Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39916197 different types of work against system strengthening works in municipal area including noida / mau ( aiib ) scheme 2023 24 ( package no. 937, 938 and 939 / ce / si / aiib. / 2023 24 ) in the area of vrindavan under jurisdiction of e.e., eudd vrindavan, lesa, lucknow 1 safe loading, carriage & unloading of following materials from centre store to pit site/j.e. dump store. 2 (a) line material 3 (b) tf 250 kva 4 (c) 11 kv 3x70/3x120/3x185 sqmm xlpe cable 5 (d) abc 3x50/3x120 sq.mm. 6 (e) 11 kv pin insulator with gi pin 7 (f) 11 kv o d cable box 3x120 sqmm xlpe 8 (g) earthing complete for pole 9 (h) lt pvc 3.5x240 sq.mm. 10 (i) lt pvc 1x400 sq.mm. 11 (j) st pole 11 mtr long 12 (k) g.i. wire 8 swg 13 dragging of st pole digging of pit erection of sub station type double pole structure on st pole with fixing of necessary item such as top channel, along with grouting (as per respo norms) dropper channel, 11 pin insulator with pin & 11 kv disc insulator with fitting, do fuse set its ramming, as per respo specification. only pole and insulator will be provided by the department. 14 cable hosting of 11 kv 3x70/3x120/3x185/ sq. mm xlpe cable at the following including jumpering etc complete with help of gi pipe as perrespo norms. gi pipe and other required material shall be supplied by contractor. 15 high pressure testing of 11 kv 3x70/3x120/3x185 xlpe cable along with arrangement of high pressure equipment. 16 well type earthing of with 60 fit deep borring and providing gi pipe 1.5 dia (b class) and earthing must be joint by g.i. strip of 32x5 mm thick long attached with nut & bolts and gi pipe cap. all material and labour shall be supplied the contractor. 17 construction of t/f plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. filling the structure completely per norms with rcc to 1:2:2 cement & stone grit with ms bar and ms channel for resting transformer. all material and labour shall be supplied the contractor. 18 wiremess fencing of 11/0.4 kv s/s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mesh. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e/i. 19 construction ofmasonry/metalic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of bp sheet of 18 swg with locking arrangement, 2 nos. straight ms angle 50x50x6mm (1800 mm olng) 2 nos. 500 amp, 3 nos. 300 amp henely type tailess funse unit, 3 nos coper bus bar of size 1000x50x6 mm and one no. alum busbar 1000x50x6 mm including all civil material required for work. all material shall be supplied by contractor. 20 laying oflt cable 3.5x400 sq mm (double circuit) by drill method as per respo norms. only lt cable supplied by department. 21 cable hosting of ltxlpe cable at the following including jumpering etc complete with help of gi pipe as perrespo norms. gi pipe and other required material shall be supplied by contractor. 22 proper laying & commissioning of (3x50/3x120 sq.mm) xlpe aerial bunched conductor. only abc provided by deptt. 23 fixing and laying of lt pvc cable 1x400 sq.mm as per respo norms only pvc cable provided by department. 24 laying of3x70/3x120/3x185 sq.mm 11 kv xlpe cable by drill method as per respo norms. only 11 kv xlpe cable supplied by department. 25 supply and fixing of copper l piece for 250 kva tf (62x225x12 mm) as per respo norms 26 supply and fixing of copper alluminium lug for 250 kva tf (240/400 sqmm) as per respo norms 27 supply and fixing of 11 kv do fuse set as per respo norms 28 supply and fixing of lt tailless fuse unit 500 amp as per respo norms 29 supply and fixing of gi pipe 6 dia with clamp and nut bolt as per respo norms 30 fabrication, errection & commissioning of 250kvat/f on plinth with all accessories. all material except 250 kva t/f shall be supplied by the contractor. 31 other mislenious material. 32 g.s.t.extra as per rules. ...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39916016 tender for different types of work against system strengthening works in municipal area including noida / mau ( aiib ) scheme 2023 24 ( package no. 936 / ce / si / aiib. / 2023 24 ) in the area of alambagh under jurisdiction of e.e., eudd alambagh, lesa, lucknow 1 safe loading, carriage & unloading of following materials from centre store to pit site / j.e. dump store. 2 ( a ) 250 kva 11 / 0.4 kv tf 3 ( b ) 11 kv xlpe 3x120 sq.mm 4 ( c ) lt abc 3x95+1x70+1x16 sqmm 5 ( d ) st pole 11 mtr. long 6 ( e ) pcc pole 8.5 mtr long 7 ( f ) lt xlpe cable 1x400 sq mm 8 ( g ) lt xlpe cable 3.5x400 sq mm 9 ( h ) 11 kv 3x120 mm outdoor jointing kit 10 ( i ) 11 kv 3x120 mm st jointing kit 11 ( j ) stay wire ( 3.15 mm ) 7 / 10 swg ( gas wire ) 12 dragging of st pole digging of pit erection of sub station type double pole structure on st pole with fixing of necessary item such as top channel, along with grouting ( as per respo norms ) dropper channel, 11 pin insulator with pin & 11 kv disc insulator with fitting, do fuse set its ramming, as per respo specification. only pole and insulator will be provided by the department. 13 dragging of st / pcc pole to pit site, digging of pit erection and grouting ( as per respo norms ) of 11 kv 11 / 8.5 mtr long st / pcc pole with, fixingof necessary item, such as v type x arm, f bracket, 11 kv pin insulator, guarding angle ( 1.8 mm 65x65x6 ) with nut & boltsits ramming as per resspo specification.only pole and insulator will be provided by the department. 14 construction of t / f plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. filling the structure completely per norms with rcc to 1:2:2 cement & stone grit with ms bar and ms channel for resting transformer. all material and labour shall be supplied the contractor. 15 wiremess fencing of 11 / 0.4 kv s / s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mesh. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e / i. 16 well type earthing of with 60 fit deep borring and providing gi pipe 1.5 dia ( b class ) and earthing must be joint by g.i. strip of 32x5 mm thick long attached with nut & bolts and gi pipe cap. all material and labour shall be supplied the contractor. 17 laying of3x120 sq.mm 11 kv xlpe cable by drill method as per respo norms. only 11 kv xlpe cable supplied by department. 18 laying oflt cable 1x400 sq mm by drill method as per respo norms. only lt cable supplied by department. 19 laying oflt cable 3.5x400 sq mm by drill method as per respo norms. only lt cable supplied by department. 20 cable hosting of 11 kv 3x120 sq. mm xlpe cable at the following including jumpering etc complete with help of gi pipe as perrespo norms. gi pipe and other required material shall be supplied by contractor. 21 high pressure testing of 11 kv 3x185 xlpe cable along with arrangement of high pressure equipment. 22 making of heat & shrinkables joints of following sizes and types in 11 kv xlpe cable ( jointing kit will be provided by deptt. ) 23 ( i ) outdoor / indoor end termination jointing kit for 11 kv 3x120 sqmm xlpe cable 24 ( i ) st jointing kit for 11 kv 3x120 sqmm xlpe cable 25 proper laying & commissioning of ( 3x95+1x70+1x16 sq.mm ) xlpe aerial bunched conductor. only abc provided by deptt. 26 supply and fixing of 11 kv fuse set as per respo norms 27 supply and fixing of stay set 16x1800mm as per respo norms 28 supply and fixing of copper l piece for 250 kva tf as per respo norms 29 supply and fixing ofalluminium lug for 250 kva tf as per respo norms 30 fabrication, errection & commissioning of 250kvat / f on dp with all accessories. all material except 250 kva t / f shall be supplied by the contractor. 31 supply and fixing of other mislenious material. 32 g.s.t extra as per rules....

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39915974 different types of work against additional business plan scheme 2023 24 ( package no. 945 / ce / si / add.b.p. / 2023 24 ) in the area of kanpur road under jurisdiction of e.e., eudd kanpur road, lesa, lucknow 1 safe loading, carriage & unloading of following materials from centre store to pit site / j.e. dump store. 2 ( a ) guarding x arm of size 65x65x6mm long ( 5.8kg / m=9.28kg ) 3 ( b ) 2 wire of gi 6swg for lacing ( 6.5m / kg or 154 kg / km ) ( 2x154 ) + 10% 4 ( c ) g.i. wire 5mm 6swg for guarding in intervel of 5 mtr ( 8x25x3.5 ) +10%.6.5m / kg 5 ( d ) st pole 11mtr. long 6 dragging of st / pcc pole to pit site, digging of pit erection and grouting ( as per respo norms ) of 11 kv 11 / 8.5 mtr long st / pcc pole with, fixingof necessary item, such as v type x arm, f bracket, 11 kv pin insulator, guarding angle ( 1.8 mm 65x65x6 ) with nut & boltsits ramming as per resspo specification.only pole and insulator will be provided by the department. 7 lacing of 2 wire of gi 6swg for lacing ( 6.5m / kg or 154 kg / km ) ( 2x154 ) + 10% ( 1300 kg ) 8 laying of g.i. wire 5mm 6swg for guarding in intervel of 5 mtr ( 8x25x3.5 ) +10%.6.5m / kg ( 600 kg ) 9 supply and fixing of guarding x arm holding clamp with nut and bolts includingd / p as per respo normsall material and labour shall be supplied by the contractor. 10 supply and fixing of eye hook as per respo normsall material and labour shall be supplied by the contractor. 11 fixing of guarding x arm & associated hardware with primer and enamel a.i. paint. as per respo norms. all material ( except x arm ) and labour shall be supplied by the contractor. 12 supply and fixing of binding wires for binding of earth wire & g.i. guard as per respo norms. all material and labour shall be supplied by the contractor. 13 other mislenious material. 14 g.s.t.extra as per rules....

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915913 work of replacement and guarding of wires of dilapidated 11 kv line in subdivision bakewar bharthana, chakarnagar and udi under bijne plan year 2023 24 under electricity distribution division ii, etawah. 1 carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd ii etawah under business plan ( 20 cr scheme ) through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 pcc pole 8.5 mtr 3 stp 55 pole 11 mtr long 4 line materials material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required 5 weasel conductor 6 abc ( 3x95+1x70+1x16 ) sqmm 7 grouting of pole 8 installation of stay set complete with grouting and nuzzling etc. 9 earthing of poles by fixing earthing rods and binding with earth wire 10 laying, sagging and stringing and jumpering / bindingofarial bunch conductor in 11 kv / lt lines as per respo manual and as per direction of executive engineer. 11 laying, sagging and stringing and jumpering / bindingofacsr weasel conductor in 11 kv / lt lines as per respo manual and as per direction of executive engineer. 12 installation of 11 kv cross arm holding clamp 13 installation of 33 kv cross arm holding clamp 14 installation of 11 kv v type steel cross arm 15 installation of 33 kv v type steel cross arm 16 installation of 11 kv polymeter pin insulator 17 installation of 33 kv polymeter pin insulator 18 installation of 11 kv polymeter disc insulator 19 installation of 11 kv f clamp for pcc pole 20 installation of 33 kv f clamp for pcc pole 21 installation of 11 kv lt insulator 22 installation of 11 kv lt clamp 23 installation of ms nut bolt...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915869 work of installing 250 kv additional transformer under electricity distribution division ii, etawah under “bijne” plan year 2023 24.= 1 carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd ii etawah under business plan ( 20 cr scheme ) through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 stp 55 pole 11 mtr long 3 line materials material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required 4 lt xlpe cable 1x400 sqmm 5 250 kva transformer 11 / 0.4 kv 6 grouting of pole 7 installation of 11 kv polymeter pin insulator 8 installation of 11 kv polymeter disc insulator 9 installation of ms top channel 10 installation of fuse set 11 installation of ms nut bolt 12 installation of joint connector 150 sqmm lt pvc cable 13 installation of ms dropper channel 14 installation of connecting clamp 15 laying & fixing of lt xlpe...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915842 work to install an additional 63 / 100 kva transformer in view of the problem of low voltage in the areas fed from various 33 / 11 kv sub stations under the bijne plan year 2023 24 under electricity distribution division ii, etawah. . 1 carriage of the following material from store center kunera etawah to site of work under jurisdiction of edd ii etawah under business plan ( 20 cr scheme ) through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work. 2 pcc pole 8.5 mtr 3 stp 55 pole 11 mtr long 4 line materials material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required 5 weasel conductor 6 lt abc ( 3x120+1x95+1x16 ) sqmm 7 63 kva transformer 11 / 0.4 kv 8 100 kva transformer 11 / 0.4 kv 9 grouting of pole 10 grouting of double pole structure 11 installation of stay set complete with grouting and nuzzling etc. 12 earthing of poles by fixing earthing rods and binding with earth wire 13 installation of cross arm 14 installation of distribution box 3 phase 15 installation of distribution box clamp 16 installation of ms top channel 17 installation of fuse set 18 installation of i hook with clamp 19 installation of t / f base angle 20 installation of ms nut bolt 21 installation of suspention clamp 22 installation of ms dropper channel 23 installation of f clamp for stp 24 installation of cross arm v type 25 installation of cross arm for stp 26 installation of 11 kv polymeter pin insulator 27 installation of 11 kv polymeter disc insulator 28 laying, sagging and stringing and jumpering / binding etc. oflt abc in 11 kv / lt lines as per respo manual and as per direction of executive engineer. 29 laying, sagging and stringing and jumpering / binding etc. ofacsr weasel conductor in 11 kv / lt lines as per respo manual and as per direction of executive engineer. 30 mounting of 63 kva transformer on the single pole / double pole / plinth structures with connections thereof. 31 mounting of 100 kva transformer on the single pole / double pole / plinth structures with connections thereof....

