37880606 supply of gasket top header to pipe flangegasket top header to pipe flange, gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629 [ warranty period: 30 months after the date of delivery ] => limited...
35866989 tender for special repairs to stp at lal phatak bareilly cantt under ge ( e ) bareilly demolition / dismantling ofrcc beam , chajja , shelve, drain covers and similar work complete all as specified and directed. 2 dismantling asbestos cement ( corrugated, semi corrugated etc ) sheets in roofcoveringscomplete all as specified and directed. 3 dismantling posts or struts ( wood, steel or r.c.c. ) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. 4 dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. 5 taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by engineer in charge. 6 demolition of cement concrete ( un reinforced ) and paving n.exc 15 cm thick ( below or above ground level ) complete all as specified and directed. 7 taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. 8 m & l for applying cement slurry over existing roof surface @ 3 kg / sqm complete all as specified and directed. 9 m&l screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over rcc roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by engineer in charge 10 supply and fix app polymeric water proofing membrane, minimum 3 mm thick and minium weight 3 kg per sqm tochshield membrane / equivalent with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant, black finish reinforced with non woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer torching overlaps with a propane or a butane gas torch, with a overlap of 100 mmand sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructionscomplete incl removal of existing treatment all as specified and as directed.note: ( i ) coved fillets in pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate with using water proof chemical , of radius 75mm shall be provided at the junction of roof and parapet wall / mumty / chimney / other vertical surfaces and thereafter surface painted with hot paving bitumen of grade 85 / 25 confirming to is 73, applied@1.20 kg / sqm over a coat of bituminous primer confirming to is 3384 applied @ 0.30 kg / sqm ( ii ) polymeric membrane shall be taken to a height of 45cm ( minimum ) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. ( iii ) the waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. ( iv ) in case of stone masonry parapet wall etc a groove of size 25mmx25mm ( minimuim ) shall be made in coved fillet at the junction of roof and parapet wall / mumty chimny / other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. ( v ) exposed surfaces of app membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml / sqm. ( vi ) above aspects are deemed to be included in quoted rate. 11 rolled sections as in main and cross beams, hip and jack rafters; purlins, vertical post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. 12 s & f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50mm of an colour having tensile strength of 550mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 13 m&l for ms work as in clamps, hold fast, wall ties, hooks, angle cleat and similar small articles confirming to fe290 gde e 165 complete all as specified and directed. 14 s&f pre painted galvalume aluminium zinc coating gi based plainsteel sheet 0.50mm of an colour having tensile strength of 550mpa as in ridge, fixed with self tapping screws complete all as specified and directed. 15 m&l 100 mm cement concrete type b 2, 1:2:4 ( 40mm gradedaggregate ) in sub floors, sub bases, floors and pavings and finishing cement concrete surface even and smooth complete all as specified and directed. 16 s&f for 40 mm thick factory madeflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . 17 s&f 30 mm thick factory made both side prelam pvc sheet used instead of plain colour pvc sheet. stile and rails feathered at edges consisting of frame made out of m.s. tubes for top & bottom rails, m.s. frame shall be covered with heat moulded palin colour pvc `c channel heaving apanelling of plain colour pvc sheet to be fitted in the m.s frame wedded / sealed to the stiles, & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. 18 s & f in repair 300 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 19 s & f in repair 150 mm thick aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 20 s&f in repair 150mm size aluminium handles, cast type anodised completed all as specified and directed. 21 s&f in repair300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 nos on bolt plate and 02 nos on staple plate and fix complete all as specified and directed 22 s&f in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by engineer in charge. 23 hacking outold, broken glass ( any thickness, ) size quality or description ) from metal frames incl.punching or drilling out old glazing pins / spring clips and fixing new ones incl m&lin repairfor 3mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 sqm in each pane complete all specified and as directed. 24 m& l for rendering 15mm thick in cement mortar ( 1:4 ) , on fair face of brick wall, finished even & smoothwith using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. 25 m&l rendering 15 mm thick in cm ( 1:6 ) on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. 26 m & l pcc ( 1:2:4 ) type b1 using 20mm graded stone aggregate as in staging base for motors including necessary form work and finishing all exposed surfaces of concretecomplete all as specified and directed. 27 m &l 100 mm thick pcc ( 1:4:8 ) type d2 using 40mmagg as in sub base complete all as specified and directed. 28 m&l for coloured glazed interlocking machine pressedcement concrete factory madepaver block any shape and size confirming to is 15658 2006 of100mm thickness, m 50 grade, machine pressed of pattern and colour as approvedcomplete all as specified and directed. 29 m&l for machine pressed precast cement concrete factory made glazed kerb stone of size 300x100x450 mm pcc ( 1:2:4 ) type b 0 using 12.5 mm graded stone agg , jointed in cm 1:4 including excavation and removing complete all as specified as directed 30 m&l sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 31 m&l for rcc ( 1:2:4 ) type b 1 ( using 20mm graded stone aggregate ) as in beams, cantilevers, bressummers, lintels & wall band over 1.5m span etccomplete all as specified and directed. 32 m&l for rcc ( 1:2:4 ) type b 1 ( using 20mm graded stone aggregate ) as in chajja, beams etccomplete all as specified and directed. 33 m & l for precast reinforcement cement concrete ( 1:2:4 ) type b1 using 20mm graded stone aggregatein landings, cover slabs ( for manholes, septic tanks etc. ) complete with joints to match, complete all as specified and directed 34 m&l for mild steel tmt bar10mm dia and overcut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingmild steel wire ( annealed ) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. 35 all asitem srlno.34 above, but 6mm to 8mm dia bars complete all as specified and directed. 36 formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup ports, overhangs, etc. also splaysbetweenfloors and beams, etc complete all as specified and directed. 37 m&l preparation old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified anddirected. 38 m&l for preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed by engineer in charge. 39 m&l for preparation of old wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. by engineer in charge. 40 m&l for complete removal of existing treatment on wall by scrapping with mechanical sander ( having mechanical vaccum mechanism ) with sanding pad of appropirate grit to make surface clean, free from dust , loose paintetc by skilled labourand applying oftwo coat obd on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats ofwall care puttyof 1 mmthickness prepared and sanded with finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well paint & primer usage, complete all as specified and directed. 41 m&l forapplying oftwo coat obd on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats ofwall care puttyof 1 mmthickness prepared and sanded with finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well paint & primer usage, complete all as specified and directed. 42 m&l for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats ofwhite wash complete all as specified and directed. 43 demolition of brickwork or stone / boulder masonry, built incement mortar including all quoins, pillars, etc, complete all as specified and directed. 44 m&l for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in cm ( 1:6 ) complete all as specified and directed. 45 m&l for preparing old plastered walls surfaces and applying two coats of cement base paint over a coatofprimerwith finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well paint & primer usage, complete all as specified and directed. 46 m&l for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coatofprimer with finishes shall be applied using airless spray technology and capable of oprating single spray gun with a suitable hose length. the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well paint & primer usage, complete all as specified and directed. 47 preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint overone coat of red oxide of zinc chrome primer complete all as specified and directed. 48 excavating in trenches n. exc. 1.5 m wide, and n.exc. 1.5 m in depth for foundation etc. n.exc. 10 sqm on planand getting out soft / loose soil complete all as specified and directed. 49 removing excavated material n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point. 50 returning filling in, including, spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed. 51 m&l pcc ( 1:4:8 ) type d2 using 20mm graded agg as in foundation mass concrete complete all as specified and directed. 52 dismantling fencing wire mesh, any type and size complete all as specified and directed. 53 excavating in post holes ( or similar holes ) in soft soil each n. exc. 0.5 cum, gettting out, returning fillingin and rammingearth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n exc. 50 mtr and making good surface complete all as specified and directed. 54 m &l pcc ( 1:3:6 ) type c2 using 40mmagg as in post holes / mass concrete complete all as specified and directed. 55 s&f angle iron fencing post and struts including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron fillets, plain bars ( for securing wire mess etc ) including all necessary drilling, bolting or riveting etc and similar work conforming to fe 410 0 or fe 310 0 including round bars etc complete all as specified and directed. 56 supply only chain link ms galvanisd fencing, any size or type complete all as specified and directed. 57 fixing only chain link fencing including linewires, steel bars, any mesh, sizeand type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. 58 mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other, orscrewedboth ends, each screwed end to be fitted with washers and one hexagonal or square nut, the length of bolt exc 5cm but n exc 10cm complete all as specified and directed. 