providing of vitrified tile Tenders in Uttar Pradesh

2
Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

35119489 supply of material for construction of type 1 residence at a.t.s. campus, vati, mathura. 1 cement ( p.p.c. ) 2 c / sand 3 stone grit 10 20mm 4 stone ballast 40mm 5 bricks 6 brick bats 7 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hooks and authorised overlapping shall be measured upto floor two level. 8 providing and fixing isi marked flush door shutters conforming to is: 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.32mm thick 9 providing and fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete ( a ) . 300x16mm 10 providing and fixing stainless steel handles with screws etc. complete ( a ) 125mm 11 providing and fixing stainless steel towerbolts ( barrel type ) with necessary screws etc. complete.200x10mm 12 150x10mm 13 providing and fixing 150mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 14 mild steel or iron work of small sizes and section such as holding down bolts, hold, fasts, tierods, gratings etc. ( when not included in an overall rates ) wrought to required for and welding, grinding and completion of work. fabrication of holes, door, chaukhats nosing.hold fast 15 angle iron chaukhat 40*40*5 16 m.s. work in grill & stair case railing 17 m.s. work in z section window 18 s / fixing of 4mm thick glass pans 19 two coat birla putty 20 two coat enamel paint 21 two coat oil bound distemper 22 two coat apex paint 23 supply & fixing 6mm thick china white glazed tile in flooring or dado laid with 1:3 cement : coarse sand morter finished with white cement jointed including supply of all materials, labour for proper completion of work 24 providing & laying vitrified tiles in floor of 300x300 mm size ( thickness 20mm ) of approved brand & manufacturer in flooring or dado laid with 1:4 cement : coarse sand mortar finished with white cement jointed including supply of all materials, labour for proper completion of work. 25 providing and fixing glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying including labour, tools and plants etc. complete of 3 cm depth 26 p / f of g.i. water spout with 40mm dia including cutting in v shape 27 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1 mx1 mx400 micron, finished with 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, rounding the edges, making and finishing the outlet comlete. 28 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is 5382, leaving 10mm gap for thermal expansion, ( i ) single socketed pipes.110mm diameter 29 cinder filling in sunken portion 30 p / laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : ( a ) first layer of slurry cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. ( b ) second layer of slurry of cement @ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 31 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white pvc flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid. 32 providing and fixing stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with c.i. brackets and stainless steel plug 40mm, includingsize 610 x 460 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls and floors wherever required:kitchen sink with drain board510x1040mm bowl depth 250mm 33 providing and semirigrid pvc waste pipe for sink, wash basin & urinal basin including pvc waste fittings complete. ( a ) 32mm dia 34 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming ti is : 13592 type b including jointing with seal ring conforming to is : 5382 leaving 10mm gap for thermal expansion. ( i ) single socketed pipes. ( a ) 110mm dia p.v.c. pipe 35 ( b ) 75mm dia p.v.c. pipe 36 providing and fixing of upvc floor trap of self cleansing design with cp jali complete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110x110mm 37 providing and fixing terminal guard ( a ) 110mm 38 providing and fixing on wall face unplasticised pvc moulded fittings / accessoried for unplasticised rigid pvc pipes including jointing with seal ring leaving 10mm gap for thermal expansion.110mm bend 39 75mm bend 40 coupler110mm 41 75mm 42 single tee with door75x75x75mm 43 110x110x110mm 44 providing and fixing heavy quality stainless steel jali ( grating ) with or without hole for waste pipe for floor / nahani trap. 45 providing and fixing 32mm dia g.i. pipes spout including curing & making good the walls etc. 46 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting. ( a ) 15mm nominal bore. 47 ( b ) 20mm nominal bore. 48 providing and fixing g.i. pipes complete with g.i. fittings including trenches and refilling etc. ( external work ) ( a ) 20mm nominal bore. 49 ( b ) 25mm nominal bore. 50 painting g.i. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.20mm diameter pipe 51 25mm diameter pipe 52 providing and fixing isi marked cp brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) short body bib cock. 53 ( b ) long body bib cock. 54 providing and fixing brass full way valve with c.i. wheel of approved quality ( screwd end ) ( a ) 15mm nominal bore. 55 ( b ) 25mm nominal bore. 56 providing and fixing isi marked cp brass angle valve 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) 15mm nominal bore. 57 providing and fixing 45cm long unplasticised pvc connection pipe with brass unions. work. ( a ) 15mm nominal bore. 58 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) 15mm nominal bore 59 20mm nominal bore 60 25mm nominal bore 61 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 62 providing, fixiing pvc pipe complete. ( b ) 150mm dia meter...

