hr with dust filter, led panel display, with cooling capacity 3350w, rotary compressor with copper condenser coil, two way swing with with de humidification facility with 1 year warranty on product and 5yr on compressor.,portable air conditioner working on 230v, 50hz ac supply , air flow 350m3/hr with dust filter, led panel display, with cooling capacity 3350w, rotary compressor with copper condenser coil, two way swing with with de humidification facility with 1 year warranty on product and 5yr on compressor....

Northern Railway - Uttar Pradesh

32884795 supply of window mounted unitary room air conditionerwindow mounted unitary room air conditioner,window mounted unitary room air conditioner fitted with rotary compressor (1.5 ton) operation on 230 volt ac, 50 hz, (non cfc refrigerant) cooling capacity nominal (kcl/hr): 4500, cooling capacity (min) guaranteed (kcl/hr): 4275, min room discharge air flow (cub mt/hr): 700, eer (w/w) as per /bee 2015 or latest or star rating 3 or above. the unit shall be to is: 1391 (part 1) 1992 (reaffirmed 2004) with amdts no. 1 to 3 or latest. make: carrier, hitachi, o general, minstubushi, blue star, lg , voltas, lloyd, samsung or similar. material to be inspected by m/s rites....

Northern Railway - Uttar Pradesh

32844462 supply of split type air conditioner (2.0 ton)split type air conditioner (2.0 ton),split type air conditioner (2.0 ton), operation on 230 volts ac, 50 hz, fitted with rotary compressor (non cfc refrigerant) cooling capacity nominal (kcl/hr): 5800, cooling cap (min) guaranteed kcl/hr): 5500, min room discharge air flow (cub/m/h) : 800 eer (w/w): as per bee 2015 or latest, bee star rating 3 or above (complete with all accessories). the unit shall be conforming to is 1391 (part 2) 1992 with amdt. no. 1 to 4 or latest as per attached specification....

Northern Railway - Uttar Pradesh

32775037 supply of split type air conditioner (2.0 ton)split type air conditioner (2.0 ton),split type air conditioner (2.0 ton), operation on 230 volts ac, 50 hz, fitted with rotary compressor (non cfc refrigerant) cooling capacity nominal (kcl/hr): 5800, cooling cap (min) guaranteed kcl/hr): 5500, min room discharge air flow (cub/m/h) : 800 eer (w/w): as per bee 2015 or latest, bee star rating 3 or above (complete with all accessories). the unit shall be conforming to is 1391 (part 2) 1992 with amdt. no. 1 to 4 or latest...

Ministry Of Power - Uttar Pradesh

32740786 bids are invited for supply installation of 5 star 1.5 t split air conditioning unit with rotary compressor including outdoor stand heavy duty as pe technical specifications , supply installation of 5 star 2.0 t split air conditioning unit with rotary compressor including outdoor stand heavy dutyas pe technical specifications , supply installation of 2 t inverter cassette ac unit comprising of inverter compressor, dx evaporatorcoil, air cooled condensers with outdoor stand heavy dutyas pe technical specifications , supply installation of 4tinverter cassette ac unit comprising of inverter compressor,dx evaporator coil, air cooled condensers with outdoorstand heavy duty as pe technical specificationssupply installation and commissioning of split and cassette total quantity : 83...

Directorate of Medical Education and Training - Uttar Pradesh

32722304 bids are invited for window ac service without pump , window ac service with pump , hiwall service with pump , window ac gas charging , hiwall unit gas charging with pressure testing , copper piping with insulation 1point5 tr 2 tr , wiring with indoor to outdoor unit , running capacitor 50 mfd , stabilizers repair minor , pcb repair window split , single phase contactor , window ac motor repair , hiwall ac motor repair , drain pipe with insulation , rotary compressor 1 tr , rotary compressor 1point5 tr , rotary compressor 2 tr , cassette ac service charge , cassette ac gas charge 2 r , cassetteac gas charge 3r , cassette ac gas charge 4r , outdoorindoor fan motor repair , indooeachutdoor pcb , ductinsulation 9mm , ahu filter 2 x 2 , ahu 3 phase motor repairwith fitting , ahu coil , ahu canvas , ahu belt , old windowac installation dismantle , split ac installation dismantle ,window and split ac case , window ac cooling coil andcondenser coil , split ac condenser and cooling coil , splitac indoor pcb new change , outdoor pcb total quantity : 734...

Department of Defence Production - Uttar Pradesh

32498720 bids are invited for compressor for ac 1.5 ton, rotary compressor 2.0 tonauto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( for anunlimited time ) total quantity : 80...

Directorate of Medical Education and Training - Uttar Pradesh

32482976 bids are invited for window ac service without pump , window ac service with pump , hiwall service with pump , window ac gas charging , hiwall unit gas charging with pressure testing , copper piping with insulation 1.5 tr 2.0 tr , wiring with indoor to outdoor unit , running capacitor 50 mfd , stabilizers repair minor , pcb repair window split , single phase contactor , window ac motor repair , hiwall ac motor repair , drain pipe with insulation , rotary compressor 1.0 tr , rotary compressor 1.5 tr , rotary compressor 2.0 tr , cassette ac service charge , cassette ac gas charge 2.0 r , cassetteac gas charge 3.0r , cassette ac gas charge 4.0r ,outdoor or indoor fan motor repair , indooeachutdoor pcb ,duct insulation 9mm , ahu filter 2 x 2 , ahu 3 phase motorrepair with fitting , ahu coil , ahu canvas , ahu belt , oldwindow ac installation dismantle , split ac installationdismantle , window or split ac case , window ac coolingcoil and condenser coil , split ac condenser and cooling coil, split ac indoor pcb new change , outdoor pcb total quantity : 36...

Northern Railway - Uttar Pradesh

32326405 supply of hermetically sealed compressor.hermetically sealed compressor.,hermetically sealed compressor isi mark (rotary compressor of capacity 1.5 ton suitable to work on 230 volt ac 50 hz operating on single phase supply compressor shall be conforming to is: 10617/1983....

Northern Railway - Uttar Pradesh

32176540 supply of hermetically sealed compressor.hermetically sealed compressor.,hermetically sealed compressor isi mark (rotary compressor of capacity 1.5 ton suitable to work on 230 volt ac 50 hz operating on single phase supply compressor shall be conforming to is: 10617/1983....

Northern Railway - Uttar Pradesh

32080278 supply of hermetically sealed compressor.hermetically sealed compressor.,hermetically sealed compressor isi mark (rotary compressor of capacity 1.5 ton suitable to work on 230 volt ac 50 hz operating on single phase supply compressor shall be conforming to is: 10617/1983....

Northern Railway - Uttar Pradesh

32046763 supply of isi marked hermetically sealed compressor.isi marked hermetically sealed compressor.,isi marked hermetically sealed compressor (rotary compressor ) of capacity 2.0 on suitable to work on 230 volt ac,50 hz operating on single phase supply the compressor shall be conforming to is:10617/1983 and cee/nr spec.no. 74/elect/p/91....

Bharat Heavy Electricals Limited - Uttar Pradesh

31878354 tender for rotary compressor for 1.5 ton air conditioner ( split type ) and rotary compressor for 1.5 ton air conditioner ( window type ) , rotary compressor for 1.5 ton air conditioner ( split type ) make of compressor: toshiba / carrier / copeland / voltas / hitachi / highly , rotary compressor for 1.5 ton air conditioner ( window type ) make of compressor: toshiba / carrier / copeland / voltas / hitachi / highly...

Bharat Heavy Plate And Vessels Limited - Uttar Pradesh

31875939 rotary compressor for 1.5 ton air conditioner rotary compressor for 1.5 ton air conditioner (split type) and rotary compressor for 1.5 ton air conditioner (window type) , rotary compressor for 1.5 ton air conditioner (split type) make of compressor: toshiba / carrier / copeland / voltas / hitachi / highly , rotary compressor for 1.5 ton air conditioner (window type) make of compressor: toshiba / carrier / copeland / voltas / hitachi / highly...

Bharat Heavy Electricals Limited - Uttar Pradesh

31527089 tender for supply of rotary compressor cooling capacity 1.5 tr tender for supply of rotary compressor cooling capacity 1.5 tr , rotary compressor cooling capacity 1.5 tr ( 18000 btu/hr +/ 5 %) make: highly model: sh 295 ry/ hitachi model: shy33mc / toshiba ph310x2cs or equivalent in lg/ copeland/ daikin/ danfoss/ carrier/ whirlpool make...

