Secretariat Administration Department - Uttar Pradesh

37971917 tender for supply of branded food and non food items. country ghee celery pickle khatai powder dosa mix biscuits ( sweet / salty ) tea leaf khaman / dhokla green label chai black pepper powder butter gram flour baking powder boondi baked beans cornflakes chili powder chaat masala chana masala chickpeas masala coffee coffee custard powder thing cherry tin chili sauce corn flour chips ( small / medium / large ) chocolate powder coriander powder porridge noodle garam masala matar packet rose water etc.. refer the document form mere details...

Rural Engineering Department - Uttar Pradesh

37970092 tender for construction of computer lab / room at g.g.i.c. manpurhari, mainpuri 1 excavation in foundation in ordinary soil (loam, clay, or sand ) includinglift upto 1.50 m and lead upto 30m including filling watering and raming of excavated earth into the trenches or into the space between the building and the sides of foundation tranches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches. sino.251 2 antitermite treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart @ 100 nos holes per 9.00 sqm. including drilling 12 mm diameter holes and plugging also to match the floor properly : with chlorpyriphos / lindane e.c. 20% with 1 3 providing and laying cement . concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded brick ballast aggregate 40 mm nominal size ) includingsupply of all materials , labour and t & p etc. required for completion of work and curing complete , including cost of form work . in foundation and floors. s.i. no. 273(a) 4 providing and laying cement . concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded brick ballast aggregate 40 mm nominal size ) includingsupply of all materials , labour and t & p etc. required for completion of work and curing complete , including cost of form work . in foundation and floors. s.i. no.3/4.1 5 class m 150 brick work in 1:6 cement and coarse sandmortar in foundation and plinth including supply of all material labour and t&p etc. required for proper completion of work. s.i. no. 1/6.1 6 earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 3 km lead. the earth in form of cutting to be used as spoil banks within 50m distance as directed by the engineer in charge. si no.253+253(d) 7 rcc work providing and laying in position specified grade of reinforced cement concrete in raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).si no.10/5.1 8 rcc work providing and laying in position specified grade of reinforced cement concrete,slab including the cost of centering, shuttering, finishing and excluding reinforcement above plinth level upto fifth floor level in :1:1.5:3 (1 cement : 1.5 coarse.si no.11/5.1 9 mild steel or iron work in plain work such as reinforced concrete or rinforced brick work ( when not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the suplly of steel and its wastage bend. hooks and authorized over lapping shell be muasured upto floor to level. (for12 mm.) s.i no 504 10 class m 150 brick work in 1:6cement and coarse sand mortar in super structureincluding supply of material labour and t&p etc. required for proper complition of work. s.i.no.6.1+6.8a 11 class 150 (non modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work.si no.6.1+6.8a 12 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.si no.7/13.5 13 12 mm. cement plaster in (1:4) cement and coarse sand in singlecoat onfairside of single or half brick wall for interior plastring upto floor to level including internal rounded angles chamfers , and/ or rounded angles not exceeding 80mm in girth and finished even and smooth. no extra mixing any additive. s.i. no. 2/13.4 14 mild steel and iron work of small size and section such as holding down woods, hold fasts tierods, grating, etc. (when not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing.si no.502 15 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter. 16 supply and fixing of flush doors, commercial quality conforming of i.s. 2202 part 1 (1983) including isi marked oxidized iron fitting with screws, bolt hinges,handles,siliding bolt, door stopper and tower bolt etc.32 mm thick. 17 supply and fixing fly and mosquitos proof stainless steel grade 304 wire mesh gauge with 0.50mm dia wire and 1.40mm wide aperture and including supply of c.p. teakwood batten 8cmx1cm (3x3/8)/flat iron 25mmx4mm and including supply of necessary screws all materials, labour, t&p etc. required for proper completion of work.ch.9,si no.18/455(a) 18 cementconcreteflooring1:2:4(cement ,c/sand and 12.5 mm stone grit) lai in one layer finished with floating coat of neat cement .(25 mm thick floor) 19 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor).ch.14,si no.5/665 20 providing and fixing glass strips of 4mm thick in joints of floor and skirting at the time of laying including labour, t&p etc. complete in all respect.(2.2mm thick)si no.25/631 21 finishing walls with pop approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, t&p etc. required for proper completion of work.ch.15,si no.30 22 distemperring with oil bond distemper of approved brand(three coats) and of required shade on undecorated wall surface to give an even shade over and including priming coat whiting after thoroughly brushing the surface free from dropping andother foreign matter including preparing the surface even and sand papered smooth.s.i. no. 13/649.+650 23 distemperring with oil bond distemper of approved brand(two coats) and of required shade on undecorated wall surface to give an even shade over and excluding priming coat after thoroughly brushing the surface free from dropping andother foreign matter including preparing the surface even and sand papered smooth.s.i. no. 14/650 24 painting two coat over priming coat on newsteel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 sq.m. in area with superior synthetic enamel such as luxol 3, hi gloss apcolite, superlac, dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.si no.641+19.29+642 25 painting two coats on new surface of wood with superior synthetic enamel such as luxol3, hi gloss apcolite,superlac,dulux spesified brusing to give and even shade and including the cleaning the surface of all dirt, dust and other foraign matter sand papering and scraping including cost of all materials, labour and t & p etc. required for proper complition of work. s.i. no.641+19.73+642 26 making grooves 10 to 12mm wide x 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. 27 s/f marble stone patiya etc. all complete. 28 wiring point for light with 1.5 sq.mm.frlshpvcinsulated multistrand single core copper conductor cablein pvc conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside,gp box, piano type switch & ceiling rose/angle/batten holder on 3mm thickphenolic laminated backalite sheet etc complete in all respect as directed including matching colour wash.si no. 138 c 29 wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting,complete with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside,gp box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.si no. 140 c 30 wiringpointforplugwith 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable inpvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcementbefore concreting, complete with 1.5 sq. mm.frlsh pvc insulatedmultistrandcopperconductorcable asearthwire drawninside the conduit. and piano typeswitch and socket etc., complete in all respect including matching colour wash. si no. 141 c 31 supply and fixing of power plug with 20 amp./250 voltflush type modular switch and 5 pin 20 a/250 volt flush type universal modular socketswitch on concealed m.s boxincluding supply of all material, labour t&p etc. required for proper completion of work. si no. 1139 a 32 s/f ofcomputer point with2 no. 5amp. 5 pin plug with switch and socket on concealed m.s. box including supply of all material, labour t&p etc, required for proper completion of work for computer. si no. 2 *(141c) 33 supply and fixing of electronic fan regulator( modular) 120 280 v. isi marked, on the existing switch board including making connections, required material, labour t&p etc. for proper completion of work to the satisfaction of engineer in charge of work. si no. 1203 c 34 supply and fixing ofled tube light with batten suitable for up to 1 x 22 watt led tube light fittingincluding tube on surface complete in all respect. si no. 1413a cat a 35 supply and wiring of submain with two number2.5sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) pvc conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with 1 nos. 1.5 sq. mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduitetc, complete in all respects including matching colour wash. si no. 1307 c 36 s & f surface/flush mounting 12 ways spn distribution board with additional metal doorwithout mcb complete in all respect, asdirect by engineer in charge. s.i. no. 1025 a cat b 37 s&f of 6 amp to 32 amp. spmcb (10 ka) c curve si no. 1002 cat a 38 s&f of 32amp. dp mcb (10 ka) c curve si no. 1009 cat a 39 supply and fixing hexagonal/roundg.p.fan box of approved make made up of 1.0 mm thickisi marked g.p.sheet spot welded four to eightholes of 25.4 mm for pipe entryof the box. holes should be semi shuttered type with 0.5 mm g.p. sheet made upper & lower cover duly screwed fitted with 300 mmround zink coted m.sbar x 12 mm& brand name should be embossed. fixing with wiring conduit laid in the r.c.c. roof before concretingalongwith supply of all material, labour, t&p etc. required for proper completion of the work. si no. 1149 40 supply of bee 5 star rated 1200mm sweep ceiling fans with fan motor of a.c permanent insulation,capacitor rating confirming bee 5 star rating and is:374/79 and also comply with is:1709/1984 with latest amendment. the rated voltge 220/240 volts, 50hz, 1 ph ac the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. si no. 1501 (i) 41 erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick g.i.pipe19mm dia. duly painted, complete in all respect. si no. 1116 42 add for invertor wiring in wiring point for light/ fan/ plug with 1.5 mm cu wire si no. 189 ...

Baghpat Cooperative Sugar Mills Limited - Uttar Pradesh

37947207 supply of electrical material for year, 2023 24 , supply ofelectrical material , angle holder ,arkay./anchore , bakelite pendent holder (p.t.) , s.t. holder 100 w 230 volt national make. , s.t. holder 300 w 230 volt national make. , s.t. holder 500 w 230 volt national make. , brass pendent holder ssk 2 pin , brass pendent holder ssk 3 pin , pvc wire diff. size vidyut make quote as per price list offering max. discount , tube light side holder i.s.i. make , tube light holder stand single i.s.i. make , tube light holder stand double i.s.i. make , tube light starter holder i.s.i. make , condensor 2.5 mfd oil filled local & i.s.i. make , condensor 4 mfd oil filled local& i.s.i. make , condenser 6 mfd oil filled local & i.s.i. make , tong tester, 1800 amp. model m 266 , insulating varnish v 155 doctor beck make , insulating varnish thinnerv 155 for doctor beck make , insulating varnish lumlft 1 a doctor beck make , insulating varnish bectrol red dr. beck make , insulating varnish bectrol red thinner for dr. beck make , benzeen , corrigan tube dowels make , cable epoxy jointing kit for 660/1100 volt size 3x95mm2 , cable epoxy jointing kit for 660/1100 volt size 3x240mm2 , cable epoxy jointing kit for 660/1100 volt size 3x400mm2 , p.v.c. tape ¾” steel grip , white petrol , nicrome wire 22 swg , cotton tape ¾”i.s.i. , cotton tape 1”i.s.i. , empire tape ¾” i.s.i. , empire tape 1” i.s.i. , glass tape ¾” i.s.i. , glass tape 1” i.s.i. , glass varnish tape ¾” i.s.i. , glass varnish tape 1” i.s.i. , c.t.c. bottle 250 ml i.s.i. make , amp. meter 0 200 amp. size 4”x4” flesh type ctr 200/5 a.e. make , amp. meter 0 300 amp. size 4”x4” flesh type ctr 300/5 a.e. make , amp. meter 0 400 amp. size 4”x4” flesh type ctr 400/5 a.e. make , amp. meter 0 500 amp. size 4”x4” flesh type ctr 500/5 a.e. make , amp. meter 0 600 amp. size 4”x4” flesh type ctr 600/5 a.e. make , amp. meter 0 800 amp. size 4”x4” flesh type ctr 800/5 a.e. make , amp. meter 0 800 amp.size 144x144 mm flesh type ctr 800/5 a.e. make , power factor meter size 144x144mm for 1500 kw alter nator jyoti make , amp. meter 144x144 mm, 0 3000 amp. ctr = 3000/5 a.e. make , frequency meter size 144x144, for 1500 kw alternator jyoti make. , volt meter 0 500 volt, 4’x4” flesh type a.e. make , ctr 200/5, a.e. make , ctr 300/5, a.e. make , ctr 400/5, a.e. make , ctr 500/5, a.e. make , ctr 600/5, a.e. make , ctr 800/5, a.e. make , ctr 3000/5, a.e. make , h.t. tape ¾” i.s.i. make , plastic cooling fan for 5 hp motor k.e.c. make , plastic cooling fan for 7.5 hp motor k.e.c. make , plastic cooling fan for 10 hp motor k.e.c. make , plastic cooling fan for 12.5 hp motor k.e.c. make , plastic cooling fan for 15 hp motor k.e.c. make , plastic cooling fan for 20 hp motor k.e.c. make , plastic cooling fan for 25 hp motor k.e.c. make , cooling fan for cane un loader motor 30 hp, 960 rpm, crompton make , e core for 3ta21 siemens make , e core for 3ta22 siemens make , e core for 3ta24 siemens make , e core for 3ta28 siemens make , hand gloves shock proof 11000 line work , heater plate 8” , bakelite finger, 3ta 22 , bakelite finger, 3ta 24 , pino type switch 5 amp. i.s.i. , pino type switch 15 amp. i.s.i. , tumbler switch 5 amp. k 555 make , tumbler switch 15 amp. k 555 make , 3 pin top 5 amp. i.s.i. , 3 pin top 15 amp. i.s.i. , 3 pin socket 5 amp. i.s.i. , 3 pin socket 15 amp. i.s.i. , plug switch combined 15 amp. i.s.i. , heater rod 10” i.s.i. , heater rod 12” i.s.i. , heater element 1500 watt i.s.i. , change over switch 4 pole 63 amp. canebar make , change over switch 4 pole 100 amp. canebar make , change over switch 4 pole 200 amp. canebar make , change over switch 4 pole 400 amp. canebar make , change over switch 4 pole 630 amp. canebar make , m.c.c. box 63 amp. 4 pole i.s.i. , m.c.c. box 32 amp. 4 pole i.s.i. , simple spn 6 way i.s.i. , m.c,b. 25 amp. 2 pole, i.s.i. , m.c,b.32 amp. 2 pole, i.s.i. , m.c,b. 63 amp. 440 volt 2 pole, i.s.i. , m.c,b. 10 amp. 2 pole, i.s.i. , sp switch 5 amp. i.s.i. , i.c.t.p. switch 63 amp. 440volt standard make , i.c.t.p. switch 32 amp. 440 voltstandard make , i.c.d.p. switch 63 amp. 230 volt standard make , i.c.d.p. switch 32 amp. 230 volt standard make , porceline kit kat 16 amp., i.s.i. , porceline kit kat 32 amp., i.s.i. , porceline kit kat 63 amp., i.s.i. , porceline kit kat 125 amp., i.s.i. , bakelite kit kat 16 amp., i.s.i. , bakelite kit kat 32 amp., i.s.i. , bakelite kit kat 63 amp., i.s.i. , bakelite kit kat 125 amp., i.s.i. , promexivity switch jai sree make output pnp(no) voltage 24v dc 1” , promexivity switch jai sree make output pnp(no) voltage 24v dc 2” , rotary switch 63 amp. thakur make , selector switch for 10 amp. , digital clamp meter mico make 1000/1200 volt , crimping machine 16mm2 to 400mm2 jainson make , push button station 1 no +1nc with box , e. core ml 10/12 , e.core ml 2/3 , digital r.p.m. meter, 0 1500, 0 10 v. , digital amp. meter 4” dia 1500 rpm 0 100 , slipring for 170 hp, gec motor, 180mm.x70mm.x120mm , arch chamber for 3ta 28, siemens make , arch chamber for 3ta 24, siemens make , arch chamber for 3ta 22, siemens make , phase testor 230 volt taparia make , telephone cable 2 pair, i.s.i. make , shunt relay for 400 amp. d.c. 76 mv , carbon brush holder with glass sleeve rod complete for crompton greaves alternator 180 kva , copper carbon brush for 170 hp, g.e.c. make, double tail, size 45x32x20mm, grade cb/m 145e allianze , carbon brush for 1500 kw, jyoti make exciter, size 20x32x65 grade ec 14 allinze , carbon brush for 1500 kw jyoti make alternator size 20x40x50mm, double tail, grade m 15 e allianze , carbon brush for integrated electric motor 135 kw out put speed 900 1350 d.c. drive c.f m/c motor size 40x32x12.5mm, grade eg 224 allianze , carbon brush motor 125 hp, gec make size 18x25x38 mm, grade m 145 e allianze , carbon brush for cane unloader motor 12.5 hp, crompton make, size 12x15x25mm, grade 145 e , brass holder for 170 hp, slipring motor, gec make , carbon brush for 220 hp, gec make motor , size 20x40x50mm, double tail, grade m15e allianze make , carbon brush motor 150 hp, size 15x20x40mm, grade m 145e , carbon brush 250 hp, jyoti make motor, size 16x32x38mm.. double tail, grade 145e allianze make , carbon brush for 250 hp, aei make motor, size 20x32x40mm, double tail, grade m 145e , carbon brush for grinder, gq 4 wolf make , carbon brush for grinder, gq 6 wolf make , carbon brush for welding set big size. 25x20x40 mm, allianze make , carbon brush for welding set big size 8x20x40mm, allianze make , glass fuse 0.5 amp., , glass fuse 5 amp., , glass fuse 7 amp., , heavy duty foot switch for sugar bag stiching machine 2no+2nc , power capasitor 25 kvar 440 volt asian make , g.i. wire 2, 4, 6 swg , ceilingfan 48” crompton make , sunmica sheet 10”x12” , sunmica sheet 7”x4” , p.v.c. round block , electronic fan regulator , 2 pin plug socket 5 amp.with box , ceiling rose , padestal fan heavy duty 18” , a.c.s.r. weasel conductor , brass heavy duty battery terminal i.s.i. make , hand drawn copper wire for s.w.g. , c.r.c. 26m 415 ml , musroom push button red & green , element for above 10 amp. 500 v. 1no+1nc, vishnoo make. , auxilary contact, 3ta 24 , seperator 3ta 24 , holder forhologen 500 watt , holder forhologen 1000 watt , metallic carbon bush double tail, 25x50x65mm , volt meter 0 500 volt, 6x6” flesh type a.e. make , metallic carbon bush double tail, 22x32x45mm , carbon bush double tail, 15x30x40mm , carbon bush double tail, 15x32x40mm , carbon bush double tail, 16x32x45mm , carbon bush double tail, 18x25x38mm , pure carbon bush double tail, 20x40x50m , e core. ml 4 , e core , ml 6 , leatheriod paper diff. sizes , film paper white, diff. sizes , glass fules diff. amp. , mcb, 63 amp.3 phase,havels make , jaw contact credlethacb 4000 amp. , jaw contact credlethacb 3200 amp. , jaw contact credlethacb 2000 amp. , jaw contact credlethacb 1600 amp. , f.b. switch 400 amp. , led flood light 50 watt/100 watt , led bulb 9 watt havelles make , led bulb 12 watt havelles make , led tube light 20 watt havelles make , led tube light 36 watt havelles make , amp. meter4 x 4, 100 amp. , tension spring , crimping paste , wall fan 450 mm,havelles make , push button on/off for cane unloader , slipring holder for 150hp, 960 rpm injection motor as per sample , slipring holder for 1250 ‘a’ dc drive motoe as per sample , slipring for 220 hp, 980 rpm crompton greaves slipring motor cw355m as per sample , insulator for cane unloader line as per sample , foot switch cat. no. fsgy1 single pole pilot duty 600v, ac break 5amp. make 8amp. dc single throw 0.1amp., double throw 0.2amp. ( bharti cutler hammer make) , switch element for above foot switch (2no 2nc), ( bharti cutler hammer make) , flat submersible copper cable 10mm2, 3 core. , brass holder for 150 hp slipring motor , foot switch 1no+1nc bch make , element for above , indicating led lamp 220v ac , switch pf 63 amp. , bakelite rod 30mm x 1 mtr. , led bulb 40 watt crompton make , cfl 85 watt halonix make , halogen tube 500 watt crompton make , halogen tube 1000 watt crompton make , timer bidca x(0 60sec.) on/off , spare contactor size 4 , mcb box 40 amp. dp , isolator 40 amp. dp , glass sleeve 3mm , glass sleeve 4mm , glass sleeve 6mm , glass sleeve 8mm , led street light fitting worm white 45/50 watt , base plate 3ta24 , no volt coil 3ta24, 220 v , no volt coil 3ta24, 415 v , moving bakelite 3ta24 , auxiliary contact 3ta24 , slipring holder for 1.5 mw, jyoti make alternator...

North Eastern Railways - Uttar Pradesh

37915542 auction sale of all kinds of unserviceable scrap,comprising electrical accessories, domestic electrical appliances, led light, street light, ceiling light, small/big hylogen, tube light fitting, mcb with box, main switch, junction box, electronic chock, all types of capacitor, cfl, led bulb, electrical fittings, switch, socket, fl fitting, power switch/socket, ceilling rose, electronic regulators, relay timer, different types of mcb, lcb with boxes, change over switch, tube light, led tube light, led street light fitting, electronic tv stabiliser, led tube light fittings, d.p. switch, integrated circuit plates, d.p. box, button/angle and pendent holder, train light fitting, berth light, head lighting board, solar pannels, coach pannel board, lighting board, cooler with or without motor, small battery/mobile charger, etc., in different sorts of sizeswith or without negligible nf attachememnt and this scrap also included other known or unknownelectrical items.location: in godown no ? 98 04lbpl, dbaw,gst 18%, tcs 1 %,hsn 72044900, allocation 20714208...

Bharat Petroleum Corporation Limited - Uttar Pradesh

37888715 discount e tender for nro at village dasna, nh 24, ghaziabad 1 cables etc. : 1 ( a ) cables 1 ( a ) cable glands 2 wires, switches, accessoires etc. : 2 ( a ) frls pvc wire 1.5 / 2.5 / 4.0 / 6.0 sq. mm. 2 ( b ) switch, socket, modular plate, switch box, button holder, angle holder, ceiling rose accessories 2 ( c ) pvc pipes & fittings 1.5mm thickness / 20 to 25mm diameter 2 ( d ) hd pvc pipes & fittings : ( isi quality : 6.00 kg / sq.cm. ) ( 50 / 75 / 100mm diameter ) 2 ( e ) telephone wire : twisted pair wire of 02 pairs 3 distribution board / swithches etc. : 3 ( a ) distribution board 3 ( a ) mcb / elcb / mccb etc. 4 ( a ) change over switch 4 ( b ) volt meter / ammeter / selector switch / indicator 4 ( c ) hrc fuse base & link 4 ( d ) switch fuse unit / fuse switch 4 ( e ) light luminaries 4 ( f ) fan / exhaust fan4 ( a ) change over switch 4 ( b ) volt meter / ammeter / selector switch / indicator 4 ( c ) hrc fuse base & link 4 ( d ) switch fuse unit / fuse switch 4 ( e ) light luminaries 4 ( f ) fan / exhaust fan etc...

Indian Army - Uttar Pradesh

37850744 supply of medicines to mh re 06 , prednisolone 20 mg tab , isoxsuprine 10mg tab , levonorgestrel 0.25 mg+ethinylestradiol 0.03mg (pack of 21 tab) , micronised progesterone 100mg inj , oxytocin 5 units per 1.0 ml amp inj , magnesium sulphate 50% w/v inj , sitagliptin 100 mg tab , glipizide 5mg tab , tab vildagliptin 50 mg , human chorionic gonadotrophin 2000 iu inj , neostigmine 0.5 mg, 1 ml inj , succinylchloline chloride 50 mg/ml, 2 ml inj , tab alpha keto analogue of aminoacids , cream luliconazole, tube of 15 gm , prochlorperazine maleate 5mg tab , syp azithromycin 200 mg per 15 ml , iron drops paediatric. each ml contains ferrous fumarate (containing 10 12.5 mg elemental iron), folic acid (0.1 0.5 mg) & vit b12 (3 10 mcg), bottle of 15 ml , syrup calcium phosphate (80 mg/5 ml), 200 ml bottle , bupropion hcl 150 mg sr tab , buspirone hcl 10 mg tab , clonazepam 0.5 mg tab , duloxetine 20 mg tab , lorazepam 1 mg tab , memantine 10 mg tab , escitalopram 5 mg tab , amitriptyline 75 mg tab , clonazepam 0.25 mg tab , desvenlafaxine 50 mg tab , etizolam 0.5 mg tab , acamprosate 333 mg tab , atomoxetine 10 mg tab , mirtazapine 30 mg tab , cylinder carbon dioxide (co2) , cylinder nitrous oxide (n2o) , cylinder oxygen (o2) 1246 ltr , cylinder oxygen (o2) 340 ltrs , cylinder oxygen (o2) 623 ltrs , cylinder oxygen (o2) 7000 ltr , sevoflourane , hcv tridot , hiv tridot , anti human glubulin anti sera , bovine albumin antiisera , anti h antisera , tab riboflavin 10 mg , leishmen stain (cytochrome) , giemsa stain (ready to use) , sysmax printer paper , kit ldh , kit ggt , kit ada , dpx (500 ml) , nichome wire loops , blood culture media bottle , chlorophorm , tmppd disc , opticichin disc , bacitractin disc , inmvic biochemical test kit , water culture media bottle )hi media test kit) , coplin glass jar , easlylite internal filling , erba wash solution , printer paper roll (elisa reader) robonik read well touch , kit t3 , gnb1 abst disc , gnpci abst disc , gpc ii abst disc , kit cpk , ethyl alcohol , anti a1 antisera , olanzapine 10 mg tab , venlafaxaine 75 mg tab , sertraline 50 mg tab , zolpidem 10 mg tab , quetiapine 25 mg tab , n acetyl cysteine 600 mg, tab , ipratropium bromide respirator soln 500 mcg/2 ml respule , dextrose monohydrate for oral use in pack of 100 gm with or without vitamins and minerals , dextrose 50%, 25 ml inj , dextrose inj 25%, 25 ml inj , sodium chloride 3% injection, bottle of 100 ml , darifenacin 7.5 mg tab , solifenacin 10 mg tab , alfuzosin 10 mg tab , anti phlebitis cream tube of 15 g/20 g , micronized purified flavonoid fraction of rutaceae 500 mg tab , micronised purified flavonoid fraction 1000 mg (daflon 1000) , terazosin 2 mg tab , oxybutynin 2.5 mg tab , calcium (9 mg) + calcium gluconate (50 mg) inj for iv use, 10 ml injection , vitamin d3 (400 iu/ml) drops , cough lozenges , fluticasone propionate cream 0.05% tube of 10 gm , methyl prednisolone sodium succinate 40 mg, inj , apremilast 20 mg tab , s adenosyl methionine 400 mg (sam e) tab , colchicine 0.5 mg tab , immunoglobulin intravenous 5 gm inj , amoxycillin 875 mg + clavulanic acid 125 mg tab , metronidazole inj for iv use containing 500 mg per bott of 100 ml , linezolid infusion 200 mg to 300 mg/100ml , inj doxycycline 100 mg , efavirenz 600 mg tab , zidovudine tab 300 mg , zidovudine 300 mg + lamivudine 150 mg + nevirapine 200 mg tab , lopinavir 200 mg + ritonavir 50 mg co formulation , syp zinc 20 mg/5 ml, bottle of 100 ml , iron syp pediatric each 5 ml containing elemental iron of 50 mg as iron polymaltose complex in 200 ml bottle , tab methotrexate 15 mg , paroxetine 20 mg cr tab , tenectplase injection 40 mg per vial , gliclazide 40 mg tab , human chorionic gonadotropin 5000 iu inj , human menopausal gonadotropin 150 iu inj , misoprostol 200 mg tab , norethisterone acetate 5 mg tab , vitamins d3 drops 800 iu/ml, bott of 15 ml , voglibose 0.3 mg tab , typhoid vi conjugate vaccine 2.5 ml , rabies vaccine , pneumococcal polysaccharide vaccine 23 valent, ppsv 23, 0.5 ml vial/pfs , test mantoux (sufficent for 10 tests) , tab aceclofenac+seratiopeptidase +pcm , tab amisulpride 100mg , tab amitriptalline 10mg , tab betamethasone 0.5mg , tab clotrimazole + clindamycin vaginal pessary , tab curcumin 250 mg+rose hip extract 275 mg+ undenaturated type 2 collagen 40mg+vitamin d3400iu , tab donepezil memantadine 10mg , tab estradiol 2mg , tab feropenem sodium 200mg , tab gliclazide 80mg , tab glucosamine 750mg + chondrontin sulphate 600mg , tab ivermectin 12mg , tab ketaconazole 200mg , tab lacosamide 50mg , tab mesalamine 800mg , tab co enzyme q 30 , tab rifaxamin 200mg , tab ropinerole 1mg , tab rosuvastatin 10mg , tab rosuvastatin 5 mg , tab sevelamer 800mg , tab soda bicarbonate 1g , inj hcg 5000 iu , inj progesterone 200 mg , tab common cold , tab apixaben 2.5 mg , tab apixaban 5 mg , tab secnidazole 1 gm , tab trihexiphenydyl 2 mg , inj heparin 25000 iu , syp bromohexine bott 100 , tab sunitinib 50 mg , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 500ml ffs , sodium chloride isotonic solution 100 ml self collapsible container ffs technology , amoxycillin 500 mg + clavulanic acid 125 mg tab , tab fluoxatin 20 mg , eye drop ciprofloxacin , pyrazinamide 500 mg tab , tab depagliflozine 10 mg , tab saraglitazar 4 mg , oint eberconazole 60 gm tube , tab rivaroxaban 10 mg , tab tramadol 50 mg , tab metaprolol xl 25 mg , salicylic acid foaming face wash 1% 60 ml , minoxidil 5 % lotion, bott of 60 ml , salicylic acid 3 5% and coal tar 1 3% soln, bott , desonide 0.05% bott of 30 ml , tacrolimus oint (0.01%) 20 gm tube , cream amorolfine nail lacquer 5% , gel tretinoin 0.025 % 20 gm => limited...

Purvanchal Vidyut Vitaran Nigam Limited - Uttar Pradesh

37842837 maintenance of ee edd office bansi district siddharthnagar 1 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by theengineer incharge within a distance of 60 metres. ( csi no. 15.03 ) 2 1st class brick ( class 150 ) work in 1:6 cement and coarse and ( f.m. 1.8 to 2.5 ) super structure including necessary cutting and moulding of brick as requird & also including honey comb brick thickness of wall 230mm. ( csi 6.01+6.07+6.08 ) 3 r.c.c. work with cement, approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1.5:3 in the slab excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. ( binding wire to be supplied by the contractor free of cost ) . ( c.s.i. no. 5.24 ) 4 water proofing treatment of roof by using eniroof e.m.b. highly elastomeric water proofing coating two coats, aquacrete 30% two coats, aquaguard 50% two coats, fibre glass, d.i. primer s.b.r. one coat, white cement and coarse sand including supply of all materials, labour and t&p etc. as required for proper completion of the work. ( nsi ) 5 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand ( 1:3 ) minimum thickness not to be less then 10 mm including supply of all material , labour and t&p etc for proper completion of work. ( csi no. 11.06 ) 6 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work. ( cement consumtion 0.044 bag / sq.m. ) ( csi no. 11.20 ) 7 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) ( csi no. 9.03 ) 8 r.c.c. work with cement, approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of door & window. ( c.s.i. no. 5.23 ) 9 local sand filling in plinth including supply of necessary quantity oflocal sand from outside the uppcl premises including watering, dressing etc. rate to include cost of all materials, labour and t&p etc. required for proper completion of work. ( csi no. 4.05 ) 10 concrete with 4cm gauge i class brick ballast ( class 150 ) , coarse sand ( f.m. 1.5 to 2.0 ) and cement in proportion of 8:4:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. ( csi no.5.04 ) 11 cement concrete work with cement approved coarse sandand2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from dalla, jhansi or other quarries and approved coarse sand in proportion 1:1.5:3including cost of all other materials labour and t&p. ( csi no. 5.21 ) 12 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, of size 600x600 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. completion required for proper completion of the work. ( csi no. 12.18 ) 13 s / f 8mm thick white glazed somany, johnson etcin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work ( csi no 12.11 ) 14 s / f 6 mm thick white glazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. ( csi no 12.12 ) 15 1st class brick ( class 150 ) work in 1:6 cement and coarse sand ( f.m. 1.5.to 2.0 ) . mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. ( c.s.i. no.6.01 ) 16 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer in charge within a distance of 60 metres. ( csi no. 15.01 ) 17 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5 meter ( 5ft ) and lead upto 30 meter ( 100 ft. ) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters ( 100ft. ) from the foundation trenches. ( c.s.i. no 4.01 ) 18 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mmx140mm hindustan make or other equivalent approved make of ist quality with 100mm dia. white glazed p or s trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour ( c.s.i.no. 27.01+27.23 ) 19 providing and fixing of 110 mm dia pvc pipe 4 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.18 ) 20 supply and installation of 0.5 hp kirloskar or equivalent makehorizontal, self priming, single phase , monoblock tullu pump including cost of labour, t&p and material required for completion of work. ( csi no. 19.30 ) 21 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. ( csi no. 26.12 ) 22 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.06a ) 23 providing and fixing 15 mm dia b class jindal, jtc, isi marked g.i. pipes complete with with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi 26.01a ) 24 as above item no. 23 but for 20 mm dia ( csi 26.01b ) 25 supply and fixing brass bib cock of heavy quality 15 mm dia ( 400 gms ) isi mark including supply of all materials, labour, t&p etc complete. ( csi 26.16a ) 26 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories ( low level ) including all materials, labour and t&p etc complete. ( csi 27.12 ) 27 providing and fixing 450 mm x 300 mm. wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) with r.s. or c.i bracket painted white 15 mm dia c.p. brass pillar cock with c.p. metal handle ( weight not less than 400 gms ) .i.s.i. marked and 32 mm dia c.p. brass chain with rubber plug, 32 mm dia c.p. brass waste standard pattern with check nut with 32 mm dia c.p. brass p or s trap and unions complete with p.v.c. connection 5 size including supply of all materials, labour and t&p etc. required for proper completion of the work and including cutting and making good the walls and floor with cement, coarse sand and grit fittings used should of superior quality. ( csi no. 27.10 ) 28 cement concrete with 2cm gauge approved hard stone ballast, coarse sandand cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. ( csi no. 5.06 ) 29 supply and installation of india mark ii hand pump including 150 mm dia. 37 m deep boring upto second strata .rate as per se, 7th mandal, up jal nigam, gorakhpur letter no 1045 dt 16.02.15 ( csi no.28.09 ) 30 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.14 ) 31 supply and fixing cp nahani trap india make of heavy approved quality complete with ci grating, includingsupply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 27.21a ) 32 providing and fixing 25 mm dia b class jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi no. 26.01c ) 33 providing and fixing full way 25mm dia g.m. gate valvewith wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.04c ) 34 providing and fixing cp brass stop cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.16 ) b 35 providing and fixing cp brass piller cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.16 ) j 36 wiring point for light with 1.5sq mm frlsh pvc insulated multisrand single core copper conductor cable in heavy gauge pvc casing caping on surface complete with 14 swg copper earth contunuity wire, gp box, modular type switch & ceiling rose / batten holder on 3mm thick phenolic laminated backlite sheet etc completein all respects, as directed including matching colour wash p.s.i. no. 121 ( c ) 188 ( a ) +187 ( a ) 37 same as above item but wiring for fan as psi 133 c 38 wiring point forplug same as above item p.s.i. no.124 ( c ) 188 ( c ) +187 ( c ) 39 supply and fixing of batten holder / angle holder complete ( p.s.i. no. 405 ) 40 supply and fixing of led tube light batten fitting of approved make suitable for 1x22 watt led tubelight on surface complete in all respect ( p.s.i. no. 1413 ( a ) cat a ) 41 supplying and fixing 32a 240v ic cutout of approved make ( crompton, anchor or equivalent ) on meter board or polished teak ply board complete in all respect ( p.s.i. 1112 ) 42 s / f ofpower plug with 15 amp. / 250 volt flush type switch and 5 pin 15 amp / 250 volt flush type modular socketwith 4mm copper conductor on concealed m.s. box with phenolic laminated bakelite sheet cover with supply of all material, labour t&p etc. required for proper completion of work. ( 1139a+211c ) 43 s / wiring sub main with 2 no. 4sq mm frlsh pvc insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage pvc condut concealed with wall including one number 2.5 sqmm fr pvc insulated multistand copper cable as earth contuity wire drawn in conduit. ( psi 216 b ) 44 supply and fixing of factory wired integral led flood light luminairies with die cast aluminium housing built with driver set suitable for 40 to 50 watt . conforming to ip 65 protection complete in all respect. psi no 1451 cat aaa 45 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. ( csi no. 28.39 ) 46 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.5 to 2.0 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. ( csi no. 5.05 ) 47 dismantling doors or window leaves including stacking ofmaterials as directed by the engineer i / c within a dist. 60 m. ( csi no. 15.09 ) 48 dismantaling doors and windowschowkhatsincluding stacking of materials as directed by engg in charge within a distance of 60 meters. ( csi no. 15.10 ) 49 first class brick work in 1:4 cement and coarse sandmortar in super structure in steps, parapet andfacia including nacessary cutting moulding of bricks andincluding supply of all materials labour & t & p required forproper completion of the work including placing & fixing ofreinforcement in position with 24 b.w.g. binding wire withcentering shuttering complete but excluding cost of reinforcementand its bending which shall be measured separately. ( csi no. 6.17 ) 50 mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work ( csi no. 9.01 ) 51 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand & 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should conform to i.s.1038 1975. ( aluminum beading with rubber packing included ) . ( csi no. 9.17 ) 52 repair to plaster in 1:6 patches including removal of old plaster racking out joints to 1 cm. ( 3 / 8 ) depth, watering the area and then replastering the sameincluding supply of all materials, labour and t&p etc. required for proper completion of the work . ( csi no. 11.09+20.02 ) 53 renewing panes of glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work. ( a ) glass of 4 mm thick. ( csi no. 20.04 ) 806b 54 providing and fixing 25mm depth glass strips of 3.15 mm thickness in jointsof floor and skirting at the time of laying floors, flush withfloor level including supplyof all materials, labour and t&p etc. completion required for proper completion of the work. ( csi no. 12.13 ) 55 supply and replacing of l drops 16 mm dia x 300 long oxidized iron fittings including cost of nuts, bolts etc.complete. ( csi no. 20.17a ) 56 supply and replacing of tower bolts 10 mm dia x 250 mm longoxidized iron fittings including cost of nuts, bolts etc.complete. ( csi no. 20.17b ) 57 s / f galvanized mosquitos proof heavy quality iron wire gauge ( 14x24 ) over window frames and including supply of c.p. teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials, labour andt&p etc. required for proper complete. ( csi no. 8.43 ) 58 painting or varnishing on previously paintedold wood or iron work including its sand papering, rubbing andcleaning as required including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103 1950. ( csi no. 13.02+13.03 ) 59 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. ( csi no. 8.57 ) 60 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. ( csi no. 13.20 ) 61 painting two coat with apexof asian paint or equivalent make including 3 coats of above and including one priming coat on already well preparied new wall surface to give an even shed including cost of all materials, labour and t & p etc. complete csi no. 13.22+13.23 62 two coatwith acrylic emulsion paint of berger / asian / ici or equivalent paint ( paint and water in the ratio 1:1 by volume ) over previousaly painted surface of cement concrete, cement plaster and bricks including supply of all materials, labour and t&p etc. required for proper completion of the work. ( c.s.i.no.13.25+13.26 ) ...

Department Of Culture - Uttar Pradesh

37803121 impalement refers to the process of selecting or appointing a firm / agency for culture programs 1 tent rates for arrangements and facilities of state events 2 velvet sofa set standard size (3 piece 1 seater) with gst 3 velvet sofa set standard size (1 piece 2 seater) with gst 4 molded chair (with handles) with gst 5 molded chair (without handle) with gst 6 chandni (12*5.5 feet) with gst 7 table cloth (6*2.75 feet) with gst 8 glass table (per piece) with gst 9 board (3*5 feet) with gst 10 foam bed (6*3 feet) with gst 11 carpet (per square feet) with gst 12 water table (per square feet) with gst 13 stage for artist (per piece) with gst 14 red carpet (per piece) with gst 15 frills for tables (per piece) with gst 16 markeen cloth (per piece) with gst 17 central table(per piece) with gst 18 central table cover with border (per piece) with gst 19 velvet chair without arm rest (cover ribbon) (per piece) with gst 20 stall of double table 3*9 feet(pipe) (per piece) with gst 21 sofa cover standard size (per piece) with gst 22 flowerpot (per piece) with gst 23 bedsheet 4*20 feet (per piece) with gst 24 president chair on stage (per piece) with gst 25 executive chair (per piece) with gst 26 big round table (per piece) with gst 27 big round table cover simple (per piece) with gst 28 canopy (per piece) with gst 29 waterproof pandaal (per square feet) with gst 30 open pandaal (per square feet) with gst 31 unitex 6*36 ft (per square feet) with gst 32 jute matting 6*36 ft (per square feet) with gst 33 heavy iron scaffolding dias (per square feet) with gst 34 german hangar pandaal (per square feet) with gst 35 service cottage (per square feet) with gst 36 barricading (per square feet) with gst 37 wooden flooring (per square feet) with gst 38 stage set up (per square feet) with gst 39 truss t stand (per pillar) with gst 40 stage truss rate (30 feet) with gst 41 stage truss rate (50 feet) with gst 42 stage truss rate (80 feet) with gst 43 octanorm wall (per running feet) with gst 44 light rates for arrangements and facilities of state events 45 series bulb ribbon – 6 volts (per hundred ) with gst 46 submain line (per meter) with gst 47 tricolor board of bulbs 6*4 ft, 4*4 ft (per piece) with gst 48 series bulb ribbon 12 v (per piece) with gst 49 panel distribution board 110 amp (per piece) with gst 50 color decoration lamp 40/220 v (per piece)with gst 51 pa system with speaker and mic set (per set) with gst 52 horn amplifier with light (per piece) with gst 53 halogen 500 watt (per piece) with gst 54 halogen 1000 watt (per piece) with gst 55 fancy bracket 100 watt (per piece) with gst 56 tube light 400 watt (per piece) with gst 57 ceiling fan (per piece) with gst 58 pedestal fan (per piece) with gst 59 line charge (per meter) with gst 60 digital board (per piece) with gst 61 jhoomar / chandelier (per piece) with gst 62 generator 25 kv (per piece) with gst 63 generator 63 kv (per piece) with gst 64 generator 125 kv (per piece) with gst 65 simple cooler (per piece) with gst 66 jumbo cooler (per piece) with gst 67 conference microphone (per piece) with gst 68 cordless mic (per piece) with gst 69 collar mic (per piece) with gst 70 foot mic (per piece) with gst 71 mic set with battery (per set) with gst 72 mic stand small (per piece) with gst 73 mic stand large(per piece) with gst 74 mic cable (per meter) with gst 75 speaker cable (per meter) with gst 76 plug point 5 amp (per piece) with gst 77 plug point 15 amp (per piece) with gst 78 jhaalar 6 v (per 100) with gst 79 ribbon light 6 v (per 100) with gst 80 ac (per ton) with gst 81 heat converter blower (per piece) with gst 82 led bulb 6 watt (per piece) with gst 83 led bulb 9 watt (per piece) with gst 84 led bulb 15 watt (per piece) with gst 85 warm white led 1000 watt (per piece) with gst 86 uv light (per piece) with gst 87 compressor speaker (per piece) with gst 88 podium (per piece) with gst 89 equalizer (per piece) with gst 90 column speaker (per piece) with gst 91 microphone (per piece) with gst 92 amplifier (per piece) with gst 93 reflector (per piece) with gst 94 metal highlight (per piece) with gst 95 pedestal fan high flow (per piece) with gst 96 main line 3 phase (per piece) with gst 97 ac copper pipeline (per piece) with gst 98 led steep light (per piece) with gst 99 led basket light (per piece) with gst 100 led spotlight 1000 watt (per piece) with gst 101 led multicolor jhaalar light (per meter) 102 led par beam light 1000 watt (per piece) with gst 103 led par cans 1000 watt (per piece) with gst 104 moving heads sharpy (per piece) with gst 105 profile spotlight 1000 watt (per piece) with gst 106 color wash (per piece) with gst 107 jbl high voltage buffer speaker (per piece) with gst 108 jbl vrx 900 series (per piece) with gst 109 jbl vertec 4889 (per piece) with gst 110 bose professional series (pro) (per piece) with gst 111 rcf hdl 20 (per piece) with gst 112 stage monitor (sound) jbl (per piece) with gst with gst 113 digital sound mixer 32 in 48 out channels (per piece) with gst 114 avo light board pearl light mixer (per piece) with gst 115 grand ma2 light mixer with 2 screen (per piece) with gst 116 fog machine (per piece) with gst 117 soko wiring connector (per piece) with gst 118 pedestal heater (per piece) with gst 119 mist fan (per piece) with gst 120 led wall p3 (per sq feet ) with gst 121 led wall p6 (per sq feet) with gst 122 curved led p3 (per sq feet) with gst 123 plasma monitor (per piece) with gst 124 stage promptor (per piece) with gst 125 light rates for arrangements and facilities of state events 126 3 layer flower strip (per feet) with gst 127 4 layer flower strip (per feet) with gst 128 5 layer flower strip (per feet) with gst 129 platform/pedestal decoration of a statue (total) with gst 130 marigold flower strip / garland – yellow color (per feet) with gst 131 marigold flower strip/ garland – other colors (per feet) with gst 132 rose strip / garland (per feet) with gst 133 mixed flower strip / garland (per feet) with gst 134 rose petals (per kg) with gst 135 bunch decoration of the venue (per bunch) with gst 136 high quality bouquet – lily and other seasonal flowers (per bouquet) with gst 137 decoration of small flower pot(metal) (per pot) with gst 138 decoration of big flower pot(metal) (per pot) with gst ...