59 supply only mild steel flat, roud bar or squre barin available length of fe 290 ( gde e 165 ) complete all as specified and directed. 60 s&f galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. 61 s&f framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete fe 290 gde e 165 complete all as specified and directed. 62 preparing of new steel surfaces of any description, n.exc 10cm girth when unconnected and applying two coats of syntetic enamel paint overone coat of red oxide of zinc chrome primer complete all as specified and directed. 63 m&l, 3 layer pp r polypropylene random copolymer pipes sdr 7.4 & sdr 11uv stablised and antimicrobial fusion welded having thermal stability forwater supply all pp r plain & brass threaded polypropylene random fittings and fixtures such as bends, tees, elbows, reducers, unions, plugs & sockets etc., laid in trenches, of 75mm dia with allcomplete all as specified and directed. 64 all as srl item no. 63 above, but of size 50mm complete all as specified and directed. 65 all as srl item no. 63 above, but of size 32 mm complete all as specified and directed.note for item no. 63 to 65 : excavation and earth work shall be measured and paid separately. 66 m & l for making connection of pp r distrubution branch with pp r distrubution branch with pp r main of 50 to 75 bore of pipes in mm by providing and fixing tee including cutting and making fusion joint etec., complete all as specified and directed. 67 m & l for making connection of pp r distrubution branch with pp r distrubution branch with pp r main of 32mmto 50mmbore of pipes in mm by providing and fixing tee including cutting and making fusion joint etc., all as specified and directed. 68 supply and fixing , sluice valve, 80mm size, non raising type with ci wheel, drilled flanged ends, pn 1.6, heavy duty with stainless steel spindle and gunmetal working parts including flanged jointing on both ends, jointing material such as rubber / fibre board gasket, suitable size bolts, nuts and twin washers compelete all as specified and directed. 69 all as srl item no. 68 above, but of size 50mm complete all as specified and directed. 70 m&l, construction of brick masonry valve chamber of size 900x900x 900mm ( internal dimensions ) with pcc 1:4:8 foundation 150mm thick, brick work built in cm 1:6, pcc 1:3:6 coping 50mm thick, plastering 15mm thick in cm 1:6 to all internal and exposed surfaces including excavation earthwork in hard / dense soil, ms sheet cover 4mm thick with locking arrangement embedded in pcc and painting to ms cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed. 71 supply & fixing non return valve of 100m dia of isi markedwith bolts, nuts, rubber insertions etc. complete all as specified and directed. 72 supply and fixing multisatge centirfugal pump fortreated water transferof haed 25 mtr flow rate 20 cub mtr per hr complete all as specified and directed. 73 supply and lay cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of 4 core 150sqmmcomplete all as specified and directed. 74 supply and lay cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of 4 core 16sqmm complete all as specified and directed. 75 m&l for cleaning and desiiting of screen bar channel , oil and grease trap and equilization tank andremoving allthe deposited sludge, soil and other material from mentioned aboveincluding bailing / pumping out muddy waterby mechanically or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including writing tank cleaned on ...... ( date ) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed. note: ( i ) contractor is to arrange own diesel pump, t&p etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in lift well. ( ii ) the accumulated / deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 km and notexceeding 5.00km fromthe lift wellcost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. ( iii ) before commencement of work, necessary arrangement for disposal of sewage / sludge be made and work to be carried out in fast pace by deploying more man power at lift well in order to complete the work at the earliest. 76 dewateringandpumpingoutofexistingaccumulatedsewage / sludgeat stp lal phatakat bareilly cantt fromtube settler tankby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, including removing / replacement of duck media and followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.note: the followings are deemed to be included in the rate quoted: ( i ) the disposal of accumulated / deposited sludge after dryingoutsidethedefence landtoa distance exceeding1.5 km and notexceeding 5.00km fromthe stp. ( ii ) before commencement of work, necessary arrangement for disposal of sewage / sludge bemade and work to be carried out in fast pace by deploying more man power at stp in order to complete the work in max 02 days. ( iii ) refixing of old serviceable deckmedia. ( iv ) cutting and rewelding of supporting ms frame structure. ( v ) replacement of unsv rusted portion of supporting ms frame structure.cost of ms fame will be paid saperetly 77 dewateringandpumpingoutofexistingaaccumultate sewage from mbbr i and mbbr ii tank mechanically or using external sewage disposal pump sets to near by sewage disposal drain and cleaning of tanks by scrapping with wire brush or any otyer means on walls and bottom of tank and removing the sludge / slit / sand / fungus etc deposited inside the sumps / tlanks with buckets and depositing where directed , followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning in white colour on black background on external walls complete all as specified and directed including two coats of white washinternally and externally complete.note: ( i ) the disposal of accumulated / deposited sludge after dryingoutsidethedefence landtoa distance exceeding1.5 km and notexceeding 5.00km fromthe stp. ( ii ) before commencement of work, necessary arrangement for disposal of sewage / sludge bemade and work to be carried out in fast pace by deploying more man power at stp in order to complete the work in max 02 days. ( iii ) refixing of old serviceable deckmedia. ( iv ) cutting and rewelding of supporting ms frame structure. ( v ) replacement of unsv rusted portion of supporting ms frame structure.cost of ms fame will be paid saperetly. 78 m&l for replacement of filteration media of six drying bed with sand and stone gravels ( a ) natural graded gravels of size 20mm to 25 mm 150 mm layer ( b ) natural graded of size 15 mm to 10mm 100 mm layer © natural gradede graves of size 10 mm 6mm 100 mm layer ( d ) white graded coarse quartz sand 8+ 14 mesh 100 mm layer ( e ) white graded coarse quart sand of 16+30 mesh 600 mm layer all as specified and directed. 79 dewateringandpumpingoutofexistingaccumulatedsewagefromchlorine contact tank , drying bed and treated water tank by mechanically or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.note : the followings are deemed to be included in the rate quoted: ( i ) the accumulated / deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 km and notexceeding 5.00km fromthe stpcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. ( ii ) contractor is to arrange own diesel pump, t&p etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in stp. ( iii ) before commencement of work, necessary arrangement for disposal of sewage / sludge be made and work to be carried out in fast pace by deploying more man power at stp in order to complete the work in max 02 days. 80 supply installand commissioning of granular chlorination dosing pump of high pressure single head gear motored adjustable dosing pump having output of suitablefor 461 kldand adjustable high pressure of up to 100 psi ( 7 kg / cm2 ) or more , power input 230 v, 50 hz self priming with nonmetalic with connecting nuts , ferrules and with all accessoriesincluding lead, tubing connection injection check valve complete all as specified and directed. ( a ) preparation tank ( 300 ltr ) ( i ) water inlet line ( ii ) outlet with strainer ( iii ) drain ( iv ) overflow ( v ) conical bottom for sludge deposition ( vi ) pot hole with cover ( vii ) level gauge ( viii ) inspection port ( ix ) agitator ( b ) service tank ( i ) dosing pump inlet arrangement ( ii ) drain ( iii ) overflow ( iv ) level gauge ( v ) inspection port 81 supply and installing commissioning and testing of lt panel board indoor type of suitable size cpri certified factory made cubical type weather and vermin proof fixed on including ventiliation and louvers arrangement pcc ( 1:2:4 ) type b 2 using 40 mm graded stone aggregate as in foundation of required / suitable size and as directed at site with angle iron frame of size 40x40x6 mm, 3 phase 4 wire 415 volts 50 hz fabricated out of 2 mm thick ms sheet including two coats of synthetic enameled paint over a coat of primer red oxide and keepng adequate working space inside of the box ( outer width of the box not less than 45 cm and gap between bus bar not less than one inch ) and double door handle including locking arrangement as directed before manufacturing the panel including dismantling of existing unserviceable lt panel. the drawing of the feeder pillar box will be approved by engr in charge and the same have the following electric controls : ( i ) mccb 200 amp 36 ka, 4 pole, 415 volts 50 hz adjustable thermal & magnetic setting ( as incomming ) 01 no ( ii ) mccb 63 amp 25 ka, 4 pole, 415 volts 50 hz adjustable thermal & magnetic setting ( asout going ) 10 nos ( iii ) dol starter 05 nos ( iv ) starter delta 04 nos ( v ) digital type volt meter with suitable volts with selector switches. ( vi ) digital type volt meter with suitable amps with resin cast ct of suitable amps and selector switch 01 ( at main out going ) ( vii ) led indicating lamp assembly r, y, b phase as per site reuirement. ( viii ) insulated eposcy coated high conductivity copper bus bar 600 amps with colour code for phase and neutral complete all as specified and directed. ( ix ) s&f wiring with pvc insulated multistranded copper conductor single core cable 6 sq mm ( nominal cross sectional area ) as per site requirement including sutable size of copper lugs etc all as specified and directed. 01 no ( x ) s&f in repairs single phase preventer direct mounting type with suitable relay range. ( xi ) supply and fix over load protection relay with suitable relay range for operation on 3 phase, 415 v as per site requirement. 82 m&l for dismanting of old unsv air blower and supply, installation testing and commisioning for air diffusion system comprising of : air blowers ( 1w+1s ) capacity: approx 350 m3 / hr at 4500 mmwc and old unsv existing air blower will be kept in store yard of age e / m iii all as specified and directed. 83 s&f no entry board of size 200mm x 650mm of thickness 3 mm ms plate duly painted on both sides alongwith necessary fixing arrangements for pump house as per sample complete all as specified and directed. 84 supply only lt rubber insulation mat for pump house of size 1 mtr x 3 mtr of thickness 10 mm as per sample complete all as specified and directed. 