40766912 transportation of compressed natural gas ( cng ) through light / medium commercial vehicles ( lcv / mcvs ) in cng filled mobile cascades” for geographical areas ( gas ) awaraded to iocl in 9th, 10th & 11th round of cgd bidding .group a bihar, jharkhand & west bengalgroup c madhya pradesh, punjab, rajasthan & maharashtra...
40766902 transportation of compressed natural gas ( cng ) through light / medium commercial vehicles ( lcv / mcvs ) in cng filled mobile cascades” for geographical areas ( gas ) awaraded to iocl in 9th, 10th & 11th round of cgd bidding .group a bihar, jharkhand & west bengalgroup c madhya pradesh, punjab, rajasthan & maharashtra...
40277168 procurement of for steel wire reinforced rubber hoses for natural gas for use at pressure up to 100 mbar (g) procurement of for steel wire reinforced rubber hoses for natural gas for use at pressure up to 100 mbar (g) ernakulam, allahabad, panipat, chandigarh , daman, udham singh nagar, dharwad, south goa, bulandshahr, aligarh hathras, jaunpur, allahabad ou , steel wire reinforced rubber hoses for natural gas for use at pressure up to 100 mbar (g) including supply, transportation, insurance, loading, unloading at different ioagpl stores/sites....
40074146 repair work of natural gas crematorium at harishchand ghat under alok department, municipal corporation varanasi....
39983471 bids are invited for domestic meters and related services for cgd project 6000 nos at dehradun as per mr item a.2.2.2.2 , services for smart metering and managing metering data and comprehensive maintenance for quantity 6001 upto 10000 nos at dehradun as per mr item a.2.2.2.3 , services for smart metering and managing metering data and comprehensive maintenance for quantity 01 no upto 3000 nos at meerut as per mr item a.2.2.3.1 , services for smart metering and managing metering data and comprehensive maintenance for quantity 3001 nos upto 6000 nos at meerut as per mr item a.2.2.3.2 , services for smart metering and managing metering data and comprehensive maintenance for quantity 6001 upto 10000 nos at meerut as per mr item a.2.2.3.3 , services for smart metering and managing metering data and comprehensive maintenance for quantity 01 no upto 1500 nos at giridih dhanbad as per mr item a.2.2.4.1 , services for smart metering and managing metering data and comprehensive maintenance for quantity 1501 nos upto 3000 nos at giridih dhanbad as per mr item a.2.2.4.2 , services for smart metering and managing metering data and comprehensive maintenance for quantity 3001 upto 5000 nos at giridih dhanbad as per mr item a.2.2.4.3 procurement of natural gas smart prepaid total quantity : 120240...
39892980 hiring of project management consultancy ( pmc ) services for gurdaspur – jammu natural gas pipeline project...
39714235 tender for empanelment of agencies to independently carry out auctions through electronic platform for the price discovery of natural gas produced in india...
39616334 supply and installation testing and commissioning of 25 kva natural gas power genrator system for regional office upsida at sez moradabad....
39539951 tender for supply and installation testing and commissioning of 25 kva natural gas power generator system for regional office of upsida at sez moradabad: tender for supply and installation of led signage board at tds | city, ghaziabad...
39499666 procurement of 1200 scmh gas engine driven cng compressors 1 year arc , gas engine driven 1200 scmh cng compressors and its associated auxiliaries (supply) (item no 1.1 of mr) , design, engineering, manufacturing, string test, supply including packaging and forwarding, insurance, loading and unloading of skid mounted gas engine driven reciprocating compressor package with discharge flow capacity of 1200 scmh at the specified conditions (as per technical specification and scope of work) with explosion proof electric & control panel complete withpower, control cable & 5 nos. of esds having suction pressure of 16 kg/cm2(g), inlet line pressure range of 14 – 49 kg/cm2(g) (performance range 14 to 19 kg/cm2(g) with discharge pressure 255 kg/cm2(g) with 9 bank priority panel along with all special tools and tackles required for erection and commissioning along with co2 flooding system etc. the package shall be inclusive of: a) string test of complete compressor package along with gas engine and accessories at packager’s factory including tpia (third party inspection agency)charges. b) design, engineering, manufacturing, supply including packaging and forwarding, insurance, custom clearance, handling, loading and unloading of air compressor of 7.5kw capacity (approx) discharge pressure approx 16 kg/cm2g, 1000 water liter capacity air receiver for instrumentation air, air dryer along with all accessories and auxiliaries. location(s) for delivery will be finalized at the time of release order (s). , freight upto store/site at varanasi, bhubaneswar, cuttack, patna, ranchi, jamshedpur ga. location(s) for delivery will be finalized at the time of release order (s). (item no 1.2 of mr) , re transportation of packages if delivered at store to respective site including loading & unloading within the same ga (item no 1.3 of mr) , lcv trailer panels (item no 1.4 of mr) lcv trailer panel complete with mass flow meter (with internal local display) based on coriolis principle of micro motion, usa (model cng 50 with 2700 transmitter, cabling, suitable for hazardous area classification. panel shall be weather proof. sheet metal work shall be ss 304. lcv trailer panel shall be mounted / installed near lcv stand. purchaser shall arrange ss316 tubing from compressor to trailer panel and from trailer panel to lcv filling point with hose and fittings. hose & fittings shall be in bidder’s scope. hose shall be 5 feet in length along with breakaway coupling & fitting (quick connector coupler & stem) should have provision of nrv. dispatch of lcv panels shall be as intimated during dispatch clearance. , installation, commissioning, testing (item no 2.0 of mr) , installation, commissioning & field performance test of compressor package including all accessories/ equipment(s) i.e. air compressor, co2 flooding system etc. system at site. (item no 2.1 of mr) , totalamount for supply,installation,testing & commissioning (inclusive of taxes) based on quoted price , services for operations & comprehensive maintenance(item no 3.0 of mr) , items for operations (item no 3.1 of mr) , operation charges for 1st year i.e. during warranty period per shift of 8hrs (4 packages x 3 shifts x 365 days) (item no 3.1.1 of mr) the quoted rate (for 1 no of shift) for this item must be equal to or more than 0.0070% of unit price of mr item no. 1.1 quoted by the bidder. , operation charges for 2nd year i.e. during warranty period per shift of 8hrs (4 packages x 3 shifts x 365 days) (item no 3.1.2 of mr) the quoted rate (for 1 no of shift) for this item must be equal to or more than 0.0074% of unit price of mr item no. 1.1 quoted by the bidder. , operation charges for 3rd year i.e. during warranty period per shift of 8hrs (4 packages x 3 shifts x 365 days) (item no 3.1.3 of mr) the quoted rate (for 1 no of shift) for this item must be equal to or more than 0.0077% of unit price of mr item no. 1.1 quoted by the bidder. , operation charges for 4th year i.e. during warranty period per shift of 8hrs (4 packages x 3 shifts x 365 days) (item no 3.1.4 of mr) the quoted rate (for 1 no of shift) for this item must be equal to or more than 0.0081% of unit price of mr item no. 1.1 quoted by the bidder. , operation charges for 5th year i.e. during warranty period per shift of 8hrs (4 packages x 3 shifts x 365 days) (item no 3.1.5 of mr) the quoted rate (for 1 no of shift) for this item must be equal to or more than 0.0085% of unit price of mr item no. 1.1 quoted by the bidder. , totalamount for operations (inclusive of taxes) based on quoted price , totalamount for operations (inclusive of taxes) based on npv calculation , items for comprehensive maintenance (item no 3.2 of mr) , lump sum repair & comprehensive maintenance charges (excluding the scope covers under warrantee) per compressor package including air compressor for 1st year during warrantee period in all geographical areas of gail inclusive of all manpower, spare parts, lubricants and consumables etc. (4 packages x 12 months) (item no 3.2.1 of mr) the quoted rate (for 1 machine month) for this item must be equal to or more than 0.40% of unit price of mr item no. 1.1 quoted by the bidder. , lump sum repair & comprehensive maintenance charges (including major overhaul) per compressor package including air compressor in all geographical area’s under gail periphery inclusive of all manpower, spare parts, lubricants and consumables etc. for the below mentioned years (item no 3.2.2 of mr) (4 packages x 12 months) , for 2nd year(item no 3.2.2.1 of mr) the quoted rate (for 1 machine month) for this item must be equal to or more than 0.50% (maxmimum 1.5%) of unit price of mr item no. 1.1 quoted by the bidder. , for 3rd year(item no 3.2.2.2 of mr) the quoted rate (for 1 machine month) for this item must be equal to or more than 0.55% (maxmimum 1.5%) of unit price of mr item no. 1.1 quoted by the bidder. , for 4th year(item no 3.2.2.3 of mr) the quoted rate (for 1 machine month) for this item must be equal to or more than 0.61% (maxmimum 1.5%) of unit price of mr item no. 1.1 quoted by the bidder. , for 5th year(item no 3.2.2.4 of mr) the quoted rate (for 1 machine month) for this item must be equal to or more than 0.67% (maxmimum 1.5%) of unit price of mr item no. 1.1 quoted by the bidder. , totalamount for comprehensive maintenance (inclusive of taxes) based on quoted price , totalamount for comprehensive maintenance (inclusive of taxes) based on npv calculation , a. package gas loss: , the bidder shall design the compressor package so that no venting and leakage of gas takes place. bidder shall indicate actual vent & leakage losses through the compressor package. if package loss is quoted more than 1% of suction capacity gas consumption than bid shall be rejected. this quoted figure will be used for evaluation and total quoted price for all compressors towards supply, special tools and tackles, transportation, erection & commissioning, operations and comprehensive maintenance will be calculated as per following formulas: f = g * h * i * n * w where, f= amount in rs. g = vent/leakage rate quoted in percentage h = cost of natural gas per kg @ rs. 48/ per kg i = avg. no. of running hours per year i.e. @ 3650 hours n = number of machines w = 903 kg for 1200 scmh under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , package gas loss for 1st year under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , package gas loss for 2nd year under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , package gas loss for 3rd year under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , package gas loss for 4th year under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , package gas loss for 5th year under coloumn m, bidder to quote g = vent/leakage rate in percentage (without affixing % symbol) , total value of gas loss based on npv calculation , b. engine fuel consumption: , the compressor package shall be designed in such a way that gas consumption of engine (kg/hr) should be minimum for production of cng. bidder shall indicate actual gas consumption for their compressor package. this quoted figure will be used for evaluation and total quoted price for all compressors towards supply, special tools & tackles, erection and commissioning will be calculated as per following formulas: f = g x h x i x n where, f = amount in rs. g = bidder’s gas consumption rate quoted in kg/hr for every 1200scmh (903 kg) of cng produced h = cost of natural gas per kg @ rs. 48/ per kg i = avg. no. of running hours per year i.e. @ 3650 hours n = number of machines notes: 1. fuel consumption quoted by the bidder under guaranteed parameters shall lie within the range of 30 to 33 kg/hr for 1200 scmh. no benefit will be given below 30 kg/hr for 1200 scmh. in case the fuel consumption quoted by the bidder exceeds the upper limit i.e. 33 kg/hr for 1200 scmh the bid will be rejected. 2) the amount (f) as per the above calculations for 5 years shall be considered on npv basis with discount factor @10% p.a. under coloumn m, bidder to quote bidder’s gas consumption rate in kg/hr for every 1200scmh (903 kg) of cng produced , engine fuel consumption for 1st year , engine fuel consumption for 2nd year , engine fuel consumption for 3rd year , engine fuel consumption for 4th year , engine fuel consumption for 5th year , total iv. value of engine gas consumption based on npv calculation , note : 1. inspection shall be carried out by owner or its authorized consultant/ tpi at owner’s cost. 2.inlet piping shall be of class 300# (filter, inlet valve and 3 way valve). 3. delivery location of the compressors may change as per requirement and the same shall be intimated to the supplier before dispatch. 4.maximum limit to quote charges for repair & comprehensive maintenance for 1 machine monthsshall be 1.5% of unit ex works price of sr. no. 2, failing which will be liable for rejection of bid. 5. for sor sr. no. 11 , bidder to ensure the minimum wages of semi skilled labour/worker for construction industries per day (in rupees) of respective state/ central (whichever is higher). 6. deployment of bidder personal/resources for operation will be as per the direction of engineer in charge/gail representative/ga in charge with prior information of minimum one month. in case of installation of 2 nos compressors at a particular cng station/mother station i.e. in same premises, eic may ask the supplier/bidder to deploy one personnel for operations of both compressors and payment will be done for one personnel/resource only. , totalamount for supply,installation,testing & commissioning,operations &comprehensive maintenance (inclusive of taxes) based on quoted price (without npv calculation) note: the evaluated price as per tender condition i.e. , based on npv calculations for cost heads (wherever applicable, as per tender) is given at row below (slno 57)...
39166770 tender for empanelment of agencies to independently carry out auctions through electronic platform for the price discovery of natural gas produced in india...
39166751 notice inviting offers for empanelment of agencies to independently carry out auctions through electronic platform for the price discovery of natural gas produced in india...
39055927 bids are invited for commercial 2 years arc supply of domestic natural gas meters type g 1.6 flow rate 2.5 cubic meter per hr actual for domestic consumers item a of mr , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. a , supply of commercial gas meters type g 4 flow rate 6 cubic meter per hr actual item b.1 of mr , supply of commercial gas meters type g 6 flow rate 10 cubic meter per hr actual item b.2 of mr , supply of commercial gas meters type g 10 flow rate 16 cubic meter per hr actual item b.3 of mr , supply of commercial gas meters type g 16 flow rate 25 cubic meter per hr actual item b.4 of mr , supply of commercial gas meters type g 25 flow rate 40 cubic meter per hr actual item b.5 of mr , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. b.1 , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. b.2 , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. b.3 , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. b.4 , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. b.5 procurement of natural gas meters domestic and total quantity : 121240...
38897598 bids are invited for maintenance and pigging service for oil and gas pipelines piped natural gas; as per scope; as per total quantity :...
38653001 transportation of compressed natural gas ( cng ) through light / medium commercial vehicles ( lcv / mcvs ) in cng filled mobile cascades” for geographical areas ( gas ) awaraded to iocl in 9th, 10th & 11th round of cgd bidding .group a bihar, jharkhand & west bengalgroup b telangana, tamil, nadu & andhra pradeshgroup c madhya pradesh, punjab, rajasthan & maharashtra...