Indian Institute Of Technology - Uttar Pradesh

37744563 annual repair and maintenance contract for zones 5 and 6 of iit kanpur as per the tender document 1.01 manpower 1.02 facility manager grade 1 1.03 facility manager grade 2 1.04 supervisor (skilled) 1.05 multi skilled worker(skilled) 1.06 plumber (skilled) 1.07 carpenter (skilled) 1.08 welder (skilled) 1.09 electrican (skilled) 1.1 semi skilled worker 1.11 helper (unskilled) 1.12 consumable material (civil) 1.13 al curtain rod(pipe) dia 20 mm length 3600 mm 1.14 al bracket l type 20 mm dia 1.15 al bracket t type 20 mm 1.16 al tower bolt 200 × 10 mm 1.17 al tower bolt 150 × 10 mm 1.18 al tower bolt 100 × 10 mm 1.19 al door handle 100 x10 mm 1.2 al door handle 125 mm 1.21 al rubber door stopper (double) 1.22 brass door stopper (single leg) 1.23 aluminium door floor spring 1.24 aluminium door hasp and staple 125mm 1.25 al hasp & staple 115 mm 1.26 aluminium window handle 1.27 al window ss friction stay 250 mm 1.28 al window ss friction stay 350 mm 1.29 al door seal with rubber or brush 3 long 1.3 al sliding door bolt 300 × 16 mm 1.31 al sliding door bolt 250 × 16 mm 1.32 door seal 4 feet 1.33 gm/brass gate valve 20 mm 1.34 brass gate valve 15 mm 1.35 gm/brass gate valve 25 mm 1.36 brass gate valve 32 mm 1.37 gm/brass gate valve 40 mm 1.38 brass bib cock 15 mm 1.39 brass ball cock 20 mm 1.4 brass ball cock 25 mm 1.41 brass ball cock 32 mm 1.42 brass ball cock 15 mm 1.43 brass ball valve 20 mm 1.44 brass rod for ball cock 15 mm 1.45 brass phase for stop cock(pillar cock) 15 mm 1.46 brass stop cock 15 mm 1.47 brass sliding door bolt 250 x 16 mm 1.48 brass tower blot 250 x 10 mm 1.49 brass spendle for consealed stop cock 15 mm 1.5 cp bib cock (short body) 15 mm 1.51 cp bib cock (long body) 15 mm 1.52 cp pillar cock 15 mm 1.53 cp angle valve 15 mm 1.54 cp revolving shower 15 × 75 mm 1.55 cp grating 125 mm 1.56 cp grating with hole cutting 125 mm 1.57 cp hand shower with connection(health faucet) 1.58 cp jet connection with jet 1.59 cp extension piece 15 × 50 mm 1.6 cp extention piece 15 × 75 mm 1.61 cp flange 15 mm 1.62 flush valve for w.c 40 mm (consealed type) jaguar make 1093 1.63 cp toilet paper holder 1.64 c.p/brass towel rail (600 x 20) mm 1.65 commercial ply 4 mm (2.44 ×1.22)mt 1.66 commercial ply 6 mm (2.44 ×1.22)mt 1.67 commercial ply 12 mm (2.44 ×1.22)mt 1.68 commercial ply board 19 mm (2.44 × 1.22)mt 1.69 cp nozal cock 15 mm 1.7 cp swan neck piller cock 15 mm 1.71 cp waste 32 mm fullthread 1.72 cp bottel trap 32 mm 1.73 cp copper connection with nutt and washer(15 x 450) mm 1.74 cp copper connection without nut & washer 15 × 450 mm 1.75 cp copper connection with nutt and washer(15 x 600) mm 1.76 cp hand shower chain / 1.5 mtr lead 1.77 cp soap dish 100 mm 1.78 cp two way angle valve 15 mm 1.79 c.p brass push cock for urinal 15 mm 1.8 ci bib cock 15 mm 1.81 cp coat pin hanger (two pin) 1.82 cp adapter 20 mm 1.83 bond tite [360 gram] 1.84 door closer 1.85 drill bit (4.0 mm) 1.86 drill bit (10 mm ) 1.87 drill bit (3 mm ) 1.88 drill bit 6.5 mm for hammer drill 1.89 drill bit 6.5 mm 1.9 drill bit 25 mm for hammer drill 1.91 drill bit (16 mm ) 1.92 drill bit (12 mm ) 1.93 electric welding rod 1.94 fevicol 5 kg (pack) 1.95 gi pipe 32 mm 1.96 gi pipe 25 mm 1.97 gi pipe 20 mm 1.98 gi pipe 15 mm 1.99 gi pipe 40 mm 2 gi pipe 50 mm 2.01 fastner with washer ( 10x100) mm 2.02 gi socket 32 mm 2.03 gi socket 25 mm 2.04 gi socket 20 mm 2.05 gi socket 15 mm 2.06 gi socket 40 mm 2.07 gi reduser socket 25 × 15 mm 2.08 gi reducer socket 20 × 15 mm 2.09 gi reduser socket 25 × 20 mm 2.1 gi reduser socket 32 × 25 mm 2.11 gi reducer socket 40 × 25 mm 2.12 gi elbow 32 mm 2.13 gi elbow 25 mm 2.14 gi elbow 20 mm 2.15 gi elbow 15 mm 2.16 gi elbow 40 mm 2.17 gi elbow 50 mm 2.18 gi reducer elbow 25 × 20 mm 2.19 gi reduser elbow 20 × 15 mm 2.2 gi reduser elbow 40 × 32 mm 2.21 gi reduser elbow 40 × 25 mm 2.22 gi reduser elbow 32 × 20 mm 2.23 gi tee 32 mm 2.24 gi tee 25 mm 2.25 gi tee 20 mm 2.26 gi tee 15 mm 2.27 gi tee 40 mm 2.28 gi reducer tee 20 × 15 mm 2.29 gi union 32 mm 2.3 gi union 25 mm 2.31 gi union 20 mm 2.32 gi union 15 mm 2.33 gi union 50 mm 2.34 gi union 40 mm 2.35 gi nipple 20 × 150 mm 2.36 gi nipple 20 × 100 mm 2.37 gi nipple 20 × 75 mm 2.38 gi nipple 20 × 50 mm 2.39 gi nipple 15 × 150 mm 2.4 gi nipple 15 × 100 mm 2.41 gi nipple 15 × 75 mm 2.42 gi nipple 32 × 150 mm 2.43 gi nipple 32 × 100 mm 2.44 gi nipple 32 × 75 mm 2.45 gi nipple 25 × 150 mm 2.46 gi nipple 25 × 100 mm 2.47 gi nipple 25 × 75 mm 2.48 gi nipple 25 × 50 mm 2.49 gi nipple 15 × 50 mm 2.5 gi nipple 50 × 100 mm 2.51 gi nipple 50 × 150 mm 2.52 gi nipple 40 × 100 mm 2.53 gi nipple 40 × 150 mm 2.54 gi hexa nipple 20 mm 2.55 gi hexa nipple 15 mm 2.56 gi long 25 × 150 mm 2.57 gi long 20 × 150 mm 2.58 gi long 15 × 150 mm 2.59 gi long 32 × 150 mm 2.6 gi long 50 × 150 mm 2.61 gi long 40 × 150 mm 2.62 glass plain 4 mm (6 × 4) 2.63 glass plain 5 mm (6 × 4) 2.64 glass looking mirror 600 × 450 mm 2.65 glass frosted 4 mm (6 × 4) 2.66 glass mirror sheet 6 mm (6 × 4) 2.67 glass putty 2.68 gi plug 25 mm 2.69 gi plug 20 mm 2.7 gi plug 15 mm 2.71 gi plug 40 mm 2.72 gi plug 50 mm 2.73 gi plug 32 mm 2.74 glass rubber beeding ( black ) 2.75 iron hexa blade (12 × 1) 2.76 iron sliding door bolt 250 × 16 mm 2.77 iron sliding door bolt 300 × 16 mm 2.78 nut bolt for sliding door (6 × 50) mm (100 in pkt) 2.79 iron but hing 125 mm 2.8 iron but hing 100 mm 2.81 iron but hing 75 mm 2.82 iron tower bolt 200 × 10 mm 2.83 iron tower bolt 150 × 10 mm 2.84 iron tower bolt 100 × 10 mm 2.85 iron door handle 125 mm 2.86 iron door handle 100 mm 2.87 iron eye hook 100 mm 2.88 iron magic eye 2.89 iron kunda for sliding door bolt 2.9 iron window handle l/r 2.91 iron door spring (helical) 2.92 iron cutter blade ( 100 mm dia) 2.93 iron nut and bolt for sliding door bolt 2.94 iron haps & staple 115 mm 2.95 pvc bib cock 15 mm 2.96 pvc waste pipe 32 mm 2.97 pvc waste pipe 40 mm 2.98 pvc connection 15 × 450 mm 2.99 stainless steel wire mesh (4 width) 3 wc china sink 600 × 450 × 300 mm 3.01 oil bound distemper (5 kg pack) 3.02 jk white cement based wall putty 5 kg pack 3.03 white cement (1 kg pack) 3.04 c.p spreader 3.05 wc orissa pan seat 580 × 440 mm 3.06 wash basin 550 × 400 mm 3.07 wc wash basin (oval) over the top 550 x 480 3.08 wg ewc seat s type (commode) 3.09 ewc pvc seat cover 3.1 pvc flushing cistern 10 ltr 3.11 pvc cistern fitting 10 ltr 3.12 enamel paint (any colour) 3.13 pvc bend (long) 3.14 pvc urinal flexible pipe 32 × 150 mm 3.15 pvc ball for ball cock 15/20 mm 3.16 pvc door silencer 50 mm 3.17 lime for white wash 1kg 3.18 marble cutter blade ( 100 mm dia) 3.19 marble moulding blade ( 100 mm dia) 3.2 iron cutter blade 100 mm 3.21 wood cutter blade ( 100 mm dia) 3.22 tarpin oil 3.23 pvc syphan washer 3.24 wc china sink 450 × 300 × 150 mm 3.25 parliamentory hinges 3.26 piano hinger 3.27 pvc. seat cover nob (e.ec) 3.28 sand paper 3.29 silicon/silicon tube 3.3 silicon gun 3.31 steel hinges (75 mm ) 3.32 sulation for pvc pipe (100 gram) 3.33 hand soap dispenser 3.34 s.s hinge 100 mm 3.35 pvc gulli 3.36 gi check nut 15 mm 3.37 gi check nut 20 mm 3.38 cement concrete (cast in situ) 3.39 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.4 1:2:4 (1 cement : 2 coarse sand (zone iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 3.41 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.42 1:5:10 (1 cement : 5 coarse sand (zone iii) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources) 3.43 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.44 1:5:10 (1 cement : 5 coarse sand (zone iii) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources) with available bricks 3.45 masonry work 3.46 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.47 cement mortar 1:6 (1 cement : 6 coarse sand) 3.48 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.49 cement mortar 1:6 (1 cement : 6 coarse sand) with available bricks 3.5 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.51 cement mortar 1:4 (1 cement :4 coarse sand) 3.52 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.53 cement mortar 1:4 (1 cement :4 coarse sand) with available bricks 3.54 cladding work 3.55 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 3.56 wood and p. v. c. work 3.57 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 3.58 sal wood 3.59 providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. 3.6 second class teak wood 3.61 35 mm thick 3.62 providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 3.63 35 mm thick shutters 3.64 with isi marked m.s. pressed butt hinges bright finished of required size 3.65 second class teak wood 3.66 flooring 3.67 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 3.68 finishing 3.69 neat cement punning. 3.7 pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 3.71 flush / ruled/ struck or weathered pointing 3.72 repairs to building 3.73 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineerin charge. 3.74 with cement mortar 1:4 (1cement: 4 coarse sand) 3.75 new technologies and materials 3.76 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer in charge complete in all respect. 3.77 sbr polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer 3.78 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer in charge. 3.79 25 mm average thickness in 2 layers. 3.8 providing, mixing and applying sbr polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. 3.81 50mm thick in grade m 25 with cement content not less than 330 kg per cum 3.82 supplying of ready mixed micro concrete (in pack 25 kg) of make: rederoc rg (non shrink, cementitious micro concrete). 3.83 fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with g.i. staples, turn buckles etc. complete. (cost of posts, struts, earth work and concrete work to be paid for separately). payment to be made per metre cost of total length of barbed wire used. 3.84 with g.i. barbed wire 3.85 supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comple 3.86 consumable material (electrical) 3.87 supplying of following piano type switch/ socket complete etc. as required. 3.88 5/6 amp one way switch 3.89 5/6 amp two way switch 3.9 3 pin 5/6 amp socket outlet 3.91 15/16 amp switch 3.92 6 pin 15/16 amp socket outlet 3.93 fan regulator socket type 3.94 telephone socket/ jack outlet 3.95 6a, bell push switch (call bell push) 3.96 supplying of following modular switch/ socket complete etc. as required. 3.97 5/6 amp switch (1 way, 1 module) 3.98 2 way 5/6 amp switch (2 way, 1 module) 3.99 3 pin 5/6 amp socket outlet (socket shuttered 6a, 2/3 pin, universal india 2 module) 4 15/16 amp switch (1 way, 1 module) 4.01 6 pin 15/16 amp socket outlet (socket shuttered 6/16a, 3 pin, india 2 module) 4.02 fan regulator socket type (fan step regulator 100 watts, 2 module) 4.03 telephone socket outlet (telephone socket rj11 with shutter, 1 module ) 4.04 bell push, 6a, 1 way, 1 module 4.05 blanking plate (1 module blank) 4.06 supply of modular base & cover plate complete as required. 4.07 white plate 2 module 4.08 white plate 3 module 4.09 white plate 4 module 4.1 white plate 6 module 4.11 white plate 8 module 4.12 12 module (white plate 2x6 module) 4.13 supplying of following capacity capacitor suitable for ceiling fan etc. 4.14 2.5mfd 4.15 supplying of 20 / 40 w, 220 v starter for fl. tube fitting complete as reqd. 4.16 supplying of 18w/28w electronics ballast , 240v fl. lamp complete as reqd. 4.17 supplying of brass batten/ angle holder complete etc. as required (6 a, brass batten/ angle holder ) 4.18 supplying of ceiling rose (6a, pilot 3 plate) 4.19 supply of pvc tape roll 4.2 supplying of 6 watt led slim recess cum surface led panel as complete as required. 4.21 supplying of 12 watt led slim recess cum surface led panel as complete as required. 4.22 supplying of following led / lamps in existing fitting as complete as required. 4.23 led bulbs 10watt 4.24 supply of led tube 20 watt 4.25 supply of 100 watt bulb 4.26 supplying of 5 amps to 32 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.27 single pole 6 amp (sp,6 amp, c curve) 4.28 single pole 10 amp (sp,10 amp, c curve) 4.29 single pole 16 amp (sp, 16 amp, c curve) 4.3 single pole 20 amp (sp, 20amp, c curve) 4.31 single pole 32 amp (sp, 32 amp, c curve) 4.32 double pole 32 amp (dp,32 amp, c curve) 4.33 four pole 32 amp (fp, 32 amp, c curve) 4.34 supplying of 40 to 63 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.35 single pole 40 amp (sp,40 amp, c curve) 4.36 single pole 63 amp (sp,63 amp, c curve) 4.37 supplying of 40 to 63 amps rating, 240/415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.38 double pole 40 amp (dp,40 amp, c curve) 4.39 double pole 63 amp b(dp,63 amp, c curve) 4.4 four pole 63 amp 4.41 supplying of following rating, double pole, (single phase and neutral), 240 v, residual current circuit breaker (rccb), having a sensitivity current 300 ma in the existing mcb db complete as required. 4.42 dp,40 amp, rccb 4.43 dp,63 amp, rccb 4.44 supplying of following rating 3 pin plug top complete as required. 4.45 supply of 5/6 amps, plug top isi marked 4.46 supply of 15/16 amps, plug top isi marked 4.47 industrial/metallic top (20 amp) 4.48 industrial socket (20 amp) 4.49 supplying of frls pvc insulated flexible copper conductor cable. 4.5 1x2.5sqmm 4.51 1x1.5sqmm 4.52 1x4sqmm 4.53 3x2.5sqmm (3 core round conductor) 4.54 3x4sqmm (3 core round conductor) 4.55 3x1.5sqmm (3 core round conductor) 4.56 supply of 400mm sweep ac 230/250 volts, 50 hz wall mounting revolving fan with brackets etc compete. 4.57 supply of ac ceiling fan of following sweep 220 volts without regulator i/c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm. 4.58 overhauling of celing fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (excluding manpower) 4.59 rewinding of ceiling fans of any size i/c dismantling of rotor cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (excluding manpower) 4.6 rewinding of exhaust fans of any size i/c dismantling cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (excluding manpower) 4.61 overhauling of exhaust fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (excluding manpower) 4.62 cleaning of ceiling fan/wall fan/exhaust fan with detergent at site (excluding manpower) 4.63 hand gloves rubber 4.64 duster 4.65 material required having life of 12 months 4.66 foldable multipurpose aluminium super ladder for home and industrial purpose (12 feet) 4.67 emergency rechargeable led torch light. 4.68 safety shoes ...

Indian Institute Of Technology - Uttar Pradesh

37744562 annual repair and maintenance contract for zone 7, 8, 9, 10 of iit kanpur as per the tender document. 1.01 manpower 1.02 facility manager grade 1 1.03 facility manager grade 2 1.04 supervisor ( skilled ) 1.05 multi skilled worker ( skilled ) 1.06 plumber ( skilled ) 1.07 carpenter ( skilled ) 1.08 mason ( skilled ) 1.09 welder ( skilled ) 1.1 electrician ( skilled ) 1.11 semi skilled worker 1.12 helper ( unskilled ) 1.13 consumable material ( civil ) 1.14 al curtain rod ( pipe ) dia 20 mm length 3600 mm 1.15 al bracket l type 20 mm dia 1.16 al bracket t type 20 mm 1.17 al tower bolt 200 × 10 mm 1.18 al tower bolt 150 × 10 mm 1.19 al tower bolt 100 × 10 mm 1.2 al door handle 100 x10 mm 1.21 al door handle 125 mm 1.22 al rubber door stopper ( double ) 1.23 brass door stopper ( single leg ) 1.24 aluminium door floor spring 1.25 aluminium door hasp and staple 125mm 1.26 al hasp & staple 115 mm 1.27 aluminium window handle ( l / r ) 1.28 al window ss friction stay 250 mm 1.29 al window ss friction stay 350 mm 1.3 al door seal with rubber or brush 3 long 1.31 al sliding door bolt 300 × 16 mm 1.32 al sliding door bolt 250 × 16 mm 1.33 al door seal with rubber or brush 4 long 1.34 gm / brass gate valve 20 mm 1.35 brass gate valve 15 mm 1.36 gm / brass gate valve 25 mm 1.37 brass gate valve 32 mm 1.38 gm / brass gate valve 40 mm 1.39 brass bib cock 15 mm 1.4 brass ball cock 20 mm 1.41 brass ball cock 25 mm 1.42 brass ball cock 32 mm 1.43 brass ball cock 15 mm 1.44 brass ball valve 20 mm 1.45 brass rod for ball cock 15 mm 1.46 brass phase for stop cock ( pillar cock ) 15 mm 1.47 brass mortice latch & lock 100 × 65 mm 1.48 brass stop cock 15 mm 1.49 brass sliding door bolt 250 x 16 mm 1.5 brass tower blot 250 x 10 mm 1.51 brass spendle for consealed stop cock 15 mm 1.52 cp bib cock ( short body ) 15 mm 1.53 cp bib cock ( long body ) 15 mm 1.54 cp pillar cock 15 mm 1.55 cp angle valve 15 mm 1.56 cp grating 125 mm 1.57 cp grating with hole cutting 125 mm 1.58 cp hand shower with connection ( health faucet ) 1.59 cp jet connection with jet 1.6 cp extension piece 15 × 50 mm 1.61 cp extention piece 15 × 75 mm 1.62 cp flange 15 mm 1.63 flush valve for w.c 40 mm ( consealed type ) jaguar make 1093 1.64 cp toilet paper holder 1.65 c.p / brass towel rail ( 600 x 20 ) mm 1.66 commercial ply 4 mm ( 2.44 ×1.22 ) mt 1.67 commercial ply 6 mm ( 2.44 ×1.22 ) mt 1.68 commercial ply 12 mm ( 2.44 ×1.22 ) mt 1.69 commercial ply board 19 mm ( 2.44 × 1.22 ) mt 1.7 cp nozal cock 15 mm 1.71 cp swan neck piller cock 15 mm 1.72 cp swan neck three way 15 mm 1.73 cp waste full thread 50 mm 1.74 cp waste 32 mm fullthread 1.75 cp bottel trap 32 mm 1.76 cp hand shower chain / 1.5 mtr lead 1.77 cp soap dish 100 mm 1.78 cp two way angle valve 15 mm 1.79 c.p brass push cock for urinal 15 mm 1.8 ci bib cock 15 mm 1.81 cp coat pin hanger ( two pin ) 1.82 cp adapter 20 mm 1.83 bond tite [ 360 gram ] 1.84 door closer 1.85 drill bit ( 4.0 mm ) 1.86 drill bit ( 10 mm ) 1.87 drill bit ( 3 mm ) 1.88 drill bit 6.5 mm for hammer drill 1.89 drill bit 6.5 mm 1.9 drill bit 25 mm for hammer drill 1.91 drill bit ( 16 mm ) 1.92 drill bit ( 12 mm ) 1.93 electric welding rod ( 90 electrodes in pkt ) 1.94 fevicol 5 kg ( pack ) 1.95 gi pipe 32 mm 1.96 gi pipe 25 mm 1.97 gi pipe 20 mm 1.98 gi pipe 15 mm 1.99 gi pipe 40 mm 2 gi pipe 50 mm 2.01 fastner with washer ( 10x100 ) mm 2.02 gi socket 32 mm 2.03 gi socket 25 mm 2.04 gi socket 20 mm 2.05 gi socket 15 mm 2.06 gi socket 40 mm 2.07 gi reduser socket 25 × 15 mm 2.08 gi reducer socket 20 × 15 mm 2.09 gi reduser socket 25 × 20 mm 2.1 gi reduser socket 32 × 25 mm 2.11 gi reducer socket 40 × 25 mm 2.12 gi elbow 32 mm 2.13 gi elbow 25 mm 2.14 gi elbow 20 mm 2.15 gi elbow 15 mm 2.16 gi elbow 40 mm 2.17 gi elbow 50 mm 2.18 gi reducer elbow 25 × 20 mm 2.19 gi reduser elbow 20 × 15 mm 2.2 gi reduser elbow 40 × 32 mm 2.21 gi reduser elbow 40 × 25 mm 2.22 gi reduser elbow 32 × 20 mm 2.23 gi tee 32 mm 2.24 gi tee 25 mm 2.25 gi tee 20 mm 2.26 gi tee 15 mm 2.27 gi tee 40 mm 2.28 gi reducer tee 20 × 15 mm 2.29 gi union 32 mm 2.3 gi union 25 mm 2.31 gi union 20 mm 2.32 gi union 15 mm 2.33 gi union 50 mm 2.34 gi union 40 mm 2.35 gi nipple 20 × 150 mm 2.36 gi nipple 20 × 100 mm 2.37 gi nipple 20 × 75 mm 2.38 gi nipple 20 × 50 mm 2.39 gi nipple 15 × 150 mm 2.4 gi nipple 15 × 100 mm 2.41 gi nipple 15 × 75 mm 2.42 gi nipple 32 × 150 mm 2.43 gi nipple 32 × 100 mm 2.44 gi nipple 32 × 75 mm 2.45 gi nipple 25 × 150 mm 2.46 gi nipple 25 × 100 mm 2.47 gi nipple 25 × 75 mm 2.48 gi nipple 25 × 50 mm 2.49 gi nipple 15 × 50 mm 2.5 gi nipple 50 × 100 mm 2.51 gi nipple 50 × 150 mm 2.52 gi nipple 40 × 100 mm 2.53 gi nipple 40 × 150 mm 2.54 gi hexa nipple 20 mm 2.55 gi hexa nipple 15 mm 2.56 gi long 25 × 150 mm 2.57 gi long 20 × 150 mm 2.58 gi long 15 × 150 mm 2.59 gi long 32 × 150 mm 2.6 gi long 50 × 150 mm 2.61 gi long 40 × 150 mm 2.62 glass plain 4 mm ( 6 × 4 ) 2.63 glass plain 5 mm ( 6 × 4 ) 2.64 glass looking mirror 600 × 450 mm 2.65 glass frosted 4 mm ( 6 × 4 ) 2.66 glass putty 2.67 gi plug 25 mm 2.68 gi plug 20 mm 2.69 gi plug 15 mm 2.7 gi plug 40 mm 2.71 gi plug 50 mm 2.72 gi plug 32 mm 2.73 glass rubber beeding ( black ) 2.74 iron hexa blade ( 12 × 1 ) 2.75 iron sliding door bolt 250 × 16 mm 2.76 iron sliding door bolt 300 × 16 mm 2.77 nut bolt for sliding door ( 6 × 50 ) mm ( 100 in pkt ) 2.78 iron but hing 125 mm 2.79 iron but hing 100 mm 2.8 iron but hing 75 mm 2.81 iron tower bolt 200 × 10 mm 2.82 iron tower bolt 150 × 10 mm 2.83 iron tower bolt 100 × 10 mm 2.84 iron door handle 125 mm 2.85 iron door handle 100 mm 2.86 iron eye hook 100 mm 2.87 iron magic eye 2.88 iron kunda for sliding door bolt 2.89 iron window handle l / r 2.9 iron door spring ( helical ) 2.91 iron cutter blade ( 100 mm dia ) 2.92 iron nut and bolt for sliding door bolt 2.93 iron haps & staple 115 mm 2.94 pvc bib cock 15 mm 2.95 pvc waste pipe 50 mm 2.96 pvc waste pipe 32 mm 2.97 pvc waste pipe 40 mm 2.98 pvc connection 15 × 450 mm 2.99 stainless steel wire mesh ( 4 width ) 3 wc china sink 600 × 450 × 300 mm 3.01 oil bound distemper ( 5 kg pack ) 3.02 jk white cement based wall putty 5 kg pack 3.03 white cement ( 1 kg pack ) 3.04 c.p brass spreader 3.05 wc orissa pan seat 580 × 440 mm 3.06 wash basin 550 × 400 mm 3.07 wc wash basin ( oval ) over the top 550 x 480 3.08 wg ewc seat s type ( commode ) 3.09 ewc pvc seat cover 3.1 pvc flushing cistern 10 ltr 3.11 pvc cistern fitting 10 ltr 3.12 enamel paint ( any colour ) 3.13 pvc bend ( long ) 3.14 pvc urinal flexible pipe 32 × 150 mm 3.15 pvc ball for ball cock 15 / 20 mm 3.16 pvc door silencer 50 mm 3.17 lime for white wash 1kg 3.18 marble cutter blade ( 100 mm dia ) 3.19 marble moulding blade ( 100 mm dia ) 3.2 iron cutter blade 100 mm 3.21 wood cutter blade ( 100 mm dia ) 3.22 tarpin oil 3.23 pvc syphan washer 3.24 wc china sink 450 × 300 × 150 mm 3.25 parliamentory hinges 3.26 piano hinges 3.27 pvc. seat cover nob ( e.ec ) 3.28 sand paper 3.29 silicon / silicon tube 3.3 silicon gun 3.31 steel hinges ( 75 mm ) 3.32 sulation for pvc pipe ( 100 gram ) 3.33 hand soap dispenser 3.34 s.s hinge 100 mm ( 4 in pkt ) 3.35 pvc gulli ( 100 in pkt ) 3.36 gi check nut 15 mm 3.37 gi check nut 20 mm 3.38 cement concrete ( cast in situ ) 3.39 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.4 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources ) 3.41 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.42 1:5:10 ( 1 cement : 5 coarse sand ( zone iii ) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources ) 3.43 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work at all level : 3.44 1:5:10 ( 1 cement : 5 coarse sand ( zone iii ) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources ) with available bricks 3.45 masonry work 3.46 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.47 cement mortar 1:6 ( 1 cement : 6 coarse sand ) 3.48 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.49 cement mortar 1:6 ( 1 cement : 6 coarse sand ) with available bricks 3.5 half brick masonry with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.51 cement mortar 1:4 ( 1 cement :4 coarse sand ) 3.52 half brick masonry with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.53 cement mortar 1:4 ( 1 cement :4 coarse sand ) with available bricks 3.54 cladding work 3.55 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 3.56 wood and p. v. c. work 3.57 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately ) . 3.58 sal wood 3.59 providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. 3.6 second class teak wood 3.61 35 mm thick 3.62 providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 3.63 35 mm thick shutters 3.64 with isi marked m.s. pressed butt hinges bright finished of required size 3.65 second class teak wood 3.66 flooring 3.67 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. 3.68 finishing 3.69 neat cement punning. 3.7 pointing on brick work or brick flooring with cement mortar 1:3 ( 1 cement : 3 fine sand ) : 3.71 flush / ruled / struck or weathered pointing 3.72 repairs to building 3.73 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineerin charge. 3.74 with cement mortar 1:4 ( 1cement: 4 coarse sand ) 3.75 new technologies and materials 3.76 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer in charge complete in all respect. 3.77 sbr polymer ( @10% of cement weight ) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer 3.78 providing, mixing and applying sbr polymer ( of approved make ) modified cement mortar in proportion of 1:4 ( 1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used ) as per specifications and directions of engineer in charge. 3.79 25 mm average thickness in 2 layers. 3.8 providing, mixing and applying sbr polymer ( of approved make @ minimum 2% by wt. of cement used ) modified plain / reinforced cement concrete for structural members having minimum characteristic compressive strength [ with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria ] with specified average thickness. 3.81 50mm thick in grade m 25 with cement content not less than 330 kg per cum 3.82 supplying of ready mixed micro concrete ( in pack 25 kg ) of make: rederoc rg ( non shrink, cementitious micro concrete ) . 3.83 fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m ( minimum ) , between the two posts fitted and fixed with g.i. staples, turn buckles etc. complete. ( cost of posts, struts, earth work and concrete work to be paid for separately ) . payment to be made per metre cost of total length of barbed wire used. 3.84 with g.i. barbed wire 3.85 supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comple 3.86 consumable material ( electrical ) 3.87 supplying of following piano type switch / socket complete etc. as required. 3.88 5 / 6 amp one way switch 3.89 5 / 6 amp two way switch 3.9 3 pin 5 / 6 amp socket outlet 3.91 15 / 16 amp switch 3.92 6 pin 15 / 16 amp socket outlet 3.93 fan regulator socket type 3.94 telephone socket / jack outlet 3.95 6a, bell push switch ( call bell push ) 3.96 supplying of following modular switch / socket complete etc. as required. 3.97 5 / 6 amp switch ( 1 way, 1 module ) 3.98 2 way 5 / 6 amp switch ( 2 way, 1 module ) 3.99 3 pin 5 / 6 amp socket outlet ( socket shuttered 6a, 2 / 3 pin, universal india 2 module ) 4 15 / 16 amp switch ( 1 way, 1 module ) 4.01 6 pin 15 / 16 amp socket outlet ( socket shuttered 6 / 16a, 3 pin, india 2 module ) 4.02 fan regulator socket type ( fan step regulator 100 watts, 2 module ) 4.03 telephone socket outlet ( telephone socket rj11 with shutter, 1 module ) 4.04 bell push, 6a, 1 way, 1 module 4.05 blanking plate ( 1 module blank ) 4.06 supply of modular base & cover plate complete as required. 4.07 white plate 2 module 4.08 white plate 3 module 4.09 white plate 4 module 4.1 white plate 6 module 4.11 white plate 8 module 4.12 12 module ( white plate 2x6 module ) 4.13 supplying of following capacity capacitor suitable for ceiling fan etc. 4.14 2.5mfd 4.15 supplying of 20 / 40 w, 220 v starter for fl. tube fitting complete as reqd. 4.16 supplying of 18w / 28w electronics ballast , 240v fl. lamp complete as reqd. 4.17 supplying of brass batten / angle holder complete etc. as required ( 6 a, brass batten / angle holder ) 4.18 supplying of ceiling rose ( 6a, pilot 3 plate ) 4.19 supply of pvc tape roll 4.2 supplying of 6 watt led slim recess cum surface led panel as complete as required. 4.21 supplying of 12 watt led slim recess cum surface led panel as complete as required. 4.22 supplying of following led / lamps in existing fitting as complete as required. 4.23 led bulbs 10watt 4.24 supply of led tube 20 watt 4.25 supply of 100 watt bulb 4.26 supplying of 5 amps to 32 amps rating, 240 / 415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.27 single pole 6 amp ( sp, 6 amp, c curve ) 4.28 single pole 10 amp ( sp, 10 amp, c curve ) 4.29 single pole 16 amp ( sp, 16 amp, c curve ) 4.3 single pole 20 amp ( sp, 20amp, c curve ) 4.31 single pole 32 amp ( sp, 32 amp, c curve ) 4.32 double pole 32 amp ( dp, 32 amp, c curve ) 4.33 four pole 32 amp ( fp, 32 amp, c curve ) 4.34 supplying of 40 to 63 amps rating, 240 / 415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.35 single pole 40 amp ( sp, 40 amp, c curve ) 4.36 single pole 63 amp ( sp, 63 amp, c curve ) 4.37 supplying of 40 to 63 amps rating, 240 / 415 volts, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete as required. 4.38 double pole 40 amp ( dp, 40 amp, c curve ) 4.39 double pole 63 amp b ( dp, 63 amp, c curve ) 4.4 four pole 63 amp 4.41 supplying of following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 300 ma in the existing mcb db complete as required. 4.42 dp, 40 amp, rccb 4.43 dp, 63 amp, rccb 4.44 supplying of following rating 3 pin plug top complete as required. 4.45 supply of 5 / 6 amps, plug top isi marked 4.46 supply of 15 / 16 amps, plug top isi marked 4.47 industrial / metallic top ( 20 amp ) 4.48 industrial socket ( 20 amp ) 4.49 supplying of frls pvc insulated flexible copper conductor cable. 4.5 1x2.5sqmm 4.51 1x1.5sqmm 4.52 1x4sqmm 4.53 3x2.5sqmm ( 3 core round conductor ) 4.54 3x4sqmm ( 3 core round conductor ) 4.55 3x1.5sqmm ( 3 core round conductor ) 4.56 supply of 400mm sweep ac 230 / 250 volts, 50 hz wall mounting revolving fan with brackets etc compete. 4.57 supply of ac ceiling fan of following sweep 220 volts without regulator i / c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm. 4.58 overhauling of celing fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter / split pin, varnish if required etc. as required complete ( excluding manpower ) 4.59 rewinding of ceiling fans of any size i / c dismantling of rotor cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal / abnormal height and refixing as required ( excluding manpower ) 4.6 rewinding of exhaust fans of any size i / c dismantling cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal / abnormal height and refixing as required ( excluding manpower ) 4.61 overhauling of exhaust fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter / split pin, varnish if required etc. as required complete ( excluding manpower ) 4.62 cleaning of ceiling fan / wall fan / exhaust fan with detergent at site ( excluding manpower ) 4.63 hand gloves rubber 4.64 duster 4.65 material required having life of 12 months 4.66 foldable multipurpose aluminium super ladder for home and industrial purpose ( 12 feet ) 4.67 emergency rechargeable led torch light. 4.68 safety shoe...