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915783 the work for construction / railway crossing in the area ofeudd hathras . 1 the work for obtain the permission for road crossing of national highway and railway crossing each 01 no 2 the work of drilling hole in rail way crossing and national high way to giving hdpe pipe properlly the all cost of labour and t&p and drill machine which required for complition of work...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915673 work related to replacement of vcb, construction of sub stations and wiring and installation of dilapidated gi wire, pole and guarding under the system modernization and business plan scheme in the area of ​​power distribution division khurja. 2 safe carriage of s.t.pole, sp 55 11mtr long, from store center to site store with loading & unloading at both ends respectively distance within 0 to 50 kms. 3 pcc poles 8.5 mtr. long 4 pcc poles 9 mtr. long 5 st poles 9 mtr. long 6 st poles 11 mtr. long 7 st poles 13 mtr. long 8 loading, safe carriage & unloading of heavy stock material v type, disc insulator, pin insulator, etc from store center to site store with proper stacking of material, distancewithin 150kms. 9 loading, safe carriage & unloading of lt / ht cable, t / f, vcb & control panal etc from store center to site store with proper stacking of material, distancewithin 150kms. 10 lt pvc cable al 1x240 sq mm 11 lt pvc cable al 1x400 sq mm 12 lt pvc cable al 1x630 sq mm 13 lt xlpe cable 3.5x150 / 70 sq mm 14 lt xlpe cable 3.5x240 sq mm 15 lt xlpe cable 3.5x400 sq mm 16 lt xlpe cable 1x120 sq mm 17 3x300 sq.mm. xlpe cable 11 kv 18 3x185 sq.mm. xlpe cable 11 kv 19 3x120 sq.mm. xlpe cable 11 kv 20 3x70 sq.mm. xlpe cable 11 kv 21 3x300 sq.mm. xlpe cable 33 kv 22 3x120 / 185 sq.mm. xlpe cable 33 kv 23 3x120+1x95+1x16 sq mm ab cable 24 3x95+1x50+1x16 sq mm ab cable 25 3x50+1x35+1x16 sq mm ab cable 26 acsr dog conductor 27 acsr rabit conductor 28 acsr wisel conductor 29 11 kv vcb 30 11 kv ct / pt & ct all size 31 t / f 10 kva 11 / 0.25 kv 32 t / f 25 kva 11 / 0.4 kv 33 t / f 63 kva 11 / 0.4 kv 34 t / f 100 kva 11 / 0.4 kv 35 t / f 250 kva 11 / 0.4 kv 36 t / f 400 kva 11 / 0.4 kv 37 power t / f 5 mva to 10 mva 38 erection of single pole st pole 11 mtr long of 33 kvfittingsas per respo drawing top channal, dropper channal, x bracing set, disc insulator, pin insulator, guarding angle f bracket and etc as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work. 39 pcc poles 8.5 mtr. long 40 pcc poles 9 mtr. long 41 st poles 9 mtr. long 42 st poles 11 mtr. long 43 st poles 13 mtr. long 44 erection ofdobule pole st pole 11 mtr long of 33 kvfittingsas per respo drawing top channal, dropper channal, x bracing set, disc insulator, pin insulator, guarding angle f bracket and etc as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work. 45 pcc poles 8.5 mtr. long 46 pcc poles 9 mtr. long 47 st poles 9 mtr. long 48 st poles 11 mtr. long 49 st poles 13 mtr. long 50 excavation of for each and grouting of single pole as per respo drawing and as per direction of engineer incharge including the cost of labour, t&p and carrier etc.the support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of cement, sand, stone ballast, stone pad etc. as per actual site requirement 51 pcc poles 8.5 mtr. long 52 pcc poles 9 mtr. long 53 st poles 9 mtr. long 54 st poles 11 mtr. long 55 st poles 13 mtr. long 56 excavation of for each and grouting of dobule pole as per respo drawing and as per direction of engineer incharge including the cost of labour, t&p and carrier etc.the support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of cement, sand, stone ballast, stone pad etc. as per actual site requirement 57 pcc poles 8.5 mtr. long 58 pcc poles 9 mtr. long 59 st poles 9 mtr. long 60 st poles 11 mtr. long 61 st poles 13 mtr. long 62 pleanth of pole 63 garding of 11 kv line 64 garding of 33 kv line 65 provading and fixing of 11 kv stay set including the work of nozelling etc. as per respo manual and also including the cost of all grouting material, labour, t&p etc required for proper completion of work. 66 grouting of 11 kv stay set including the work of nozelling etc. as per respo manual and also including the cost of all the support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of cement, sand, stone ballast, stone etc. as per actual site requirement , labour, t&p etc required for proper completion of work. 67 provading and fixing of 33 kv stay set including the work of nozelling etc. as per respo manual and also including the cost of all grouting material, labour, t&p etc required for proper completion of work. 68 grouting of 33 kv stay set including the work of nozelling etc. as per respo manual and also including the cost of all the support shall be grouted with cement, sand and stone ballast in ratio 1:4:8 including the cost of cement, sand, stone ballast, stone etc. as per actual site requirement , labour, t&p etc required for proper completion of work. 69 provading and fixing of earthing rod and wire asper respo manual and as per direction of supervising engineer including the cost of labour, t&p etc. required for proper completion of work. 70 laying sagging stringing and binding and jumpering etc of following acsr conductor / wisel / rabit / abc all size on the newly erected poles as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc. required for proper completion of work. 71 lt pvc cable al 1x240 sq mm 72 lt pvc cable al 1x400 sq mm 73 lt pvc cable al 1x630 sq mm 74 lt xlpe cable 3.5x150 / 70 sq mm 75 lt xlpe cable 3.5x240 sq mm 76 lt xlpe cable 1x120 sq mm 77 3x300 sq.mm. xlpe cable 11 kv 78 3x185 sq.mm. xlpe cable 11 kv 79 3x120 sq.mm. xlpe cable 11 kv 80 3x70 sq.mm. xlpe cable 11 kv 81 3x300 sq.mm. xlpe cable 33 kv 82 3x120 / 185 sq.mm. xlpe cable 33 kv 83 3x120+1x95+1x16 sq mm ab cable 84 3x95+1x50+1x16 sq mm ab cable 85 3x50+1x35+1x16 sq mm ab cable 86 acsr dog conductor 87 acsr rabit conductor 88 acsr wisel conductor 89 provading and fixing of 11 kv cable jointing kit for 3x120 / 185 / 300sq.mm 90 provading and fixing of 33 kv cable jointing kit for 3x120 / 185 / 300sq.mm 91 provading and fixing of 11 kv cable jointing statrough kit for 3x120 / 185 / 300sq.mm 92 provading and fixing of 33 kv cable jointing statrough kit for 3x120 / 185 / 300sq.mm 93 dismantling old t / f from site to esc stor. 94 the work of instulation to all size of vcb & t / f at different site. 95 11 kv vcb 96 11 kv ct / pt & ct all size 97 t / f 10 kva 11 / 0.25 kv 98 t / f 25 kva 11 / 0.4 kv 99 t / f 63 kva 11 / 0.4 kv 100 t / f 100 kva 11 / 0.4 kv 101 t / f 250 kva 11 / 0.4 kv 102 t / f 400 kva 11 / 0.4 kv 103 power t / f 5 mva to 10 mva 104 the work of fixing 11 kv pin insulator 105 the work of fixing 11 kv disc insulator with fitting 106 the work of fixing 33 kv pin insulator 107 the work of fixing 33 kv disc insulator with fitting 108 tightning of stay 109 making jumpers on section points, byfixing of proper sizes, suitable for acsr conductor.sectional double / four pole. 110 provading and fixing of danger plate. 111 testing and commissioning of 11 kv vcb. 112 replacement of damage pole 11mtr / 13mtr. 113 replacement of damage pole 8.5mtr / 9mtr. 114 providing & fixing of water level earthing with standred size strip & coper wire with water level. 115 providing & fixing of g.i pipe for cable d / p 116 providing & fixing of number plate. 117 providing & fixing of cable root marker. 118 chopping of branches of trees of eucalyptus, neem, keekar and other kind of trees along the route of the line and disposal of the same at suitable place. 119 u / g cable work of 11 kv line detail are blow 120 drilling of two parallel bores by trench less method by horizantal boring by hdd machine at respo ground level for 11 kv cable 121 providing & fixing hdpe pipe for 11 kv cable off size 122 providing & fixing and interconnecting 6 mtr. long pieces of hdpe pipe shocket. 123 digging of pits of size 4 mtr x 4 mtr x 1.5 mtr. for cable loop 124 restoration of pit after laying of cable loop 125 restoration of kacha road after laying of cable. 126 restoration of pakka road after laying of cable. 127 laying and pulling of 11 kv xlpe cable off size throug hdpe pipe 128 hi port test for 11 kvoff size xlpe cable one circuit. 129 hoisting of 11 kv off size xlpe cable on double pole structure through gi pipe off size fixed on pole structure including its jumpring complete with clamps bolts and nuts. 130 digging of cable trench for all type cable laying 131 cable laying in cable trench. 132 drilling of two parallel bores by trench less method by horizantal boring by hdd machine and other surose for road / nala / railway / utility area crossing etc. 133 u / g cable work of 33 kv line detail are blow 134 drilling of two parallel bores by trench less method by horizantal boring by hdd machine at respo ground level 135 providing & fixing hdpe pipe for 11 kv cable off size 136 providing & fixing and interconnecting 6 mtr. long pieces of hdpe pipe shocket. 137 digging of pits of size 4 mtr x 4 mtr x 1.5 mtr. for cable loop 138 restoration of pit after laying of cable loop 139 restoration of kacha road after laying of cable. 140 restoration of pakka road after laying of cable. 141 laying and pulling of 33 kv xlpe cable off size throug hdpe pipe 142 hi port test for 33 kvoff size xlpe cable all ckt 143 hoisting of 33 kv off size xlpe cable on double pole / four poles structure through gi pipe off size fixed on pole structure including its jumpring complete with clamps bolts and nuts. 144 the follwing materialwill be provided & fixing by the contractor 145 g.i.wire 6 / 8 swg 146 ms channel 125x65 mm for top & dropper 147 ms channel 125x65 mmfor t off channel 148 ms channel 125x65 mmfor side barcket 149 ms channel 100x50 mm for top & dropper 150 ms channel 100x50 mm for t off channel 151 ms channel 100x50 mmfor side barcket 152 ms angle 65x65x6 mm for t / f base 153 ms angle 65x65x6 mm for line gaurding 154 11 kv steel x arm 155 33 kv steel x arm 156 pole extenstion any type 157 nut bolts off size 158 ms clamp off size for 11 kv line 159 ms clamp off size for 33 kv line 160 ms clamp off size for lt line 161 the work of making 0f t / f planth for 250 / 400 / 630 kva t / f 162 the work of reparing 0f t / f planth for 250 / 400 / 630 kva t / f 163 the work of making 0f t / f fancing for 250 / 400 / 630 kva t / f 164 frp fencing ( 8feet height including civil work ) ( 2.2x2.2x2.2mtr =10.6m3 ) 165 the work of reparing 0f t / f fancing for 250 / 400 / 630 kva t / f 166 chemical earthing 167 dismantling cumsuer conection per pole 168 distribution box 3 phase 169 distribution box single phase 170 prc clamp 171 all. 1x16sq.mm single lead 172 lt pvc tape 173 ht tape 174 lock for distribution box 175 re conection work per conjumer 176 gi hook 177 j hook 178 suspension clamp 179 dead end clamp 180 11 kv tpmo set 181 11 kv fuse set 182 lt stay insulator 183 off size crimping lugs 184 off size of d / t t / fall. busbar. 185 inter connction work of 11kv new feeder & old feeder 186 reinstlotion work of old feeder vcb 187 other item dismentling regarding for vcb reinstallation work 188 reinstlotion work of old feeder panel. 189 other item dismentling regarding for panel reinstallation work 190 liasoning charge for nhai / npp bsr / railway permision 191 other item dismentling including vcb & reinstallation work 192 painting of pole 193 carrige of all dismantle mattril sit to stor center bsr. 194 per pole support soil fulling for insttalation of pole...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915648 regarding making necessary for strengthening the tripping and protection system of 33 kv lines under the system modernization and business plan scheme in the area of ​​electrical testing section i, bulandshahr. 2 safe carriage of 33kv ct pt, 33 &11 kv vcb control paneletc, from store center to site store with loading & unloading at both ends respectively distance within 0 to 50 kms. 3 33 kv pt ratio 33 kv / 110v 4 line site 33 kv ct ratio 400 200 / 1 1 1a 5 bus site 33 kv ct ratio 200 100 / 1 1 1a 6 33 kv control pannel single t / f 7 33 kv control pannel double t / f 8 new 33 kv vcb 9 erection of 33kv ct pt, 33 &11 kv vcb control paneletc, as per direction of engineer incharge including the cost of labour, t&p and coplet work of insttlation matterial carrier etc. required for proper completion of work. 10 33 kv pt ratio 33 kv / 110v 11 33 kv ct ratio 400 200 / 1 1 1a 12 33 kv ct ratio 200 100 / 1 1 1a 13 33 kv control pannel single t / f 14 33 kv control pannel double t / f 15 33 kv vcb for line site 16 33 kv control pannel for double power transformer 17 new 33 kv control pannel for single power transformer 18 the follwing materialwill be provided & fixing by the contractor 19 repairing of 33 kv line / bus isolater zaw 20 repairing of 33 kv line / bus isolater blade. 21 repairing of 33 kv line / bus isolater clamp. 22 repairing of 33 kv vcb includingtripping coil, closing coil, tripping plunjer etc 23 repairing and renovation of old power t / f 10mva & 5mva planth 24 repairing of 33 kv vcb controling moter indication lamp etc 25 repairing & replacment of 33 kv vaccume intraptor, clamp, etc 26 repairing of 33 kv control pannel indicator lamp tnc switch, volt meter, amp.meter etc 27 repairing of 33 kv control pannel wiring. 28 repairing and renovation of control cable trunch switch yard 29 repairing & replacement of jumfring isolater, fuse set, ct, pt by doc condctor in switch yard 30 providing & fixing of junction box for ct 31 providing & fixing of junction box for pt 32 providing & fixing of 33 kv l.a. 33 providing & fixing of wti for 10 mva power transformer 34 providing & fixing of wti for 5 mva power transformer 35 providing & fixing of oti for 10 mva power transformer 36 providing & fixing of oti for 5 mva power transformer 37 provading & fixing of control cable for 33 kv control pannel size 4x2.5 mm sq 38 providing & fixing of protection relay for 33 kv pannel 39 providing & fixing of 240 / 24 v battery charger 40 providing & fixing of 24 v battery set 41 providing & fixing of master relay for 33 kv pannel 42 providing & fixing of structure for 33 kv vcb 43 providing & fixing of structure for new 33 kv pt 44 providing & fixing of structure for new 33 kv ct 45 providing & fixing of structure for new 33 kv la 46 providing & fixing of structure for 33 kv post insulator. 47 providing & fixing of structure for 33 kv line / bus isuloter 48 providing & fixing of structure for 33 kv fuse set. 49 providing & fixing of structure for 11 kv cable. 50 providing & fixing of structure for 33 kv cable. 51 provading & fixing of 33 kv fuse set 52 providing & fixing of 33 kv post insulater 53 providing & fixing of 33 kv post insulater clamp 54 providing & fixing of 33 kv la clamp 55 providing & fixing of 33 kv fuse set clamp 56 providing & fixing of 33 kv ct clamp 57 providing & fixing of 33 kv pt clamp 58 providing & fixing of 33 kv pg clamp 59 providing & fixing of earthing of power t / f...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915630 electricity distribution division hamirpur under border electricity distribution sub division maudaha ( 1 ) 33 / 11 k.c. 11 kb damaged in power substation chhani. switchgear replacement work ( 2 ) 33 / 11 kb 11 kv ti mogkandar feeder operated from power sub station chhani. work of replacement of long and dilapidated tension in main line ( 3 ) 33 / 11 kv. 11 kb operated from power substation chhani. bajehata kauhar gets 11 kv. work to replace long spans and dilapidated wires of main line work 1 supply & erection 2 pcc pole 8.5 m long ( provided by department ) 3 11 kv ms x arm holding clamp with nut & bolt 4 11 kv pin insulator with pin ( provided by department ) 5 11 kv disc insulator with pin ( provided by department ) 6 f bracket with bolt & nut 7 11 kv steel x arm 8 acsr weasel conductor ( provided by department ) 9 11 kv switchgear i / c 600 / 300 / 5a 350 mva ( provided by department ) 10 11 kv switchgear o / c 200 / 100 / 5a 350 mva ( provided by department ) 11 dismentling of 11 kv old line 12 stay set 16x1800 mm 13 loading, unloading & cartage of old conductor work site to store center 14 straightening of tillted pole line at various place as per direction of supervising engineer including the cost of labour and t&p etc required for proper completion of work 15 33 kv bus isolator 16 33 kv lightening arrestor 17 xlpe cable 3x300 sqmm for 11 kv line 18 33 kv vcb with single t / f control panel & ct 400 / 200 / 100 amp 19 grouting of pole 20 xlpe cable 3x185 sqmm for 11 kv line 21 11 kv cable jointing kit 3x300 sqmm ( indoor & outdoor ) 22 11 kv cable jointing kit 3x185 sqmm ( indoor & outdoor ) 23 24 volt battery & battery charger with cabinet 24 gi pipe for db ( 1 m long ) 25 cost of copper core 750 gm weight 26 cost of copper wire 6 swg 27 copper bond 28 make hold of size 18 mm dia in gi pipe 29 xlpe cable 3x185 sqmm for 11 kv line 30 pipe boaring earthing...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915496 tender for installation of new meter / replacement of defective meter under edd ii hathras 1 carriage of single phase energy meter from electricity store center, to site(distance approx 50 kms.) and then prepairing the meter by fixig plastic/ hologram seals and entering meter data on meter register accordingly, and then marking the lab meter no. on meter cover with permanent marker pen and then cartage of the meter from test lab to respective 33/11 kv sub station of supervising engineer, including the work of loading, unloading and stacking the meters at the respective ends, and also including the cost of arragement of labour, t&p, carrier required for proper completion of work, as per provisions laid down in tender document 2 installation of meter at outside the premises of consumers, including the work of laying and proper fixing of cable from respective pole to meter incuding the work of sealing and filling of sealing certificate properly. work also includes cartage of 2x4 sq.mm lt cable from store to site of work, if required, as per provisions laid down in tender document 3 back cartege of defective meter (witch replace from site meter) from pit site of work to dump side and dump site to test lab/test division (distance approx 50 kms.) ...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39915304 tender for installation of new meter / replacement of defective meter under edd iii, sasni 1 carriage of single phase energy meter from electricity store center, to site ( distance approx 50 kms. ) and then prepairing the meter by fixig plastic / hologram seals and entering meter data on meter register accordingly, and then marking the lab meter no. on meter cover with permanent marker pen and then cartage of the meter from test lab to respective 33 / 11 kv sub station of supervising engineer, including the work of loading, unloading and stacking the meters at the respective ends, and also including the cost of arragement of labour, t&p, carrier required for proper completion of work, as per provisions laid down in tender document 2 installation of meter at outside the premises of consumers, including the work of laying and proper fixing of cable from respective pole to meter incuding the work of sealing and filling of sealing certificate properly. work also includes cartage of 2x4 sq.mm lt cable from store to site of work, if required, as per provisions laid down in tender document 3 back cartege of defective meter ( witch replace from site meter ) from pit site of work to dump side and dump site to test lab / test division ( distance approx 50 kms. ) ...

Department Of Irrigation - Uttar Pradesh

39915092 tender for internal clearance for improving drainage capacityof gangro drain from km 0.000 to km 11.866; 1 clearing thick bushes & throney jungle without uprooting with disposal 2 silt clearance / trench digging including lift upto 1.5m and lead upto 6 m, including cost of driver / assistant driver, pol, maintenance of machine, contractor profit, taxes etc but excluding leveling, dressing & compaction.a ) by hydraulic excavator / jcb / equivalent capacity 25 cum / hour ie. 1000 / 25. ( rs. 1000 per hour ) 3 extra for rough / partial dressing of excavated earth / silt i / c cost of labour, t&p etc complete for proper completion of work. 4 extra for slush & lehel for earth work excluding dewatering. 5 scraping of existing internel secion i / c bed & slope by manual labour etc for proper completion of work....