38644896 annual rate contract for supply of remotely operated gas actuated ball valves , supply of remotely operated gas actuated ball valves , 8in nb ball valve flanged ball valves design spec : ansi b16.5 design spec, end flanges : asme b16.5size : 8 bore : full bore pressure designation : class 300 mat, body : astm a216 grade wcb , 4in nb bw ball valve flanged ball valves design spec : ansi b16.5 design spec, end flanges : asme b16.5size : 4 bore : full bore pressure designation : class 300 mat, body : astm a216 grade wcb , natural gas operated actuator for 8in ball valves , natural gas operated actuator for 4in ball valves , installation and commissioning of 8in actuator , installation and commissioning of 4in actuator...
38611896 tender for repair work of natural gas crematorium at harishchand ghat under alok department, municipal corporation varanasi...
38608541 tender for repair work of natural gas crematorium building....
38576982 bids are invited for maintenance and pigging service for oil and gas pipelines piped natural gas; as per scope; as per scope...
38418420 upgradation of main lt network compatible to newly operational 25 kva 3 phase natural gas generator set with associated work at administrative building at tds. city, ghaziabad....
38276547 upgradation of main lt network compatible to newly operational 25 kva 3 phase natural gas generator set with associated work at admin. office at tds. city. ghaziabad....
37913342 upgradation of main lt network compatible to newly operational 25 kva 3 phase natural gas generator set with associated work at admin. office at tds. city ghaziabad...
36929039 bids are invited for procurement of domestic meters mse item a.1 as per mr domestic natural gas meters type g 1.6 left side inlet and right side outlet , item a.2 as per mr domestic natural gas meters type g 1.6 right side inlet and left side outlet , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. a.1 , inland transportation upto delivery location and other costs incidental to delivery of goods for item no. a.2 total quantity : 130000...
36637773 event management arrangement for visit of standing committee on petroleum and natural gas at bpcl, crdc, greater noida....
36481004 tender for amrc for pipeline work for construction / maintenance activities for repair / modification / upgradation for gail gas ( o&m ) in ttz region for a period of 2 years. 2 emergency response team 3 for steel pipe line 4 emergency mobilization of fabrication team with all required / necessary equipments / tools tackles etc. alongwith availability of required ndt team with required consumable for attending the emergency of gas leak / burst / damage to steel pipe line ( upto size 10 ) in firozabad ( the scope includes all emergency related works, trenching as required, execution of work which may include replacement of pipe piece / installation of leak repair clamp / welding if reqd / ndt if required / coating if required and thereafter back filling / restoration of site as reqd ) . the pipe, pipe fittings & leak reapir clamp are free issue materials. all otehr materials $ consumables are in the scope of contractor. welding if required will be paid separately as per sor items. the readiness & availability with qualified team with all resources to be ensured as early as possible or within 06 hrs after intimation from eic. this sor is to be based on incident basis. 5 for mdpe pipeline 6 emergency mobilisation of team comprising adequate skilled & unskilled manpower and machinery, tools & tackles, etc. as applicable for providing services for jointing of underground mdpe pipeline size 20 125 mm dia. in case of any damage resulting in gas leakage including excavation, squeezing the pipeline, cutting, preparing and fusion welding the fittings, leak test, backfilling and complete restoration of site to its original condition in all respect. the work includes deployment of machineries like jcb, de watering pump, fusion welding machine, etc. in all type of surface such as normal soft surface, hard surface, rcc pavement, etc. the contractor shall also ensure barricading of site, public handling, etc. the supply of all materials ( except mdpe pipe fittings ) shall be in the scope of contractor. mdpe pipes & mdpe fittings will be supplied by gail gas. the readiness and availability of team with all resources to be ensured as early as possible or within 04 hrs. after intimation from eic. this sor item is based on per incident basis. 7 pipeline laying / installation ( carbon steel pipes ) 8 receiving and taking over as defined in the specifications, handling, loading, transportation and unloading of owner supplied 3 layer pe coated line pipes alongwith associated fittings and valves from owners designated stock yard ( in agra city gate station / fzd cgs / bharatpur stores / kosi stores as mentioned in scope of work ) to contractors stock yard / workshop / work site including preliminary activities, preparation of drawings, wherever required for crossing etc. including handling, stacking, stringing on the pipe line right of use / pipeline route alignment, carrying out inspection of company supplied materials including line pipes at the time of taking over, laying / installation of coated line pipes, associated fittings and accessories ( including elbows / bends / valves / ij / flanges / reducers / tees, etc. the supply part is separate ) , including execution of all works, taking over, handling, including loading and unloading, arrangement of all additional lands required for contractors storage, fabrication, access for construction, procurement and supply of all materials ( except owner supplied materials ) , consumables ( such as gaskets of required size / nut bolts / studs / flanges if required etc ) , equipment, labour and other inputs, carrying out all temporary, ancillary, auxiliary works, ready for commissioning of pipeline as per drawings, specifications, other provisions of contract document and instructions of engineer in charge, including but not limited to carrying out the following works. however, the above ground pipe line laying / installation / erection works may be considered through mechanical works, if additional.checking, cleaning, aligning, bending, cutting and bevelling ( as required ) of pipes for welding and field adjustments including pipe fittings, welding, carrying out ndt of welds as required including 100% radiography by x ray / gamma ray as per specification in piping of all types ( sizes / thickness / schedule ) by an approved vendor with all relevent competent supporting documents ( interpretation of ndt by owners appointed / approved third party ) and providing all requisite equipment, labour, supervision, materials, films, consumables, all facilities and personnel to process, develop, examine and interpret radiographs and other tests as required, carrying out repairs of weld joints found defective, carrying out re radiography and other tests as required on repaired joints etc. as mentioned in special condition of contract ( scc ) & particular job specification. line pipe laying & installation with radiography by x ray / gamma ray. installation of carrier line pipe at all crossings viz road, cartrack, pathway, drain, nallah & minor water crossings etc. at designated depth by open cut ( including laying of casing pipe ) ( except at hdd / moling / boring cased crossings which is covered separately elsewhere in this sor ) .protective coating including supply of coating & other materials duly approved by owner for all piping valves, fittings, structural steels etc. for buried installation and inside the valve pit. 9 carrying out air cleaning, pigging, flushing, cleaning and hydrostatic testing of complete pipeline with required quantity of corrosion inhibitor including pre testing of designated sections complete as per specification and approved by engineer in charge to specified pressures indicated elsewhere and duration after stabilization as per specification, providing all equipment, pumps, fittings, instruments, ( if required dead weight tester, pressure recorder, thermocouples etc. also ) and services, supervision, labour, consumables, water including supply of corrosion inhibitor, air, etc. as required, locating of leaks and rectification of defect attributable to contractor ( rectification of defects in linepipe material not attributable to contractor shall be paid separately as per other item of schedule of rate ) , re testing after rectification, dewatering after successful completion of hydrotesting of entire section and as approved by engineer in charge. complete commissioning of the laid pipe line after filling nitrogen ( inert atmosphere ) and as per standard procedures approved by the third party / consultant / authorized representative of gail gas as per instruction of eic. all the site requirement or consumables are included in the scope of contractor and the decision of eic will be final in any case. complete back filling or restoration of the trench loose soil or digged soil ( throughout the pipe line lenth ) to be back filled as normal and final clean up of the area up to the satisfaction of consultant / gail gas / eic and the reports are to be submitted, however if the additional work is invoved in restoration that is to be paid extra if needed. 