Medical Education And Training - Uttar Pradesh

37728564 supply of chemical glass ware lab ware regents kit etc , isopropyl alcohol 5 lt bottle , papanicolau o.g.6 125 mlbottle , papanicolau e.a 36 125 mlbottle , papanicolau e.a 65 125 mlbottle , may.grunwald stain (mgg) 100 mlbottle , giemsa staining 100 mlbottle , h2so4 (sulphuric acid) 500 mlbottle , methanol 500 mlbottle , diethy ethyl ether l.r 500 mlbottle , leishman’s stain solution (cytochrome) 500 mlbottle , tincture benzoin 100 mlbottle , semen diluting fluid 200 ml bottle , platelet diluting fluid 50 mlbottle , chloroform 05ltbottle , wbc diluting fluid 500 ml bottle , rbc diluting fluid 500 mlbottle , n/ 10 hcl 1000ml bottle , formaldehyde 5 ltbottle , xylene 2.5ltbottle , conc. hcl(hydrochloric acid) 500ml bottle , liquid ammonia 500ml bottle , d.p.x. 250 ml bottle , conc.nitric acid 500mlbottle , glycerine 500 ml bottle , glycerine 1000 ml bottle , liquid paraffin 500 ml bottle , na oh(sodium hydroxide) 500 ml bottle , poly l lysine solution 100 ml bottle , citric acid (anhydrous pure) 1000 ml bottle , h 2 o2(hydrogen peroxide) 1000 mlbottle , deionized water 5 lt. bottle , schiffsreagent 500 ml bottle , bendictreagent 500 ml , drabkinssolution 5lit , fouchet’s reagent 200 ml , ehrlich reagent 200 ml , methylene blue stain 125mlbottle , a.f.bstain kit , carbolfuchsin stain 125mlbottle , reticulocytestain(biolab) 01 packet , acetone 500 mlbottle , sodium hypo chloride 5 ltr bottle , spirit 5ltr bottle , glucose god pod kit 500 ml , glacial acetic acid 500ml bottle , hematoxylin stain powder(sd fine) 25gm/ 5 gmpacket , eosin powder (water soluble) 25gm packet , aluminum potassium sulphate500 gmpacket , mercuric oxide red 500 gm packet , wax 600 620 500gmpacket , albumin powder 500 gmpacket , periodic acid 25 gmpacket , mercuric oxide 25gmpacket , dextrose (anhydrous) 500 gm packet , sulphur powder100 gm , barium chloridepowder500 gm , ammonium sulphate500 gm , sodium sulphate 500 gm , sulphosalicylicacid 500 gm , gentian violet100 gm , tris buffer (sd fine) 500 gmpacket , edta 100 gmpacket , low profiledisposablemicrotome blade for cutting tissue section , urinestrip( distix) packet (1x100 strips) , phosphotungisticacid 100 gmpacket , brilliant crystalblue stain 100 gm , plastictissue embedding cassettes packet(1x1000 pieces) , oxalic acid 500 gm , ferric chloride 500 gm , sodium thio sulphate 500 gm , potassium ferrocyanide 500 gm , sodium chloride 500 gm , sodium nitroprusside 500 gm , orthotoludine reagent 500 gm , benzidinepowder 25 gm , diamino benzidine 25 gm powder , total protein kit , albumin kit , serum creatinine kit , serum urea kit , serumsgot kit , serum sgpt kit , directs.bilirubinkit , serumcalcium kit , serumalkalinephosphate kit , serumcholesterol kit , serumtriglyceride kit , serum hdl cholesterol kit , serumuric acid kit , tpo(thyroid peroxidase antibody) 6 ml vial , mouse/rabbit specific polymer hrp dab ihc detection kit 15 ml vial , desminantibody (ihc) 6 ml vial , vimentin antibody (ihc) 6ml vial , estrogen receptor antibody (er) 6ml vial , anti progesterone receptor antibody 6ml vial , anti s 100 antibody 6ml vial , anti human her2/neu antibody 6ml vial , anti human cytokeratin(pan) antibody cocktail 6ml vial , anti melanoma antibody( anti hmb45 antibody) 6ml vial , anti neuron specific enolase (nse) antibody 6ml vial , anti cd45 antibody 6ml vial , anti hpv 16 antibody 6ml vial , anti cd20 antibody 6ml vial , anti cd15 antibody 6ml vial , anti cd30 antibody 6ml vial , antibody (anti c –kit) 6ml vial , myeloperoxidase reagent 6ml vial , anti ki 67 antibody6ml vial , antiecadherin antibody 6ml vial , anticd 34 antibody 6ml vial , anti p 63 antibody 6ml vial , antip 53 antibody 6ml vial , anti smoothmuscle actin antibody 6ml vial , anti ck 6 antibody 6ml vial , anti ck 17 antibody 6ml vial , anti cd 68 antibody 6ml vial , whatman filter papersheet , coplin jar (plastic) 01piece , tuff’s jar (glass) piece , k3 edta vacutainar 1 x100 , plain vacutainar 1 x100 , riya vial( plastic) 1 x100 , test tube stand(plastic) piece , test tube holder piece , plastic beaker 25ml piece , plastic beaker 100ml piece , semen collection container 20 ml (1x50) packet , urine sample container 50 ml (1x50) packet , micro tips pippt(200 1000 ul) , micro tips pippt (20 200 ul) , sprit lamp 50ml piece , plastic dropper piece , pipettebulb piece , glass testtube 7ml,piece , glass testtube 10ml,piece , glass testtube20ml piece , glass slide (blue star) packet , cover slip (blue star) packet , neubauer chamberpiece , glass pipette 5 ml 20 micro lit piece , glass pipette 10 ml 20 micro lit piece , glass pipette 1 ml 20 micro lit piece , micropipette 10microlitre fix piece , micro pipette 100microlitre fix piece , micro pipette(5 50)microlitrevariablepiece , micro pipette 20 microlitre fix piece , micro pipette 1000 microlitrefixpiece , micro pipette50 microlitrefixpiece , wintrobe esr tube with stand piece , westergreen esrpipette with stand piece , pricking needileno 23 (1 x100) packet , pricking needileno 24 (1 x100) packet , pricking needileno 21 (1 x100) packet , pricking needileno 20 (1 x100) packet , surgicaltray 6x8 “ inch (rectangular) piece , microscopicslide tray (aluminium) holding capacity20 (3x1”inch)piece , bone marrow aspiration needle16 no piece , bone marrow aspiration needle18 nopiece , l p needle piece , histology tissue base mold (steel ) piece , bone marrow biopsy needle(trephinebiopsy) piece , glass rodpiece , ph paper strip (5.0 7.5) booklet(1x20 strips) , ph paper strip (2.0 10.5) booklet(1x20 strips) , lens cleaningpaperbooklet (9cmx14.5cm,100 leaves) , museum mounting jar(with cover) (10cm x 5cmx 20cm) , museum mounting jar(with cover) (15cm x 10cmx 25cm) , museum mounting jar(with cover) (16.2cm x 6cmx 18cm) , museum mounting jar(with cover) (12cm x 10cmx 20cm) , museum mounting jar(with cover) (12cm x 12cmx 20cm) , museum mounting jar(with cover) (17cm x 8cmx 18cm) , museum mounting jar(with cover) (5.5cm x 5cmx 10cm) , museum mounting jar(with cover) (17cm x 9.5cmx 30cm) , museum mounting jar(with cover) (28cm x 24cmx 29cm) , museum mounting jar(with cover) (21cm x 19cmx 27cm) , museum mounting jar(with cover) (11cm x 25cmx 24cm) , hiv rapid tridotkit , hbsag immunoassay rapid kit , hcv rapidkit,(fourth generation immunoassay for core,ns3,ns4,ns5) , rdt formprapidkit (immunochromatographic kit for pf/pan antigen) , vdrl rapid immunoassay kit , typhoidrapidkit (igg,igm) , filaria rapid ag card test , h3n2 rtpcr kit , zika virus rtpcr kit , dengue rapidkit (immunochromatographic assay for ns1,igg ,igm) , plain vial5 ml vial , abo rh anti sera10 ml packet , ppd vial 5 ml vial , sodium citrate vial 5 ml vial , capillary tube piece , a.h.g. 5ml , anti a1 lectin 5ml , anti h lectin 5ml , anti d (igm + igg monoclonal) 10ml , pt 5ml , aptt 3ml , calcium chloride 10ml , bovine albumin 5ml , hiv rapid kit 4th generation , hiv rapid kit 3th generation , hcv rapidkit,3th generation , hbaag rapid kit 4th generation , hbaag rapid kit 3th generation , hiv elisa kit 4th generation , hcv elisa kit 4th generation , hcv elisa kit 3th generation , hbaag elisa kit 4th generation , hbaag elisa kit 3th generation , troniquete , micro pipette 10 ul fix , micro pipette 50 ul fix , micro pipette 25 ul fix , micro pipette 100 ul fix , micro pipette 1000 ul fix , micro pipette 100 1000 ul variable , micro pipette 10 100 ul variable , micro pipette 0 10 ul variable , micro pipette 20 200 ul variable , micro pipette stand (big) plastic make , micro pipette stand (small) plastic make , transfer bag of 300ml , double bag 350ml with sagm and diversion pouch (with luer adapter) , tripal blood bag 350ml with sagm and diversion pouch (with luer adapter) , leucodepltion blood bag 350ml (inline top and top) , leucodepltion blood bag 350ml (lab side) , pregnancy kit test , cappilary tub , swab stick , benedict reagent quanitateive 500 ml , benedict reagent qualitateive 500 ml , sulphar powder 500 gm , occult blood powder 100gm , hydrozen peroxide 500ml , egg albumin 500gm , sulphuric acid 1000ml , sodium hydroxide 500gm , copper sulphate 500gm , picric acid 500ml , arcino molibate 500ml , phaspho tungstic acid 500gm , sodium carbonate 500gm , nitric acid 500ml , silver nitrate 25gm , hydrochloric acid 500ml , taffers reagent 250ml , bromo cresol green reagent box , urea kit , protein kit , cholesterol kit , pipette 1ml , pipette 2ml , test tub , burette with tip , burette stopper , burette stand , filter paper , mesauring cylinder 50ml , beaker 250ml , beaker 500ml , round bottle flask 200ml , conical flask 200ml , urin jar plastic , funnel plastic , cuvette colouimeton , dispenser bottle , amikacin 30 mcg / disc , 100 disc / vial , amoxicillin clavulanic acid 20/10 mcg/ disc , 100 disc / vial , cefoperazone75 mcg / disc , 100 disc / vial , ceftriaxone 30 mcg / disc , 100 disc / vial , nitrofurantoin 300 mcg/ disc , 100 disc / vial , ceftazidime /avibacatam 30/10 mcg / disc , 100 disc / vial , ofloxacin 5 mcg/ disc , 100 disc / vial , ceftazidime /clavulanic acid 30/10 mcg / disc , 100 disc / vial , ciprofloxacin 5 mcg / disc , 100 disc / vial , ertapenem 10 mcg/ disc , 100 disc / vial , gentamicin 10 mcg / disc , 100 disc / vial , imipenem 10 mcg / disc , 100 disc / vial , levofloxacin 5 mcg / disc , 100 disc / vial , meropenem 10 mcg / disc , 100 disc / vial , moxifloxacin 5 mcg / disc , 100 disc / vial , prulifloxacin 5 mcg / disc , 100 disc / vial , vancomycin 30 mcg / disc , 100 disc / vial , azithromycin 15 mcg / disc , 100 disc / vial , erythromycin 15 mcg / disc , 100 disc / vial , chloramphenicol 30 mcg / disc , 100 disc / vial , piperacillin/tazobactam 100/10 mcg / disc , 100 disc / vial , tobramycin 10 mcg / disc , 100 disc / vial , tetracycline 30 mcg / disc , 100 disc / vial , cefotaxime 30 mcg / disc , 100 disc / vial , fluconazole 10 mcg / disc , 100 disc / vial , amphotericin b 100 units / disc , 100 disc / vial , itraconazole 30 mcg / disc , 100 disc / vial , nystatin 100 units / disc , 100 disc / vial , voriconazole 1mcg / disc , 100 disc / vial , co trimoxazole 25 mcg/ disc , 100 disc / vial , clindamycin 2 mcg/ disc , 100 disc / vial , teicoplanin 30 mcg/ disc , 100 disc / vial , cefdinir 5 mcg / disc , 100 disc / vial , cefpirome 30 mcg / disc , 100 disc / vial , imipenem –cilastin 10 mcg / disc , 100 disc / vial , ampicillin 2 mcg / disc , 100 disc / vial , ampicillin + sulbactam 6 mcg / disc , 100 disc / vial , polymyxin b 100 unit / disc , 100 disc / vial , bacitracin 8 unit / disc , 100 disc / vial , cefoxitin 20 mcg / disc , 100 disc / vial , linezolid 30 mcg / disc , 100 disc / vial , gentamicin (high) 50 mcg / disc , 100 disc / vial , faropenem 5 mcg / disc , 100 disc / vial , doxycycline 10 mcg / disc , 100 disc / vial , aztreonam 50 mcg / disc , 100 disc / vial , fosfomycin 50 mcg / disc , 100 disc / vial , novobiocin 30 mcg / disc , 100 disc / vial , optochin 5 mcg / disc , 100 disc / vial , cefuroxime 30 mcg / disc , 100 disc / vial , minocyline 30 mcg / disc , 100 disc / vial , nalidixicacid 30 mcg / disc , 100 disc / vial , norfloxacin 10 mcg / disc , 100 disc / vial , tigecycline 15 mcg / disc , 100 disc / vial , clarithromycin 15 mcg / disc , 100 disc / vial , ketoconazole 30 mcg / disc , 100 disc / vial , vancomycin (e test strip) 0.5 – 32 mcg/ml , cefepime/cefepime+clavulanic acid (e test strip) cefepime (0.25 16mcg)/cefepime+clavulanic acid (0.064 4 mcg) , imipenem and imipenem + edta(e test strip) imipenem (4 256 mcg) and imipenem+ edta (1 64 mcg) , macconkey agar 500g / bottle , muller hinton agar 500g / bottle , chrome universal agar 500g / bottle , lugol’s iodine 125 ml/bottle , urea agar base 100g / bottle , simmons citrate agar 100g / bottle , triple sugar iron agar 100g / bottle , blood agar base 500g / bottle , robertson cooked meat media 500g / bottle , sucrose 500g / bottle , lactose (lr) 500g / bottle , mannitol (c6h14c6) 500g / bottle , peptone, 500g / bottle , dextrose anhydrous(c6h12o6) 500g / bottle , bile esculin reagent/agar 500g / bottle , methylene blue for zn stain 500ml / bottle , carbol fuchsin for zn stain 500ml / bottle , giemsa stain 500ml / bottle , periodic acid schiff stain 500ml / bottle , safranine for zn stain 500ml / bottle , gentian violet(crystal) 100g / bottle , phenol (c6h5oh) (crystal) 500g / bottle , methyl red reagent 500g / bottle , phenyl pyruvic acid(ppa test) 100g / bottle , prepared oxidase disc 50 disc/ box , iodine (crystal)100g / bottle , tri sodium citrate ( na3c6h5o72h2o) 500g / bottle , citric acid (c6h8o7) 500g / bottle , kovac’s indole reagent 100ml / bottle , 40 % urea (nh2conh7) 500g / bottle , antibiotic zone scale 1pc/box , antisera salmonella o and h a,2 ml / vial , antisera shigella dysenteriae, 2 ml / vial , antisera shigella flexnari, 2 ml / vial , antisera shiegella sonnie,2 ml / vial , antisera vibrio cholera o139 ,2 ml / vial , atcc strain e.coli 25922,freeze dried lyophilized / vial , atcc strain e.coli 35218, freeze dried lyophilized / vial , atcc strain pseudomonas aeruginosa 27853 freeze dried lyophilized / vial , atcc strain staphylococcus aureus 25923 freeze dried lyophilized / vial , atcc strain staphylococcus aureus 29213 freeze dried lyophilized / vial , mounted peripheral blood smear slides for gametocytes of plasmodium vivax and falciparum,(1 – slide) , potassium permagnate (kmno4) 500g / bottle , formalin (20%) 500ml / bottle , methanol (ch3oh) 500ml / bottle , acetone (lr) (reagent ) 500ml / bottle , 100 % sulphuric acid (h2so4) 500ml / bottle , gram’s iodine 500ml / bottle , boric acid500g / bottle , di sodium hydrogen ortho phosphate500g / bottle , formaldehydesolution (37 41)%1000ml / bottle , potassium iodide (ki) 500g / bottle , hydrogen peroxide solution(h2o2) 6%1000ml / bottle , sodium hydroxide pellets purified (naoh) 500g / bottle , potassiumhydroxide pellets (koh) 500g / bottle , sodium chloride (nacl) 500g / bottle , amyl alcohol ( c5h11oh)500ml / bottle , xylene sulphur 500ml / bottle , 70 % isopropyl alcohol 500ml / bottle , normal saline 500ml / bottle , digital weighing balance 2kg/ machine , test tube (glass 7ml) 100pc/ pkt , sterile swab stick, 100pc/pkt , test tube holder (small)10pc/box , test tube holder (large)10pc/box , petri disk 90x90 (10pc/pkt) , petri disk 90x120, (10pc/pkt) , stock vial (50pc/pkt) , sterile disposable square petri plates (10pc/pkt) , viral transport medium (3ml/vial) , kovac’s indole reagent 100 ml/ bottle , centrifuge tubes 50ml (glass) 100pc/box , centrifuge tubes 15ml (glass) (consumable)100pc/box , erlenmeyer flask (1000ml) (consumable) 1pc , microtube rack (5x16 holes) per rack , wash bottle capacity 500ml/pc , sterile disposable forceps (10pc/pack) , steam indicator tape size 18mm (1 pc) , autoclavable dispo bag “14” (50/pack) , indicator ph paper(ph 5 to 7.5)(5 bundle / pack) , permanent marker pen (red/black) (narrow tip) (1 pc) , homogeniser with serrated pestle s.p 10ml (1 pc) , nichrome loop 4mm, double wound (10pc/pack) , nichrome loop 2mm, double wound (10pc/pack) , semisolid imrv medium and selective supplement fd19 2vl, 500gm/bottle , sample discarding jar 3l capacity (borosil) (1 pc) , sample discarding jar 5l capacity (borosil) (1 pc) , conical flask500ml capacity(borosil) (1 pc) , kala azar detection rapid test (25kit/box) , blood culture bottle/bhi (paediatric) 20ml capacity (10pc/box) , blood culture bottle /bhi(adult) 70ml capacity (10pc/box) , india ink reagent (nigrosin stain 10% w/v (100 ml) and methylene blue (125ml/bottle) , scrub typhus igm elisa 96well test kit/box , chikungunya igm elisa 96well test kit/box , je igm capture elisa 96well test kit/box , dengue igm elisa 96well testkit/box , dengue ns 1 ag elisa 96well test kit/box , cryptococcal ag rapid test (25kit/box) , l j medium slant 10 slant/pack , capped collection tube 1.5ml capacity (50pc/box) , microamp optical tube 8/strips (0.2 ml capacity) , microamp optical 8 cap strips (0.2 ml) , micro centrifuge tube 1.5ml capacity (500pc/box) , serological pipette 10ml (200pc/box) , serological pipette 5ml (250pc/box) , art barrier specialty pipettetips 100 1000?l racked(96x1 box) , art barrier specialty pipette tips 20 200?l racked (96x1 box) , art barrier specialty pipette tips 2 20?l racked (96x1 box) , art barrier specialty pipette tips 50?l racked (96x1 box) , art barrier specialty pipette tips 0 10?l racked (96x1 box) , safeskin purple nitrile gloves (medium) 100/box , n95 particulate respirator (niosh approved) 1pc , kimwipes 37.33x42.16 cmn (140/box) , cryo vial sterile 1.8ml (25vial/pkt) , cryo box 1.8ml (9x9 wells)(1 x 4 / box) , fg optical adhesive covers for pcr, 1pc , microamp optical 96 well reaction plate(0.2ml),(1 plate) , zip lock bag 21.3x18cm (10bag/box) , 96 well pcr plate, (1 plate) , falcon tube 10ml (1pc) , falcon tube50ml (1pc) , dacron swab stick (nylon flocked) (100pc/box) , polypropylene trigger sprayers (500ml), 1pc , stainless steel rectangular pan with sliding lid and handles tapered sides ( size 11 x 8 inch),1pc , paraffin film (m) (1 roll) , red cap tube 3ml (1 pc) , aluminum foil (72 meter) (1 pc) , isopropanol 99.9%(500ml/bottle) , spirit surgical grade (1lt/bottle) , spirit absolute (40 lt/gallon) , hypochlorite soln (5%/4.6%) (1lt/bottle) , sterilium hand rub ( 500ml/bottle) , liquid hand wash (750ml/pack) , blotting paper (1 sheet) , tourniquets for blood collection (1 pc) , loose gloves m (7/7.5)(100/box) , surgical gloves m (7/7.5),(1 pc) , 3 ply surgical mask , (1 pc) , surgical head cap, (1 pc) , face/protective shield , (1 pc) , bleaching powder (25kg/bag) , protective goggles (1 pc) , rna extraction kit(1 rxn) , rna zap water 200ml /bottle , ethanol absolute molecular grade(500ml/bottle) , thermacol transport box (18cm x 12 cm) (500pc/bag) , tissue paper (toilet paper roll)(9pc/pack) , labeling stickers sheets(st 65a4) (100sheets/pack) , disposable tongue depressor (spatula) (100pc/pack) , nuclease free water (molecular grade) 1000ml/pack , glucose strip , taqpath multiplex rt pcr kit for the detection sars cov 2 1000 rxn , taqman sequence detection (primer + probe) for screening (e gene & rnp) and confirmatory (rdrp, & hku orf ib) , seegene allplex 2019 ncov assay r , mylab patho detect covid 19 qualitative pcr kit , a*star fortitued kit 2.0 covid 19 rt pcr test , pandemic h1n109 assay set 1000 rxn , super script iii platinum qrt pcr reagent 5 rxn , agpath one step rt pcr reagent , labgun covid 19 rt pcr kit , bgi rt pcr kit for detection sars cov 2 , 1 napthol 200 gm , 2,4 dinitrophenyl hydrazine 300 gm , 2 amino diphenyl oxalic acid 500 gm , 2 chloro 2h azirine 500 gm , 2 napthol 250 gm , 3,5 dinitrosalicylic acid 500 gm , 8 hydroxy quinoline 250 gm , absolute ethanol 10 lit , acacia 500 gm , acetaldehyde 500 ml , acetamide 500 gm , acetanilide 1 kg , acetic acid 10 lit , acetic anhydride 2.5 lit. , acetone 05 lit , acetonitrile 05 lit , acetophenone 500ml , acetyl acetone 1 lit , acetylcholine iodide 5gm , activated charcoal 1kg , nutrient agar 500gm , alcohol /spirit 25lit , almond oil 1lit , aloe vera gel 1kg , alpha amylase 100gm , alpha napthol 250gm , aluminium chloride 1kg , aluminium hydroxide 500gm , aluminium sulphate 500gm , amaranth red 100gm , amino acid kit , ammonia 10 lit , ammonium acetate 1kg , ammonium bicarbonate 500gm , ammonium carbonate 1kg , ammonium chloride 1kg , ammonium citrate (tri) 500gm , ammonium hydroxide 1kg , ammonium molybdate 500gm , ammonium nitrate 1kg , ammonium oxalate 500gm , ammonium reineckate 1kg , ammonium sulphate 1kg , amyloglucosidase 50ml , anhydrous sodium sulfite 1kg , aniline 5lit , aniline acetate 500gm , anthranilic acid 250gm , apple essence 50ml , arachis oil 500ml , arsenic trioxide 500gm , ascorbic acid 500gm , ashwagandha 500gm , aspartic acid 100gm , aspirin 1kg , atropine sulphate 10ml , atropine sulphate 25gm , bahera 1kg , barfoed’s reagent 1lit , barium chloride 1kg , barium sulphate 500gm , bay leaf 500gm , beef extract 500gm , beeswax 2kg , belladonna leaf dry 500gm , benedict’s reagent 1 lit , bentonite powder 1kg , benzaldehyde 5 lit , benzamide 1kg , benzene 2.5 lit , benzidine 500 gm , benzil 1kg , benzoic acid 5kg , benzoic anhydride 500gm , benzoin 500gm , benzothiazole 250gm , benzoyl chloride 4 lit , benzyl alcohol 2.5 lit , benzylpenicillin 250gm , bial’s reagent 1lit , blood group test kit (10 ml anti a,b & d) , borax 1kg , boric acid 500gm , bovine serum albumin 10gm , bramhi 500gm , brilliant blue 5gm , bromine 500ml , bromocresol green solution 250ml , butanol 2.5 lit , butyl isocyanate 500 gm , cadmium sulfate 5gm , caffeine 500gm , calamine 1kg , calcium chloride anhydrous 2.5kg , calcium gluconate 500gm , calcium hydroxide 5kg , camphor 250gm , carbolfuchsin 100gm , carbon tetrachloride 2.5 lit , cardamom 250 gm , carrageenan 500gm , castor oil 2.5 lit , catechol 500gm , cellulose acetate hydrogen phthalate 500gm , ceric ammonium sulphate 500gm , cetyl alcohol 500gm , chandan powder 500gm , charcoal500gm , chloral hydrate 500gm , chloroform 10 lit , chloroquine powder250gm , chlorosulfonic acid1 lit , chlorpheniramine maleate powder 250gm , chlorpromazine 250gm , cinchona 500 gm , cinnamic acid 250 gm , cinnamon 500 gm , citric acid 500 gm , clove 500 gm , cobalt chloride 500 gm , cocoa butter 200 gm , codeine phosphate 50 gm , compound tartrazine solution 100gm , copper (ii) acetate 2.5kg , copper (ii) oxide 1kg , copper (ii) sulphate 1kg , copper (metal) turning 500gm , copper sulfate 1kg , coriander 500gm , corn oil 500ml , corn starch 500gm , creatinine 100gm , crystal violet 500ml , cupric acetate 500gm , dapsone powder 250gm , dextrin 500gm , dextrose 1kg , dichloro methane 5lit , diethyl ether10lit , diethylmalonate500ml , dioscorea 250gm , diphenylamine 500gm , disodium edta 500gm , disodium phosphate heptahydrate 1kg , dmso 5lit , dragendroff’s reagent 1lit , ephedra 500gm , eriochrome black t (solochrome black t) 25gm , ethanol 10lit , ethyl acetate 5lit , ethyl acetoacetate5lit , ethyl benzoate 500ml , ethyl cellulose500gm , ethylene diamine tetra acetic acid (edta) 2kg , eucalyptus oil 500ml , eudragit 500gm , fehling’s solution a 2lit , fehling’s solution b 2lit , ferric ammonium sulphate 1kg , ferric chloride 500gm , ferric chloride 1kg , ferrous sulphate 500gm , formaldehyde 5lit , formic acid 5lit , fructose 1kg , furosemide 25gm , gelatin 1kg , glacial acetic acid 5lit , glucose 1kg , glycine 1kg , glycine 100gm , glyoxalic acid 1lit , granulated zinc 500gm , gum trgacanth powder 1kg , hagers reagent 1lit , harde 500gm , histamine 25gm , honey 1kg , hydrazine hydrate 2.5 lit , hydrochloric acid 10lit , hydrogen peroxide 1 lit , hydroxy napthol blue 25gm , hydroxy propyl methyl cellulose 500gm , hydroxylamine hydrochloride 500gm , ibuprofen powder 500gm , iodine 500gm , iron oxide 500gm , isabgol 1kg , iso propanolol 2.5 lit , isoniazid powder 250gm , jatamansi 500gm , kaolin 500gm , lactose 1kg , lanolin 1kg , lead acetate 1kg , lead nitrate 500gm , lead subacetate 2lit , leishman reagent in methanol 25gm , lemon essential oil 250ml , leucine 25gm , light magnesium oxide 500gm , light mineral oil5lit , light petroleum ether (40 600) 2.5 lit , liquid paraffin (heavy) 500ml , liquid paraffin (light) 500ml , liquorice 500gm , long pepper 500gm , lwinoff’s reagent 1 lit , magnesium chloride 1kg , magnesium hydroxide 500gm , magnesium stearate 2kg , magnesium sulfate 2kg , magnesium turning 250gm , malonic acid 1kg , maltose 1kg , mayer’s reagent 1lit , menthol 500gm , mercuric chloride 50gm , mercurous nitrate 25gm , metaphosphoric acid 1kg , methanol 10 lit , methi 500gm , methyl blue 25gm , methyl cellulose 500gm , methyl ethyl ketone 1 lit , methyl orange 100gm , methyl orange indicator 250ml , methyl paraben 500gm , methyl red 25gm , methyl red 500ml , methyl salicylate 500ml , methylene blue500 ml , methylene chloride 2.5 lit , metol solution 100 ml , metronidazole powder 250 gm , microcrystalline cellulose 1kg , millon’s reagent 1 lit. , mineral oil 500 ml , molisch reagent 100 ml , monosodium phosphate 1 kg , morpholino propane sulphonic acid (mops) 25 gm , nagkeshara 500 gm , napthol blue 25 gm , napthoquinone100 gm , n hexane 5 lit , ninhydrin 100 gm , nitric acid 10 lit , n phenylanthranilic acid (ferroin sulphate) 100 ml , o cresol 500 ml , octanol 2.5 lit , oil of anise 30 ml , olive oil 1 lit , o phenylenediamine 250 gm , orange oil 500 ml , orthophosphoric acid 2.5 lit , osmic acid 500 gm , oxalic acid 500 gm , o xylene 500 ml , p aminobenzoic acid 1 kg , para amino benzoic acid (paba) 250 gm , paracetamol powder 500 gm , paraffin liquid heavy5 lit. , paraffin liquid light5 lit. , p benzoquinone100 gm , p chloromercuribenzoic acid 1 kg , peg 200 2.5 lit , peg 3350 500 gm , peg 400 500 ml , peg 400 2.5 lit , peg 6000 500 gm , peptone soya 500 gm , perchloric acid 2.5 lit , petroleum ether 5 lit , phenobarbitone 10 gm , phenol 1 kg , phenophthaline indicator , phenyl hydrazine hydrochloride 500 gm , phenylalanine25 gm , phloroglucinol 250 gm , phosphoric acid 1 kg , physostigmine 10 gm , picric acid 500 gm , picrolonic acid 500 gm , pine oil 250 ml , pineapple flavour100 ml , piper longum fruit 500 gm , piper longum root 500 gm , piperazine citrate 500 gm , plumbagoo zeylanica 500 gm , potassiumdichromate 2 kg , potassium bromide 2 kg , potassium chloride 2 kg , potassium dihydrogen phosphate 500 gm , potassium ferricyanide 1 kg , potassium ferrocyanide 1 kg , potassium hydrogen phthalate 1 kg , potassium hydroxide 2 kg , potassium iodide 500 gm , potassium permanganate 500 gm , potassium sodium tartrate 500 gm , potassium sulphate 1kg , precipitated chalk 500 gm , precipitated sulphur 500 gm , propanol 05 lit , propyl glycol 1 kg , propyl paraben 500 gm , propylene glycol 2.5 lit , p toluene sulfonylamide 500 gm , p toluene sulphonic acid 2.5 lit , pyridine 2.5 lit , quinine sulphate 100 gm , rbc diluting fluid 500 ml , rectified sprit 5 lit , resorcinol 2 kg , rose oil 500 ml , ruthenium red 5 gm , saccharin sodium 500 gm , safranine 500 ml , salicylic acid 1 kg , seliwanoff’s reagent 500 ml , senna leaves 500 gm , sesame oil 2.5 lit , shakhpushpi 500 gm , shatavari 500 gm , silica gel 100 200 mesh (for column chromatography) 2 kg , silica gel 60 120 mesh (for column chromatography) 2 kg , silica gel g 5 kg , silver nitrate 25 gm , sodium acetate 1 kg , sodium arsenate dibasic 100 gm , sodium benzoate 1 kg , sodium bicarbonate 5 kg , sodium bisulfate 500 gm , sodium carbonate 2 kg , sodium chloride 5 kg , sodium citrate 2 kg , sodium dihydrogen phosphate 1 kg , sodium dodecyl sulphate 5 kg , sodium formate500 g , sodium hydroxide 2.5 kg , sodium metal 500 gm , sodium methyl paraben 500 gm , sodium nitrite1 kg , sodium nitropruside 1 kg , sodium oxalate 500 gm , sodium phosphate dibasic 1 kg , sodium phosphate monobasic 1 kg , sodium picrate 500 gm , sodium potassium tartarate 500 gm , sodium propyl paraben 250 gm , sodium salicylate 500 gm , sodium succinate 500 gm , sodium sulfate 1 kg , sodium thiocyanate 500 gm , sodium thiosulfate 500g , sodium tungstate250 gm , soft soap 1 kg , solochrome black t 25 gm , sorbitol solution (70%) 250 gm , spermaceti 500 gm , standard cholesterol 25 gm , starch 2 kg , stearicacid 1 kg , strong ammonium solution 2.5 lit , sucrose 2 kg , sudan red iii 5 gm , sugar 2 kg , sulfanilamide 500 gm , sulfuric acid 15 lit , sulphamic acid500 gm , sulphanilic acid 500 g , sulphosalicylic acid 500 gm , sulphur 1 kg , talc 2 kg , tannic acid 1 kg , tartaric acid 1 kg , tartrazine yellow 25 gm , t butyl alcohol 1 lit , tetracycline hydrochloride 250 gm , thioglycollic acid 500 ml , thiourea 500 gm , thymol blue 25 gm , titanium dioxide 500 gm , toluene 5 lit , tragacanth1 kg , triethanol amine 2.5 lit , trisodium citrate, dihydrate 500 gm , turpentine oil 300 ml , tween 80 500 gm , tyrosine 100 gm , urea 1 kg , uric acid 25 gm , vanillin 100 gm , vegetable oil 1 lit , wagners reagent 1 lit. , wbc diluting fluid (turks fluid) 500 ml , white ointment 1 kg , white wax 500 gm , xylenol orange 10 gm , yellow soft paraffin 500 gm , zinc dust 500 gm , zinc oxide 2 kg , zinc stearate 1 kg , zinc sulfate 1 kg , zinziberofficinalis500 gm , air condenser 300 mm (with joint b 19 or b 24 and plain without joint) , ampoules , arsenic test apparatus , beaker 100ml , beaker 250ml , beaker 500ml , beaker 1000ml , boiling tubes , borer dia. 8mm, thickness 3mm , length 99 , buchnerfunnel ceramic and plastic 70mm , buchnerfunnel ceramic and plastic 110 mm , buchner flask 250ml , buchner flask 500ml , burette stand , burette with rota flow stop cock , capillaries for melting point determination , centrifugal tube graduated , centrifugal tube plain , china dish , clavengerapparatus , column for column chromatography , conical flask 100 ml , conical flask250ml , cover slips , dessicator plain 150 mm , dessicator plain 250 mm , distillation flask bg , distillation set (condenser reciever) , distillation unit , droppong bottle 60 ml , droppong bottle 125 ml , eppindroff1.5 ml , eppindroff2.0 ml , erlenmeyer flask , filter paper rim 8x22 , flat bottom flask (100 and 250) , flilter paper pkt round , funnel (small, medium and large size) , glass rod , glass slides , graduated measuring cylinder 10ml , graduated measuring cylinder 50ml , graduated measuring cylinder 100ml , graduated measuring cylinder 500ml , graduated measuring cylinder 1000 ml , ignition tube (pkt of 5 grs, superior quality) , iodine flask , kipps apparatus , lens cleaning tissue (paper book of 100) , litmus paper red/blue pkt of 100 lbs , microtips , mortar pastel (dia 5, 6 and 8) , nessler cylinder (50 ml) , ostwald viscometer , petridish 100 mm , petridish 75mm , ph paper in plastic box pkt of 100 lbs , pipette bulb rubber , pipette pump 2 ml , pipette pump 25ml , pipette pump 10ml , pipette stand horizontal for 12 pipettte , pipette volumetric20ml , pipette volumetric 10ml , pipette volumetric 25ml , pipettes 1ml , pipettes 2ml , pipettes 5ml , pipettes 10ml , plane slide with cavity , reagent bottle narrow mouth amber 500 ml , reagent bottle narrow mouth amber 125ml , reagent bottle narrow mouth amber 250ml , round bottom flask (250 ml) , round bottom flask (double and triple neck) , rubber cork (extra soft) superior quality (top dia 13mm) , rubber tubing coil (10 meter) , separating funnel 250 ml , separating funnel 100ml , silica crucibles 15 mm , soxhlet apparatus complete with all capacity , specific gravity bottle n.g. 25 ml , specific gravity bottle n.g. 50 ml , starch iodine paper 100 leaves , steam distillation assembly , stoppered tubes , suction pump made of glass , test tube , test tube holder , test tube stand , thermometer 30 cm length (10 360 degree) , thiele`s tube , tlc chamber with lid , tlc plates , tlc sprayer , volumetric flask 10ml , volumetric flask 25ml , volumetric flask 100ml , volumetric flask 250ml , volumetric flask 1000ml , wash bottle 250 ml , watch glass , whatman filter paper for paper chromatography , white tiles , wire gauge , rnase/dnase away(ivd, us fda, icmr approved) 250ml , taqpath covid 19 combo kit multiplex real time rt pcr (catalog numbers a47813 and a47814)(ivd, us fda, icmr approved) , a* star fortitude kit 2.0 covid 19 qualitative pcr kit(ivd, us fda, icmr approved) , mylabpatho detect covid 19 qualitative pcr kit(indian fda/ central drugs standard control organisatio (cdsco),icmr approved) , kilpest (blackbio) trupcr sars cov 2rt qpcr kit version 2 (usfda /or ce approved) , biomerieux argene sars cov 2 r gene(ivd, us fda, icmr approved) , water, ultrapure, free of dnase, rnase, protease, endonuclease(ivd, indian fda/ central drugs standard control organisatio (cdsco),icmr approved) 1 litre , n 95 particulate respirator (valved particulate respirator, 42cfr84 approved product, 95% filter efficiency level, effective against particulate aerosols free of oil) , wipes 37.33x42.16 cm(anti stat polyshield: anti static dispensing system reduces lint and electrostatic discharge, easily wipe up liquids, dust and tiny particles and are designed for delicate tasks) , cryo box 1.8ml (9x9) (chipboard, 132 x 132 x 51mm, square,durable plastic cryoboxes with keyed lid orientation and printed via location grid.) , zip lock bag 21.3x18cm(thickness: 52 micron, prevents aroma transfer, keep out dirt and moisture, made from fda approved) , polypropylene trigger sprayers (500ml)(made from durable, chemical resistant polypropylene,trigger sprayer with adapters.) , stainless steel rectangular pan with sliding lid and handles tapered sides (11x8 inch) (stainless steel, autoclavable, chemical resistantand for laboratory use) , deep well storage plasticware 96 well plate(height 4.1cm, wellcut 1 cm, length 12.1cm polypropylene) , plasticware magnetic 8 strip comb (height 4.5cm, length 10.2cm, distance between each comb=1cm) , duo rna elution plate 96 well (wall thiekness 6mm, nominal size 50, neutral glass) , reinelene solution (peracetic acid) 1x 5lit , glutaraldehyde 2.4% solution 1x 5 lit , self lock pouch (plastic) , deep well 96 plate (size 50mm, 200ul, wall thickness 6mm nominal size 50, neutral glass) , 96 tip comb for deep well plates (wall thickness 5mm, nominal size 90, neutral glass) , volmutric flask 500ml , rose water 250ml , manitol 500gm , renelene solution 5 litr. , cidex 5 litr. , cidex 1 litr. , carbolic acid 1000ml , hplc variant ii bts test ket 500test packet , inflamable sprit 5 ltr , rotoquac (hiv fourt) kit , anti sera a 10ml , anti sera b 10ml , anti sera d 10ml , hcv rapid kit 4th , medicated sprit 5ltr , savelon 05 ltr , savelon 01 ltr , distle water 05 ltr , reniplus solution 05 ltr , variant iind bts , albumin kit , protein kit , nacl 500ml , droper 3ml , cedarwood oil 5ml , reticulocytes counting fluid 100ml , improve newbarcounting chamber , rbc pipette , wbc pipette , reagent bottle (glass 250ml) , platelet diluting fluid 125ml , hemoglobino meter , acetic acid 1000ml , p 16 antibody 6ml vail , hemaccue cuvette , art barriar tips 20ul 200ul , art barriar tips 1000 ul , art barriar tips 10 ul , soda lime , 96 well pcr plate, sealer (rtpcr mechine) , pre filled automated rna extraction plate with tip comb (96 well zybio) , vtm , micri barrier tips 20 200 ul , micri barrier tips 10 ul , micri barrier tips 1000 ul...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

37704835 roof treatment, repair and painting of sub division office vth at 33/11kv sub station , phase 2, noida, dstt. gb nagar. , excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. csi no. 4.01 , earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside uppcl area including its roylty and carriage, loading/ unloading, spreading , watering, ramming in 20 cm layers and dressing of earth etc. for proper completion of the work. (csi no. 4.10) , concrete with 4cm gauge approved stone ballast, coarse sand and cement in proportion of 12:6:1 in foundations & under floors including supply of all materials, labour and tools and plants etc. required for proper completion of work.csi no. 5.02 , cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and t&p etc. required for proper completion of work. csi no. 5.06 , cement concrete with 2cm gauge approved hard stone ballast, coarse sandand cement in proportion of 3:1.5:1. including supply of all materials, labour,side shuttering if required and t&p etc. required for proper completion of work csi no. 5.21 , rcc work with cement approved coarse sandand 2 cm gauge graded approved hard stone ballast like grainite, quartzite etcin proportion 1:1.5:3 in lintels or bends and sun shade of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire,including necessary centering and smooth shuttering, including cost of all other materials labour and t&p etc. required for proper completion of work . csi no. 5.23 , rcc work with cement approved coarse sand and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etcin proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including necessary centering and smooth shuttering, including cost of all other materials labour and t&p etc. required for proper completion of work . (csi no. 5.24) , rcc work with cement, approved coarse sand(f.m. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite quartzite etc from dalla, jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. (csi no. 5.27) , rcc work with cement, approved coarse sand (f.m. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in rcc t beam slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p . (csi no. 5.29) , first class brickwork in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & t&p etc. required for proper completion of work. csi no. 6.01 , first class brickwork in 1:6 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work, thickness of wall not to be less than 1 brick (230mm). csi no. 6.01+6.07+6.08 , mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks , roof work ,window / boundary grill or railingand t/f rail etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials, lobour and t&p required for proper completion of work.csi no. 9.01 , as in item 9.01 above but when steel is to be provided by the department. (csi no. 9.02) , tmt or tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured separately csi no. 9.03 , supply and fixing galvanised mosquito proof jali (16x24 gauge) withm.s. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (csi no. 9.18) , providing and applying four courses ofwater proofing treatment at roofs consisting first course of straight run 85/25 grade bitumen confirming to i.s. 73 1961@0.7 kg/sqm, second course of roof guard consisting of polythene sheets weighting 0.12 kg/ sqm, with 75mm over laps, along roof slope, third course of cold cut back bitumen b.s. grade @ 1.0 kg/ sqm as per i.s. 7290 and the fourth and final course of 1:1.5:3 cement concrete, 25mm thick with water proofing compound (recron.3s) as per specifications, including all materials, labour and t & p etc. required for proper completion of work. old schedule csi no. 26.47 , first class brick tile flooring laid in cement mortar consisting one part of cement and three parts of approved coarse sand including cost of all materials, labour and t&p etc. required for proper completion of work. old schedule csi no. 26.48 , 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all material labour and t&p etc for proper completion of work. (csi no. 11.06) , 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. (csi no. 11.07) , 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work.csi no. 11.09 , add for extra labour to all items of plaster if done in ceiling. (csi no. 11.10) , 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and two parts of approved coarse sand laid in panels finished with 3mm.floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour & t&p etc. required for proper completion of the work.. csi no. 11.13 , s/mixing approved water proofing compound / hardner (cico,dr fixit etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. csi no. 11.15 , 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work.( cement consumtion 0.044 bag/sq.m.) csi no. 11.20 , 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. without base cc (csi no. 12.04) , supply and laying08 mm thick glazed floor tiles of kajaria, somany, johnson or equivalent make,with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and t&p etc. completion required for proper completion of the work. (csi no. 12.11) , supply and laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and t&p etc. completion required for proper completion of the work.(csi no. 12.12) , providing and fixing glass strips of 3.15 mm thickness & 35mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& t&p etc. completion required for proper completion of work. (csi no. 12.14) , painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint luxol or equivalent brand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103 1950. csi no. 13.01 , same as in item no. 24 above but for every coat after ist coat. csi no. 13.02 , same as in item 24 above but for every coat on previously painted old wood or iron work as required, for proper completion of work csi no. 13.03 , one priming coat and one coat oil bound acrelic distemper on new work including supply of all materials,labour and t&p etc. required for proper completion of the work.csi no. 13.08 , as in item 27 but for every coat after the first coat. csi no. 13.09 , as in item 27 but for every coat on previously old oil bound distempered surface.. csi no. 13.10 , finishing walls with water proof cement paint of approved make like super snowcem or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. csi 13.17 , same as in item no. 30 but for each coat of water proof cement paint after the first two coats to give an even shade. csi 13.18 , same as in item no. 30 but for each coat of water proof cement paint. on previously treated surface. csi 13.19 , applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i/c including cost of all material, labour, t & p etc required for proper completion of work. csi no. 13.20. , applying birla putty or equivalent putty on previousaly painted surface for smoothining and leveling of the surface as per requirement and direction of e/i including cost of all material , labour and t&p required for proper completion of work.csi no.13.21 , painting one coat with apex or equivalent brand weather coat paint on new wall surfaces (well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, t&p required for proper completion of work. (csi no. 13.22) , same as in item no 13.22 above but for every coat of additional apex or equivalent brand weather coat paint . (csi no. 13.23) , same as in item 13.22 but for each coat ofapex or equivalent brand weather coat paint .on previously treated surface. (csi no. 13.24) , dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the engineer in charge within a distance of 60 metres. csi no. 15.01 , dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the engineer incharge within a distance of 60 metres. csi no. 15.03 , dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer in charge within a distance of 60 metres. csi no. 15.05 , dismantling existing plaster including disposal of refuse as directed by the engineer i/c within a distance of 60 m.csi no. 15.11 , scrapping old white or colour wash or distemper including disposal of refuse as directed by the engineer i/c within a distance of 60 m. csi no. 15.12 , 20.04b renewing panes of 4.8 t0 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work.(a) glass of 4 mm thick panes. csi no 20.04 (a) , supply and fixing euro or equivalent make water storage tank four layer of desired capacity including supply of all materials, labour and t and p etc. required for proper completion of work csi no. 26.12 , supply and fixing brass stop cock heavy quality (200gms) 15mm dia isi marked (hindware make ) including supply of all materials, labour and tandp etc. required for proper completion of the work.. csi no. 26.14 , supply and fixing brass bib cock heavy quality 15mm dia (200gms) isi marked (hindware make) including supply of all materials, labour and tandp etc. required for proper completion of the work.. csi no. 26.16 b , supply and fixing cp brass angle valve heavy quality 15mm dia isi marked (hindware make) including supply of all materials, labour and tandp etc. required for proper completion of the work.. csi no. 26.16 i , supply and fixing cp brass pilar cock heavy quality 15mm dia isi marked (hindware make) including supply of all materials, labour and tandp etc. required for proper completion of the work.. csi no. 26.16 j , providing and fixing of 110 mm diap.v.c. pressure pipe (6 kg/sq.cm.) forwith specials such as tee, bend, socket, elbow etc.including supply of all material, labour, tandp etc. required for proper completion of work.. csi no. 26.17 , providing and fixing 15 mm dia isi approved cpvc pipes complete with special such as bend,tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required , cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.19) , providing and fixing 20 mm dia isi approved cpvc pipes complete with special such as bend,tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required , cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.20) , providing and fixing 25 mm dia isi approved cpvc pipes complete with special such as bend,tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required , cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.21) , providing and fixing 32 mm dia isi approved cpvc pipes complete with special such as bend,tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required , cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.22) , providing and fixing 40 mm dia isi approved cpvc pipes complete with special such as bend,tee, socket, cross,clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required , cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.23) , providing and fixing first quality white glazed orissa pattern w.c.pan hindustan, cera make. size 580 mm.(hindustan,cera make) with out p trapincluding supply of all materials,labour and t&p etc.complete. (csi no. 27.01) , providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked (hindustan,neycer / cera make) including supply of all materials, labour and t&p etc. required for proper completion of the work.(csi no. 27.08) , providing and fixing 10 litres low level pvc flushing cistern, complete with all fittings including supply of all materials, labour and t&p etc. required for proper completion of the work. (csi no. 27.12) , providing and fixing 600 mm x 450 mm beveled edge mirror of atul,kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work. (csi no. 27.15) , providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and t&p etc.required for proper completion of the work. (csi no. 27.19) , supply and fixing pvc nahani trap india make of heavy approved quality complete with ci grating,includingsupply of all materials,labour and t&p etc. required for proper completion of the work. (csi no. 27.21b) , providing and fixing 100 mm dia pvc p or s trap including cement concrete and all materials, labour cartage t&p etc.required for proper completion of the work.(for w.c.) (csi no. 27.24) , providing and fixing ci grating 100 mm dia includingall materials, labour cartage t&p etc.required for proper completion of the work. (csi no. 27.25) , providing and fixing stainless steel sink 610x450x200 mm heavy quality( isi marked ) includingall materials, labour cartage t&p etc.required for proper completion of the work. (csi no. 27.26) , providing and laying110 mm dia swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. (csi no. 27.29 c ) , wiring point for light with 1.5 sq. mm. fr pvc insulated multistrand single copper conductor cable in pvc conduit pipe concealed in the wall, 14 swg copper pvc coated earth continuity wire, and approved quality, piano type switch ceiling rose/angle/batten holder as per approved sample on 3mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect csi no uppwd 131(c) , wiring point for fan/fresh air fan (light duty exhaust fan) 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable pvc conduit pipe concealed in the wall, 14 swg copperearth continuity wire and approved quality, piano type switch & ceiling rose as per approved sample on 3mm thick phenolic laminated backelite sheet etc. of matching shade with wall colour complete in all respects as per direction of e/i. csi no uppwd 133(c) , wiring point for plug with 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable in pvc conduit pipe concealed in the wall 14 swg copper earth continuity wire and approved quality type switch and socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of e/i. csi no uppwd 134(c) , supply and wiring of submain with two numbers 4 sq. mm fr pvc insulated 1100 v grade multistand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick) pvc conduit concealed in wall complete with 1 number 2.5 sq. mm fr pvc insulated multistand copper conductor cable as earth continuity wire etc. complete in all respects. csi no uppwd 216 (c) , s/f 6 amp. to 32 amp. “c” series mcb 9 ka/10 ka (havells/mds make) csi no uppwd 1002(b) , s/f 63 amp. s.p. isolator of approved make and as per sample approved by e/i. csi no uppwd 1004 (b) , s/f surface/flush mounting 8 ways spn distribution board without mcb complete in all respect as per direction of e/i. csi no uppwd 1024(b) , supply and fixing of power plug with 15a/240v v flush type switch and 5 pin 15a/250v flush type universal socket in suitable m.s. box of 175mmx 100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. csi no uppwd 1139 , supply and fixing of chromium polished iron fitting with screws for doors and windows etcl drop 16 mm dia 300 mm long.csi no. 20.17 a , supply and fixing of chromium polished iron fitting with screws for doors and windows etc. tower bolt 10 mm dia 250 mm long.csi no. 20.17 b , supply and fixing of chromium polished iron fitting with screws for doors and windows etc. tower bolt 10 mm dia 100 mm long.csi no. 20.17 c , supply and fixing of chromium polished iron fitting with screws for doors and windows etc. iron hinges 100 mm size 12 gauge thick csi no. 20.17 d , supply and fixing of chromium polished iron fitting with screws for doors and windows etc. handle 100 mm size csi no. 20.17 f , supply and fixing of chromium polished iron fitting with screws for doors and windows etc. l drop 16 mm dia 200 mm long.csi no. 20.17 h , making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and t&p etc requiredfor proper completion of work.(csi no. 11.19) , rough cast finish to plasters of different mortars,add extra toplaster items.(csi no. 11.11) , supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the engineer incharge including necessary overlap, applying a coat of approved mastic paint below the tar felt & including supply of all materials, labour and t&p etc. required for proper completion of the work. (csi no. 10.06) , supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to i.s.2202 part 1 (1983) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & t&p etc. required for proper completion of work. (csi no. 8.57) , providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineerin charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) after two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge. (d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“all above operations to be done in order and as directed and specified by the engineer in charge :with average thickness of 120 mm and minimum thickness at khurra as 65 mm. (csi no. 28.28)...