85 supply only ortho tolidin solution as 1000ml / bottle for testing of dissolved chlorine in water complete all as specified and directed 86 supply only chlorine testing glass test tube kit complete all as specified and directed 87 supplying andfixingverticalinlinessrawwaterfilterfeedpumps withci volute andss impellarandwithstainlesssteelshaft, mechanicalseal andchrome steelshaft sleeve, connectedtoa tefcinduction motorsuitablefor400 / 440 volts, 1500rpm, 3 phase 50 cyclesa.c.supplyhavingip 55protectionenclosure. completewithbaseframe, vibration eliminating pads, nutsandbolts, pressuregaugeondeliverysideetc.withsuctionstrainer ( necessary rcc foundations as per requirement and as per instructions shall be provided by the agency ) andtaking out of old unsv existing raw water pump will be kept in store yard of age e / m iii all as specified and directed.raw water filter feed pumpscapacity :525lph ( each ) head : 12 meterpower : 7.5 hp as required with 100% standby pumps ( 2w+1s ) . 88 supplying andfixingc.i.“y”typesuctionstrainerwithstainlesssteelperforatedsheet screen, flangedendsinerinstalledoutsidewatertanks complete all as specified and directed. ( make:leader / zoloto / kartaror equivalent ) 89 supply and installations of pipping grid arrangement ofstainless steel 304 of 32 mmfor oxidation in equalization tank as well as pipping grid in mbbr tank connected withairdiffuserincluding all necessary arrangements of both the blowers for oxidationall as specicfied and direcetednote : air diffuser will be paid seperatly 90 supplying, installing, testing, commissioningof centrifugal horizontal filter feedpumpscomplete in ci body& ci impeller with motor, pressure gauge with isolation cock, isolation valve, nrv on delivery line. isolation valve, strainer at suction. the pump shall be suitable for 415±10% volts 3 phase ac supply andtaking out of old unsv existing filter feed pump will be kept in store yard of age e / m iii complete all as specified and directed.pumps 02 nos. ( 1w + 1s ) flow rate ( each ) 525 lpmhead 25 30 m 91 s&f for filtrationplantverticaldownflowmultigradepressuresandfilterinmswelded construction fabricated in accordance with is 2825 from minimum 6 mm thick m.s. plate on shell andminimum 8mm thick m.s.plate ondished endsas perapplicable isstandards. thefilter shall have : ( a ) one no pressure tight manhole and at least one no. pressure tight side hole for maintenancepurposes. ( b ) initial charge of filter media. ( c ) complete underdrain system and raw water distributor as per manufacturers design. ( d ) m.s.heavyclassfabricated epoxycoated / postgalvanized facepipingcomprisingof connections with ci butterfly valvesof requiredsize forinlet, outlet, backwash inlet, backwash drain and rinse drain. air release line with gm ball valve of required size. ( e ) pressuregauges ( 100mmdiabourdontypepressuregauge ) / samplingpointswithss isolation cocks at inlet and outlet. ( f ) all internal parts of the filtration plant shall be coated with two coats of food grade epoxy paint after thorough sand blasting. all external surfaces of the plantincluding piping shall be coated with two coats of red iron oxide / zinc chromate primer followed by two coats of high gloss enamel paint . ( g ) the filter shall be complete with all gaskets / fasteners of standard quality as required. ( h ) thefiltershallbedesignedtogiveratedoutputatgivenrawwaterqualityandflowrate withoutanyoperationalproblem andshouldnotgetanylossofperformanceaslongasthe operating pressure remains within the given range. any additional provision is required to make theitem complete, thesameshouldbeincludedherein.theworkhastobecarriedthrough authorised vendor, dealer / representative of approved make. the filter water willbe suppliedto treated water tank through activated carbon filter, softener & uv water sterliser.capacity 525 lpm filtration rate 20, 000lph / sqm ( min. ) filter dia approx.1.05 m ( min. ) filter hos min. : 1800 mm ( min. ) working pressure :3.0 kg / sq cm.test pressure : 4.5 kg / sq cm no. of unit 1 set 92 supply and fixing activated carbon filter in ms welded construction fabricated in accordance with is 2825 from minimum 6 mm thick m.s. plate on shell and minimum 8 mm thick m.s. plate on dished ends as per applicable is standards. the filter shall have : ( a ) one no pressure tight manhole and at least one no. pressure tight side hole for maintenancepurposes. ( b ) initial charge of activated carbon ( c ) complete underdrain system and raw water distributor as per manufacturers design.d ) m.s.heavyclassfabricated epoxycoated / postgalvanized facepipingcomprisingof connections with ci butterfly valvesof requiredsize forinlet, outlet, backwash inlet, backwash drain and rinse drain. air release line with gm ball valve of required size. ( e ) pressuregauges ( 100mmdiabourdontypepressuregauge ) / samplingpointswithss isolation cocks at inlet and outlet. ( f ) all internal parts of the filtration plant shall be coated with two coats of food grade epoxy paint after thorough sand blasting. all external surfaces of the plantincluding pipingshall becoated with two coats of red iron oxide / zinc chromate primer followed by two coats of high gloss enamel paint . ( g ) the filter shall be complete with all gaskets / fasteners of standard quality as required.h ) thefiltershallbedesignedtogiveratedoutputatgivenrawwaterqualityandflowrate withoutanyoperationalproblem andshouldnotgetanylossofperformanceaslongasthe operating pressure remains within the given range. any additional provision is required to make theitem complete, thesameshouldbeincludedherein.theworkhastobecarriedthrough authorisedvendor, dealer / representativeof approvedmake. thewater shallbe receivedfrom pressure sand filter and supplied to softener & through uv sterliser before being sent to treated water tank.capacity 525 lpm, filtration rate 20, 000lph / sqm ( min. ) , filter dia approx.1.05 m ( min. ) , filter hos min. : 1800 mm ( min. ) , test pressure : 4.5 kg / sq cm, no. of unit 1 set 93 s&f uv water sterilisers ( between filter &clear water tank ) high performance on line uv water sterilizers of capacity 225lph designed on at least 250 j / sq. m. uv dosage, comprising of glass uv chamber in ss 316 housing, uv lamp and electrical circuit, wall mounted model / linemounted model, capacity 515lph, minimum lamp rating:150 watts 1 no. 94 material and labour for m.s. black pipe flange endheavy gradewith all fittings like elbow, tee reducer, flange nut bolt with washer including cutting, welding and joining etc as per site requirement and applying two coats of syntheticenamelpaintofapproved colourover acoat ofred oxideprimer includingtaking up / downof existing unserviceable pipe of any description complete of size 50mmall as specified and directed. note: fixing of pipe line will be carried out on wall or floor or trenchesand cost of the same will be deemed to be included in the rate quoted however for the pipe line laid under ground by digging trench will be paid saperately complete all as specified and directed. 95 all as per srlitem no. 94 above, here in before but 80 mm complete all as specified and directed. 96 all as per srlitem no. 94 above, here in before but 100 mm complete all as specified and directed. 97 supply and fix in replacement of ci butterfly valve of following size as per is 13095, pn 16, wafer type without lugs, suitable for clamping between flanges as per ansi b 16.1 ci 125, including flanges, fittings, gasket, nuts, bolts, washersetc.includingtakingup / downofexistingunserviceablebutterflyvalveofanydescription complete of size 50 mm all as specified and directed. make stolzel, leader / crawley / audco / l&t / zoloto 98 all as per srlitem no. 97 above, here in before but 80 mm complete all as specified and directed. 99 all as per srlitem no. 97 above, here in before but 100 mm complete all as specified and directed. 100 supply and fix in replacement of glass tube type air rotameterincluding taking down existing unserviceable air rotameter of any description complete all as specified and directed. 101 m&l forreplacement of unsv mbbr mediafrom the tank and supply of filling fresh media of mbbr media in the main reactor complete all as specified and directed of existing / suitable make with the following specificatios: effective surface area of media approx 400 sqm / cum ( b ) mesdia ht approx 15 / 10 mm ( c ) media dia approx 22 mm ( d ) weight per unit surface area approx 22 mm ( e ) voidage >093 gm / cucm ( g ) media fill range 25 55% of volume 102 m&l for replacing the damage / worn out of tube settler media with new one in the tube settler tank of size 2.5 x 4.5 x 6.5 complete all as specified and directed by engr in charge. 103 s&f rotational polyethylene water storage cylinderical vertical line with close top hoisted and fixed in position capacity of 10000 ltr including all necessary fittings and connections all as specified and directed including suitable size of foundation as per requuirment at site and inlet outlet connection complete all as specified and directed. 104 material and labour for brick protection with sub class b bricks old size, laid dry, flat over cable, perpendicular across the cable in trenches complete all as specified and directed. 105 providing and fixing hydropneumaticfilter press of 18 plates 600x 600 mm size, with suitable sludge pump ( screw type ) alongwith piping, fittings valve etc. complete all as specified and directed.filter press electrical & mechanical works 106 supply insattaltion testing and comissioning of electro magnatic flow meter for , measuring of inlet and out flow of sewage inlet and treated water. the meter will install with proper flange valve tee union with bypass arrangment complete all as specified and directed. 107 suppling and fixing of mechanicalbarscreenchamberwithminimumfreeboard300mmand minimumsize1.5mx0.8mx0.3mswd andadditionalmanualsuitablesize ssbarscreen is installedat suitableangleattheinletofraw sewagesumpbeforepumpingandmechanical system to collect and lifts / transport the screening material . the unit shall be designed for peak flow , andoneno.ssslottedadditionalmanualfinescreen2mm thickaftermechanicalbar screentobefixedinchamberitself.inletchamberofsuitable sizewithssmanualoperated spindleriser ss 304 gate shall also be provided before bar screen complete all as specified and directed. 108 supply, installation, testing and commissioning of sludge feed pumps screw type complete with all fittings & accessories. suitable motor of required hp & rpm operated on 415 volts ±10%, 3 phase, 50 hz a.c. supply with mounting m.s. fabricated common base plate, including sludge handling systemfoundation and foundation bolts. ( pump 2 nos. 1w+1s ) complete all as specified and directed.flow rate ( each ) 2 m3 / hrhead 30 to 35mtr 109 supply, installation, testing and commissioning of belt type oil skimmer, moc of drum , oil tray and accessories ss 304, structure of oil skimmer in msep complete all as specified and directed by engr in chargebelt size : 150mm free board 500mm, skimming capacity 40lphnote : tenderers may note that amount of credit rs 86, 064.00 will be deducted from the total amount arrived, at the time of acceptance of contract....