Sanjay Gandhi Postgraduate Institute of Medical Sciences - Uttar Pradesh

30649752 rate contract (rc) for service / maintenance / spare parts of air conditioners and accessories at cbmr, lucknow 1 1 wet servicing of ductable type air conditioner unit 2 1.1 same as item as item code 1 but for 4.0 tr 3 1.2 same as item as item code 1 but for 5.5 tr 4 2 wet servicing of split type air conditioner units(non invertor/invertor type) 5 2.1 same as item as item code 2 but for 1.0 tr 6 2.2 same as item as item code 2 but for 1.5 tr 7 2.3 same as item item code 2 but for 2.0 tr 8 3 wet servicing of window air conditioner unit 9 3.1 same as item code 3 but for 1.5 tr 10 3.2 same as item code 3 but for 2.0 tr 11 4 leakage testing and gas charging of ductable split 2tr. single compressor unit 12 5 leakage testing and gas charging of 4.0 tr ductable unit 13 5.1 same as item code no 5 but for 5.5 tr 14 6 leakage testing and gas charging of split ac unit(non invertor/invertor type) 15 6.1 leakage testing and gas charging of 1.0 tr 16 6.2 leakage testing and gas charging of 1.5 tr 17 6.3 leakage testing and gas charging of 2.0 tr 18 7 leakage testing and gas charging of 2tr. window ac 19 8 leakage testing and gas charging of 1.5tr window ac 20 9 providing and fixing of 2.0 tr rasip compressor 21 9.1 same as item code 9 but of 1.5tr 22 10 same as item code 9.1 but of 1.0 tr 23 11 providing and fixing of new 2.0 tr capland compressor 24 12 providing and fixing of new 1.5 tr. rasip compressor 25 12.1 same as item code 12 but for 01 tr. rasip compressor 26 13 providing and fixing of new 2.0 tr. rotary compressor 27 13.1 same as item code 13 but for 1.5 tr. rotary compressor 28 13.2 same as item code 13 but for 01 tr. rotary compressor 29 14 new remote circuit plate, compatible of existing ac unit of approved make and model 30 14.1 same as item code 14 but for 1.5 tr window ac 31 14.2 same as item code 14.1 but for 2.0 tr 32 14.3 same as item code 14 but for 1.0 tr spilt ac(non invertor/invertor type) 33 14.4 same as item code 14.3 but for 1.5 tr 34 14.5 same as item code 14.3 but for 2.0 tr 35 15 repairing of remote circuit plate 36 15.1 same as item code 15 but for 1.5 tr window ac 37 15.2 same as item code 15 but for 2.0 tr window ac 38 15.3 same as item code 15 but for 1.0 tr spilt ac(non invertor/invertor type) 39 15.4 same as item code 15 but for 1.5 tr spilt ac(non invertor/invertor type) 40 15.5 same as item code 15 but for 2.0 tr 41 16 repairing of condensing fan motor with replacement of shaft and balring with lathe work of 1.5 tr split unit(invertor/non invertor) /window ac motor 42 16.1 same as item code 16 but for 1.0 tr split type (invertor/non invertor) ac unit 43 16.2 same as item code 16 but for 2.0 tr split unit(invertor/non invertor) /window ac motor 44 17 repairing of condensing fan motor and indoor cooling unit blower motor of ductable split unit with replacement of ball baring, shaft and lathe work 45 18 repairing of cooling unit blower motor with replacement of ball baring shaft and lathe work of 2.0 tr split unit(for invertor/non invertor type unit) 46 18.1 same as item code 18 but for 1.5 tr 47 18.2 same as item code 18 but for 1.0 tr 48 19 repairing of window ac fan motor with replacement of ball baring, shaft and lathe work 49 20 rewinding of ductable split condensing fan motor and cooling unit blower motor 50 21 rewinding of condensing fan motor of 2.0 tr split unit(invertor/non invertor type) 51 21.1 same as item code 21 but for 1.5 tr 52 22 rewinding condensing fan motor of 1.0 tr split unit(invertor/non invertor type) 53 23 rewinding of cooling unit blower motor of split unit 2.0 tr(invertor/non invertor type) 54 23.1 same as item code 23 but for 1.5 tr 55 23.2 same as item code 23 but for 1.0 tr 56 24 rewinding of window ac fan motor 57 25 providing and fixing of new condensing unit motor for 4.0 tr ductable unit 58 26 provind and fixing of new cooling unit motor of 4.0 tr ductable unit 59 27 same as item code 25 but for 5.5 tr ductable unit 60 27.1 same as item code 26 but for 5.5 tr ductable unit 61 28 providing & fixing of new condensing fan motor of 2.0 tr split unit (invertor/non invertor type) 62 28.1 same as item code 28 but for 1.5 tr 63 28.2 same as item code 28 but for 1.0 tr 64 29 providing & fixing of window ac new fan motor 1.5 tr 65 29.1 same as item code 29 but for 2.0 tr 66 30 providing & fixing of new blower motor in cooling unit of split unit 2.0 tr 67 30.1 same as item code 30 but for 1.5tr 68 30.2 same as item code 30 but for 1.0 tr 69 31 providing & fixing of new fan blade of condensing unit, 4.0 tr ductable unit 70 31.1 same as item code 31 but for 5.5 tr 71 31.2 same as item code 31 but for 2.0 tr, split unit 72 31.3 same as item code 31.2 but for 1.0 tr 73 31.4 same as item code 31.2 but for 1.5 tr 74 31.5 same as item code 31.2 but for 1.5 tr window ac 75 31.6 same as item code 31.2 but for 2.0 tr window ac 76 32 proving & fixing of new air blower in cooling unit of 1.0 tr split ac 77 32.1 same as item code 32 but for 1.5 tr 78 32.2 same as item code 32 but for 2.0 tr 79 33 providing & fixing of capilliary and gas filter 80 34 providing and fixing of running capacitor 25 mfd 81 34.1 same as item code 34 but for 30 mfd 82 34.2 same as item code 34 but for 36 mfd 83 34.3 same as item code 34 but for 40 mfd 84 34.4 same as item code 34 but for 45 mfd 85 34.5 same as item code 34 but for 50 mfd 86 35 providing & fixing of starting capacitor 80 mfd 87 35.1 same as item code 35 but for 100 mfd 88 35.2 same as item code 35 but for 120 mfd 89 36 providng and fixing of new starting relay 90 37 proving and fixing of new fan capacitor 1.5 mfd 91 37.1 same as item code 37 but for 2 mfd 92 37.2 same as item code 37 but for 3 mfd 93 37.3 same as item code 37 but for 4 mfd 94 37.4 same as item code 37 but for 5 mfd 95 37.5 same as item code 37 but for 6 mfd 96 37.6 same as item code 37 but for 8 mfd 97 37.7 same as item code 37 but for 10 mfd 98 37.8 same as item code 37 but for 12 mfd 99 38 providing & fixing of new approved make thermo stat for window ac 100 39 providing & fixing of new approved make selector switch of window ac 101 40 providing & fixing of new approved make single step contactor 102 41 providing & fixing of new air filter of approved make or same as in existing machine 103 42 installation of window ac by carpenter with wood and ply 104 43 copper pipe fitting (1/2 insulation lead) 105 44 copper pipe fitting (1/4, insulation lead) 106 45 copper pipe fitting (5/8 insulation lead) 107 46 copper pipe fitting (1/4 insulation lead) 108 47 copper pipe 3/8 with insulation 109 48 replacement of new temperature sensor of split unit (coil and room temperature) 110 49 replacement or window ac air blower 111 50 replacement of 5/8 gas valve of split unit 112 51 replacement of 1/2 gas valve of split unit 113 52 replacement of 3/8 gas valve 114 53 replacement of 1/4 gas valve 115 54 replacement of 5/8 flairnut 116 55 replacement of 1/2 flairnut 117 56 replacement of 3/8 flairnut 118 57 replacement of 1/4 flairnut 119 58 repairing of 03 kva automatic stabilizer 120 58.1 same as item code 58 but for 5 kva 121 58.2 same as item code 58 but for 10 kva 122 59 repairing of 04 kva stabilizer with new relays and circuit plate 123 59.1 same as item code 59 but for 05 kva 124 59.2 same as item code 59 but for 10 kva 125 60 rewinding of main transformer 04 kva automatic stabilizer 126 60.1 same as item code 60 but for 05 kva 127 60.2 same as item code 60 but for 10 kva 128 61 providing & fixing of new condenser coil of 4.0 tr ductable unit 129 61.1 same as item code 61 but for 5.5 tr ductable unit 130 61.2 same as item code 61 but for 1.0 tr split ac(invertor/non invertor type) 131 61.3 same as item code 61 but for 1.5 tr 132 61.4 same as item code 61 but for 2.0 tr 133 62 dismantle and re installation of split unit 1.0 tr (invertor/non invertor) 134 62.1 same as item code 62 but for 1.5 tr 135 62.2 same as item code 62 but for 2.0 tr 136 63 new window ac front grill of approved make compatible to existing machine 137 64 new air mover 138 65 providing & fixing of new remote hand set of the same make and model or compatible to existing machine 139 66 providing and fixing of new floor/wall stand of split ac 140 67 gas top in 2.0 tr split unit(invertor/non invertor type) 141 68 same as item code 67 but for 1.5 tr 142 69 same as item code 67 but for 1.0 tr 143 70 dismantle and installation of cooling unit in other side shifting charges from 1.0 tr to 2.0 tr ac unit split type. 144 71 dismantle, wet servicing and installation of cooling unit of split ac from 1.0 tr to 2.0 145 72 2.5 sq mm 3 core lead of isi or approved make 146 73 2.5 sq mm 4 core lead of isi or approved make 147 74 providing and fixing of new 5.5 tr scrolled compressor 148 75 providing and fixing of new 3 phase, 440 volts, 50 hz, 25ampere contactor 149 76 providng and fixing of single phasing preventor of approved make 150 77 providing and fixing of three phase preventor up to 50 hp motors of approved make 151 78 supply of gas and full charging in 5.5tr ductable unit 152 79 supply of gas and topping in 5.5tr ductable unit 153 80 repairing of 5.5tr ductable unit condensing motor 154 80.1 repairing of 5.5tr ductable unit cooling motor 155 81 rewinding of 5.5tr ductable unit condensing motor 156 81.1 rewinding of 5.5tr ductable unit cooling motor 157 82 providing and fixing of new condensing unit fan motor of approved make compatible to existing 5.5 tr ductable ac unit 158 83 providing and fixing of new cooling unit fan motor of approved make compatible to existing 5.5 tr ductable ac unit 159 84 providing and fixing of new condensing unit fan motor of approved make compatible to existing 4.0 tr ductable unit 160 85 providing and fixing of new cooling unit fan motor of approved make for compatible to existing 4.0 tr ductable unit 161 86 repairing of 5.5 tr ductable unit remote circuit board 162 87 providing and fixing of new circuit board of approved make compatible to existing 5.5 tr ductable unit 163 88 repairing of 4.0 tr ductable unit remote circuit board 164 89 providing and fixing of new circuit board of approved make compatible to existing 4.0 tr ductable unit 165 90 supply and fixing of new temperature sensor of approved make compatible to existing 5.5tr ductable unit 166 91 supply and fixing of new compressor of approved make and model for 50 liter water cooler 167 92 supply and fixing of new condensing fan motor of approved make and model for 50 liter water cooler 168 92.1 same as item code 92 but for the 20 liter water cooler 169 93 supply and fixing of new thermo stat of approved make and model for the 20 ltr water cooler 170 93.1 same as item code 93 but for the 50 ltr., water cooler 171 94 rewinding and repairing of condensing fan motor of 50 ltr. water cooler 172 94.1 same as item code 94 but for 20 ltr., water cooler 173 95 supply and fixing of approved make and model of new relay/starting capacitor/running capacitor of 50 ltr., water cooler 174 96 same as item code 95 but for 20 ltr., water cooler 175 97 supply and fixing of new condenser coil of approved make and model for the 50liter water cooler 176 97.1 same as item code 97 but for 20 liter water cooler 177 98 supply an dfixing of new top and floot ball of 50 liter water cooler 178 98.1 same as item code 98 but for 20 liter water cooler 179 99 cleaning of water storage tanks upto 80 liters capacity of water cooler along with denting, patching and painting charge etc. 180 100 leakage testing & gas filling in 50 liter water cooler 181 100.1 same as item code 100 but for 20 liters water cooler 182 101 supply and fixing of new 25 amp timer switch for ac units 183 102 supply and fixing new dual rotary type compressor for invertor split ac 184 102.1 same as 102 but for 1.5 tr unit 185 102.2 same as 102 but for 2.0 tr unit 186 103 supply of new single rotary compressor for invertor split ac unit 187 103.1 same as 103 but for 1.5 tr unit 188 103.2 same as 103 but for 2.0 tr unit 189 104 repair of electronic circuit plate of same make and model or approved make compatible for existing for indoor unit for invertor split ac unit 190 104.1 same as 104 but for 1.5 tr split ac 191 104.2 same as 104 but for 2.0 tr split ac 192 105 providing and fixing of electronic circuit plate of same make and model or approved make compatible for existing outdoor unit of invertor split ac 193 105.1 same as 105 but for 1.5 tr unit 194 105.2 same as 105 but for 2.0 tr unit 195 106 providing and fixing of new compressor for mitsibushi ac split unit 196 106.1 same as 106 but for 1.5 tr unit 197 106.2 same as 106 but for 2.0 tr unit 198 107 providing and fixing of electronic circuit board for mistibushi split ac unit 199 107.1 same as 107 but for 1.5 tr unit 200 107.2 same as 107 but for 2.0 tr unit 201 107.3 repairing of electronic circuit board for mistibushi split unit for 1.5 tr unit 202 107.4 repairing of electronic circuit board for mistibushi split unit for 2.0 tr unit 203 108 providing and fixing of cooling unit blower motor for mitshibushi split ac unit 204 108.1 same as 108 but for 1.5 tr unit 205 108.2 same as 108 but for 2.0 tr unit 206 108.3 repairing of cooling unit blower motor for mitshibushi split ac for 1.5 tr split ac unit 207 108.4 repairing of cooling unit blower motor for mitshibushi split ac for 2.0 tr split ac unit 208 109 same as 108 but for 1.5 tr condensing unit fan motor 209 110 same as 108 but for 2.0 tr condensing unit fan motor 210 111 repairing of 1.5 tr condensing unit fan motor of mitshibushi split ac unit 211 112 repairing cost of 2.0 tr condensing unit fan motor mitshibushi split ac unit 212 113 proving & fixing of flapper louver motor for 1.5 tr mitshibushi split ac unit 213 113.1 same as 113 but for 2.0 tr unit 214 114 providing and fixing of display circuit plate for mitshibushi split ac unit 215 114.1 same as 114 but for 1.5 tr unit 216 114.2 same as 114 but for 2.0 tr unit 217 115 providing and fixing of new coil temperature sensor of mistibushi split unit 218 115.1 same as 115 but for 1.5 tr unit 219 115.2 same as 115 but for 2.0 tr unit 220 116 providing and fixing of new room temperature sensor of mistibushi split unit 221 116.1 same as 115 but for 1.5 tr unit 222 116.2 same as 115 but for 2.0 tr unit ...