Due Date : December 09, 2022

Tender Value : ₹ 23.64 Lakhs

View Tender
4
Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

34689021 supply of material for construction of type 4 residence at a.t.s. campus, vati, mathura. 1 cement ( p.p.c. ) 2 c / sand 3 stone grit 10 20mm 4 stone ballast 40mm 5 bricks 6 brick bats 7 kota stone 8 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hooks and authorised overlapping shall be measured upto floor two level. 9 providing and fixing isi marked flush door shutters conforming to is: 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.35mm thick 10 providing and fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete ( a ) 250mm x 16mm300x16mm 11 providing and fixing stainless steel handles with screws etc. complete ( a ) 125mm 12 providing and fixing stainless steel towerbolts ( barrel type ) with necessary screws etc. complete.200x10mm 13 150x10mm 14 providing and fixing 150mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 15 extra for providing lipping withteak wood battens 25 mm. mimimum depth on all edges of flush door shutters ( over all area of door shutter to be measured ) 16 extra for cutting rebate in flush door shutters ( total area of the shutter to be measured ) supplyandfixingofflushdoors, commercial qualityconformingofi.s. 2202 part 1 ( 1983 ) includingfixingofwoodencleatsand stoppersandincludingfixingand adjustment of hinges , bolts, locks, handle, springs, fitting with necessary screws to be supplied departmentally35mm thick ii class 17 mild steel or iron work of small sizes and section such as holding down bolts, hold, fasts, tierods, gratings etc. ( when not included in an overall rates ) wrought to required for and welding, grinding and completion of work. fabrication of holes, door, chaukhats nosing.hold fast 18 angle iron chaukhat 40*40*5 19 m.s. work in grill & stair case railing 20 m.s. work in z section window 21 s / fixing of 4mm thick glass pans 22 two coat birla putty 23 two coat enamel paint 24 two coat oil bound distemper 25 two coat apex paint 26 supply & fixing 6mm thick china white glazed tile in flooring or dado laid with 1:3 cement : coarse sand morter finished with white cement jointed including supply of all materials, labour for proper completion of work 27 providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more ( thickness to be specified by the manufacturer ) , of 1st quality conforming to is 15622, of ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3kg / sqm including grouting the joints with white cement and matching pigments etc., complete. 28 providing & laying vitrified tiles in floor of 600x600 mm size ( thickness 20mm ) of approved brand & manufacturer in flooring or dado laid with 1:4 cement : coarse sand mortar finished with white cement jointed including supply of all materials, labour for proper completion of work. 29 providing & laying vitrified tiles in floor of 600x600 mm size ( thickness 12mm ) of approved brand & manufacturer in flooring or dado laid with 1:3 cement : coarse sand mortar finished with white cement jointed including supply of all materials, labour for proper completion of work. 30 providing & laying of 25mm kota stone ( super quality ) in flooringover 25mm thick base of cement mortar in 1:4 ( cement : coarse sand ) laid & jointed with white cement slurry including rubbing and polishing complete 31 providing and fixing glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying including labour, tools and plants etc. complete of 3 cm depth 32 providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required sixe, approved shade, colour and txture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 33 p / f of g.i. water spout with 40mm dia including cutting in v shape 34 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1 mx1 mx400 micron, finished with 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, rounding the edges, making and finishing the outlet comlete. 35 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is 5382, leaving 10mm gap for thermal expansion, ( i ) single socketed pipes.110mm diameter 36 providing and fixing white vitreous china pedestal type water closet ( orrisa pen type w.c. pan ) with seat and lid, 10 litre low level white pvc flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid. 37 providing and fixing white vitreous china wash basin with c.l. brackets painted white, 15mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including cutting and making good the walls wherever required. ( a ) flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap. 38 providing and fixing stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with c.i. brackets and stainless steel plug 40mm, includingsize 610 x 460 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls and floors wherever required:kitchen sink with drain board510x1040mm bowl depth 250mm 39 providing and semirigrid pvc waste pipe for sink, wash basin & urinal basin including pvc waste fittings complete. ( a ) 32mm dia 40 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming ti is : 13592 type b including jointing with seal ring conforming to is : 5382 leaving 10mm gap for thermal expansion. ( i ) single socketed pipes. ( a ) 110mm dia p.v.c. pipe 41 ( b ) 75mm dia p.v.c. pipe 42 providing and fixing terminal guard ( a ) 110mm 43 providing and fixing on wall face unplasticised pvc moulded fittings / accessoried for unplasticised rigid pvc pipes including jointing with seal ring leaving 10mm gap for thermal expansion.110mm bend 44 75mm bend 45 coupler110mm 46 75mm 47 single tee with door75x75x75mm 48 110x110x110mm 49 providing and fixing 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 50 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality colour and make ( prayag or equivalent ) .600mm long towel rail total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 51 providing and fixing heavy quality stainless steel jali ( grating ) with or without hole for waste pipe for floor / nahani trap. 52 providing and fixing 32m dia upvc pipes spout including curing & making good the walls etc. 53 providing and fixing upvc pipes complete with upvc fittings and clamps, including making good the walls etc. concealed pipe, including painting. ( a ) 15mm nominal bore. 54 ( b ) 20mm nominal bore. 55 providing and fixing upvc pipes complete with upvc fittings and , including trenching and riflling etc. ( a ) 20mm nominal bore. 56 ( b ) 25mm nominal bore. 57 ( c ) 32mm nominal bore. 58 painting upvc pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.20mm diameter pipe 59 25mm diameter pipe 60 32mm diameter pipe 61 providing and fixing isi marked cp brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) short body bib cock. 62 ( b ) long body bib cock. 63 providing and fixing brass full way valve with c.i. wheel of approved quality ( screwd end ) ( a ) 15mm nominal bore. 64 ( b ) 25mm nominal bore. 65 providing and fixing isi marked cp brass angle valve 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) 15mm nominal bore. 66 providing and fixing 45cm long unplasticised pvc connection pipe with brass unions. work. ( a ) 15mm nominal bore. 67 providing and fixing square mouth pvc gully trap grade a complete with c.i. grating brick masonary chamber with f.p.s. brick of class designation 75 and water tight c.i. cover with frame of 300x300mm size ( inside ) the weight of cover to be not less than 2.70 kg. as per standard design. ( a ) 150x100mm size p, q or s. type...