35783679 annual rate contract for transportation of project materials on pan india basis receiving & taking over, handling, transportation of project materials such as pipes, flanges, fittings, valves / filtering / metering skids / prs / pig traps & other equipmentsetc anywhere in india 2 the contractor shall receive and take over, handling including lifting of project materals, owner supplied bare / 3 lpe coated line pipe / ball valves, flanges, fittings, filtering, metering, prs skid, pig traps and any other material from gails source location, its transportation to designated location ( including transit insurance ) . all arrangements for loading of project materials at source location like wooden pegs / sleepers / required manpower / consumables are in contractors scope. 3 lcv 3 ton load capacity 4 shifting upto 0 50 km. 5 shifting above 50 km to 100 km ( in addition of sor a001110 ) 6 shifting above 100 km to 250 km ( in addition of sor a001110 ) 7 shifting above 250 km to 500 km ( in addition of sor a001110 ) 8 shifting above 500 km to 1000 km ( in addition of sor a001110 ) 9 shifting above 1000 km onward ( in addition of sor a001110 ) 10 truck 7 ton load capacity 11 shifting upto 0 50 km. 12 shifting above 50 km ( in addition of sor a001210 ) 13 shifting above 100 km to 250 km ( in addition of sor a001210 ) 14 shifting above 250 km to 500 km ( in addition of sor a001210 ) 15 shifting above 500 km to 1000 km ( in addition of sor a001210 ) 16 shifting above 1000 km onward ( in addition of sor a001210 ) 17 trailor 20 ton load capacity 18 shifting upto 0 50 km. 19 shifting above 50 km ( in addition of a001310 ) 20 shifting above 100 km to 250 km ( in addition of sor a001310 ) 21 shifting above 250 km to 500 km ( in addition of sor a001310 ) 22 shifting above 500 km to 1000 km ( in addition of sor a001310 ) 23 shifting above 1000 km onward ( in addition of sor a001310 ) 24 hydra / crane 12 / 14 ton load capacity on loading 25 hydra / crane 12 / 14 ton load capacity ( full time basis for 8 hrs ) ...
35353852 auction sale of tube wells ms clamp/bend/pipe/flange, ms scrap, angle iron closed box, tripod, stepped pole, steel rack...
35080733 supply of gasket top header to pipe flangegasket top header to pipe flange, gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629 [ warranty period: 30 months after the date of delivery ] => limited...
34987356 supply of flange cover for discharge pipe flange of btpn wagonflange cover for discharge pipe flange of btpn wagon, flange cover for discharge pipe flange of btpn wagon to rdso drawing no. wd 86081 s 65, alt. 13, item 11. => limited...
34785816 bids are invited for steel pipe flanges is:6392 (q3) total quantity : 200...
34452567 supply of pipe flanges at varanasi lpg swrf flange, 300cl, 0.5in , swrf flange, 300cl, 0.75in , swrf flange, 300cl, 1in , wnrf flange, 300cl, 1.5in , wnrf flange, 300cl, 2in , wnrf flange, 300cl, 3in , wnrf flange, 300cl, 4in , wnrf flange, 300cl, 6in , wnrf flange, 300cl, 8in , wnrf flange, 300cl, 10in , blind flange, 300cl, 2in , blind flange, 300cl, 3in , blind flange, 300cl, 4in , blind flange, 300cl, 6in , blind flange, 300cl, 8in , blind flange, 300cl, 10in , blind flange, 150cl, 2in , blind flange, 150cl, 3in , blind flange, 150cl, 4in , blind flange, 150cl, 6in , blind flange, 150cl, 8in , blind flange, 150cl, 10in , blind flange, 150cl, 12in , blind flange, 150cl, 14in , blind flange, 150cl, 24in , sorf flange, 150cl, 24in , sorf flange, 150cl, 16in , sorf flange, 150cl, 14in , sorf flange, 150cl, 12in , sorf flange, 150cl, 10in , sorf flange, 150cl, 8in , sorf flange, 150cl, 6in , sorf flange, 150cl, 4in , sorf flange, 150cl, 3in , sorf flange, 150cl, 2in , gi blind flange, 150cl, 8in , gi blind flange, 150cl, 6in , gi blind flange, 150cl, 4in , gi blind flange, 150cl, 3in , gi blind flange, 150cl, 2in , gi blind flange, 150cl, 1in , gi blind flange, 150cl, 0.5in , gi sorf flange, 150cl, 8in , gi sorf flange, 150cl, 6in , gi sorf flange, 150cl, 4in , gi sorf flange, 150cl, 3in , gi sorf flange, 150cl, 2in , gi swrf flange, 150cl, 1in , gi swrf flange, 150cl, 0.5in...
34025047 supply of a set of silicon rubber gasketa set of silicon rubber gasket, a set of silicon rubber gasket o rings suitable for transformer oil cooling pipes ( metalic pipes ) flange type a, b, c, d, f, g, k, l & m as per abb id no. 3ehn 424150 for wag 9 locos as per sketch no. els / aq / wag 9 / sk. no. 0033 / rev. o ( this is shelf life item and should be procured with staggered delivery period . supplier to mention / print date of manufacturing on the item & item to be supplied within 60 days of manufacture date ) ...
32926110 bids are invited for steel pipe flanges is:6392 (q3) total quantity : 200...
32756463 supply of a of silicon rubber gasketa of silicon rubber gasket,a set of silicon rubber gasket o rings suitable for transformer oil cooling pipes ( metalic pipes ) flange type a, b, c, d, f, g,k,l,& m as per abb id no. 3ehn 424150 for wag 9 loco. as per sketch no. els/aq/wag 9/sk. no. 0033/rev. o ( this is shelf life item and should be procured with staggered delivery period . supplier to mention / print date of manufacturing on the item & item to be supplied within 60 days of manufacture date) as per drg.no. sketch no. els/aq/wag 9/sk. no. 0033/rev. 0) smm/els/jhs , ncr uttar pradesh 7.00 set...
32360537 supply of set of flour silicon rubber o rings as per els/aq sketch no. els/aq/wag 9/sk.no.0033/rev 2, suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,l, k m as per abb id no: 3ehn.424150 clw specn no. clw/es/3/0142 alt f or latest for wag 9 loco.set of flour silicon rubber o rings as per els/aq sketch no. els/aq/wag 9/sk.no.0033/rev 2, suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,l, k m as per abb id no: 3ehn.424150 clw specn no. clw/es/3/0142 alt f or latest for wag 9 loco.,set of flour silicon rubber o rings as per els/aq sketch no. els/aq/wag 9/sk.no.0033/rev 2, suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,l, k & m as per abb id no: 3ehn.424150 & clw specn no. clw/es/3/0142 alt f or latest for wag 9 loco....
31644375 supply of set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no: 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag9/sk. no. 0033/rev 2.set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no: 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag9/sk. no. 0033/rev 2.,set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l & m as per abb id no 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag9​ /sk. no. 0033/rev 2....
31624755 supply of gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629,gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629...
31592681 supply of set of silicon rubber gasket o ring suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no. 3ehn 424150 for wag 9 loco as per sketch no. els/aq/wag 9 sk no. 0033/rev. 2, for details of items sketch of els/aq enclosed as per annexure.set of silicon rubber gasket o ring suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no. 3ehn 424150 for wag 9 loco as per sketch no. els/aq/wag 9 sk no. 0033/rev. 2, for details of items sketch of els/aq enclosed as per annexure.,set of silicon rubber gasket o ring suitable for transformer oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,k,l & m as per abb id no. 3ehn 424150 for wag 9 loco as per sketch no. els/aq/wag 9 sk no. 0033/rev. 2, for details of items sketch of els/aq enclosed as per annexure....
31487420 supply of gasket discharge pipe flangegasket discharge pipe flange,gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
31257309 e9110001 pipe flange eleptical , pipe flange eleptical ( for brake cylinder 8tk x 54 x 100lg ) as per drg. no. 27193401005 #5 rev04 or latest rev....
31245463 supply of gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629,gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629...
31244707 supply of set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no: 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag 9/sk. no. 0033/rev 2.set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l m as per abb id no: 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag 9/sk. no. 0033/rev 2.,set of silicon rubber gasket o rings suitable for transformer oil cooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l & m as per abb id no: 3ehn 424150 for wag 9 loco and els/aq sketch no. els/aq/wag 9/sk. no. 0033/rev 2....