Indian Army - Uttar Pradesh

37666882 bids are invited for boq items cp bib cock 15 mm long body make prayag comma pearl , cp sink mixer 15mm make prayag comma pearl , cp grating round 100 mm dia with waste hole , cp wall mixture with l bend provision for overhead shower make prayag oblique pearl , cp grating round 150 mm dia make prayag oblique pearl , wall mixture cp non telephonic make prayag comma pearl , cp health faucet with hook and 1 mtr tube make prayag comma pearl , cp shower rose 15x100 mm dia with arms make prayag comma pearl , cp jet spray with flexible pipe make prayag oblique pearl , cp bib cock 15mm fancy with flange make prayag comma pearl , cp mixer whb 15mm make prayag comma pearl total quantity : 796...

Indian Army - Uttar Pradesh

37666881 bids are invited for boq items glass pane 4mm frosted oblique tinted modiguard oblique saint gobain , prelaminated mdf board 19 mm make green ply comma kit ply comma century , prelaminated mdf board 12 mm make green ply comma kit ply comma century , glass pane 4mm make modiguard oblique saint gobain , glass pane 5mm 2x3x12 make modiguard oblique saint gobain , wash hand basin 550x400 mm make cera oblique parryware oblique hindustan , wc indian type 500x400mm make cera oblique parryware oblique hindustan , ewc with s trap make cera oblique parryware oblique hindustan , urinal half stall as per sample make cera oblique parryware , urinal 465x355x265 make cera oblique parryware , brass internal fitting spindle for bib cock , cp hand shower rose make prayag oblique pearl , cp bib cock 15mm standard make prayag comma pearl , cp pillar cock 15 mm make prayag comma pearl total quantity : 448...

Uttar Pradesh Jal Nigam - Uttar Pradesh

37644220 invitation of rates for supply of materials and piece rated works ( labour rates ) for remaining works of auditorium, banquet hall, boundary wall etc. works at nagar panchayat mailani, lakhimpur kheri as per nit and tender document , cement ( opc / ppc ) , coarse sand , fine sand , brick m 150 , tor steel 8mm dia , tor steel 10 mm dia , tor steel 12mm dia , tor steel 16mm dia , binding wire , stone grit 10 20mm , stone ballast , interlocking tile 80mm thick , granite , angle iron ( 40x40x5 ) , ms gate , obd paint ( 20 lt ) , exterior paint ( 20 lt ) , enamel paint ( black ) 20 lt , white cement , putty ( 40 kg ) , red oxide ( 20 lt ) , snowcem ( 40kg ) , glass panes 4mm thick , european sheet with cover & zed , l.l. cistern ( 10 lt ) , wash basin ( 550x440 ) , pillar cock 15mm , kitchen sink ( 1050x510x250 ) , pvc waste pipe 32mm , pvc waste pipe 40mm , beveled mirror ( 600x450 ) , one urinal with sistern , two urinal set with sistern , three urinal with sistern , pvc connection pipe 15mm , cp brass bib cock 15mm , cp brass long body 15mm , cp brass angle valve 15mm , cp brass two wayangle valve 15mm , cp brass shower 15mm , cp brass stop cock , pvc pipe 160mm ( 6 inch ) pipe , pvc elbow 160mm , pvc socket 160mm , pvc tee 160mm , cp west coupling 40mm , cp jali , 8mm dia c.p. / s.s jet with flexible tube. , c.p. brass bottle trap , toilet paper holder c.p brass , 15 mm c.p brass ablution health faucet assembly with 1.2 m long. , 15 mm c.p soap tray to the wall. , p / f 15 mm c.p brass towerail with complte. ( 60x2cm ) , moduler ms box ( 3x3 ) with sheet , moduler ms box ( 4x4 ) with sheet , moduler ms box ( 5x3 ) with sheet , moduler ms box ( 8x3 ) with sheet , moduler ms box ( 9x3 ) with sheet , moduler ms box ( 5x5 ) with sheet , moduler ms box ( 8x6 ) with sheet , moduler ms box ( 8x8 ) with sheet , switch 6amp , socket 6amp , switch 16amp , socket 16amp , ceiling fan 1200mm ( havells, bajaj etc. ) , fan regulator , exhaust fan 300mm , led tube 20w , distribution board 12way , isolator 40amp 4p , isolator 63amp 4p , mcb 6 32amp sp , copper wire 0.75sqm , copper wire 1.00sqm , copper wire 1.50sqm , copper wire 2.50sqm , copper wire 4.00sqm , copper cable 10mm3 fase 04 core , copper cable 16mm 3 fase 04 core , conduit pipe 25mm , surface junction 25mm , pvc bend 25mm , pvc saddle 25mm , holder , led bulb 9 w , ceiling rose , fan sheet , round sheet , china screw 1 inch , screw 1.5 inch , machnery screw 1 inch , machnery screw 1 .5inch , flixble pipe , cut out 63 amp , royal plug ( 100 pcs ) , royal screw 1 inch , tape roll , wall fan , providing & functioning of electrical pannel as per drawing & design , providing & functioning of electrical pannel as per drawing & design , providing & functioning of electrical pannel as per drawing & design , providing & functioning of stage lighting complteas perdesign & direction of engineer in charge. , providing & functioning of motorised curtain as per design & direction of engineer in charge. , providing & functioning of audio arrangement as per design & direction of engineer in charge. , providing & functioning of lcd / dlp projecter as per design & direction of engineer in charge. , filling of carted earth , l / c for making drain , l / c for making drain ( 25x45cm ) , l / c for makingdrain ( 25x30cm ) , l / c for making chamber chamber ( 90x80cm ) , l / c for making chamber ( 90x120cm ) , l / c for laying sewer line 160mm including e / w, p.c.c etc all t&p complte. , l / c for finishing 02 coat oil bond distemper , l / c for finishing 02 coat with water proofing cement paint. , l / c for finishing 02 coat with steel paint , l / c for finishing 02 coat with wood paint , l / c for finishing 02 coat with putty , e / w in ordnairay soil , l / c for p.c.c 1:4:8 , l / c for rccwork in beam with shuttering etc all labour t&p complte. , l / c for rccwork in collumn with shuttering etc all labour t&p complte. , l / c for rccwork in footing with shuttering etc all labour t&p complte. , l / c for 300 mmpiling work with boring, rcc casting etc all labour complte. , l / c for ms work cutting binding etc all complte. , b / w in s / s ( 230mm ) , b / w in s / s ( 115mm ) , 12 mm plaster , l / c for snowcem painting 02 coat & one coat white cement , p / laying bitumenpainting , ms angle 40x40x5 , p / f barbed wirefencing , painting angle iron , making grooves , p / f precast c.c jali , laying of interlocking , chase cutting in brickwork or r.c.c work & fixing of pvc conduct pipe repared all surface. , l / c wiring point for fan, light, plug etc all labour work complete , fixing of distribution board of all sizes includingcuttingofbrick work providing lintel of suitable size &thickness plastering etc , fixing of all sizefactory fabricated m.s. box inexisting sunk ofall material, labour and t & p etc. required for proper completion of the work. , fixing of tubelight , fixing of ceiling fan , fixing of exhaust fan , fixing of swith / socket , fixing of wall fan , fixing of e.w.c pan , fixing of 15mm single holebasin mixture , wash basin withfitting &piller tapp all complte. ( 550x400 ) , fixing one urinal with sistern , fixing of two urinal set with sistern , fixing of three urinal with sistern , fixing of granite stone slab table rubbed with all complte. , fixing600x450 beveled mirror. , fixing of8mm dia c.p. / s.s jet with flexible tube. , fixing of jaquar make c.p. brass bottle trap , fixing of toilet paper holder c.p brass , fixing15 mm c.p brass ablution health faucet assembly with 1.2 m long. , fixing of 15 mm c.p brass two way angle valve for ewc. , fixing of 15 mm c.p brass towerail with complte. ( 60x2cm ) , fixing of15 mm c.p soap tray to the wall. , fixing of 15 mm c.p single flow overhead shower . , fixing of kitchen sink. ( 510x1040x200 ) , fixingflexible pipe 32mm , supply & laying water proofing chemical treatmaent on roof...

North Eastern Railways - Uttar Pradesh

37604378 auction sale of all kinds of unserviceable scrap, comprising electrical accessories, domestic electrical appliances, led light, street light, ceiling light, small / big hylogen, tube light fitting, mcb with box, main switch, junction box, electronic chock, all types of capacitor, cfl, led bulb, electrical fittings, switch, socket, fl fitting, power switch / socket, ceilling rose, electronic regulators, relay timer, different types of mcb, lcb with boxes, change over switch, tube light, led tube light, led street light fitting, electronic tv stabiliser, led tube light fittings, d.p. switch, integrated circuit plates, d.p. box, button / angle and pendent holder, train light fitting, birth light, head lighting board, solar pannels, coach pannel board, lighting board, cooler with or without motor, small battery / mobile charger, light battery charger with or without negligible nf attachememnt in different sorts of sizes and in this scrap also includes other known or unknownelectrical items.location: in godown no ? 98 04lbpl, dbaw, gst 18%, tcs 1% , hsn code 72044900, allocation 20714208...

Canara Bank - Uttar Pradesh

37396782 auction sale of property mohd rafique, residential flat at first floor flat no f.f 1, part of property no 122 and 123, rose valley , patel nagar , meerut measuring 79.45 sq mtr standing. for further details refer sale notice....

Indian Army - Uttar Pradesh

37338064 bids are invited for 1 f15120 000319 spanners socket handles sliding bar ‘t’ ¾” sq drive 16” 1316” dia bar 2 f15133 000228 bits braces carpenters countersunk rose 16 00mm dia 3 f15120 002220 spanner socket bihe american & unified ¾ “ sq drive af size american in 1 18 4 f15110 000407 rasp cabinet bastard cut nominal length 300mm 5 f15120 000662 vices bench 100 heavy duty type total quantity : 4230...

University Of Allahabad - Uttar Pradesh

37320985 supply of electricity items for the college. 1 a.c box anchor 2 air circulator wall mounted fan ( 12” ) 600 mm model high breeze crompton 3 air circulator wall mounted fan ( 16” ) 600 mm model high breeze crompton 4 air circulator wall mounted fan ( 18” ) 600 mm model high breeze crompton 5 air circulator wall mounted fan ( 24” ) 600 mm model high breeze crompton 6 battery 80 ah ( exide ) 7 battery 100 ah ( exide ) 8 battery 150 ah ( exide ) 9 battery for u.p.s 7 ah ( exide ) smf 10 battery for u.p.s 42 ah ( exide ) smf 11 battery for u.p.s 65 ah ( exide ) smf 12 brass screw 13 bulb 100 watt 14 bus bar 12”x12” 4 pole 15 bus bar 12”x18” 4 pole 16 button holder ( anchor ) 17 cable 10mm 2 core aluminum 18 cable 16mm 2 core aluminum 19 cable 6mm 2 core aluminum 20 cable 8mm 2 core aluminum 21 cable 2 core 16 mm ( aluminum ) 22 cable 4 core 16 mm ( aluminum ) un armored 23 cable 4 core 25 mm ( aluminum ) un armored 24 cable 4 core 30 mm ( aluminum ) un armored 25 cable 4 core 40 mm ( aluminum ) un armored 26 casing accessories 27 casing clip 28 ceiling fan 1050mm ( 36” ) ( havells ) 50 watt 29 ceiling fan 1200mm ( 48” ) ( havells ) 50 watt 30 ceiling fan 1200mm ( 48” ) ( havells ) 70 watt 31 ceiling fan 1400mm ( 56” ) ( havells ) 70 watt 32 ceiling rose ( anchor ) 33 change over – 100 amp 4 pole ( havells ) 34 change over – 63 amp 2 pole ( havells ) 35 change over – 63 amp 4 pole ( havells ) 36 change over – 32 amp 2 pole ( havells ) 37 change over switch 200 amp mcb type 38 clamp 32 mm. 39 combined with box 15 amp. ( anchor ) 40 combined with box 5 amp. ( anchor ) 41 computer board power strip 6 amp 42 condenser 10 mfd 43 condenser 120 mfd 44 condenser 16 mfd 45 condenser 33 mfd 46 condenser 36 mfd 47 condenser 5 mfd 48 condenser 6 mfd 49 condenser 8 mfd 50 condenser 1.5 mfd 51 condenser 2.5 mfd oil 52 condenser 3.15 mfd oil 53 condenser 4 mfd 54 cooler body 55 cooler fitting accessories 56 cooler pump submersible vansal 57 dp switch 32 amp ( anchor ) 58 electronic regulator – 1000w ( anchor ) 59 electronic regulator – 600w ( anchor ) 60 exhaust fan ( 12” ) 900 rpm ( ( vansal ) 61 exhaust fan ( 15” ) 1400 rpm ( ( vansal ) 62 exhaust fan 450 mm ( 18” ) 1400 rpm ( ( vansal ) 63 exhaust fan 450 mm ( 18” ) 900 rpm ( vansal ) 64 fan box cover 65 fan rod per ft heavy 66 flexible pipe ¾” isi plaza 67 flexible pipe 1” isi plaza 68 fresh air fan 230mm 9” crompton, usha, havells 69 fresh air fan 300mm 9” crompton, usha, havells 70 g.i.wire 8 nos. 71 heater pin 72 indicator ( anchor ) 73 industrial cable aluminum 40mm ( 4core ) armored 74 industrial cable aluminum 50mm ( 4core ) armored 75 industrial cable aluminum 50mm ( 4core ) un armored 76 inverter 1050va ( exide ) 77 inverter 1400va ( exide ) 78 inverter 850va ( exide ) 79 inverter 900va ( exide ) 80 inverter 900va sine wave ( exide ) 81 inverter upseb00 12 v microtek 82 inverter upseb00 24 v microtek 83 invertor battery 150ah ( exide ) tubular 84 invertor battery 180ah ( exide ) tubular 85 invertor battery 200ah ( exide ) tubular 86 isolator 100 amp ( havells ) 2 pole 87 isolator 100 amp ( havells ) 4 pole 88 isolator 32 amp ( havells ) 2 pole 89 isolator 32 amp ( havells ) 4 pole 90 isolator 63 amp ( havells ) 2 pole 91 isolator 63 amp ( havells ) 4 pole 92 junction box cover ( round sheet ) 93 kaju pin 6 mm 94 kaju pin 8 mm 95 kaju pin 10 mm 96 kaju pin 12 mm 97 kit kat 100 amp ( havells ) 98 kit kat 200 amp ( havells ) 99 kit kat 63 amp ( havells ) 100 kit kat fuse 6 amp 101 kit kat fuse 16 amp 102 led bulb 04 watt ( philips ) 103 led bulb 07 watt ( philips ) 104 led bulb 09 watt ( philips ) 105 led bulb 12 watt ( philips ) 106 led bulb 14 watt ( philips ) 107 led bulb 20 watt ( philips ) 108 led bulb 23 watt ( philips ) 109 led bulb 30 watt ( philips ) 110 led bulb 40 watt ( philips ) 111 led bulb 45 watt ( philips ) 112 led fancy fitting medium 113 led fancy fitting ordinary 114 led fancy fitting superior 115 led flood light 15 watt oreva 116 led flood light 20 watt oreva 117 led flood light 30 watt oreva 118 led flood light 50 watt oreva 119 led flood light 70 watt oreva 120 led flood light 100 watt oreva 121 led flood light 125 watt oreva 122 led flood light 150 watt oreva 123 led flood light 200 watt oreva 124 led flood light 250 watt oreva 125 led flood light 500 watt oreva 126 led street light 18 watt ( oreva ) 127 led street light 24 watt ( oreva ) 128 led street light 30 watt ( oreva ) 129 led street light 45 watt ( oreva ) 130 led street light 55 watt ( oreva ) 131 led street light 70 watt ( oreva ) 132 led street light 90 watt ( oreva ) 133 led street light 110 watt ( oreva ) 134 led street light 130 watt ( oreva ) 135 led street light 150 watt ( oreva ) 136 machine screw 137 main switch – 100 amp. ( havells ) 2 pole 138 main switch – 100 amp. ( havells ) 4 pole 139 main switch – 200 amp. ( havells ) 2 pole 140 main switch – 200 amp. ( havells ) 4 pole 141 main switch – 32 amp. ( havells ) 2 pole 142 main switch – 32 amp. ( havells ) 4 pole 143 main switch – 63 amp. ( havells ) 2 pole 144 main switch – 63 amp. ( havells ) 4 pole 145 mcb 6 amp. to 32 amp. ( havells ) 146 mcb 40 amp. ( havells ) 147 mcb 63 amp. ( havells ) 148 mcb box 2 way 149 mcb box 4 way 150 mcb box 6 way 151 mcb box 12 way 152 mcb box 24 way 153 mcb box 36 way 154 metal board 7x4 155 metal board 10x12 156 metal board 4x4 157 metal board 6x8 158 metal board 8x10 159 metal pipe ¾” isi plaza 160 metal pipe 1” isi plaza 161 multi standard wire 10 mm ( havells ) 162 multi strand wire 1.00mm ( havells ) 163 multi strand wire 0.75mm ( havells ) 164 multi strand wire 1.50mm ( havells ) 165 multi strand wire 2.5mm ( havells ) 166 multi strand wire 4.00mm ( havells ) 167 multi strand wire 6.00mm ( havells ) 168 neutral link 10 way 169 nut bolt 3 “ 170 nylon plug 171 p.v.c. pipe ¾” isi plaza 172 pedestal fan 400 mm 16” crompton 173 pendent holder ( anchor ) 174 plug top 2 pin ( anchor ) 175 plug top 3 pin ( anchor ) 16 amp. 176 plug top 3 pin ( anchor ) 6 amp. 177 pvc casing ¾” 178 pvc casing 1” 179 pvc casing 2” 180 square box 181 pvc junction box ¾” isi plaza 182 pvc junction box 1” isi plaza 183 pvc long band ¾”isi plaza 184 pvc long band 1”isi plaza 185 pvc pipe 1” isi plaza 186 pvc tape steel grip 187 saddle ¾” 188 saddle 1” 189 side holder tube light 190 socket 16 amp anchor 191 socket 6 amp anchor 192 speed regulator for air circulator 24” 2800 rpm transformer type 193 stage d.j. light multi colour single pcs. 194 stand for cooler body 195 starter for submersible pump 1 h.p ( crompton ) 196 starter for submersible pump 2 h.p ( crompton ) 197 starter holder 198 star screw black 199 submersible pump 1 h.p. / 10 water stage ( crompton ) 200 submersible pump 2 h.p. / 10 water stage ( crompton ) 201 submersible wire 1.5 mm. 3 core 202 submersible wire 2.50 mm. 3 core 203 sunmica sheet rate per sq in. 204 supporting wire 205 surface fitting 1x2 ft with led 206 surface fitting 2x2 ft with led 207 surface round fitting ( down light ) 208 switch 16 amp anchor 209 switch 6 amp anchor 210 symphony cooler storm 100 i 211 symphony cooler storm 70 t 212 teak ( sagoon ) board 6x8 213 teak ( sagoon ) board 7x4 214 teak ( sagoon ) board 10x12 215 teak ( sagoon ) board 4x4 216 teak ( sagoon ) board 8x10 217 thermal scanner microtek 218 tpn – 32 amp. 219 tube light fitting led 18 watt ( philips ) 220 tube light fitting led 22 watt ( philips ) 221 tube light fitting single ( philips ) 222 tube light starter ( philips ) 223 tube rod 36 watt ( philips ) 224 tube rod choke 40 watt ( philips ) electronic 225 wall fan 300 mm crompton 226 wall fan 400 mm crompton 227 wall mounted fan 450 mm ( 18” ) model high flo crompton 228 water pump lifting ½ hp crompton 229 water pump lifting 1 hp crompton 230 wire 23 / 76 2 core copper 231 wire 3 core copper 23 / 76 round flexible 232 wire 3 core copper 40 / 76 round flexible 233 wire 40 / 76 2 core copper 234 flat wire 235 wire 3 core copper 2.50 mm 236 cable lug 237 kaju pin 20 mm 238 kaju pin 25 mm 239 rotory 63 amp 240 rotory 100 amp 241 rotory 200 amp 242 rotory box 243 hanging light led 244 fan hook 245 fastner 12 nos...

Uttar Pradesh Jal Nigam - Uttar Pradesh

37275262 tender for invitation of rates for supply of rates for civil, electrical, sanitary and other materials for ggic shahabad, distt hardoi 1 cement ( opc / ppc ) 2 coarse sand 3 fine sand 4 brick m 150 5 tor steel 8mm dia 6 tor steel 10 mm dia 7 tor steel 12mm dia 8 tor steel 16mm dia 9 binding wire 10 stone grit 10 20mm 11 stone ballast 12 white cement 13 brick bats 14 vitrified tiles ( 600x600 ) 15 floor tiles ( 300x300 ) @.8sqm 16 wall tiles ( 300x450 ) mm 17 kota stone 25mm thick 18 granite 19 flush door ( single leaf 32mm ) 20 flush door ( double leaf 32mm ) 21 angle iron ( 40x40x5 ) 22 10mm square bar 23 z section ( f4 & f7 ) 24 hold fast 25 sliding bolt ( 250x16 ) 26 tower bolt ( 250x10 ) 27 ms handle 125mm 28 door stopper 29 obd paint ( 20 lt ) 30 exterior paint ( 20 lt ) 31 enamel paint ( black ) 20 lt 32 putty ( 40 kg ) 33 red oxide ( 20 lt ) 34 glass panes 4mm thick 35 glass strip 36 ss railing 37 chequred tile 38 collapsile shutter 39 mosquito proof jali 40 wc pan ( orissa pan ) 580x440 41 european sheet with cover & zed 42 l.l. cistern ( 10 lt ) 43 wash basin ( 550x440 ) 44 pillar cock 15mm 45 kitchen sink ( 1050x510x250 ) 46 pvc waste pipe 32mm 47 pvc waste pipe 40mm 48 beveled mirror ( 600x450 ) 49 urinal ( 580x380x350 ) 50 pvc connection pipe 15mm 51 cp brass bib cock 15mm 52 cp brass long body 15mm 53 cp brass angle valve 15mm 54 cp brass shower 15mm 55 cp brass stop cock 56 pvc pipe 90mm ( 3inch ) 57 pvc elbow 90mm 58 pvc socket 90mm 59 pvc tee 90mm 60 pvc pipe 110mm ( 4 inch ) 61 pvc elbow 110mm 62 pvc socket 110mm 63 pvc tee 110mm 64 pvc pipe 160mm ( 6 inch ) pipe 65 pvc elbow 160mm 66 pvc socket 160mm 67 pvc tee 160mm 68 cpvc 20mm pipe 69 cpvc bend 20mm 70 cpvc tee 20mm 71 cpvc socket 20mm 72 cpvc 25 pipe 73 cpvc elbow 25mm 74 cpvc tee 25mm 75 cpvc socket 25mm 76 pvc solvent 77 cpvc solvent ( 100gm ) 78 water storage tank 79 tank nipple 25mm 80 tank nipple 20mm 81 ball valve 25mm 82 gate valve 20mm 83 gate valve 25mm 84 union 25mm 85 union 20mm 86 cp brass towel rail 87 nahni trap 88 pvc p trappe 89 cp west coupling 40mm 90 cp jali 91 ms clamp 110mm 92 moduler ms box ( 3x3 ) with sheet 93 moduler ms box ( 4x4 ) with sheet 94 moduler ms box ( 5x3 ) with sheet 95 moduler ms box ( 8x3 ) with sheet 96 moduler ms box ( 9x3 ) with sheet 97 moduler ms box ( 5x5 ) with sheet 98 moduler ms box ( 8x6 ) with sheet 99 moduler ms box ( 8x8 ) with sheet 100 switch 6amp 101 socket 6amp 102 switch 16amp 103 socket 16amp 104 ceiling fan 1200mm ( havells, bajaj etc. ) 105 fan regulator 106 exhaust fan 300mm 107 led tube 20w 108 distribution board 12way 109 isolator 40amp 4p 110 isolator 63amp 4p 111 mcb 6 32amp sp 112 copper wire 0.75sqm 113 copper wire 1.00sqm 114 copper wire 1.50sqm 115 copper wire 2.50sqm 116 copper wire 4.00sqm 117 copper cable 10mm 3 fase 04 core 118 conduit pipe 25mm 119 surface junction 25mm 120 pvc bend 25mm 121 pvc saddle 25mm 122 holder 123 led bulb 9 w 124 ceiling rose 125 fan sheet 126 round sheet 127 china screw 1 inch 128 screw 1.5 inch 129 machnery screw 1 inch 130 machnery screw 1 .5 inch 131 flixble pipe 132 cut out 63 amp 133 royal plug ( 100 pcs ) 134 royal screw 1 inch 135 tape roll 136 electric pannle 137 fire fighting cylinder 9ltr co2 138 street light 40 watt 139 tubular pole 7mtr 140 excavation in foundations in ordinary soil 141 filling of carted earth 142 sand filling in plinth 143 laying cement concrete 1:4:8 144 l / c for r.c.c. work in the proportion of 1:1.5:3 ( m 20 ) in slab including necessary centering and shuttering etc.and also including , labour and tools and plants etc, required for proper completion of the works. binding wire cost being inluded in the item. 145 same above item but for beam 146 same above item but for collumn 147 brick work in super structure above plinth level up to floor two level ( up to two storeys ) 148 same as in item no. 10 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 149 laying brick coba work 150 fixing isi marked flush door shutters 151 hold fast for chaukhats of doors / windows. 152 door / windows & staircase grill. 153 z section windows ( openable ) 154 angle iron door chaukhat 40*40*5 155 fixing fly proof galvanized m.s. wire gauge to windows 156 labour for mild steel or iron in plain work such as reinforced concrete 157 fixing of door, windows / ventilators chaukhats in position. 158 12 mm cement plaster including necessary centering and shuttering etc 159 12 mm cement plaster including necessary centering and shuttering etc 160 forming groove of uniform size 12x12 mm and upto 25x25 mm in plastered surface as per approved pattern using wooden battens nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing of groove complete as per specification and direction of the engineer in charge. 161 making drip coarse 162 fixing of glazed tile 163 l / c cement concrete flooring 1:2:4 ( 40mm thick ) 164 l / c cement concrete flooring 1:2:4 ( 25mm thick floor ) 165 l / c for fixing of vitrified tile 166 l / c for fixing of 25 mm thick kota stone with polish 167 l / c for fixing of granite 168 l / c for painting two coat over priming coat 169 l / c for same as above but wooden painting. 170 finishing wall with water proofing cement paint two coat. 171 l / c for distempering ( two coat ) 172 l / c for applying putty 173 l / c for fixing of glass pan 174 l / c making drain along apron 175 p / f aluminiam sheet for bathroom door 176 fixing of chequerred tile 177 cinder filling 178 making & fixing ss railing 179 fixing of collapsible shutters 180 chase cutting in brick work or r.c.c work & fixing of pvc conduct pipe repared all surface. 181 l / c wiring point for fan, light, plug etc all labour work complete 182 fixing of distribution board of all sizes including cutting of brick work providing lintel of suitable size &thickness plastering etc 183 fixing of all size factory fabricated m.s. box in existing sunk of all material, labour and t & p etc. required for proper completion of the work. 184 fixing of tubelight 185 fixing of ceiling fan 186 fixing of exhaust fan 187 fixing of swith / socket 188 fixing of w.c pan with all lbour & t&p 189 fixing of e.w.c pan with all lbour & t&p 190 fixing of wash basin, including cutting and making good the walls wherever require : 191 fixing of urinal , including cutting and making good the walls wherever require : 192 fixing of white vitereous china laboratory sink with including cutting and making good the wall walls wherever required : 193 fixing of flexible p.v.c. waste pipe for sink, wash basin & urinal basin 194 fixing / laying of pvc pipe 90mm including all fitting etc labour work complete 195 fixing / laying of pvc pipe 110 including all fitting etc labour work complete 196 fixing pvc p traps including cost of cutting & making good the walls & floors. 197 fixing of stainless steel jali ( grating ) 198 fixing / laying of cpvc pipe 20mm including all fitting etc labour work complete 199 fixing / laying of cpvc pipe 25mm including all fitting etc labour work complete 200 fixing isi marked cp brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. a ) short body bib cock 201 fixing isi marked cp brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. b ) long body bib cock 202 fixing isi marked c.p. brass angle valve 15 mm with flange of approved quality including threading the pipe etc. for completion of work. a ) 15 mm nominal bore 203 fixing 45 cm long unplasticised pvc connection pipe with brass unions. a ) 15 mm nominal bore 204 fixing / laying of rain water pvc pipe 110 including all fitting etc labour work complete 205 e / w in trenches 206 providing, laying p.c.c 1:4:8 207 fixing / laying of pvc pipe 160mm including all fitting etc labour work complete 208 placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes 209 earthwork in excavation in foundation lift upto 1.5m and disposal of surplus excavation soil as directed with in a lead of 50 mts. 210 laying of cement concrete 1:4:8 211 brick work foundation and plinth in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) 212 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings. balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size. ) 213 ms work 214 12mm cement plaster 215 cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate ) 216 making soak pit 2.5 m diameter 3.0 m deep ith 45x45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standerd design 217 drilling of 200 mm dia bore hole. 218 supply of 160mm dia 8kg / cm2 p v c pipe 219 supply of 160 mm dia 8 kg / cm2 slotted pvc pipe 220 lowering of 160 mm dia pvc pipe 221 supply and fixing of nylon jali around the slotted pipes complete as required 222 providing and packing of coarse sand / pea gravel around the pipe. 223 transport of boring tools other required equipements and installation at site. 224 supply of submersible pump of make ksb ( cora ) for 200 lit / min discharge at 35 meter head with control panel, support wire etc complete. 225 providing 3 core pvc insulated submersible cable. ( from pump panel to submersible pump ) 226 providing and fixing 65 mm dia. g.i. pipe complete with fittings and clamps including cutting and making good the wall etc. ( from submersible pump to ground level ) 227 providing and fixing65 mm dia. brass gate valve with ci wheel of approved quality. 228 supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respect. 229 fixing, testing and commissioning for erection and lowering of submersible pump, 65mm dia gi column pipe, 3 core submersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the work. 230 testing and development of tube well....

Military Engineer Services - Uttar Pradesh

37274499 welcome maintenance and other misc works under age b / r ii of ge ( i ) kanpur. 1 demolition of cement concrete ( un reinforced ) of any description in ground floors and paving not exceeding 15 cm thick ( below or above the ground level ) . 2 m & l for preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coats of white wash, complete all as specified and directed. 3 m / l for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white washing on wall complete all as specified and as directed. 4 m / l for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of colour washing on wall complete all as specified and as directed. 5 m & l for preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint of approved shade, complete all as specified. 6 m&l preparation of old steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint ( of approved shade ) complete all as specified. 7 m&l preparation of new steel or iron surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint ( of approved shade ) ovre a coat of zink oxide primercomplete all as specified. 8 m&l for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling / edging the disturbed places / edges using necessary filling of wall care putty to obtain smooth regular / even finish using sand paper and applying one coats of oil bound distemper ( of approved shade ) with the help of machine, complete all as specified and directed.make of wall putty: birla / jk / kamdhenu 9 m & l complete removal of existing treatment and and applying two coat of oil bond distemper over 1 mm thick wall care putty with the help of machine, complete all as specified and directed.make of wall care putty jk / birla 10 cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 250 litre to 500 litre capacity pvc water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distanceof not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powdersolution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘date of cleaning the tank ’, completeall as directed by engineer in charge. 11 all as per srl item no 10 here in before but capacity of tank 501 to 1000 litres 12 m &. l for cutting chases for concealed water tubing and making good in cm ( 1:3 ) , cutting not exc 10 cm girth in brick wall complete all as specified and directed 13 s&f in repair hdpe triple layer rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) 500 litres capacity ( white colour ) hoisted and fixed in position all as specified in ssr pt i including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etcincluding gi nipple of suitable size including supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. make: sintex / dhara / tuff / js polyplastas approved by ge ( i ) . 14 s&f hdpe triple layer rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) 1000 litres capacity ( white colour ) hoisted and fixed in position all as specified in ssr pt i including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etcincluding gi nipple of suitable size including supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. make: sintex / dhara / tuff / js polyplastas approved by ge ( i ) . 15 s&f in repair tubular towel rail 20mm dia d type 60cm long between flanges brass cp complete all as specifie.make : cat no aec 1111n of jaquar 16 s & f in repair gi tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified. 17 s & f in repairm & l for gi tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified. 18 all as per srl item no 16 above but exceptpipe complete all as specified and directed. 19 all as per srl item no 17 above but exceptpipe complete all as specified and directed. 20 s & f in repair stop valves, 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe, complete all as specified. 21 s & f in repair 20mm ball valves high pressure ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified.make : prayag, commander, prince, pearl 22 taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc. 23 m & l for rendering 15 mm thick cement plaster in cement mortar ( 1:6 ) on fair faces of brick works or concrete surfaces , finished even and smooth w / o using extra cement . 24 m & l for rendering 15 mm thick in two coats.first coat 10 mm thick in cm ( 1:6 ) & top layer 5 mm thick in cm ( 1:4 ) with mixing integral water proofing compound as per manufacturers instruction & finished even & smooth without using extra cement complete all as specified.note : supply only water proofing compound shall be measured and paid separately. 25 m & l for rendering 10 mm thick cement plaster in cement mortar ( 1:3 ) on rcc ceiling , finished even and smooth w / o using extra cement. 26 supply only water proofing compound complete all as specified and directed. 27 m&l, applying two coats of distemper oil emulsion over a coat of primer on new surfaces including preparation of new surfaces, finished even and smooth using chalh whiting / jk wall putty complete all as specified and directed by engg in charge. 28 m & l applying three coats of white wash on celingincluding preparation of new surfaces, complete all as specified. 29 m & l for preparation of new plaster surface and applying one coat primer and two coat of colour washon walls , complete all as specified. 30 s& f in repair 15 mm bore central hole basin mixture , chromium plated, without popup waste system with 450mm longbbraided hoses pipecomplete all as directed.make : cat no orb 105011b of jaquar 31 s & f in repair 15 mm borewall mixture with 3 in 1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipeconnecting legs & wall flanges complete all as specified .orb 105149 of jaquar 32 s&f in repair mirror cabinet size 33x43cm ( ptmt alloy etc complete all as specified ) . 33 s&f in repair ss hand health faucet for water closet , pedastal pattern fixed in repairmake : cat no ald 587of jaquar 34 s&f in repair 80 mm dia shower rose, brass , chromium plated with swivel joint complete fixed in repair.make : cat no eos 1985 of jaquar or equveilent 35 s&f in repair looking mirror 6.00mm screwing with high quality screw ( complete all as specified. ) 36 s&f in repair, oval counter type vitreous china wash hand basin of size 53x44x20 cms, whiteincluding waste coupling of32 mm.complete all as specified and directed by engineer in chargemake : cat no ecs wht 601 of jaquar . 37 s & f in repair for cascade type china ware closet pedastal pattern of superior special colour including fixing bolts, fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and make: ais wht 101851522osppsm jaquare, as approved by ge ( i ) 38 s&fin repair full glass shelf, chromium plated , complete all as directed engineer in charge. 39 s&f toilet paper holder , chromium plated , fixed in repair, complete all as directed. make : cat no aec 1151n of jaquar or equveilent 40 s&f towel shelf, chromium plated , fixed in repair, complete all as directed. make : cat no aec 1181na of jaquar or equveilent 41 s&fin repair towel ring , chromium plated , complete all as directed by engineer in charge. cat no aec 1121n of jaquar 42 s&fin repair tumbler holder , chromium plated , complete all as directed by engineer in charge.cat no aec 1141n of jaquar 43 s&f soap dish , chromium plated , complete all as directed.make : cat no can 1131n of jaquar or equveilent 44 s&fin repair full corner shelf, chromium platedcomplete all as directed engineer in charge.cat no can 1173 of jaquar 45 s&f, 15mm bip taps, cast copper alloy ( chromium plated ) with crutch handle or butter fly handle screwed down , screwed for iron pipe and fixed in repair.make : cat no cop 037pm of jaquar or equveilent 46 s & f in repair 15mm angle valves cast copper alloy , cast copper alloy , chromium plated , screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .make : cat no cos 103037 of jaquar or equveilent 47 s&f in repair conceeled stop cock, 15 mm bore, cast copper alloy , chromium plated , screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .cat no mqt 514ekn of jaquar 48 s& f in repair cp sink mixture with swinging casted round shape spout ( wall mounted model ) with connecting legs &wall flanges.cat no mqt 514ekn of jaquar 49 s & f in repair cp two way bib cock withwall flange.make:jaquare, parryware & hindware as approved by ge ( i ) cat nocos 103067 of jaquar 50 s&fin repair15 mm borewall mixture withoverhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges complete all as specified. make : cat no qqp 7273pmof jaquar or equveilent 51 supplied and fixed in repair vitreous china whb white flat back size 565x450x195mm including supplied and fixed angle iron brackets, including padestal cat no cns wht 303, cns wht 811 complete all as specified & directed.make:jaquare, parryware & hindware as approved by ge ( i ) 52 s & f in repair15 mm pillar taps, cast copperalloy , with capstan heads, chromium plated , screwed down high pressure , with or without lettered hot or cold with long screwed shanks and fly nuts , screwed for iron pipe and fixed.make:jaquarecat no mqt 507kn 53 s& f in repair for vitreous china squatting pan orissa pattern size 580x440mm white with integral footrest ( exclusive flusing cistern& flush pipe ) fixed in repairs including cast iron p or s trap of 100 mm bore pipe fixed in pcc 1:2:4 type b 2 complete all as specified.make:jaquare, parryware & hindware as approved by ge ( i ) 54 m & l for 50 mm thick, plain cement concrete 1:3:6, type c 1, using 20 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling ( to full depth ) comprising of one part heated hot blown bitumen 85 / 25 & two parts heated sand ( by volume ) , surface finished even and smooth without using extra cement, complete all as specified.note: the concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. 55 dismentling floors, hearth or wall tilingincluding cement morter bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed . 56 m&l vitrified tiles , light shade, 10 mm thick ( square / rectangular ) polished , area of each tile not exceeding 0.36 sqm , laid in floors over 15 mm thickscreed bed in cement mortar 1:6, including pointing in white or coloured cementto match the shadeof tiles, complete all as specified and directed.make:kajaria / johnson / somany / bell / orient 57 all as per srl item no 56 above but as in skirting, dados, laid over 10 mm thick rendering of cm ( 1:4 ) and ditto . 58 m & l for first quality , non skid coloured ceramic tiles 7to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, laid in floorsover 15 mm thickscreed bed in cement mortar 1:6, including pointing in white cement with pigment to match the shadeof tiles, complete all as specified and directed.make:kajaria / johnson / somany / bell / orient 59 m & l for first quality glazed ceramic coloured tiles of size ( 450x300mm ) x7 mm thick, laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in cm ( 1:4 ) set in cement to match the shade of tiles complete all as specified and directed by engr in charge. 60 m&l 18 20mm thick granite ( of any type ) work ( table rubbed and polished ) in cooking flatforms and like in cm 1:4 including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite. 61 labour only for making rounding to edges of granite slab in cooking platform inclduding necessary required tools and machinerycomplete all as specified and directed. 62 s&f in repair 10 ltr capacity pvc valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long pvc connection and connection to trap, and to flushing and making good to floor complete all as specified . 63 s&f in repairs vitreous china wash down water closet pan pedestal pattern ( ewc ) including p or s trap, plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed by eic. 64 s&f in repair plastic water closet seat cover white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device fixing in repair ( make parry ware and equivalent ) 65 s&fstainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm withincluding waste coupling, waste pipe complete all as specified and directed ( make nirali, blue star or equivalent ) 66 s&f in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling. 67 s&fin repair low density polyethylene pipes ( ldpe ) of pressure rating 6kgf / sqm cm32 mm bore complete all as specified and directed. 68 s&f in repairball and catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 69 s&f 40mm width continuos ( piano ) hinges, brass complete all as specified and directed. 70 s & f in repair 20 mm thick pvc board made out of 18 mm thick pvc ply and 1 mm thick pvc ply free from rigid one side prelaminated and one side palin colour, pvc sheet stuck on both side with solvent cement adhesive to make the board of 20 mm thick for cub board & wardrobe . 71 s&f in repair 40mm dia, brass polished cupboards knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. 72 taking down chowkhats or frames n. exc 1.5 sqm each with shutters ( without taking of shutters from the frames ) . 73 taking down chowkhats or framesexc 1.5 sqm but n exc 4 sqm each with shutters ( without taking of shutters from the frames ) . 74 s&f, mild steel 300mm, ordinary rat tail door spring etc complete all as specified. 75 s&f galvanished mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with tinned tacks, galvanised wire staples, complete all; as specified and directed by e i c. 76 s&f as in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples 77 s&f, aluminium anodised barrel tower bolts, 150mm long , of extruded section and fixed . 78 s&f, aluminium alloy anodised slidingdoor bolts , 16 mm diaof 250 mm long with hasp, staple ( bolt type ) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed. 79 s&f stainless steel butt hinges medium weight cold rolled of 100 mm size and fixed complete all as specified and directed. 80 s&f, aluminium handles , 150 mm size, cast type complete all as specified and directed. 81 s&f, repair fency type stain less steel curtain rods of 25 mm dia , as in doors / windows pelmets including ss brackets and ss funnels. 82 s&f framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to fe 290 gde e 165 complete all as specified and directed. 83 hacking out old brocken glass of any thickness , size and description n exc 0.50 sqm in each pan matal frame glazing with oil putty or fixed with beadings etc. 84 s &f figured glass, pin head type and glazing with oil putty in squares n exc 1.0 sq.m. in each pane complete all as specified and directed. 85 s&f, 3 mm thick sheet glass , ordinary quality with oil putty in square n exc 1.0 sqm in each pan complete all as specified and directed. 86 s&f. pvc connection 15 mm size with ptmt nuts of length 600 mm complete all as specified and directed. 87 dismantling of asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and as directed. 88 m&lpre painted galvalume aluminium zinc coating gi basedcorrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550 mpa as in roof covering / clading to wall fixed with screws complete all as specified and as directed. 89 m & l for pre painted galvatume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. 90 dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 91 m&l joist channel, angle, or tee section sections, fixed independently, without conctecting , plates, etc cut to ordinary lenths i.e within 20mm of the length indicated ) complete all as specified and as directed 92 supply & fixing of armstrong mineral fibre acoustical suspended ceiling system with dune ( micro look ) edge tiles with armstrong xl 15 mm exposed steel angle. the tiles should have humidity resistance ( rh ) of 99%, nrc upto 0.5, light reflectance >85%, thermal conductivity k = 0.052 0.057 w / m k, colour white, fire performance class 0 / class1 ( bs 476 part 6&7 ) in module size of 600 x 600 x 16 mm with bio block coating on the face of the tile, suitable for green building application, with recycled content of 38 41%.the steel angle should be of “armstrong” make with 15mm wide t section flanges colour white having rotary stitching on all t sections i.e. the main runner, 1200 mm & 600 mm cross tees with a web height of 32, 27 and 27mm and a load carrying capacity of 7.5 kgs / sqm. the t sections have a galvanizing of 90 grams per sqm & passed through 500 hrs of salt test , perimeter trim to be armstrong wall angles of size 30x19x19mm, secured to walls at 450 mm maximum centre to centre hanging with 4 mm gi wire copmlete all as specified and directed according to manufacturers instruction and complete including taking down od false ceiling all as specified and as directed. 93 s& f in repair for aluminium body door closer hydraulically regulated, designation no. 2 , universal type , suitable for door shutters 701 to 850 mm in width and ofweight between 36 to 60 kg and fixed 94 s&f in repairsstainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets / clamps with screws pattern & design as approved by ge complete all as specified and directed.note: nirali / blue star / prayag / neelkanth as approved by ge ( i ) . 95 s&f factory made single extruded wpc ( wood polymer composite ) solid door / window / ceosetory windows & other frames / chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58 60 ( suspension grade ) , calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg / cum, screw withdrawal strength of 2200 n ( face ) & 1100 n ( edge ) , minimum comp ressive strength of 58 n / mm2 , modules of elasticity 900 n / mm2 and resistance to spread of flame of class a category with property of being termite / borer proof, water / moisture proof and fire radiantand fixed in position with ms hold fast / lugs / ss dash fasteners of required dia and length complete as per direction of engineer in charge. ( m.s. hold fast / lugs or ss dash fasteners shall be paid for separately ) . ? note: for wpc solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be 96 s&f factory made single extruded wpc ( wood polymer composite ) solid plain flush door shutter of 30mm size comprising of virgin polymer of k value 58 60 ( suspension grade ) , calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg / cum and screw withdrawal strength of 1800 n ( face ) & 900 n ( edge ) , minimum compressive strength 50 n / mm2 , modulus of elasticity 850 n / mm2 and resistance to spread of flame of class a category with property of being termite / borer proof, water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer in charge. ( note: stainless steel butt hinges and necessary s s screws shall be paid separately ) 97 s / f factory made solid pvcprofile panel door shutter 28mm thick with integral skin as frame with c type gi or 40x20x19 of ms pipe as stiffner& supplying &fixing in frame at site asper specification & drawing but wire gauzed i.e. panel will be of wire gauze in lieu of pvc sheet panel. the wire gauze shall be wrapped on an additional square 8mm m.s. solid tube and this tube shall be welded to m.s. tubes. the wire gauge shall be stretched to tighten firmely. 98 providing and fixing factory made upvc white color sliding window two track made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm ) . window profile with hollow section with multi chamber, frame ( 60mm x 62mm ) . sash ( 42mm x 67mm ) . sliding interlock ( one vertical length in each shutters ) ( 45.5mm x 28mm ) . glazing bead ( 24.5mmx 16mm ) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. epdm gasket 1.2 + 0.2mm thick galvanized steel frame ( 30mm x 21.5mm ) , sash ( 30mm x 18mm ) , profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. hardware : [ touch lock of zinc alloyed ( white powder coated ) , steel roller system including5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for sliding sash and interlock. ] ( note: the unit rate quoted by contractor included 5.00 mmcost of glass / wiremesh and includes all other connected accessories. net opening will be measured for payment purpose 99 providing and fixing factory made upvg white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm ) . window profile with hollow section with multi chamber. frame ( 88mm x 52mm ) , sliding sash ( 42mm x 67mm ) . sliding mesh sash ( 42mm x 57mm ) sliding interlock ( onevertical length in each shutters ) ( 45.5mm x 28mm ) , glazing bead ( 24.5mm x 16mm ) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. epdm gasket, 1.2+ 0.2mm thick galvanised steel frame ( 30mm x 18mm ) 2 nos, sliding sash ( 30mm x 18mm ) , sliding mesh sash ( 26mm x 10mm ) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware [ touch lock of zinc alloyed ( white powder coated ) , steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. ( note: the unit rate quoted by contractor included 5.00 mm cost of glass / wiremesh and includes all other connected accessories. net opening will be measured forpayment purpose. net opening will be measured forpayment purpose. 100 m&l for rigid pvc foam profiles ventilator. horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with ms pipe stiffener ( 19x19x0.8mm thk ) vertical frame member with help of required size csk screw and adhesive. total unit is fixed with help of bracket / fasteners including 4 mm thick frosted glass and ss jalli as per requirement. 101 m&l for easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed....