10 note: the above ground pipe line works for ( any size ) is to be taken care from the mechanical works and payments are be regulaized as per mech works sor. 11 specified size ( nb ) 12 50 mm ( 2 ) , cs, ( equal / less pipe dia ) 13 100 mm ( 4 ) , cs, ( equal / less pipe dia / including above 2 to 4 ) 14 150 mm / 200mm / 250mm ( 6 / 8 / 10 ) cs 15 sleeve welding 16 longitudinal butt welding and circumferencial lap welding of sleeve / clamp of any size / thk ( dia up to 10 ) on the carrier pipe line ( charged gas pipe line ) 17 installation of full encirclement of split sleeve by welding on natural gas charged pipe line ( up to dia 10” ) with proper procedures & safety. this all will include the shifting / transporting of sleeve from desisnated gail gas stores to the site, excavation on site as per requirement, peeling off / removal of coating from the pipe line, carrying out the described jobs, all type of ndt / tests, as per requirements & instruction of eic, coating of the sleeve and back filling & clearing of the site by a qualified team ( welder / fitter / etc ) as per other site coordination, if required is in the scope of contractor. the complete responsibility of complete works lie with the contractor, including any liasioning required during the work execution. contractor has to manage all sorts of compensation / insurance policy, as required. 18 supply of fittings 19 bends ( r=3d ) 4 nb, 7.1mm angle 46 to 90 degree 20 bends ( r=3d ) 4 nb, 7.1mm w.t. angle upto 45 degree 21 bends ( r=3d ) 8 nb, 7.1 mm w.t., angle 46 to 90 deg ( or dia 6 ) or sch 80 22 bends ( r=3d ) 8 nb, 7.1 mm w.t., angle upto 45 deg ( or dia 6 ) or sch 80 23 elbow 90 deg 2 thk 6.4 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including below 2. 24 elbow 45 deg 2 thk 6.4 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including below 2. 25 elbow 90 deg 4 thk 7.1 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including above 2 to 4. 26 elbow 45 deg 4 thk 7.1 mm ( a234, gr. wpb, b 16.9, 1.5 d ) including above 2 to 4. 27 equal tee 4x4x4 thickness ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached. ) or as per site requirement 28 equal tee 2x2x2 thickness ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 29 unequal tee 8x4 thickness 7.1 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 30 unequal tee 4x2 thickness 6.4 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 31 unequal tee3x2 thickness 6.4 mm ( a234, gr. wpb, asme 16.9 ) or mss sp75 gr wphy 42 or equivalent ( tech data attached ) or as per site requirement 32 reducer 4x3 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 33 reducer 3x2 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 34 reducer 4x2 ( a234, gr. wpb, b 16.9 ) thickness 6.4 mm 35 reducer 2x1 1 / 2 or 1 ( a234, gr.wpb, b 16.9 ) thickness 6.4 mm 36 end cap ( a234, gr.wpb, b 16.9 ) 2 thickness 6.4 mm 37 end cap ( a234, gr.wpb, b 16.9 ) 1 to 1 1 / 12 thickness 6.4 mm 38 end cap ( a234, gr.wpb, b 16.9 ) from dia 3 or 4 thickness 6.4 mm 39 end cap 8 ( a234, gr.wpb, b 16.9 ) 40 insulation joint dia 2x 300# ( sch 80 ) api 5l gr b 41 insulation joint dia 4x 300# ( sch 80 ) api 5l gr b 42 note : materials for fittings / end caps / elbows has to be as per complaince of pngrb specification & standards. supply part excludes the laying and installation with main pipe line works for which additional payment to be made. 43 supply of butt weld ball valves 44 2 # 300, bw, cs, full bore valve 45 4 # 300, bw, cs, full bore valve 46 8 # 300, bw, cs, full bore valve 47 note : ball valve, carbon steel, butt welded, full bore for natural gas pipeline service ( astm a105 & as per technical specification approved and to be procured from approved vendors of gail / gail gas / mecon / eil / pdil / equivalent ) ) 48 note : the installation of fitting / valves / ij / surge diverter / etc is to be considered as normal working of pipe line laying works and the payments for the works is to be done on the basis of normal items of excavation / welding / ndt / coating / etc as per sor covered in the contract. 49 installation of carrier pipe crossings by hdd method at crossing without casing pipe 50 complete work of installation of carrier pipe at crossings ( between the limits as defined in approved drawings ) by hdd method for road, nallah, drain and canal wherever required in all types of soils and terrains including receiving and taking over owner supplied three layer pe coated line pipes from owners designated place of issue / dump site ( s ) and transportation to contractors stock yard / work shop / work site including all handling, loading, unloading, aligning etc. supply of all contractor supplied material including manpower, equipment, consumables, other resources and aquiring the required land for storage, fabrication inclduing string preparation of pipes, welding, welding repair, radiography, coating of field joints with special type heat shrink sleeve and repair of pipeline coating with special repair patch materials as per specification, strapping of cs conduit with main pipeline subducted with hdpe conduit for laying / blowing of ofc cable, pre testing etc. of complete string made, etc. and execution of, but not limited to, following works in accordance with specifications and instruction of engineer in charge and as per all provision of contract document. 51 note:the length mentioned in sor is indicative for all the crossing to be done by hdd & locations shall be decided by gail gas / consultant prior to start of job depending upon site condition. payment for the length of final tied in carrier pipeline string with mainline laid by hdd are inclusive in this above item rate. no any separate payment shall be made under other clauses mentioned elsewhere. 52 installation of 2 nb coated carbon steel pipe 53 installation of 4 nb coated carbon steel pipe 54 installation of 10 / 8 / 6nb coated carbon steel pipe 55 crossing ( uncased ) 56 installation of casing pipe by jacking / boring / moling for road, rail, nalah, drain etc. crossings wherever required in all types of soils and terrains, including all associated works like supply of all other contractor supplied materials viz. casing insulators and casing end seals, materials for casing vents and drain etc. including supply of all other materials, equipment, consumables, manpower, welding including visual inspection of all weld joints, installation of casing insulators end seals, vent and drain off pipes, backfilling and restoration as original of the facility crossed and performing all works as per drawings, specifications and instructions of engineer in charge and provisions of contract document. 57 note: the length mentioned in sor is indicative for all the crossing to be done by jacking / boring numbers & locations shall be decided by gail gas / consultant prior to start of job depending upon site condition. width of the above crossing mentioned is tentative. actual length & cover from top of casing pipe string may vary depending upon site conditions, crossing methods, approved drawings etc. and / or decided by concerned authority / engineer in charge. the length mentioned in sor is indicative for all the crossing & locations shall be decided by engineer in charge depending upon site condition. payment for the length of final tied in carrier pipeline string with mainline laid by jacking / boring method & moling are inclusive in this above item rate. no any separate payment shall be made under other clauses mentioned elsewhere. 