Department of Agricultural Research and Education - Uttar Pradesh

30130067 bids are invited for mafron/floron refrigerant gas r 22 mafron/floron refrigerant gas r 22 in sealed cylinder of 61 kg. capacity , sealed compressor sealed compressor model cr 72 of 5/5.5 ton capacity, three phase suitable for refrigerant r 22 gas , sealed rotary compressor sealed rotary compressor 1.5 ton capacity , refrigerant gas r/22 mafron/floron refrigerant gas r/22 mafron/floron , sealed rotary compressor 2.0 ton capacity sealed rotary compressor 2.0 ton capacity , sealed reciprocating compressor sealed reciprocating compressor cr 22 , sealed compressor ma 57 sealed compressor ma 57 , sealed compressor kce 443 hae sealed compressor kce 443 hae total quantity : 1...

Indian Council Of Agricultural Research - Uttar Pradesh

29149692 bids are invited for boq total quantity : 1 1 mafron / floron refrigerant gas r 22 mafron / floron refrigerant gas r 22 in sealed cylinder of 61 kg. capacity 2 2 sealed compressor sealed compressor model cr 72 of 5 / 5.5 ton capacity, three phase suitable for refrigerant r 22 gas 10 3 sealed rotary compressor sealed rotary compressor 1.5 ton capacity 10 4 refrigerant gas r / 22 mafron / floron refrigerant gas r / 22 mafron / floron 10 5 sealed rotary compressor 2.0 ton capacity sealed rotary compressor 2.0 ton capacity 8 6 sealed reciprocating compressor sealed reciprocating compressor cr 22 4 7 sealed compressor ma 57 sealed compressor ma 57 5 8 sealed compressor kce 443 hae sealed compressor kce 443 hae...

Department of Agricultural Research and Education - Uttar Pradesh

28831074 bids are invited for boq total quantity : 1 1 mafron/floron refrigerant gas r 22 mafron/floron refrigerant gas r 22 in sealed cylinder of 61 kg. capacity 2 2 sealed compressor sealed compressor model cr 72 of 5/5.5 ton capacity, three phase suitable for refrigerant r 22 gas 10 3 sealed rotary compressor sealed rotary compressor 1.5 ton capacity 10 4 refrigerant gas r/22 mafron/floron refrigerant gas r/22 mafron/floron 10 5 sealed rotary compressor 2.0 ton capacity sealed rotary compressor 2.0 ton capacity 8 6 sealed reciprocating compressor sealed reciprocating compressor cr 22 4 7 sealed compressor ma 57 sealed compressor ma 57 5 8 sealed compressor kce 443 hae sealed compressor kce 443 hae...

Department of Agricultural Research and Education - Uttar Pradesh

28663160 bids are invited for boq total quantity : 1 1 mafron / floron refrigerant gas mafron / floron refrigerant gas r 22 in sealed cylinder of 61 kg capacity 2 sealed compressor sealed compressor model; cr 72 of 5 / 5.5 ton capacity, three phase suitable for refrigerant r 22 gas 3 sealed rotary compressor sealed rotary compressor 1.5 ton capacity 4 refrigerant gas r / 22 mafron / floron refrigerant gas r / 22 mafron / floron...

North Eastern Railways - Uttar Pradesh

28507778 supply of drinking water coolerdrinking water cooler, drinking water cooler, storage capacity 380 lts, cooling capacity ( litre / hrs ) 170, 4 faucets for cold water, stainless steel ss304 grade steel body and storage tank, puf insulation, speedy drain, rotary compressor with min one year warrany on machine & compressor suitable to operate on single phase ac supply....

North Eastern Railways - Uttar Pradesh

27980556 supply of drinking water coolerdrinking water cooler, drinking water cooler, storage capacity 380 lts, cooling capacity ( litre / hrs ) 170, 4 faucets for cold water, stainless steel ss304 grade steel body and storage tank, puf insulation, speedy drain, rotary compressor with min one year warrany on machine & compressor suitable to operate on single phase ac supply....