Military Engineer Services - Uttar Pradesh

37273817 comprehensive maint / petty repair of internal electrical services at cod inside under ge ( i ) kanpur. 1 attending complaints fo checking and replaceing the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc. attending minor repair ( s ) such as testing, connectins, fittings, nut, bolts, screws etc toemergent complaints i.e no light, earth leakage, short circuit, neutral break in mains / sub mains / internal circuits of existing electical system of main building / block and making continuous electric supply including carrying out minor repairs etc.. required to make the system in order / *functional with insualtion tape roll, copper thimbles, glands, earthing wire as required at site and complete all as specified and directed . notes : this item is applicable only where no store is required. 1. the site for attending complaints at cod inside and as directed by engr in charge.contractor shall provide minimum one tradesmen ( electrician ) and helper for each site to attend the complaint in all working days between 0830 hrs to 1700 hrs including holiday and sunday. 2. contractor shall ensure the security passess for his staff, to be obtained from concern authority for attending complaints. 3.the contractor will ensure that theelecticians with necessary tools bag shall always remain present at complaint cell to attend the complaints.4. a recovery of rs 500 / for not attending the complaint upto 04 hours and after 04 hours rs 1000 / shall be recovered from the contractor due5. all the complaint slip, register & other connected document will be provided by the contractor without any extra cost.6.proper record ( date wise ) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each rar / bill.7. the above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as s&f here in after. 2 supply and fix in replacement cable pvc insulated unsheathed with flexible multistranded copper conductor of size 0.75 sqmm. complete all as specified and directed. make: havells / polycab / plaza 3 all as per item no 2 above but size 1.5 sqmm and.complete all as specified and directed. make: havells / polycab / anchor 4 all as per item no 2 above but size 2.5 sqmm and complete all as specified and directed. make: havells / polycab / anchor 5 all as per item no 2 above but size 4 sqmm. and complete all as specified and directed. make: havells / polycab / anchor 6 all as per item no 2 above but size 6 sqmm and complete all as specified and directed.make: havells / polycab / anchor 7 all as per item no 2 above but size 10 sqmm and complete all as specified and directed. make: havells / polycab / anchor 8 m&l in repair for switch piano flush button single pole one way 5 amps 240 volts and complete all as specified and directed. make: ssk / anchor / havells 9 m&l in repair forswitch piano flush button single pole one way 15 amps 230 volts and complete all as specified and directed. make: ssk / anchor / havells 10 m&l in repair for socket 5 amps 5 pin flush type, 230 volts and complete all as specified and directed. make: ssk / anchor / havells 11 m&l in repair for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts and complete all as specified and directed. make: ssk / anchor / havells 12 m&l in repair for bell push flush button single pole one way 5 amps 240 volts and complete all as specified and directed.make: ssk / anchor / havells 13 m&l in repair for electricbellheavy dutyding dong / buzzer type ac 230 volts single pole and complete all as specified and directed. make: ssk / anchor / havells 14 m&l in repair for switch modular type single pole one way 1 module 6 amps 240 volts and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 15 m&l in repair for switch modular type one way 1 module 16 amps 230 volts and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 16 m&l in repair for socket 6 amps modular type 2 / 3 pin combined 2 module , 230 volts as per sample and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 17 m&l in repair for socket modular type , 2 / 3 pin, 6 and 16 amps combined 2 module, 230 volts.as per sample.and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 18 m&l in repair formodular white cover plate with frame 2 / 3 module a as per sample and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 19 m&l in repair for modular white cover plate with frame 4 module all as specified and directed as per sample. make: anchor / havells ( crabtree ) / indoasian 20 m&l in repair for modular white cover plate with frame 6 module all as specified and directed as per sample. make: anchor / havells ( crabtree ) / indoasian 21 m&l in repair for modular white cover plate with frame 8 module all as specified and directed as per sample. make: anchor / havells ( crabtree ) / indoasian 22 m&l in repair formodular white cover plate with frame 12 module all as specified and directed.as per sample. make: anchor / havells ( crabtree ) / indoasian 23 m&l in repair for ceiling rose surface bakelite 3 terminals and complete all as specified and directed. make: ssk / anchor / havells 24 m&l in repair forlamp holder insulated body with back plate for dome batten fittings and complete all as specified and directed.make: ssk / anchor / havells 25 m&l in repair forfan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically and complete all as specified and directed. make: ssk / anchor / havells 26 m&l in repair formodular regulator as per sample and complete all as specified and directed. make: anchor / havells ( crabtree ) / indoasian 27 supply and fixing in replacement plug top 3 pin 16 amps ac 240 voltsand complete all as specified and directed. make: ssk / anchor / havells 28 supply and fixing in replacement plug top 3 pin 6 amps ac 240 voltsand complete all as specified and directed. make: ssk / anchor / havells 29 supply & fix in replacement hylemsheet cover 3 mm thick of size 7x4 all as required at site including drilling holes for fixing screws and providing 4 nos screws with washers for fixing the sheet to sunken box / wooden box and complete all as specified and directed . 30 all as per item no 29 above but of size 8x10 and complete all as specified and directed . 31 all as per item no 29 above but of size 11x9 and complete all as specified and directed . 32 all as per item no 29 above but of size 13x11and complete all as specified and directed . 33 s&f in repair sunken box size7x4 and making good disturbed surface to match with the existing surface ofwallby applying putty and applying colour / white wash finish and complete all as specified and directed. 34 s&f in repair sunken box size 8x10 and making good disturbed surface to match with the existing surface ofwallby applying putty and applying colour / white wash finish complete all as specified and directed. 35 s&f in repair led alumimium housing batten luminaire surface mounted, 4 feet system wattage of 20 / 22 watts with lifetime ofnot less than 50000 burning hours with 70% of its initial lumen maintained and including connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixe complete all as pecified and directed by engr in charge. note: all the above mentioned specifications will be verifed through lm 79 and lm 80 report of nabl accredited lab before supply of led fixtures and complete all as specified and directed. make:havells / phillips / orient 36 s&f in repair led alumimium housing with inbuilt smart motion sensor based auto dimmable batten luminaire surface mounted, 4 feet system wattage of 20 wattsand including connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixe complete all as pecified and directed by engr in charge make: shakti fixtures pvt ltd / havells / phillips / orient / 37 s&f in replacement gate light fitting led type 25 w with cct not less than 5700k / 3000k / 4000k , and ip 65 protection , 230vrecessed mounting mirror opticluminare complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, make :havells / phillip / indoasian complete includingwire and making connection complete with pole all as specified and directed by engr in charge. 38 s & f in replacement of led post top globestarmade up of unbreakable polycarcarbonate suitable for mounting on gate with led bulb 12 wwith proper arrangements and making electrical connection and complete all as specified and directed. make : wipro / bajaj / havells 39 supply and fix led alumimium batten luminaire surface mounted, 2 feet system wattage of 10 watts with lifetime ofnot less than 50000 burning hours with 70% of its initial lumen maintained and including connecting up with pvc sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixe complete all as pecified and directed by engr in charge.make:havells / phillips / orient 40 s&f in replacement of led light fitting recess mounted 36 watt, 1 x 4 with all accessories suitable for amstrong / grid / pop ceiling complete with integrated electronic driver and making electrical connection with making electrical connection with three core copper wire to ceiling rose properly and complete all as specified and directed.make:havells / phillips / wipro 41 s&f in replacement of led light fitting recess mounted 31 / 32 watt, 2 x 2 with all accessories suitable for amstrong / grid / pop ceiling complete with integrated electronic driver and making making electrical connection with making electrical connection with three core copper wire to ceiling rose properly and complete all as specified and directed.make:havells / phillips / wipro 42 s&f in replacement of of highway discreet led , pdc housing & internal led driver, pc lens to provide better uniform distribution, ip 65 protection siutable for 60 / 80 watts with all assesoriesi.e. clamp , nut bolts washer and connecting electrically with 3 core copper flexible wire of size 1.5 sqmm from ceiling rose to fitting and complete all as specified and directed. make:havells / phillips / wipro / bajaj 43 s&f in replacement of of highway discreet led , pdc housing & internal led driver, pc lens to provide better uniform distribution, ip 65 protection siutable for 120 / 140 watts with all assesoriesi.e. clamp , nut bolts washer and connecting electrically with 3 core copper flexible wire of size 2.5 sqmm from ceiling rose to fitting all as sfd and directed. make:havells / phillips / wipro / bajaj 44 supply and fixing in repair 10w surface mounted ip65 bulkhead with system efficiency of 100lm / watt led bulk head shall be made up of die cast aluminium housing for better heat decapitation.p.f>.95with thd <10%, surge protection 4kv input voltage rane 150vto 270v including connecting electricaly to ceiling rose using cord flexible 3 core pvc insulated over all sheathed with flexible copper conductor of size 0.75 sqmm and complete all as specified and directed. make:havells / phillips / orient 45 m&l in repairfor sheet metal enclosure mcb distribution board single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts, complete with one single pole mcb of 25 amps earthing and complete all as specified and directed . 46 m&l in repairfor rccb , double pole, single phase240 volts , rated current 25 amp, sensitivity 30 ma, 10 ka complete using thimbles of required size complete suitable for fitted in box.make: legrand / havells / c&s / indoasian 47 supply and fix in repair sheet metal enclosure mcb distribution board, double door with ip 43 protection with acrylic cover single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing db and making good distributed wall surfaces to match with existing specification and complete all as specified and directed.make:legrand / havells / indoasian / l&t 48 all as per srl item no 47 above butfor 8 way and complete all as specified and directed . 49 m&l in repair for mcb single pole 240 volts 6 to 30 amps, with rupturing capacity 10 ka using thimbles of required size and complete all as specified and directed. 50 m&l in repair mcb single pole & neutral 240 volts 40 amps, with rupturing capacity 10 ka using thimbles of required size and complete all as specified and directed. 51 all as per item no 50 above but of size 63 amps and complete all as specified and directed. 52 supply and fix in replacement of led wall security light 25 watt ip 66 energy saving & environmental friendly long lifepressure die cast aluminium housing for better heat decapitation efficiency not less than of 100 lm / wat , p.f>.95with thd <10%, surge protection 4kv input voltage rane 150vto 270vincl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 sqmm multistranded twin core alum cable pvc insulated and complete all as specified and directed. make : havells / phillips / orient 53 s & f in repair distribution board iron clad, double door with ip 43 , ik 09 protection suitablefor mccb as incommer and mcb as outgoing 415 volts 3 phase 50 c / s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one mccb 3 pole 415 volts 63 amps rating with rupturing cap 16 ka of the same make as of distribution board & with mcbs of required size making connection with thimbles & including cutting chases to wall for fixing db and making good the disturbed wall surface and complete all as specified and directed. 54 s & f in repair switch socket combination 2 in 1, 3 pin, 5amp flush type universal with complete box all as specifid and directed. make: ssk / anchor / havells 55 s & f in repair switch socket combination 2 in 1, 3 pin, 15 amp flush type universal with complete box all as specifid and directed make: ssk / anchor / havells 56 s & f in repair switch socket combination 2in 1, 5 a flush types all as specifid and directed make: ssk / anchor / havells 57 s & f in repair switch socket combination 2in 1, 15 a flush types all as specifid and directed make: ssk / anchor / havells 58 s & f in repair led bulb of 09 watt cool day light eco friendly energy efficient and complete all as specified and directed. havells / phillips / orient 59 s & f in repairsolar led pathway lights bollard type waterproof outdoor lighting path light ip65 , for garden ( warm white / coolday whitenot less than 15 w and hight not less tha 80 cm with high efficient leds including not less than 8w / 5v monocrystalline solar panel & high battery backup suitable for 10 hrs working timeand the light , automatically turns on the light at night and turns off in the morning ( dusk to dawn ) , need to make the switch on & off which makes this solar decorative with suitable pcc foundation and making all electric connection all as specified and directed. make : axxon tech / as per approved by ge 60 taking down carefully copper / aluminium point wiring ( light, fan, socket or power ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified. 61 point wiring for one light point / fan / bell point controlled by one switch with 1.5 sqmm pvc insulated unsheathed copper conductor single core multi strand flexible cable frls with proper color coding and 1.5 sqmm pvc insulated unsheathed copper conductor single core multistranded cable ( green color ) as earth lead in and including concealed non metalic rigid pvc conduit medium grade size 25mm dia with all fittings ( isi marked ) controlled by one switch including ci / ms sunk box of required size & as directed & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with theexisting specification and complete all as specified and directed. make of cable : havells / polycab / anchor 62 all as per srl item no 61 here in above but upto ceiling height and on surface at ceiling and complete all as specified and directed. 63 all as per srl item no 61 here in above but in existing conduit and complete all as specified and directed. 64 all as per srl item no 61 here in above but for one 3 pin 15 amps socket outlet independentwith 2.5 sqmm pvc insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm pvc insulated unsheathed copper conductor single core cable ( green color ) as earth lead in and incl conduit and complete all as specified and directed. 65 all as per srl item no 61 here in above but for one 3 pin 15 amps socket outlet independentwith 2.5 sqmm pvc insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm pvc insulated unsheathed copper conductor single core cable ( green color ) as earth lead in existing conduit and complete all as specified and directed. 66 all as per srl item no 61 here in above but for one 3 pin 5a socket outlet independent controlled by one switch and complete all as specified and directed. 67 all as per srl item no 61 here in above but for one 3 pin 5a socket outlet independent controlled by one switch in existing conduit and complete all as specified and directed. 68 all as per srl item no 61 here in above but for one 5a socket outlet on the same board controlled by one switch and complete all as specified and directed. 69 all as per srl item no 61 here in above but for one 5a socket outlet on the same boardcontrolled by one switch in existing conduit and complete all as specified and directed. 70 all as per srl item no 61 here in above but for one light point controlled by 2 nos two way switches and complete all as specified and directed. 71 all as per srl item no 61 here in above but for one light point controlled by 2 nos two way switches in existing conduit and complete all as specified and directed. 72 all as per srl item no 61 here in above but for one light / fan / bell point including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories and complete all as specified and directed. 73 all as per srl item no 61 here in above but for one socket outlet 5 amps on indipendent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories and complete all as specified and directed. 74 all as per srl item no 61 here in above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories and complete all as specified and directed. 75 all as per srl item no 61 here in above but for one light point controlled by two, two way switches including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories and complete all as specified and directed. 76 all as per srl item no 61 here in above but for one 3 pin 15 amps socket outlet independentwith 2.5 sqmm pvc insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm pvc insulated unsheathed copper conductor single core cable ( green color ) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories and complete all as specified and directed. 77 m&l in replacement forsubmain wiring with two single core pvc insulated flexible copper conductor multistranded cable ( frls ) of size 4 sqmm with proper color coding and one single core pvc insulated flexible copper conductor multistranded cable green colour of size 4 sqmm as earth lead in & including concealed pvc conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification and complete all as specified and directed. make of cable : havells / polycab / anchor 78 all as per srl item no 77 here in above but in existing concealed conduit and complete all as specified and directed. 79 all as per srl item no 77 here in above but for cable of size 6 sqmm and one single core pvc insulated flexible copper conductor multistranded cable green colour of size 6 sqmm as earth lead in & including concealed pvc conduit and complete all as specified and directed. 80 all as per srl item no 77 here in above but for cable of size 6 sqmm and one single core pvc insulated flexible copper conductor multistranded cable green colour of size 6 sqmm in existing concealed conduit with earth wire 4 sqmm and complete all as specified and directed. 81 all as per srl item no 77 here in above but for cable of size 10 sqmm and one single core pvc insulated flexible copper conductor multistranded cable green colour of size 6 sqmm in & including concealed pvc conduit and complete all as specified and directed. 82 supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with pvc insulated aluminium multistranded conductor 6 sq. mm nominal cross section twin core for service connectionsand complete all as specified and directed. 83 all as per srl item no 82but cable of size 10 sqmm 2 core and complete all as specified and directed. 84 all as per srl item no 82but cable of size 16 sqmm 2 core and complete all as specified and directed. 85 m&l in replacement of earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using gi wire 4mm dia as earth continuity conductor connected to earth plate by means of gi thimbles nuts bolts washers all as directed including providing earth wire protection pipe gi light grade15mm dia from earth plate to main switch board / panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and rcc pit cover in pcc 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in ep no 5 of ssr part i 1991 or testing on completion and complete all as specified and directed....

Uttar Pradesh Jal Nigam - Uttar Pradesh

37189460 supply of material for government girls inter college, ram nagar, distt mahoba as per nit and tender document , cement(ppc) , coarse sand , fine sand , ist class brick , coloured cc pavour block 60mm thick(m 35) , tor steel 8mm dia , tor steel 10 mm dia , tor steel 12mm dia , stone grit 10 20mm , stone ballast 20 40mm , white cement , vitrifiedtiles (600x600) , floor tiles (300x300) , wall tiles (300x450)mm , kota stone 25mm thick , granite stone , flush door (single leaf 35mm) , flush door (double leaf 35mm) , ss sliding bolt (300x16) , ss tower bolt (300x10) , ss handle100mm , obd paint (20 lt) , exterior paint (20 lt) , enamel paint , red oxide(20 lt) , wood primer , putty (40 kg) , glass panes 4mm thick , wc pan (orissa pan) 580x440 , c.i. p trap 100mm , ewc withplastic cover , health faucet , pvc flushing cistern 10 ltr , long bend , wash basin (550x400) , pillar cock 15mm , laboratory sink (450x300x150) , pvc waste pipe 32mm , pvc waste pipe 40mm , urinal (430x260x350) , cp brass bib cock 15mm , cp brass long body 15mm , cp brass angle valve 15mm , cp brass two way angle valve 15mm , pvc connection pipe 45 cm long 15 mm dia , ms foot rests for septic tank (20x20 mmms square bars) , ptmt towel rail , ptmt liquid soap container , c.i. nahani trap (100x75 mm) , c.i. pipe (100 mm dia) , c.i. pipe (75 mm dia) , c.i. coller 100 mm dia , c.i. coller 75 mm dia , c.i. plain bend 100 mmdia , c.i. plain bend 75 mmdia , c.i. tee 100 mmdia , c.i. tee 75 mmdia , glazed stone ware pipe 100mm dia , glazed stone ware pipe 150mm dia , glazed stone ware pipe 200mm dia , sw gully trap 150x100 mm size p type , pvc pipe confirming to is 13592 tye a 160 mm dia , pvc plain bend 160 mm dia , g.i. pipe 15 mm dia , g.i. pipe 20 mm dia , g.i. pipe 25 mm dia , g.i. pipe 32 mm dia , g.i. pipe 40 mm dia , g.i. pipe 50 mm dia , g.i. pipe 65 mm dia , gun metal gate valve 25 mm dia , gun metal gate valve 32 mm dia , gun metal gate valve 40 mm dia , gun metal gate valve 50 mm dia , gun metal gate valve 65 mm dia , g.i elbow 15 mm , g.i elbow 20 mm , g.i elbow 25 mm , g.i elbow 32 mm , g.i elbow 40 mm , g.i elbow 50 mm , g.i elbow 65 mm , g.i socket 25 mm , g.i socket 32 mm , g.i socket 40 mm , g.i socket 50 mm , g.i socket 65 mm , g.i tee 15 mm , g.i tee 20 mm , g.i tee 25 mm , g.i tee 32 mm , g.i tee 40 mm , g.i tee 50 mm , g.i tee 65 mm , g.i reducer 20x15 , g.i reducer 25x20 , g.i reducer 32x25 , g.i reducer 50x40 , g.i reducer 65x50 , soot gola , water storage tank , tank nipple 25 mm , tank nipple 32 mm , tank nipple 40 mm , union 40 mm , union 32mm , union 25mm , union 20mm , cp waste coupling 40 mm , cp waste coupling 32 mm , cp jali , cp dome grating , cp spreader , ms clamp 160mm , modular g.i. box with face plate 2m , modular g.i. box with face plate 3m , modular g.i. box with face plate 4m , modular g.i. box with face plate 6m , modular g.i. box with face plate 8m , modular g.i. box with face plate 12m , modular g.i. box with face plate 18m , switch 6 amp , socket 6amp , switch 16amp , socket 16amp , call bell with buzzer , 1.00 sqmm frlsh multistarnd copper conducter , 1.50 sqmm frlsh multistarnd copper conducter , 2.50 sqmm frlsh multistrand copper conducter , 4.00 sqmm frlsh multistrand copper conducter , 6.00 sqmm frlsh multistrand copper conducter , 10.00 sqmm frlsh multistrandcopper conducter , 16.00 sqmm frlsh multistrand copper conducter , ceiling fan 1200mm (havells, bajaj etc.) , fan regulator , exhaust fan 300mm , hpf box type fluroscent tubelight 1x40 , hpf box type fluroscent tubelight 2x40 , wall bracket , decorative mirror light 1x18 watt , ceiling rose , factory fabricated m.s. box 600x480x200 mm , 6 way tpn box , mcb 6 32 amp , mcb blanking plate , holder , 40 amp 4pole mcb (10ka) , 63 amp 4pole mcb (10ka) , main lt pannel , copper cable 10mm3 phase 04 core , conduit pipe 25mm , surface junction 25mm , pvc bend 25mm , fan sheet , round sheet , danger board , chequrred rubber matting 1800x900x12 mm thick , pvc pipe confirming to is 13592 tye a 110 mm dia , armoured al. cable 120 sqmm 3.5 core , al. cable 6 sqmm 2 core , service bracket for street light50mm dia g.i. pipe 4.00m long complete in all respect , hpf street light with fluroscent tube light fitting 1x40 watt , brass nickle plated compressor gland 6aqm 2 core , 120 sqmm 3.5 core , copper tin plated cables socket (lugs) 6 sqmm , 70 sqmm , 120 sqmm , china screw 1 inch , screw 1.5 inch , machinery screw 1 inch , machinery screw 1 .5inch , royal plug(100 pcs) , royal screw 1 inch , tape roll , stand post type fire hydrant with 63 mm outlet complete with bots nuts and rubber insertion , ms pipe (class b) 100 mm , c.i. double flanged butterfly valve , c.i. double flanged non returnvalve , first aid hose reel (20mm dia and 30 meter long) complete , 63 mm dia gun metal short branch pipe , rrl hose pipe 63 mm dia 15 m long , fire man axe , air vessel tank , fire hose cabinet (1000x1800mm) , fire brigade inlet (complete) , electrical motor driven terrace pump discharge 450 lpm head 25 m , fire extinguister 9 ltr capacity water type co2 (gas pressure)...

Military Engineer Services - Uttar Pradesh

37189304 tender for repair/ maintenance of plaster, chajja, flooring, tanks, external periodical and connected items in the area of age b/r ii under ge (east) lucknow 1.00 m&l for preparation of old decorated plastered or un plastered surface of walls, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying one coat of white wash on walls mixed with adequate quantity of fevicol complete all as specified and directed. 2.00 m&l for preparation of old decorated plastered or un plastered surface of ceiling, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying one coat of white wash on ceiling mixed with adequate quantity of fevicol complete all as specified and directed. 3.00 m&l for preparation of old decorated plastered or un plastered surface of walls, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying two coat of white wash on walls mixed with adequate quantity of fevicol complete all as specified and directed. 4.00 m&l for preparation of old decorated plastered or un plastered surface of walls, cornices, pilasters etc by rubbing /scraping by sand papers, filling all the nail holes with putty and making the surface smooth after rubbing with sand paper and applying one coat of colour wash on walls complete all as specified and directed. 5.00 m&l for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed. 6.00 m&l for preparation of old decorated plastered or un plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying one coat of cement base paint on walls tinted or white including complete all as specified and directed 7.00 m&l for preparation of old decorated plastered or un plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and directed 8.00 m&l for preparation of old plastered surface and applying two coats of oil bound distemper including necessary preparation complete all as specified and directed 9.00 m&l for preparation of complete removal of existing treatment on old plastered surface and applying two coats of oil bound distemper over two coats of wall care putty including necessary preparation complete all as specified and directed. 10.00 m&l for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed 11.00 m&l for preparation of old decorated plastered surface of walls, and applying two coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed 12.00 m&l for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed 13.00 m&l for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed 14.00 m&l for two coats of 100% premium acrylic emulsion paint having voc less than 500 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed. (note primer and emulsion to be carried out through air less spray machin by skilled painter). 15.00 m&l for waterproof cement based putty @ 1 kg(undiluted) per sqm of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having rpm not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps: step 1) mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.step 2) apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 psi step 3) allow 6 8 hrs time to dry the putty surface. 16.00 supply only integral water proofing compound (dr. fixit or equivalent) complete all as specified and directed. 17.00 m&l for pcc 1:5:10, type e 2 (using 40 mm graded stone aggregate) as in mass concrete of floor etc complete all as specified and directed. 18.00 m&l for 20 mm thick cement plaster (on roof projection, chajjas, ceiling etc.) in cm (1:3) mixing an integral water proofing compound, sika cim @ 100 gms per bag of cement over 1st coat of sika® topseal 107, acrylic polymer modified cementations waterproofing coating, incl 2nd coat of sika®topseal 107, acrylic polymer modified cementations waterproofing coating, finished the surface even and smooth without using extra cement including necessary scaffoldings complete upto g+2 floor buildings complete all as specified and directed. 19.00 demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed 20.00 m&l for rcc 1:1½ :3, type a1 (using 20 mm graded stone aggregate) as in chajjas/shelves etc complete all as specified and directed. 21.00 m&l for tmt bars 6 to 8 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl ms wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to fe 415 or fe 500 complete all as specified and directed. 22.00 m&l for formwork to sides and soffits of concrete of roof beams, lintel beams, cantilevers, shelves, chajjas etc complete all as specified and directed 23.00 taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 24.00 m&l for 15mm thick rendering on fair faces of brick work or concrete surface of wall in cm 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed 25.00 m&l 15 mm thick rendering in cm 1:4 on external surfaces of brick walls at any height with liquid water proofing compound as per manufacturers instruction surface finished even and smooth without using extra cement complete all as specified and directed. (note: wpc shall be measured and paid seperately only) 26.00 m&l for 5mm thick rendering in cm 1:3 on rcc ceiling surface complete all as specified and directed . 27.00 m&l for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. 28.00 m&l for preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed. 29.00 m&l for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and directed. 30.00 m&l preparation of new plastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. 31.00 dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. 32.00 m&l for glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm/600x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 33.00 m&l for non skid ceramic (coloured) tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.09 sqm but not exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer with cm 1:6 complete all as specified and directed. 34.00 m&l for non skid ceramic (coloured) tiles of 7 8 mm (square or rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed. 35.00 m&l for 10mm thick vitrified ceramic coloured tiles light shade (square/rectangular) polished area of each tiles not exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 15mm thick screed bed in cm 1:6 complete all as specified and directed 36.00 demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed 37.00 m&l for tmt bars 10mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and including ms wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to fe 415 or fe 500 complete all as specified and directed. 38.00 m&l for rcc 1:2:4, type b 1 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves complete all as specified and directed. 39.00 m&l for form work to soffits of suspended slabs, such as shelves and similar work, not exc. 200 mm thick for flat rough finish surfaces complete all as specified and directed. 40.00 m&l for 20mm thick granite for whb plateform (of any type) machine cut laid over 20 mm thick screed bed in cm 1:6 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 41.00 demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 42.00 m&l for brick work with fly ash brick using old size bricks with sub class b bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 43.00 all as per item no 42 but except bricks. (note: old unserviceable bricks obtained against item no 41 shall be used) 44.00 m&l for brick work with fly ash brick using old size bricks with sub class b bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. 45.00 s&f for 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed 46.00 s&f for 20 mm tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed 47.00 s&f for 500 ltr capacity rotational moulded polyethylene water storage tanks isi marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i including dismantling of existing one complete all as specified and directed 48.00 s&f for 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i including dismantling of existing one complete all as specified and directed 49.00 s&f for 2000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i including dismantling of existing one complete all as specified and directed 50.00 s&f in repair 20mm ptmt float valve, high pressure with polythene float and flynut complete, screwed for iron pipe etc complete all as specified and directed. 51.00 s&f in repair 25 mm dia float valve high pressure of ptmt with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. 52.00 s&f in repair 20mm dia gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 53.00 s&f in repair 15mm bore dia of pipe bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc rewed down screwed for iron pipe or for brass ferrule complete all as specified and directed. 54.00 s&f in repair 15mm dia concealed stop valves concealed type cp with fancy type,chromium plated with long shank and cup, complete all as specified and directed. 55.00 s&f in repair 15mm dia cp stop valve/angle cock chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe of brass ferrule complete all as specified and directed. 56.00 s&f in repair brass chromium plated shower rose with swivel joints 125mm dia including fixing to steel pipe or union complete all as specified and directed. 57.00 s&f in repair brass chromium plated wall mixer 2 in 1 system suitable for 15mm bore of pipe approved quality complete all as specified and directed. 58.00 s&f in repair health faucet (hand shower) 8 mm dia, 1 m long flexible metal tube and wall hook/holder in polished crome complete all as specified and directed. 59.00 s&f in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with swan neck chromium plated screwed down hidh pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. 60.00 s&f in repair vitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. 61.00 s&f vitreous china wash down water closet pan pedestal pattern, including p & s trap and connection to drain (or outgoing pipe) excluding pvc seat cover, flushing cistern and flush pipe complete all as specified and directed 62.00 s&f in repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel cp or aluminum hinging device complete all as specified and directed. 63.00 s&f in repair 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, pvc connection, cantilever brackets incluiding taking down existing cistern etc complete all as specified and directed. 64.00 s&f in repair vitreous china wash hand basin white size 550 x 400mm including brackets complete all as specified and directed. 65.00 s&f in repair vitreous china wash hand basin under counter type oval shape of size 550x400mm including brackets, waste fittings complete all as specified and directed. 66.00 s&f in repair 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and directed. 67.00 s&f in repair 32 mm bore low density pvc flexible pipe for wash hand basin/sink etc complete all as specified and directed. 68.00 s&f in repair pvc connections 15 mm size with ptmt nuts of length 450 mm complete all as specified and directed. 69.00 s&f in repair cp grating with or without waste hole size 100 mm fixed with white cement in tiles flooring complete all as specified and directed. 70.00 m&l in repair soap dish with glass tray fixed to wall with plug and chromium plated brass screw embedded in the wall complete all as specified and directed 71.00 s&f in repair 110mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. 72.00 s&f in repair 75mm bore pvc (swr) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. 73.00 s&f in repair 110mm bore pvc (swr) bends, any radius fixed to walls including distance pieces and stack clamps complete all as specified and diredted. 74.00 s&f in repair 75mm bore pvc (swr) bends, any radius fixed to walls including distance pieces and stack clamps complete all as specified and diredted. 75.00 s&f in repair 75mm dia pvc (swr) floor trap, plain with grat ing including joint ing with solvent cement complete all as specified and directed. 76.00 s&f in repair sheet glass shelf assemble consisting of 5.5 thick sheet glass shelf 12cm wide with cp bracket gaurd & railing 60cm long complete all as specified and directed. 77.00 dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed 78.00 m&l false ceiling with 4 mm thick e board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with gi imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide t section, runner made of 0.33 mm gi sheet and angle made of 0.45 mm gi sheet, suspended with 2 mm dia gi wire complete all as specified and directed 79.00 s&f in repair 4 mm thick e board tiles of size 600 x 600 mm (without grid work) in ceiling fixed with screw or as per manufacturer instruction complete all as specified and directed. 80.00 taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exc 1.5 sqm each complete all as specified and directed. 81.00 taking down chowkats or frame with shutter (without taking of shutters from the frames) area exc 1.5 sqm but not exc 4 sqm each with shutter complete all as specified and directed. 82.00 s&f for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed 83.00 m&l for pcc 1:3:6 type c 1 (using 20mm thick graded stone aggregate) for embedding of hold fast etc complete all as specified and directed 84.00 s&f mild steel work for hold fasts, supports or stays for rain water, knee piece inserts, two way and three way straps, plate washers and similar small articles etc conforming to fe 290 gde e 165 complete all as specified and directed 85.00 s&f 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed 86.00 s&f 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed 87.00 s&f 250 mm long aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed 88.00 s&f in repair including taking down by welding or unscrewing of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate fixed with screw or welding complete all as specified & directed 89.00 s&f in repair 125mm aluminium handle, cast type, anodised complete all as specified and directed. 90.00 s&f factory made pvc door frames of size 50mm x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube suitable for opening as per site condition complete all as specified and directed. 91.00 s&f factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour pvc c channel having pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 92.00 s&f for 100mm size butt hinges, stainless steel, and fixed complete all as specified and directed. 93.00 s&f aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed. 94.00 s&f aluminium handles cast type anodised of 150mm complete all as specified and directed. 95.00 s&f aluminium ventilator (louvers) with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings including 3.8mm thick glass and stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed. 96.00 s&f aluminium anodized door with frame of size 100x44.5x 1.5mm, stile, middle and top rails of size 82x44.5x1.5mm thick and bottom rail of size 114x44.5x1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc including aluminium and rubber beading complete all as specified and directed. 97.00 s&f aluminum anodised glazed window with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 nos). hinges type b 21, 100mm long (2 nos) suitable handle (1 nos), tower bolt 150 mm long (02 nos) including powder coated aluminum grills of aperture 75 mm and fixed in frame of window with stainless steel wiremesh including necessary fixing arrangement complete all as specified and directed 98.00 hacking out old broken glass(any thickness, size, quality or description) from wooden/steel /aluminium frames, glazed with putty or fixed with beads complete all as specified and directed. 99.00 s&f of 3mm thick forsted/pin headed glass, ordinary quality and glazing with oil putty in a square not exc 0.5 sqm in each pane complete all as specified and directed. 100.00 s&f in repair looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed. 101.00 s&f in repair 5.5 mm thick bevelled edge mirror of selected quality fixed to wall with stainless steel spacer stud, standoff screws (min 4 nos upto 1.00 sqm), size of standoff screw shall be min 25 x 25 mm complete all as specified and directed 102.00 s&f glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with cp brackets, complete all as specified and directed. 103.00 cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes by following method, etc. capacity of water tank exc. 250 ltrs but not exc 500 ltrs complete all as specified and directed. 104.00 cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes by following method, etc. capacity of water tank exc. 1000 ltrs but not exc 2000 ltrs complete all as specified and directed. ...

Uttar Pradesh Jal Nigam - Uttar Pradesh

37176556 supply of materials for upgradation of upper primary school, bazariya, distt mahoba as per nit and tender document , cement(ppc) , coarse sand , fine sand/local sand , ist class bricks , tor steel 8mm dia , stone grit 10 20mm , stone ballast 20 40mm , white cement , vitrifiedtiles (600x600) , floor tiles (300x300) , wall tiles (300x450)mm , kota stone 25mm thick , granite stone , cheqquered tiles , flush door (single leaf 35mm) , flush door (double leaf 35mm) , sliding bolt (250x16) , tower bolt (250x10) , ms handle125mm , obd paint (20 lt) , exterior paint (20 lt) , enamel paint (chocolate brown) , putty (40 kg) , red oxide primer , wood primer , glass panes 4 mm thick , glass strip , collapsible door shutter , black board , supply wiring of submain with 3 nos 2.50sqmm , switch 6 amp , socket 6amp , switch 16amp , socket 16amp , ceiling fan 1400mm (havells, bajaj etc.) , fan regulator , led tube light 1x 22w , led street light 30 to 40 watt , main lt pannel board (incoming 100amp tpn 1 no. outgoing 63 amp tpn 2 nos.) , 16 amp fp mcb (10ka) , copper wire 1.00sqm , copper wire 1.50sqm , copper wire 2.50sqm , holder , led bulb 9 w , ceiling rose , fan sheet...

Military Engineer Services - Uttar Pradesh

37173264 tender for repair of all type of map furnitures under ge ( east ) lucknow 1 chair dining cushioned (fd/map ii/04 or similar)removing existing unserviceable rear legs of chair dining s&f new rear leg made of ist class seasoned teak wood, rest all as shown on drg and all as specified and directed. 2 removing existing unserviceable front legs of chair dinings&f new front leg made of ist class seasoned teak wood, rest all as shown on drg and all as specified and directed. 3 removing existing unserviceable front/back side rail of chair dinings&f new front/back rail made of ist class seasoned teak wood, rest all as shown on drg and all as specified and directed. 4 removing existing cushion foam seats&f new cushion foam seat of 75mm thick for seat & cover with tapestry cloth including fixing rest all as shown on drg and all as specified and directed. 5 m&l for fixing of pvc shoes superior quality of 25mmx25mm dia with 30mm long screw complete all as specified and directed. 6 bed hard steel : (fd/e6/map/08 (r) or similar) s&f 12mm thick plywood bwp grade,make: archid ply/ green ply/ century ply/kit ply, approved quality in single piece as per drawing without any joint to the bed frame with suitablescrews wood/steel with cup washer including removal of damaged ply wood rest all as shown on drg and all as specified and directed. 7 s&f in reapir to head board of size 635 mm x 200 mm made from 18mm thick pre laminated particle board exterior grade both side decorative finish shade as approved by ge complete including removal of damaged head board rest all as shown on drg and all as specified and directed. 8 s&f in reapir to foot board of size 635 mm x 300 mm made from 18mm thick pre laminated particle board exterior grade both side decorative finish, shade as approved by ge complete including removal of damaged foot board rest all as shown on drg and all as specified and directed. 9 s&f hard rubber shoes as per drg complete all as specified and directed. 10 table bed side (map drg) fd/e6/map/15 (r) or similartaking out old unservicable commercial ply bwr grade, 6 mm thick from the back of table bed side and s&f new back made of6 mm thick commercial ply bwr grade ofmake,(archid /century/green ply) of the same shape and size of the existing back of table bed side rest all as shown on drg and all as specified and directed. 11 taking out old unserviceable top of table bed side and s&f new top made of mdf board exterior grade 18/19 mm thick (archid/green lam/nepal board)of required size and shape as per existing drawing including 0.6 mm thick pvc edging all round the top of table bed side rest all as shown on drg and all as specified and directed. 12 taking out old unserviceable side of table bed side and s&f new side made of mdf board exterior grade 18/19 mm thick (archid/green lam/nepal board)of required size and shape rest all as shown on drg and all as specified and directed. 13 removing the existing unserviceable bottom of top drawer of table bed side and providing new bottom made out of 06 mm thick commercial ply rest all as shown on drg and all as specified and directed. 14 removing the existing unserviceable sides of top drawer of table bed side and providing new sides made out of 12 mm thick commercial ply rest all as shown on drg and all as specified and directed. 15 removing the existing unserviceable front of top drawer of table bed side and providing new front made out of 18 mm thick mdf board rest all as shown on drg and all as specified and directed. 16 removing the existing unserviceable bottom of lower drawer of table bed side and providing new bottom made out of 06 mm thick commercial ply rest all as shown on drg and all as specified and directed. 17 removing the existing unserviceable sides of lower drawer of table bed side and providing new sides made out of 12 mm thick commercial ply rest all as shown on drg and all as specified and directed. 18 removing the existing unserviceable front of lower drawer of table bed side and providing new front made out of 18 mm thick mdf board rest all as shown on drg and all as specified and directed. 19 s&f hard rubber shoes as per drg complete all as specified and directed. 20 table computer (fd/e6/map/03 or similar)removing of existing unserviceable table top for table computer and s&f new table top of 18 mm thick particle board exterior grade duly post formed with 0.6 mm thick laminate in mohigini/walnut coulor/shade as approved with 2 mm thick pvc edging of make: rehau/ pegasus/ kynes shall be fixed on two sides with strong bonded chmical adhesive through hot pressed machine duly fixed table frame with suitable screws wood/steel with cup washer, rest all as shown on drg and all as specified and directed. 21 removing of existing unserviceable key board tray from table computer and s&f new key board tray of size 450 mm x 480 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing telescopic channel, rest all as shown on drg and all as specified and directed. 22 removing of existing unserviceable mouse tray from table computer and s&f new mouse tray of size 380 mm x 200 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing telescopic channel, rest all as shown on drg and all as specified and directed. 23 removing of existing unserviceable damaged drawer from table computer and s&f new drawer of size 380 mm x 200 mm 75 mm deep made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing telescopic channel, rest all as shown on drg and all as specified and directed. 24 removing the existing unserviceable telescopic channel from table computer and s & f in repairs telescopic channel of suitable size for key board tray/mouse tray/drawer of table computer and re fixing the existing key board tray/mouse tray/drawer with new telescopic channel rest all as shown on drg and all as specified and directed. 25 removing of existing unserviceable upper/bottom shelf from table computer and s&f new upper/bottom shelf of size 450 mm x 300 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the frame of table computer with suitablescrews wood/steel with cup washer, rest all as shown on drg and all as specified and directed. 26 welding of broken existing square ms pipe of table computer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade rest all as shown on drg and all as specified and directed. 27 s&f in repair nylon buffers of legs for table computer rest all as shown on drg and all as specified and directed. 28 chair school with hand board (fd/e6/map/05 or similar drg)opening out old unserviceable pvc seat and s&f new pvc seat suitable for chair school with hand board rest all as shown on drg and all as specified and directed.make : featherlite/ durian/godrej 29 removing of existing unserviceable hand board for chair school with hand board and s&f new hand board of size 600 x 300 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed with chair frame with suitablescrews wood/steel and 18x4 mm thick teak wood beading on all round, rest all as shown on drg and all as specified and directed. 30 dressing mirror gents (fd/e6/map /16 or similar)s&f in repair new mirror5 to 5.5 mm thick for dressing mirror gents ofapproved make with complete frame back made out of 12 mm thick commercial ply wood rest all as shown on drg and all as specified and directed. 31 s&f in repair new back of dressing mirror gents made out of 12 mm thick commercial ply wood rest all as shown on drg and all as specified and directed. 32 removing of existing unserviceable sides of dressing mirror gentsand s&f new side of size 1200 x 100 mm made out of 18mm thick prelaminated mdfboard exterior grade with decorative finish both side , rest all as shown on drg and all as specified and directed. 33 removing of existing unserviceable side (top/bottom) of dressing mirror gentsand s&f new side (top/bottom) of size 600 x 100 mm made out of 18mm thick prelaminated mdfboard exterior grade with decorative finish both side ,rest all as shown on drg and all as specified and directed. 34 s&f in repair of glass shelvesof dressing mirror gents 5 to 5.5 mm thick including supply & fixing of runner/glass holder to the dressing mirror gents, rest all as shown on drg and all as specified and directed. 35 chair dining pvc seat (fd/map ii/05 or similar) removing the existing unserviceable rear leg and providing with new teak wood rear leg rest all as shown on drg and all as specified and directed. 36 removing the existing unserviceable front leg and providing with new teak wood front leg rest all as shown on drg and all as specified and directed. 37 removing the existing unserviceable back rest and providing new teak wood back restslightly curvedrest all as shown on drg and all as specified and directed. 38 removing the existing unserviceable front/rear/side rail and providing new teak wood front railrest all as shown on drg and all as specified and directed. 39 removing the existing unserviceable pvc seat and s&f new pvc seat to the chair with suitable steel/wooden screws rest all as shown on drg and all as specified and directed. 40 m&l for fixing of pvc shoes superior quality of 25mmx25mm dia with 30mm long screw complete all as specified and directed. 41 teapoy verandah (fd/e6/map/17 or similar) replacement of existing unserviceable table top for teapoy verandah made out of 18 mm thick particle board exterior grade duly post formed with 0.6 mm thick laminate in mohigini/walnut coulor/shade as approved with 2 mm thick pvc edging of make: rehau/ pegasus/ kynes shall be fixed on two sides with strong bonded chmical adhesive through hot pressed machine, rest all as shown on drg and all as specified and directed. 42 s&f hard rubber shoes as per drg complete all as specified and directed. 43 chair verandah (officers) fd/e6/map/ii/06 or similarrepair/replacement of broken leg, each one piece made of ms conduit pipe 16g, 19mm dia including welding andproviding two coat of synthetic enamel paint over a coat of red oxide primer to match the existing shade rest all as shown on drg and all as specified and directed. 44 s&f hard rubber shoes as per drg complete all as specified and directed. 45 removing old unserviceable seat & back of chair verandah and s&f new seat & back rest all as shown on drg and all as specified and directed.note: 1 seat & 1 back will be measured as single unit. 46 m&l for welding of broken joints of following furniture items all as per drg & as directed : teapoy verandah 47 rack shoe steel 48 chair school with hand board 49 table bed side (map) 50 bed hard steel 51 removal of existing worn out painting including preparation of surface of the following steel furniture and m&l for applying two coats of synthetic enamel paint (1st quality)white/ black over a coat of red oxide primer, rest all as shown on drg and as directed: teapoy verandah 52 rack shoe steel 53 chair school with hand board 54 table bed side (map) 55 bed hard steel 56 m&l for preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of melamine polishover a coatwax to the depressed surface forsmooth finishing complete all as specified on drawing and as directed : chair dining cushioned 57 dressing mirror gents fd/e6/map /16 58 chair dinning cushioned 59 chair dinning pvc seat 60 sofa set 4/5 person with cushion fd 281, fd 373 replacement of existing u/s cushion of sofa set with new foam cushion 40 density 100mm thick of duroflex/sleepwell/kurlon make duly covered with tapestry cloth including mulmul cloth and stitching, rest all as shown on drg and as directed by engr in charge. note : (i) each cushion for seat or back will be measured as single unit. (ii)the tapastrycloth shall be matt finish and shall not less than rs. 250/ per metre and as approved by ge. the cover will be stitched on three sides and one side fitted with good quality zip 61 repair of sofaset 5 seater spl type removing of unsv /wornout rexine/tapestry and fixing new superiior quality rexine/ tapestry including repair of all parts of sofa set, replacement of unserviceable cushion with 40 density sleepwell/kurlon (gold line), springs 62 repair of sofaset 4 seater spl typeremoving of unsv /wornout rexine/tapestry and fixing new superiior quality rexine/tapestry including repair of all parts of sofa set, replacement of unserviceable cushion with 40 density sleepwell/kurlon (gold line), springs 63 replacement of unsv cushion covers&f new cushion cover duly stitched three sides and one side provided with good quality zip. (the cost of tapestry cloth should not be less than rs 250 per meter) the shade and quality of cloth shall be approved by ge 64 s&f energy saving ceiling fan of 1200 mm sweep of 330 370 rpm, 220 240 volts, ac, 50 hz, isi marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.make : havells, model: es 50 premium or usha, model: energia star isi or crompton greaves, model: empower 50 ...