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39914967 installation of new meter / replacement of defective meter under edd ivsadabad 1 carriage of single phase energy meter from electricity store center, to site ( distance approx 50 kms. ) and then prepairing the meter by fixig plastic / hologram seals and entering meter data on meter register accordingly, and then marking the lab meter no. on meter cover with permanent marker pen and then cartage of the meter from test lab to respective 33 / 11 kv sub station of supervising engineer, including the work of loading, unloading and stacking the meters at the respective ends, and also including the cost of arragement of labour, t&p, carrier required for proper completion of work, as per provisions laid down in tender document 2 installation of meter at outside the premises of consumers, including the work of laying and proper fixing of cable from respective pole to meter incuding the work of sealing and filling of sealing certificate properly. work also includes cartage of 2x4 sq.mm lt cable from store to site of work, if required, as per provisions laid down in tender document 3 back cartege of defective meter ( witch replace from site meter ) from pit site of work to dump side and dump site to test lab / test division ( distance approx 50 kms. ) ...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39914549 distribution sub division 33 / 11 kv under hamirpur. 11 kv energized from power sub station jalla. work of replacing long spans and dilapidated wires in shankarpur feeder. 1 supply & erection 2 pcc pole 8.5 m long ( provided by department ) 3 stone pad 300x300x75 mm 4 x arm ms angle 65x65x6 mm v type 5 cross arm holding clamps with bolt & nut ( provided by department ) 6 11 kv pin insulator with pin ( provided by department ) 7 11 kv disc fitting 45 kn t &t&c ( provided by department ) 8 11 kv disc insulator ( provided by department ) 9 t off channel 10 clamp for channel 11 11 kv f clamp 12 earthing complete 13 concreating of stay 14 acsr weasel conductor ( provided by department ) 15 straightening of tilled pole 33 kv line at various place as per direction of supervising engineer including the cost of labour and t&p etc required for proper completion of work 16 dismantling of old line 17 loading unloading & cartage of old conductor work site to store center 18 stay set 16x1800 19 grouting of pole...

Panchayat Raj Department - Uttar Pradesh

39914511 tender for work no. 03 block khurja may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39914455 carrying out the 20 nos. work work increasing capacity of 11 / 0.4 kv s / s at different places under eudd i / v / vii, noida in the juridiction of eudc i, noida ( system strengthening works in municipal area including noida rs. 72.00 crore for noida zone ) . 2 cartage of pcc poles 8.5 mtr long from esc noida / sahibabad / ghaziabad / any other esc of meerut discom to je store and from je store to site of work including loading and unloading at both ends. 3 cartage of lt abc 3x120+1x95+1x16 sq.mm. from esc noida / sahibabad / ghaziabad / any other esc of meerut discom to je store and from je store to site of work including loading and unloading at both ends. 4 the excavation of foundation pit in cc road / mix soil / normal soil / soft & hard rack by using heavy duty compressor and its back filling and leveling etc. the size of the pit will be 600x600x1800 mm for each pole and having a depth of 1 / 6 of the full length of the support. 5 erection of pole on 8.5 mtr. long pcc pole for lt line including fixing of all accessories of lt line as per respo schedule complete in all respects. 6 grouting of each pole ( in ratio of 1:4:8 in cement, sand and brick ballast ) in size 450mmx450mmx1800 mm as per respo schedule complete in all respects. 7 laying, lifting and final binding, sagging of lt abc lt abc 3x120+1x95+1x16 sq.mm. including fixing of all accessories as per respo schedule complete in all respects. 8 providing & fabrication / fixing of following material of best quality for completion of work as per site requirement : 9 11 kv fuse set 10 lt pvc cable al. 1x630 sq.mm. 11 lt pvc cable al. 1x400 sq.mm. 12 al. lug long barrel, off size ( ls ) 630 sq.mm. 13 suspension clamp with i hook 14 dead end clamp with i hook 15 lt piercing connector for size 120 / 95 16 construction of new distribution 400 / 250 kva t / f plinth. the size of plinth shall be 2 mtrs. long, 2 mtrs. wide and height 1.5 mtrs. from ground level with 15 cm thick top cc slab. the above work includes excavation of earth, laying of bring ballast pad for foundation brick work, cc and plastering and proper curing complete with all respects as per respo schedule. 17 safe loading and carriage of 400 kva t / f ( 24 nos. ) , 250 kva t / f ( 03 nos. ) & 100 kva t / f ( 01 no. ) from esc noida / sahibabad / ghaziabad / any other esc of meerut discom to je store and from je store to site of work including loading and unloading at both ends 18 mounting, installation of 400 kva t / f ( 24 nos. ) , 250 kva t / f ( 03 nos. ) & 100 kva t / f ( 01 no. ) on above / existing plinth, alongwith double earthing of the same, complete in all respect as per respo schedule. 19 providing and installation oflt acb630 amp. with cabinet / structure ( make l&t, schneider, abb, hevells ) as per following specification with all relevant certificate : 20 630 amp. 03 pole fixed manual acb. 21 red / yellow / blue light indication 22 on & off indication 23 amp., voltmeter& energy meter digital 24 metering c.t 630 / 5a, 25 panel fabrication of size 1250mm x 900mm x 600 mmmade of m.s sheet 14 gauge with powder coating with panel lock and key arrangement. ( two nos ) . and additional locking arrangement seprately including providing hut type shape as per drg. 26 fabrication ofaluminium bus bar for each phases 27 incoming size 425 mm x 50mmx12 mm ( twin ) 28 out going size 720 mm x 50mm x 12 mm ( twin ) 29 neutral size 900mmx50mmx12 mm. 30 fabrication of pannel stand made of m.s angle of size 900mm x 600mm x 500 mm as per drg. 31 assembly of above acb, indicators, meters, metering ct & bus bar arrangment in the panel, fitting the panel on stand with nut and boltswith wiringetc. & grouting inratio 1:4:8 with cement, coarse sand and brick blast. 32 providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on l.t side of t / f. 33 making all connections with acb & distribution t / f and commissioning the acb complete in all respect. 34 providing and installation of chemical earthing for distribution transformers ( body & neutral ) and acb ( with all material and labour ) after installation resistance should be less than one ohm. as per following ( the all material and labour shall be provided by the contractor with 12 month guarantee for resistance value less than one ohm. ) : 35 providing of earth elctrode for chemical earthing pipe in pipe typeproper hot deep galvanization dia 50 mm length 3 mtr 32mm x 6mmterminal connection hole dia 8mm the cavity between the pipe & pipe is filled with conductive mixture for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystalline compound is to be injected in the electrode assembly. it is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. the outer pipe of the elctrode should be galavanized the characteristics of this compound is highly cnductive, non magnetic & non corrosive in g.i. including providing of backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound ( ground resistance enhancement powder 50 kgs each cpri tested for dstribution t / f & acb installed at above 11 / 0.4 kv l.t. substation. 36 providing and fixing of gi strip of size 32 mm x 6 mm suitable for distribution t / f & acb installed at above 11 / 0.4 kv l.t. substation. 37 providing and fixing of pvc pit covers for above earthing electrode terminals. 38 work of providing and fixing of 14 nos. new wiremesh fencing of 11 / 0.4 kv l.t. sub station installed at above place as per following : 39 providing & fixing of new wiremesh fencing frames of size 12x15x6for each fencing of lt sub stations. ) ( all material provided by contractor for above work. ) 40 construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 ( 1 cement : 6 coarse sand ) for link in the size of 0.22mx0.60m ( 0.30m in earth, 0.30m above ground level ) including plaster in cement mortar 1:4 and finishing with water proof cement paint. ( approx construction 12 mtrs. boundry / toe wall for each fencing of lt sub stations. ) ( all material provided by contractor for above work ) 41 disconncetion of all jumper / connection from t / f as per requirement. 42 reconncetion of all jumper / connection from t / f after replacement as per requirement. 43 dismantling of existing 250 kva t / f ( 24 nos. ) , 160 kva t / f ( 01 no. ) , 100 kva t / f ( 01 no. ) & 63 kva t / f ( 02 no. ) from work site. 44 carriage of above dismantled 250 kva t / f ( 24 nos. ) , 160 kva t / f ( 01 no. ) , 100 kva t / f ( 01 no. ) & 63 kva t / f ( 02 no. ) from works site to je store / central store & proper stacking with loading & unloading....

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39914451 work for increasing capacity of 33 / 11 kv substation kiladevi ( 2x5 to 2x10mva ) , kirari ( 2x5 to 2x10mva ) , tanda kothi ( 10+5 to 2x10mva ) , achoda kambho ( 10+8 to 2x10mva ) , sehra urf sainda ( 2x5 to 2x10mva ) and 33 / 11kv s / s fatthepur sarai ( 10+5 to 2x10mva ) , district sambhal. 1 supply of following items : ( by contractor ) for item no. 1.01 to 1.081.01 33 kv post insulator 2 structure 33 kv ct on 125x65x6 mm galvanised channel ( as per respo norms ) 3 2x2.5 mm2 control cable 4 4x2.5 mm2 control cable 5 11 kv 3×300mm2 xlpe cable jointing kit ( outdoor ) 6 11 kv 3×300mm2 xlpe cable jointing kit ( indoor ) 7 ms nut & bolts 8 33kv ct junction box 9 safe carriage of following with loading & unloading at both ends respectively. ( under jurisdiction of pvvnl ) for item no. 2.01 to 2.072.01 11 kv incoming switch gear 600 / 300 / 5a 350mva 10 11 kv outgoing switch gear 200 / 100 / 5a 350mva 11 33kv mocb / vcb 800a750mva 12 33kv control panel for double t / f without differential relay 13 33kv ct 200 / 100 / 1 1a 14 acsr dog conductor 15 11kv 3x300 mm2xlpe cable / 11kv 3x185mm2 xlpe cable / 11kv 3x50mm2 xlpe cable 16 renovation / repairing of old transformer plinth 17 disconnecting ht cable connection from 33kv side &11kv side of 05mva / 8mva power transformer for removing power transformer from plinth after proper shutdown. dismantling of 11kv cable support structure, copper bus bar structure, m.s.frame etc. 18 disconnecting copper flexible / earthing strip from power transformer neutral & dismentling neutral earthing systemto facilitate removal of power transformer from plinth. 19 disconnecting earthing strip from body of 05mva / 8mva power transformer. 20 draining of transformer oil from conservator, radiators of existing 05 mva / 08mva t / f, at respective 33 / 11 kv s / s into the dry & clean drums and stacking at the safe place in substation outside of switchyard. empty drums shall be provided & arranged by contractor. 21 removal of conservator, radiators and other accessories from existing 05 mva / 08mva power transformer. 22 safe shifting of 05 mva / 08mva power transformer main body and other accessories from the substation switchyard to outside the switchyard at suitable place assigned by concern j.e / s.d.o 23 safe shifting of 10mva / 05mva, 33 / 11 kv, power transformer from out side of switchyard to near power transformer plinth in switchyard. 24 erection & installation of 10mva / 05mva power transformer on power transformer plinth by fixing all accessories like radiators, conservator tank, filling the transformer oil to desired level and ensuring that there is no leakage, complete job in all respect. reconnecting 2 nos. earthing strip to transformer body. 25 earthing of outdoor equipments in switchyard, as per site requirement / as per pvvnl guideline details as given below: for item no. 7.01 to 7.027.01 providing &laying of g.i.strip of size 50x6mm for connecting the earthmat with each equipment ( bus isolators, 33kv c.t., 33kv v.c.b., l.as., fuse set, post insulators, t / f body & its neutral and m.s.frame of cabe supporting structure ) , various steel structures. the work also includes cutting, bending, straightening, over laping and welding the earth strip with earth mat and by using high quality arc welding in already digged trenches, as per pvvnl guidline and as per site requirement. 26 providing m.s round 32mm dia and making delta earthing for power t / f neutral / l.a as per respo norms. 27 making earthing of all 11kv switchgears, p.t. and other outdoor equipments on both earth terminal inside the control room by providing g.i.strip in size 50x6mm. with 32mm. dia m.s.round laid in trench with proper electric welding, as per pvvnl guidline. 28 supply & erection of water level earthing by boring and lowering by providing of g.i.pipe size 40mm dia, into the ground upto water level or minimum 20mtr, which ever is more, with the lower end of solid copper cone approx 224mm long and 750gm in weight shall be provided and screwed in pipe as well as bringing out a continuous copper wire 6 swg, from the cone upto the ground surface where it will be bolted to the g.i. strip for transformer neutral connection, the g.i.strip will be connected to star point through providing copper bond strip of size 35x6mm, as per pvvnl guidline. 29 excavation of earth in size, erection of structure by making plinth c.c ratio 1:3:6, 12mm thick plasting on plinth in ratio 1:4 : 10.01 – 33kv c.t strucure 30 installation & mounting of materials on erected structure ( the work also includes safe removal of old items & height incrasing of existing structures by providing m.s channel / angle as per site requirement if applicable ) : 11.01 33kv c.t ( 200 / 100 / 1a, 400 / 100 / 1a ) 31 hight increasing of old structures by providing required size g.i / m.s channel / angle as per site requirement ( mounted item safely remove, after hight increasing item safely mounted on structures ) 12.01 33kv l.a structure 32 construction of plinth for the structure of 33 kv vcb as per details : for item no. 13.01 to 13.05.13.01 a ) excavation of earth of size ( 2.4×1.5×1.0 ) m pits for construction of plinth. ( 3.6 cum ) 33 b ) brick ballast ratio ( 1:4:8 ) ( cement, sand & brick ballast ) for foundation work ( 2.4×1.5×0.15 ) m plinth. ( 0.54 cum ) 34 c ) c.c. work in ratio 1:2:4 ( cement, coarse sand &stone grit ) of 20mm size for making plinth of size ( 2.4×1.5×1.00 ) m and grouting of foundation bolts 04 nos. for 33 kv vcb. ( 3.6 cum ) 35 d ) 12 mm thick plaster with cement mortar in ratio 1:4 ( cement & fine sand ) of plinth of 0.15 m above ground level size ( 2.4×1.5 ) m. ( 4.77 cum ) 36 e ) assembling and installation of 33 kv vcb on the vcb out door structure on the plinth.adjustment of operating mechanism in proper alignment for smooth operation of the same. the work also includes fabrication of addition arrangement for proper fixing, if required and also safe removal of old 33kv vcb if applicable. 37 laying, stringing & sagging of acsr dog conductor from main bus bar to power t / f, through post insulator, bus isolator, c.ts, vcb and l.as., byproviding & fixing p.g.clamp / connectors, suitable for dog / panther. 38 erection of i / c switchgear, bus coupler, o / g switchgears & double t / f control panel in alignment, in control room, including safe shifting, from dump place. the work also includes safe removal of old switch gears to safe place if applicable. making 4no. pockets for each and providing / fixing of reg bolt by cc in ratio 1:2:4, with tightening also. as per pvvnl guidline. 39 commissioning & fixing of bus bar ( copper ) , between each switchgear, double t / f control panel control cable, by bolt, nut & washers and ht compound and providing & tapping ht tape, empire tape & pvc tape, on each joint & bus coupler connect which existing bus bar. ( if extra fitting / adjustment or suitable copper bus bar for fitment required then provided by the contractor ) 40 preparation of 11 kv power cable ends: as per respo specification of the following : for item no.17.01 to 17.0217.01 making ofcable end termination by heat shrinkable out door jointing kits suitable for 11kv, 3x300q.mm xlpe cable. providing, fixing and crimping of proper size good quality lugs complete in all respect. 41 making ofcable end termination by heat shrinkable indoor jointing kits suitable for 11kv, 3x300sq.mm xlpe cable.providing, fixing and crimping of proper size good quality lugs complete in all respect. 42 providing all required materials & fabrication and erection of neutral earthing l type support made of m.s. channel size 100×50mm. structure shall be 4 mtr. long with 1 mtr. arms. structure shall be grouted in ratio 1:3:6 in block size 300×300×700mm and painted with one coat of ready mixed primer and two coat of enamel aluminium paint work includes connecting neutral bushing rod of power transformer and m.s. earthing strip with the help of flexible copper bond size 35x6mm m.s. bolt and washer. 43 cable support : for item no. 19.01 to 19.0219.01 supply & fabrication and erection of cable support made of two pieces of m.s. channel ( 100x50x6 ) mm, 2.75 meter long, joined to each other by means of 5 nos. m.s. angle ( 50x50x6 ) mm pieces of size 0.75mtr long each by welding at equal intervals and grouting in a block of size ( 300x1000x1000 ) mm in c.c. 1:3:6 complete with one coat of ready mixed primer and two coats of al. paint. work includes providing of three nos. m.s. clamps made of ( 50x6 ) mm m.s. flat for holding the cable including nuts and bolts with stone pad of size ( 300x300x75mm ) . 44 providing & fixing 110mm dia 2mm thick 2m long g.i.pipe over 11kv, 3x300sq.mm xlpe cable before mounting the 2no. cable on cable support structure. work includes fixing of clamp, sealing of top and bottom end of the g.i.pipe. one end of g.i.pipe is to be buried under earth about 500mm. 45 copper bus bar support t type m.s.structure ( as per site requirement ) : for item no.20.01 to 20.02 20.01 supply & fabrication and grouting of m.s. frames 3.60 mt. long for support of copper bus bar. bus bar will be provided in l.v. side of power transformer. the m.s. frame shall be made of m.s. channel ( 100x50 ) mm in t shape. providing 2 nos. support of m.s. angle iron ( 50x50x6 ) mm, 0.60mt. long below the top channel, drilling of 3 nos. hole on the top channel for fixing of 03no. 33 kv post insulator. the m.s. frame shall be painted with one coat of primer & two coat of aluminium paint and grouting the frame in c.c. ratio 1:3:6 in a block of size ( 300x300x700 ) mm with stone pad of size ( 300x300x75mm ) . the work also includes the fixing of 33kv post insulator by aluminium binding wire in complete with nut & bolts. 46 supply & fabrication of copper bus bar of size ( 2400x50x6 ) mm in l.v. side for 05mva and ( 3000x65x8 ) mm for 10mva t / f as per requirementfor power transformer, work includes connection of outside bus bar in l.v. side busing rod of power transformer and other side with outdoor 11 kv cable box as well as providing empire tape and h.t. tape etc. for proper insulation work covering copper bus bar in complete. 47 fixing of cable box on 5mva / 10mva t / f, 11kv switchgears, by bolt & nuts and tapping the joints by providing ht / empire / pvc tape. 48 h.t. power cable laying : for item no.22.01 to 22.0222.01 laying and dressing of 11 kv 3×300 mm2 / 3×185 mm2 power cable in air / trench. 49 laying 11 kv, 3×300mm2 / 3×185mm2 xlpe, power cable from power t / f to incoming switchgear / outgoing switch gear to 11 kv double poles in the cable trench 0.45m wide, 0.90m depth. providing 150 mm thickness local sand for cushion beneath and 150 mm above the cable ( quantity of local sand required 0.375 cubm / m in length ) . the cable shall be duly protected by brick. on both side of cable by laying bricks vertically and bricks would also be laid horizontally on top of vertically laid bricks along the cable ( minimum 18 nos. per mtr. length are to be laid top and outer side along the cable. the work includes digging of trenches, laying of cable in under ground trenches, joining of terminals, back filling of earth and testing and commissioning of power cables etc. spare cable shall be left over and laid in the trenches in shape of 6m rings at both ends. at the end of feeder cables, where the cable is to be laid across pucca / main road, 150 mm dia g.i. pipe will be weared over the cable in the cable trench for the protection of cable. g.i pipe 150mm dia will be provided by contractor. 50 laying of control cable in packka trench, from vcb / cts / t / f to 33kv control panel and making connection for operation & protection of equipments, by using ferrules including commissioning battery charger with battery by providing copper lead with lugs etc & dressing of control cable and making arrangement for testing in the equipments. 51 construction of control cable trench in switchyard : for item no. 24.01 to 24.05 ( as per respo norms ) 24.01 – excavation of earth in size 0.80x0.40m., c.c.work in foundation in ratio 1:4:8 ( cement, sand & brick ballast ) with proper ramming in size 0.80x0.15m., ist class brick work in cement mortar in ratio 1:4. as per site requirement. 52 providing &grouting of m.s.strip of size 25x6mm in cable trench 100mm above floor level and at equal space distance 300mm 53 providing and grouting of m.s.angle iron of size 50x50x6mm in upper edge of trench. 54 c.c.work on the top in the ratio 1:2:4 in the grouting of edge of the trenches. & plastring of trench. 55 providing fabrication and fixing cable trench cover of providing m.s.angle iron size 40x40x6mm of size 0.3m wide 0.5 to 1.0 mtr length. as per site requirement. after construction of cable trench. 56 painting of the following structure with one coat of ready mixed primer and two coats of isi mark alumn. paint after rubbing with sand paper to the surface of the structure includidng labour and t&p complete in all respect.:for item no.25.01 to 25.0625.01 – line isolator structure 57 fuse set structure 58 post insulator, l.a.structure 59 v.c.b.structure, c.t.structure 60 m.s.frame for cable 61 hiring of d / g set, including carriage, loading, unloading & operating charges ( with fuel ) at 33 / 11kv substation, :for item no. 26.01 to 26.0226.01 – 20 kva, 3 phase d / g set for testing of power t / f & equipments installed at sub station. 62 5 kva, single phase d / g set for welding / testing of equipments installed at sub station. 63 providing required no. ofskilled technicians for testing & commisning to work on power t / f, ht / lt panels, during testing as assisting technical hands of test team during commissioning & energisation. after installation of new protection equipments ( 33kv vcb, c.t & double t / f, single t / f control panel ) the contractor will ensure its testing on his own expences. 64 carriage of received back material from site to concerned electricity store center : for item no. 28.01 to 28.0628.01 – double transformer control panel ( old & damage ) 65 33kv vcb ( old & damage ) 66 33kv ct 200 / 100 / 1 1a ( old & damage ) 67 11kv i / c vcb ( old & damage ) 68 11kv o / g vcb ( old & damage ) 69 05 / 08mva transformer ( old & used ) ...