31064310 supply of gasket discharge pipe flangegasket discharge pipe flange,gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
30726794 rate contract for composite works ( mechanical and electrical works ) for developement of different type of cng stations at various geographical areas in the states of bihar jharkhand madhya pradesh tamilnadu andhra pradesh and telangana ( group b ) 3 laying, testing and commissioning of ss tubes along with fittings as per technical specification, typical p & id for type of cng station and scope of work, handling, lifting, transportation from stores tocng stations. 4 ¾”od x 0.095” min wall thk.ss tube ( referts section iii a ) 5 ½”od x 0.083” min wall thk.ss tube ( referts section iii a ) 6 supply of ss tubes as per technical specification 7 ¾”od x 0.095” min wall thk., material ss316ss tube ( referts section iii a ) 8 ½”od x 0.083” min wall thk., material ss316 ss tube ( referts section iii a ) 9 supply of ss fittings, valves 10 quick connect body & stem 11 qrc of 3 / 8 npt , end connection:½ tube od, for stem & ½”npt ( f ) for body materialss316; rated pressure : 5000 psi @ 70°f temperature: 0°f to 400°f 12 plug 13 size : ½ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 14 size : ¾ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 15 caps 16 size : ½ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 17 size : ¾ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 18 union 19 size : ¾” od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 20 size : ½ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 21 reducing union 22 tube od 3 / 4 x tube od 1 / 2, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 23 equal tee 24 size:½” od x ½” od x ½” od, material:ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 25 size:¾ od x ¾ od x ¾ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 26 reducing union tee 27 ¾ od x ½ od x ¾ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 28 tube end connection 29 ½” tube end & ¾” od with ferrule fitting, ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 30 nut 31 ¾ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 32 ½ od, material : ss316 ( rated pressure : 6000 psi @ 70°f temperature : 0°f to 400°f ) 33 front ferrule 34 3 / 4 od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 35 ½ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 36 back ferrule 37 3 / 4 od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 38 ½ od, material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 39 male connector 40 size ¼” npt ( m ) x 3 / 8” od, ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 41 size 1 / 2” npt ( m ) x 3 / 8” od, ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 42 cross 43 3 / 4 od x 3 / 4”x 3 / 4 od x3 / 4 od material : ss316 ( rated pressure : 5000 psi @ 70°f temperature : 0°f to 400°f ) 44 ss ball valves, conforming to mecon’s technical specification no. mec / ts / 05 / 62 / 048 for ss ball valves of following sizes, specifications as indicated below : 45 2 way floating normal bore ball valve ¾ 46 2 way floating normal bore ball valve ½ 47 3 way trunnion mounted, reducer boreball valve ½ od end connection and ¼” npt ( f ) bottom end connection 48 conductive core thermoplastic hose 49 3 / 8” id conductive core thermoplastic hose for cng service with break away coupling ( 3 meter ) 50 supply , laying, testing and commissioning of ss 304 tubes along with isolation valves, reducers & fittings etc.as per technical specification, typical schematic drg. for ins. air line of cng station and scope of workincluding handling, storage, lifting, transportation upto cng stations. ( note:total no.offerrule fittings may be considered as one jointing ferrule at every 5.0 m ) 51 1 / 4”od x 0.035” min wall thk.ss tube ( referts section iii a ) 52 section b : erection of mech. equipment 53 handling ( including lifting and transportation from clients store within city tocng stations ) and erecting in position, the following equipmenteither on the foundation at ground level or on roof at 3.5 m above ground level.contractors scope shall include supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc. : 54 cascade 4500 / 3000 l water capacity. erection at + 4.0 m level ( referts section iii b ) 55 cascade 4500 / 3000 l water capacity, erection at + ground level ( refer ts section iii b ) 56 dispenser erection at + ground level 57 note:the quantities given above against individual items are indicative and shall not be considered to be binding.the quantities may increase or decrease at site at the time of actual execution and as per the discretion of owner / engineer in charge.the unit rate shall be operated to work out the final payment due to contractor. 58 section b.1 : erection of mech. equipment ( transportation not required ) 59 handling ( including lifting within cng stations ) and erecting in position, the following equipmenteither on the foundation at ground level or on roof at 3.5 m above ground level.contractors scope shall include supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc. : 60 cascade 4500 / 3000 l water capacity. erection at + 4.0 m level ( referts section iii b ) 61 cascade 4500 / 3000 l water capacity, erection at + ground level ( refer ts section iii b ) 62 dispenser erection at + ground level 63 note:the quantities given above against individual items are indicative and shall not be considered to be binding.the quantities may increase or decrease at site at the time of actual execution and as per the discretion of owner / engineer in charge.the unit rate shall be operated to work out the final payment due to contractor. 64 section c : supply, erection & commissioning of miscellaneous item 65 supply, erection & commissioning of following miscellaneous items as per technical specification and at locations ( within the stations ) as directed by eic 66 fire fighting equipments ( referts section iii c ) 67 dcp 10 kg 68 dcp 75 kg ( trolley mounted ) 69 co2 – 4.5 kg ( portable ) 70 sand bucket with stand and canopy ( 4 nos. on each stand ) 71 wind socks 72 section d : supply and installation of aboveground steel piping at cng stations. 73 supply of assorted pipe, fittings and flanges 74 complete work of supply of pipes, flanges and fittings including all taxes, duties, transportation and inspection charges but not limited to, the following itemsin accordance with pms ( piping material specification ) , relevant specifications & drawings indicated in scope of work indicated in scc and instructions of engineer in charge and as per all provisions of the contract document. 75 handling including lifting, transportation from contractor stores to contractors workshop for fabrication and / or to work site for field fabrication and erection for all piping items supplied by contractor. 76 carbon steel pipe 77 size rating / schedule 78 4 nb, be ( astm a106, gr. b ( charpy ) , seamless, be ) s80 79 2 nb, be ( astm a106, gr. b ( charpy ) , seamless, be ) xs xs 80 1 nb, be ( astm a106, gr. b, seamless, pe ) xsxs 81 3 / 4 nb, be ( astm a106, gr. b, seamless, pe ) s160xs 82 flanges 83 weld neck ( b 16.5, a105 ( charpy ) , 125 aarh, rf ) ( end thickness to match pipe thickness ) 84 sizerating / schedule 85 4 nb, rf 300# 86 2 nb, rf 300# 87 socket welded ( b 16.5, a105, 125 aarh, sw end to b16.5 ) 88 1nb, rf 300# 89 3 / 4 nb rf300# 90 blind flanges ( b 16.5, a105 ( charpy ) , 125 aarh, rf ) 91 size rating / schedule 92 4 nb, rf 300# 93 2 nb, rf 300# 94 blind flanges ( b 16.5, a105, 125 aarh, rf ) 95 1nb, rf 300# 96 3 / 4 nb rf300# 97 elbow 98 elbow, 90° elbow ( a234, gr. wpb ( charpy ) , b 16.9, 1.5d ) , bw 99 size rating / schedule 100 4 nb s80 101 2 nbxs 102 elbow, 45° elbow ( a234, gr. wpb ( charpy ) , b 16.9, 1.5d ) , bw 103 size rating / schedule 104 4 nb s80 105 2 nbxs 106 tees ( seamless ) 107 tee, equal / reducing tee ( a234, gr. wpb ( charpy ) , b 16.9, 1.5d ) , bw 108 size rating / schedule 109 4nb s80 110 2nb xs 111 4x 2nbs80 x xs 112 sockolet ( a105 ) , sw, 6000#, mss sp 97 113 sizerating / schedule 114 4 x 1nbs40 x xs 115 4 x ¾ nbs40 x s160 116 2 x 1nb xs x xs 117 2 x ¾ nbxs x s160 118 end caps ( a 234 gr. wpb ( charpy ) , bw ) 119 sizerating / schedule 120 4 nbs80 121 reducer ( a234 gr. wpb, b.16.9 ) 122 sizerating / schedule 123 4 nb x 2 nbs80 x xs 124 note:i ) the quantities mentioned above are tentative.ii ) for all the supply items mentioned above, procurement shall be made as per specification after due approval of engineer in charge. 125 supply of valves 126 complete work of supplyof valves including all taxes, duties, transportation and inspection charges but not limited to , the following items in accordance with relevant specifications & relevant data sheets indicated inscope of work indicated in scc, drawings, specification and instructions of eic and as perall provisions of the contract document. 127 flanged / welded valves ( full bore / reduced bore ) 128 plug valves 129 bw 130 sizerating / schedule 131 2 nbbw 300# 132 ball 133 sizerating / schedule 134 4 nbbw , fb300# 135 2 nbbw , fb300# 136 2 nbfe , fb300# 137 sockolet welded valve ( ball valve ) 138 sizerating / schedule 139 1 nb sw, fb 800# 140 ¾ nbsw, fb 800# 141 complete carbon steel aboveground piping work with painting including all fittings, flanges and supply of all required gaskets, vent flappers, studs bolts & nuts etc. as described under item 1.0 above 142 carbon steel pipe ( a 106, gr. b, seamless, b 36.10 ) 143 size rating / schedule 144 4 nb, be ( astm a106, gr. b ( charpy ) , seamless, be ) s80 145 2 nb, be ( astm a106, gr. b ( charpy ) , seamless, be ) xsxs 146 1 nb, be ( astm a106, gr. b , seamless, pe ) xsxs 147 3 / 4 nb, be ( astm a106, gr. b, seamless, pe ) s160xs 148 note:1 ) pipe specification and thickness may vary depending upon availability of pipe.no extra payment shall be made for this.2 ) all butt welded fittings end shall generally match with connecting pipe wall thickness. however, in case of misalignment, contractor shall have to do end preparation without any extra cost. 3 ) all coupling, nipples stud, bolts, nuts, gaskets and vent flapper etc. as required shall be suplied by contractor but no separate payments shall be made as it is covered under erection rate. 149 radiography 150 performance of radiographic inspection by gamma radiation as per scope of work and as per specifications in piping of all types and thickness including providing / hiring of all necessary equipments, supply of all consumables, and whatever else even though not expressely mentioned but required to perform the work as per specifications and instructions of engineer in charge ( full circle re radiography of the repaired joint and additional radiography necessitated due to poor performance of contractors welder shall be carried out by the contractor at his own cost and shall not be paid extra by company ) .radiographs shall be submitted to the engineer in charge for acceptance, whose decision shall be final and binding. 151 size 152 4 nb 153 2 nb 154 note:i ) the quantities mentioned above are tentative. 155 aboveground erection of valves 156 handling including lifting and transportation from companys warehouse to contractors stores and / or work site and installation of all types of valves, insulating joint, flow tee including assembly of valve accessories, ( if any ) by bolting, threading or welding, supply and insertion of gaskets, nuts & bolts, nipples, etc. at all elevations of pipe sleepers, supports or overhead on racks, equipments nozzle, skid & painting etc. supply of all consumables, manpower, equipment, etc. for completion of all works as per scope of work and as per drawings, specifications and instructions of engineer in charge including servicing / cleaning of valve wherever requried. 