Urban Development Department - Uttar Pradesh

37172043 bids are invited for high mast supply and fixing of 16mtr high mast , supply and fixing of alluminium pvc insulated sheathed cable 1100v 10sqm 2 core , supply and fixing of led flood light dia cast aluminium body 170w to 200w with driver cat aaa isi marked , supply and fixing of tpn 63amp 415 volt , supply and fixing of b p pipe for cable protection , supply and fixing of 90mm dia ac doen pipe complete with rose heads bends ms clamps 2 point 5 cm into 3mm fixed to walls by 15cm long 6mm dia nail and including repair of plaster pointing etc total quantity : 475...

Department Of Education - Uttar Pradesh

37161860 bids are invited for staitanery and dealy use item ambrose painting high quality branded , atlas bharat and world sheet bundle high quality branded , flude and diluter kangroo munix no 763740 , binder clips 25 mm infinity no. inf bc25 box 12 pcs , board pin box high quality branded , ball point pen cello , ball pen riffel big high quality branded , ballpen riffel small high quality branded , natraj ball pen 100 pcs box , black chart sheet high quality , brush set 0 number 10 pcs high quality branded , brush set 1 number 10 pcs high quality branded , brush set 2 number 10 pcs high quality branded , brush set 3 number 10 pcs high quality branded , brush set 4 number 10 pcs high quality branded , class attandance register big high quality , class attandance register small high quality , copy hindi classmate 02 no , copy hindi classmate 03 no , copy hindi classmate 04 no , copy science classmate 03 no , copy linemath classmate 03 no , copy math classmate 02 no , copy math classmate 03 no , copy math classmate 04 no , copy drawing 200 page high quality , copy drawing 100 page high quality , copy english classmate 02 no , copy english classmate 03 no , copy english classmate 04 no , scissors big high quality branded , scissors small high quality branded , cash book 04 quire neelgagan brand , ledger 04 quire neelgagan brand , calculator orpat 12 digit modal no mj120d , connecter pen luxar high quality branded , dvd r 4 7gb 16x moserbaer box 10 pack , fevicol fevi stik super glue stick 15 g , pin container high quality , rim a4 70 gsm 91 brightness 500 sheets century brand , rim legal 70 gsm 91 brightness 500 sheets century brand , thermocol cutter natraj , thermocol sheet 25 mm high quality , thermocol sheet 18 mm high quality , envolope 10cm 22 8cm packet 25 pieces , highlighter markar pen camlin , punch player one hole kangaroo modal no. 376224 , pvc roll 50 mtr high quality , geometric tool compass high 1 107roll 50 mtr high quality , geometric tool compass high size 115mm65mm , stock register 04 quire neelgagan , stapler kangaroo 10 no modal 384556 , stapler kangaroo big , stapler pin box kangaroo munix 10 no modal no 384556 , stapler pin box kangaroo munix 24 6 1m modal no 384556 , drawing files high quality branded , drawing sheet for files 50 page packet high quality branded , attandance register staff high quality , attandance registerstudents high quality , wooden duster high quality , nickel plated steel pins bell pins box 70 gm , water color packet camlin , water color plate high quality , acryliccolorset 06 pcs pidilite , char paper all color high quality , color chowk carton 36 box high quality , white chowk carton 36 box high quality , protractor bsg , plastic coated filecover , folder high quality , fevicol 500 gms , geometry box small bsg , jel pen cello , notice board 34 feet high quality , teachers diary high quality , outline 3d color pidilite all color , gum bottle 700 ml high quality branded , gatta mota high quality , gatta patla high quality , glass color set camlin , luxar pilot high teckpoint v5 , guard file high quality , log book high quality , bansi paper roll , latter dispatch register 04 quire neelgagan , toothpaste colgate 50 gram , toothbrush colgate , shampoo dabur vatika 100 ml , stayfree secure cottny cover with wings 20 pads pack , nycil prickly heat powder 150 gram , lakhani good times school shoes black color according to the size , handkerchief towel cloth high quality , vim sishwash bar 500 gram , goodnight power active plus twin saver pack , rin detergent powder refresh lemon and rose 500 gram , godrej no 1 bathing soap , cloth washing brush plastic high quality , ujala supreme 250 ml , hair oil shanti amla 100 ml , comb plastic high quality , maxo mosquito repellent 45 nights , tounge cleaner high quality , shocks brown color medium size high quality , shocks white color medium size high quality , 100 percentage cotton plastic tyed panty according to the size , sleepar lakhani roma according to the size , nail cutter big size high quality , bathroom stool patla round high quality branded , floor wiper standerd size plastic high quality branded , paddle dustbin printed 18 ltr branded , dustpan plastic branded high quality , phul jhaadoo thukral , narial jhaadoo thukral , phenyle can 05 ltr branded high quality , sameez full cotton according to the size , harpic toilet cleaner power plus original 500 ml , 2 107the size , harpic toilet cleaner power plus original 500 ml , veseline zelly original pure scin 20 gram , medikar antiliece total quantity : 168...

Institute Of Financial Management Training And Research - Uttar Pradesh

37092952 bids are invited for horticulture and landscaping work at ifmtr zeenia , vinga hybrid , sunflower big , sunflower small , chochia , cosmos , portulaka desi , portulaka hybrid , amryllis lily , gaillardia , morning glory , hellichrysm , gompherna , rose hybrid , hibiscus hybrid big , peace lily , celocia , lizianthus , mogra total quantity : 3840...

Institute Of Financial Management Training And Research - Uttar Pradesh

37060661 bids are invited for horticulture and landscaping work at ifmtr zeenia , vinga hybrid , sunflower big , sunflower small , chochia , cosmos , portulaka desi , portulaka hybrid , amryllis lily , gaillardia , morning glory , hellichrysm , gompherna , rose hybrid , hibiscus hybrid big , peace lily , celocia , lizianthus , mogra total quantity : 3840...

Rural Engineering Department - Uttar Pradesh

37045090 tender for electrification work in different please of anganwadi kendra in district chitrakoot 1 wiring point for light with 1 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable in heavy guage p.v.c. conduit pipe on surface in the wall, complete with 14 swg copper earth continuity wire, piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour 131c ( 121c, 188a &187a ) 2 same as in item no 1 but for fans and fresh air fans ( light duty fan ) ( 123c, 188b &187a ) 3 same as in item no 1 but 5amp plug point with piano type switch and socket. ( 123c, 188b & 187a ) 4 supply and wiring of submain with two number 2.5sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia pvc casing with one number 1.5 sq. mm miltistand copper conduetar cable as earth continuity wire drawn in conduit. ( 1301c ) 5 supply of led tube light with batten suitable for up to 1x22 watt led tube light complete i / c tube etc. ( 1413cataaa ) 6 s / f of ceiling fan 1200mm sweep double ball bearing isi marked ( l.m.r ) 7 s / f of electronic fan regulator 120 280 watt isi marked, on the existing switch board i / c making connection required material labour t&p etc. ( 1203c ) 8 s / f / l.e.d. bulb light 7 15w ( local market rate ) ( l.m.r ) 9 s / f of 6 amp to 32 amp d.p. m.c.b. 10 / ka c curve. ( 1002 cat b ) 10 s / f of fresh air fans i / c all labour, material and t&p etc. ( l.m.r ) ...

Saharanpur Municipal Corporation - Uttar Pradesh

37027920 supply of general material 1 2 plain fabric for bags towel heavy full size 6x3 3 towel medium size 4 1/2 x22/2 4 towel head small 22″x11/2″ 5 bedsheet with double bed pillow cover bedsheet single bed 6 7 cotton washes are great for cleaning 8 curtains full size 9x4 9 curtain small size 7x4 10 mattress high quality thickness 03 11 , mattress high quality thickness 04 12 , comforter high quality thickness 03 13 pillow high quality 01 to 1.5 kg 14 , mattress cover full size high quality 15 quilt cover full size high quality 16 17 pillow cover high quality barsati full size high quality 18 towel wash heavy full size 6 x 3 19 towel wash medium size 42/2x22/22 20 towel head small 22/2x11/2 21 bedsheet washing double bed with pillow covers 22 bedsheet dhalai single bed 23 curtains wash large 24 , curtain washing medium 25 pillow cover washing mattress cover dhalai fruit size 26 27 28 , quilt cover dhalai fruit sai... 29 mink / soft blanket single bed (weight 02 to 2.25 kg) mink / soft blanket double bed (weight 2.75 to 03 kg) 30 | double sided all wool blanket standard quality weight 2.60 to 2.80kg size: 2.40x1.50 mtr 31 headwash bada dettol / lifebuoy 150 to 200 ml 32 naplin goli 100g packet 33 dettol soap 100 125 grams 34 , notch jute big 35 , notch jut medium 36 big in notch clothes 37 , medium in notch clothing 38 wall clock 24 high quality 39 wood carving wall clock 12 40 wood coving wall clock 18 41 42 wood carving wall clock 24 bathroom brush heavy quality 43 phenyl bottle marigold 01 44 acid bottle 01 liter 45 watch cell 46 bell cell 47 electric doorbell cordless cona/anchor/havells etc. 48 water cooler 15 ltr salon / milton 49 harpic / saniface 01 l0 50 room fashioner large 175 to 200 ml airwick /godrej / odonil automatic room fashioner 200 250ml airwick/godrej / odonil 51 52 | spin mop set with bucket milton / cello / scoth brite etc. 53 pocha big 54 wiper big crown 55 wiper small crown 56 , touch large power charging 57 black hit big 600 650ml 58 tala neeraj k0 65mm 59 , lock neeraj k0 75 mm 60 , lock godrej k0 65mm 61 lock godrej k075mm lock link k0 65 mm 62 63 lock link a0 75 mm 64 big umbrella 65 , milton / nyasha / salons dustbin with lid 66 , dustbin khala milton / nayasha / salon 67 dustbin steel big 12 to 15 liters 68 , plastic bucket 20 ltrs with mug milton / salon 69 plastic jug 02 ltr salon / milton 70 71 , phool jhadu rose wali seek broom heavy quality 72 jaw plastic 73 , electric kettle 02 ltr pasties/salon / milton , electric kettle 01 l pasties / salon / milton 74 75 audonil 75g 76 allout / goodnight 77 colin 500 ml 78 cup plate set golden bone china vip clay craft co / borosil / any co. 79 full size milton / nyasha / salon 80 medium size milton / nayasha / salon 81 tray small size milton / nayasha / salon 82 glass glass set salon / milton / april green / nayasha 83 spoon steel heavy quality 01 dozen 84 steel glass heavy quality 06 pieces 85 glass box glass 48 pieces 86 coaster steel heavy quality 06 piece set 87 , coasters plastic 06 piece set 88 hot kettle steel body 500ml milton / salon 89 hot kettle steel body 01 l0 milton / salon 90 hot kettle steel body 02 l0 milton / salon 91 hot kettle steel body 05 ltr milton / salon 92 plate breakfast wali 08 04 piece set honest 93 , plate snack wali 08 06 piece set plastic salon / milton 94 , plate breakfast 11 06 piece set plastic salon / milton 95 aluminum ladder fit 08 to 09 96 aluminum ladder 10 to 12 feet 97 bowl 06 set salon / milton/nyasha 98 , plastic bottle 06 set milton / salon 99 , steel bottle 01 l milton / salon 100 steel bottle 500ml milton / salon 101 vacuum cleaner small forbes 1200 1400 watts 102 vacuum cleaner small forbes 1200 1400 watts...

Water And Sanitation Committee - Uttar Pradesh

37011095 tender for empanelment of agency s for event planning and management 2 breakfast 3 assorted pakora / mixed pakora ( choose any one ) , cutlet / bread pakora ( choose any one ) , coleslaw sandwiches / vegetable & chutney sandwich ( choose any one ) , tea & coffee 4 bread roll / moong dal wada ( choose any one ) , vegetable spring roll / crispy chilli potatoes ( choose any one ) , corn sandwich / mushroom sandwich ( choose any one ) , tea & coffee 5 pav bhaji / patila matar kulcha ( choose any one ) , vegetable chop / idli chilli ( choose any one ) , bun butter / burger ( choose any one ) , tea & coffee 6 lunch 7 main course 8 kadhai paneer / matar paneer ( choose any one ) 9 dum aloo banarsi / dum aloo kashmiri ( choose any one ) 10 mix vegetable / veg jhalfrezi ( choose any one ) 11 stuffed tawa / stirfried vegretable ( choose any one ) 12 ( karela, shimla, tomato, baigan ) 13 punjabi chholey / punjabi kadhi ( choose any one ) 14 arhar dal fried / mixed dal ( choose any one ) 15 pea pulao / dumpulao ( choose any one ) 16 zeera rice / steamed rice ( choose any one ) 17 achar, chutney & papad 18 breads 19 tandoori roti 20 nan & missi 21 poori & kachori 22 salad 23 fresh green salad 24 yogurt 25 kheera & tomato raita / pudina raita ( choose any one ) 26 dessert 27 gulab jamun / moong dal halwa ( choose any one ) 28 main course 29 paneer butter masala / handi paneer ( choose any one ) 30 dum aloo calcatia / aloo posto ( choose any one ) 31 gobhi aloo / aloo parwal ( choose any one ) 32 stuffed tawa / saute veg ( choose any one ) 33 rajma / kala chana nutri masala ( choose any one ) 34 dal masoor masala / dal makhani ( choose any one ) 35 vegetable pulao / dum biryani ( choose any one ) 36 steamed rice / jeera rice ( choose any one ) 37 achar, chutney & papad 38 breads 39 tandoori roti 40 nan & missi 41 poori & kachori 42 salad 43 fresh green salad 44 yogurt 45 lauki raita / boondiraita ( choose any one ) 46 dessert 47 milk pudding bonanza / lal mohan ( choose any one ) 48 main course 49 chilli paneer / paneer hussaini ( choose any one ) 50 baigan aloo chokha / aloo palak ( choose any one ) 51 aloo shimla / lauki kofta ( choose any one ) 52 veg keema kaleji / veg kebab ( choose any one ) 53 pindi chana / sindhi kadhi ( choose any one ) 54 sal sabut masoor / dal sarfeda ( choose any one ) 55 kathal pulao / lemon rice ( choose any one ) 56 steamed rice / jeera rice ( choose any one ) 57 achar, chutney & papad 58 breads 59 tandoori roti 60 nan & missi 61 poori & kachori 62 salad 63 fresh green salad 64 yogurt 65 mixed veg raita / aloo raita ( choose any one ) 66 dessert 67 hot emarti / moong dal halwa ( choose any one ) 68 hi tea 69 hi tea vvip 70 dry fruits 71 paneer pakora / kalmi wada ( choose any one ) 72 fruit tarts / pineapple pastry ( choose any one ) 73 green pea lemoni / poha ( choose any one ) 74 olive sandwich / 3 pepper sandwich ( choose any one ) 75 fruit basket 76 cheese stuffed cutlet / mushroom cutlet ( choose any one ) 77 coleslaw sandwich / vegetable sandwich ( choose any one ) 78 wafers 79 variety of tea 80 coffee 81 juices 82 hi tea general 83 tea & coffee 84 veg sandwich / potato & cucumber sandewich ( choose any one ) 85 samosa / sindhi khasta ( choose any one ) 86 hi tea vvip 87 dry fruits 88 babycorn fritters / paneer shashlik ( choose any one ) 89 black forest pastry / fruit cake ( choose any one ) 90 cheese straw / corn masala ( choose any one ) 91 carrot & beans sandwich / capsicum & corn sandwich ( choose any one ) 92 fruit basket 93 aloo bonda / barule ( choose any one ) 94 coleslaw sandwich / cheese sandwich ( choose any one ) 95 wafers 96 variety of tea 97 coffee 98 juices 99 hi tea general 100 tea & coffee 101 corn sandwich / vegetable sandwich ( choose any one ) 102 bread pakora / bread roll ( choose any one ) 103 hi tea vvip 104 dry fruits 105 bird nest / paneer tikka ( choose any one ) 106 cup cake / canopies ( choose any one ) 107 mini dal samosa / methi puff ( choose any one ) 108 assorted sandwich sandwich / open sandwich ( choose any one ) 109 fruit basket 110 ram laddu / jodhpuri mirch ( choose any one ) 111 coleslaw sandwich / cheese sandwich ( choose any one ) 112 wafers 113 variety of tea 114 coffee 115 juices 116 hi tea general 117 tea & coffee 118 assorted sandwich / mint & myo sandwich ( choose any one ) 119 medu wada / potato and palak cutlet ( choose any one ) 120 lunch packet / dinner packet 121 paneer veg 1 122 seasonal dry veg 1 123 dal 1 124 roti 2 125 rice 1 cup 126 achar sachet 1 127 indian dessert 1 128 napkin 1 129 spoon 1 130 salad stick 1 131 drinking water 132 branded & isi mark drinking water bottle 250ml 133 branded & isi mark drinking water bottle 500ml 134 branded & isi mark drinking water bottle 1000ml 135 stage and floor management 136 wooden raiser 137 platform for led 138 electronic media stage 139 all side skirting 140 wooden flooring 141 leatherite sofa set 142 non woven synthetic carpet 143 swiss cottage 144 executive toilet setup with modern fitting for vvip 145 banquet chair 146 pvc chair 147 royal q manager 148 water counter 149 1.5ht height stage railing withs.s pipe 150 pre fabricated fabric panel wall 151 pandal 152 fabric masking 153 pantry setup for vvip 154 water proof pre fabricated pagoda canoppy 155 mozo barricading 156 customised barricading 157 vvip lounge setup 158 vvip deluxe chair 159 frisking room 160 table with leg cover of fancy cloth 161 pre fabricated center table / coffee table 162 2.5ft height heavy iron scaffold stage 163 steps with railing 164 vvip leatherite sofa set 165 high long multi color flag 166 deepdan 167 leather finished vvip chair for dias 168 scaffold tower 169 main dias setup 170 chandani 171 dari 172 glass table 173 table cloth 174 pole cover 175 tirpal 176 foam gadda 177 kaleen 178 pavdan 2ftx4ft 179 moulded chair with armed 180 moulded chair without armed 181 stage for artist 182 steel chair 183 sofaset three seater 184 washbasin stand 185 drum 186 tub plastic 187 tub iron 188 bedsheet 189 parda 190 round table big 191 round table big cover normal 192 round table big cover sotton 193 big umbrella 194 small umbrella 195 led counter 196 german hanger pandal 197 m.s truss pandal 198 balli barricading 199 view cutter wall 200 iron or ss railing 201 registration counter 202 octonom stall 203 president chair for stage 204 dustbin with cover 205 balli barrier 206 jute matting 6ftx36ft 207 stall double table on pipe 208 stall double table on wrought iron 209 takhat 210 flower pot 211 artificial grass carpet 212 momento small 213 momento medium 214 mommento big 215 decore 216 fresh flower garden type decoration with exotic englishflower, marrygold, green leave lari decoration at main stage and backdrop. 217 vvip bouquet 218 complete fresh flower genda lari decoration at d area 219 genda lari mala 220 vvip fresh tata rose & rajni gandha mala 221 fresh tata rose & genda lari mala 222 rose loose flower 223 vvip flower vase 224 podium decoration 225 main plaza entrance genda lari decoration 226 draping with cloth decoration in two clour 227 rose buds 228 branding 229 complete main stage backdrop on black back heavy gsm pvc flex media with designing, mounting and fixing 230 main plaza box type gate with three pillar on black back heavy gsm pvc flex media with designing, mounting and fixing 231 podium logo on black back heavy gsm pvc flex media with designing, mounting and fixing 232 standy on black back heavy gsm pvc flex media with designing, mounting and fixing at main plaza gate 233 electrical, air conditioner and power supply ( silent diesel generator ) 234 halogen fitting 235 led metalight 236 spot light 237 led parcan 238 hiring of 10 / 16 / 25mm single core main line & distribution line 239 hiring of 10 / 16mm four core main line & distribution line 240 hiring of distribution board 241 hiring of change over main switch 32 / 63 amp t.p.n 242 hiring of change over main switch 100 / 200 amp t.p.n 243 hiring of panel board 100 amp & distribution line circuit connection 244 genset with fuel 125 kva 245 genset with fuel – 62 kva 246 genset with fuel – 25 kva 247 genset with fuel 15 kva 248 genset with fuel 10 kva 249 genset with fuel 5 kva 250 hiring of air circulator fan 24 251 hiring of padestal fan 16 size 252 hiring of ceiling fan 253 hiring of desert cooler ( vediocon plastic ) 254 ( a ) split 255 hiring of air conditioner ( 1.5ton ) window type 256 hiring of air conditioner ( 1.5ton ) split type 257 hiring of tower air conditioner ( 2 ton ) split type 258 hiring of fitting and operating chatges of heavy duty 5 ton tower air conditioner complete with pipe, gas etc. 259 hiring of a.c copper pipe line 260 hiring of 30amp socket point for a.c 261 technical sound 262 hire and fitting charges of public address system with jbl speaker, horns mic podium for auditorium 263 hire and fitting charges of public address system with jbl speaker, horns mic podium for pandal 264 hire and fitting charges of public address system with horns mic podium with battery backup 265 podium 266 necessary cabling and equipment for live video telecasting 267 technical video equipment 268 led wall p3 8x6 269 one live video mixer 270 switcher 271 intregated networking cabeling as per need 272 leaseline 100mbps 273 stationary items 274 jute folder 275 ball pen 276 slip pad 25 page...

Indian Army - Uttar Pradesh

37002868 bids are invited for 1 f1 5110 000317 planes jack iron 56mm single cut 2 f1 5110 000787punches spring complete 280mm length 3 f1 5110 000407 rasp cabinet bastard cut nominal length 300mm 4 f1 5110 000231 shears tinmans scotch 400mm 5 f1 5210 000045 rules folding 600mm 6 f1 5120 001354 nails pullers 7 f1 5120 000991 bars crow chisel & claw ends 1070 29m 8 f1 5133 000228 bits braces carpenters counter sunk rose 16 mm dai 9 f1 5120 001142 hammer smith 1360gm complete fitted with handle 10 f1 5120 000030 hammers tinman’s paining down 450gms complete fitted with handle 11 f1 5120 000319 spanners socket handles sliding bar ‘t’ ¾’ sq drive 16 13 16 dia bar 12 f1 5120 002220 spanner socket bihe american & unified ¾” sq drive a f size american in 13 f1 5120 001584 spanners ring bihe double end cranked american & unified a f size american 1 1 4 1 7 16 unified 1 100 125 144 total quantity : 10780...

Medical Health And Family Welfare - Uttar Pradesh

36963348 bids are invited for 1 electrical matterial supply supply of 6 amp f / t switch. 2 electrical matterial supply supply of 6 amp 3 pin socket. 3 electrical matterial supply supply of 6 amp 2 pin socket. 4 electrical matterial supply supply of 6 amp ceiling rose . 5 electrical matterial supply supply of 16 amp switch & 16 ampsocket combined power plug . 6 electrical matterial supply supply of electrical bell . 7 electrical matterial supply supply of ding dong electric bell. 8 electrical matterial supply supply of remote bell. 9 electrical matterial supply supply of electricalburzer . 10 electrical matterial supply supply of a.c top metalic. 11 electrical matterial supply supply of 36 watt. copper choke electronic. 12 electrical matterial supply supply of 16 / 6 amp. combined gang box. 13 electrical matterial supply supply of capacitor 4 mfd / 400 volt / 240 v. 14 electrical matterial supply supply of capacitor 3.15 mfd / 400 volt / 240 v . 15 electrical matterial supply supply of capacitor / condenser 2.5 mfd / 400 volt / 240 v . 16 electrical matterial supply supply of 23 / 0076 round trs two core copper wire. 17 electrical matterial supply supply of 23 / 0076 round trs three core copper wire. 18 electrical matterial supply supply of 40 / 0076 round trs three core copper wire. 19 electrical matterial supply supply of 23 / 0076 flexible copper wire . 20 electrical matterial supply supply of 40 / 0076 flexible copper wire . 21 electrical matterial supply supply of 1.5 sq mm pvc insulated / sheathed copper wire single core . 22 electrical matterial supply as item 21 but for 2.5 sq. mm wire. 23 electrical matterial supply as item 21 but for 4.0 sq. mm wire . 24 electrical matterial supply supply of 6 sq. mm copper wire. 25 electrical matterial supply supply of 10 sq. mm copper wire . 26 electrical matterial supply supply of pvc gulli size 50x12mm. 27 electrical matterial supply supply of 10 sq. mm 2 core unarmoured aluminium cable . 28 electrical matterial supply supply of 16 sq. mm 2 core unarmoured aluminium . 29 electrical matterial supply supply of dril machine. 30 electrical matterial supply supply of tool kit. 31 electrical matterial supply supply of screw 35x8 . 32 electrical matterial supply supply of pvc clip 5, 6, 8 mm. 33 electrical matterial supply supply of kettle element 1.5 / 2.0 kw. 34 electrical matterial supply supply of 20watt / 23watt led tube fitting complete. 35 electrical matterial supply supply of fuses wire silver coated 100 amp. 36 electrical matterial supply supply of fuses wire silver coated 63 amp. 37 electrical matterial supply supply of pvc tape roll 3 / 4 inches . 38 electrical matterial supply supply of empire tape roll 3 / 4 inches. 39 electrical matterial supply supply of 1 / 2 dia cotton branded rubber pipe. 40 electrical matterial supply supply of 1 / 2 inches dia plastic pipe heavy thickness. 41 electrical matterial supply supply of8x4ft size hard board of heavy thickness. 42 electrical matterial supply supply of 16 amp 3 pin plug top . 43 electrical matterial supply supply of 6 amp 2 pin plug top . 44 electrical matterial supply supply of 6 amp 3 pin plug top . 45 electrical matterial supply supply of room heater single rod. 46 electrical matterial supply supply of room heater double rod. 47 electrical matterial supply supply of halogen heater double rod. 48 electrical matterial supply supply of halogen heater three rod. 49 electrical matterial supply supply of double carbonrod heater . 50 electrical matterial supply supply of room heater rod with element. 51 electrical matterial supply supply of 0 watt / 0.5 watt led bulb. ( coloured ) 52 electrical matterial supply supply of metalic mcb switch6 amp. / 10 amp / 16 amp / 20 amp / 32 amp. 53 electrical matterial supply supply of earth metal clad socket 20 amp. 54 electrical matterial supply supply of bell push 6 amp. 55 electrical matterial supply supply of heat convector / blower auto control . 56 electrical matterial supply supply of electric kettle 1.5 ltr. 57 electrical matterial supply supply of extension board 16 / 6 amp. for power 3 socket . 58 electrical matterial supply supply of extension board 16 / 6 amp. for power 4 socket . 59 electrical matterial supply supply of extension board 6 amp. for 4 socket . 60 electrical matterial supply supply of extension board 6 amp. for3 socket . 61 electrical matterial supply supply of fan regulator electronic. 62 electrical matterial supply supply of bed switch 6 amp. 63 electrical matterial supply supply of gang box 5 pin 6 / 16 amp. 64 electrical matterial supply supply of 60 watts / 100 watts bulbs. 65 electrical matterial supply supply of geezer 15 ltrs capacity . 66 electrical matterial supply supply of geezer 35 ltrs capacity 67 electrical matterial supply supply of 12 watt / 14 watt led bulb. 68 electrical matterial supply supply of 5 watts / 9 watts led bulb. 69 electrical matterial supply supply of 3 watt / 5 watt led coloured bulb. 70 electrical matterial supply supply of 1 hp submersible pump starter. 71 electrical matterial supply supply of 36 watt led fitting choke. 72 electrical matterial supply supply of 30watts led street light. 73 electrical matterial supply supply of 45 watts led street light . 74 electrical matterial supply supply of 90 watts led street light . 75 electrical matterial supply supply of oil heater ( radiator ) 9 fins. 76 electrical matterial supply supply of oil heater ( radiator ) 11 fins. 77 electrical matterial supply supply of 18 watt led fitting choke. 78 electrical matterial supply supply ofisolator 63 amp. two pole . 79 electrical matterial supply supply of 4 40 watts fluorescent tube rod. 80 electrical matterial supply supply of submersible pump for room cooler . 81 electrical matterial supply supply of ceiling fan 36” . 82 electrical matterial supply supply of ceiling fan 48” . 83 electrical matterial supply supply of exhaust fan 12” of 1400 rpm . 84 electrical matterial supply supply of exhaust fan 15” of 1400 rpm . 85 electrical matterial supply supply of exhaust fan 18” of 1400 rpm . 86 electrical matterial supply supply of wall fan 16”. 87 electrical matterial supply supply of room cooler with 15” exhaust fan of 1400 rpm, water tank of heavy gauge g.i. sheet . 88 electrical matterial supply supply of room cooler with 18” exhaust fan of 1400 rpm, water tank of heavy gauge g.i. sheet . 89 electrical matterial supply supply of geezer6 ltr. capacity . 90 electrical matterial supply supply of 1.5 hp / 2.0 hpsingle phase submersible pump starter. 91 electrical matterial supply supply of5 hp3 phasesubmersible pump starter. 92 electrical matterial supply supply of 7.5 hp / 10. hp 3 phasesubmersible pump starter. 93 electrical matterial supply supply of 1.5 hp / 2.0 hp submersible pump motor single phase. 94 electrical matterial supply supply of5 hp submersible pump motor 3 phase. 95 electrical matterial supply supply of7.5 hp submersible pump motor 3 phase. 96 electrical matterial supply supply of10 hp submersible pump motor 3 phase. 97 electrical matterial supply supply of 1.5 sq.mm. glass wire copper. 98 electrical matterial supply supply of6 amp. pendent holder. 99 electrical matterial supply supply of 6 amp. multi plug. 100 electrical matterial supply supply of thermostate of blower heater. 101 electrical matterial supply supply ofaa battery. 102 electrical matterial supply supply of 18 watt. led bulb. 103 electrical matterial supply supply of 20 watt. led bulb. 104 electrical matterial supply supply ofmetalica.c plug top 3 pin....

Department of Defence Production - Uttar Pradesh

36956485 bids are invited for 21; 1hhalf round bastard 150mm (6 ) make j. k files (superdrive) itm (dagger brand) v3 toolsescon (ro (q3) , file sqr second cut 10 make j. k. files (superdrive) itm (dagger brand) v3 toolsescon (rose brand (q3) , file rd bastard 8 make j. k. files (superdrive) itm (dagger brand) v3 toolsescon (rose brand) (q3) , file flat bastard 350mm (14 ) s make j. k. files (superdrive) itm (dagger brand) v3 toolsescon (ro (q3) mse total quantity : 183...

Department of Defence Production - Uttar Pradesh

36956484 bids are invited for file sqr. bastard 100mm (4 ) make j. k. files (super drive) itm (dagger brand) v3 toolsescon rose bra (q3) , file sqr. bastard 200mm (8 ) make j. k. files (superdrive) itm (dagger brand) v3 tools escon (rose b (q3) , file flate bastard 100 mm (4 ) make j. k files (superdrive) item (dagger brand) v3 tools escon (ros (q3) , file round bastard 300mm (12 ) make j. k. files (superdrive) item (dagger brand) v3 toolsescon (rose (q3) mse total quantity : 392...

State Urban Development Agency - Uttar Pradesh

36948528 furniture, networking and electrification work of e governance sell at tahsil farenda 1 providing and fixing fal ceiling of specified material? mm thick fully perforated calcium silicate board made wih cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225kg / sq.cm bending strength 100kg / sq.cm etcl. d.s.r. 12.58.1page no 222 2 providing and apply plaster of paris pooty of 2mm thickness over plastered surface to prepare the surface even and smooth complete as per d.s.r 13.26. 3 applying one coat of cement primer of approved brand and manufacture on wall surface.13.43.1 4 wax polishing a new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including supply of all materials labour and t&p etc.required for proper completion of work.as per sr. no. 13.69 5 s / f of wall panelling with 2 x 1.5 wood section type frame work cladded with 12 mm ply final surface with finished with laminated with complete with painted or polished. as per approved designer completed as per drawing specification and direction of engineer in charge. dsr 26.6e 2 6 s / f of computer table having top 0.80mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 7 s / f of conference table having top 0.90mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 8 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours land shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 course sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. dsr.no.11.14.2 9 sign board with panelboard with transperent glass in lokvani karyalay.including all material and labour t&p etc.required for proper complition of the work. 10 wirng point for fan / fresh air light 1sq mm freesh pvc insulated mitistrand single core copper conductor cable in heavy gauge rigid stvel condult pip concealed in the wall complete with 14 swg copper earth continuity, wire, plano type switch & ceiling rose / angle button holder on 3mm thick phenolic laminated backlight sheet etc. complete all respect as s., no 133 ( b ) p 62 11 wirng point for hpmv / sodium / led vepour lamp 6with 1.5 sq mm fresh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire, 15 amp piano type switch 3mm thick phenolic laminated backlight sheet etc. complete in all respect as 5.1. no 136 ( b ) p 64 12 wiring point for plug with 1.5 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 13 wiring point for mcb with 1 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 14 endura slim pro plus 4 2*2 plr 28 / 36 w.led 840 mod., with starter led drive r36v36ws havells. ( hanging light ) 15 led light lumeno 6 squair 600k havells 16 s / f of wall fan 17 s / f of exast fan 18 profile light 19 router 20 networking ...

State Urban Development Agency - Uttar Pradesh

36948329 furniture, networking and electrification work of e governance sell at tahsil nichlaul 1 providing and fixing fal ceiling of specified material? mm thick fully perforated calcium silicate board made wih cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225kg / sq.cm bending strength 100kg / sq.cm etcl. d.s.r. 12.58.1page no 222 2 providing and apply plaster of paris pooty of 2mm thickness over plastered surface to prepare the surface even and smooth complete as per d.s.r 13.26. 3 applying one coat of cement primer of approved brand and manufacture on wall surface.13.43.1 4 wax polishing a new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including supply of all materials labour and t&p etc.required for proper completion of work.as per sr. no. 13.69 5 s / f of wall panelling with 2 x 1.5 wood section type frame work cladded with 12 mm ply final surface with finished with laminated with complete with painted or polished. as per approved designer completed as per drawing specification and direction of engineer in charge. dsr 26.6e 2 6 s / f of computer table having top 0.80mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 7 s / f of conference table having top 0.90mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 8 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours land shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 course sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. dsr.no.11.14.2 9 sign board with panelboard with transperent glass in lokvani karyalay.including all material and labour t&p etc.required for proper complition of the work. 10 wirng point for fan / fresh air light 1sq mm freesh pvc insulated mitistrand single core copper conductor cable in heavy gauge rigid stvel condult pip concealed in the wall complete with 14 swg copper earth continuity, wire, plano type switch & ceiling rose / angle button holder on 3mm thick phenolic laminated backlight sheet etc. complete all respect as s., no 133 ( b ) p 62 11 wirng point for hpmv / sodium / led vepour lamp 6with 1.5 sq mm fresh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire, 15 amp piano type switch 3mm thick phenolic laminated backlight sheet etc. complete in all respect as 5.1. no 136 ( b ) p 64 12 wiring point for plug with 1.5 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 13 wiring point for mcb with 1 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 14 endura slim pro plus 4 2*2 plr 28 / 36 w.led 840 mod., with starter led drive r36v36ws havells. ( hanging light ) 15 led light lumeno 6 squair 600k havells 16 s / f of wall fan 17 s / f of exast fan 18 profile light 19 router 20 networking ...

State Urban Development Agency - Uttar Pradesh

36948288 furniture, networking and electrification work of e governance sell at navtanwa 1 providing and fixing fal ceiling of specified material? mm thick fully perforated calcium silicate board made wih cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225kg / sq.cm bending strength 100kg / sq.cm etcl. d.s.r. 12.58.1page no 222 2 providing and apply plaster of paris pooty of 2mm thickness over plastered surface to prepare the surface even and smooth complete as per d.s.r 13.26. 3 applying one coat of cement primer of approved brand and manufacture on wall surface.13.43.1 4 wax polishing a new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including supply of all materials labour and t&p etc.required for proper completion of work.as per sr. no. 13.69 5 s / f of wall panelling with 2 x 1.5 wood section type frame work cladded with 12 mm ply final surface with finished with laminated with complete with painted or polished. as per approved designer completed as per drawing specification and direction of engineer in charge. dsr 26.6e 2 6 s / f of computer table having top 0.80mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 7 s / f of conference table having top 0.90mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 8 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours land shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 course sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. dsr.no.11.14.2 9 sign board with panelboard with transperent glass in lokvani karyalay.including all material and labour t&p etc.required for proper complition of the work. 10 wirng point for fan / fresh air light 1sq mm freesh pvc insulated mitistrand single core copper conductor cable in heavy gauge rigid stvel condult pip concealed in the wall complete with 14 swg copper earth continuity, wire, plano type switch & ceiling rose / angle button holder on 3mm thick phenolic laminated backlight sheet etc. complete all respect as s., no 133 ( b ) p 62 11 wirng point for hpmv / sodium / led vepour lamp 6with 1.5 sq mm fresh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire, 15 amp piano type switch 3mm thick phenolic laminated backlight sheet etc. complete in all respect as 5.1. no 136 ( b ) p 64 12 wiring point for plug with 1.5 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 13 wiring point for mcb with 1 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 14 endura slim pro plus 4 2*2 plr 28 / 36 w.led 840 mod., with starter led drive r36v36ws havells. ( hanging light ) 15 led light lumeno 6 squair 600k havells 16 s / f of wall fan 17 s / f of exast fan 18 profile light 19 router 20 networking ...

Department of Defence Production - Uttar Pradesh

36947765 bids are invited for file tranglur bastard 300mm (12 ) make j. k files (superdrivr) itm(dagger brand) v3 toolsescon (rose (q3) , file rd second cut 100mm(4 ) make j. k. files (superdrive) item (dagger brand) v3 toolsescon (rose (q3) , file flat bastard 300mm (12 ) make j. k files (superdrive) itm (dagger brand) v3 toolsescon (rose br (q3) , file half round bastard 300mm (12 ) make j. k. files (superdrive itm (dagger brand) v3 tools escon ( (q3) mse total quantity : 394...

Department of Defence Production - Uttar Pradesh

36947754 bids are invited for file diamond coated round 150mm(6 ) make j. k. files (superdrive) itm (dagger brand) v3 toolsescon ( (q3) , file sqr. bastard 250mm (10 ) make j. k. files (superdrive) itm (dagger brand) v3 tools escon (rose (q3) mse total quantity : 164...