58 installation of 2 nb coated carbon steel pipeline without casing 59 installation of 4 nb pe coated carbon steel pipeline without casing 60 installation of 6 / 8 / 10 nb pe coated carbon steel pipeline without casing 61 repair of coating defects ( not attributable to contractor ) 62 coating on pipe lines ( repair / bare pipe line / fitting additional ( not attributed to contractor ) 63 apply of all coating materials including supply as per heat shrink sleeve or cold tape application methedology with specification to be compatible with pipe coating material, supply of all consumables, utilities, equipments and all manpower required, pipe cleaning and surface preparation by sand blasting, repairing of coating defects ( resulting in holiday ) for line pipes, performing all works necessary for the completion of the works stirctly in accordance with relevant specification and instructions of engineer in charge. this rate shall be applicable per running meter of the exposed steel area. 64 for pipeline size 2 nb 65 for pipeline size 4 nb 66 for pipeline size 10 / 8 / 6 nb 67 hot tap works ( excluding split tee / weldolet / ball valve ) 68 complete work for providing hot tap off, excavation for required depth & back filling / restoration to original condition including installation of valves & flanges, etc. on underground pipeline, arranging all manpower, machineries, tools & tackles, consumables ( such as flanges / blinds of required size / gaskets / studs, nut bolts / etc and coating on fitiings if required ) . 69 hot tapping machine for making hot tap also to be provided by the contractor with all safety precautions, as per standard norms / practice & instruction of engineer in charge. 70 2 hot tapping on 4 / 6 / 8 / 10 natural gas pipeline 71 4 hot tapping on 4 / 6 natural gas pipeline 72 4 hot tapping on 8 / 10 natural gas pipeline 73 hot tapping fittings supply ( split tee ) 74 supply & installation of split tee of the required / specified specification suitable for api 5l gr.x 46, 6.4 mm / available thichness header pipe line. ( complete with backing bars and run off plates ) or suitable for hydro carbon services for cgd networks as per pngrb guidelines. 75 4x 2 spilt tee class 300# rf 76 8x4 spilt tee class 300# rf 77 8x 2spilt tee class 300 # rf 78 hook up with existing pipeline after shut down of operating pipeline 79 complete work for providing tap off on underground / aboveground pipeline including supply of all associated required fittings, flanges, consumables, excluding valves ( which are covered separately ) , arranging all manpower, machineries, tools & tackles, consumables ( coating on the welded portion or opened cleaned buffed portion for shut down including supply of coating materials ) , excavation for the pipe line trenching up to the required depth & sizes and restoration to original condition after works completion and ndt also for hook up with existing pipeline with all precautions, as per standard norms / practice & instruction of engineer in charge. instead of hook up with existing pipeline the work may involve removing existing leak repair clamp by cutting damaged pipe piece out & replacement with welding of 1 m ( approx. ) cs pipe including hydrotesting & transportation of the cs pipe piece from gail gas stores at firozabad kosi & cutting, beveling, ndt, etc. note: above work may involve inertization & purging of the pipeline section with nitrogen prior to start of welding work and payment will be made separately as per respective sor item. wherever applicable dismantling of existing structures such as rcc drain, etc is to be done without stopping the flow of water by making alternative arrangement for water flow till completion of work and reconstruction of the dismantled structure. the rate to include necessary arrangement for maitaining water flow. payment for dismantling and reconstruction will be made separately through respective sor items. 80 2 pipe line to be hooked up to existing pipeline sizes from dia 2 to dia 10 81 4 pipe line to be hooked up to existing pipeline sizes from dia 2 to dia 10 82 6 / 8 / 10 pipe line to be hooked up to existing pipeline sizes from dia 4 to dia 10 83 metering skid 84 erection / installation of metering skid on foundation at the desired location ( skid type upto g 600 metering skid with size up to 4.5 mtr. x 2.5 mtr. / 5.0 mt of weight ) including the labour cost / arrangement of crane or required machinery cost & necessary coordination at site. 85 transportation of metering skid: shifting of metering skid ( type upto g 600 metering skid with size up to 4.5 mtr. x 2.5 mtr. / 5.0 mt of weight ) ) , from firozabad cgs, agra cgs or kosi store yard and erection / installation on foundation in the premises of consumer ( or ) removal from foundation from the consumer premises and shifting to acgs / fcgs / kosi store yard. the item also includes the arrangement for loading / unloading and the necessary labour cost etc. 86 disconnection of existing connectivity: 87 disconnection of existing cs pipeline: excavation of pit suitable for work, disconnection of existing connectvity upto 4 size of cs line during shut down ( to be arranged by owner ) from the main / branch line by cold cutting, capping / plugging by end cap of requisite size ( to be provided by owner ) through welding, its ndt including supply of all manpower, machineries & nitrogen gas for local purging etc. the work shall also include removal of above ground pipe spool, fittings ( size upto 4 ) , tlp etc. from the premises of consumer and its shifting to gail gas designated stores / yard as per instruction of eic. the pipeline piece which can not be recovered shall be dealt as unusable. ( however, the above ground disconnection is to be treated as normal joint. ) 88 miscellaneous mechanical works : 89 welding works: receiving, handling, loading, transportation and unloading of all owner supplied materials from owners designated stock yards to contractors own stock yards / workshops / work sites including, preparation of drawing, welding of pipe spools & associated fittings, supply of all consumables, manpower / machineries, supervision and shifting of welded spools to consumer end as per instructions of engineer in charge. 90 cutting & re beveling: removal of flanges / fittings from existing piping spools by gas cutting / grinding, edge preparation inlcuding supply of all manpower, supervision, consumables etc. 91 radiography ( x ray / gamma ray ) : performance of radiographic inspection on piping of all types, sizes, thickness including providing or hiring of all necessary equipment, tools and tackles though not expressly mentioned but requied to perform the work as per specification and instruction of engineer in charge. radiographs & reports shall be submitted to the engineer in charge. 92 purging with nitrogen for existing u / g pipline system: inertization & purging of the pipeline section with nitrogen for existing underground pipeline network prior to carrying out hotwork during shutdown, including supply of all equipment, man power, consumables ( including nitrogen required for purging / filling ) , materials for all temporary works and performing all associated works, complete as per the relevant specifications, and instructions of engineer in charge. 93 8 pipeline 94 4 pipeline 95 3 pipeline & below 96 steel fabrication & mechanical works 97 fabrication of ms structural / mechanical works of different sizes ( all materials to be isi marked ) including procurement of materials i.e hinges nuts, bolts, washers of all sizes etc. / ms plates / sheets of reqd size as per site requirements / eic, primer, coating / painting etc. and transportation at site, as required ( complete in all respect ) , any specific part / piece / materials may be paid separately, if required however fabrication part remains included. fabrication & fixing of different type of fabricated structures / mechanical covers for valve pits / man holes with its frame, if required and other supports, etc. ( this will include the removal of old / damaged scrap materials from site to the designated place as instructed by eic, if required ) . 