Panchayat Raj Department - Uttar Pradesh

39914410 tender for work no. 13 block sikandrabad may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Panchayat Raj Department - Uttar Pradesh

39914378 tender for work no. 10 block jhangirabad may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Panchayat Raj Department - Uttar Pradesh

39914041 work no. 12 block unchagaon may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Panchayat Raj Department - Uttar Pradesh

39913883 tender for work no. 08 block anupshahr may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Panchayat Raj Department - Uttar Pradesh

39913870 tender for work no. 16 block pahasu may provision of drinking water and other works at various primary schools and public places 1 a boring work 2 water divertion and site clearance, cleaning mud etc. 3 digging of pit / injection of tank 2.10x1.8x2.45 m deep 4 transportation of boring material and boring set i / c loading and unloading at site etc. 5 preparation of lowering of 110 mm 6 kgf pvc assembly etc. 6 110 mm 6kgf pvc plain pipe 7 110 mm 6kgf pvc perforated / slotted pipe 8 110 mm 6kgf pvc coupler / socket 9 110 mm pvc end cap and top cap. 10 solvent cement 11 nylon cloth tugler bag 12 development of boring 13 25 mm dia pipe for air vent 14 injection tank & storage / filter tank 15 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the slide of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 m. from the foundation trenches. 16 concrete with 4 cm. guage brick ballast, fine sand of 1.25 f.m. and cement, in proportion of 12:6:1in foundation and under floors including supply of all materials, labour tools & plants etc. required for proper completion of the work. 17 1st class brick work in 1:4 cement andcores sand mortar in foundation and plinth including supply of all materils labour t&p etc required for proper completion of all work ( in m3 ) 18 cement conrete with 2 cm gauge approved stone gritet, coarse sand & cement in the propotion of 4:2:1 including supply of all materials labour tools & plants etc required for completion of the work. as per si no 279 a. 19 12 cm thick plaster with cement & coarse sand of 2.20 fineness mouslus in 1:4, over brick work min. thickness not be less then 1cm in cluiding supply of all materials labour tools & plant etc. required for proper completion of workas per direction of engineer as per si no 584 20 mstor in plain work such as rcc or r.b. work including bending forproper shapeand inclu ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 21 r.c.c. work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1:5:3 in lintels of door & windows excluding supply of reinforcement and its bending. but including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.new itemas in item 284 above but in slabs 1:1 1 / 2:3. 22 supply & fixing of 110 mm dia pvc pipe 6kgf / cm2 for drain etc. 23 supply & fixing of 110 mm dia pvc down pipe 6kgf / cm2etc. 24 brick or brick ballast filling in layer 25 mesh cloth for filter layer 1.40 micron 26 filling of 5 10 mm gravel in second layer. 27 course sand filling 1.5 2.00 mm. 28 part b water cooler ( r.o water ) 29 110mm / 63 mm p.v.c pipe strainer & allplate form material & supply market to constructed area 30 handpump machine sheet compsheet etc, all comp. 31 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 32 110 mm dia p.v.c pipe / 16.00kg / cm2 etc, all comp 33 63mm dia strainer including blinder pipeetc.all comp 34 110mm / 63 mm reducer pipe etc. all comp. 35 32mm medium quality g.i pipe etc. allcomp 36 holes work by pump and pressure methoddig of holes and rent of equipment & stand of tipai work etc all comp. 37 hydraulic pressure pump& 150 mm diastaiky clay andwork of concrete mix soil in holes0.00 15.0015.00 30.0030.00 45.00 38 p.v.c, 63mm pipe of blinder pipe and 110mm dia p.v.c of lower etc. all comp.0.oo 45.00m 39 in holes pipe and strainersurrounding work of coarse sand till strainer etc 40 between boredol & causing pipe filling of bentonite for comp. work etc. 41 indian mark ll, g.i pipe of handpump &establishment of bore with connected rod etc.all comp. 42 after establishment handpump checking byengineering etc. 43 after developed work with disinfectionwork material etc. all comp. 44 1.85m dia circle plate form round thehandpump i / c labour & material etc. 45 constructed nail with labour charge i / cmaterial etc. all comp. 46 envancing work etc. all comp. 47 water testing work etc. all comp. 48 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 49 providing 3 core p.v.c insulatedsubmercible propump panel to 50 p / fixing of sumbercible pump of approvedmakr with 1.00h.p capacity 51 providing 3 core p.v.c insulatedsubmercible propump panel to 52 excavation of earth in fdn & trencheso / soil i / c all comp. r.c.c pillers 53 p / l of in ( 1:6:12 ) with mix mortar i / c allcomp.for r.c.c pillersfor nali soak pit brick work plate form 54 1st class b / w in fnd & plinth in ( 1:4 ) withcement & c / sand i / c all compfor nali soak pit brick work plate form 55 12 mm thick plastering in ( 1:4 ) cement & c / sandmortar i / c allfor nali plate form soak pit 56 p / l of r.c.c in ( 1:2:4 ) with mix mortar i / c all comp.for r.c.c pillers 57 mild steel or iron work in plain c.c etc i / c allcomp. 58 p / i of d. p.c ( 1:2:4 ) with cement &c / sand20mm s / gritt etc. all comp. 59 s / fixing of m / s steel i / c all comp byweight l / s 60 s / fixing of water coolar i / c all comp. 61 s / fixing of r.o i / c all comp.charges l / s 62 water supply fittings i / c all comp. 63 s / fixing of electric fittings i / c all comp. 64 providing and fixing on terrace polyethylene water storage tank as per si no 21b.23 ( 500 liter each ) 65 providing & fixing granite stone sign board with letter writing including supply of all materials labour t&p ) 66 gst...

Meerut Municipal Corporation - Uttar Pradesh

39913500 in ward 03 bhagwatpura, from ramsinghs house to sandeep piwals house, upgradation of street and construction of road by drain and cc.; 1 dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the engineer in charge within a distance of 60 meter ( 200 feet ) . s.i 692 2 dismentalling of old interlocking tiles with all comp. s.i. no new item 4 3 earth work in filling 4 concrete with 4 cm. gauge brick ballast fine sand of 1.25 f.m. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. t & p etc. required for proper completion the work si no.273. 5 m 150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, t & p etc required for proper complition of the works.i no.305 a 6 cement concrete with 2.0 cm. gaug;e approved stone grid coarse sand & cement in the proportion of 4:2:1 including , t&p etc. s.i. 279 ( a ) 7 12 mm thick plaster 1:4 with cement and four course sand including supply all material and labour, t & etc. si no.584 ( a ) 8 supply and laying 53mm to 22.4mm size stone aggregate. 9 laying spreading and consolidation of 12 cm ( loose ) thick coat of stone ballast but excluding roller charge as per si no755 b 10 cast cement concrete with 2 cm gauge approved graded stonees grit coarse sand and cement in the proportion of 1:2:4 incluiding supply of all materials labour 11 r.c.c. work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 inslab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work includingcost of binding wire. the rate excludes making of drip course which shall be paid extra. 12 m.s. ( tor steel or plain ) in plain work such as r.c.c. or r.b. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. 13 deduction for old interlokingtile+all comp of work 14 deduction cost of old bricks bat 15 deduction cost of old bricks...

Meerut Municipal Corporation - Uttar Pradesh

39913307 tender for construction of drain and construction of road with interlocking tiles from raghuveers house to satpals house in ward 31 ghopla.; 1 earth work in filling including 12 km lead 2 concrete with 4 cm. gauge brick ballast fine sand of 1.25 f.m. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. t & p etc. required for proper completion the work 3 m 150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, t & p etc required for proper complition of the work 4 12 mm thick plaster 1:4 with cement and four course sand including supply all material and labour, t & etc. 5 cement concrete with 2.0 cm. gaug;e approved stone grid coarse sand & cement in the proportion of 4:2:1 including , t&p etc. 6 supply and stacking 53mm to 22.4mm size stone aggregate. 7 laying spreading and consolidation of 10 cm ( loose ) thick coat of stone ballast but excluding roller charge 8 supplying & fixing 80 mm thick precast colour cement concretei shapeinter locking paver block isi mark confirming to is 15658 2006 with top layer of minimum 5mm thickness having plan dimention 200x ( 160+120mm ) of op cement , smooth high gloss finish, skid resistant, manufactured from rubur moulds through vibro compression mechanism. the compressive strength of concrete pavar block shall not be less than40mpa and weight 4.5 kg per no.including cost of meterial, with blanket layer of 4.00cm thick fine sandincluding labour t& p etc required for proper completion of the work as directed by engineer in charge. colour tiles 9 rcc 1:1.5:3 in cement coarse sand and grit 2 cm. gauge. 10 mild steel or iron such as in plane reinforcement concrete. 11 supply / fixing of black granite stone sign bordwith cutting of given maters as per direction of engineer in charge in all complete...

Meerut Municipal Corporation - Uttar Pradesh

39913184 ward 68 repair of drain on the damaged road from abubupir to dilshads house and shahzad wali gali and ashifs house to mohammads house and shabir wali gali and construction work by cc; 1 supply and laying sand fill on road+all comp of work 2 concrete with 4 cm. gauge brick ballast fine sand of 1.25 f.m. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. t & p etc. required for proper completion the work si no.273. 3 m 150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, t & p etc required for proper complition of the works.i no.305 a 4 12 mm thick plaster 1:4 with cement and four course sand including supply all material and labour, t & etc. si no.584 ( a ) 5 cement concrete with 2.0 cm. gaug;e approved stone grid coarse sand & cement in the proportion of 4:2:1 including , t&p etc. s.i. 279 ( a ) 6 r.c.c. work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 inslab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work includingcost of binding wire. the rate excludes making of drip course which shall be paid extra. 7 m.s. ( tor steel or plain ) in plain work such as r.c.c. or r.b. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. 8 supply and laying 53mm to 22.4mm size stone aggregate. 9 laying spreading and consolidation of 12 cm ( loose ) thick coat of stone ballast but excluding roller charge as per si no755 b 10 construction of un reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 ( 1:1½:3 ) coarse and fine aggregates confirming to is 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer ofless then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work ( steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing ) , spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge / culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawing and technical specification clause 1501 including cost of polythene sheet and dowel bar and also including complete shifting of matrials & concrete etc. ( m 20 ) but when thikness of cc is less then 20 cm. ( without dowel bar ) ...

Public Works Department - Uttar Pradesh

39912310 tender for repair work in lucknow ballia road under state road; 1 providing laying spreading and compacting stone aggregates ofwater bound macadam specification including spreading in uniform thickness hand packing rolling with 3 wheeled steel / vibratory roller 80 100 kn. in stages to proper grade and camber applying and broomingrequisite type of binding materials stone dustto fill up the interstices of course aggregtate watering and compacting to the required density grading 3 as per technical specification clause 405.in pot holes. including all material , royalty, t& p, labour cessetc. but excluding g.s.t. 2 providing and applying tack coat with bitumen vg 10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.including all material , bitumen, royalty, t& p, labour cessetc. but excluding g.s.t. 3 providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder ( vg 30 ) @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects.including all material , bitumen, royalty, t& p, labour cessetc. but excluding g.s.t....

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39910931 ext: under marginal power distribution sub division of rath, power distribution division, ( 1 ) 33 / 11 kv. new 33 kb power substation in rath pratham. v.c.b. replacement work ( 2 ) 33 / 11 kv. old dilapidated 11 kv power sub centre rath pratham. b. c.b. replacement work ( 3 ) 33 / 11 kv. 250 kba. 400 k in power sub station rath pratham. b. a. 630 k. b. a. fencing work of transformers ( 4 ) 33 / 11 k.b. old l in power substation rath pratham. t.p.b. c. cable replacement. 2 plinth of distribution transformer (incl. of bricks, sand, cement, stone ballast, ms channel 125x65 mm, ms twisted barof size 20 mm) with labour cost 3 fencing of medium size of distribution transformer in rath town at varrious places. 4 earthing of various medium size of distribution transfomer which are installed in rath town hamirpur 5 33 kv bus isolator 6 33 kv lightening arrestor 7 structure for lightening arrestor 8 structure bus isolato...

Urban Development Department - Uttar Pradesh

39910119 bids are invited for manpower outsourcing services minimum wage skilled; admin; computer operator , manpower outsourcing services minimum wage skilled; admin; administrative operator or office assistant or executive assistant , manpower outsourcing services minimum wage semiskilled; others; driver lmv , manpower outsourcing services minimum wage unskilled; others; mazdoor / labour total quantity :...