Uttar Pradesh Rajkiya Nirman Nigam Limited - Uttar Pradesh

27671426 items rates of h.v.a.c. works 1 ahri certified centrifugal water cooled chilling machine with air cooled variable speed drive & microprocessor based control panel ( capacity of chiller as given below ) 2 supply, installation, testing and commissioning of centrifugal water cooled water chilling m / c of actual capacity at below mentioned operating conditions with r 134 a refrigerant, open / semihermatic / hermatically sealed centrifugal compressor, direct / gear driven by suitable kw sq. cage induction motor complete with variable speed drive, even pass water cooled shell & tube condenser, even pass insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, refrigerant and oil ( first charge ) , flexible pipe connector at condenser & chiller inlet / outlet, integral lubrication system, microprocessor based control panel, chiller / floor mounted aircooled vsd with ip 54 enclosure, active harmonic filters & accessories etc. all mounted on m.s. frame. motor shall be suitable for 415 volts ± 10%, 50hz ± 5 %, three phase a.c. supply. the chilling m / c as described above shall be in line with specifications & shall have interface card compatible with bms system. 3 condenser cdw in 90.00º f. 4 cdw out 100.00º f 5 flow 3 gpm / tr 6 fouling factor ( mks ) 0.0002 7 pressure drop max 7.5 meter 8 chiller chw in 56.00º f. 9 chw out 44.00º f. 10 flow 2 gpm / tr 11 fouling factor ( mks ) 0.0001 12 pressure drop max 6.5 meter 13 cop at ahri condition 6.3 ( min ) 14 power consumption of chiller / tr at tender condition mentioned above ( max ) 0.68 15 the price quoted for supply, installation, testing & commissioning of centrifugal water chilling unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in indian rupees. 16 capacity of chiller with above mentioned detail shall be as under: 17 500 tr ( 2working + 1 standby ) 18 condenser water pumps set 19 for 500 tr chilling machine 20 supply, installation, testing and commissioning of vertical inline / end suction condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with tefc ( ie3 ) sq. cage induction motor with class f insulation, base plate, coupling guard, ss shaft grade 316 bronze impeller, factory fitted mechanical seal, etc. conforming to technical specification & as per following parameters. 21 condenser water pumps set ( 2w+1s ) 22 capacity of each pump lpm 5670 23 pump head ( mt ) 27.50 24 motor hp ( proposed ) 50.0 25 pump efficiency ( approx ) 80% 26 primary chilled water pumps set 27 for 500 tr chilling machine 28 supply, installation, testing and commissioning of vertical inline / end suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with tefc ( ie3 rating ) , sq. cage induction motor with class f insulation, base plate, coupling guard, ss shaft grade 316, bronze impeller, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters. the chilled water pumps shall also include the cost of thermal insulation. 29 primary chilled water pumps set ( 2w+1s ) 30 capacity of each pump lpm 3780 31 pump head ( mt ) 14.00 32 motor hp ( proposed ) 20.0 33 pump efficiency ( approx ) 75% 34 secondary chilled water pumps set 35 for 500 tr chilling machine 36 supply, installation, testing and commissioning of vertical inline / end suction chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with tefc ( ie3 ) sq. cage induction motor with class f insulation, base plate, couplingguard, ss shaft grade 316, bronze impeller, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters. the chilled water pumps shall also include the cost of thermal insulation. secondary chilled water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system. 37 for 500 tr chilling machine 38 secondary chilled water pumps set ( 2w+1s ) 39 capacity of each pump lpm 3780 40 pump head ( mt ) 18 41 pump motor hp ( proposed ) 25 42 pump efficiency ( approx ) 80% 43 variable speed pumping system for secondary chilled water pumps 44 for 500 tr chilling machine 45 supply, installation, testing and commissioning of variable speed pumping system consisting of three numbers 25 hp variable frequency drive ( vfd ) having ip 54 / 55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 no. differential pressure sensor / transmitters, interfacing amongst all components and compatibility of i / o signals etc complete with other accessories as required. 46 hot water generator for winter heating 47 supply, installation, testing and commissioning of electrically operated hot water generator of capacity 360 kw in multiple bank complete with plc based microprocessor controls, electrical panels, flexible pipe connector etc. confirming to technical specifications section. ( 1 no. standby ) 48 hot water generator shall meet ashrae 90.1 2004 table 7.8 performance standard 49 inlet water temperature 50 °c 50 outlet water temperature 55 °c 51 hot water pumps set 52 supply, installation, testing and commissioning of vertical inline / end suction hot water centrifugal pump sets with bronze impeller for chilled water recirculation complete with tefc ( ie3 ) sq. cage induction motor with class f insulation, ss shaft grade 316, bronze impeller, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters. the hot water pumps shall also include the cost of thermal insulation. hot water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system. 53 hot water pumps set ( 1 no. standby ) 54 capacity of each pump lpm 836 55 pump head ( mt ) 27.5 56 pump motor hp ( proposed ) 7.5 57 pump efficiency ( approx ) 75% 58 variable speed pumping system for hot water pumps 59 supply, installation, testing and commissioning of variable speed pumping system consisting of three numbers 7.5 / 10 hp variable frequency drive ( vfd ) having ip 54 / 55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 no. differential pressure sensor / transmitters, interfacing amongst all components and compatibility of i / o signals etc complete with other accessories as required. 60 cti certified frp induced draft cooling tower ( 550 tr ) 61 supply, installation, testing and commissioning of cti certified frp induced draft, cross / counter flow, twin fan, direct driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with pvc fill, louvers, drift eliminator, weather proof ip 55 tefc motor ( ie3 ) , propeller fan, frp basin with additional sump in the bottom of the basin on every outlet point to avoid vortex formation in the condenser water pipe line, hot dip galvanised steel ladder, stainless steel hardware including nut, bolt, washer etc. the cooling tower shall conform to technical specifications given in the tender. the maximum allowable sound power at a distance of 1 m from the cooling tower shall be less than 75 db. tower fan motor shall be suitable for vfd operation and operation of vfd system shall be based approach of cooling tower. 62 performance required for cooling tower is minimum 38.2 gpm / hp when tested according cti atc 105 procedure. 63 water flow 5670 lpm ( 3 gpm / tr ) 64 designed wet bulb temperature 27.8 °c 65 water inlet / outlet temperature 37.78 °c / 32.22 °c 66 cooling tower basin height 300.0 mm 67 fan motor hp ( proposed ) 2 x 12.5 / 15 hp, 960 rpm 68 cooling tower capacity: 20, 79, 000 kcal / hr, 2w+1s 69 vfd system for cooling tower ( for 3 x 550 tr ) 70 supply, installation, testing and commissioning of vfd having ip 54 / 55 enclosure from factory with heat sink for each cooling tower fan ( 12.5 / 15 hp each, 8 nos. ) with vfd control panel & other accessories as required. vfd control panel shall be installed in the ac plant room. the system shall be complete with variable frequency drive ( vfd ) suitably interfaced with other system components, hand / auto macro designed, 01 no. dedicated microprocessor based logic controller, software duly downloaded, tempearture sensor / transmitters, interfacing amongst all components and compatibility of i / o signals etc complete with other accessories as required. operation of vfd system shall be based approach of cooling tower. 71 pressurised expansion tank ( chilled / hot water ) , 2 pipe system, for each part. ( for 3 x 500 tr plant ) 72 supply, installation, testing and commissioning of pressurised insulated chilled / hot water expansion tank of capacity as given below made of ms sheet & finished with epoxy enamel, having interchangeable butile epdm membrane, operating pressure 10 kg / cm² or as actually required, suitable hp pump, pressure switch, valves, make up water connection, overall height of the tank shall be limited to 3.0 meter & the tank shall be complete with necessary controls etc. as required to make it fully functional. the capacity of each tank shall be 3000 liters approx. capacity of tank is for the guidance only & ac contractor to quote as per actual requirement. 73 air & dirt separators with air release valve & drain valve, 2 pipe system, for each part 74 supply, installation, testing & commissioning of a common air and dirt separators as per specifications on the return chilled water line located at the pump suction and suitable for following flow rate of water. the separator should be complete with high capacity air vent, service valve, non return valve, butterfly valve connection for makeup water inlet, flanges, drain valve etc. 75 total chilled water flow rate 7560 lpm 76 part ii ahu & their controls 77 double skin floor mounted ahu with ec motors 78 supply, installation, testing and commissioning of factory fabricated double skinned chilled water air handling unit floor mounted ( horizontal / vertical to suit site ) , fabricated out of extruded aluminium section with 0.8mm pre plasticized / pre coated galvanised steel sheet outside & 0.8 mm plain galvanised steel sheet inside complete with blower section with single / multiple amca certified backward / forward curved plug fan with aerofoil design blades as given below, ec motors ( ie4 ) suitable for operation on 415 volts ± 10%, 50 hz ± 5% ac supply with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, blower suitable for static pressure as required, cooling coil made of aluminium finned copper tube with coil section, copper header, pre filter section with non woven synthetic media merv 8 filters in extruded aluminium frame, fine filter section with merv 13 filters in extruded aluminium frame, coilotron uv section only of 600 mm in length in floor mounted ahu, polished stainless steel drain pan made out of 22 g sheet duly insulated etc. without face and bypass dampers. 79 the ahu panels shall be insulated with 25 mm thick & 38 kg / m³ density pu foam & shall have thermal break. the motor & blower assembly shall be mounted on aluminium extruded section only. the complete ahu shall conform to standard specication. the face velocity across coil shall be limited to 152 mpm maxm. static pressure given below for each ahu is indicative & shall be as per actual requirement based on shop drawings. the capacity of air handlers shall be as follows. the ahu shall be with one set of commissioning filter which shall be replaced with actual filter. 80 3, 000 cfm, single fan, 50 mm st. pr., 6 row 81 4, 000 cfm, single fan, 50 mm st. pr., 6 row 82 5, 000 cfm, single fan, 60 mm st. pr., 6 row 83 6, 000 cfm, single fan, 60 mm st. pr., 6 row 84 7, 000 cfm, single fan, 65 mm st. pr., 6 row 85 8, 000 cfm, single fan, 65 mm st. pr., 6 row 86 8, 500 cfm, single fan, 65 mm st. pr., 6 row 87 9, 000 cfm, single fan, 65 mm st. pr., 6 row 88 10, 000 cfm, single fan, 70 mm st. pr., 6 row 89 11, 000 cfm, single fan, 70 mm st. pr., 6 row 90 13, 000 cfm, single fan, 70 mm st. pr., 6 row 91 14, 000 cfm, single fan, 70 mm st. pr., 6 row 92 15, 000 cfm, single fan, 75 mm st. pr., 6 row 93 16, 000 cfm, single / twin fan, 75 mm st. pr., 6 row 94 18, 000 cfm, single / twin fan, 75 mm st. pr., 6 row 95 20, 000 cfm, single fan / twin, 75 mm st. pr., 6 row 96 fan coil unit 97 supply, installation, testing and commissioning of gi powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters merv 8, filter box, double sandwitched insulated extended tray to accomodate all fcu valves within extended tray duly insulated with nitrile rubber as specified for pipe insulation, supporting arrangement, electrical wiring etc. the fan shall be selected for 3 6 mm external static pressure as given below & as per approved drawing. 98 the complete fan coil unit shall have acoustically lined casing & shall be in line with the tender specification. the capacity of fan coil units shall be as follows. the fcu shall be with one set of commissioning filter which shall be replaced with actual filter. 99 1.0 tr, 3 4 mm external static 100 1.5 tr, 3 4 mm external static 101 2.0 tr, 3 4 mm external static 102 fcu valves and copper connection set 103 supply, installation, testing and commissioning of insulated copper connection set for chilled water line consisting of ball valve with strainer at inlet, ball valve at outlet, copper connection set with braided pipe flexible connector at in and out at one end etc excluding 2 way pibc modulating control valve ( quantified separately ) but provision of fixing it as required for smooth functioning of unit. valves sizes shall be 25 mm up to 2 tr & 32 mm for 2.5 tr & above ) 104 pressure independant balancing cum two way control valve ( cooling coil for ahu & fcu ) ( dsr 2018 16.11.4 ) 105 supply, installation, testing and commissioning of following sizes electronic, self balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. the actuator shall be capable of accepting upto 10v dc and upto 20 ma electric signal and shall provide similar transduced feedback output to control system. maximum close off pressure shall not be less than 6 bar for upto 50 mm valves and 7 bar for 65 mm & above. valves should have pressure rating of 25 bar minimum. 106 20 mm dia, maximum 5 gpm ( dsr 2018 16.11.4.10 ) 107 25 mm dia, maximum 9 gpm ( dsr 2018 16.11.4.9 ) 108 32 mm dia, maximum 15 gpm ( dsr 2018 16.11.4.8 ) 109 40 mm dia, maximum 26 gpm ( dsr 2018 16.11.4.7 ) 110 50 mm dia, maximum 54 gpm ( dsr 2018 16.11.4.6 ) 111 65 mm dia, maximum 80 gpm ( dsr 2018 16.11.4.5 ) 112 80 mm dia, maximum 125 gpm ( dsr 2018 16.11.4.4 ) 113 thermostat for fcu 114 supply, installation, testing and commissioning of automatic control for fan coil units consisting of pressure independant balancing cum two way control valve ( already quantified herein ) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed ( high, medium, low ) . the quoted price of thermostat shall include the cost of 20mm ms conduits, control cabling, ms box etc as required. thermostats shall be interlocked to prevent simultaneous heating and cooling. 115 digital display type thermostat for ahu 116 supply, installation, testing and commissioning of proportional cooling / heating digital display, communicating type thermostat at air handler. temperature sensor for ahus are also specified in bms part. thermostat shall be installed in case bms commissioning is significantly delayed. 