98 civil works 99 dismantling of existing rcc work / any civil structure. the purpose of dismantling is to make required space for the welding or other work to be done. 100 rcc work: providing reinforced cement concrete of grade ( 1: 1.5: 3 ) with 20mm and down grade crushed stone aggregate in all types of structures like rcc wall, foundations, pedestals, pedestal bases, pipe supports, etc. at all depths and heights complete as per drawings, specifications and direction of the eic. ( including cost of providing shuttering etc. but excluding supply of reinforcement steel which will be paid separately as per sor item ) . 101 reinforcement steel: supplying, fabricating & fixing in position hysd steel reinforcement / tmt grade fe 415 conforming to is 1786 1985 at all level ( all depth & height ) and positions including the cost of transport, straightening, cutting, bending , cranking, binding, welding, provision of necessary chairs and spacers, as per drawings and specifications and including the cost of binding wire, labour etc. as per scope of work and direction of eic. 102 excavation works: earth work in excavation below ground level for all kinds of works in all types of soil as directed by eic for a depth up to site requirements ( for the purpose meant for taking up any work by owner ) including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, de watering of accumulated water from any source and keeping the surface dry for subsequent works and if required disposal or stacking of excavated material at undisputed place, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, ofc, electric overhead and underground cables etc. all complete. 103 painting on steel structures / skids / aboveground piping: painting of steel structures / skids / aboveground piping after surface preparation which are situated at various locations of city. scope includes removal of dust, grease and loosely adhering paint with wire brush, emery paper and cleaning with linen cloth. primer shall be high solid polyamine cured epoxy one. finish coat should be of epoxy paint of approved brand such as burger / narolac / asian paints. colour as per instruction of eic. 104 restoration 105 restoration of rcc / pcc road / area 106 restoration of damaged rcc / pcc road / area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 107 restoration of bitumin road / area 108 restoration of damaged bitumin road / area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 109 restoration of paver block area 110 restoration of damaged paver block area during execution / construction work by using standard tools, tackles and practices, including all bye works, complete as per existing specifications & directions and satisfaction of of e.i.c / concerned authority ( rates include cost of labour, tools, equipment, hire charges & supply of all materials and consumables ) 111 cathodic protection system 112 all works shall be carried out as per approved drawings & specifications. work shall include design / residual engineering, preparation of cp schematic drawing, supply, installation, testing & commissioning of complete cp system, all related civil work, including providing foundations, supply of all materials as specified in special conditions of contract, instruments, consumables, touch up epoxy paint as required, including supply of paint, tools, tackles, labour, transportation for satisfactory completion of work and as per the direction of engineer in charge. in addition to the items mentioned below the contractors scope shall include connecting the new pipelines to the existing pipelines / cathode points of tr units by means of jumpering / bonding. 113 25mm2 114 10mm2 115 6mm2 116 making cable to pipe connections: by thermit welding for following cables, including excavation for exposing pipe, removal of coating / wrapping, thermit welding, recoating of the area of weld by epoxy filling, holiday testing, backfilling, supply of all tools, tackles, consumables, thermit weld kits & labours for satisfactory completion of work. 117 6mm2 cables 118 10mm2 cables 119 25mm2 cables 120 supply & installation of test station as per drawings and technical specifications. work shall include all related civil works including foundation, termination of cables inside the test stations along with lugs & ferules sealing of cable entry space with bitumen compound, supply of all materials, consumables, tools, tackles etc. for satisfactory completion of work and as per direction of engineer in charge. 121 supply & installation of zinc anode at a depth of 1.5 2.0m on all type of soil alongwith 10m tail cable of 25mm2 high conductivity, tinned, stranded copper conductor, 650 / 1100v grade, xlpe insulated, armoured, pvc sheathed for grounding electrical surges in the pipeline at ht crossings. the work includes excavation, laying of zn anode of minimum 20 kg weight, backfilling and all related civil work, complete in all respects. the work shall also include anode to tail cable connection, cable laying and termination inside the test station. 122 supply & installation of mg anodes after pre packaged with chemical backfill as per drawing. the anodes will have to be buried at a depth of 1.5 to 2m on all types of soil at approved location. the work shall include all earth work, laying of anodes & cables in position and termination of cable inside test stations with lugs, shunt & variable resistors, supply of all tools, tackles, consumables, labours, transportation of materials etc. required for satisfactory completion of work as per direction of engineer in charge. 123 supply, installation, testing and commissioning of polarization cell ( solid state type ) 124 supply, installation, testing and commissioning of spark gap arrestors / surge diverter across insulating joints. 125 supply, installation, testing and commissioning of earth pits in all types of soils including soft rocks, as per specification direction of engineer in charge. 126 supply and installation of gi25x3 mm earth strips including bending, cutting, and jointing with suitable nut, blots and washers for connections with earthpit. 127 mdpe line works 128 disconnection of existing pe pipeline 129 excavation of pit suitable for work, disconnection of existing connection sizes upto 125mm of pe line during shut down ( to be arranged by owner ) from main / branch line by cold cutting / plugging by end cap of requisite size upto 125mm to be ( provided by owner ) through fusion wwelding, its testing including supply of all manpower, machneries & nitrogen gas for local purging etc. the work shall also include removal above ground fitting etc upto 125 mm from the premises of consumer and its shifting to stores as per eic 130 couplers / end cap mdpe ( pe 100 ) , size up to 125mm 131 elbows / bend mdpe ( pe 100 ) size upto 125mm 132 valve mdpe ( pe 100 ) upto 125mm...
36410503 bids are invited for procurement of natural gas domestic meters mse item a.1 as per mr domestic meters type g.1.6 left side inlet , item a.2 as per mr domestic meters type g.1.6 right side inlet , inland transportation for item a.1 , inland transportation for item a.2 total quantity : 130000...
36318772 carrying out study on hazop & risk analysis and preparation of erdmp ( emergency response & disaster management plan ) at lpg bottling plant, loni & compliance of regulations as applicable under latest petroleum and natural gas regulatory board ( codes of practices for emergency response and disaster management plan ) regulations=> limited...
36316777 bids are invited for procurement of natural gas commercial regulators ( 2 years arc ) for cgd project at smdt, bengaluru, 4 gas ( saraikela kharsawan, west singhbhum, mirzapur, chandauli, & sonbhadra, raisen, shajapur & sehore ) & 5 gas ( dakshin kannada ga; dehradun ga; puri, ganjam & nayagarh ga; dhanbad & giridih ga and sundergarh & jharsuguda ga ) ...
36266998 hiring of transit accommodation for the office of directorate general of hydrocarbons, under ministry of petroleum and natural gas, noida, under two bid system...
36169419 e tender for procurement of natural gas commercial meter for amethi, pratapgarh raebareli ga...
36072979 e tender for procurement of natural gas commercial regulators for amethi, pratapgarh raebareli ga...