Due Date : November 12, 2022

Tender Value : ₹ 12.93 Lakhs

View Tender
5
Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

34672751 supply of material for construction of type 1 residence at a.t.s. campus, vati, mathura. 1 cement ( p.p.c. ) 2 c / sand 3 stone grit 10 20mm 4 stone ballast 40mm 5 bricks 6 brick bats 7 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hooks and authorised overlapping shall be measured upto floor two level. 8 providing and fixing isi marked flush door shutters conforming to is: 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.32mm thick 9 providing and fixing stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is 1868 ) transparent or dyed to required colour or shade with nuts and screws etc. complete ( a ) . 300x16mm 10 providing and fixing stainless steel handles with screws etc. complete ( a ) 125mm 11 providing and fixing stainless steel towerbolts ( barrel type ) with necessary screws etc. complete.200x10mm 12 150x10mm 13 providing and fixing 150mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 14 mild steel or iron work of small sizes and section such as holding down bolts, hold, fasts, tierods, gratings etc. ( when not included in an overall rates ) wrought to required for and welding, grinding and completion of work. fabrication of holes, door, chaukhats nosing.hold fast 15 angle iron chaukhat 40*40*5 16 m.s. work in grill & stair case railing 17 m.s. work in z section window 18 s / fixing of 4mm thick glass pans 19 two coat birla putty 20 two coat enamel paint 21 two coat oil bound distemper 22 two coat apex paint 23 supply & fixing 6mm thick china white glazed tile in flooring or dado laid with 1:3 cement : coarse sand morter finished with white cement jointed including supply of all materials, labour for proper completion of work 24 providing & laying vitrified tiles in floor of 300x300 mm size ( thickness 20mm ) of approved brand & manufacturer in flooring or dado laid with 1:4 cement : coarse sand mortar finished with white cement jointed including supply of all materials, labour for proper completion of work. 25 providing and fixing glass strips of 3.15mm thickness in joints of floor and skirting at the time of laying including labour, tools and plants etc. complete of 3 cm depth 26 p / f of g.i. water spout with 40mm dia including cutting in v shape 27 making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1 mx1 mx400 micron, finished with 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, rounding the edges, making and finishing the outlet comlete. 28 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is 5382, leaving 10mm gap for thermal expansion, ( i ) single socketed pipes.110mm diameter 29 cinder filling in sunken portion 30 p / laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : ( a ) first layer of slurry cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. ( b ) second layer of slurry of cement @ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 31 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white pvc flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid. 32 providing and fixing stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with c.i. brackets and stainless steel plug 40mm, includingsize 610 x 460 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls and floors wherever required:kitchen sink with drain board510x1040mm bowl depth 250mm 33 providing and semirigrid pvc waste pipe for sink, wash basin & urinal basin including pvc waste fittings complete. ( a ) 32mm dia 34 providing and fixing on wall face unplasticised rigid pvc soil and waste water pipes conforming ti is : 13592 type b including jointing with seal ring conforming to is : 5382 leaving 10mm gap for thermal expansion. ( i ) single socketed pipes. ( a ) 110mm dia p.v.c. pipe 35 ( b ) 75mm dia p.v.c. pipe 36 providing and fixing of upvc floor trap of self cleansing design with cp jali complete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110x110mm 37 providing and fixing terminal guard ( a ) 110mm 38 providing and fixing on wall face unplasticised pvc moulded fittings / accessoried for unplasticised rigid pvc pipes including jointing with seal ring leaving 10mm gap for thermal expansion.110mm bend 39 75mm bend 40 coupler110mm 41 75mm 42 single tee with door75x75x75mm 43 110x110x110mm 44 providing and fixing heavy quality stainless steel jali ( grating ) with or without hole for waste pipe for floor / nahani trap. 45 providing and fixing 32mm dia g.i. pipes spout including curing & making good the walls etc. 46 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting. ( a ) 15mm nominal bore. 47 ( b ) 20mm nominal bore. 48 providing and fixing g.i. pipes complete with g.i. fittings including trenches and refilling etc. ( external work ) ( a ) 20mm nominal bore. 49 ( b ) 25mm nominal bore. 50 painting g.i. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.20mm diameter pipe 51 25mm diameter pipe 52 providing and fixing isi marked cp brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) short body bib cock. 53 ( b ) long body bib cock. 54 providing and fixing brass full way valve with c.i. wheel of approved quality ( screwd end ) ( a ) 15mm nominal bore. 55 ( b ) 25mm nominal bore. 56 providing and fixing isi marked cp brass angle valve 15mm with flange of approved quality including threading the pipe etc. for completion of work. ( a ) 15mm nominal bore. 57 providing and fixing 45cm long unplasticised pvc connection pipe with brass unions. work. ( a ) 15mm nominal bore. 58 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) 15mm nominal bore 59 20mm nominal bore 60 25mm nominal bore 61 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 62 providing, fixiing pvc pipe complete. ( b ) 150mm dia meter...

Due Date : November 12, 2022

Tender Value : ₹ 23.64 Lakhs

View Tender
6
Indian Institute Of Technology - Uttar Pradesh

33928978 tender for providing laying vitrified tiles flooring work of corridor, room ( f 03 and f 04 ) at first floor and portico ( main entrance ) in s. m. s. t., iit ( bhu ) varanasi....

Due Date : October 05, 2022

Tender Value : ₹ 2.59 Lakhs

View Tender
7
Indian Institute Of Technology - Uttar Pradesh

33392050 providing laying vitrified tiles flooring work of corridor, room ( f 03 and f 04 ) at first floor and portico ( main entrance ) in school of material science and technology, iit ( bhu ) varanasi...

Due Date : August 25, 2022

Tender Value : ₹ 2.59 Lakhs

View Tender
8
King George Medical University - Uttar Pradesh

31240200 providing laying vitrified tiles/metal false ceiling/scrapping old white coloured wash etc including disposal of refuse material, providing laying of birla white putty for making good smooth surface, oil bound distemper in two coat, enamel painting in two coat, providing fixing wash basin with piller cock bracket waste pipe waste jali pvc connection etc...

Due Date : March 03, 2022

Tender Value : ₹ Ref. Documents

View Tender
9
Indian Institute Of Technology - Uttar Pradesh

29138957 providing laying vitrified tiles in house no 131 175 165 1047 type i rectification of seepage problem from roof of house no 1008 i relaying of cc flooring of entire house of house no 225 ib providing tile on wall floor of bathroom pr providing laying vitrified tiles in house no 131 175 165 1047 type i rectification of seepage problem from roof of house no 1008 i relaying of cc flooring of entire house of house no 225 ib providing tile on wall floor of bathroom pr...