Medical Health And Family Welfare - Uttar Pradesh

39909042 bids are invited for electrical and non bio equpment repairing work pwd schedule 174 c repairing of light point with 1.5 sq fr pvc insulated single core copper condutor multi strand cable in pvc conduit concealed as earth wir drawn inside pwd schedule 177 c repairing of celling fan+fresh air fan with 1.5 sq mm fr pvc insulated single core copper conductor multi strand cable in pvc condut concealed earth wir drawn inside pwd schedule 178 c repairing of plug point with 5 a flush type 3pin socket and 1.5 sq mm fr pvc insulated single core copper conductor multi strand cable in pvc conduit concealed as rarth wire drawn pwd schedule 121 c wiring point for light with 1.5 sq. mm. frlsh pvc insulated single core multistrand copper conductor cable as earthwire drawn inside the conduit and complete in all respect. pwd schedule 123 c wiring point for ceiling fan fresh air fan wall fan light with 1.5 sq. mm. frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduit and complete in all respect. pwd schedule 124 c wiring point for plug 5 amp with 1.5 sq. mm. frlsh pvc insulated multistrand copper conductor cable as earthwire drawn inside the conduit and complete in all respect. pwd schedule 131 c wiring point for light with 1.5 sq fr pvc insulated single core copper condutor multi strand cable in pvc conduit concealed as earth wir drawn inside. pwd schedule 133 c wiring point for celling fan+fresh air fan with 1.5 sq mm fr pvc insulated single core copper conductor multi strand cable in pvc condut concealed earth wir drawn inside and complete in all resepct. pwd schedule 134 c wiring point for 6 a plug with 1.5 sq mm fr pvc insulated single core copper conductor multi strand cable in pvc conduit concealed as earth wire drawn inside. pwd schedule 291 supply and wiring of sub main with 2 nos. 2.5 sq mm and with 1 no earth wire of 1.5 sq mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing pvc conduit complete. pwd schedule 291 a supply and wiring of sub main of 4 sq mm with 2 no. pvc insulated 1100 v grade single core copper conductor as earth wire 2 mm thick pwd schedule 211 c supply and wiring of sub main with 2 no. 4 sq. mm. 2 mm thick in 20 mm diameter heavy duty pvc conduit with 1 no. 2.5 sq. mm. multistrand copper conductor cable as earthwire drawn inside the conduit and complete in all respect. pwd schedule 212 c supply and wiring of sub main with 2 no. 6 sq. mm. 2 mm thick in 25 mm. diameter heavy duty pvc conduit with 1 no. 4 sq. mm. multistrand copper conductor cable as pwd schedule 216 c supply and wiring of sub main of 4 sq mm with 2 no. pvc insulated 1100 v grade single core copper conductor as earth wire 2 mm thick pwd schedule 217 c supply and wiring of sub main of 6 sq mm with 2 no. pvc insulated 1100 v grade single core copper conductor cable in 20 mm diameter with 4 sq mm single core copper conductor as earth wire 2 mm thick pwd schedule 218 c supply and wiring of sub main of 10 sq mm with 2 no. pvc of dia of conduit 25mm with 6 sq mm earth wire insulated 1100 v grade single core copper conductor as earth wire 2 mm thick pwd schedule 378 supply and fixing of 100 amp. 4 pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, tandp, painting and other material required for proper completion of the work pwd schedule 379 supply and fixing of 200 amp. 4 pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, tandp, painting and other material required for proper completion of the work pwd schedule 381 supply and fixing of 400 amp. four 4 change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, tandp, painting and other material required for proper completion of the work pwd schedule 501 a supply and laying of aluminium conductor 6 sq mm 2 core armored 1100 v grade 750 mm below of ground level. pwd schedule 501 k supply and laying of 35 sq. mm 3 1 2 core aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. pwd schedule 501 l same itme name of 50 sq. mm 3 1 2 core pwd schedule 501 m same itme name of 70 sq. mm 3 1 2 core pwd schedule 501 n same itme name of 95 sq. mm 3 1 2 core pwd schedule 501 o same itme name of 120 sq. mm 3 1 2 core pwd schedule 501 p same itme name of 150 sq. mm 3 1 2 core pwd schedule 501 q same itme name of 185 sq. mm 3 1 2 core pwd schedule 503 k supply and fixing of 35 sq mm brass nickle plated compression gland for pvc insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respect. pwd schedule 503 l same itme name of 50 sq. mm 3 1 2 core pwd schedule 503 m same itme name of 70 sq. mm 3 1 2 core pwd schedule 503 n same itme name of 95 sq. mm 3 1 2 core pwd schedule 503 o same itme name of 120 sq. mm 3 1 2 core pwd schedule 503 p same itme name of 150 sq. mm 3 1 2 core pwd schedule 503 q same itme name of 185 sq. mm 3 1 2 core pwd schedule 504 f supply and fixing of 35 sq mm plain or pin type copper tin plated cable socket lug to the cable leads, insulating with tape and making connection etc. complete in all respect pwd schedule 504 g same itme name of 50 sq. mm pwd schedule 504 h same itme name of 70 sq. mm pwd schedule 504 i same itme name of 95 sq. mm pwd schedule 504 j same itme name of 120 sq. mm pwd schedule 504 k same itme name of 150 sq. mm pwd schedule 504 l same itme name of 185 sq. mm pwd schedule 1021 cat a supply and fixing of 80 100 amp 4 pole mccb 25 ka thermal magnatic release and complete in all respect. pwd schedule 1021 c cat a supply and fixing of 100 amp 4 pole mccb 25 ka thermal magnatic release and complete in all respect. pwd schedule 1021 e cat a supply and fixing of 160 amp 4 pole mccb 25 ka thermal magnatic release and complete in all respect. pwd schedule 1021 f cat a supply and fixing of 200 amp 4 pole mccb 25 ka thermal magnetic release and complete in all respect. pwd schedule 1002 cat a supplay and fixing of 6 32 amp mcb 10 ka and complete in all respect. pwd schedule 1005 cat a supply and fixing of 40 amp dp isolator and complete in all respect. pwd schedule 1005 b cat b supply and fixing of 63 amp dp isolator and complete in all respect. pwd schedule 1022 a cat a supply and fixing of surface flush mounting 4 ways vertical spn distribution board with out additional metal door mcb complete in all respect. pwd schedule 1024 a cat a supply and fixing of surface flush mounting 8 ways vertical spn distribution board with out additional metal door mcb complete in all respect. pwd schedule 1025 a cat a supply and fixing of surface flush mounting 12 ways spn distribution board with additional metal door without mcb and complete in all respect. pwd schedule 1026 a cat b supply and fixing of surface flush mounting 4 ways tpn distribution board with additional metal door without mcb and complete in all respect. pwd schedule 1028 a cat b supply and fixing of surface flush mounting 8 ways tpn distribution board with additional metal door without mcb and complete in all respect. pwd schedule 1029 a cat b supply and fixing of surface flush mounting 12 ways tpn distribution board with additional metal door without mcb and complete in all respect. pwd schedule 1131 supply and fixing of fire extinguisher, abc type 4.00 kg capacity isi marked is 15683 and tac approved complete with initial charge and wall bracket, along with supply of all. pwd schedule 1132 supply and fixing of co2 type fire extinguisher 4.5 kg. capacity isi marked is 2878 and tac approved complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. pwd schedule 711 supply and fixing of horizontal air termination roof conductor of 25mm x 3mm copper strip on gi clamps on surface complete in all respect. for the connection of compresser and distribution pwd schedule 716 supply and laying of 25mm x 3mm g.i. strip from earth electrode directly in the ground as required complete in all respect. pwd schedule 727 a supply and fixing of safe earthing electrode t 19 copper coated length 2000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm terminal dia 12mm, coating 80 100 micron filled with crystalline condutive mixture ccm having anti conorsive and conductive with 50 kgs activated soil bfc capable of reducing the soil resistivity with good mixture of retaining capacity aloing with 30 cm square c.i frame with hinged cover and masonary hosuing pwd schedule 725 c supply and burring of safe earthing electrode t 39 hot dip galvanized , length 2000mm, outer pope 76mm inner dia 38mm, terminal dia 12mm, outer g.i pipe of 16 swg and inner g.i pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystlline conductive mixture ccm having anti corrosive and conductive property with 50 kgs activatred soil bfc capable of reducing the soil resistivity with good mixture of retaining capacity aloing with 30 cm square c.i frame with hinged cover and masonary hosuing pwd schedule 727 b supply and burring of safe earthing electrode t 19 cu copper coated, length 3000 mm, outer pipe 48.4mm x 3.2 mm, inner pipe 26.9mm x 2.6, terminal dia 12 mm, coating 80 100 micron filled with crystalline conductive mixture ccm having anti corrosive and conductive property with 50 kgs activated soil bfc pwd schedule 812 c ii cat b supply and installation of 200 amp capacity mccb type control panel indoor cubicle type dust and vermin proof floor mounting m.s. chanel base with bottom and top cable entries flectrial control panel with tpn mccb 4 pole 36 ka with thermal magnetic release switch and the instrument chamber etc complete in all respect the switches board shall be fabricated with crca sheet with a minimum, thickness of 1.6 mm 2mm cubicle type switch board shall be cat a and b, only incoming 200 amp 415 volt 4 pole mccb 1 no. outgoing 100 amp, mccb 1 no. 63 amp, mccb 3 no. pwd schedule 813 a ii cat b supply and installation of 400 amp mccb cubicle type control panel indoor cubicle type dust and vermin proof floor mounting m.s. chanel base with bottom and top cable entries flectrial control panel with tpn mccb 4 pole 36 ka with thermal magnetic relase switch and the instrument chamber etc complet in all respect the switches board shall be fabricated with crca sheet with a minimum, thickness of 1.6 mm 2mm cubicle type switch board shall be cat a and b, only and complete in all resepct. incoming 400 amp 415 volt 4 pole mccb 1 no. outgoing 200 amp, mccb 2 no., 100 amp mccb 1 no. and 63 amp mccb 1 no. pwd schedule 1031 cat b supplay and fixing of in enclosure surface flush mounting fitted with 20 amp 2 pin earth metal clad scraping earth in plug socket and complete in all respect. pwd schedule 1136 supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quilty and complete in all respect. pwd schedule 1139 a supply and fixing of power plug with 20 amp. 250 volt flush type modular switch and 5 pin 20 a 250 volt flush type universal modular socket switch on concealed m.s box including supply of all material, labour tandp etc. required for proper completion of work. pwd schedule 1203 a supply and fixing of electronic fan regulator 120 280 v isi marked on the existing switch board includng making and complete in all respect. pwd schedule 1301 c supply and wiring of sub main with two no. 2.5 sq mm fr pvc insulated 1100 v grade multistrand single core copper condutor cable in 20 mm dia meter with 1 no. with 1.5 sq earth wire. pwd schedule 1304 c supply and wiring of sub main with two no. 2.5 sq mm fr pvc insulated 1100 v grade multistrand single core copper condutor cable in 20 mm dia meter with 1 no. with 1.5 sq earth wire. pwd schedule 1403 a cat a supply and fixing of recess mounting round 12 15 watt led down lighter having powder coated die cast alluminium body with extended heat sink driver set complete in all respect. pwd schedule 1403 cat aa supply and fixing of 15 18 watt indoor recess mounting led square fitting for armstrong ceiling having powder coated die cast aluminium body with extended heat sink pwd schedule 1404 cat aaa supply and fixing of recess surface mounting round 24 32 watt led down lighter having powder coated die cast aluminium housing with extended heat sink, diffuser reflector and driver set completed in all respects. pwd schedule 1413 cat aa supply and fixing of led tube light with batten suitable for up to 1×22 watt led light complete including tube etc. of surface and complete in all respect. pwd schedule 1422 cat aaa supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 52 72 watt confirming to ip 66 and protction and complete in all respect. pwd schedule 1423 cat aaa supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 90 watt confirming to ip 66 and protction and complete in all respect. dgmhm 601 a supply and fixing of new sealed compressor windows ac dgmhm 601 b servicing air conditioner including leakage removing & repalcement of filter complete with gas charging including all material labour transportation windows ac dgmhm 601 c supply & replacement of relay of air conditioner windows ac dgmhm 601 d supply & replacement of starting capacitor windows ac dgmhm 601 e supply & replacement of running capacitor 80_120mfd windows ac dgmhm 601 f rewinding of exhaust fan of ac windows ac dgmhm 601 g supply & replacement of overload protector windows ac dgmhm 601 h cleaning of air conditioner by chemeical liquid windows ac dgmhm 601 i repair of pcb complete in all respect. windows ac dgmhm 602 a supply and fixing of new sealed compressor spilit ac dgmhm 602 b servicing air conditioner including leakage removing & repalcement of filter complete with gas charging including all material labour transportation spilit ac dgmhm 602 c supply & replacement of relay of air conditioner spilit ac dgmhm 602 d supply & replacement of starting capacitor spilit ac dgmhm 602 e supply & replacement of running capacitor 80_120mfd spilit ac dgmhm 602 f rewinding of exhaust fan of ac spilit ac dgmhm 602 g supply & replacement of overload protector spilit ac dgmhm 602 h cleaning of air conditioner by chemeical liquid spilit ac dgmhm 602 i supply & fixing of copper capillary 1_4 inch size spilit ac dgmhm 602 j supply & fixing of copper capillary 3_4 inch size spilit ac dgmhm 602 k repair of pcb complete in all respect. spilit ac dgmhm 603 a reparing_servicing of refrigerator including leakage removing replacement of filter with gas charging system willa all material labour transportaion dgmhm 603 b rewinding_overloading of sealed unit compressor of refrigerator complete with all material labour transportation dgmhm 603 c supply and replacement of relay of compressor dgmhm 603 d supply and replacement of thermostat switch dgmhm 603 h supply and replacement of door gasket dgmhm 603 i supply and replacement of new compressor sealed dgmhm 604 a s_f of new sealed compressor and complete in all respect. dgmhm 604 b servicing of water cooler including leakage removing & replacement of filter complete with gas charging including all dgmhm 604 c supply & replacement of relay of air conditioner dgmhm 604 d supply & replacment of starting capacitor dgmhm 604 e supply & replacement of running capacitor 80_120mfd. dgmhm 604 f rewinding of exhaust fan of air conditioner dgmhm 604 g supply & replacement of overload protector dgmhm 604 h cleaning of condenser by chemical liquid dgmhm 604 j repair of pcb and complete in all respect. dgmhm 801 a repair of room cooler including servicing of exhaust fan and pump with greasing etc. and leakage of perforated of water tank with soldering including replacment of perforated pipe nozzle complete dgmhm 801 b rewinding of 18 inch_20 inch exhaust stator coil complete with varnishing and baking etc. dgmhm 801 c rewinding of 24 inch exhaust stator coil complete with varnishing and baking dgmhm 801 d supply and replacement of bearing of 18 inch_20 exhaust fan dgmhm 801 e supply and replacement of ball bearing of 24 inch exhaust fan dgmhm 801 g supply and replacement of condenser 8mfd for 24 inch exhaust fan dgmhm 801 h rewinding of horizontal motor pump stator complete varnishing & leakage removing of pump dgmhm 801 l supply and filling of wood wool in cooler pads 3nos. including replacement of damage wire mesh netting & fixing of the same complete dgmhm 801 m supply and fixing of water lifting pump submersible type superior quality complete in all respect. dgmhm 802 b rewinding of 48 inch 56w ceiling _ wall fan stator coil complete with varnishing & backing etc. dgmhm 802 c supply and replacement of ball bearing for 48 inch_56 inch 60w ceiling_wall fan. dgmhm 901 a repair of iron bed including welding straitening_tightening of iron bed with repair of sheet etc. complete with in all respect. dgmhm 901 b repair of iron bed including replacement of heavy guage pipe legs cutting welding of required size with material etc. dgmhm 901 d supply & replacement of sheet type complete with welding labour t&p etc. dgmhm 901 g repair of hard bed with iron sheet minor repair dgmhm 901 h repair of sheet bed including replacement of damage pipe heavy gauge 7 repair of complete in respect. dgmhm 901 i repair fo hard bed with replacement of sheet patches & welding dgmhm 902 a repair of bed side locker including welding and replacement of kabza kundi_locker complete in all respect dgmhm 902 c supply & replacement of legs of locker with welding etc. dgmhm 903 b major repair of stretcher including replacement of complete full dgmhm 904 a supply of sheet heavy thickness complete with all respect labor etc. repair of strieture including replacement of conduit pipe heavy gauge complete with welding etc. dgmhm 904 b supply and replacement of castor wheel 6 inch diameter complete with dgmhm 904 c supply and replacement of castor wheel 4 inch diameter complete with dgmhm 909 a minor repair of instrument medicine dressing trolley including wilding with replacement of glass sheet of approx 30 x 18 dgmhm 909 b majour repair of instrument medicine dressing trolley complete with replacement of approx 30 inch18 inch dgmhm 910 a minor repair of instrument cabinet including welding and replacement of sheet patches_handle etc. pipe required dgmhm 910 b majour repair of instrument cabinet including glass with cutting and fixing etc. sheet patches_handle etc. pipe dgmhm 910 c supply and replacement or iron legs in instruments cabinet dgmhm 910 d supply and replacement of lock superior quality dgmhm 911 a repair of oxygen cylinder trolly including replacement of damage pipe_sheet_strip with welding etc. dgmhm 912 a minor repair of examination table including replacement of sheet patches pipe with welding etc. dgmhm 912 b major repair of examination table including replacement of full dgmhm 913 a minor repair of labor table including replacement of sheet patches pipe with welding etc. dgmhm 913 b majour repair of labor table including replacement of sheet patches pipe with welding etc. dgmhm 914 a minor repair of wheel chair including repair or foot rest with welding and oiling greasing of main wheel etc replacement of dgmhm 914 b majour repair of wheel chair replacement of main wheel with rubber and other repair work complete with all material dgmhm 916 repair of iron bench including replcement of sheet with pipe dgmhm 917 a repair of iron almira big size including replacement of damage sheet with welding etc. complete with all material dgmhm 917 c repair of iron almira small including replacement of damage sheet with welding etc. complete with all material dgmhm 917 d replacement of leg of iron almira big & small size dgmhm 918 repair iron table including replacement of pipe sheet repair of lock etc. complete with all material labor t&p etc. dgmhm 919 repair of iron chair includng replacement of sheet patches and angle iron with nut and bolt etc. dgmhm 920 repair of iron rack including replacement of sheet patches and angle iron with nut and bolt etc. with welding etc. dgmhm 1001 spray painting of operation table with two coats of synthetic enamel paint berger make are equivalent superior quality work include with complete scraping surface making smooth complete with all material laobor t&p etc. dgmhm 1004 spray painting of refrigerator 165 ltr with stand dgmhm 1005 spray painting of refrigerator full size with stand dgmhm 1006 spray painting of desert room cooler with 8 inch exhaust fan room cooler cabinet dgmhm 1007 spray painting of ceiling fan 1200mm size and complete with all dgmhm 1009 spray painting of water cooler. dgmhm 1010 spray painting of exhaust fan 18 inch size and complete with all dgmhm 1011 spray painting of iron bed with two coats of synthetic enamel paint berger make are equivalent superior quality work including with complete scraping surface making smooth complete with all material labour t&p etc. dgmhm 1012 spray painting of bed side locker dgmhm 1013 spray painting of instrument cabinet big dgmhm 1014 spray paiting of instrument cabinet small dgmhm 1017 spray painting of stretcher with trolley dgmhm 1019 spray painting of examination table dgmhm 1025 spray painting of iron almira big dgmhm 1026 spray painting of iron almira small dgmhm 1027 spray painting of iron rack dgmhm 1028 spray painting of iron table dgmhm 1033 spray painting of labour table dgmhm 1101 a i repair of 0.5 1.0kva voltage stabilizer including replacement of replay volt meter socket and repair of transformer coil etc with wire lead and 5 amp 3 pin top dgmhm 1101 a ii repair of 0.5 1.0 kva inverter including replacement of replay volt meter socket and repair of transformer coil etc with wire lead and 5 amp 3 pin top dgmhm 1101 b i repair of 4 kva 5kva voltage stabilizer including replacement of replay and electrical circuit volt meter socket and repair of transformer complete with wire lead 3 core copper 40_0076 approx 4mtr with 3 pin dgmhm 1101 a iii repair of 4 5 kva inverter including replacement of replay volt meter soket and repair of transformer coil etc with wire lead and 5 ampt 3 pin top dgmhm 1101 c iii supply and replecement of ups battery of 12 volt dgmhm 1101 b iii repair of 1 kva 5kva ups including of replay volt mete socet and repair of transformer coil etc with wire lead and 3 core copper 400076 approx 4 meter with 3 pin top dgmhm 1101a repair of 1_0.5 kva invertor including replacement of replay volt meter socket and repair of transformer coil etc. with wire lead and 5 amp. 3 pin top dgmhm 1101b repair of 4_5 kva invertor including replacement of replay and electrical circuit volt meter socket and repair of transformer complete with wire lead 3 core copper 40_0076 approx. 4mtr with 3 pin top dgmhm 1101a repair of 250 va 1 kva ups including replacement of replay volt meter socket and repair of transformer coil etc. with wire lead and 5 amp. 3 pin top dgmhm 1101b repair of 1 kva 5 kva ups including replacement of replay and electrical circuit volt meter socket and repair of transformer complete with wire lead 3 core copper 40_0076 approx. 4mtr with 3 pin top dgmhm 1101c supply & replacement of ups battery dgmhm 1201a complete servicing of 5 10 kva genset engine including with change of oil oil filter fuel filter etc. complete in all respect dgmhm 1201b complete servicing of 15 35 kva genset engine including with change of oil oil filter fuel filter etc. complete in all respect dgmhm 1201c complete servicing of 50 75 kva genset engine including with change of oil oil filter fuel filter etc. complete in all respect dgmhm 1201d complete servicing of 125 320 kva genset engine including with change of oil oil filter fuel filter etc. complete in all respect dgmhm 1202a rewinding of alternator of 5 10 kva generator with servicing oiling greasing change of carbon brush etc. complete in all respect dgmhm 1202b rewinding of alternator of 15 35 kva generator with servicing oiling greasing change of carbon brush etc. complete in all respect dgmhm 1202c rewinding of alternator of 50 75 kva generator with servicing oiling greasing change of carbon brush etc. complete in all respect dgmhm 1202d rewinding of alternator of 125 320 kva generator with servicing oiling greasing change of carbon brush etc. complete in all respect dgmhm 1301a rewinding of submersible motor of 1 hp with change of bush repair & polishing of motor rotor change of sand guard rotor sleeve c.t. bearing thrust bearing etc. complete in all respect dgmhm 1301b rewinding of submersible motor of 2 5 hp with change of bush repair & polishing of motor rotor change of sand guard rotor sleeve c.t. bearing thrust bearing etc. complete in all respect dgmhm 1301c rewinding of submersible motor of 7.5 10 hp with change of bush repair & polishing of motor rotor change of sand guard rotor sleeve c.t. bearing thrust bearing etc. complete in all respect dgmhm 1301d rewinding of submersible motor of 15 20 hp with change of bush repair & polishing of motor rotor change of sand guard rotor sleeve c.t. bearing thrust bearing etc. complete in all respect dgmhm 1301e rewinding of submersible motor of 25 hp and above with change of bush repair & polishing of motor rotor change of sand guard rotor sleeve c.t. bearing thrust bearing etc. complete in all respect dgmhm 1302a repair of submersible pump up to 1 hp with change of bearing sleeve bowl compeller packing rubber ring non return valve etc. complete in all respect dgmhm 1302b repair of submersible pump up to 2 5 hp with change of bearing sleeve bowl compeller packing rubber ring non return valve etc. complete in all respect dgmhm 1302c repair of submersible pump up to 7.5 10 hp with change of bearing sleeve bowl compeller packing rubber ring non return valve etc. complete in all respect dgmhm 1302d repair of submersible pump up to 15 20 hp with change of bearing sleeve bowl compeller packing rubber ring non return valve etc. complete in all respect dgmhm 1302e repair of submersible pump up to 20 hp and above with change of bearing sleeve bowl compeller packing rubber ring non return valve etc. complete in all respect total quantity : 200...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39902494 work under additional business plan in sub division second under ee, edd, barabanki. 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole 8.5 3 stp pole 11 mtr long 4 11kv pin insulator . 5 11kv disc insulator . 6 top channel 11 kv 7 t off channel 11 kv 8 11kv x arm 9 ms earthing rod 10 transformer 250 kva 11 abc cable 3x95 sq. mm. 12 acsr weasal conductor 13 stay set complete 14 other line material 15 dragging of pole from je dump store to site 16 concreating and pilinthing of st& pccpole 18x24 cm. 17 erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 swg, nuzzling & grouting. 18 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 19 erectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33/11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 kv pin & pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 20 erectionof singlepcc /st pole for stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 21 earthing of pole with ms earthing. 22 stringing and sagging of lt 3x95 abc cable (lt abc cable will be provided by the department) 23 pipe earthing ( boring type) 24 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l pieces, providing crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor) 25 mounting of 250 kva tranformer 26 providingof various type materials. all materials shall be supplied by the contractor. 27 nut & bolt 28 11 kv do fuse set. 29 clamp for top/ dropper and t off channel etc. 30 different size of lug 31 copper l piece 250/400/630 kva 32 fixing of various type materials. all t& p and labour will be provided by the contractor. 33 nut & bolt 34 11 kv do fuse set. 35 clamp for top/ dropper and t off channel etc. 36 different size of lug 37 copper l piece 250/400/630 kva 38 wiremessfencing of 11/0.4 kvs/s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mess. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of theframe as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e/i 39 construction of t/f plinth of size 2x2x1.5 mtr with first class brick and massionary work in the ratio 1:4 cement and core sand with rcc top 20 mm 1:2:2cement sand & core sand stone grit with 20 mm ms bar and ms channel for resting of t/f. 40 earthing of t/f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia (40 fit gi pipe) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 41 other line work ...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39902479 work under system augmentation plan in sub division first under ee, edd, barabanki. 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc / st pole 3 11kv pin insulator . 4 11kv disc insulator . 5 top channel 11 kv 6 t off channel 11 kv 7 11kv x arm 8 ms earthing rod 9 transformer 100kva 10 transformer 400kva 11 ltcable al 1x240 sq mm 12 ltcable al 1x400 sq mm 13 ltcable al 1x630 sq mm 14 acsr rabbit conductor 15 11 kv 3*185 sq mm xlpe cable 16 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 17 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 18 stay set complete 19 other line material 20 dragging of pole from je dump store to work site 21 concreating and pilinthing of st& pccpole 18x24 cm. 22 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7 / 8 swg, nuzzling & grouting. 23 stringing and sagging of 11 kv line with acsr rabbit conductor including nuzzling binding and jumpering ( rabbit conductor will be provided by the department ) 24 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33 / 11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33 / 11 kv pin & pin insulator. 1 / 6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 25 errectionof singlepcc / st pole for stringing and sagging of conductor 1 / 6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 26 earthing of pole with ms earthing. 27 fabricate with hole suitable size in steel items, receive from central store lightas top channel / dropper channel sub station base angle etc. 28 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l pieces, provinding crimping type aluminium lugs of required size. ( all the material except transformer will be arranged by the contractor ) 29 mounting of 100 kva tranformer and its connection complete 30 mounting of 400 kva tranformerits connection complete 31 provindingof various type materials. all materials shall be supplied by the contractor. 32 nut & bolt off sizes 33 11 kv do fuse set. 34 11 kv tpmo set complete 35 clamp for top / dropper and t off channel etc. 36 different size of lug 120 / 240 / 400 / 630 / 1000 sq mm 37 copper lug 120 mm 38 copper l piece 250 / 400 / 630 kva 39 lt xlpe cable 3.5x240 sq mm. 40 copper controlwire 6mm wire 41 copper control cable 2mm 4 wire 42 copper control cable 4mm 4 wire 43 copper control cable 6mm 4 wire 44 copper control cable trey 3.5x50 sq mm 45 ltxlpe cable al 1x240 sq mm 46 ltxlpecable al 1x400 sq mm 47 ltxlpecable al 1x630 sq mm 48 construction of masonry type distribution pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and ms round bar of 10 mm dia including supply and mounting of 02 nos. straight ms angle 50x50x6x750 mm 2 / 3 nos., henely type tailless fuse units 500 amps. 650 volts one no. for incoming and other for outgoing, al bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 swg bp sheet. all material will be supplied by the contractor 49 fixing of various type materials. all t& p and labour will be provided by the contractor. 50 nut & bolt 51 11 kv do fuse set. 52 11 kv tpmo set 53 clamp for top / dropper and t off channel etc. 54 different size of lug 55 copper lug 120 mm 56 copper l piece 250 / 400 / 630 kva 57 lt xlpe cable 3.5x240 sq mm. 58 copper controlwire 6mm wire 59 copper control cable 2mm 4 wire 60 copper control cable 4mm 4 wire 61 copper control cable 6mm 4 wire 62 copper control cable trey 3.5x50 sq mm 63 ltxlpe cable al 1x240 sq mm 64 ltxlpecable al 1x400 sq mm 65 ltxlpecable al 1x630 sq mm 66 installation of 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 67 installation of 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 68 ltcable al 1x240 sq mm 69 ltcable al 1x400 sq mm 70 ltcable al 1x630 sq mm 71 wiremessfencing of 11 / 0.4 kvs / s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mess. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of theframe as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e / i 72 repairing of wiremessfencing of 11 / 0.4 kvs / s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. horizontal runner of ms flat 40x5 wherever required welded in middle to support of wire mess. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess as per actual requirement shall be welded all along the periphery of theframe with proper grouting & plinthing of angle support as per respo specification & direction of e / i 73 construction of t / f plinth of size 2x2x1.5 mtr with first class brick and massionary work in the ratio 1:4 cement and core sand with rcc top 20 mm 1:2:2cement sand & core sand stone grit with 20 mm ms bar and ms channel for resting of t / f. all material will be provided by the contrator 74 earthing of t / f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia ( 60 fit gi pipe ) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 75 testing of control pannel 76 dismentaling of 63 / 100 / 250 kva t / f & carriage site to store 77 dismentaling& shifting of 250 kvat / f 78 laying of 11 kv 3*185 sq mm xlpe cable by open trenching as per resspo 79 other line work...