157 flanged / welded valves ( full bore / reduced bore ) 158 plug valves 159 bw 160 sizerating / schedule 161 2 nbbw 300# 162 ball 163 sizerating / schedule 164 4 nbbw , fb300# 165 2 nbbw , fb300# 166 2 nbfe , fb300# 167 sockolet welded valve ( ball valve ) 168 sizerating / schedule 169 1 nb sw, fb 800# 170 ¾ nbsw, fb 800# 171 pressure gauges 172 supply, installation and calibration of pressure gauges and their accessories inclusive of supply of necessary piping materials / tubings alongwith all necessary valves & fittings, fabrication and installation of impulse lines / manifolds as per d. s. no. mec / 23h7 / 05 / e5 / i / 001 / ds pg. 173 structural works 174 pipe supports & other structures 175 supply, fabrication and erection of all types of pipe supports like clamps, saddle, guide stops, cradles, turn buckles, anchors, t posts; stockade / trestle and pipe bridge for overhead piping; frames for canopy, approach ladders and platforms, crossover, cable tray supports, etc. including painting suitable for highly corrosive area as per specificationlabour and supervision & complete work as per drawings, specifications and instruction of engineer in charge. ( bolts, nuts, washers, pvc coated u clamps etc. for supporting shall be supplied by the contractor within the rates quoted.these items will not be measured and paid seperately ) .the work is to be completed in all respect as per scope of work and specification. 176 notes: 177 the quantities indicated above are tentative estimated values and hence are approximate. final payment will be made based on actual quantities to be certified by the owner / owner representative. 178 the cost of ms bolts ( permanent and service ( , washers, electrodes, putty, gases, cost of straightening the raw materials, cutting of flats from plates and providing splices, paints, tools, plants etc., as required for the work shall be deemed to be included in the quoted rates. 179 all handling and transport charges of raw materials and fabricated structures including double handling, as required, for completion of work in accrodance with time schedule, are deemed be included in the quoted rates. 180 plain cement concrete 181 providing, laying in position, construction and handing over of pcc in all types of concrete works including levelling courses below foundations, mass concrete works, chambers, cable trench, under floors and any other locations ( which are not covered as part of respective items of sor ) , at all levels and locationsetc complete in all respects as per scope of work, detailed construction drawings, technical specifications and direction of engineer in charge. 182 a ) pcc m 15 ( 1:2:4 ) [ 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size ] 183 note: 184 1. rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement, coarse sand and coarse aggregates, other minor construction materials, shuttering, staging, shoring / strutting, finishing, etc. with all bye works and sundry works. 185 2. to be read in conjunction with relevent clause of pjs. 186 conversion of dbs to online / mother station 187 decommissioning of ss tubing, dismentalling of ss tubing, providing connections with online compressor / cascade / dispenser as required including installation of fittings & relacement of damaged fittings ( supply to be as per relevant sor item ) , retesting of already laid tubings, installation of valves ( supply as per relevant sor ) , providing as build p&id drawings, etc.completing all tubing / mechanical work to complete the conversion of dbs to online station. any fresh supply & laying of ss tubing to be paid separately as per relevant sor item. 188 disconnecting / reconnecting all air piping / tubing , loading, transportation & unloading of compressor at designated locaation ( within ga boundary ) , 189 disconnecting all electrical connections with booster compressor / panel / other equipment, relaying / testing of used cables if required, disconnection of earthing grid from compressor / panel / other equipment & recoonection with online compressor, repair of earth elecrodes etc. any fresh supply and laying of cable / gi strip / earthing electrod to be paid as per relevant sor 190 architectural works 191 supplying and installing mandatory sign made of 4mm thick. acm ( alstrong / aludecor / alucobond ) sheets cladded on structural framework. matter / logo in retro reflective sheeting ( avery / 3m / equ. ) type xi dg3 microprismetice as per astm d 4956 09 duly pasted on acm in required size & shape, all complete with by works, as approved. 192 300mm x 600mm 193 electrical works ( supply ) 194 design, engineering, manufacture, shop testing, supply includingpacking and forwarding, transportation, delivery at storage and from storage to site of power distribution board ( pdb ) and lighting distribution board ( ldb ) : 195 415 v, 30 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076.dual incomer 125 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 80 amp tpn mccb ( with tm based o / c, s / c & e / f relase with u / v protection for booster feeder only ) outgoing with hrc fuses 2 nos. 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 196 415 v, 30 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer 100 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 63 amp tpn mccb ( with tm based o / c, s / c & e / f relase with u / v protection for booster feeder only ) outgoing with hrc fuses 2 nos. 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 197 415 v, 36 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer of 400 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) and 63a 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 400 amp tpn mccb ( with tm based o / c, s / c & e / f relase ) outgoing with hrc fuses 2 nos. 32 amp tpn mcb, 2 nos 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 198 415 v, 36 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer of 315 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) and 63a 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 250 amp tpn mccb ( with tm based o / c, s / c & e / f relase ) outgoing with hrc fuses 2 nos. 32 amp tpn mcb, 2 nos 32 amp tpn mcboutgoing with hrc fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 199 floor mounted apfc panel of 40kvar capacitor bank in steps of 4x2.5, 4x5, 10 & 20 capacitor of min 10 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 200 floor mounted apfc panel of 50kvar capacitor bank in steps of 4x2.5, 4x5, 10 & 20 capacitor of min 10 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 201 floor mounted apfc panel of 10kvar capacitor bank in steps of 4x2.5capacitor of 4 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 202 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 125a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 95 / 50 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 203 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 315a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 120 / 95 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 204 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 400a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 240 / 150 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 205 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 100a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 95 / 50 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 206 design, engineering, supply includingpacking and forwarding, transportation, delivery at storage, of the complete earthing and lightning protection system, earth electrodes / pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes / flanges including all associated civil work with all material ( like bitumen coating ) and labour as per specification and drawings approved by the company in with is 3043. 207 earth pits gi pipe electrode with 6 mm thick chequered plate cover 208 earth pits copper plate electrode with 6 mm thick chequered plate cover 209 gi strip ( 50x6 ) mm 210 gi strip ( 25x3 ) mm 211 gi lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved drawings, specifications and directions of engineer in charge. 212 advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per is 3043 / ieee 80. 213 25 sq mm green fexible copper wire ( approx 10mtrs ) along with two nos clamps harware etc shall be complete including mettalic cover box ( suitable for outdoor ) , size 400x400x200 in all respect to earthing / ground of lcv at two points. 214 design, engineering, supply includingpacking and forwarding, transportation, delivery at storage, of the 1.1kv grade xlpe insulated, pvc sheathed, frls power and control cables ( conforming to is:7098 and specification ) of following sizes in trenches / excavated under ground trench / trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc. 215 3.5x 150 mm2 a2xfy 216 3.5x 120 mm2 a2xfy 217 3.5x 50 mm2 a2xfy 218 4x 25 mm2 a2xfy 219 4x10 mm2 2xwy 220 4x 6 mm2 2xwy 221 4x 2.5 mm2 2xwy 222 2x 1.5 mm2 2xwy 223 supply includingpacking and forwarding, transportation, delivery at storage of lighting fixtures complete with mounting bracket, flame proof / non flame proof, control gear box as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of engineer in charge. work to be completed in all respects. 224 street lighting, integral flame proof well glass fixture ( cmifr approved for zone 1 / 2 gas group iia & iib ) with 100 w led luminaire with flame proof control gear model no. flpw 1095 of baliga make or equivalent ) 225 supply of integral flame proof flood light fixture ( cmifr approved for zone 1 / 2 gas group iia & iib ) with 100 led luminaire baliga make or equivalent ) 226 supply of the underlights for the canopy as specified including lighting fixture flame proof enclosure for bulk head fitting ( bh / oa / 124, 1 x led, 150w ) of sudhir make or equivalent, juction boxes etc. as requried. 227 street lighting pole 6mtr high gi octagonal pole ( type bop 6030 of bajaj make or equivalent ) complete with bracket, gi clamps for fixing flame proof control gear box as per standard drawing ( mec / sd / 05 / e9 / 77 / 04 ) & specification ( mec / ts / 05 / e9 / 077b ) . 228 supply of point wiring as per details in construction drawing & specificationincludespvc conduits in ceiling, complete wiring including flexible wire ( fr pvc ) , switch boxes & switches ( anchor roma make or equivalent ) , multi strand flexible hr pvc insulated copper conductor wires / cables for following items 229 light point 230 surface / recess mounted led light fixrure with led lamp ( type lctl 18 cdl of cg make or equivalent ) . 231 industrial flame proof fluorescent lamp / led fitting with lamp ( type extl 240 of cg make or equivalent ) . 