35990056 rate contract for supply and installation of odorizing systems for cgd projects in iocl gas , supply and installation of odorization unit , supply, installation, erection, testing & commisioning of odorizing unit including first fill of odorizer system (flow capacity of 500 13500 scmh x 1000 litrewater tank capacity)having system designed capacity of odorising system 30000 scmh alongwith all accessories as mentioned in bid document . ga name: i. beed, jalgaon and jalna districts ii. jhunjhunu, sikar and nagaur districts (2 nos.) iii. dharmapuri and krishnagiri districts iv. madurai, theni and virudhnagar districts v. kanyakumari, thoothukudi and tiruneveli kattabo districts vi. east mednipore, west mednipore and jhargram district vii. araria, purnia, katihar and kishanganj districts (kishanganj cgs) viii. khagaria, saharsa and madhepura districts (khagaria cgs) ix. aurangabad, kaimur and rohtas districts (mohania cgs) , supply of suitable odorant absorber (absorbent 10 or equivalent) with necessary handling accessories in suitable storing unit (10 kg unit for each location) inclusive of transportation charges as mentioned in bid document , supply inclusive of transportation charges of a suitable portable odorant concentration measuring device with necessary attachment for measuring concentration of odorant in natural gas at various pipeline locations. the hand held instrument shall be equipped with electro chemical sensor suitable for measuring tbm in natural gas in mg/m3, with range of 0 – 50 mg/m3 and resolution of digital display of 0.1 mg/m3 along with calibration gas, atex approval, and internal storage of minimum 5000 measurement data (one for each location) as mentioned in bid document. , supply & refilling of odorant at delivery site as decided by the owner/eic in main tank all inclusive rate includingtransportation charges, connector / hose, necessary nitrogen blanketig system to avoid leakage of odorant to atmospheres during comprehenshive maintenenace contract as mentioned in bid document. , comprehensive maintenance , comprehenshive maintenance contract as per particular technical specification for complete supplied and installation of system as mentioned in bid document for 1st year ga name: i. beed, jalgaon and jalna districts ii. jhunjhunu, sikar and nagaur districts (2 nos.) iii. dharmapuri and krishnagiri districts iv. madurai, theni and virudhnagar districts v. kanyakumari, thoothukudi and tiruneveli kattabo districts vi. east mednipore, west mednipore and jhargram district vii. araria, purnia, katihar and kishanganj districts (kishanganj cgs) viii. khagaria, saharsa and madhepura districts (khagaria cgs) ix. aurangabad, kaimur and rohtas districts (mohania cgs) , comprehenshive maintenance contract as per particular technical specification for complete supplied and installation of system as mentioned in bid document for 2ndyear ga name: i. beed, jalgaon and jalna districts ii. jhunjhunu, sikar and nagaur districts (2 nos.) iii. dharmapuri and krishnagiri districts iv. madurai, theni and virudhnagar districts v. kanyakumari, thoothukudi and tiruneveli kattabo districts vi. east mednipore, west mednipore and jhargram district vii. araria, purnia, katihar and kishanganj districts (kishanganj cgs) viii. khagaria, saharsa and madhepura districts (khagaria cgs) ix. aurangabad, kaimur and rohtas districts (mohania cgs) , comprehenshive maintenance contract as per particular technical specification for complete supplied and installation of system as mentioned in bid document for 3rdyear ga name: i. beed, jalgaon and jalna districts ii. jhunjhunu, sikar and nagaur districts (2 nos.) iii. dharmapuri and krishnagiri districts iv. madurai, theni and virudhnagar districts v. kanyakumari, thoothukudi and tiruneveli kattabo districts vi. east mednipore, west mednipore and jhargram district vii. araria, purnia, katihar and kishanganj districts (kishanganj cgs) viii. khagaria, saharsa and madhepura districts (khagaria cgs) ix. aurangabad, kaimur and rohtas districts (mohania cgs) , comprehenshive maintenance contract as per particular technical specification for complete supplied and installation of system as mentioned in bid document for 4th year ga name: i. beed, jalgaon and jalna districts ii. jhunjhunu, sikar and nagaur districts (2 nos.) iii. dharmapuri and krishnagiri districts iv. madurai, theni and virudhnagar districts v. kanyakumari, thoothukudi and tiruneveli kattabo districts vi. east mednipore, west mednipore and jhargram district vii. araria, purnia, katihar and kishanganj districts (kishanganj cgs) viii. khagaria, saharsa and madhepura districts (khagaria cgs) ix. aurangabad, kaimur and rohtas districts (mohania cgs)...
35912858 rate contract for supply of commercial meter ((diaphragm type) for cgd projects in iocl gas , design, manufacturing, assembly, inspection, supply , including packaging, transit insurance, handling, transportation, loading / unloading at sites/ designated stores, documentation etc. and providing all related services including assistance in commisioning, conforming to respective technical specification & data sheet enclosed with this tender for supply of natural gas commercial meter. , commercial meter diaphragm type with amr retrofitting provision: , g 4 (upto 6 scmh), at 300mbar pressure , g 6 (upto 10 scmh), at 300mbar pressure , g 10 (upto 16 scmh), at 300mbar pressure , g 16 (upto 25 scmh), at 300mbar pressure , g 25 (upto 40scmh), at 300mbar pressure...
35807567 fabrication of multipass natural gas based membrane reformer...
35782741 supply of fabrication of multipass natural gas based membrane reformer in the deptt. of chemical engg. and tech., iit ( bhu ) varanasi tender for supply of fabrication of multipass natural gas based membrane reformer in the deptt. of chemical engg. and tech., iit ( bhu ) varanasi. , item forsupply , fabrication of multipass natural gas based membrane reformer ( as per technical specification given in annexure 1 ) ...
35471737 bids are invited for and services for smart metering and data management supply of smart natural gas domestic prepaid meters part a1 of material requisition mr , installation, testing, commissioning, interfacing, configuration, etc item a.2.1 of mr , smart metering, managing metering data, comprehensive maintenance services etc upto 3000 no item a.2.2.1 of mr , smart metering, managing metering data, comprehensive maintenance services etc 3001 nos upto 6000 nos item a.2.2.2 of mr , smart metering, managing metering data, comprehensive maintenance services etc 6001 upto 9000 nos item a.2.2.3 of mr , smart metering, managing metering data, comprehensive maintenance services etc 9001 upto 12000 nos item a.2.2.4 of mr procurement of natural gas smart prepaid meters total quantity : 24060...
35358376 for supply of natural gas / rlng for urea use on short term basis for its manufacturing unit located at gorakhpur ( uttar pradesh ) from suppliers located in india...
35237454 tender for supply of fabrication of multipass natural gas based membrane reformer in the deptt. of chemical engg. and tech., iit ( bhu ) varanasi , item forsupply , fabrication of multipass natural gas based membrane reformer ( as per technical specification given in annexure 1 ) ...
34684092 supply of natural gas / rlng for urea use on short term basis for its three manufacturing units located at gorakhpur ( uttar pradesh ) , barauni ( bihar ) and sindri ( jharkhand ) from suppliers located in india...
34001381 procurement of natural gas regulators 2 years arc....
33956176 bids are invited for a.1 as per mr , b.1 as per mr , c.1 as per mr , c.2 as per mr , c.3 as per mr , c.4 as per mr , d.1 as per mr , d.2 as per mr , d.3 as per mr , d.4 as per mr , d.5 as per mr , d.6as per mr , d.7 as per mr , e.1 as per mr , e.2 as per mr ,e.3 as per mr , e.4 as per mr , e.5 as per mrprocurement of natural gas regulators 2 years total quantity : 43940...