117 accoustically insulated vav boxes 118 supply, installation, testing and commissioning of wire free variable air quality station / variable air volume unit ( vav / vaq ) made out of extruded alluminium of 1.5 mm nominal thickness consisting of low leakage extruded alluminium volume control damper; rapid average pitot tube, air flow straightner ( honey comb patterned ) , modulating motorised assembly for pressure independent volume control with programmable advanced application specific controller having digital differential pressure sensor, extra 2 ai & ao, 2 di, 3 potential free output, 1 foating actuator port, wireless wall / room module link & wireless zig bee communication; & necessary power supply circuit suitable for 220v, portable room module having temperature and humidity sensor, capacitive touch button with large display, replacable 3.3 v battery, and wireless control link. 119 vav boxes, air quantity up to 500 cfm 120 vav boxes, air quantity 500 to 700 cfm 121 vav boxes, air quantity 701 to 1000 cfm 122 vav boxes, air quantity 1001 to 1500 cfm 123 vav boxes, air quantity 1501 to 2000 cfm 124 vav boxes, air quantity 2001 to 2500 cfm 125 vav boxes, air quantity 2501 to 3000 cfm 126 vav boxes, air quantity 3001 to 4000 cfm 127 vav boxes, air quantity 4001 to 5000 cfm 128 inline fans: supply, installation, testing and commissioning of inline fans with motor complete in all respect & of following capacities. the casing of inline fans shall be acoustically lined & shall be selected for lower noise level. fan motor shall have inbuilt speed controller. inline fans of capacity 100 200 cfm shall be with built in suction diffuser / grills, backdraft damper to prevent back flow. 129 100 200 cfm ( 8mm static pressure, single phase ) 130 300 400 cfm ( 8mm static pressure, single phase ) 131 500 600 cfm ( 10mm static pressure, single phase ) 132 700 900 cfm ( 15mm static pressure, single phase ) 133 1000 1500 cfm ( 15mm static pressure, single phase ) 134 plastic propeller fans nsupply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 hz, single phase ac supply complete with gravity louvers & speed regulator etc. 135 100 200 cfm ( 3 mm ex. st. pr. ) 136 300 500 cfm ( 3 mm ex. st. pr. ) 137 axial flow fan for lift well, lobby & staircase pressurisation, fresh air & exhaust air ventilation etc. 138 supply, installation, testing and commissioning of ceiling mounted tube axial flow fans with adjustable pitch blade, ms / gi long casing ( 2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia ) , cast aluminium alloy impeller complete with tefc ( ie3 ) sq. cage induction motor suitable for 415 volts ± 10%, 50hz ± 3 %, three phase a.c supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep ( inlet & outlet as required ) , bird screen ( inlet & outlet as required ) etc. & of following capacity. the complete fan along with motor shall be suitable for 250 °c temperature rated for 2 hours. fan outlet velocity shall be limited to maximum of 16 m / sec. static pressure, fan & fan motor kw given below are for guideline & actual dia / kw shall be as per manufacturer selection based on maximum 16 m / sec outlet velocity & static pressure shall be as per shop drawings. 139 axial fan shall be amca certified. 140 38, 000 cfm ( 25mm st. pr, 1250 mm dia axial fan, 11 kw, 1450 rpm fan motor, direct driven ) 141 30, 000 cfm ( 25mm st. pr, 1120 mm dia axial fan, 9.3 kw, 1450 rpm fan motor, direct driven ) 142 25, 000 cfm ( 25mm st. pr, 1120 mm dia axial fan, 7.5 kw, 1450 rpm fan motor, direct driven ) 143 22, 500 cfm ( 25mm st. pr, 1000 mm dia axial fan, 7.5 kw, 1450 rpm fan motor, direct driven ) 144 20, 000 cfm ( 25mm st. pr, 1000 mm dia axial fan, 7.5 kw, 1450 rpm fan motor, direct driven ) 145 18, 000 cfm ( 20mm st. pr, 1000 mm dia axial fan, 5.5 kw, 1450 rpm fan motor, direct driven ) 146 15, 000 cfm ( 20mm st. pr, 900 mm dia axial fan, 3.7 kw, 1450 rpm fan motor, direct driven ) 147 12, 000 cfm ( 20mm st. pr, 800 mm dia axial fan, 3.7 kw, 1450 rpm fan motor, direct driven ) 148 10, 000 cfm ( 20mm st. pr, 800 mm dia axial fan, 2.2 kw, 1450 rpm fan motor, direct driven ) 149 8, 000 cfm ( 20mm st. pr, 700 mm dia axial fan, 2.2 kw, 1450 rpm fan motor, direct driven ) 150 factory fabricated double skin airwasher 151 supply, installation, testing and commissioning of factory fabricated double skinned air washer unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre plasticized / pre coated galvanised steel sheet outside & 0.6 mm plain galvanised steel sheet inside with blower, blower section and blower motor tefc ( motor efficiency ie3 ) type suitable for operation on 415 volts ± 10%, 50 hz ± 5% ac supply, belt drive package, wet section & tank shall be made of 18 g stainless steel. 152 the air washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 mpm. the air washer shall have an efficiency of 90% & shall be complete with water circulation pump gi b class interconnecting piping & valves aluminum viscous filters. the air washer shall have an efficiency of 90% & shall be complete with water circulation pump gi b class interconnecting piping & valves aluminum viscous filters. the airwasher panels shall be insulated with 23mm thick & 36 kg / m³ density pu foam. the airwasher shall conform to specication given in the tender & shall be of following capacity. aws fan & fan motor kw given below are for guideline & actual dia / kw shall be as per manufacturer selection based on maximum 11 m / sec outlet fan velocity. 153 30, 000 cfm, 1 x 1000 mm dia. fan, 1 x 11 kw fan motor, 50 mm st. pressure, monoblock pump. 154 45, 000 cfm, 2 x 800 mm dia. fan, 2 x 11 kw fan motor, 50 mm st. pressure, monoblock pump 155 centrifugal fan 156 supply, installation, testing and commissioning of didw / sisw ( as per drawing ) centrifugal fan, gi construction. the fan shall be suitable for v belt drive arrangement & in bare shaft construction. the fan impeller shall have backward / forward curved blades suitable for handling air. the centrifugal fan motor shall be suitable for single speed tefc ( motor efficiency ie3 ) squirrel cage induction motor suitable for 415 415 volts ± 10%, 50hz ± 5 %, three phase ac power supply motor with class h insulation, fire resistant v belt drive set comprising of fan & motor pullys & one set of belts, slide rails, ms / gi belt protection, fire rated convass connection at outlet side, multilouvers damper at outlet side in gi construction with casing in 16 g & louvers in 18 g construction, foundation bolts, common base frame in standard ms construction, anti vibration mountings arrangement. fan & fan motor kw given below are for guideline & actual dia / kw shall be as per manufacturer selection based on maximum 11 m / sec outlet fan velocity. the fan capacity shall be as follows: 157 8, 000 cfm, 25mm st. pr, 500 mm dia fan, 5 hp, 1440 rpm fan motor, belt driven 158 12, 000 cfm, 25mm st. pr, 630 mm dia fan, 5 hp, 1440 rpm fan motor, belt driven 159 25, 000 cfm, 25mm st. pr, 900 mm dia fan, 12.5 hp, 1440 rpm fan motor, belt driven 160 double skin floor mounted mechanical ventilation unit ( mvu ) with fan & filter section only 161 supply, installation, testing and commissioning of factory fabricated double skin mechanical ventilation unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre plasticized / pre coated galvanised steel sheet outside & 0.6 mm plain galvanised steel sheet inside with blower, blower section and blower motor tefc ( efficiency ie3 ) type suitable for operation on 415 volts ± 10%, 50 hz ± 5% ac supply, pre filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 22 g sheet duly insulated complete with belt drive package etc. the mvu panels shall be insulated with 23mm thick & 36 kg / m³ density pu foam. the motor & blower assembly shall be mounted on aluminium extruded section only. the complete mvu shall confirm to tender specication. static pressure given below for each mvu is indicative & shall be as per actual requirement based on shop drawings. the capacity of mvu shall be as follows: 162 5, 000 cfm, 35 mm st. pr., 163 10, 000 cfm, 40 mm st. pr., 164 co & co2 based sensing system for automated working of parking ventilation fans ( normal & fire mode both ) 165 supply, installation, testing and commissioning of co & co2 based sensing system for automatic running of parking ventilation supply and exhaust fans for normal & fire mode operation. each set of system for each zone shall have four nos. combined co & co2 sensor. 166 sensor shall have following measuring range & accuracy: 167 co ( electrochemical type ) minimum measuring range : 0 ~ 500 ppm, co2 ( ndir type ) minimum measuring range : 0 ~ 5000 ppm & accuracy < 1% of measuring range. 168 coverage of each sensor shall be 7500 sq ft & three nos shall be placed in each zone 169 normal mode axial fan shall automatically start when co measurement is above 30 ppm or co2 measurement is above 900 ppm. if co level reaches 150 ppm then fan in fire mode should start automatically. user should be able to vary these setpoints through hmi / web based software interface / supervisory controller. logic controller shall also have the logic to switch on the normal mode fan when co is above 30 ppm & switched off again when co drops below 25 ppm.also it should switch on the fan if co2 is above 900 ppm & switch off once co2 level reaches below 800 ppm . similarly fire mode fan should also switched on / off when co level reaches 150 ppm & switched off when ppm reaches below 50. logic controller shall also have the facility of timer & manual override for fan operation. 170 standalone, networkable, intelligent microprocessor based programmable ddc 171 supply, installation, testing and commissioning of one no. standalone intelligent microprocessor based programmable ddc ( for each zone ) with inbuilt hmi , onboard modbus port & network functionalities based upon knx protocol along with suitable enclosures with all accessories including necessary switchgear, step down transformer, internal power and control cabling ( excluding power & control cable to fan ) , complete in all respect & as required to suit the site conditions etc. each set of ddc controller should have 4 ai, 8 di, 4 ao, 5 do & modbus port as per io summary given in specification per each zone. 172 vfd for 50% of basment parking ventilation fan 173 supply, installation, testing and commissioning of imported bms compitable vfd for ahu fan motor having ip 55 enclosure with heat sink, mains disconnect, built in harmonic filters, emc filters ( electromagnetic compatibility filters ) , 4 pid controlers, automatic energy optimization / load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. 174 5.5 kw motor 175 7.5 kw motor 176 9.3 kw motor 177 kitchen scrubber unit dry type in double skin construction 178 supply, installation, testing and commissioning of double skin dry scrubber unit comprising of electrostatic precipitator module, sisw exhaust air fan & accessories as required. 179 electrostatic section shall in double skin construction made of 22 gauge galvanized sheet with inner sheet high bake epoxy powder coated, washable type aluminum mesh pre filters, suitable sisw backward / forward curved kitchen exhaust air fan complete with tefc induction motor, drive assembly, base frame, vibration isolators and other accessories, wire ionizers to create high voltage dc field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area, to work as magnet for charged smoke and oil particles. average efficiency of 90 95% as per dop test method. electrostatic precipitator should be able to charge the particles from 0.01 micron to 10 microns through stable power supply. collector cell should be of permanent type and incorporate facility for easy removal for cleaning. the system should be fitted with appropriate overload protection and safety interlock. noperating voltage – 220v, 50 hz. nionizing voltage – 12.5 – 13 kvdc. ncollector cell voltage – 6 – 7 kvdc. n 180 30, 000 cfm capacity, st. pr. as required 181 air cooled precision ac packaged unit 182 supply, installation, testing & commissioning of double skinned air cooled package units of 625 cfm / ton, floor discharge type complete with fan section with dynamically balanced plug type fan with ec motor of ie4 grade with auto speed variation, electronic humdifier, heaters, externally equalised electronic expansion valve, microvee & pre filters, multi row deep dx cooling coil all of which shall be contained within the cabinet of unit. the unit should have one independent refrigeration circuits with refrigerant r 134a / r 410 / r 407c, manual reset hp and an auto reset lp switch, filter drier and charging port. a thermal expansion valve, sight glass and filter drier shall be provided for each circuit. the outdoor unit shall have condenser coil, inverter or digital scroll compressor with variable refrigerant volume or flow technology, condenser fans with motor of ie4 grade and drive, stand, power & control cabling etc. the standard controls shall be of microprocessor based programmable pid logic controller with dew point logic. the capacity of units are given below which is based on ambient temperature of 43.0 deg. c and inside condition of 20+ / 2 deg. c with rh of 50+ / 5%. precision ac unit shall have provision of inbuilt sequencing operation when multiple units are grouped together. controller of the unit shall have provision of open protocall or better one. 183 8.5 tr actual capacity ( 2w+1s ) 184 air cooled hi cfm package unit 185 supply, installation, testing and commissioning of packaged air conditioning system air cooled type complete with scroll compressor, air cooled condenser, dx coil, filters, blowers section with motor and drive refrigerant piping connection port and oil, hp / lp cut out, thermostatic expansion valve distributor, starter, stand, power & control cabling and other necessarycontrols to form a factory tested compact unit. all items should be incased in enamel painted anticorrosive sheet metal cabinet. the air quantity in the packaged unit should have at least of 600 cfm / ton capacity & cooling coil shall be with three rows. the capacity mentioned below is the actual capacity at 45.0 deg. c ambient. 186 11.0 tr actual capacity ( 2w+1s ) 187 hi wall split ac unit ( 5 star rated ) 188 supply, installation, testing and commissioning of air cooled hi wall split unit with rotary compressor suitable for 15 to 20 meter length of piping / scroll compressor suitable for 40 to 60 meter of refrigerant piping to suit site condition with cordless control, stand, power & control cabling & of following capacity. 189 1, 5 tr capacity 190 2.0 tr capacity 191 refrigerant piping 192 supply, installation, testing and commissioning of refrigerant piping ( two lengths ) duly insulated with 6 mm kinifoam insulation of density 60+ / 10% kg / m3 to interconnect indoor & outdoor units for each circuit. 