232 flame proof ( cmifr approved ) 12 exhaust fan.0.25hp motor, 1440 rpm. ( preferred make: baliga, fcg, cgl, prompt ) 233 socket outlet ( 5 / 15 amp combination ) of anchor roma make or equivalent 234 wall mounted fan with electronic regulator ( energy efficent, 50w, ) etc complete in all respect for wall mounting 235 ups system 236 design, supply, packing, forwarding, delivery by equipment supplier at site including commissioning spares as requiredof ups systems as per specification, block diagram and following rating : 237 3kva, 230 v single phase, 50 hz, single industrial type, ups system suitable for input power supply voltage of 320v 460v tpn ( 184 265v / ph ) , output 230 v + / 1%, ac with bypass supply, battery bank , acdb ( incomer 32a dp mcb & outgoing 2 nos. 6a dp mcb & 6 nos.10a dp mcb ) and 4.0 hrs. battery backup ( vrla, 12v ) and battery capacity shall not be less than 18 kvah ( where kvah = battery ah x 12 v x no. of batteries ) . main input transformer rating shall not be less than 9 kva, as per block diagram, specification & data sheet and shall be complete in all respect. .all interconnecting cables among ups, rectifier, battery stand, acdb / dcdbetc ( 20 mtr shall be considered between battery bank and ups panel, 20 mtr cable shall be considered between acdb and ups panel and any other cable which is not defined here but necessary for satisfactory operation of the ups system ) .make: m / s hirel, m / s dubas and m / s synergy systems 238 supply of following sizes ofhdpe pipein required length , supply of clamps, small iron structures, spacersplugs, sealent etc. and materials complete as per approved drawingsand directions of engineer in charge. 239 50 mm nb 240 100 mm nb 241 supply of following hot dip galvanized ladder / perforated typecable trays ( as per is 2629 ) including bends, tee, crosses, horizontal and vertical splices along with cable tray cover ( wherever required for asthetic look ) etc. as required including supply of all g.i hardwares, all labour and material as required as per standard drawings, specification and direction ofengineer in charge 242 perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized ( 86 microns ) of following sizes. 243 150mm wide 244 300mm wide 245 erection material 246 supply of ms base frame support for switch gear and bracket for misc. electrical equipment, cable tray support out of roled ms section, pipes, plates etc including welding, bolting, reveting, supply of necessary anchor bolts and grouting etc supply of paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including supply of all gi hardware materials including all labour and materials complete as required and the direction of engineer in charge. 247 for mother station ( gas engine ) 248 for mother station ( motor ) 249 for on line ( motor ) 250 for dbs ( motor ) 251 supply of the following including the supply of necessary clamp, bolts, rawl plugs etc. breaking and making good of walls, if required , and including all labour and materials complete as per directions of engineer in charge, applicable standards and indian electricity rules. 252 shock hazard charts complete with frame and glass 253 first aid boxes 254 carbon di oxide ( co2 ) type fire extinguisher 4.5 kg capacity complete with gunmetal valve conforming to is : 3224 with isi mark , discharge horn with bend & wall fixing bracket with mfg. test certificate 255 caution boards ( danger, high volatage ) including supply of necessary clamps, bolts and other hardware. 256 single line diagram complete in glass frame. ( size 600x800mm ) 257 supply ofinsulating mats 11kv grade ( as per is:15652 2006 ) of 1000mm width, required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of engineer in charge as per applicable indian or international standards and indian electricity rules. 258 supply of electrical accessories including, cable tags, cable tie , flexible pvc conduit, cable marker, nickle plated lugs, double compressed brass cable glands, brass adaptar / reducers / nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of engineer in charge. 259 for mother station ( gas engine ) 260 for mother station ( motor ) 261 for on line ( motor ) 262 for dbs ( motor ) 263 telephone & lan 264 supply of telephone sockets ( piano reed type ) in recess pvc conduit including pvc conduit, telephone socket, cable, accessories etc as required. 265 supply of lan sockets in recess pvc conduit including pvc conduit, telephone socket, cable, accessories etc as required. 266 supply of 2 pairs, 0.61mm, telephone cable / wire, includingaccessories etc as required. 267 supply of utp cable ( cat 6 ) , make : d link / amp / lucent 268 electrical works ( erection ) 269 erection, testing and commissioning of power distribution board ( pdb ) and lighting distribution board ( ldb ) : 270 415 v, 30 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer 125 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 80 amp tpn mccb ( with tm based o / c, s / c & e / f relase with u / v protection for booster feeder only ) outgoing with hrc fuses 2 nos. 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 271 415 v, 30 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076.dual incomer 100 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 63 amp tpn mccb ( with tm based o / c, s / c & e / f relase with u / v protection for booster feeder only ) outgoing with hrc fuses 2 nos. 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 272 415 v, 36 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer of 400 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) and 63a 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 400 amp tpn mccb ( with tm based o / c, s / c & e / f relase ) outgoing with hrc fuses 2 nos. 32 amp tpn mcb, 2 nos 32 amp tpn mcboutgoing with fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 273 415 v, 36 ka single front floor mounted type indoor pdb to receive input power at cng station consisting ofbus bar chamber, cable alley, complete with wiring, indication lamp, ammeter, voltmeter, mfm ( multi function meter ) etc including all labour and materials with operating mechanism, all accessories, mandatory spares as per data sheet, auxiliariesetc complete in all respects as specified in technical specification, data sheet & sld no. mec / / 05 / e9 / e / 1081a & as per standard specification no. : mec / ts / 05 / e9 / 076 .dual incomer of 315 amp 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) and 63a 4p mccb ( with micro processor and based o / c, s / c & e / f relase with lsig & shunt trip ) with electrical insterlock ( auto / mannual ) by power contactors , start / stop push button with adjustable no / nc.outgoing with 2 nos. 250 amp tpn mccb ( with tm based o / c, s / c & e / f relase ) outgoing with hrc fuses 2 nos. 32 amp tpn mcb, 2 nos 32 amp tpn mcboutgoing with hrc fuse 3 nos. dp mcb 10 amp with timer ( 24hrs ) auto / mannual and with fuse 3 nos. dp mcb 10 amp without timer. 274 floor mounted apfc panel of 40kvar capacitor bank in steps of 4x2.5, 4x5, 10 & 20 capacitor of min 10 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 275 floor mounted apfc panel of 50kvar capacitor bank in steps of 4x2.5, 4x5, 10 & 20 capacitor of min 10 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 276 floor mounted apfc panel of 10kvar capacitor bank in steps of 4x2.5capacitor of 4 nos, consisting ofbus bar chamber, cable alley, incoming ( fsu ) , all outgoing feeder ( fsus ) as specified in tender drg. no. mec / / 05 / e9 / e / 1081b and as per specification no. mec / ts / 05 / e9 / 076 277 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 125a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 95 / 50 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 278 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 250a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 120 / 95 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 279 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 400a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 240 / 150 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 280 outdoor type dust & weather proof sheet steel ( 2 mm thick ) enclosed mccb of following rating for mounting on wall or pedestal. 100a, 415v, 3 pole & neutral ac 23 duty and suitable for termination of 3.5 x 95 / 50 sq.mm a2xfy cable on incomer terminals andoutgoing terminals. 281 erection, testing and commissioning of 415v / 240v lighting / power panels, surface / recess mounting type in weather / flame proof ( with hinged cover ) sheet steel enclosure of approved make having 4 pole mccb ( lsig ) / rccb ( mcb + elcb ) as incoming andsp / dp / tp mcb ( 9ka type ) for out going circuit complete with wiring, indication lamp, ammeter etc including all labour and materials as per specification and the direction of engineer in charge. 282 earth pits gi pipe electrode with 6 mm thick chequered plate cover 283 earth pits copper plate electrode with 6 mm thick chequered plate cover 284 gi strip ( 50x6 ) mm 285 gi strip ( 25x3 ) mm 286 gi lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved drawings, specifications and directions of engineer in charge. 287 advance maintenance free earthing system with 3mtr earth electrode of low carbon steel with 250 micron copper coating with carbon based backfill compound as per is 3043 / ieee 80. 288 25 sq mm green fexible copper wire ( approx 10mtrs ) along with two nos clamps harware etc shall be complete including mettalic cover box ( suitable for outdoor ) , size 400x400x200 in all respect to earthing / ground of lcv at two points. 289 laying, termination, glanding, testing of the 1.1kv grade xlpe insulated, pvc sheathed, frls power and control cables ( conforming to is:7098 and specification ) of following sizes in trenches / excavated under ground trench / trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc. 290 3.5x 150 mm2 a2xfy 291 3.5x 120 mm2 a2xfy 292 3.5x 50 mm2 a2xfy 293 4x 25 mm2 a2xfy 294 4x10 mm2 2xwy 295 4x 6 mm2 2xwy 296 4x 2.5 mm2 2xwy 297 2x 1.5 mm2 2xwy 298 erection, testing and commissioning of lighting fixtures, pole complete with mounting bracket, flame proof / non flame proof, control gear box as per the type of fixture, lamps etc. including civil work with pipe inserts for cables and connecting work, with all material and labour as per specifications, drawings and instruction of engineer in charge.work to be completed in all respects. 299 street lighting, integral flame proof well glass fixture ( cmifr approved for zone 1 / 2 gas group iia & iib ) with 72 w led luminaire with flame proof control gear model no. flpw 1095 of baliga make or equivalent ) 300 integral flame proof flood light fixture ( cmifr approved for zone 1 / 2 gas group iia & iib ) with 72 w led luminaire baliga make or equivalent ) 301 underlights for the canopy as specified including lighting fixture flame proof enclosure for bulk head fitting ( bh / oa / 124, 1 x led, 150w ) of sudhir make or equivalent, juction boxes etc. as requried. 302 street lighting pole 6mtr high gi octagonal pole ( type bop 6030 of bajaj make or equivalent ) complete with bracket, gi clamps for fixing flame proof control gear box as per standard drawing ( mec / sd / 05 / e9 / 77 / 04 ) & specification ( mec / ts / 05 / e9 / 077b ) . 303 erection, testing & commissioning of point wiring as per details in construction drawing & specificationincludespvc conduits in ceiling, complete wiring including flexible wire ( fr pvc ) , switch boxes & switches ( anchor roma make or equivalent ) , multi strand flexible hr pvc insulated copper conductor wires / cables for following items 304 light point 305 surface / recess mounted led light fixrure with led lamp ( type lctl 18 cdl of cg make or equivalent ) . 306 industrial flame proof fluorescent lamp / led fitting with lamp ( type extl 240 of cg make or equivalent ) . 