Due Date : September 21, 2021

Tender Value : ₹ 6.32 Lakhs

View Tender
10
Indian Institute Of Technology - Uttar Pradesh

29135979 tender for providing & laying vitrified tiles in house no. 131, 175, 165 & 1047, type i, rectification of seepage problem from roof of house no. 1008 i, relaying of c.c flooring of entire house of house no. 225 ib, providing tile on wall & floor of bathroom, providing kitchen sink in kitchen of house no. r 4 sbra i/c internal white washing & painting of house no. 131, 175, 165, 1047, 1008, type i, 225 ib & r 4 sbra...

Due Date : September 14, 2021

Tender Value : ₹ 6.32 Lakhs

View Tender
11
Panchayat Raj Department - Uttar Pradesh

25836363 work of furniture and renovation etc. of additional chief officer office, retiring room and construction section. providing and fixing mineral fibre false ceiling tiles at all height of size 595x595mm of approved texture, design and pattern.the tiles should have humidity resistance ( rh ) of 99%, light reflection > or =85%, thermal conductivity k=0.052 0.057 w / m k, colour white, fire performance as per ( bs 476 pt 6& 7 ) in true horizontal level suspended on interlocking t grid of hot diped all round galvanized iron section of 0.33mm thick ( galvanized @ 120 gsm ) comprising of main t runners of 15x32mm of lenght 3000mm, cross t of size 15x32mm of lenght 1200mm to form grid module of size 600x600mm suspended from ceilinh using galvanised mild steel item ( galvansed @ 80gsm ) 50 mm long 8mm outer diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t.the system should rest on periphery walls / partitions with the help of gi perimeter wall angle of size 24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s screws. the exposed bottom portion of all t section used in false ceiling support system shall be pre painted with polyester baked paint, for all height. the work shall be carried out as per specifications, drawings and as per directions of the engineer in charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile. dsr 26.27.1 73.64 sqm 2 2 providing & laying vitrified tiles ( 600x600 mm ) in different sizes ( thickness to be specified by the manufacturer ) , with water absorbtion less than 0.08% and conforming to is: 15622, of approved brands and manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to is: 15477, in average 6 mm thickness, including grouting of joints ( payment for grouting of joints to be made seperately ) . dsr 11.47.2 55.64 sqm 3 3 grouting the joints of flooring tiles ( 600x600 mm ) having joints of 3 mm width, using epoxy grout mix of .70kg of organic coated filler of desired shade ( 0.10 kg of hardener and 0.20 kg of resin per kg ) , including filling / grouting and finishing complete as per direction of engineer in charge. dsr 11.48.2 55.64 sqm 4 4 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. dsr ( 8.31 ) 31.5 sqm 5 5 supplying and fixing engineered wooden flooring microleveled end and edges. planks should be 120 mm wide and in random length ( 400 mm to 1200 mm ) comprising of 7 ply including top veneer ( 2 mm ) with thickness of 10.5 mm. the flammalibility rating of planks as per astme 648 critical radiant flux 0.45 watts / sq. cm. or more class 1 ( ama retiring room ) 18 sqm 6 6 providing & fixing of pvc wall pannelin with aluminium framework, pvc pannels, top bottom and side pofile complete as per the approved design all complete as per drawing, specification and direction of engineer incharge. nsi 157.28 sqm 7 7 providing & fixing of flush door laminated both side complete with all fittings, round mortis lock, door closer etc all complete all complete as per drawing, specification and direction of engineer incharge. nsi 5.72 sqm 8 8 supply of medium back revolving chair for je ( geeken gb 401 ) 5 nos 9 9 supply of chair for nirman section ( geeken gb 402 ) 3 nos 10 10 supply of visitor chair for je and nirman section ( geeken gb 414 ) 16 nos 11 11 supply of visitor chair for ama room ( geeken gv 618 ) 10 nos 12 12 supply of executive table for ama room ( 66x3 ) cosset make 1 nos 13 13 supply of table with side table ( 46x2 ) made by 19mm water proof board, laminate by 1mm thick mica with complete necessary handle, locks, etc for je room. 5 nos 14 14 supply of table ( 46x2 ) made by 19mm water proof board, laminate by 1mm thick mica with complete necessary handle, locks, etc for nirman section 3 nos 15 15 ss almirah for je and nirman room 1830x900x450 ( geeken gms 22 ) 8 nos 16 16 ss bench three seater ( geeken spacio 3 ) 2 nos 17 17 led t.v ( mi 50 ) 1 nos 18 18 fridge. lg make model no. b221apzy 1 nos 19 19 sofa for ama retiring room ( 3+1+1 ) stanley, geeken make 1 set 20 20 centre table 4x2 2 nos 21 21 two seater sofa for eng. room. geeken make columbia 1 nos 22 22 single seater sofa for eng. room. geeken make columbia 1 nos 23 23 deewan for ama retiring room. 1 nos 24 24 mattress sleepwell 1 nos 25 25 bedsheet cover and pillow 1 set 26 26 supply & fixing of recess mounting round 18watt led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set complete in all respect ( havells make ) 34 nos 27 27 supply & fixing of wall fans ( havells make ) 10 nos 28 28 repairing of computer table in ama room. 1 nos 29 29 supply and fixing of split ac 1.5 ton hitachi make ( 2 ama + 2 eng ) 4 nos 30 30 miscellaneous work. ( payment will be paid as per actual work done on the basis of pwd schedule / dsr / market rate ) . 1 l / s 31 31 renovation of existing toilet and pantry ( payment will be paid as per actual done work on the basis of pwd schedule / market rate ) . 1 job 32 32 electrical work ( payment will be paid as per actual done work on the basis of pwd schedule / market rate ) . 1 job...