Department Of Food And Civil Supplies - Uttar Pradesh

39902390 transport work of custom milled rice (cmr) for annapurna rice mill in district shravasti , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39902385 transport of cmr for rajpoot rice mill in district gonda , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39902379 work under system augmentation plan in sub division second under ee, edd, barabanki. 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole 8.5 3 stp pole 11 mtr long 4 top channel 11 kv 5 t off channel 11 kv 6 ms earthing rod 7 transformer 250 kva 8 transformer 400kva 9 abc cable 3x95 sq. mm. 10 ltcable al 1x240 sq mm 11 acsr weasal conductor 12 stay set complete 13 other line material 14 dragging of pole from je dump store to site 15 concreating and pilinthing of st& pccpole 18x24 cm. 16 erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 swg, nuzzling & grouting. 17 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 18 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33/11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 kv pin & pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 19 installation of d.b. box 20 earthing of pole with ms earthing. 21 stringing and sagging of lt 3x95 abc cable (lt abc cable will be provided by the department) 22 pipe earthing ( boring type) 23 fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 24 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l pieces, provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor) 25 munting of 250 kva tranformer 26 munting of 400 kva tranformer 27 provindingof various type materials. all materials shall be supplied by the contractor. 28 nut & bolt 29 11 kv do fuse set. 30 tpmo set 31 clamp for top/ dropper and t off channel etc. 32 dead end clamp with j hook 33 suspension clamp 34 peircing connectores /clamp 35 pole clamp 36 l t clamp with nut &bolt 37 l t insulator 38 different size of lug 39 copper lug 120 mm 40 copper l piece 250/400/630 kva 41 lt tainless fuse set 300amp 42 lt xlpe cable 1x400 mm 1wire 43 copper controlwire 6mm 4wire 44 copper control cable 2.2.5 sq mm 45 copper control cable 4.2.5 sq mm 46 copper control cable 6.2.5 sq mm 47 copper control cable trey 3.5x50 sq mm 48 lt distribution pannel massionary type 440v 49 fixing of various type materials. all t& p and labour will be provided by the contractor. 50 nut & bolt 51 11 kv do fuse set. 52 tpmo set 53 clamp for top/ dropper and t off channel etc. 54 dead end clamp with j hook 55 suspension clamp 56 peircing connectores /clamp 57 pole clamp 58 l t clamp with nut &bolt 59 l t insulator 60 different size of lug 61 copper lug 120 mm 62 copper l piece 250/400/630 kva 63 lt tainless fuse set 300amp 64 lt xlpe cable 1x400 mm 1wire 65 copper controlwire 6mm 4wire 66 copper control cable 2.2.5 sq mm 67 copper control cable 4.2.5 sq mm 68 copper control cable 6.2.5 sq mm 69 copper control cable trey 3.5x50 sq mm 70 lt distribution pannel massionary type 440v 71 lt xlpe cable 1x240 mm 1wire 72 wiremessfencing of 11/0.4 kvs/s shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. horizontal runner of ms flat 40x5 welded in middle to support of wire mess. rectangular welded type wire mess of size 50x25 made of 12 s.w.g. wire mess shall be welded all along the periphery of theframe as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. diagonal bracing of all the frame panel will be welded with ms flat of size 25x3mm to support as per respo specification & direction of e/i 73 construction of t/f plinth of size 2x2x1.5 mtr with first class brick and massionary work in the ratio 1:4 cement and core sand with rcc top 20 mm 1:2:2cement sand & core sand stone grit with 20 mm ms bar and ms channel for resting of t/f. 74 earthing of t/f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia (60 fit gi pipe) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 75 dismentaling of 63/100/250 kva t/f & carriage site to store 76 dismentaling& shifting of 250 kvat/f 77 other line work ...

Madhyanchal Vidut Vitran Nigam Limited - Uttar Pradesh

39902373 work under system augmentation plan in sub division third under ee, edd, barabanki. 1 safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work. 2 pcc pole 8.5 3 11kv pin insulator . 4 11kv disc insulator . 5 11kv x arm 6 transformer 100kva 7 abc cable 3x95 sq. mm. 8 ltcable al 1x240 sq mm 9 acsr weasal conductor 10 lt d.b. box 11 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 12 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 13 stay set complete 14 other line material 15 dragging of pole from je dump store to site 16 concreating and pilinthing of st& pccpole 18x24 cm. 17 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7 / 8 swg, nuzzling & grouting. 18 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering ( weasal conductor will be provided by the department ) 19 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33 / 11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33 / 11 kv pin & pin insulator. 1 / 6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 20 errectionof singlepcc / st pole for stringing and sagging of conductor 1 / 6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 21 installation of d.b. box 22 stringing and sagging of lt 3x95 abc cable ( lt abc cable will be provided by the department ) 23 pipe earthing ( boring type ) 24 fabricate with hole suitable size in steel items, receive from central store lightas top channel / dropper channel sub station base angle etc. 25 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l pieces, provinding crimping type aluminium lugs of required size. ( all the material except transformer will be arranged by the contractor ) 26 munting of 250 kva tranformer 27 provindingof various type materials. all materials shall be supplied by the contractor. 28 nut & bolt 29 clamp for top / dropper and t off channel etc. 30 different size of lug 31 copper l piece 250 / 400 / 630 kva 32 lt tainless fuse set 300amp 33 lt xlpe cable 1x120 mm 1wire 34 lt xlpe cable 1x400 mm 1wire 35 copper control cable 2.2.5 sq mm 36 ltcable al 1x400 sq mm 37 fixing of various type materials. all t& p and labour will be provided by the contractor. 38 nut & bolt 39 clamp for top / dropper and t off channel etc. 40 installation of 11 kv vcb panel outgoing ctr 200 / 100 / 5 a, 350 mva 41 installation of 11 kv vcb incomming ctr 600 / 300 / 5 a, 350 mva 24 volt. 42 ltcable al 1x400 sq mm 43 earthing of t / f pipe type with 40 fit deep borring and providing gi pipe 1.5 dia ( 60 fit gi pipe ) and gi strip 25x5 mmx6 meter long attached with clamps, l piece, nut & bolts and gi pipe cap. all material shall be supplied by the contractor. 44 testing of control pannel 45 other line work...