307 flame proof ( cmifr approved ) 12 exhaust fan.0.25hp motor, 1440 rpm. ( preferred make: baliga, fcg, cgl, prompt ) 308 socket outlet ( 5 / 15 amp combination ) of anchor roma make or equivalent 309 wall mounted fan with electronic regulator ( energy efficent, 50w, ) etc complete in all respect for wall mounting 310 ups system 311 erection, testing and commissioning by equipment manufacturer at site including commissioning spares as requiredof ups systems as per specification, block diagram and following rating : 312 3kva, 230 v single phase, 50 hz, single industrial type, ups system suitable for input power supply voltage of 320v 460v tpn ( 184 265v / ph ) , output 230 v + / 1%, ac with bypass supply, battery bank , acdb ( incomer 32a dp mcb & outgoing 2 nos. 6a dp mcb & 6 nos.10a dp mcb ) and 4.0 hrs. battery backup ( vrla, 12v ) and battery capacity shall not be less than 18 kvah ( where kvah = battery ah x 12 v x no. of batteries ) . main input transformer rating shall not be less than 9 kva, as per block diagram, specification & data sheet and shall be complete in all respect. make: m / s hirel, m / s dubas and m / s synergy systems.all interconnecting cables among ups, rectifier, battery stand, acdb / dcdbetc ( 20 mtr shall be considered between battery bank and ups panel, 20 mtr cable shall be considered between acdb and ups panel and any other cable which is not defined here but necessary for satisfactory operation of the ups system ) . 313 erection of following sizes of hdpe pipe including bend route as required length , clamps, small iron structures, spacersplugs, sealent etc. and materials complete as per approved drawingsand directions of engineer in charge. 314 50 mm nb 315 100 mm nb 316 erection, testing and commissioning of following hot dip galvanized ladder / perforated typecable trays ( as per is 2629 ) including bends, tee, crosses, horizontal and vertical splices along with cable tray cover ( wherever required for asthetic look ) etc. as required including all g.i hardwares, all labour and material as required as per standard drawings, specification and direction ofengineer in charge 317 perforated type, made from 50mm height and 2.5 mm thick sheet steel & galvanized ( 86 microns ) of following sizes. 318 150mm wide 319 300mm wide 320 erection material 321 erection, fixing and commissioning of ms base frame support for switch gear and bracket for misc. electrical equipment, cable tray support out of roled ms section, pipes, plates etc including welding, bolting, reveting, necessary anchor bolts and grouting etc paints applying one coat of anti rust primer two finish coats of approved synthetic enamel paints including bracking walls, floors etc for structure as required including all gi hardware materials including all labour and materials complete as required and the direction of engineer in charge. 322 for mother station ( gas engine ) 323 for mother station ( motor ) 324 for on line ( motor ) 325 for dbs ( motor ) 326 erection and commissioning of the following including necessary clamp, bolts, rawl plugs etc. breaking and making good of walls, if required , and including all labour and materials complete as per directions of engineer in charge, applicable standards and indian electricity rules. 327 shock hazard charts complete with frame and glass 328 first aid boxes 329 carbon di oxide ( co2 ) type fire extinguisher 4.5 kg capacity complete with gunmetal valve conforming to is : 3224 with isi mark , discharge horn with bend & wall fixing bracket with mfg. test certificate 330 caution boards ( danger, high volatage ) including supply of necessary clamps, bolts and other hardware. 331 single line diagram complete in glass frame. ( size 600x800mm ) 332 laying and pasting ofinsulating mats 11kv grade ( as per is:15652 2006 ) of 1000mm width, required for maintenance of electrical equipment in substation as required including cutting to required shape in running length and including all labour and materials etc. complete and as per directions of engineer in charge as per applicable indian or international standards and indian electricity rules. 333 erection, commissioning and fixing of electrical accessories including, cable tags, cable tie , flexible pvc conduit, cable marker, nickle plated lugs, double compressed brass cable glands, brass adaptar / reducers / nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of engineer in charge. 334 for mother station 335 for bus depo 336 for dbs / ro / online 337 for dcu 338 telephone & lan 339 installation, testing and commissioning of telephone sockets ( piano reed type ) in recess pvc conduit including pvc conduit, telephone socket, cable, accessories etc as required. 340 installation, testing and commissioning of lan sockets in recess pvc conduit including pvc conduit, telephone socket, cable, accessories etc as required. 341 installation, testing and commissioning of 2 pairs, 0.61mm, telephone cable / wire, includingaccessories etc as required. 342 installation, testing and commissioning of utp cable ( cat 6 ) , make : d link / amp / lucent 343 all works relating to statutory approvals of the installation from competent authority like electrical inspectorate, cea, dgms, seb etc. including carrying out of all required modifications in design / manufacturer / installation to meet the requirement of indian electricity rules and other statutory regulations in force, carrying out necessary paper work and liasion with the authorities to obtain all necessary clearances for charging of installation as per relevant national standards for mother cng station. however the official fees towards the approvals shall be reimbursed by the client....
30234514 supply of gasket discharge pipe flangegasket discharge pipe flange,gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years] => limited...
29742567 auction sale of lot no: 3 lot name: unsable misc ms scrap i e cut piece of ms pipes/flanges etc...
29397183 supply of gasket discharge pipe flangegasket discharge pipe flange,gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
29369651 supply of set of silicon rubber gasketset of silicon rubber gasket,set of silicon rubber gasket o rings suitable for transformer oilcooling pipes (metalic pipes) flange type a,b,c,d,f,g,k,l & m as per abb id no: 3ehn424150 for wag 9 loco and els/aq sketch no. els/aq/wag 9/sk. no. 0033/rev 2....
28885138 supply of gasket discharge pipe flangegasket discharge pipe flange,gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
28310669 supply of a set of silicon rubber gasketa set of silicon rubber gasket, a set of silicon rubber gasket o rings suitable for transformer oil cooling pipes ( metalic pipes ) flange type a, b, c, d, f, g, k, l, & m as per abb id no. 3ehn 424150 for wag 9 loco. as per sketch no. els / aq / wag 9 / sk. no. 0033 / rev. o ( this is shelf life item and should be procured with staggered delivery period .supplier to mention / print date of manufacturing on the item & item to be supplied within 60 days of manufacture date ) as per drg.no. sketch no. els / aq / wag 9 / sk. no. 0033 / rev. o ) ...
28296638 supply of gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629,gasket top header to pipe flange as per drg.no. 9572322 alt a specn: ems 629...
28283670 supply of gasket discharge pipe flangegasket discharge pipe flange, gasket discharge pipe flange to c.rly. drg. no. ci / cr 84 alt.4 [ self life 2 years ] ...
28127391 supply of a set of silicon rubbera set of silicon rubber, a set of silicon rubber gasket o rings suitable for transformer oil cooling pipes ( metalic pipes ) flange type a, b, c, d, f, g, k, l, & m as per abb id no. 3ehn 424150 for wag 9 loco. as per sketch no. els / aq / wag 9 / sk. no. 0033 / rev. o ( this is shelf life item and should be procured with staggered delivery period . supplier to mention / print date of manufacturing on the item & item to be supplied within 60 days of manufacture date ) as per drg.no. sketch no. els / aq / wag 9 / sk. no. 0033 / rev. o specn: ...
28050830 supply of gasket discharge pipe flangegasket discharge pipe flange, gasket discharge pipe flange to c.rly. drg. no. ci / cr 84 alt.4 [ self life 2 years ] ...
27306945 supply of gasket discharge pipe flangegasket discharge pipe flange to c.rly. drg. no. ci / cr 84 alt.4 [ self life 2 years ] ...
25563556 supply of , a set of silicon rubber gasket o rings suitable for transformer oil cooling pipes ( metalic pipes ) flange type a, b, c, d, f, g,k,l,& m as per abb id no. 3ehn 424150 for wag 9 loco. as per sketch no. els/aq/wag 9/sk. no. 0033/rev. o ( this is shelf life item and should be procured with staggered delivery period . supplier to mention / print date of manufacturing on the item & item to be supplied within 60 days of manufacture date) as per drg.no. sketch no. els/aq/wag 9/sk. no. 0033/rev. o specn: ...
24741280 supply of , gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
23919940 supply of , gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
23620297 supply of , gasket discharge pipe flange to c.rly. drg. no. ci/cr 84 alt.4 [self life 2 years]...
23475019 supply of flange cover for discharge pipe, flange cover for discharge pipe flange of btpn wagon to rdso drg. no.wd.86081/s 65 alt.13, item 11....
23121719 supply of flange a20 for 20 nb pipe, flange a20 for 20 nb pipe as per drg.no. cc36674 & mdst: 110 rev: 01, packing instruction pi100....
22978423 supply of h.p. pipe flange for elgi make compress, h.p. pipe flange for elgi make compressor model no rr80101 as per elgi part no 000448540....
22970349 supply of flange welded joint dia 25mm bore pipe to pipe, flange welded joint dia 25mm bore pipe to pipe drg. no. icf/sk/3 5 232 col1 mat. stainless steel to is: 6911 1992xo4cr19 ni 9304 si...
22970042 supply of flange welded joint dia 20mm bore pipe to pipe, flange welded joint dia 20mm bore pipe to pipe equipment swivel type drg. no. icf/sk 3 5 233 col ii & iv mat. stainless steel to is 6911 1992x04 cr.19 ni 9304 si...
22888009 supply of flange a20 for 20 nb pipe, flange a20 for 20 nb pipe as per drg.no. cc36674 & mdst: 110 rev: 01, packing instruction pi100....
22822074 auction sale of lot no: 1 lot name: misc ms scrap like pipes, flanges, angles, plates, display boards...
22425390 auction sale of lot no: 1 lot name: misc ms scrap like pipes, flanges, angles, plates, display boards...
22230374 supply of set of silicon rubber gasket., set of silicon rubber gasket o ring suitable for tfp oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,k,l & m as per abb idno.3ehn424150 for wag 9 as per sketch no.els/aq/wag 9/sk.no.0033/rev 0....
22176263 supply of flange a20 for 20 nb pipe, flange a20 for 20 nb pipe as per cc36674 & mdst: 110 rev: 01 , packing instruction pi100....
21956078 supply of set of silicon rubber gasket., set of silicon rubber gasket o ring suitablet e for tfp oil cooling pipes (metallic pipes) flange type a,b,c,d,f,g,k,l & m as per abb idno.3ehn424150 for wag 9 as per sketch no.els/aq/wag 9/sk.no.0033/rev 0....
21596007 supply of flange a20 for 20 nb pipe, flange a20 for 20 nb pipe as per cc36674 & mdst: 110 rev: 01 , packing instruction pi100....
21144472 supply of gasket top header to pipe flange ems 629 drg.no 9572322 alt aitem list : ( 1 ) gasket top header to pipe flange ems 629 drg.no 9572322 alt a...
19975545 tender for hexagonal bolt for fastening flexinble pipe flange with apm size 3/8 16g(31mm) long as per drg. drg.item list : (1) hexagonal bolt for fastening flexinble pipe flange with apm size 3/8 16g(31mm) long as per drg. drg. no. jhs/sk 2938...