33553353 hiring of transit accommodation for the office of directorate general of hydrocarbons, under ministry of petroleum and natural gas, noida, under two bid system...
33260690 bids are invited for supply of odorising system, flow capacity of max 1, 50, 000 scmd (item no. a. 1 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 1 of mr (q3) , suitable odorant absorber (absorbent 10 or equivalent) (item no. a. 2 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 2 of mr (q3) , a suitable portable odorant concentration measuring device (item no. a. 3 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 3 of mr (q3) , on site training of purchaser’ s personnel (item no. a. 4.1 of mr) (q3) , installation, trial run,commissioning, calibration, first filling odorant(item no. a. 4.2 of mr) (q3) , first fill includingsupply of odorant for natural gas (item no. a. 4.3of mr) (q3) , comprehensive maintenance ofodorizing system for 1st year (item no. a. 5.1 of mr)(q3) , comprehensive maintenance of odorizingsystem for 2nd year (item no. a. 5.2 of mr) (q3) ,comprehensive maintenance of odorizing systemfor 3rd year (item no. a. 5.3 of mr) (q3) ,comprehensive maintenance of odorizing systemfor 4th year (item no. a. 5.4 of mr) (q3) total quantity : 4680...
33259783 supply of odorising system, flow capacity of max 1, 50, 000 scmd (item no. a. 1 of mr) ( 6 set ) supply of odorising system, flow capacity of max 1, 50, 000 scmd (item no. a. 1 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 1 of mr (q3) , suitable odorant absorber (absorbent 10 or equivalent) (item no. a. 2 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 2 of mr (q3) , a suitable portable odorant concentration measuring device (item no. a. 3 of mr) (q3) , inland transportation and other costs incidental to delivery for item no. a. 3 of mr (q3) , on site training of purchaser’ s personnel (item no. a. 4.1 of mr) (q3) , installation, trial run, commissioning, calibration, first filling odorant (item no. a. 4.2 of mr) (q3) , first fill including supply of odorant for natural gas (item no. a. 4.3 of mr) (q3) , comprehensive maintenance of odorizing system for 1st year (item no. a. 5.1 of mr) (q3) , comprehensive maintenance of odorizing system for 2nd year (item no. a. 5.2 of mr) (q3) , comprehensive maintenance of odorizing system for 3rd year (item no. a. 5.3 of mr) (q3) , comprehensive maintenance of odorizing system for 4th year (item no. a. 5.4 of mr) (q3)...
33045361 tender for designing & printing of 55th edition of indian petroleum & natural gas statistics (ipng) 2021 22...
32904823 hiring of transit accommodation for the office of directorate general of hydrocarbons, under ministry of petroleum and natural gas, noida, under two bid system...
32474890 rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group a ) rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group a ) , design, manufacturing, assembly, inspection, supply , including packaging, transit insurance, handling, transportation, loading / unloading at sites / designated stores, documentation etc. and providing all related services including assistance in commisioning, conforming to respective technical specification & data sheet enclosed with this tender for supply of natural gas commercial meter. , commercial meter diaphragm type with amr retrofitting provision: , g 4 ( upto 6 scmh ) , at 300mbar pressure , g 6 ( upto 10 scmh ) , at 300mbar pressure , g 10 ( upto 16 scmh ) , at 300mbar pressure , g 16 ( upto 25 scmh ) , at 300mbar pressure , g 25 ( upto 40scmh ) , at 300mbar pressure...
32474887 rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group c ) rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group c ) , design, detailed engineering, manufacturing, assembly, inspection, supply including packaging, transit insurance, handling, transportation, loading / unloading at sites / designated stores, documentation etc. and providing all related services conforming to respective data sheets enclosed with this tender for supply of natural gas commercial regulator. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 300 mbar ( g ) outlet pressure with 6 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 300 mbar ( g ) outlet pressure with 10m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 300 mbar ( g ) outlet pressure with 16 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 300 mbar ( g ) outlet pressure with 25 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 300 mbar ( g ) outlet pressure with 40 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 1.5 bar ( g ) outlet pressure with 25 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 1.5 bar ( g ) outlet pressure with 40 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 1.5 bar ( g ) outlet pressure with 65 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 1.5 bar ( g ) outlet pressure with 100 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification. , pressure reduction of 1 6 kg / cm2 ( g ) inlet to 1.5 bar ( g ) outlet pressure with 250 m3 / hr flow capacity of commercial regulators as per datasheet enclosed with technical specification....
32474885 rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group b ) rate contract for supply of commercial meter and regulator for cgd projects in iocl gas ( group b ) , design, manufacturing, assembly, inspection, supply , including packaging, transit insurance, handling, transportation, loading / unloading at sites / designated stores, documentation etc. and providing all related services including assistance in commisioning, conforming to respective technical specification & data sheet enclosed with this tender for supply of natural gas commercial meter. , commercial meter rpd type: with evc. , g 16 ( upto 25 scmh ) with evc , g 25 ( upto 40 scmh ) with evc , g 40 ( upto 65 scmh ) with evc , g 65 ( upto 100 scmh ) with evc , g 100 ( upto 160 scmh ) with evc , g 160 ( upto 250 scmh ) with evc...
32420269 procurement of odorizing unit and its comprehensive annual maintenance for 3 years along with buyback of old items at sonipat and meerut ga ( s ) procurement of odorizing unit and its comprehensive annual maintenance for 3 years along with buyback of old items at sonipat and meerut ga ( s ) , part a supply & installation , odorising unit, capacity 450000 scmd, 1000 ltr tank ( design, fabrication, testing, supply, installation, first fill of odorant and commissioning of odorizer systems at ggl sonipat site. ) , odorising unit, capacity 300000 scmd, 1000 ltr tank ( design, fabrication, testing, supply, installation, first fill of odorant and commissioning of odorizer systems at ggl meerut site. ) , part b supply , portble odorant concent mtr in ppm, cont ( portable odorant concentration measuring device with necessary attachment for measuring the ppm of odorant in natural gas to check the concentration at various pipeline locations at ggl sonipat site ) . , portble odorant concent mtr in ppm, cont ( portable odorant concentration measuring device with necessary attachment for measuring the ppm of odorant in natural gas to check the concentration at various pipeline locations at ggl meerut site ) . , 75 80 % tbm ( tert butyl mercaptan ) ( supply and first filling of odorant 75 80 % tbm ( tert butyl mercaptan ) + 20 25 % mes ( methyl ethyl sulphide ) , spot leak for ggl sonipat site ) , 75 80 % tbm ( tert butyl mercaptan ) ( supply and first filling of odorant 75 80 % tbm ( tert butyl mercaptan ) + 20 25 % mes ( methyl ethyl sulphide ) , spot leak for ggl meerut site ) , part c services ( comprehensive amc post commissioning ) , sonipat ga , comprehensive annual maintenance charges ( amc ) for 1st year , comprehensive annual maintenance charges ( amc ) for 2nd year , comprehensive annual maintenance charges ( amc ) for 3rd year , meerut ga , comprehensive annual maintenance charges ( amc ) for 1st year , comprehensive annual maintenance charges ( amc ) for 2nd year , comprehensive annual maintenance charges ( amc ) for 3rd year...