Department Of Food And Civil Supplies - Uttar Pradesh

39902327 transport work of custom milled rice (cmr) for mangal rice mill in district gonda , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39902268 transport work of custom milled rice (cmr) for amit traders rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39902121 transport work of custom milled rice (cmr) for shyam sakha food and beverages pvt ltd rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39902033 transport work of custom milled rice (cmr) for beri agro industries rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b)ci bend 22.5° (250mm dia) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess (+) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39902027 transport work of custom milled rice ( cmr ) for bala ji rice and dal mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39901997 works at proposed construction of new switchyard for shifting of 33 / 11kv substation pahasu, bulandshahr switchyard due to low land level & rain water logging problem in existing switchyard. under edd khurja, bulandshahr. 1 supply of following material terminal gantry galvanized structure as per specification 2 main bus bar complete with dog conductor with g.i.structure as per resspo drawing. 3 line isolator 800a, 33kv 4 bus isolator 800a, 33kv 5 galvanized structure for 33 kv isolator with plinth & foundation as per specification 6 33kv post insulator 7 galvanized structure for 33 kv post insulator with plinth & foundation as per specification 8 33kv lightening arrester with surge counter. 9 galvanized structure for 33 kv lightening arrester with plinth & foundation as per specification 10 33kv fuse set 11 galvanized structure for 33 kv fuse set with plinth & foundation as per specification 12 copper bus bar 2500x50x6mm 13 galvanized structure for cu bus bar 14 power transformer neutral g.i. l type stand of size 100x50x6mm channel with copper bound as per specification 15 g.i. cable support structure of size 65x65x6mm angle as per specification 16 90 lbs rail pieces for t / f ( 44.64kg / mtrs. ) 17 24 volt battery set 18 24 volt battery charger 19 11kv cable j / kit outdoor type for 3x300mm xlpe cable. 20 11kv cable j / kit indoor type for 3x300mm xlpe cable. 21 cable box o / d 33kv 3x300 xlpe 22 providing of armoured control cable4x2.5 mm sq. armoured control cable 23 2x2.5 mm sq. armoured control cable 24 earthing of substation outdoor equipment earthing ( earth mat ) ( m.s.round 32mm dia 4500 kgs ) 25 indoor equipment 26 fire fighting equipment of approved make4.5 kg co2 fire extinguisher portable type. 27 5 kg dry chemical power fire extinguisher portable type. 28 fire bucket stand with 6 nos. bucket 29 rubber mat 1mtrx2mtr thikness 20mm, 30 heat shrinkable outdoor type end termination cable jointing kit suitable for 11kv xlpe 3x185sq.mm. cable 31 heat shrinkable indoor type end termination cable jointing kit suitable for 11kv xlpe 3x185sq.mm. cable 32 g.i. channel 100x50x6 mm, 2400 mm long ( 9.56kg / mt ) with g.i.clamp of 65x8mm for dropper channel of 33kv line double pole / four pole 33 g.i.channel 100x50x6x2028mm ( 9.56kg / mt ) with 2 nos. g.i.clamp of 65x8mmfor dropper for fuse set & double pole 34 g.i. top channel 125x65x6 mm, 2240 mm long ( 13.10kg / mt ) with 2 nos. g.i.clamp of 65x8mm for s / s transformer double pole 35 copper l piece of size 400x50x6 mm for lt bushing rod of transformer 36 holding clamps for top channel tpmo & fuse set etc. with bolts & nuts 37 11kv tpmo ( as per specification ) 38 11kv fuse set 39 11 kv lightning arrestor 40 transformer earthing complete ( chemical pipe earthing as per specification ) 41 g.i. barbed wire 42 stay rod complete ( saty rod 16x1800mm, stay wire 5kg, stay clamp bolt & nut with grouting ) . 43 earthing of pole by ms earthing rod of 20x2500 mm. and 6 swg earthing wire etc. 44 al. crimping lugs 35 sq.mm. 45 al. crimping lugs 50 sq mm. 46 al. crimping lugs 70 sq.mm. 47 heat shrinkable jointing kit suitable for 11kv xlpe 3x35 sq.mm. cable sizeoutdoor termination kit 48 indoor termination kit 49 carriage of following material from pvvnl store 33kv vcb with double t / f control panel and ct 400 / 200 / 1a with structure.i ) 33kv vcbii ) control panel i / c for 33kv double t / fiii ) ct 400 / 200 / 1 1aiv ) steel structure 50 33kv pt ratio 33kv / 110v 51 11kv switchgear600 / 300 / 5a, 350mva, i / c 52 outgoing 200 / 100 / 5a 350mva 53 11kv bus couplar 350mva 54 11kv xlpe cable 3x300mm² 55 cable h.t.xlpe 33kv 3x300sq.m.m 56 acsr dog conductor for bay & jumpering. 57 11kv xlpe cable 3x185mm2 for feeders. 58 lt aluminium xlpe insulated cable of size 1x50 sq.mm. ( for ht jumpering ) 59 lt aluminium xlpe insulated armoured cable of size 3.5x70 sqmm. 60 11 kv aluminium xlpe cable 3x35 sq. mm. 61 stp sp 55 11m long 62 pcc poles, 9 m long 63 disc insulator polymeric type 70kn 64 disc fitting b&s type 70kn 65 11kv composite polymeric pin insulator. 66 erection of following material & miscellaneous electrical works.terminal gantry:fabrication with cutting, straightening & drilling of holes in joist / angle, fixing members of m.s.angle, by electric welding. 67 excavation of earth 2x ( 1.40x0.9x2.20 ) 68 erection of gantry in proper alignment, two pillers. 69 grouting in cc ratio 1:3:6, size 2x ( 1.40x0.9x2.20 ) +2x ( 1.40x0.75x0.30 ) 70 12mm thick plastering on plinth in ratio 1:4 of size 2x ( 1.40x0.30 ) x2+2x ( 0.75x0.30 ) x2+1x ( 1.40x0.75 ) x2 71 supply & fixing of stone pad 72 bus bar gantry:fabrication of bus bar gantry on m.s.rail 90lbs / 150x150mm r.s.joist including straightening, drilling of holes & fixing top droper and bracing of m.s.angle / channel, as per drawing. 73 excavation of earth 2x ( 0.75x0.75x1.20 ) x2 74 erection of bus bar gantry of m.s. rail 90lbs / 150x150mm r.s.joist in proper alignment. 75 grouting and making plinth in c.c. ratio 1:3:6 in size 2x ( 0.75x0.75x1.20 ) x2 + 2x ( 0.75x0.75x0.30 ) x2 76 12mm thick plastering on plinth in ratio 1:4 of size 4x ( 0.75x0.30 ) x4+2x ( 0.75x0.75 ) x2 77 supply & fixing of stone pad 78 line / bus isolator structure: ( 3nos. ) fabrication of structure, including cutting, straightening & drilling of holes in channel / angle. 79 excavation of earth 2x ( 1.10x0.60x1.0 ) x3 80 erection of line / bus isolator structure in proper alighment. 81 grouting of structure in c.c. ratio 1:4:8 in size 2x ( 1.10x0.60x1.00 ) x3 82 making plinth by c.c. ratio 1:3:6, in size 2x ( 1.10x0.60x0.30 ) x3 83 12mm thick plastering on plinth in ratio 1:4 of size 4x ( 1.10x0.30 ) x3+4x ( 0.60x0.30 ) x3+2x ( 1.10x0.60 ) x3 84 supply & fixing of stone pad. 85 fuse set / l.a. / p.t / post insulator structures ( 2+2+1+2 ) :fabrication of structure, including cutting, straightening & drilling of holes in channel / angle / joists. m.s.plate to be fixed on structure of required size. 86 excavation of earth in size 2x ( 0.90x0.50x1.00 ) x3+2x ( 0.45x0.45x1.00 ) x4 87 erection of above structure. 88 grouting by c.c. in ratio 1:4:8, 2x ( 0.90x0.50x1.00 ) x3+2x ( 0.45x0.45x1.00 ) x4 89 making plinth by c.c. ratio 1:3:6, in size 2x ( 0.90x0.45x0.30 ) x3+2x ( 0.45x0.45x0.30 ) x4 90 12mm thick plastering on plinth in ratio 1:4 of size 6x ( 0.90x0.30 ) x2+6x ( 0.50x0.30 ) x2+2x ( 0.90x0.50 ) x3+2x ( 0.45x0.30 ) x8 + 2x ( 0.45x0.30 ) x8+2x ( 0.45x0.45 ) x4 91 supply & fixing of stone pad. 92 plinth for 10 mva transformerconstruction of plinth for 10 mva, 33 / 11 kv transformer of ( 3.46x3.46x1.0 ) m ( 0.50m below ground level and 0.5 m above ground level ) as per details & drawing attached ( all required matrials provided / supply by the contractor own his cost ) : excavation of earth in foundation. 93 cement concrete in foundation in ratio 1:6:12, cement, sand & brick ballast. 94 first class brick work in ratio 1:4 with cement & coarse sand mortar. 95 cement concreting inner side of plinth in ratio 1:4:8, cement, coarse sand and stone shingle. 96 m.s.work for re inforcement 12mm. tor at a distance of 15cms. apart, including cutting, bending & binding by wire to each other for making jal in two layer, 12 to 15cms. apart. m.s.12mm tor bar provided by the contractor his own cost. 97 fixing of 4mtr.long, 2no. rail pices, 90lbs, on top of plinth at proper distance in alignment by c.c. 98 cement concrete in ratio 1:2:4, cement, coarse sand & stone shingle, on top of the plinth, including fixing of m.s.tor jal. 99 12mm.thick cement plaster in ratio 1:4, cement & sand mortar, on all side of plinth. 100 neat cement coating 3mm.thick on top surface of plinth. 101 plinth for 33 kv v.c.b.construction of plinth for the structure of 33 kv vcb & c.t.’s as per details for 02 no. ( all required materials provided / supply by the contractor own his cost ) : excavation of earth of size 2x ( 2.0x2.0x1.0 ) m pits for construction of plinth. 102 brick ballast ratio ( 1:4:8 ) ( cement, sand & brick ballast ) for foundation work 2x ( 2.0x2.0x0.5 ) m plinth. 103 r.c.c. work in ratio 1:2:4 ( cement, coarse sand & stone grit ) of 20m size for making plinth of size 2x ( 2.0x2.0x1.0 ) m and grouting of foundation bolts 04 nos. for 33 kv vcb. 104 12mm thick plaster with cement mortar in ratio 1:4 ( cement & fine sand ) of plinth of 0.4m upper side 105 earthing of outdoor equipments in switchyard, details as given below: digging of trench of size 0.50x0.75x330m., for laying of earth mat throughout in switchyard and re filling &ramming of the same earth in the to the trenches after completion of earth mat work. 106 laying of 32mm.dia m.s.bar in trench, properly in alignment along the length and width in switchyard. 107 cutting of 32mm.dia m.s.bar 3m.long and making one end in conical shape, by forging process and driving it into the earth, in trench at fixed distance as per drawing and properly welding with m.s.bar earthmat. 108 proper continuous electric welding of overlap joints of m.s.bar upto a length of 150mm. on both sides, along the length of m.s.bar and an extra piece of 12mm m.s.round 150mm.long, providing on both sides of overlap joints and continuous electric welding on both side, along the length of m.s.bar. all joints shall be painted with black bituminous paint. 109 proper electric welding at x joints of m.s.bar and welding by providing 25x6mm.”u” type clamp of m.s.flat, and proper continuous electric welding with m.s.electrode and m.s.bar at each x joints. all joints shall be painted with black bituminous paint. 110 providing & laying of g.i.strip of size 40x6mm for connecting the earthmat with each equipment ( terminal gantry, bus gantry, bus isolators, line isolator, 33kv c.t., 33kv v.c.b., l.as., fuse set, post insulators, t / f body & its neutral and m.s.frame of cable supporting structure ) , various steel structures. the work also includes cutting, bendidng, straightening, over laping and welding the earth strip with earth mat and by using high quality arc welding in already digged trenches. 111 painting of earth strip of size ( 50x6 ) mm with one coat of ready mixed primer with two coats of isi mark synthetic channel green paint. 112 earthing of indoor equipment, details as given below: cutting of 32mm.dia m.s. bar 3mtr.long and making one end in conical shape by forging process and driving it into the earth at each corner of bridge outside control room and proper welding with m.s.bars. 113 digging of pits for making bridge on both side of control room by laying 32mm. dia m.s.round in rectangular shape. electric welding on cross joints by providing “u” clamp in size 25x6mm. of m.s.flat and inter connecting both by m.s.round 32mm.dia through control room trench, with over lap joint by providing m.s.round 12mm dia, on both sides of over lap joints of m.s.round, by electric welding. all joints shall be painted with black bituminious paint. 114 water level earthing by boring and lowering of g.i. pipe size 40 mm dia & thickness 3mm into the ground at 20 mtr depth or upto the water level with the lower end of solid copper cone approx 225 mm long and 750 gm in weight shall be provided and screwed in pipe as well as bringing out a continuous copper wire 6 swg from the cone up to the ground surface where it will be bolted to the g.i. earth strip for transformer neutral connection, the g.i.earth strip size 50x6mm will be welded to the g.i. pipe and neutral earthing support & other installed equipment in switchyard. all required material provided / supply by the contractor own his cost. 115 construction of control cable trench in switchyard, as per details ( length 40mtr. ) :excavation of earth in size 0.750x0.40m. 116 c.c.work in foundation in ratio 1:4:8 ( cement, sand & brick ballast ) with proper ramming in size 0.750x0.15m. 117 ist class brick work in cement mortar in ratio 1:4 in size 0.23x0.35m. 118 25mm thick c.c. in floor of cable trench in ratio 1:2:4 ( cement, coursend and stone grift ) 20mm guage in size 0.3m width. 119 providing & grouting of m.s.strip of size 450x25x6mm in cable trench 100mm above floor level and at equal space distance 300mm 120 providing & grouting of m.s.angle iron of size 50x50x6mm in upper edge of trench. 121 c.c.work on the top in the ratio 1:2:4 in the grouting of edge of the trenches. 2x ( 40x0.23x0.06 ) 122 plastering of trench in cement, mortar in ratio 1:4, 12mm thick in cable trench. 123 fabrication and fixing cable trench cover of m.s.angle iron size 50x50x6mm of size 0.3m wide 0.5 to 1.0 mtr length with proper welding of 8mm size of bar 2nos. in length and 6nos. in width. work will be include providing of all required civil material & all fabrication material ( m.s.angle 50x50x6mm ) 0.5 mtr long 124 1.00 mtr long 125 removal of existing 10mva transformer and other accessories equipments.disconnecting ht cable connection from 33kv side &11kv side of 10mva power transformer for removing power transformer from plinth after proper shutdown. dismantling of 11kv cable support structure, copper bus bar structure, m.s.frame etc. 126 disconnecting copper flexible / earthing strip from power transformer neutral & dismantling neutral earthing systemto facilitate removal of power transformer from plinth. 127 disconnecting earthing strip from body of 10mva power transformer. 128 draining of transformer oil from conservator, radiators of existing 10 mva t / f, at 33 / 11 kv s / s pahasu, bsr into the dry & clean drums and stacking at the safe place in substation outside of switchyard. empty drums shall be provided bycontractor 129 removal of conservator, radiators and other accessories from existing 10 mva power transformer. 130 safe shifting of 10 mva power transformer main body and other accessories from the substation switchyard to outside the switchyard at new constructedplinth ofnew switchyard. 131 re assembling of conservator, radiators and other accessories to existing 10 mva power transformer. 132 re filling the transformer oil ( old & used in existing 10mva t / f ) 133 fabrication and erection of neutral earthing l type support made of g.i. channel size 100x50mm. structure shall be 4 mtr. long with 1 mtr. arms.structure shall be grouted in ratio 1:3:6 in block size 300x300x700mm and painted of welding joint with one coat of ready mixed primer and two coat of enamel aluminium paint work includes connecting neutral bushing rod of power transformer and g.i. earthing strip with the help of flexible copper bond, g.i. bolt and washer. 134 fabrication and erection of cable support made of two pieces of g.i. angle ( 65x65x6 ) mm, 2.75 meter long, joined to each other by means of 5 nos. g.i. flat ( 50x6 ) mm pieces of size 750 mm long each by welding at equal intervals and grouting in a block of size ( 300x300x700 ) mm in c.c. 1:3:6 ( cement, coarse sand and stone ballast ) complete and painted of welding joint with one coat of ready mixed primer and two coat of enamel aluminium paint. work includes providing of three nos. g.i. clamps made of ( 50x6 ) mm g.i. flat for holding the cable including nuts and bolts. 135 fabrication and grouting of g.i. frames 3.60 mt. long for support of copper bus bar. bus bar will be provided in l.v. side of power transformer. the g.i. frame shall be made of g.i. channel ( 100x50 ) mm in ‘t’ shape. providing 2 nos. support of g.i. angle iron ( 50x50x6 ) mm, 0.60mt. long below the top channel, drilling of 3 nos. hole on the top channel for fixing of 11 kv pin insulator and painted of welding joint with one coat of ready mixed primer and two coat of enamel aluminium paint and grouting the frame in c.c. ratio 1:3:6 ( cement, coarse sand and stone ballast ) in a block of size ( 300x300x700 ) mm. the work also includes the fixing of 3 nos. 11 kv pin insulator with pin and binding the copper bus bar with the pin insulator by aluminium binding wire in complete. 136 providing & fabrication of copper bus bar of size ( 2500x50x6 ) mm in l.v. side of 10mva 33 / 11 kv, power transformer, work includes connection of outside bus bar in l.v. side busing rod of power transformer and other side with outdoor 11 kv cable box as well as providing empire tape and h.t. tape etc. for proper insulation work. 137 installation of 11 kv switchgears in control room carefully & safely shifting of 11 kv switchgear panels from outside to inside the switch gear room grouting foundation of bolts in c.c. ratio of 1:2:4 ( including cutting of rcc floor and finishing of rcc floor ) as per requirement placing, aligning and fixing of 11 kv anchor gi bolts and nuts of proper size for completion of work in all respect. 138 safely mounting of 11 kv pt on 11 kv incoming switch gear filling of oil ( if required ) making all electrical connections and testing & commissioning of work. 139 proper fixing and making bus bar connection in between two switch gears after proper cleaning. work also include proper insulation, taping by empire, pvc and h.t. tape etc. 140 earthing of 11 kv switch gears:earthing of 11kv switchgears by means of g.i. earth strips ( 50x6 ) mm connecting to 4 nos. earthing electrodes of 32 mm dia. ( including fabrications of earthing electrodes ) 3m long on either side ( as per respo drg. res 40 ) .welding of g.i.earth strips ( 50x6 ) mm and also laying of the m.s.round 32mm dia in trench of control room and connecting to both sides squares including cost of g.i. earth strip ( 50x6 ) mm approx. 40m length and earthing of all indoor equipment by laying and providing g.i.earth strip ( 50x6 ) mm including cutting & welding etc. 141 h.t. power cable laying: laying 11 kv, ( 3x300 ) mm2 xlpe, cable from power transformer to 11 kv incoming switch gear in the cable trench 0.45 m wide, 0.90m depth. providing 150 mm local sand for cushion beneath and 150 mm above the cable ( quality of local sand required 0.375 cum / m in length ) . the cable shall be dully protected by brick. on both side of cable by laying brick vertically and bricks would also be laid bricks along the single cable ( minimum 18 nos. of bricks are to be laid top and outer side along the single cable. the work includes digging of trenches, laying of cable in under ground trenches, joining of terminal’s, back filling of earth and testing and commissioning of power cable etc. spare cable shall be left over and laid in the trenches in shape of 6 m ring at both ends. 142 laying and dressing of 11 kv 3x300 mm2 power cable in air / trench. 143 laying 11 kv, 3x185mm2 xlpe, power cable from outgoing switch gear to 11 kv double poles in the cable trench 0.50m wide, 0.90m depth. providing 150 thickness mm local sand for cushion beneath and 150mm above the cable ( quantity of local sand required 0.375 cubm / m in length ) . the cable shall be duly protected by brick. on both side of cable by laying bricks vertically and bricks would also be laid horizontally on top of vertically laid bricks along the single cable ( minimum 18 nos. of bricks are to be laid top and outer side along the single cable. the work includes digging of trenches, laying of cable in under ground trenches, joining of terminal’s, back filling of earth and testing and commissioning of power cables etc. spare cable shall be left over and laid in the trenches in shape of 6m rings at both ends. at the end of feeder cables, where the cable is to be laid across pucca / main road, 100 mm dia g.i. pipe will be weared over the cable in the cable trench for the protection of cable. 144 laying and dressing of 11kv 3x185mm² power cable in air. 145 supply and filling of sand in cable trench in the switch gear room. 146 preparation of 11 kv power cable ends:making of 11 kv xlpe heat shrinkable outdoor jointing kits 3x185sq.mm / 3x300sq.mm after duly plumbing and taping of cable, providing, fixing and crimping of proper size good quality lugs 147 making of 11 kv xlpe heat shrinkable indoor jointing kits 3x185sq.mm / 3x300sq.mm in switch gears after carefully removing the insulation of cable, providing and crimping of proper size of lugs, plumbing and taping of cable with good quality available insulation tape with j / kit boxes, fixing and insulating of lugs on cable with switch gear complete in all respect. 148 installation of 24v battery and battery charger:assembling and installation of the cabinet of 24v battery and battery charger in switch gear control room including grouting of foundation bolts as per drawing of manufacture, including providing the foundation nuts and bolts of proper size. the electrical connection between battery and battery charge with flexible copper lead of size 7 / 20 swg shall be done properly. the work includes installation, wiring upto control panel, testing and commissioning complete in all respect. 149 laying of different size of ( 2x2.5 ) mm2 / ( 4x2.5 ) mm2control cables i.e. from buchholz realy to marshalling box marshalling box to indication protection board in switch gear room, 33 kv ct’s to ct’s junction box, 33 kv ct, 33 kv pt, v.c.b. control panel junction box to 33 kv vcb control panel and control panel to 33 kv vcb outdoor operating mechanism panel from t / f etc. in the cable trench including making proper connection at buchholz relay, marshalling box and indication board as per required for installed equipment. 150 erection of 11 kv feeder double poles:erection and grouting of 2 nos. stp 55 11mtr long for making dp structure including fabrication fixing of g.i. channel, g.i.angle, tpmo, fuse set, disc, insulators, pin insulators no. plate, danger board, barbed wire ( 02 kg per pole ) etc. the work includes supply and fixing of necessary clamps size 75x10mm with g.i.nuts bolt & washer, bolts and washers. the work also includes grouting of double pole support in c.c. 1:3:6 ( cement, core sand & stone ballast ) in block of size ( 0.45m x 0.45 x 1 / 6 length of the pole ) including earthing of double pole with g.i. earthing rod complete in all respect. 151 erection and grouting of 2 nos. pcc 9.0mtr long for making dp structure including fabrication fixing of g.i. channel, g.i. angle, tpmo, fuse set, pin insulators no. plate, danger board, barbed wire ( 01 kg per pole ) etc. the work includes supply and fixing of necessary clamps with nuts, bolts and washers. the work also includes grouting of double pole support in c.c. 1:3:6 ( cement, sand & stone ballast ) in block of size ( 0.45m x 0.45 x 1 / 6 length of the pole ) including earthing of double pole with g.i. earthing rod complete in all respect. 152 providing & wearing of 110 mm dia 3.5 mm long g.i. pipe in the feeder cable of size of ( 3x185 / 3x300 ) mm2 xlpe 11kv power cable before making the outdoor cable boxes. the work includes the sealing of g.i. pipe, top end and lower end of the pipe is to be buried in to the ground about ½ m and proper dressing of cable etc. the work includes lifting, mounting and clamping of 11 kv feeder cable boxes on the feeder with double pole structure and making connections including supply of cable mounting clamps etc. 153 erection of acsr dog conductor for jumpering on double pole 154 providing & fixing of smc danger board at each location as per specification of the drawing. size 200mmx250mm & 3mm thickness with g.i.clamp & nut & bolt 155 grouting of stay rods ( 16x1800 ) mm including all work of excavation, cement concrete in size ( 0.60x0.60x0.30 ) m in ratio 1:3:6 cement, sand, 20mm stone grift ) as per drg. including back filling of soil and proper ramming etc. 156 fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of stay insulators of 11kv and stay clamps. 157 painting of structurespainting of the following structure with one coat of ready mixed primer and two coats of isi mark aluminium paint after rubbing with sand paper to the surface of the structure including labour and t&p complete in all respect.double pole. 158 all welding joint of g.i.steel structure. 159 installation & mounting of 11kv / 0.433kv, 3 phase, existing 25kva, distribution transformer on 9 mtr pcc double pole and fittings. work complete in all respect. 160 installation of 33 kv isolators:assembling and installation of line / bus isolator on the isolator structure. adjusting of operating mechanism in proper alignment so as to ensure smooth operation of the same. in case of line isolator proper operation of earth links shall also be ensured. the work includes fabrication for proper fixing if required. 161 installation of 33 kv lightning arrestors: assembling and installation / mounting of 3 nos. lighting arrestors on the l.a.’s structure / terminal gentry, complete with earthing and line connections. the work includes fabrication for proper fixing, if required. 162 installation of 33 kv post insulators:installation of 3 nos. pi on structure. the work includes fabrication for proper fixing, if required. 163 installation of 33 kv fuse set:assembling and installation of fuse set on the fuse set structure. the work includes fabrication for proper fixing, if required. 164 installation of 33 kv vcbassembling and installation of 33 kv vcb on the vcb out door structure on the plinth. adjustment of operating mechanism in proper alignment for smooth operation of the same. the work also includes fabrication of addition arrangement for proper fixing, if required. 165 installation of 33 kv vcb control panel for single feeder & double t / f control panel.carefully and safely shifting of 33 kv vcb control panel from outside of the switch gear room to inside of the switch gear room, grouting with anchor bolts in the floor, work also includes cutting & proper finishing of floor if necessary for completion of work. placing and fixing of panel on foundation, bolts of proper size in proper position and alignment. 166 installation of 33 kv c.t.’s:installation of 3 nos. c.t.’s on the c.t’s structure. the work includes fabrication for proper fixing, if required to complete the work. 167 installation of 33 kv p.t.’s:installation of 3 nos. p.t.’s on the p.t’s structure. the work includes fabrication for proper fixing, if required to complete the work. 168 33 kv ct’s junction box:providing & fixing of junction box of size ( 400x400x150 ) mm made of g.i. sheet of 16 swg in between 33 kv ct’s & control panel. the work also include making proper connection on the junction box and making all connection in between ct’s and control panel complete as per manufacture’s panel drawing including testing and commissioning of work etc. complete the work. 169 33 kv bus bar jumpering:jumpering, including clamping / binding with acsr panther conductor / 33kv 3x300mm2 xlpe cable with providing p.g.clamp & other accessories.terminal gantry to 33kv p.t 170 33kv p.t to 33 kv p.i 171 33 kv p.i to 33kv l.a 172 33 kv l.a to 33 kv line isolator 173 33 kv line isolator to 33 kv vcb 174 33 kv vcb to 33 kv c.t 175 33 kv c.t to 33 kv p.i 176 33 kv post insulator to bus isolator. 177 33kv bus isolator to 33kv vcb 178 33kv vcb to 33kv ct 179 33kv ct to 33kv fuse set 180 33kv fuse set to 33kv l.a 181 33kv la to 33 / 11kv 10mva t / f 182 lighting arrangement of 33 / 11 kv s / s outdoor switch yard and its area:supply & installation and erection of 6 mtr. long street light supports with 2.4 feet long street light brackets including fixing and supply of junctions box, street light support shall be made and fabricated from g.i. pipe of 3.0 mtr. long 100mm dia. and 3.0 mtr. long 75mm dia with 2.4 mtr. long street light bracket in arc shape and made up of 40 mm dia g.i. pipe.grouting of support in c.c. ratio 1:3:6 ( cement, core sand and stone ballast ) in size ( 0.40x0.4x1.2 ) m, lightning poles shall also be earthed by connecting to earth mat. 183 supply and fixing of led light 120 w and of standard quality isi mark with water tight elbow fitting etc. complete in all respect and suitable for above street light supports ( acceptable make philips, bajaj, heawels or siska ) . 184 laying of 3½x70 mm2 pvc lt cable from 11 / 0.4 kv, 25 kva t / f to l.t. distribution board in switch gear room after digging trench for laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and laying brick over & both sides of l.t. cable after digging trench of 0.3 m wide & 0.5 m depth and providing and wearing 75 mm dia g.i. pipe of 2.5 m length over l.t. cable complete in all respect. 185 laying of 3x50mm2 11kv cable from 11kv outgoing vcb in control room to pcc double pole after digging trench for laying cable and refilling of trench including connections at both ends after providing and crimping of lugs of proper size for completion of work and laying brick over & both sides of 11kv cable after digging trench of 0.3 m wide & 0.5 m depth and providing and wearing 75 mm dia g.i. pipe of 2.5 m length over 11kv cable complete in all respect. 186 erection of l.t.aluminum xlpe insulated cable 1x50mm2 for jumpering ondouble pole. 187 providing and lightning arrangement of 33 / 11kv s / s control room ( 8 no. ceiling fans of preferable make havels, crompton & bajaj ) , ( 20 no. 12 watt led bulb with fitting if required preferable make philips, crompton, havels & bajaj ) 188 providing & fabrication of l.t. distribution board by using g.i. angle size ( 65x65x6 ) mm of size ( 2x0.75x1.4 ) m and grouting the stand in ground floor in switch gear room at proper place. 12 mm thick indian wooden ply with sunmica top will be fixed on the ply frame and frame will be painted by one coat of primer red oxide and two coats of smoke grey paint. 189 providing & fixing 100amp tpn mccb, 4 pole and 4 nos. 32amp single phase, mccb in box as per catalogue no. 607780 ligrant make or equivalent. 190 providing and laying ( 2x6 ) mm2 l.t. aluminium pvc cable from s.g. room to street light supports after digging of trench laying of ( 2x6 ) mm2 cable, providing brick on top of cable, refilling of trench, making connections of poles with street light fitting through junction box complete in all respect. 191 supply & fixing of aluminium clamps such as isolator, la, transformer end clamp, fuse set, post insulator, pg clamp etc. complete with nut, bolt & washer for dog / panther conductor 192 to provide required no. of technicians to work on power t / f, ht / lt panels & 33kv line during testing as assisting technical hands of test team during commissioning & energisation. 193 construction of sso’s approached road 1.2 mt wide in switch yard by laying dry brick ballast in 15 cm layer, 115 mm thick brick work 1:4 in both side of edge, providing 10 cm thick cc in ratio 1:2:4. the work include proper plastering top & side of road and making groove, leveling & dressing of earth beneath the brick work on edge. all required materials provived / supply by the contractor own his cost. 194 construction of fire protection wall size 5mtrx5mtr ( as per approved drawing ) . 195 digging of trench by excavation of earth of 1050x750mm size for 33kv line 196 safe laying of 33kv, 3x300sq.mm. xlpe cable in cable trench to respective double pole. 197 providing & laying of ist class bricks, along the length on both side of 33kv xlpe cable in cable trench ( minium 18no. bricks / mtr per cable ) and stone slab of size 450x600x50mm on top of the each cable, providing 150 thickness mm river sand for cushion beneath and 150mm above the cable as per specification. 198 back filling of excavated earth in the cable trench upto the ground level and ramming properly. 199 providing & fixing 150mm dia 2mm thick 3m long g.i.pipe over 33kv, 3x300sq.mm xlpe cable before mounting the 2no. cable on double pole. work includes fixing of clamp, sealing of top and bottom end of the g.i.pipe. one end of g.i.pipe is to be buried under earth about 500mm. 200 making of 33kv outdoor type cable end termination by heat shrinkable xlpe cable jointing kits and crimping with proper size aluminium lugs. work includes providing aluminum lugs, insulating tapes etc as per specifications. 201 dismentling of old 06 nos. 11kv vcb, 02 nos. 33kv vcb & transpotation topvvnl store...