193 for hi wal split unit 194 for package unit & precision package unit 195 dual speed jet fan for car park ventilation in basement. ( single speed normal mode, double speed fire mode ) 196 supply, installation, testing and commissioning of dual speed jet fan with motor suitable for 415 volts ± 10%, 50hz ± 5 %, three phase a.c supply with silencers, protection guards, mounting brackets, inlet cone & accessories as required for car park ventilation in basement, & of following capacity. it should be suitable for 300 °c for 2 hours. the fan capacity & other details shall be as given below: 197 capacity of fan ( m³ / s ) 0.8 / 1.5 198 casing material galvanized sheet 199 power input kw 0.24 / 1.2 200 rpm 1445 / 2880 201 sound level db ( a ) @1 m 47 / 62 202 type of drive direct drive 203 no. of fans 64 204 no. of fire zones 4 205 cfd analysis ( computational fluid dynamics simulations ) : the jet fan supplier shall include the cost of cfd analysis & shall select the size and positioning of the fans, giving velocity vectors, static pressure contours, simulations of smoke spreading and other information required for the project. 206 no. of jet fans 207 ahu mounted coilotron uv system for floor mounted ahu 208 supply, installation, testing and commissioning of ahu mountable self contained and factory assembled coilotron uv system with ul 1995 abqk listed and ul 2043 certified, uv lamp life shall not be less than 11000 hours. coilotron shall be installed in all floor mounted ahus as specified herein. all the component / parts shall comply with the specification given in the tender. ahu supplier and coilotron supplier shall co ordinate with each other regarding the fixing of the same in the ahu. 209 for 2, 000 to 8, 000 cfm ahu 210 for 8, 500 to 15, 000 cfm ahu 211 for 16, 000 to 22, 000 cfm ahu 212 uvgi ( ultra voilet germicidal irradiation ) system in supply duct 213 supply, installation, testing & commissioning of duct mounted, factory assembled, uvgi system of minimum 90% kill rate with intensity of 3, 000 mw sec / cm² per pass of air borne viruses, covid 19 virus, mold, spores, bacteria & odour etc. complete with all electrical components such as ballasts, disconnect switch, fuse, hour meter etc. in electrical box, ul listed cable between electrical box and uvgi frame, guide rails and installation rails, cover plates & all necessary hardware required for installation. the complete package shall be sourced from uvgi manufacturer. the selection of uvgi shall be based on above parameters, tender specification & suitable for duct air quantity as given below: 214 for 2, 000 to 6, 000 cfm duct 215 for 6, 001 to 10, 000 cfm duct 216 for 10, 001 to 15, 000 cfm duct 217 for 15, 001 to 20, 000 cfm duct 218 chilled water & condensate drain water piping with nitrile rubber insulation & aluminium cladding ( dsr 2018 16.2 ) 219 supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building ( with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc. ) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg / m3 density, thermal conductivity 0.037 w / mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive covered with a layer of 120 gm / sq.m polythene sheet ( vapour barrier ) and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip ( as per is:1322 as amended up to date ) at joints complete including repairing of damage to building etc. as per specifications and as required complete in all respect. 220 note: the pipes of sizes 150 mm & below shall be m.s. c class as per is : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35 mm thick m.s. sheet for pipes upto 350 mm dia. and from minimum 7mm thick ms sheet for pipes of 400 mm dia and above. 221 300 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.3 ) 222 250 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.4 ) 223 200 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.5 ) 224 150 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.6 ) 225 125 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.7 ) 226 100 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.8 ) 227 80 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.9 ) 228 65 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.10 ) 229 50 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.11 ) 230 40 mm dia. ( 32 mm thick insulation ) ( dsr 2018 16.2.12 ) 231 32 mm dia. ( 19 mm thick insulation ) ( dsr 2018 16.2.13 ) 232 25 mm dia. ( 19 mm thick insulation ) ( dsr 2018 16.2.14 ) 233 manual balancing valves ( dsr 2018 16.7.2 ) 234 balancing valve with built in measuring facility with c i body flanged construction with epdm coated disc with long pitch with protected out pipe insulation & pn 16 pressure rating for chilled / hot water circulation as specified. 235 200 mm dia ( for chiller ) ( dsr 2018 16.7.2.1 ) 236 100 mm dia ( for hwg ) ( dsr 2018 16.7.2.4 ) 237 valves & strainer 238 supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. valves shall be insulated as per pipe insulation material & thickness given above. 239 butterfly valve ( manual ) with c i body ss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water / hot eater circulation as specified. ( dsr 2018 16.7.1 ) 240 300 mm dia 241 200 mm dia ( dsr 2018 16.7.1.1 ) 242 150 mm dia ( dsr 2018 16.7.1.2 ) 243 125 mm dia ( dsr 2018 16.7.1.3 ) 244 100 mm dia ( dsr 2018 16.7.1.4 ) 245 80 mm dia ( dsr 2018 16.7.1.5 ) 246 65 mm dia ( dsr 2018 16.7.1.6 ) 247 50 mm dia ( dsr 2018 16.7.1.7 ) 248 non return valve with duel plate of c i body ss plates vulcanized nbr seal flanged end & pn 16 pressure rating for chilled / hot water circulation including insulation as specified. ( dsr 2018 16.7.3 ) n 249 200 mm dia ( dsr 2018 16.7.3.1 ) 250 100 mm dia ( dsr 2018 16.7.3.4 ) 251 y strainer 252 200 mm dia ( dsr 2018 16.7.4.1 ) 253 100 mm dia ( dsr 2018 16.7.4.4 ) 254 80 mm dia ( dsr 2018 16.7.4.5 ) 255 65 mm dia ( dsr 2018 16.7.4.6 ) 256 50 mm dia ( dsr 2018 16.7.4.7 ) 257 40 mm dia ( dsr 2018 16.7.4.8 ) 258 pressure gauges nproviding and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. ( dsr 2018 16.8 ) 259 thermometer nproviding & fixing in position the mercury in glass industrial type thermometers. ( dsr 2018 16.9 ) 260 motorised butterfly valves 261 supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & hot water line of each chiller & hot water generator operated through bms & of following sizes. valves shall be insulated as per pipe insulation material & thickness given above. 262 200 mm dia ( for chiller ) 263 100 mm dia ( for hwg ) 264 globe / ball valves 265 25 mm dia 266 32 mm dia 267 40 mm dia 268 auto air vent 269 supply, installation, testing and commissioning of auto air vent valve of following sizes and complying with tender specification. 270 10 mm dia auto air vent valve 271 19 mm dia auto air vent valve 272 25 mm dia auto air vent valve 273 condenser water piping 274 supplying, fixing, testing and commissioning of condenser water pipes of following sizes of ms c class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted / buried in ground excavation and refilling etc. as per specification and as required complete in all respect. 275 note: the pipes size 150 mm & below shall be m.s. c class as per is : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35 mm thick m.s. sheet for pipes upto 350 mm dia. and from minimum 7mm thick ms sheet for pipes of 400 mm dia and above. 276 300 mm dia pipe ( dsr 2018 16.10.1 ) 277 250 mm dia pipe ( dsr 2018 16.10.2 ) 278 200 mm dia pipe ( dsr 2018 16.10.3 ) 279 50 mm dia pipe 280 350 mm dia pipe 281 motorised butterfly valves 282 supplying, fixing, testing and commissioning of following sizes motorized butterfly valve with ci body, ss disc, o ring and minimum pn 16 pressure rating, conforming to bs 5155, is 13095, with ip 55 actuator, capable of accepting upto 10v dc , and upto 20 ma electric signal and providing similar transduced feedback output to control system as required. 283 250 mm dia ( for condenser out, cooling tower in & out ) ( dsr 2018 16.11.3.3 ) 284 valves & strainer 285 supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications. 286 butterfly valve ( manual ) with ci body ss disc nitrile sheet & o ring & pn 16 pressure rating as specified. n 287 250 mm dia 288 350 mm dia 289 50 mm dia ( dsr 2018 16.11.1.7 ) 290 thermometer nproviding & fixing in position the mercury in glass industrial type thermometers. ( dsr 2018 16.9 ) 291 pressure gauges nproviding and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. ( dsr 2018 16.8 ) 292 manual balancing valves 293 supply, installation, testing and commissioning of manual balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes: 294 250 mm dia ( for condenser out, cooling tower in ) 295 valves & strainer 296 supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender. 297 non return valve with dual plate of ci body ss plates vulcanized nbr seal flanged end & pn 16 pressure rating asspecified. 298 250 mm dia 299 pot strainer 300 supply, installation, testing and commissioning of pot strainer of the following sizes confirming to tender specification. 301 350 mm dia 302 part v air distribution work. 303 rectangular gi ducting ( factory made ) ( dsr 2018 16.12.1 ) 304 supply, installation, balancing and commissioning of factory fabricated gss sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 305 thickness 0.63 mm sheet ( dsr 2018 16.12.1.1 ) 306 thickness 0.80 mm sheet ( dsr 2018 16.12.1.2 ) 307 thickness 1.00 mm sheet ( dsr 2018 16.12.1.3 ) 308 thickness 1.25 mm sheet ( dsr 2018 16.12.1.4 ) 309 site fabricated gi ducting ( dsr 2018 16.12.2 ) 310 supply, installation, balancing and commissioning of site fabricated gss sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required 311 a ) 24 g ( up to 750 mm ) ( dsr 2018 16.12.2.1 ) 312 b ) 22 g ( 751 to 1500 mm ) ( dsr 2018 16.12.2.2 ) 313 c ) 20 g ( 1501 to 2250 mm ) ( dsr 2018 16.12.2.3 ) 314 d ) 18 g ( above 2250 mm ) ( dsr 2018 16.12.2.4 ) 315 factory fabricated double skin insulated gss spiral round duct for positive pressure up to 70 mm 316 supply, installation and testing of double skin insulated g.s.s. factory fabricated spiral round duct made in two layers with 13 mm thick closed cell nitrile rubber class o insulation sandwitched in between two layers. the duct fabrication shall comply with the latest is / smacna standard and complete with double skin fittings such as bends, elbows, collar etc as required and as per approved shop drawings. inner & outer gss sheet thickness along with spiral / longitudinal seam gauge shall be same as given below & duct shall be installed using steel wire rope hangers & supports. cost of duct shall include all double skin fittings & steel wire rope hangers / supports. duct shall be supplied with following internal diameter. 317 up to 650 mm dia internal, 24 g 318 651 to 900 mm dia internal, 22 g 319 901 to 1250 mm dia internal, 20 g 320 duct accoustic lining nsupply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg / m3, with 25 mm x 25 mm gi section of 1.25 mm thick, at 600 mm centre to centre covered with reinforced plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, cprx compound etc. complete as required and as per specifications. ( dsr 2018 16.21 ) 321 fire dampers & actuator 322 supplying, fixing, testing and commissioning of fire dampers in supply air duct / main branch and return air path as and where required of required sizes i / c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. the spring return action shall be inbuilt mechanism and not externally mounted. the damper shall also be closed in the event of fire signal complete as required and as per specifications. ( dsr 2018 16.2 ) 323 fire damper ( dsr 2018 16.20.1 ) 324 actuator ( dsr 2018 16.20.2 ) 325 grilles, diffusers, vcd 326 supply, installtion and testing of powder coated aluminium extruded grills / diffusers as per specifications given in tender and of following sizes. 327 supplying & fixing of powder coated extruded aluminium supply air grills with aluminium volume control dampers as per specifications. ( dsr 2018 16.15 ) 328 supplying & fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required. ( dsr 2018 16.16 ) 329 supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. ( dsr 2018 16.17 ) 330 supplying, fixing testing commissioning of return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. ( dsr 2018 16.18 ) 331 gss duct damper supply, installation, testing and commissioning of gi volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications ( dsr 2018 16.13 ) 332 supply, installtion and testing of powder coated aluminium extruded grills / diffusers as per specifications given in tender and of following sizes. 333 fresh / exhaust air louvers with bird screen & damper 334 volume control gi dampers to be provided in supply & exhaust air registers / terminals. 335 fixed bar linear air register 336 100 mm 337 150 mm 338 200 mm 339 250 mm 340 slot linear air diffusers of following sizes: 341 2 slot 342 3 slot 343 high flow jet diffusers 344 hi flow jet diffusers suitable for 1000 1200 cfm each with a throw of minimum 8 10 meters. 345 supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell nitrile rubber ( class o ) insulation on existing duct after applying suitable adhesive for nitrile rubber. the joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 346 19 mm ( dsr 2018 16.23.1 ) 347 acoustic insulation of ahu room supplying, fixing acoustic lining on wall and ceiling of ahu room with 50 mm thick, density 32 kg / cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25x50x50x50x25 mm made out of 0.6mm thick gi sheet u shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications. ( dsr 2018 16.22 ) 348 main ac panel ( part i ) 349 a ) centrifugal chiller, 500 tr ( 2w+1s ) , 340 kw each with vfd 350 b ) chw pr. pump for chiller, 20 hp each, ( 2w+1s ) 351 c ) cdw pump for chiller, 50.0 hp each, ( 2w+1s ) 352 d ) chw sr. pump 25.0 hp each, ( 2w+1s ) with vfd 353 e ) cooling tower fan motor, 2 x 12.5 / 15 hp ( 4w+2s ) with vfd 354 f ) hot water generator, 360 kw each, ( 1w+1s ) 355 g ) hw pump 7.5 hp each, ( 1w+1s ) with vfd 356 supply, installation, testing and commissioning of cubical type sectinalised floor standing switch board by cpri apprved firms of 31 mva fault capacity at 415 v complete with 4 strip, 1600 a capacity aluminium bus bar electrolytic grade e 91, cable alley, switchgears suitable for ac 23 duty & of following capacity & as per specification given in the tender. ( minimum front 4500mm, minimum height 2200mm & minimum width 1000mm ) . 357 a ) incomer 358 1250 a 4 pole acb with overload, short ckt., earth fault, protection release, with 144 mm ( 0 1200 a ) ammeter with 3 ct and selector switch, 144 mm ( 0 500 v ) voltmeter with selector switch, phase indication light with protection fuse, on / off / trip indicating light with protection fuse. set 02 359 b ) bus coupler 360 bus coupler for section a & b of 1250 a capacity, four pole acb. set 01 361 c ) incomer and bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies. lot 362 d ) outgoings 363 i ) for 3 nos. water cooled chilling machine ( 2w+1s ) 364 800 a 4 pole acb with overload, short circuit & earth fault protection with ( 0 800a ) ammeter with three ct & selector switch, on / off / trip indication light with protection fuses. set 02 365 ii ) for 1 no water cooled chilling machine standby arrangement 366 800 a 4 pole acb with overload, short circuit & earth fault protection & 800 a 4 pole manual change over switch with ( 0 600a ) ammeter with three ct & selector switch, on / off / trip indication light with protection fuses. set 01 367 iii ) for 3 nos. 20 hp pr. chw pumps for chiller ( 2w+1s ) 368 63 a tpn mcb with 32 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 60a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 03 369 iv ) for 3 nos. 50 hp cdw pumps for chiller ( 2w+1s ) 370 200 a 4 pole mccb with 70 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 200a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 03 371 v ) for 3 nos. 25 hp chw variable speed pumps 372 40 a tpn mcb. set 03 373 vi ) for 6 nos. 10 / 12.5 hp ct fan variable speed motor ( 6w+2s ) 374 40 a tpn mcb. set 06 375 vii ) for 2 nos. 360 kw hot water generator ( 1w+1s ) 376 630 a electrically operated draw out type 4 pole mccb set 02 377 viii ) for 2 nos. 7.5 hp hw variable speed pumps 378 32 a tpn mcb. set 02 379 controls & interlocking accessories as required. lot 380 electrical sub panel for ahu, fan, mvu etc. 381 supply, installation, testing and commissioning of cubical wall mounted type switch board as detailed below & switch gears suitable for ac 23 duty including making interconnection etc as required. bms compitable electronic kwh meter shall have been taken in main electrical work therefore same shall not be part of followings sub panel. 