State Urban Development Agency - Uttar Pradesh

36947085 furniture, networking and electrification work of e governance sell at tahsil sadar, mahrajganj. 1 providing and fixing fal ceiling of specified material? mm thick fully perforated calcium silicate board made wih cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225kg / sq.cm bending strength 100kg / sq.cm etcl. d.s.r. 12.58.1page no 222 2 providing and apply plaster of paris pooty of 2mm thickness over plastered surface to prepare the surface even and smooth complete as per d.s.r 13.26. 3 applying one coat of cement primer of approved brand and manufacture on wall surface.13.43.1 4 wax polishing a new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including supply of all materials labour and t&p etc.required for proper completion of work.as per sr. no. 13.69 5 s / f of wall panelling with 2 x 1.5 wood section type frame work cladded with 12 mm ply final surface with finished with laminated with complete with painted or polished. as per approved designer completed as per drawing specification and direction of engineer in charge. dsr 26.6e 2 6 s / f of computer table having top 0.80mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 7 s / f of conference table having top 0.90mtr & height 0.75mtr with 19mm ply& 1 mm mica, of approved quality & is! make including painting & polishing as required. as per direction engineer in charge 6.00 including supply of all material. labour t&p etc. required for proper completion of the work. as per se approved rate 8 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours land shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 course sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. dsr.no.11.14.2 9 sign board with panelboard with transperent glass in lokvani karyalay.including all material and labour t&p etc.required for proper complition of the work. 10 wirng point for fan / fresh air light 1sq mm freesh pvc insulated mitistrand single core copper conductor cable in heavy gauge rigid stvel condult pip concealed in the wall complete with 14 swg copper earth continuity, wire, plano type switch & ceiling rose / angle button holder on 3mm thick phenolic laminated backlight sheet etc. complete all respect as s., no 133 ( b ) p 62 11 wirng point for hpmv / sodium / led vepour lamp 6with 1.5 sq mm fresh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 14 swg copper earth continuity wire, 15 amp piano type switch 3mm thick phenolic laminated backlight sheet etc. complete in all respect as 5.1. no 136 ( b ) p 64 12 wiring point for plug with 1.5 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 13 wiring point for mcb with 1 sq mm frlesh pvc insulated multistrand single core copper conductor cable in heavy gauge rigid steel condult pipe concealed in the wall complete with 8 swg gi earth continuity wire, piano type switch & socket etc. complete in all respect as s.i. no 1348 2 63 14 endura slim pro plus 4 2*2 plr 28 / 36 w.led 840 mod., with starter led drive r36v36ws havells. ( hanging light ) 15 led light lumeno 6 squair 600k havells 16 s / f of wall fan 17 s / f of exast fan 18 profile light 19 router 20 networking ...

Veer Bahadur Singh Purvanchal University - Uttar Pradesh

36930342 tender for supply of electrical equipments 2 changer over switch 3 phase 200 amp havells 3 changer over switch springl phase 63 amp havells 4 condenser 2.5 mfd 5 dolder pendant anchor 6 ceiling fan bajaj / philips 7 ale. i. d. bulb 14 watt bajaj / philips 8 l.e.d. bulb 18 watt bajaj / philips 9 led bulb 9w bajaj / philips 10 led bulb 7 watt bajaj / philips 11 mcb 100 mpl 3 phase 12 l.e.d. bulb 27 watt bajaj / philips 13 ale. i. d. bulb 30w bajaj / philips 14 , ale. i. d. tubelight 20w bajaj / philips 15 road street l. i. d. light 100 watt bajaj / philips 16 led road street light 60 watt bajaj / compton 17 led road street light 120w bajaj / compton 18 3 pin 36 watt philips 19 switch a piano type 5 ampere anchor 20 modular switch 5 amp 21 board 8x10 22 board 7x4 23 board 10x12 24 , copper wire 3 / 20 havells socket 5 amp anchor socket 5 ampere modular anchor 25 26 27 greece 28 mobil servo main switch 100 ampere havells copper wire 40 / 76 havells power switch 15 amp anchor power switch 15 amp modular anchor , power socket 15 amp anchor power socket 15 ampere modular anchor combined 15 ampere anchor combined 15 ampere modular anchor 37 , copper wire 0.75 mm havells 38 copper wire 1 mm havells 39 copper wire 15 mm havells , copper wire 25 mm havells copper wire 4 mm havells copper wire 6 mm havells copper wire 10 mm havells 44 copper wire 16 mm havells , copper wire 1.5 mm three phase havells mcb 6 ampere havells 47 mcb 16 ampere havells 48 mcb 25 amp havells 49 m.c.b. 32 amp havells 50 50 mcb 63 ampere havells 51 isolator 63 ampere three phase 52 holder button anchor 53 plug top 5 amp anchor 54 plug top 15 amp anchor 55 switch 5 amp anchor 56 ceiling seat ( 2 x 2 ) white 57 halogen light 1000 watt rod philips 58 sport bulb modern light ( suiting range ) 59 suiting light glass modern light ( for stage ) 60 slow night bulb magnet floor counter 61 magnet transformer floor counter 62 wrench set 63 pedestal fan bajaj / usha / orient 64 wall fan bajaj / usha / orient 65 table fan bajaj / usha / orient 66 exide fan 18 inch bajaj / usha / orient plas big and small size taparia 67 68 , screwdriver 12 inch taparia 69 screwdriver 6 inch taparia 70 tester 71 chisel 12 inch 72 chisel 6 inch 73 safety bolt i.s. i 74 hammer 1 kg taparia 75 hammer 1 / 2 kg taparia 76 bed switch anchor 77 2 pay switch anchor 78 ac plugtop complete havells 79 multi meter 80 soldering iron paste ranga drill machine double gear 1000 watt 81 82 generator belt 83 ladder aluminum 5 feet 84 ladder aluminum 20 feet 85 , changer over 63 ampere 2 phase havells 86 , main switch 63 ampere single phase havells mcb box havells 87 88 kitkat fuse 63 amp anchor 89 gate light set 125 watt 90 raw rubber 91 pvc tape anchor 92 empire tape 93 cloth tape 94 slim light 20 watt and pabbar 95 , choke electronic philips 96 , hylogen rod 500 watt 97 halogen rod 1000 watt 98 steel screw 1 / 2 inch 99 steel screw 3 / 4 inch 100 steel screw 1 inch 101 steel screw 2 inch 102 mager 103 technometer 104 cable 6 square mm 2 core havells aluminum 105 , cable 10 square mm 2 core havells aluminum 106 cable 10 square mm 4 core havells aluminum 107 , cable 18 sq. m. m. 1 core havells aluminum 108 cable 16 square mm 2 core havells aluminum , cable 18 square mm 3 core havells aluminum 109 110 , cable 25 sq. mm. 1 core havells aluminum 111 , cable 25 sq. mm 2 core havells aluminum 112 cable 25 sq. mm. 35 core havells aluminum 113 , cable 35 sq. mm 1 core havells aluminum cable 35 sq. mm 2 core havells aluminum 114 115 , cable 35 sq. mm 3 core havells aluminum 116 cable 35 square mm 35 core havells aluminum 117 , cable 70 sq. mm 1 core havells aluminum 118 cable 70 sq. mm 2 core havells aluminum 119 cable 70 sq. mm 3 core havells aluminum 120 cable 70 square mm 35 core havells aluminum 121 , cable 95 sq. mm 1 core havells aluminum 122 cable 95 sq. mm 2 core havells aluminum 123 cable 95 sq. mm 3 core havells aluminum 124 cable 95 sq. mm 3.5 core havells aluminum 125 , cable 120 sq. mm 1 core havells aluminum 126 , cable 120 sq. mm 2 core havells aluminum 127 cable 120 sq. mm 3 core havells aluminum 128 cable 120 sq. mm 35 core havells aluminum 129 cable 150 sq. mm 1 core havells aluminum 130 , cable 150 sq. mm 2 core havells aluminum 131 cable 150 sq. mm 3 core havells aluminum 132 , cable 150 sq. mm 35 core havells aluminum 133 , cable 240 sq. mm 1 core havells aluminum 134 , cable 240 sq. mm 2 core havells aluminum 135 , cable 240 sq. mm 3 core havells aluminum 136 , cable 240 sq. mm 3.5 core havells aluminum 137 , cable 400 sq. mm 1 core havells aluminum 138 , cable 400 sq. mm 2 core havells aluminum 139 , cable 400 sq. mm 3 core havells aluminum 140 cable 400 sq. mm 35 core havells aluminum 141 electronic fan regulator anchor 142 angle holder anchor 143 ceiling rose anchor...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

36888136 construction of 33 / 11 kv 2x5 mva gis based substation rajbhawan, lucknow including civil work and work of construction of associated 33 kv & 11 kv feeders on turnkey basis 1 33kv3x300 sq mm xlpe cable 2 33kv st / th c / j kit3x300 sq mm 3 33kvend termination o / door 3x300 sq mm 4 33 / 11 kv power t / f 5 mvaas per uppcl norms. 5 33 kv four way rmu as per t.s. annexed in tender document as per uppcl norma ( preferably m / s siemenn, m / s schneider, m / s abb make 6 33 kv i / door j / c kit 3x300 sqmm 7 11 kv o / door c / j kit 3x300 sq mm 8 11 kv i / door c / j kit 3x300 sq mm 9 24 volt battery set with battery charger 10 11 kv xlpe cable 3x300 sq mm 11 11 kv xlpe cable 3x185 sq mm 12 11 kv o / door c / j kit 3x185 sq mm 13 11 kv i / door c / j kit 3x185 sq mm 14 33 kv gis panel set ( 2i / c+1b / c+1 b / r+2 o / g ) as per t.s annexed in tender document / uppcl norms. ( preferablym / s siemenn, m / s schneider, m / s abb , m / s cgpisl make ) 15 11 kv gis panel set ( 2i / c+1b / c+1b / r+4 o / g ) as per t.s annexed in tender document / uppcl norms. ( preferablym / s siemenn, m / s schneider, m / s abb , m / s cgpisl make ) 16 stp 11 m long 17 33 kv pin insulator 18 33 kv pin with nut 19 ms angle 65x65x6 mm 20 top channel 125x65 sqmm 21 stay wire 7 / 8 swg 22 ms earth rod 20x2500 mm 23 ms pipe holding clamp 24 cable holding clamp 25 nut bolt with washer 26 cable marker 27 gi pipe 6 dia 28 hdpe pipe 160 mm dia 29 cu cable 6x2.5 sqmm 30 cu cable 4x2.5 sqmm 31 cu cable 2x2.5 sqmm 32 empire tape 33 pvc tape 34 ms round bar 32 mm 35 supply and fixing of suitable size of pregalvenized, powder coatedcable tray in control room / required place 36 providingand fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 37 cable stand with foundation 38 neutral stand structure with foundation 39 construction of power t / f plinth suitable for 33 / 11kv 5 mva power t / f of size 4x3x1.3 having 0.4 mtr height above ground level. the work includes excavation of foundation base concreting in cc ratio 1:6 mas 12 1st class brick work in ratio 1:4 with coarse sand , foundation cc in ratio 1:4:8using m.s bar of 12 mm dia for reinforcementthe work includes laying of 2 nos rail pieces 4 mtr long as per drawing / practice the plinth shall be finished in all respect. 40 construction of plinth suitable for33 kv, 04 way ring main unit size ( 1.5x1.0x1.0 m ) with civil material as per site requirement. 41 installation of complete lighting system for switchyard, control room building, main gate and sub station boundary including fans as per detailed technical specifications 42 painting of structures in ss 43 construction of fire wall, rccframed with fire bricksin between transformers ( 4.5x0.345x4.00 ) mtr 44 earthing of substation complete as per specification ( indoor earthing ) 45 earthing of substation complete by round bar 32 mm dia completeas per specification and connectin of all switchyard equipment by gi flat 50x6 mm ( outdoor switchyard earthing ) 46 rcc cable trench 850x800x150mm with cover as per drawing 47 control cable trench 12 wide 48 control cable trench cover 0.5 mtr long 49 pipe boring type earthing complete minimum 40 mtr deep from ground level complete job with connection of quipment by 50x6 mm gi strip 50 laying of11 kv 3x300 sq mm xlpe cable in constructed trench 51 fabrication, erection, grouting, plinthing & painting of double pole for 33 kvcable exposureon st. pole 11 mtr long with fixing of necessary clamp channel , angle 33 kv pin & pin insulator making double ckt 3 phase 3 wire bus bar for separate cablewith single core cable including electrode earthing , danger boared, barbed wire complete in all repectas per respo norms . 52 hoisting of3x300 sq mm sizes of33 kv single cable on existing / erected double pole including gi pipe 3 mtr long 6 dia including jumpering, dressing of cable with required all necessary clamps and nut, bolts. 53 fixing of cable marker on cable route and dipitching of feeder name and voltage onn cable marker for 33 kv cable. 54 laying of 11 kv 3x300 sq mmxlpe doublecableby digging of trench 1000 mm, deep, 750 mm wide its boxing with brick, sand, stone slabafter laying of cable separation of cable by brick wall up to stone slab filling and proper levelling & ramming. the ferruling of cable also include in this work. ( all the material shall be arranged bycontractor except 11 kv xlpe cable 3x300 sq mm ) 55 laying ofdouble ckt 33 kv 3x300 sq mm xlpe cablein digging of trench 1100 mm, deep, 650 mm wide its boxing with brick, sand, stone slabafter laying of cable separation of cable by brick wall up to stone slab filling and proper levelling& ramming. the ferruling of cable also include in this work 56 laying of 33 kv 3x300 sq mm xlpe cable in gi pipe size 150 mm diaby hdd method as per norms. the ferruling of cable also include in this work 57 laying of 33 kv 3x300 sq mm xlpe cable by drilling method in hdpe pipe 160 mm dia with drilling machine the cable shall be laid at the depth 1.5 mtr. to 3.00 mtr. from the surface of the road the cable shall be laid in such a manner that respo norms have been followed. 58 laying of33 kv 3x300 sq mm xlpe cable by drilling methodwith drilling machine the cable shall be laid at the depth 1.5 mtr. to 3.00 mtr. from the surface of the road the cable shall be laid ina manner that respo norms have been followed. 59 laying of double ckt 33 kv 3x300 sq mm xlpe cable in constructed trench 60 laying of 11 kv 3x185sq mm xlpe cable in existing constructed trench and proper dressing and ferruling. 61 laying of 11 kv 3x185 sq mm xlpe by digging of trench 900 mm, deep, 650 mm wide its boxing with brick, sand, stone slab after laying of cable separation of cable by brick wall up to stone slab filling and proper levelling & ramming.the ferruling of cable also include in this work. 62 laying of 11 kv 3x185 sq mm xlpe cable in hdpe pipe 160 mm dia by hdd method 63 laying of following sizes of 33 kv and 11 kv cables in cable tray with proper dressing of cable 64 33 kv xlpe cable 3x300 sq mm 65 11 kv xlpe cable 3x300 sq mm 66 11 kv xlpe cable 3x185 sq mm 67 fixing of cable marker on cable route and dipitching of feeder name and voltage on cable marker for 11 kv cable. 68 high pressure testing of 33 kv and 11 kv cables as per norms 69 hoisting, connection of following sizes of cables on existing / erected cable stand, distribution t / f, 33 kv rmu including jumpering, dressing of cable with required all necessary clamps and nut, bolts. 70 hoisting of 33 kv xlpe cable 3x300 sq mm single cable in33 kv rmu 71 hoisting of33 kv xlpe cable 3x300 sq mm single cable at cable stand 72 hoisting of11 kv xlpe cable 3x300 sq mm single cable in 11 kv gis pannel. 73 hoisting of11 kv xlpe cable 3x300 sq mm single cable at cable stand 74 hoisting of11 kv xlpe cable 3x185 sq mm single cable at cable stand 75 making heat & shrinkables joints of following size and types for xlpe cable by heat and shrinkables jointing kits. 76 33 kv3x300 sq mm xlpe o / d j / kit 77 33 kv st / th j / c kit 3x300 sq mm 78 33 kv i / d j / c kit 3x300 sq mm 79 11 kv3x185 sq mm xlpei / d j / kit 80 11 kv3x300 sq mm cable jointing kit i / d 81 11 kv3x300 sq mm cable jointing kit o / d 82 11 kv 3x185 sq.m.. xlpe o / d j / kit 83 t & p of sub station & switchgears including primary tools ( as per specification ) 84 4.5 kg. co2 fire extinguisher, portable type 85 5 kg. dry chemical powder fire extinguisher, portable type 86 fire buckets ( 4 nos. ) with stand filled with dry sand 87 rubber matting 20 sq. mm. thick size ( 1 x 2 mtr. ) 88 s / s name board ( smc ) with stand 89 protection board complete 90 supply of following auxiliary material 91 office table ( 1200x750x600 mm ) as per standard. 92 armed chair 93 notice board as per norms 94 key board 95 load chart board 96 line chart board 97 s / s board 98 civil work 99 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5m and lead upto 30m and including fitting, watering and ramming of excavated earth into the trenches or into the space between the building and insides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches. 100 river bed fine sand filling in plinth including supply of necessary quantity of fine sand from outside the uppcl premises including watering, dressing etc. rate to include cost of all materials, labour and t&p etc. required for proper completion of work. 101 earth filling under floors and / or corporation area including cost of earth obtainedwith in 8 km distance outside corporation area including all taxes ( if any ) andits carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. 102 levelling and dressing and making proper slopes including cuttingand filling of earth upto a depth 100mm if so required includingall labour t&p etc. required for proper completion of the work . 103 concrete with 4cm gauge i class brickballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. 104 concrete with 4cm gauge i class brickballast, coarse sandand cement in proportion of 10:5:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. 105 cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. 106 rcc work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granit, quartzite etc from dalla, jhansi or other quarries in proportion 1:2:4in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. ( csi no. 5.10 ) 107 concreting of 40 mm thick rcc trench covers in mild steel framework with rcc 1:1.5:3 in cement, coarse sand and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. ( csi no. 5.18 ) 108 rcc work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. . ( csi no. 5.23 ) 109 r.c.c work with cement approved coarsesand ( f.m1.8 to 2.5 ) and 2cm gauge graded approved hard stone ballast like grainite, quartzite etc from dalla, jhasi or other quarried and approved coarse sand in proportopn 1:1.5:3 in slab, including supply of reinforcement & its bemding but incliding its fixiing and binding the same with binding wire, including cost of all other materials labour and t&p. 110 rcc work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p . ( csi no. 5.25 ) 111 rcc work with cement, approved coarse sand and2 cm gauge graded approved hard stone ballast like granite quartzite etc from dalla, jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. ( csi no. 5.27 ) 112 rcc work with cement, approved coarse sandand2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in rcc t beam slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p . ( csi no. 5.29 ) 113 first class brick ( class 150 work in 1:6 cement and coarse sand ( f.m. 1.8 to 2.5 ) mortar in foundation and plinth including supply of all materials, labour & t&p etc. required forproper completion of work. 114 first class brick ( class 150 work in 1:6 cement and coarse sand ( f.m. 1.8 to 2.5 ) mortar in super structure for one brick thick wall including supply of all materials, labour & t&p etc. required forproper completion of work. 115 first class brick ( class 150 work in 1:6 cement and coarse sand ( f.m. 1.8 to 2.5 ) mortar in super structure for half brick thick wall including supply of all materials, labour & t&p etc. required forproper completion of work. 116 first class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0m depthincluding cutting moulding bricks as required including cost ofall materials labour and t&p complete. ( csi no. 6.16 ) 117 s / f of brick bats in soak pit including supply of all labour, material t&p etc. required for proper completion of work 118 supply and fixing of 40 mm thick commercial quality sitapur plywood flush door shutters including fixing of wooden cleats and stoppers and including fixing and adjustment of oxidized hinges, bolts, locks, handles, springs and / or other fitting and including their supply andincluding painting with two coats of black japan on all iron fittings if necessary. 119 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. ( csi no. 9.01 ) 120 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) ( csi no. 9.03 ) 121 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should conform to i.s.1038 1975. ( aluminum beading with rubber packing included ) . ( csi no. 9.17 ) 122 supply and fixing galvanised mosquito proof jali ( 16x24 gauge ) withm.s. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. ( csi no. 9.18 ) 123 s / f welded wire mesh size 75x25mm and rectangularmade out of 10 swg over m.s. angle frame with m.s. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labourand t&p etc. required for proper completion of work . except cost of m.s angle and flat. ( csi no. 9.22 ) 124 grouting of vertical or inclined post of pale / chain / security fencing in truelevel, alignment and in plumb or inclination as required, including cost of all labour, materials and t&p required forproper completion of work. ( post and concrete for grouting shall be measured separately ) ( csi no. 9.28 ) 125 p / f concertina coilfencing with required dia. 600 mm upto 3 m height of wall between existing angle iron ‘y’ shaped placed 2.4 m or 3.0 m apart and with 6 horizontal r.b.t. stud tied with g.i. staples and g.i. clips to retain horizontal including necessary bolts or g.i. barbed wire tied to angle iron all complete ( no. of rounds will be 7 to 8 in one meter length ) as per direction of engineer i / c with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm / meter ( cost of ms angle, c.c. blocks shall be paid separately ) . ( csi no. 9.37 ) 126 supply and fixing 6mm thick polycarbonate multiwall sheet , fixing in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. ( csi no. 10.13 ) 127 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand ( 1:4 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. 128 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. ( csi no. 11.09 ) 129 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work but for plaster over rough face of one brick thick wall 130 providing ( 12x15 ) mm section groove in plasterincluding all material, labour andt&p etc. required for proper completion of the work. 131 making drip coarse ( 25x12 ) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and t&p etc requiredfor proper completion of work. ( csi no. 11.19 ) 132 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work. ( cement consumption 0.044 bag / sq.m. ) ( csi no. 11.20 ) 133 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 12.11 ) 134 supply and laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. completion required for proper completion of the work. 135 providing and laying18mm. thickkotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and t&p etc required for proper completion of the work. 136 providing and laying of 16 mm thick granite ( black / brown ) inflooring or skirting , of approved shade, colour, size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and t&p required for proper completion of the work, as per direction of engineer incharge. 137 providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand ( bell, johnson or equi. make ) size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and t&p required for proper completion of the work. 138 supply of 80 mm thick i shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200x ( 160+120 mm ) with minimum 5 mm thick toping of o.p.cement mixed with 25% marble powder. the compressive strength of concrete pavers blocks shall not be less than 30 mpa & 4.5 kg / no. including cost of all material, labour, t&p etc. required for proper completion of work as directed by engineer in charge but excluding g.s.t. which shall be paid extra as per rules. 139 paintingor varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint luxol or equivalent brand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should confirm to i.s. 103 1950 140 one priming coat and one coat oil bound distemper on new work includingsupply of all materials, labour and t&p etc. required for propercompletion of the work. but for every coat after the first coat 141 finishing walls with water proof cement paint of approved madelike super snowcem or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work but for each coat of water proof cement paint after the first two coats to give an even shade. 142 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. ( csi no. 13.20 ) 143 painting two coat with apex or equivalent brand weatheer coat paint on new wall surfaces ( well prepared with birla putty and one coat or primer ici or equivalent brand for shall be paid separately ) including thorough washing eith water including cost of all materials, labour, t&p required for proper completion of work . 144 laying cement concrete road slabconsisting of 1 part cement 2part approved coarse sand and 4 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape, finishing with trimix machine , concrete hardner and making good to the satisfaction of e / i inclduing cost of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 18.12 ) 145 drilling 300 mm dia. boring.bore from from 0 m bgl to 90 m bgl. work to be completed as per direction of engineer i / c . 146 drilling 300 mm dia. boring.bore from from 90 m bgl to 120 m bgl. work to be completed as per direction of engineer i / c . 147 lowering of tube well assembly alongwith shrouding with pea gravels, testing, verticality of tube well and washing of the tube well from g.l. to 180 meter b.g.l. the cost including all labour, materials, t&p required for proper completion of work but excluding the cost of slotted pipe / plain m.s / pvc.pipe assembly and pea gravel. 148 providing110mm dia plain pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work. 149 providing 110mm dia slotted pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work. 150 supply and fixing of 110 mm dia. pvc. bail plug of heavy qualityincluding all labour material & t&p. 151 supply and fixing of 110 mm dia. pvc. top plug of heavy qualityincluding all labour material & t&p. 152 supply and fixing of 32 mm dia. g.i. ( b class ) column pipes jtc / jindal make with column coupling socket as required for proper completion of workincluding all labour material & t&p. 153 supply and fixing 32mm dia. support clamps for column pipesmade out of ms flats, pairs of bolt nuts etc complete with all material, labour, t&p. 154 supply and stacking pee gravelproperly at levelled ground for measurement as directed by engineer i / c, including all labour, t&p required for proper completion of work. 155 supply & installation of 3 h.p pump set single phase electrical control panel of l&t / havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. 156 supply & installation of 3 hp outlet 50 mm dia. or more, head 60 / 24, discharge 6000 / 14000 lph submersible pump of k.s.b / calama. or eqt. make including cost of labour, t&p and material required for completion of work. 157 supply and fixing of 2.5 mm2 for pumpabove 1 hp and up to 3 hp. submersible cable havelsor equivalent make, for submersible pump complete in all respect. 158 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work. 159 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi no. 26.20 ) 160 providing and fixing pvc ball float valve 20 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 161 providing and fixing pvc connection pipe 450x15 mm with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 162 s / f of syntex or equivalent make water storage tank including all material, labour and t&p etc. required for proper completion of the work. 163 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 200gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 164 providing and fixing cp brass angle valve heavy quality ( l&k or equi. ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 165 providing and fixing cp brass piller cock heavy quality ( l&k or equi. ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 166 providing and fixing of 110 mm dia pvc pipe 4 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.18 ) 167 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi no. 26.19 ) 168 providing and fixing first quality white glazed european type w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete. 169 p / f wash hand basin ( 26x41 c.m. ) of white glazed earthen ware of hindustan / perry or equivalent make complete 170 s / f of pvc low level cistern hindustan, or equivalent make 10 liter capacity complete with all accessories including cost of all materials, labour t&petc. complete 171 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.13 ) 172 providing and fixing in position 32 mm. dia p.v.c.waste pipe for wash basin. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.14 ) 173 providing and fixing 600 mm x 450 mm beveled edge mirror of atul, kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work. 174 providing and fixing 750 mm x 20 mm size c.p. brass towel rail of approved qualityincluding bracketsincluding supply of all materials, labour and t&p etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. ( csi no. 27.16 ) 175 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.19 ) 176 providing and fixing 100 mm dia pvc p or s trap including cement concrete and all materials, labour cartage t&p etc.required for proper completion of the work. ( for w.c. ) ( csi no. 27.24 ) 177 providing and fixing ci grating 100 mm dia includingall materials, labour cartage t&p etc.required for proper completion of the work. ( csi no. 27.25 ) 178 providing and laying 75 mm dia swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. 179 providing and laying 110 mm dia swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. 180 providing and fixing 75 mm dia swr, pvc ( finolex or equivalent ) bends including cost of all materials, labour and t&p etcrequired for proper completion of the work. 181 providing and fixing 110 mm dia swr, pvc ( finolex or equivalent ) bends including cost of all materials, labour and t&p etcrequired for proper completion of the work. 182 providing and fixing 75 mm dia swr, pvc ( finolex or equivalent ) plain tee including cost of all materials, labour and t&p etc required for proper completion of the work. 183 providing and fixing 110 mm dia swr, pvc ( finolex or equivalent ) plain tee including cost of all materials, labour and t&p etc required for proper completion of the work. 184 providing and fixing false ceiling at all heights with integral densifiedr armstrong false ceiling tiles of size 595x595 x12 mm of approved texture, design and patterns having nrc ( noise reduction coefficient ) of 0.50 ( minimum ) as per is 8225:1987, light reflectance of 85% ( minimum ) . non combustible as per bs:476 ( part 4 ) , fire performance as perbs:476 ( part 6 &7 ) , humidity resistance of 100%, thermal conductivity < 0.043 w / m k as per astm 518:1991, in true horizontal level suspended on interlocking metal powder coated t grid of hot dipped galvanised iron section of 0.40 mm thick on silhouette profile, rotary stiched double webbed white with 6 sub head : 26 new technologies and materials 1632 mm reveal profilewhite / black ) , comprising of main t runners of size 15x42 mm of length 3000 mm, cross t of size 15x42 mm of length 1200 mm and secondary intermediate cross t of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x2 mm. galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. 26.23.1 with 12 mm thick armstrong miniralfobre sound absorbing sheet 185 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 5.5 mm thickness 186 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : for fixed portion powder coated aluminium ( minimum thickness of powder coating 50 micron ) 187 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) polyester powder coated aluminium ( minimum thickness of powder coating 50 micron ) ( csi no. 28.25 ) 188 providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer incharge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . 189 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 190 supply and fixing 6mm thick polycarbonate multiwall sheet , fixing in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. 191 providing of 02 nos. airport model three seater bench for consumers @ 5840.00rs / 192 providing & installation of approved make commercial water cooler of capacityof 150 ltr. / hr. including all cost of all material, labours t&petc required for proper completion of work . 193 providing & installation of approved make commercialr.o. of capacityof 50 ltr. / hr. including all cost of all material, labours t&petc required for proper completion of work . 194 wiring point for light with 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit with 1.5 sq. mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduit pipe concealed in the wall, complete with 14 swg copper earth continuity wire, gp box , modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. 195 wiring point for plug with 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable in in pvc conduit with 1.5 sq.mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall, complete with 14 swg copper earth continuity wire, gp box , piano type switch and socket etc. complete in all respect including matching colour wash. 196 supply and fixing of power plug with 20 amp. / 250 volt flush type modular switch and 5 pin 20 a / 250 volt flush type universal modular socket switch on concealed m.s box including supply of all material, labour t&p etc. required for proper completion of work. 197 wiring point for fan / fesh air fan ( light duty exhaust fan ) with 1.5 sq.mm. frlsh pvc insulated multistrand single core copper conductor cable in in pvc conduit with 1.5 sq.mm.frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduitconcealed in the wall, complete with 14 swg copper earth continuity wire, gp box , modular type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. 198 supply and wiring of submain with two number 4 sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 swg copper earth continuity wire including matching colour wash etc., complete in all respect. 199 supply and wiring of submain with two number 4sq.mm. frlsh pvc insulated 1100 v grade multistrand single core copper conductor cable in 20 mm dia heavy duty ( 2mm thick ) pvc conduit with one no. 2.5 sq. mm. frlsh pvc insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit concealed in wall, complete with one number 14 swg copper earth continuity wire including matching colour wash etc., complete in all respect. 200 s / fof 6a to 32 amp.two pole mcb ( 10ka ) 201 s / f of load kontakt 4 way spn dp box ( consumer unit ) with built in 63 amp. spn isolator for incoming complete in the all respects duly fixed on the angle iron frame required section as direction as per site condition. 202 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. 203 supply and erection of 32 amp. tpn tap off box on rising mains complete with hrc fuses etc.complete in all respect. 204 s&f of 32 amp. double pole change over switch on 25mm x25mm x 3mm angle iron frame, including the cost of labour, t&p, painting and other material required for proper completion of the work as per direction and satisfaction of engineer in charge. 205 supply and installationof led tube light crompton, bajaj & equivalent made with fitting of box / channel type t 5 energy saver without reflector & without end cover for one number 20 watt t 5 lamp / tube with 1x20 watt t 5 lamp tube complete all respect 206 supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 30watt. to 40 watt. confirming to ip 66 protection complete in all respect. 207 supply and fixing of 5 blade exhaust fan ventile air dx 225 mm of havellsor equivalent make including all material, t&p etc required for proper completion of work as approved by engineer in charge. 208 supply and fixing of 3 blade wall fan ofhavells platina 400 mm or equivalent including all material, t&petc required for proper completion of work as approved by engineer in charge. 209 supply & installation of lift ( min. size 58x6 ) 210 fire brick work ( 230 x 115 x 75 ) with 6mm thick fire cement acc mortar in super structure including supply of all materials, labour and t&p etc. required for proper completion of the work.for one brick thick wall 211 supply and installation in complete respect of 2 ton split ac 5 star ( o general, hitachi, daikin make ) along with 5 kva v guard or equivalent make stabilizers, stands, drain pipes etc including all labour and t&p and all related works as required for proper installation and running of the system complete in all respectsas approved by engineer in charge....