Due Date : November 06, 2020

Tender Value : ₹ 23.83 Lakhs

View Tender
15
Aligarh Muslim University - Uttar Pradesh

17473160 providing fixing vitrified tiles wall paneling in the vip corridor ff and two rooms of vc office administrative block .based on dsr2016, wall paneling in the vip corridor => short tender notice...

Due Date : September 18, 2018

Tender Value : ₹ 3.60 Lakhs

View Tender
16
Indian Institute Of Technology - Uttar Pradesh

17397145 tender for renovation of bathroom & kitchen of house no. 170 i, providing & fixing wire mesh shutter in external doors & windows in house no. 170 i & 1013 i, providing & laying vitrified tile in house no. 1001, 1032, 1051 & 1078 i and internal white washing & painting of house no. 1001, 1051, 1032 & 1078, type i...

Due Date : September 17, 2018

Tender Value : ₹ 5.99 Lakhs

View Tender
19
Indian Institute Of Technology - Uttar Pradesh

16373641 providing & laying vitrified tile in floor of house no. 1035, providing & laying vitrified tile in entire house, floor in bathroom & basin area of house no. 1082, providing & fixing wire mesh shutter on external doors & windows of house no.1004 & 148 including internal white washing & painting of house no. 1082, type i,...

Due Date : June 16, 2018

Tender Value : ₹ 2.40 Lakhs

View Tender
21
Indian Institute Of Technology - Uttar Pradesh

15612935 providing and fixing wire mesh shutter on external door/window of h. nos. 214,230 & 2067, providing laying vitrified tile flooring in entire house except toilet portion in h. nos. 214 & 230 and renovation of wc, bath & kitchen of house no. 214,...

Due Date : March 31, 2018

Tender Value : ₹ 4.94 Lakhs

View Tender
22
Indian Institute Of Technology - Uttar Pradesh

15313050 providing & fixing vitrified tile in floor of house no. 1041 , 193 & 1066 i, providing & fixing wire mesh shutter on external door & window of house no. 1041, 127, 105 i, making an opening in inner lobby for fixing window in house no. 1041 & 193 i i/c internal white washing & painting of house no. 1041, 193, 127 & 1066 type i,...

Due Date : March 07, 2018

Tender Value : ₹ 4.18 Lakhs

View Tender
23
University Of Allahabad - Uttar Pradesh

15016315 providing / laying vitrified tile work on floor of t.v hall ( lounge ) and vip room no. 1 and 2 at g.b.pant social science institute allahabad, p / l vitrified tile work...

Due Date : February 08, 2018

Tender Value : ₹ 1.83 Lakhs

View Tender
26
Banaras Hindu University - Uttar Pradesh

14405302 providing / fixing vitrified tiles in gallery of environmental wing and b.sc. laboratory painting work deptt. of botany, institute of science, bhu,...

Due Date : December 07, 2017

Tender Value : ₹ 9.20 Lakhs

View Tender
30
Indian Institute Of Technology - Uttar Pradesh

13892954 tender for providing installation vitrified tile flooring kota stone false ceiling aluminum partition and painting work of tribology laboratory dynamic lab, cims and ergonomic labs department of mechanical engineering ...

Due Date : October 13, 2017

Tender Value : ₹ Ref. Documents

View Tender