382 for ahu & vent fan motor up to 3.73 kw 383 40 a tpn mcb with 9 / 12 / 16 a dol starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. set 01 384 controls & interlocking accessories as required. lot 385 for ahu & vent fan motor of 5.6 kw 386 40 a tpn mcb with 25 a dol starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. set 01 387 controls & interlocking accessories as required. lot 388 for ahu & vent fan motor of 7.5 kw 389 40 a tpn mcb with 16 a star delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. set 01 390 controls & interlocking accessories as required. lot 391 for vent fan motor of 9.3 / 11 kw 392 63 a tpn mcb with 25 a star delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. set 01 393 controls & interlocking accessories as required. lot 394 for fan motor, 1 x 18 kw air washer + 1 x 7.5 kw centrifugal fan for ac plant room ventilation 395 supply, installation, testing and commissioning of cubical type sectinalised floor standing switch board by cpri apprved firms of 18 mva fault capacity at 415 v complete with 4 strip, 160 a capacity aluminium bus bar electrolytic grade e 91, cable alley, switchgears suitable for ac 23 duty & of following capacity & as per specification given in the tender. 396 incomer 397 125 a 4 pole mccb with ( 0 125a ) ammeter with three ct and selector switch, ( 0 500 v ) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. set 01 398 outgoing 399 a ) for air washer fan motor of 1 x 18 kw 400 100 a tpn mcb with 32 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 100a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 01 401 b ) for air washer pump 402 16 a sp mcb, set 1 403 c ) for fan motor of 7.5 kw 404 40 a tpn mcb with 16 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 40a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 01 405 controls & interlocking accessories as required. lot 406 for fan motor, 1 x 15 kw air washer + 1 x 22.5 kw scrubber fan for kitchen ventilation 407 supply, installation, testing and commissioning of cubical type sectinalised floor standing switch board by cpri apprved firms of 18 mva fault capacity at 415 v complete with 4 strip, 200 a capacity aluminium bus bar electrolytic grade e 91, cable alley, switchgears suitable for ac 23 duty & of following capacity & as per specification given in the tender. 408 incomer 409 160 a 4 pole mccb with ( 0 160a ) ammeter with three ct and selector switch, ( 0 500 v ) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. set 01 410 outgoing 411 a ) for air washer fan motor of 1 x 15 kw 412 63 a tpn mcb with 32 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 60a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 01 413 b ) for air washer pump 414 16 a sp mcb, set 1 415 c ) for scrubber fan motor of 22.5 kw 416 100 a tpn mcb with 45 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 100a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 01 417 controls & interlocking accessories as required. lot 418 for parking ven fan motor ( 2 x 9.3 / 7.5 / 5.5 kw with vfd + 2 x 9.3 / 7.5 / 5.5 kw without vfd + 6 / 8 nos dual speed jet fan motor 0.24 / 1.2 kw ) . 419 note: actual kw & number of fans shall be as per approved shop drawings. details given above are for guideline only ) quoted price shall remain fixed. 420 supply, installation, testing and commissioning of cubical type sectinalised floor standing switch board by cpri apprved firms of 18 mva fault capacity at 415 v complete with 4 strip, 160 a capacity aluminium bus bar electrolytic grade e 91, cable alley, switchgears suitable for ac 23 duty & of following capacity & as per specification given in the tender. 421 incomer 422 100 a 4 pole mccb with ( 0 100a ) ammeter with three ct and selector switch, ( 0 500 v ) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. set 01 423 outgoing 424 a ) for 2 nos. fan motor of 5.5 kw without vfd 425 40 a tpn mcb with 25 a dol starter, overload relay, start / stop push buttons, ammeter ( 0 40a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 02 426 b ) for 2 nos. fan motor of 5.5 kw with vfd 427 40 a tpn mcb. set 02 428 controls & interlocking accessories as required. lot 429 c ) for 6 / 8 nos dual speed jet fan motor 0.24 / 1.2 kw 430 32 a tpn mcb 2 x 12 a dol starter, overload relay, start / stop push buttons, ammeter ( 0 30a ) with single ct, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch.set 6 / 8 431 controls & interlocking accessories as required. lot 432 for fan motor, 4 x 11 kw air washer fan + 3 x 11 kw fan for dg room ventilation 433 supply, installation, testing and commissioning of cubical type sectinalised floor standing switch board by cpri apprved firms of 18 mva fault capacity at 415 v complete with 4 strip, 250 a capacity aluminium bus bar electrolytic grade e 91, cable alley, switchgears suitable for ac 23 duty & of following capacity & as per specification given in the tender. 434 incomer 435 200 a 4 pole mccb with ( 0 200a ) ammeter with three ct and selector switch, ( 0 500 v ) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. set 01 436 outgoing 437 a ) for air washer fan & exhaust fan motor of 7 x 11 kw 438 a ) for air washer fan & exhaust fan motor of 7 x 11 kw 439 63 a tpn mcb with 25 a star delta starter, overload relay, start / stop push buttons, ammeter ( 0 60a ) with three ct & selector switch, on / off / trip indication lights with sp mcb, single phase preventer & auto / manual mode selector switch. set 07 440 b ) for air washer pump 441 16 a sp mcb, set 2 442 controls & interlocking accessories as required. lot 443 single phase mcb for vav / fcu / inline fan 444 supply, installation, testing & commissioning of single phase mcb of following capacity: 445 16 a sp mcb, set 01 ( uppwd 1002 ) 446 isolators 447 63 a 3 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition. ( uppwd 1006b + 1033 ) 448 63 a 6 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition. ( uppwd 1007b + 1033 ) 449 40 a 3 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition. ( uppwd 1006a + 1033 ) 450 power & control cabling 451 supply and laying of aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 452 power cabling 453 for chiller 454 3.5c x 400 sq. mm ( rate for single run ) uppwd 501 ( t ) 455 for motor up to 5 hp each 456 3c x 4 sq. mm ( rate for single run ) uppwd 501 ( d ) 457 for 7.5 hp motor each 458 3c x 6 sq. mm ( rate for single run ) uppwd 501 ( e ) 459 for 10 to 15 hp motor each 460 3c x 6 sq. mm ( rate for single run ) uppwd 501 ( e ) 461 for 20 & 25 hp motor each 462 4c x 16 sq. mm ( rate for single run ) uppwd 501 ( i ) 463 for 30 hp motor each 464 3.5c x 25 sq. mm ( rate for single run ) uppwd 501 ( j ) 465 for 40 & 50 hp motor each 466 3.5c x 35 sq. mm ( rate for single run ) uppwd 501 ( k ) 467 for 60 hp motor each 468 3.5c x 50 sq. mm ( rate for single run ) uppwd 501 ( l ) 469 for 75 hp motor each 470 3.5c x 70 sq. mm ( rate for single run ) uppwd 501 ( m ) 471 for inline fan / fcu / vav 472 3c x 2.5 sq. mm copper 473 b ) control cabling ( pvc insulated copper conductor of 1.1 kv grade armoured cable ) 474 3c x 1.5 sq. mm 475 4c x 1.5 sq. mm 476 5c x 1.5 sq. mm 477 junction box for vav / fcu / propeller / inline fan etc ( single phase ) 478 supply, installation, testing & commissioning of 4 x 3 x 3 g.i. box with modular type 6a socket & switch, modular cover plate etc as required at site. 5 / 6 a 3 pin modular switch schoket. ( dsr 2018 1.31 ) 479 starter for propeller / inline fan ( single phase ) 480 supply, installation, testing & commissioning of modular type single phase motor starter up to 6a ( rating shall be as per motor ) including 3 x 3 x 2.5 g.i. box with modular, modular cover plate, conduiting and wiring from starter to fan etc as required at site. 481 note: 482 the ac contractor shall provide fire shunt relay contact in his panel wherever necessary along with auto / manual mode selector switch in the outgoing feeder for ahu fan, ventilation & pressurization fan etc. to take fire input signal ( potential free contact ) . cost shall be included in the panel price quoted by him. 483 earthing strip / wires as per specs. 484 supply & laying of 32 x 6 mm gi strip recess / surface as strip earth lead including soldering etc. as required. ( dsr 2018 6.14 ) 485 supply & laying of 25 x 6 mm gi strip recess / surface as strip earth lead including soldering etc. as required. ( dsr 2018 5.15 ) 486 supply & laying of 6 swg gi wire or in recess for loop earthing as required. ( dsr 2018 5.16 ) 487 supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality. uppwd 1136 488 fabricating and installing following size of perforated m.s. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with m.s. suspenders and including painting with powder coating etc as required. ( dsr 2018 4.1 ) 489 100 mm wide x 50 mm x 1.6 mm ( dsr 2018 4.1.1 ) 490 150 mm wide x 50 mm x 1.6 mm ( dsr 2018 4.1.2 ) 491 300 mm wide x 50 mm x 1.6 mm ( dsr 2018 4.1.4 ) 492 450 mm wide x 50 mm x 2 mm ( dsr 2018 4.1.6 ) 493 600 mm wide x 50 mm x 2 mm ( dsr 2018 4.1.7 ) 494 part vii bms work: all the items listed below shall include supply, installation, testing & commissioning. 495 software and operator workstation 496 host pc comprising core i7 processor or later, 3 ghz, 8.0 gb ram, 1 tb hdd, dvd drive, 6 nos. usb port, 18.5 svga color flat tft monitor, keyboard, mouse and pre loaded windows 8 operating system and anti virus software, laserjet printer ( a4 size, b / w ) 497 supply, installation, testing & commissioning of the following web based graphical software. providing facilities to create static & animate the graphics, navigation between the pages, display of logs, changing the time zones, popup alarms with single user license & point capacity as per i o summary with 20% spare points configurable password protection for the system and should be able to communicate with bacnet / m bus / lonwork & modbus devices simultaneously. this software will act as web server & no additional license should require at client side. 498 application software for building automation system having facility to to exchange information using sql database. software shall have the features to calculate the total power consumption, total refrigeration load consumed on every day etc. critical alarms generated in a day and its status should also be mailed along with daily report. 499 supervisory controllers 500 network area / supervisory controller for building management system ( bms ) . network area controller shall support communication with ac plant controllers ( ddc controllers ) & other application controllers on bacnet, shall support communication with integrator units as defined below on bacnet / modbus / lonworks. router must be compliant with ansi / ashrae 135 2012 ( rev. 1.10 ) 501 direct digital controllers ( bacnet / lon type ) 502 stand alone, intelligent, ul listed, btl listed & btl tested, ansi / ashrae approved interoperable ddc as per the specifications. all the controllers shall be ul / btl tested & ce certified. each controllers shall be equipped with universal inputs with a maximum polling speed of 100 ms. ddc controller shall have a resident real time clock with a battery back up. ddc must support trending & scheduling at controller level.the controller shall be housed in a vandal proof, lockable and secure ms cabinets to be supplied along with controllers. ddc must match bacnet profile b bc ( building controller ) / b aac profile as per btl listing. the controller shall have 15% extra io capacity. 503 each of the following systems shall have seperate multiple controllers, as required. the ddc selection shall be based on i o summary as given in the tender. 504 for chilled water system chillers, chw & cdw pumps, cooling towers, hwg, hw pumps & headers etc. as required. 505 for air handling units as per io summary as required. ( 2 nos. ahu with 1 no. ddc ) 506 for all 3 phase fans fresh air / exhaust air fan, airwasher, scrubber, pressurisation fan etc. as required. ( 4 no. fans with 1 no. ddc ) 507 for lift well, lift lobby & staicase pressurisation fans ( 4 nos. fans with 1 no. ddc ) 508 field instruments as per i o summary 509 immersion temperature sensor with thermowell for chilled water system ( 3 nos. chiller outlet, 1 no. chilled water header, 1 no. condenser water return header ) 510 ambient air temperature and humidity sensor 511 current relay for pumps ( 3 nos. primary chw pumps, 3 nos. cdw pumps, excluding pumps on vfd ) 512 differential pressure switch for various vent. fans excluding inline & propeller fans 513 differential pressure switch for ahu blower status 514 differential pressure switch ahu pre filter status 515 temperature, rh & iaq monitor 516 standalone, networkable temperature, rh & iaq monitor along with single / multiple touchscreen display in each ahu room which will have modbus protocol inbuilt as a standard, iot & webserver option for remote monitoring, inbuilt memory of 1 gb to monitor & datalog co2 level ( 0 5000 ppm ) , o2 level ( 0 25% vol o2 ) , pm1, pm2.5, pm10 , voc ( 0 30 ppm of etoh ) , 2 nos. temperature sensor ( 10 to 60 deg c ) for ahu supply & return air temperature monitoring i.e. at supply for chilled water modulation & at return air stream for ahu vfd modulation, humidity parameters ( 0 100 % non condensing ) & shall work on 24vac / dc. 517 integrators for third party systems on bacnet / modbus / lonworks / opc / m bus and other industry standard open protocols for the following third party systems. integrator should have dedicated one lon, rs 485 & rs 232 port with minimum of 96 mb storage.integrator should be able to store trending to ensure gap free storage.the third party integrator should be from the same manufacturer as that of ddc. 518 chillers on bacnet / modbus / lonworks 519 variable frequency drives on bacnet / mstp, modbus rtu over rs 485 520 cabling and conduiting 521 communication & signal cabling 2c x 1.5 sq. mm shielded tinned copper cable. approve aor 522 ms conduit 25 mm for signal & communication cable ( dsr 2018 1.20.2 ) ...