Uttar Pradesh Jal Nigam - Uttar Pradesh

36877650 tender for invitation of rates for supply of civil, electrical, sanitary, other materials and piece rated works ( labour ) 1 earth work in excavation in trenches for foundation pipes, cable etc in ordinary sol ( loam clay or sand ) inlcuding lift upto 1.5 mt. lead upto 30mt. and dressing of sides and rammings of bottom and disposal of surplus excavated earth as directed by the engineer. 2 upto 1.50 m to 3.00 m deep 3 upto 3.00 m to 4.50 m deep 4 upto 4.50 m to 6.00 m deep 5 filling of carted earth 6 laying in position cement concrete of specifiedgrade including the cost of centring and shuttering all work upto plinth level. 7 in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) 8 in cement concrete 1:2:4 ( 1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size ) 9 coarse sand ( compacted ) filling in sides of foundation & floor 10 providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) 11 r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also excluding supply of all materials, and including labour and tools and plants etc, required for proper completion of the works. 12 ground floor 13 first floor 14 second floor 15 as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) . 16 ground floor 17 first floor 18 second floor 19 as in item 6 but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) 20 ground floor 21 first floor 22 second floor 23 as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) 24 as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. 25 ground floor 26 first floor 27 second floor 28 m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth includinglabour and t & p etc & excluding supply of all materials, required for proper completion of the work. 29 m 150 brick work in 1:4 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth includinglabour and t & p etc & excluding supply of all materials, required for proper completion of the work. 30 laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) 31 applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 32 same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) 33 ground floor 34 first floor 35 second floor 36 same as in item no. 14 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 37 ground floor 38 first floor 39 second floor 40 mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and excluding supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 41 ground floor 42 first floor 43 second floor 44 15 mm cement plaster on rough side of single or half brick wall of mix : 1:3 ( 1 cement: 3 coarse sand ) 45 15 mm cement plaster in single coat on rough side of single or halfbrick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand . 46 ground floor 47 first floor 48 second floor 49 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. 50 ground floor 51 first floor 52 second floor 53 engraving lines in the plaster of outer face well vertically & horizontally to display the surface as stone facing as directed by the engineer in charge including labpur, & t & p etc. required for proper completion of the work. 54 ground floor 55 first floor 56 second floor 57 add for plaster drip course / groove in plastered surface or moulding to r.c.c. projections. 58 laying 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete including supply of all labour, t & p etc. excluding the cost of materials required for proper completion the work. 59 ground floor 60 first floor 61 second floor 62 laying 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete including supply of all labour, t & p etc. excluding the cost of materials required for proper completion the work. 63 ground floor 64 first floor 65 second floor 66 kota stone slab flooring over 20 mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) : 25 mm thick 67 ground floor 68 first floor 69 second floor 70 kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average ) thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 71 ground floor 72 first floor 73 second floor 74 fixing of 6 mm thick approved china white / coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment and polishing complete includinglabour and tool sand plants & excluding supply of all materials, etc. required for proper completion of the work. 75 ground floor 76 first floor 77 second floor 78 25 mm thick cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12.5mm nominal size and below ) by laid over base concrete finished with floating coat of neat cement ( base concrete to be paid separately ) including fixing of glass strips. ( excluding cost of glass strips ) 79 supply of flush doors commercial qualityconforming to i.s.2202 part i ( 1983 ) including fixing of wooden cleats and stoppers 80 35 mm thick 81 ( a ) single leaf 82 ( b ) double leaf 83 32 mm thick 84 ( a ) single leaf 85 extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shutters conforming to is: 2202 ( part i ) 86 fixing of flush / pvc doors including fixing of wooden / pvc cleats and stoppers and includingfixing and adjustment of hinges, bolts, locks, handle, springs. fittings to be supplied departmentally. 87 supply of factory made panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame covered with 5 mm thick heat moulded pvc ‘c’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided both side of the panel. 10 mm ( 5 mm x 2 ) thick, 20 mm wide cross pvc sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side pvc sheet to be fitted in the m.s. frame welded / sealed to the styles & rails with 7 mm ( 5 mm+2 mm ) thick x 15 mm wide pvc sheet beading on inner side, and joined together with solvent cement adhesive. an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the ‘c’ channel using pvc solvent adhesive etc. complete as per direction of engineer in charge, manufacturer’s specification & drawing. 30 mm thick plain pvc door shutters 88 mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 89 m.s. hold fast for doors and windows 90 m.s. grill 91 z section winodws ( openable ) 92 m.s. angle door chaukhat 40*40*5 93 fixing of door, windows / ventilators chaukhats in position. 94 ( a ) door chaukhats 95 ( b ) window chaukhats 96 ( c ) ventilator chaukhats 97 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. ( inside walls ) 98 ground floor 99 first floor 100 second floor 101 finishing walls with two coat of acrylic smooth exterior paint of best quality including supply of all materials labour and tool sand plants etc. required for proper completion of the work. 102 ground floor 103 first floor 104 second floor 105 finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. ( two coat ) 106 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work supply of all materials, labour, tools and plant etc. required for proper completion of the work. ( two coat ) 107 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth excludingcost of all materials. ( ceiling ) 108 providing & applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 109 supply of 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 110 supply of stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . 111 supply of stainless steel towerbolts ( barrel type ) with necessary screws etc. complete 112 ( a ) 300mm x 10mm 113 ( b ) 250 mm x 10mm 114 supply of bright / matt finished stainless steel handles of approved quality & make with necessary screws etc all complete. ( a ) 125 mm 115 providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a ) applying a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b ) laying brick bats with mortar using broken bricks / brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming tois : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge. d ) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement :4 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer in charge : with average thickness of 120 mm and minimum thickness at khurra as 65 mm. 116 painting or vanishing two coat on iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour, t & p etc. required for proper completion the work. paint to be used should confirm to the i.s.i. no. 103 1950. 117 same as item above but on new wood surface. 118 fixing panes of glass with equal or equivalent i.s.i. marked quality putty, brads and springs including supply of all materials, labour etc. complete. 3.80 to 4.70 mm thick 119 chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing & excluding supply of all materials complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement :4 coarse sand ) : light shade pigment using white cement. 120 filling of light cinder filling under floor of toilets & other sunken roofs. 121 labour charges for wiring points for light with 1.5 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. 122 same as item no. ( 1 ) but for two way light points. 123 same as item no. ( 1 ) but for fanandlight duty exhaust fan. 124 same as item no. ( 1 ) but for5amp plug point with piano type switch and socket etc. 125 addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. 126 addition for light / fan points with modular type switchin place of piono type switch. 127 addition for plugpointswith modular type switchin place of piono type switch. 128 addition for exhaust fanpointswith modular type switchin place of piono type switch. 129 wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm fr pvc insulated 1100 v grade single core multistrand copper conductor cable in 20 mm dia heavy duty ( 2mm thick ) pvc conduit complete, including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i / c. 130 wiring of submain 2 number 4 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 131 wiring of submain 2 number 6 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 132 wiring of submain 4 number 10 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia pvc conduitalong with two numbers 6 sqmm frlsh pvc insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects. 133 wiring of submain 4 number 16 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 40mm dia pvc conduitalong with two numbers 10 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 134 wiring of submain 4 number 25 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 50mm dia pvc conduitalong with two numbers 16 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. 135 fixing and concealing of20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work ( fortelephone ) 136 erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick g.i. pipe 19mm dia duly painted, complete in all respects. 137 erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. 138 fixing of hexagonal / round g.p. fan box of approved make made up of 1.0mm thick isi marked g.p. sheet spot weeldeed four to eight holes of 25.4 mm for pipe entry of the box. holes should be semi shuttered type with 0.5mm g.p. sheet made upper & lower cover duly screewed fitted with 300mm round zink coted m.s bar x 12mm & brand name should be embossed.fixing with wiring conduit laid in the r.c.c roof before concreting alongwith supply of all material, labour, t&p etc. required for proper completion of the work. 139 supply of ceiling fan with fan motor of a.c permanent insulation, capacitor rating conforming bee 5 star rating and is:374 / 79 and also comply with is: 1709 / 1984 with latest amendment. the rated voltage 220 / 240 volts, 50hz, 1 ph ac the fan assemble should consists of down road blades, shackle canopies etc and with double ball bearing system. bee 5 star rated 1200mm sweep 140 fixingofelectronic fan regulator ( modular ) 120 280 v. isimarked, on the existing switch board including making connetion, required material, labour t / p etc for proper completion of work to the satisfaction of engineer in charge of work. 141 fixing of led tube light with metal heavy dutybox type batten light fitting 2 x 22 watt suitable for up to 2 x 22 watt led polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. ( cat: aaa ) 142 fixing of led tube light with metal heavy dutybox type batten light fitting 1 x 22 watt suitable for up to 1 x 22 watt led polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. ( cat: aaa ) 143 fixing of recess / surface mounting round 10 to 15 watt, cut out min 125mm, height min 40mm, led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set, suitable for 24hr continuous operation, complete in all respect. ( cat: aaa ) 144 fixing of single led light wall bracket on matching m.d.f.e.g board base etc. complete in all respect. ( cat: aaa ) 145 fixing of water tight oblong 10 watt led bulhead luminaire with driverr set confirming to ip 65 and above protection complete in all respect. ( cat: aaa ) 146 fixing of surface / flush mounting distribution boards with additional metal door withot mcb complete in all respects. ( cat a ) 147 4 way tpn 148 6 way tpn 149 8 way tpn 150 fixing of 6amp to 32 amp ( 10 ka ) sp mcb in existing mcb, db complete with connections as required. ( cat: a ) 151 fixing and making connection of following mcbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) 152 40 amp. fp mcb ( cat: a ) 153 63 amp. fp mcb ( cat: a ) 154 fixing of surface / flush mounting v tpn distribution boards with additional metal door withot mcb complete in all respects. ( cat a ) 4 way v tpn 155 fixing and making connection of following mccbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) 156 100 amp. fp mccb ( cat: a ) 157 125 amp. fp mccb ( cat: a ) 158 160 amp. fp mccb ( cat: a ) 159 fixing and making connection of following mcbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) 160 40 amp. tp mcb ( cat: a ) 161 63 amp. tp mcb ( cat: a ) 162 fixing of power plug with 15a / 250 v flush type switch and 5 pin 15 a / 250v flush type universal socket in suitable m.s. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. 163 fixing of power plug with 20a / 250 v flush type switch and 5 pin 20 a / 250v flush type universal socket in suitable m.s. box including supply of all material, labor t&p etc. required for proper completion of work. 164 fixing of single pole mcbs blanking plate complete in all respects. ( cat: a ) 165 fixing and making connection of following mccbs complete in all respects as per direction and satisfaction of engineer in charge. 63 amp. fp mccb 166 supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm dia g.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in 167 laying of 25mmx3mm g.i. strip for earthing purpose as required complete in all respects. 168 fixing of two number 8 swg g.i. wire in 15mm dia gi pipe for earthing purpose as required complete in all respects. 169 laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the 170 95 sqmm3.5 core 171 70 sqmm3.5 core 172 50 sqmm3.5 core 173 35 sqmm3.5 core 174 25 sqmm3.5 core 175 10 sqmm4 core 176 fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per dire 177 95 sqmm3.5 core 178 70 sqmm3.5 core 179 50 sqmm3.5 core 180 35 sqmm3.5 core 181 25 sqmm3.5 core 182 10 sqmm4 core 183 fixing of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer incharge. 184 95 sqmm 185 70 sqmm 186 50 sqmm 187 35 sqmm 188 25 sqmm 189 16 sqmm 190 10 sqmm 191 6 sqmm 192 fixing ofmodular boxes, base & cover plate 193 fixing of following size / modules, gi box along with modular base& cover plate for modular switches in recess etc as required. 1 or 2 module ( 75mm x 75 mm ) 194 fixing ofmodular type switch / socket : 195 fixing of following modular switch / socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. 196 telephone socket outlet 197 tv antenna socket outlet 198 bell push 199 fixing of call bell / buzzer suitable single phase, 230 v etc as required. 200 laying oftelephone wire following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel / pvc conduit as required. 2 pair 201 drawing of co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. 202 drawing telephone wire following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel / pvc conduit as required. 203 20 pair 204 10 pair 205 fixing of 10 pair junction boxes for floors and building with krone connectors , with connection and punching of same 206 fixing of 20 pair junction boxes for floors and building with krone connectors , with connection and punching of same 207 fixing of 50 pair junction boxes for floors and building with krone connectors , with connection and punching of same 208 laying unplastisized rigid pvc pipe conforming to is:13592 type a including jointing , cuttingand making good the walls & floors as per requirement. 150mm 209 supply of ac 230 / 250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep. 210 fixing of energy meter and other accessories including connections etc. complete as required 3 phase meter 211 erection of ac 230 / 250 volts, 50 hz wall fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required450mm sweep. 212 supply of ac 230 / 250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required450mm sweep. ( at labs ) 213 fixing of wired decorative mirror light on suiatable for 9 watt led with lamp complete in all respect. 214 fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 watt conforming to ip 65 / 66 protection complete in all respect. ( cat aaa ) 215 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a ) first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. b ) second layer of slurry of cement@ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm.this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 216 fixing of stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, excluding the cost of materials on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. 217 providing and fixing of expansion joint system related with floor location as per drawings and direction of engineer in charge. the joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per astm b221 02. the system shall be such that it provides floor to floor / floor to wall expansion control system for various vertical localtion in load application areas thatccommodates multi directional seismic movement without stress to its components. system shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. the cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self centering arrangement that freely rotates / moves in all directions.the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. provision of moisture barrier membrane in the joint system to have watertight joint is mandatory requirement all as per the manufactures design and as approved by engineer in charge. ( material shall confirm to astm 6063 ) floor joint of 100 mm gap 218 providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper astm b221 02. the system shall be such that it provides watertight roof to roof / roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. system shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. the cover plate shall be designed of width and thickness required to satisfy movement 219 and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self centering arrangement that freely rotates / moves in all directions. the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including verticalisplacement. the joint system shall resists damage or deterioration from the impact of falling ice, exposure to uv, airborne contaminants and occasional foot traffic from maintenance personnel. provision of moisture barrier membrane in the joint system to have water tight joint is mandatory requirement. ( material shall confirm to astm 6063. ) roof joint of 100 mm gap 220 providing and fixing of expansion joint systemelated with wall joint ( internal / external ) location as per drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per astm b221 02. the material shall be such that it provides an expansion joints system suitable for vertical wall to wall / wall to corner application, both new and existing construction in office buildings & complexes with no slipping down tendency amongst the components of the joint system. the joint system shall utilize light weight aluminum profiles exhibiting minimalexposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. ( material shall confirm to astm 6063 ) .wall joint of 100 mm gap 221 fixing in position stainless steel grade 304 plate 1.0 mm thick as per design for expansion joints. 200 mm wide. 222 granite stone slab 18 mm thick mirror polished quarter rounded with anti skid lines in treads of staircase full length flooring over 20 mm ( average ) thick base laid over and jointed with cement slurry mixed with pigment to match the shade of including rubbing & polishing complete with base of cement mottar 1:4 ( 1 cement : 4 coarse snad ) etc. complete excluding the cost of materials. 223 ground floor 224 first floor 225 second floor 226 fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, ocking arrangement, stoppers, handles, including applying a priming coat of approved steel primer & excluding the cost of materials. 227 fixing rolling shutters of approved make of 80 × 125 mm ( 3 × 18 gauge ) cold rolled ml lath inter lockedthrough their eintire length and joined together at the end by locks and mountedon specially designed pipe shaft with brackets and wall bearing & excluding the cost of materials. 228 40mm thick cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size and below ) by laid over base concrete finished with floating coat of neat cement ( base concrete to be paid separately ) including fixing of glass strips. ( excluding cost of glass strips ) 229 fixing glass strips in joints of floors and skirting or dado add the item of laying floors flush with floor level including supply of all materials, labour, t & p etc. required for proper completion the work. ( a ) 37 mm wide and 3.15 mm thick 230 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size ) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications.but excluding the cost of materials etc. complete. 231 supply of 80mm thick rubber moulded cement concrete interlocking pavers block. the compressive strength of concrete pavers blocks shall not be less than 30mpa & 4.5kg / no. 232 providing and laying of 80mm thick rubber moulded cement concrete interlocking pavers block. the compressive strength of concrete pavers blocks shall not be less than 30mpa & 4.5kg / no. 233 fixing of angle iron frame 40x40x6 mm in position. 234 fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres ( minimum ) , between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post ( cost of r.c.c. posts, struts, g.i. barbed wire, earth work and concrete to be paid for separately ) 235 mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 236 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with 2nd class teak wood beading 62x19 mm. 237 providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with isi marked m.s. pressed butt hinges bright finished of required size 238 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shutters conforming to is: 2202 ( part i ) on one side only 239 p / f curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs etc. wherever necessary complete ( a ) 25 mm dia. 240 fixing of g.i. pipe ( 80 mm dia ) as per design & drawing as per drection of eic 241 fabrication of angle iron door chaukhat of 40*40*6 mm 242 supply of concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m ) , having 50 nos rounds per 6 metrelength, upto 3 m height of wall with existing angle iron ‘y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sq.mm with tape ( 0.52 mm thick ) and weight 43.478 gm / metre. 243 fixing of concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m ) , having 50 nos rounds per 6 metrelength, upto 3 m height of wall with existing angle iron ‘y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sq.mm with tape ( 0.52 mm thick ) and weight 43.478 gm / metre ( cost of materialsshall be paid separately ) 244 supply of m.s. foot rest as per standard design with 20x20mm sq bars. 245 fixing of m.s. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. 246 supply ofc.i. tee at the inlet and outlet of septic tank. 247 fixing c.i. tee at the inlet and outlet of septic tank. 248 supply of 75mm dia vent pipes. 249 fixing of 75mm dia vent pipes. 250 supply of 75mm dia cast iron terminal guard. 251 fixing of 75mm dia cast iron terminal guard. 252 supply ofprecast rcc manhole cover and frame of required shape and approved quality. 253 m.d. 10 circular shape 500mm internal diameter 254 m.d. 2.5 circular shape 450mm internal diameter 255 fixing in position precast rcc manhole cover and frame of required shape and approved quality. 256 m.d. 10 circular shape 500mm internal diameter 257 m.d. 2.5 circular shape 450mm internal diameter 258 excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. 259 up to 1.50 m depth 260 pipes 80 mm to 300 mmdiameter 261 1.50 m to 3.00 m depth 262 pipes 80 mm to 300 mmdiameter 263 opentimbering in trenches including shuttering and shoring complete. ( measurement to be taken of the face area timbered ) 264 depth not exceeding 1.5 meter 265 depth 1.5 to3.00meter 266 supply of non pressurenp 2 class ( light duty ) rcc pipe with collars etc. complete. 267 150 mm.dia. rccpipes 268 250 mm.dia. rccpipes 269 100 mm dia rcc pipes 270 laying of nonpressurenp 2 class ( light duty ) rcc pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 ( 1cement : 2 finesand ) includingtestingof joints etc. complete. 271 150 mm.dia. rccpipes 272 250 mm.dia. rccpipes 273 100 mm dia rcc pipes 274 laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) upto the haunches of pipes including bed concrete as per standard design 275 150 mm.dia. rccpipes 276 250 mm.dia. rccpipes 277 100 mm dia rcc pipes 278 constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :4 coarse sand ) rcc top slab with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) , foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size ) finished with a floating coat of neat cement complete as per standard design. 279 inside size 90x80cms and 45cms deep including ci cover with frame ( light duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15kg ) . 280 extra for depth for manholes: 281 inside size 90x120cms and 90cms deep including ci cover with frame ( medium duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58kg ) . 282 extra for depth for manholes: 283 supply of orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per is:10910 on 12 mm dia steel bar conforming to is:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing. 284 fixing of orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per is:10910 on 12 mm dia steel bar conforming to is:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) complete as per design. 285 supply of double flanged ( screwed / welded ) centrifugally ( spun ) ductile iron pipes of class k 9 conforming to is 8329 100mm dia ductile iron double flanged 286 fixing & laying double flanged ( screwed / welded ) centrifugally ( spun ) ductile iron pipes of class k 9 conforming to is 8329 100mm dia ductile iron double flanged 287 supply of ci specials such as bends, reducers, collars etc. including cartage, loading, unloading, taxes, excise etc. complete. 288 fixing of ci specials such as bends, reducers, collars etc. including cartage, loading, unloading, taxes, excise etc. complete. 289 supply of push on joints to centrifugally ( spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket : 100mm dia pipes 290 fixing of push on joints to centrifugally ( spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket : 100mm dia pipes 291 supply ofc.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 100mm diameter 292 fixing of c.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 100mm diameter 293 supply of c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete ( the tail pieces, tapers etc. if required will be paid separately. a ) 50mm dia 294 fixing of c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete ( the tail pieces, tapers etc. if required will be paidsaperately 50mm dia 295 supply of g.i. pipes ( medium ) complete with g.i. fittings 296 80mm nominal bore. 297 65mm nominal bore. 298 50mm nominal bore. 299 40mm nominal bore. 300 32mm nominal bore. 301 25mm nominal bore. 302 20mm nominal bore. 303 15mm nominal bore. 304 laying, jointing, testing & commisioning ofg.i. pipes complete with g.i. fittings includingtenching and refilling etc. ( external work ) 305 80mm nominal bore. 306 65mm nominal bore. 307 50mm nominal bore. 308 40mm nominal bore. 309 32mm nominal bore. 310 25mm nominal bore. 311 20mm nominal bore. 312 15mm nominal bore. 313 supplying of specials for pressure pipe. 314 fixing of specials for pressure pipe. 315 supply ofgate valve ( with cap complete with bolts, nuts, rubber insertion etc. 316 80mm nominal bore. 317 65mm nominal bore. 318 50mm nominal bore. 319 40mm nominal bore. 320 32mm nominal bore. 321 25mm nominal bore. 322 fixing of gate valve ( with cap complete with bolts, nuts, rubber insertion etc. 323 80mm nominal bore. 324 65mm nominal bore. 325 50mm nominal bore. 326 40mm nominal bore. 327 32mm nominal bore. 328 25mm nominal bore. 329 constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 330 constructing brick masonry chamber 600 x 600x750mm insidewithf.p.s. brickwork in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve / air valve, with c. i. surface box 100 mmtop diameter, 160 mm bottom diameter and 180mm deep ( inside ) with chained lid and rcc top slabwith 1 : 2 : 4 mix ( 1 cement : 2 coarsesand : 4 gradestone aggregate 20 mm nominal size ) ; necessary excavation, foundationconcrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plasteringwithcement mortar 1 : 3 ( 1 cement : 3 coarsesand ) 12mmthick finished with a floatingcoatofneat cementcomplete as per standarddesign 331 supply offire brigade inlet with 63 mm dia instantaneous inlet complete with all necessary fittings and ms enclosure with glass door made of 18 / 16 swg sheet. 4 way 332 fixing, installation, testing & commissioning offire brigade inlet with 63 mm dia instantaneous inlet complete with all necessary fittings and ms enclosure with glass door made of 18 / 16 swg sheet. 4 way 333 supply of sluice valve complete with flanges, gasket, nut bolts 150 mm 334 fixing, installation, testing & commissioning of sluice valve complete with flanges, gasket, nut bolts 150 mm 335 supply of nrv complete with flanges, gasket and nut bolts. 150 mm 336 fixing, installation, testing & commissioning of nrv complete with flanges, gasket and nut bolts. 150 mm 337 supply of ms pipes conforming to is:1239 ( medium b class ) including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required ( for riser ) 338 150 mm dia 339 100mm dia 340 fixing of ms pipes conforming to is:1239 ( medium b class ) including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required, cutting holes and chases in brick or rcc walls and making good complete. ( for riser ) 341 150 mm dia 342 100mm dia 343 supply of manual swing type first aid fire hose reel conforming to is: 444 complete with all other necessary fixing accessories. 344 fixing, installation, testing and commissioning of manual swing type first aid fire hose reel conforming to is: 444 complete with all other necessary fixing accessories. 345 supply of fire man axe. 346 fixing of fire man axe. 347 supply of singal headed hydrant landing valve comprising of 80 mm dia flanged bend 63 mm dia, with cap and chain conforming to is:5290 ( make : newage / minimax / safex / firex ) 348 fixing, installation, testing & commissioning of singal headed hydrant landing valve comprising of 80 mm dia flanged bend 63 mm dia, with cap and chain conforming to is:5290 ( make : newage / minimax / safex / firex ) 349 supply of rrl hose pipe 63 mm dia × 15 mtr. long with gm coupling conforming to is : 636 ( make newage / jayshree / crc ) 350 fixing, installation, testing & commissioning of rrl hose pipe 63 mm dia × 15 mtr. long with gm coupling conforming to is : 636 ( make newage / jayshree / crc ) 351 supply of short branch pipe as per is:903 ( make : newage / safex / firex ) 352 fixing, installation, testing & commissioning of short branch pipe as per is:903 ( make : newage / safex / firex ) 353 supply of butterfly valve complete with flanges, gasket, nut bolts 100 mm 354 fixing, installation, testing & commissioning of butterfly valve complete with flanges, gasket, nut bolts 100 mm 355 supply of hose cabinet box of 18 swg m.s.sheet with glass to accommodate hose reel drum with ruber pipe with nozzle. 2 nos. rrl hose and 1 no. branch pipe with nozzle 356 fixing, installation, testing & commissioning of hose cabinet box of 18 swg m.s.sheet with glass to accommodate hose reel drum with ruber pipe with nozzle. 2 nos. rrl hose and 1 no. branch pipe with nozzle 357 supply of air cushion tank ( 2000x1000 ) mm. 358 fixing, installation, testing & commissioning of air cushion tank ( 2000x1000 ) mm. 359 supply of air release valve. 360 fixing, installation, testing & commissioning of air release valve. 361 supply of nrv complete with flanges, gasket and nut bolts. 100 mm 362 fixing, installation, testing & commissioning of nrv complete with flanges, gasket and nut bolts. 363 supply of pressure gauge with gauge cock 364 fixing, installation, testing & commissioning of pressure gauge with gauge cock 365 supply of electrical motor driven fire pump suitable for automatic operation consisting of following : ( terrace pump ) ( make : kirloskar / mather+platt ) ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. ( b ) squirrel cage, tefc induction motor suitable for 415 v, 3 phase having ip 55 protection and class b insulation for the above pump and flexible coupling with the pump.the motor shall b rated for continuous duty and shall have hp rating necessary to drive th pump at 150% of its rated discharge at 65% of rated head. © common bed plate of fabricated mild steel channel or cast iron type. ( d ) suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts, anti vibration pads, washers etc. ( e ) pressure switch for automatic operation of motor including necessary wiring upto control panel. ( f ) electrical control panel with starter, 3 pole motor protection category current limiting type mccb, indicating light, ammeter, voltmeter, selector switches, cts protective fuses, single phasing protection, dry suction cut off etc as requrd as per standard details.discharge :450 liter per minute head : 35 meter 366 installation, testing and commisioning of electrical motor driven fire pump suitable for automatic operation consisting of following : ( terrace pump ) ( make : kirloskar / mather+platt ) ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. ( b ) squirrel cage, tefc induction motor suitable for 415 v, 3 phase having ip 55 protection and class b insulation for the above pump and flexible coupling with the pump.the motor shall b rated for continuous duty and shall have hp rating necessary to drive th pump at 150% of its rated discharge at 65% of rated head. © common bed plate of fabricated mild steel channel or cast iron type. ( d ) suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts, anti vibration pads, washers etc. ( e ) pressure switch for automatic operation of motor including necessary wiring upto control panel. ( f ) electrical control panel with starter, 3 pole motor protection category current limiting type mccb, indicating light, ammeter, voltmeter, selector switches, cts protective fuses, single phasing protection, dry suction cut off etc as requrd as per standard details.discharge :450 liter per minute head : 35 meter 367 ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. 368 fixing & placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 369 supply of halon free portable fire extinguishers as described below: 370 4.5 kg carbon dioxide extinguisher, is marked, with high pressure discharge tube, horn, control valve, cce approved cylinder 371 6 kg mono ammonium phosphate ( abc ) type cartridge operated extinguishers 372 9 kg mono ammonium phosphate ( abc ) type cartridge operated extinguishers 373 providing, fixing, testing and commissioning of 50 litres ( trolley mounted ) mechanical foam type fire extinguisher. in hp mild steel cylinders isi marked tac approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to is:910 . 374 providing, fixing, testing and commissioning of co2 type fire extinguisher of capacity 22.5 kg filled with co2 gas as per is 15222 with controll discharge mechanism fitted with hose, horn & trolleyconfirms to is 2878 bearing isi mark. co2 cylinder as per is 7285 375 fixing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire extinguishers as described below: 376 supply of fire related signages printed on photoluminescent u1000 aluminium sheet of 1.0 mm ( + 10% ) containing lumigen ii as base chemical, covered under uv stablized coating and of appropriate size for fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete. 377 fixing of fire related signages printed on photoluminescent u1000 aluminium sheet of 1.0 mm ( + 10% ) containing lumigen ii as base chemical, covered under uv stablized coating and of appropriate sizeincluding fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by engineer in charge. 378 supply ofci cover with frame light weight complete as perdesign size 600x600 mm 379 supply ofci cover with frame light weight complete as perdesign size 900x900 mm 380 boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in is: 2800 ( part i ) , including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, beyond 90 metre & upto 150 metre depth below ground level.drilling of 250 mm dia bore hole manually. 381 supply of unplasticized pvc medium well screen ( rms ) pipes with ribs, conforming to is: 12818, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.150 mm nominal size dia 382 assembling, lowering and fixing in vertical position in bore well unplasticized pvc medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.150 mm nominal size dia 383 supply of stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. 384 supply of gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. 385 supply of coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of engineer incharge. 386 filling, spreading & leveling coarse sand, gravels & stone boulders of size range 1.5 mm to 20 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of engineer incharge. 387 transportation charges of drilling equipment including assembly and other material as required. 388 drilling of 675 mm. dia by rotary machine 389 supply of 350 mm. dia housing pipe ( 8 mm. thick ) 390 laying of 350 mm. dia housing pipe ( 8 mm. thick ) 391 supply of 200 mm. dia blind pipe ( 8 mm. thick ) 392 laying of 200 mm. dia blind pipe ( 8 mm. thick ) 393 supply of 200 mm. dia slotted pipe ( 8 mm. thick ) 394 laying of 200 mm. dia slotted pipe ( 8 mm. thick ) 395 supply of 350 mm. dia socket 396 fixing of 350 mm. dia socket 397 supply of 200 mm. dia socket 398 fixing of 200 mm. dia socket 399 supply of 200 mm. dia bail plug 400 fixing of 200 mm. dia bail plug 401 supply of 350 mm. dia well cap 402 fixing of 350 mm. dia well cap 403 supply of 350x200 mm. dia reducer. 404 fixing of 350x200 mm. dia reducer. 405 supply of 350 mm. dia housing clamp 406 fixing of 350 mm. dia housing clamp 407 supply of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of e / i. 408 filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of e / i. 409 development by air compressor including transportation. 410 development by o.p. unit including transportation. 411 supply of 7.5 hp ksb make submersible pump set model bpd 302 / 4+uami 150 / 6 / 22 203 ( s / d ) suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with ksb electric moter operating of 415 volt suitable for 3 phase 50 cycle a.c. supply of following duty condition 7.5 hp 6 stage pipe.a discharge of water in lpm 860 approx size of discharge outlet in 80 mm.b total head of pump set 45 m. 412 supply of finolex or equivalent isi marked submersible copper cable of size 2x3x2.5 sq. mm. 413 fixing of finolex or equivalent isi marked submersible copper cable of size 2x3x2.5 sq. mm. 414 supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having l&t of qul. male switch fuse unit with hrc fuses, ameter, boltmeter, selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of jyoti or eq. air break star delta motro starter suitable for above submersible pump set. 415 supply of 80mm dia m.s. column pipe of class c both and socketed with heavy sockets in 3 / 6 meter length and one end flanged complete with interlocking arrangements. 416 lowering of 80mm dia m.s. column pipe of class c both and socketed with heavy sockets in 3 / 6 meter length and one end flanged complete with interlocking arrangements. 417 supply of 80mm dia m.s. column pipe clamps with nut, bolts, packing etc. 418 lowering of 80mm dia m.s. column pipe clamps with nut, bolts, packing etc. 419 supply of 80mm dia c.i. double flanged isi mark reflex valve of updadhya or equ. make. 420 fixing ofc.i. double flanged reflex valve 421 supply of 80mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. 422 supply of 100 mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. 423 supply of 150mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. 424 fixing of 80 / 100 / 150 mm dia c.i. double flanged isi mark sluice valve with hand wheel 425 supply of c.i. double flanged bend of 80mm dia 426 fixing of c.i. double flanged bend of 80mm dia i / c cost of labour. 427 supply of 80mm dia c.i. tee heavy quality i / c cost of material. 428 fixing of 80mm dia c.i. tee heavy quality 429 supply of guru / fibing or equivalent make pressure gauge. 430 fixing of pressure gauge. 431 erection & commissioning of pumping plants complete along with electric wiring. 432 supply of steel wire rope of 1 / 2 size 433 fixing of steel wire rope of 1 / 2 size 434 s / b of 600mm x 600 mm x 6.0 mm g.i. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia g.i. pipe and funnel for watering and one earthing lead on one no. 8 to 10 swg gi wite in 15mm dia g.i. pipe up to switch board ( from appron to switch board the cost of g.i. , pipe and g.i. wire will be extra ) 30 cm square c.i. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of e / i complete in all respects as per drawing. 435 s / f of one number 8 to 6 swg g.i. wire in 15mm dia g.i. pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. t&p other material required for proper completion of the work as directed at site. 436 s / f of aluminium conductor pvc insulated armoured, served, sheathed cable 1100 volts grade16 sqmm x 4 core 437 fixing of aluminium conductor pvc insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mmbelow ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top.on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by e / i complete in all respects the armoring of the cable shall be properly connected with the earth conductor by clamps etc.16 sqmm x 4 core 438 supply of 500 kva. 11 / 0.433 kv, 3phase, 50hz, dyn 11, oil type, ( uppcl approved make ) copper wound transformer with off load tap changing arrangement on hv side in steps of + / 2.50%, + / 5% & 7.5% , having cable end boxes on hv sideand 800 amp. bus trunking arrangement on lv side complete with all accessories i / c first filling of filtered dehydrated oil and confirming to is 2026 ( part 1 to part 5 ) & as per specification attached complete in all respects as required at site. 439 installation, testing and commissioning of 500 kva. 11 / 0.433 kv, 3phase, 50hz, dyn 11, oil type, ( uppcl approved make ) copper wound transformer with off load tap changing arrangement on hv side in steps of + / 2.50%, + / 5% & 7.5% , having cable end boxes on hv sideand 800 amp. bus trunking arrangement on lv side complete with all accessories i / c first filling of filtered dehydrated oil and confirming to is 2026 ( part 1 to part 5 ) & as per specification attached complete in all respects as required at site. 440 supply of 3 core standered aluminium conduktor xlpe ( cross linked polyethylene ) insulated pvc bedded, galvanised flat steel strip armoured cables confirming to i.s. 7098 ( part ii with latest amendments ) 11 kv grade 150sq. mm 3 core 441 laying of 3 core standered aluminium conduktor xlpe ( cross linked polyethylene ) insulated pvc bedded, galvanised flat steel strip armoured cables confirming to i.s. 7098 ( part ii with latest amendments ) 11 kv grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. thearmouring of cable shall be properly connected with earth condutor by clamps etc.150sq. mm 3 core 442 supply of 3 core 240sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. 443 making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. 444 making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240 sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. 445 supply and burying of 40mm dia x 4.5 metres long g.i. pipe vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8 swg gi wire in g.i. pipe up to appron ( and from appron to switch board the cost of g.i. wire and pipe will be extra ) upto switch board, 30cm square c.i. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150mm thick alround etc. as per directions of engineer in charge complete in all respects as per drawing. 446 supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. 447 supply and burying of 600mm x 600mm x 3 mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia g.i pipe and funnel for watering and one earthing lead ofone no. 8swg copper wire in 15 mm dia g.i pipe up to switch board ( from appron to switch board the cost of g.i pipe and copper wire will be extra ) 30 cm square c.i frame with hinged cover masonry housingalternate layers of charcoal / coke and salt atleast 150mm thick alround etc. as per directions of engineer in charge complete in all respects. 448 supply and laying of 32mm x 6mm g.i. strip from earth electrode directly in the ground as required complete in all respects. 449 supply and laying of 32mm x 6 mm copper strip from earth electrode directly in the ground as required complete in all respects.. 450 supply and laying of 25mm x 3mm g.i. strip from earth electrode directly in the ground as required complete in all respects. 451 supply and fixing of one number 8 swg g.i wire in 15mm dia. g.i pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, t&p other material required for proper completion of the work as directed at site. 452 supply of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade 453 300 sqmm3.5 core 454 185 sqmm3.5 core 455 150 sqmm3.5 core 456 35 sqmm3.5 core 457 25 sqmm3.5 core 458 16 sqmm4 core 459 10 sqmm4 core 460 16 sqmm2 core 461 10 sqmm2 core 462 6 sqmm2 core 463 laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on m.s. clamps etc. of suitable size. from 6 sqmm 2 core to 300 sqmm3.5 core 464 supply of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete 465 300 sqmm3.5 core 466 185 sqmm3.5 core 467 150 sqmm3.5 core 468 35 sqmm3.5 core 469 25 sqmm3.5 core 470 16 sqmm4 core 471 10 sqmm4 core 472 16 sqmm2 core 473 10 sqmm2 core 474 6 sqmm2 core 475 fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per direction of eic. from 6 sqmm 2 core to 300 sqmm3.5 core 476 supply of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape 477 300 sqmm 478 185 sqmm 479 150 sqmm 480 95 sqmm 481 70 sqmm 482 35 sqmm 483 25 sqmm 484 16 sqmm 485 10 sqmm 486 6 sqmm 487 4 sqmm 488 fixing of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer incharge. from 4 sqmmto 300 sqmm 489 supply of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130 mm and base plate 12 mm thik ) having 3mm thikness with single arm bracket ( 1 mtr length ) including the cost of foundation bolts, required t&p complete in all respect. 490 fixing of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130 mm and base plate 12 mm thik ) having 3mm thikness with single arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation bolts, excavation & back filling and required t&p complete in all respect. 491 supply of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66 and above protection complete in all respect. 492 fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66 and above protection complete in all respect. 493 supply of 6 amp to 32 amp dp mcb ( 10ka ) ( c curve ) for poles 494 fixing of 6 amp to 32 amp dp mcb ( 10ka ) ( c curve ) for poles 495 supply of decorative 40 to 45 watt led post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming to ip 65 and above protection complete in all respect. 496 fixing of decorative 40 to 45 watt led post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming to ip 65 and above protection complete in all respect. 497 supply offollowing capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contractors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn complete in all respect.25 amp spn 498 fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contractors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn complete in all respect.25 amp spn 499 supply of bakelite sheet 3 mm thick of suitable size & connector 500 fixing of bakelite sheet 3 mm thick of suitable size & connector 501 supply of m.s. pipe ( class b is : 1239 ) pole suitable for fixing 70 watt. hpsv post top including 4 pole cable junction box with 5 amp. rewireablefuse fitting and 5 amp. switch on laminated cover and m.s. box complete with water tight cover and 450x450x450mm base above ground and 2x4sqmm aluminium wire from cable box to lamp for connection including painting the pole on primer coats and necessary reducers on thetop of pole for fixing of post top lantern. 65mm dia 4m long ( 3m above ground and 1 m below ground ) . 502 fixing of m.s. pipe ( class b is : 1239 ) pole suitable for fixing 70 watt. hpsv post top including 4 pole cable junction box with 5 amp. rewireablefuse fitting and 5 amp. switch on laminated cover and m.s. box complete with water tight cover includingmasonary / pcc ( 1:3:6 ) work for erecting the pole and 450x450x450mm base above ground and 2x4sqmm aluminium wire from cable box to lamp for connection including painting the poleby an approved shade on primer coats and necessary reducers on thetop of pole for fixing of post top lantern.the work shall be complete as required up to the satisfaction of engg. in charge.65mm dia 4m long ( 3m above ground and 1 m below ground ) . 503 making of following size of cable chamber made of 230 mm thick brick work in cement mortar ( 1 cement : 6 sand ) with pcc 100 mm thick pcc base plastering of inner and outer surface with cement mortar including providing of heavy duty c.i cover complete with digging, refilling and removal of surplus soil complete as required. material cost will be paid saperately.900 mm x 900 mmx 1000 mm deep 504 supply of mv danger notice plate of 200 mm x 150 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. 505 supply of ht danger notice plate 250 mm x 200 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. 506 fixing of mv / ht danger notice plate 250 mm x 200 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. 507 supplying of fire buckets, round bottom made of g.i. sheet 9 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of engineer in charge. 508 fixing of fire buckets, round bottom made of g.i. sheet 9 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of engineer in charge. 509 supply of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality 510 layingof 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality 511 supply of danger board fabricated from 10 gauge ms sheet as per ie rules 512 fixing of danger board fabricated from 10 gauge ms sheet as per ie rules 513 supply of shock treatment chart ( prescribed under i.e.rules ) duly framed with glass and supported from back with hard board or soft board. 514 fixing of shock treatment chart ( prescribed under i.e.rules ) duly framed with glass and supported from back with hard board or soft board with supply of all labour t & pfor proper completion of work. 515 supply of fire extinguishers, abc type 4.00 kg. capacity ( isi marked is : 15683 & tac approved ) complete with initial charges and wall bracket, 516 supply of co2 typefire extinguishers, 4.50 kg. capacity ( isi marked is : 2878 & tac approved ) complete with initial charges and wall bracket, 517 fixing of fire extinguishers, abc type 4.00 kg. & co2 type 4.5 kg. capacity complete with initial charges and wall bracket, along with supply of all labour for proper completion of work. 518 supply of water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 519 fixing of water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests 520 supply of white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) , conforming to is : 7231, parryware / hindware / seabrid / orient ( coral ) with all fittings and fixtures complete.w.c. pan with isi marked black solid plastic seat and lid 521 fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) , conforming to is : 7231, parryware / hindware / seabrid / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : w.c. pan with isi marked black solid plastic seat and lid 522 supply of white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 523 fixing of white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 524 supply of white vitreous china wash basin with c.i. brackets painted white, 15 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standerd pattern. 525 a ) white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps 526 b ) white vitreous china surgeon type wash basin of size 660x460 mm with single 15 mm c.p. brass pillar tapswith elbow operated levers isi marked 527 fixing of white vitreous china wash basin with c.i. brackets painted white, 15 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standerd pattern including cutting & making good the walls wherever required. 528 a ) white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps 529 b ) white vitreous china surgeon type wash basin of size 660x460 mm with single 15 mm c.p. brass pillar tapswith elbow operated levers isi marked 530 supply of p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 531 semi rigid pipe 532 32 mm dia 533 40 mm dia 534 fixing of p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 535 semi rigid pipe 536 32 mm dia 537 40 mm dia 538 supply of 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 539 fixing of 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 540 supply of stainless steel aisi 304 ( 18 / 8 ) kitchen sink as per is : 13983 with c.i. brackets and stainless steel plug 40mm including painting of fittings and brackets, kitchen sink with drain board size 510x1040 mm bowl depth 250mm 541 fixing of stainless steel aisi 304 ( 18 / 8 ) kitchen sink as per is : 13983 with c.i. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.kitchen sink with drain board size 510x1040 mm bowl depth 250mm 542 supply of white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings. 543 range of three half stall urinals with 10 litre pv.c. automatic flushing cistern. 544 range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 545 range of single half stall urinals with 5 litre pv.c. automatic flushing cistern. 546 fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required: 547 range of three half stall urinals with 10 litre pv.c. automatic flushing cistern. 548 range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. 549 range of single half stall urinals with 5 litre pv.c. automatic flushing cistern. 550 fixing of stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade 551 supply of unplasticised pvc connection pipe with brass unions 552 45 cm length 553 15 mm nominal bore 554 fixing of unplasticised pvc connection pipe with brass unions 555 45 cm length 556 15 mm nominal bore 557 supply of c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore 558 fixing of c.p. brass bib cock of approved quality conforming to is:8931v a ) 15 mm nominal bore 559 supply of c.p. brass long body bib cock of approved quality conforming to is standards andweighing not less than 690 gms.a ) 15 mm nominal bore 560 fixing of c.p. brass long body bib cock of approved quality conforming to is standards andweighing not less than 690 gms.a ) 15 mm nominal bore 561 supply of c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is:8931a ) 15 mm nominal bore 562 fixing of c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is:8931a ) 15 mm nominal bore 563 supply of c.p. brass shower rose with 15 or 20mm inlet 150 mm diameter 564 fixing of c.p. brass shower rose with 15 or 20mm inlet150 mm diameter 565 supply of c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is:8931: 150 mm diameter 566 fixing of c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is:8931: 150 mm diameter 567 supply of ptmt bottle trap for wash basin and sink.bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 568 fixing of ptmt bottle trap for wash basin and sink.bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 569 supply of ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 570 fixing of ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 571 supply of ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 572 fixing of ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 573 supply of unplasticised pvc pipe clips of approved design to unplasticised pvc pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws 574 110mm 575 90mm 576 fixing of unplasticised pvc pipe clips of approved design to unplasticised pvc pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete. 577 110mm 578 90mm 579 laying of cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) 580 100 / 75 mm dia 581 supply of wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a110 mm 582 fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm 583 supply of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592. 584 bend 87.5 degree 585 110 mm bend 586 shoe ( plain ) 110 mm shoe 587 fixing of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion. 588 bend 87.5 degree 589 110 mm bend 590 shoe ( plain ) 110 mm shoe 591 supply of inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 592 fixing of the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 593 supply of unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length. 110 mm 594 fixing of unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete.110 mm 595 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. 596 supply of chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing. 597 20mm dia nominal outer dia pipes 598 25mm dia nominal outer dia pipes 599 32mm dia nominal outer dia pipes 600 fixing of chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge. 601 concealed work including cutting chases and making good the walls etc. 602 20mm dia nominal outer dia pipes 603 25mm dia nominal outer dia pipes 604 32mm dia nominal outer dia pipes 605 supply of gi pipes complete with gi fittings and clamps. 606 15mm dianominal bore 607 20mm dianominal bore 608 25mm dia nominal bore 609 32mm dia nominal bore 610 40mm dia nominal bore 611 50mm dia nominal bore 612 65mm dia nominal bore 613 fixing of gi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . internal work exposed on wall 614 15mm dianominal bore 615 20mm dianominal bore 616 25mm dia nominal bore 617 32mm dia nominal bore 618 40mm dia nominal bore 619 50mm dia nominal bore 620 65mm dia nominal bore 621 painting of gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. 622 15mm dia nominal bore 623 20mm dia nominal bore 624 25mm dia nominal bore 625 32mm dia nominal bore 626 40mm dia nominal bore 627 50mm dia nominal bore 628 65mm dia nominal bore 629 supply of gi union in gi pipes 630 15mm dia nominal bore 631 20mm dia nominal bore 632 25mm dia nominal bore 633 32mm dia nominal bore 634 40mm dia nominal bore 635 50mm dia nominal bore 636 65mm dia nominal bore 637 fixing of gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) . 638 15mm dia nominal bore 639 20mm dia nominal bore 640 25mm dia nominal bore 641 32mm dia nominal bore 642 40mm dia nominal bore 643 50mm dia nominal bore 644 65mm dia nominal bore 645 supply of gun metal gate valve with wheel of approved quality. 646 25mm dia nominal bore 647 32mm dia nominal bore 648 40mm dia nominal bore 649 50mm dia nominal bore 650 65mm dia nominal bore 651 fixing of gun metal gate valve with wheel of approved quality. 652 25mm dia nominal bore 653 32mm dia nominal bore 654 40mm dia nominal bore 655 50mm dia nominal bore 656 65mm dia nominal bore 657 supply of brass stop cock of approved quality. 658 b ) 20 mm nominal bore 659 fixing of brass stop cock of approved quality. 660 b ) 20 mm nominal bore 661 supply of terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 662 fixing & placing of terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . 663 supply of glazed stoneware pipes grade a100mm dia sw pipe 664 laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete.100mm dia sw pipe 665 laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe 666 supply of square mouth s.w. gully trap grade‘a’ complete with c.i. grating, water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size p type 667 fixing of square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design150 x 100 mm size p type 668 supply of floor and wall face ringfit upvc astral ultradrain conventional system for soil and waste water pipes conforming to ( hsn code: 3917 ) type b ( i ) double socketed pipes. 669 a ) 110mm dia p.v.c. pipe 670 b ) 90mm dia p.v.c. pipe 671 fixing of floor and wall face ringfit upvc astral ultradrain conventional system for soil and waste water pipes conforming to ( hsn code: 3917 ) type b including jointing with seal ring. ( i ) double socketed pipes. 672 a ) 110mm dia p.v.c. pipe 673 b ) 90mm dia p.v.c. pipe 674 supply of upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 90mm 675 fixing of upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 90mm 676 supply of clean out plug ( astral ) 677 fixing of clean out plug ( astral ) 678 supply ofterminal guard. 679 a ) 110mm 680 b ) 90mm 681 fixing of terminal guard. 682 a ) 110mm 683 b ) 90mm 684 supply of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes. 685 110mm bend 686 90 mm bend 687 110mm coupler 688 90mmcoupler 689 110x110x110 mm single tee with door 690 90x90x90 mm single tee with door 691 fixing of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. 692 110mm bend 693 90 mm bend 694 110mm coupler 695 90mmcoupler 696 110x110x110 mm single tee with door 697 90x90x90 mm single tee with door 698 supply of 1.50 sqmm frlsh pvc insulated single core copper conductor cable 699 supply of 2.50 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 700 supply of 4.00 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 701 supply of 6.00 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 702 supply of 10 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 703 supply of 16 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 704 supply of 25 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable 705 supply of hexagonal / round gp fan box of approved make made up of 1 mm thick isi marked gp sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box duly screewed fitted with 300 mm round zink coated ms bar x 12 mm. 706 supply of ceiling fan with fan motor of ac permanent insulation, capacitor rating conforming to bee 5 star. the ratrd voltage220 / 240 volts, 50 hz, single phase, ac the fan assemble should consists of down road blades, shackle canopies with double ball bearing system – 1200 mm sweep 707 supply of electronic fan regulator ( modular ) 120 280 v isi marked 708 supply of led tube light with metal heavy duty box type batten light fitting 2x 22 watt suitable for 2x22 watt polycarbonate tube light including tube etc suitable for both surface. 709 supply of led tube light with metal heavy duty box type batten light fitting 1x 22 watt suitable for 1x22 watt polycarbonate tube light including tube etc suitable for both surface. 710 supply of recess / surface mounting round 10 to 15 watt, cut out 125 mm, height min 40 mm, led downlighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set, suitable for 24 hr continuousoperation 711 supply of single led light wall bracket on matching mdfeg board base 712 water tight oblong 10 watt led bulkhead luminery with driver set conforming to ip 65 and above protection complete. 713 supply of surface / flush mounting distribution boards with additional metal door without mcb complete. ( cat a ) 714 4 way tpn 715 6 way tpn 716 8 way tpn 717 supply of 6 amp to 32 amp ( 10 ka ) sp mcb ( cat a ) 718 supply of following mcbs 719 40 amp. fp mcb ( cat a ) 720 63 amp. fp mcb ( cat a ) 721 40 amp. tp mcb ( cat a ) 722 63 amp. tp mcb ( cat a ) 723 supply of surface / flush mounting v tpn distribution boards with additional metal door without mcb complete. 4 way v tpn 724 supply of following mccbs 725 63 amp. fp mccb ( cat a ) 726 100 amp. fp mccb ( cat a ) 727 125 amp. fp mccb ( cat a ) 728 160 amp. fp mccb ( cat a ) 729 supply of power plug with 15 a / 250 v flush type switch and 5 pin 15 a / 250 v flush type universal socket in suitable ms box 175mmx100mmx50mm size ( modular ) 730 supply of single pole mcbs blanking plate complete 731 supply of gi plate for earthing size 600 mm x 600mm x 6 mm 732 supply of gi pipe 20 mm dia 733 supply of gi wire 8 to 10 swg 734 supply of ci frame ( 30 sqcm ) with hinged cover 735 supply of gi strip for earthing purpose 25 mmx 3 mm 736 supply of aluminium conductor pvc insulated armoured, served, sheeted cable 1000 volts 737 95 sqmm 3.5 core 738 70 sqmm 3.5 core 739 50 sqmm 3.5 core 740 35 sqmm 3.5 core 741 25 sqmm 3.5 core 742 10 sqmm 4 core 743 supply of brass nickle plated compression gland for pvc insulated and armoured served sheeted underground cable including rubber ring 744 95 sqmm 3.5 core 745 70 sqmm 3.5 core 746 50 sqmm 3.5 core 747 35 sqmm 3.5 core 748 25 sqmm 3.5 core 749 10 sqmm 4 core 750 supply of palm / pin type copper tin plated cable sockets ( lugs ) to the cable leads, insulating with tape 751 95 sqmm 752 70 sqmm 753 50 sqmm 754 35 sqmm 755 25 sqmm 756 16 sqmm 757 10 sqmm 758 6 sqmm 759 supply of gi box alonwith modular base and cover plate for modular switches in recess1 or 2 module ( 75 mmx75 mm ) 760 supply of telephone socket outlet ( modular ) 761 supply of tv antenna socket outlet ( modular ) 762 supply of bell push ( modular ) 763 supply of call bell / buzzer suitable single phase 230 v 764 supply of telephone cable following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured 765 2 pair 766 10 pair 767 20 pair 768 supply of co axial tv cable rg 6 grade 0.7 mm solid copper conductor pe insulated sheeted with fine tinned copper braid and protected with pvc sheet 769 supply of 10 pair junction boxes for floors and building with krone connectors 770 supply of 20 pair junction boxes for floors and building with krone connectors 771 supply of 50 pair junction boxes for floors and building with krone connectors 772 supply of exhaust fan of ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories.300 mm sweep 773 supply of energy meter ( 3 phase ) and other accessories. 774 supply of wall fanof ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories. 450 mm sweep 775 supply of exhaust fan of ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories.450 mm sweep 776 supply of weired decorative mirror light suitable 9 watt led with lamp complete 777 supply of factory weired integral led flood light luminaries with die cast aluminium housing built with driver set suitable for 40 to 50 watt confoming to ip 65 / 66 protection complete. 778 supply of swiches ( modular ) 5 amp 779 supply of sockets ( modular ) 5 amp 780 supply of pvc conduit pipe 25 mm dia 781 supply of round sheet 782 supply of ceiling rose 783 supply of holder for bulbs 784 fixing of main lt panel 785 fixing of main em panel 786 fixing of sub panel 787 fixing of sub em panel 788 fixing of capacitor panel 150kvar 789 fixing of feeder piller 790 fixing of street feeder piller 791 supply of coarse sand 792 supply of cement50 kg 793 supply of brick m150 794 supply of stone grit 20 mm 795 supply of stone ballast 40 mm 796 supply of tor steel 8 mm dia 797 supply of tor steel 10 mm dia 798 supply of tor steel 12 mm dia 799 supply of tor steel 16 mm dia 800 supply of tor steel 20 mm dia 801 supply of tor steel 25 mm dia 802 supply of ms fabrication for door window and ventilator 803 supply of water proofing chemical cico tapecrete p151 804 supply of y shaped angle iron post 40x40x6 805 supply of kota stone 22 mm thick 806 supply of vitriried floor tile 8 to 10 mm thick in 600x600 mm size 807 supply of wall tile glazed / ceramic floor tiles 808 supply of ss railing 304 grade 809 supply of ms collapsible channel 810 supply of rolling shutter with ball bearing 811 supply of granite 812 supply of cinder 813 supply ofchequred tile 300x300 mm size 814 supply of ms gate made of ms hollow sections 815 supply of interlocking pavers 80 mm m30 mpa...

Directorate of Training and Employment - Uttar Pradesh

36864847 bids are invited for engine oil mobil oil , grease , amery paper , hand wash , sanitizer 5ltr , hand soap , paint , harpic toilet cleaner , harpic floor cleaner , harpic bathroom cleaner , foot mat , padlock 65mm , room freshner , nepthline ball , led bulb 9watt , led bulb 12watt , led bulb 15watt , led bulb 7watt , waiper , waiper pochcha , carpet dari , acid , battry water 5ltr , safty gloves rubber , safty boots , bamboo lathi , bamboo ladder 10fit , bamboo ladder 20 fit , plastic bucket 15ltr , plastic mug , garden can hazzara , lime powder , rose cutter , garden cutter , brush 2 inch , tarpoline oil , wire 23 76 , wire 40 76 , multistand copper wire 1mm , multistand copper wire 1.5mm , multistand copper wire 2.5mm , multistand copper wire 4mm , aluminium wire 1mm , aluminium wire 15mm , 2 pin top 6amp , 2pin top 16amp , 5 pin socket 6amp , 5 pin socket16amp , cushion for chair , cotton cloth total quantity : 2154...