Department Of Food And Civil Supplies - Uttar Pradesh

39901980 transport work of custom milled rice ( cmr ) for prahlad ray murlidhar rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39901939 transport of cmr for narayan industries rice mill in district gonda , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39901850 transport work of custom milled rice ( cmr ) for ahmad rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39901840 transport work of custom milled rice ( cmr ) for dubey mini rice mill in district gonda , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39901839 transport work of custom milled rice ( cmr ) for imran modern rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Department Of Food And Civil Supplies - Uttar Pradesh

39901767 transport work of custom milled rice ( cmr ) for shree shyam rice mill in district bahraich , quote percent in words , brick work in c.m 1:5 mix including all labour charges etc complete , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete , plastering in c.m 1:5 12 mm thick with including cost and conveyance of all materials and in , b ) ci bend 22.5° ( 250mm dia ) , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , supplying, conveying and fixing spls. including ea , supplying, conveying and fixing spls. including eart , construction of chamber for 100mm sluice plates , construction of chamber for 100mm sluices valve , laying and jointing pvc pipe. heading , plain cement concrete 1:4:8 ( one cement four fine aggregates and eight coarse aggregates ) using , brick work in c.m 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost , construction of chamber for 100mm sluices valve , the total value of schedule1 , the total value of schedule4 , select, excess ( + ) i.e. asor or less ( ) i.e. bsor...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39901712 tender for under the item business plan 2023 24, 02 nos. 250 kba established under 33 / 11 kv power substation bidhnu under power distribution subdivision nardal. fencing work of 01 no. 400 kva and switchyard. 1 fencing of 250 kva t / f iincluding material ( the support shall be grouted with cement, sand and brick ballast / stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast / stone ballast, as per actual site requirement. ) labour & t&p as per respo manual 2 fencing of 400 kva t / f iincluding material ( the support shall be grouted with cement, sand and brick ballast / stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast / stone ballast, as per actual site requirement. ) labour & t&p as per respo manual 3 pale fencing of 33 / 11 kv bidhnu substation switch yardincluding the cost of labour, t & p and carrier etc. required for proper completion of work....