North Eastern Railways - Uttar Pradesh

24671979 supply of , split air conditioner inverter based hot and cold high wall split ac, nominal cooling capacity in ton (kcal/hr): 2.0 ton/6000 (kcal/hr), coil material: copper, bee star rating :5 , conformity to indian standard is: 1391/pt 2 or latest, including ac with outdoor unit with iron stand , suitable for operation on 230 volts, 50hz, single phase ac supply. make/brand voltas, carrier, daikin, hitachi, lg, samsung., supply of split type air conditioner fitted with rotary compressor capacity 2 ton,cooling capacity 6000 k cal/hr,bee star rating 3,coil material copper,eco friendly refrigerant copper pipe length minimum 3 meter with iron stand suitable for operation on 230 volt/50 hz ac supply. warranty on machine 01 years. warranty on compressor 05 years...

Northern Railway - Uttar Pradesh

24664155 supply of , isi marked rotary compressor capacity 2.0 ton suitable to work on 230 volts ac,50 hz, single phase ac supply.the comprerssor shall be conforming to is:10617/1983 or latest....

Northern Railway - Uttar Pradesh

24664139 supply of , isi marked rotary compressor capacity 1.5 ton suitable to work on 230 volts ac,50 hz, single phase ac supply.the comprerssor shall be conforming to is:10617/1983 or latest....

Northern Railway - Uttar Pradesh

24387154 supply of , isi marked rotary compressor capacity 1.5 ton suitable to work on 230 volts ac,50 hz, single phase ac supply.the comprerssor shall be conforming to is:10617/1983 or latest....

Northern Railway - Uttar Pradesh

24387153 supply of , isi marked rotary compressor capacity 2.0 ton suitable to work on 230 volts ac,50 hz, single phase ac supply.the comprerssor shall be conforming to is:10617/1983 or latest....

Research Designs And Standards Organisation - Uttar Pradesh

24326783 supply of , supply, installation fixing testing & commissioning of 1.5 tr split ac fitted with rotary compressor & copper condenser, environment friendly refrigerants such as r 32,r 410,r 134a etc,star rating 3 (minimum), color:white, maximum ambient temperature:46 degree cent.(minimum) with stand for outdoor unit pipe pressure testing drain pipe etc.each unit should be provided with remote complete in all respect as required. make hitachi, daikin, o general , blue star. warranty 1 year on product & 5 year on compressor....

Research Designs And Standards Organisation - Uttar Pradesh

24326743 supply of , supply, installation, connection, testing &commissioning of 02 tr split ac with rotary compressor & copper condenser environment friendly refrigerants such as r 32, r 41,r 134a etc. star rating 3 (minimum) colour white maximum ambient temperature 46 degree centigrade (minimum) with stand for outdoor unit pipe pressure testing drain pipe etc. each unit should be provided with remote complete in all respects as required.( legal cell). make hitachi,dikin,o general. warranty 1 year on product & 5 year on compressor....