North Central Railway - Uttar Pradesh
39713068 auction sale of c.i (consisting) sej chair plate, cms xing gutka off sizes, heel block, distance block, lc bracket, lc boom gutka etc. other details as per tms lot no....
39713068 auction sale of c.i (consisting) sej chair plate, cms xing gutka off sizes, heel block, distance block, lc bracket, lc boom gutka etc. other details as per tms lot no....
39671943 supply of special rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1 ( latest ) m 24 grade for the use in 1:8.5 cms xing portion ( 8 nos. of total length 4790mm ) as per drawing. tolerance of + / 5 percent is allowed. [ warranty period: 30 months after the date of delivery ] , special rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1 ( latest ) m 24 grade for the use in 1:12 cms xing portion ( 10 nos. of total length 5915mm ) as per drawing. tolerance of + / 5 percent is allowed. [ warranty period: 30 months after the date of delivery ] => limited...
39539125 auction sale of u/s cms xing 52 kg 1 in 12 without fitting 13 nos. (not fit for railway use)...
39487337 auction sale of cms xing obtuse 1in 85 52kg (without fitting),cms xing 52kg 1in 85 (without fitting)....
39239945 auction sale of scrap ci items consisting of sej plate off size 52/60 kg, c/r block, acb chair plate,cms xing heal block two hole off size, xing block two hole small off size, xing block four hole off size, xing block three hole off size,t/o block off size 52/60 kg,cms xing 52/62 kg c/r block, t/o block two hole off size,t/o block long one hole off size, cst 9,ci pot & cst 9 lk etc. including sample, total qty= 25.356 mt approx. delivery on actual weight basis. lot details joint verification repot(narrative report) of this lot is uploaded in ireps for lot details. ref ss 11 no. agc/scrap/ci scrap/aa/ss ii/2023 2024/558 date 21.04.2023. lot is approachable by pakka road. gst 18 percent. bidders are required to visit the lot site for being aware about the site condition/location and satisfy themselves before participating in the e auction....
38689726 auction sale of us flange cut check rail 90r, us flange cut check rail 50kg, us check rail xing 90r, us tounge rail 52 kg 10125mm, us rail 52kg, us rail 60kg, us cms xing 52kg 1 in 12, us cms xing 52kg 1 in 8.5...
38652669 auction sale of scrap of cms xing 52 kg 1 in 12 us stack no. 45, 46, 47...
38519688 auction sale of cms xing 60kg 1in12 ( scrap ) , cms xing 60kg 1in12 ( scrap ) , cms xing 60kg 1 in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1in 12 ( scrap ) , cms xing 60kg 1 in 12 without fittings scrap, cms xing 60kg 1 in 12 without fittings ( scrap ) , cms xing 60kg 1 in 12 without fittings ( scrap ) ....
38387632 auction sale of ci scrap consisting of broken pieces of do plate,/cst 9 plate sej, cms xing blocks, heel block and other p.way ci fitting. other details as per tms lot no....
38166181 auction sale of cms xings u / s...
37407442 auction sale of cms xing 1 in 12 60 kg, cms xing 1 in 12 60 kg, cms xing 1 in 12 60 kg, cms xing 1 in 12 60 kg....
36715794 supply of as per rdso drawing and conforming to irs specification no. t 23 2021, supply of various sizes 25 mm dia. bolts and nuts, bolts and nuts used with cms xing 1 in 12, 60 kg of size of size 25 mm dia x 260 mm long as per rdso drawing no. t 11521 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 12, 60 kg of size 25 mm dia x 290 mm long as per rdso drawing no. t 11524 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 12, 60 kg of size 25 mm dia x 320mm long as per rdso drawing no. t 11527 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 12, 60 kg of size 25 mm dia x 340 mm long as per rdso drawing no. t 11529 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 12, 60 kg of size 25 mm dia x 360 mm long as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 12, 60 kg of size 25 mm dia x 370 mm long as per rdso drawing no. t 11532 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] => limited...
36712624 supply of as per rdso drawing and conforming to irs specification no. t 23 2021 various sizes 25 mm dia bolts and nutsas per rdso drawing and conforming to irs specification no. t 23 2021 various sizes 25 mm dia bolts and nuts, fish bolts and nuts size 25 mm dia x 140 mm long as per rdso drawing no. t 11509 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nut used with joggled plates 60 kg of size 25 mm dia x 190 mm long as per rdso drawing no. t 11514 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 8.5, 60 kg of size 25 mm dia x 300 mm long as per rdso drawing no. t 11525 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts & nuts used with cms xing 1 in 8.5, 60 kg of size 25 mm dia x 310 mm long as per rdso drawing no. t 11526 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 8.5, 60 kg of size 25 mm dia x 390 mm long as per rdso drawing no. t 11534 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] , bolts and nuts used with cms xing 1 in 8.5, 60 kg of size 25 mm dia x 410 mm long as per rdso drawing no. t 11536 and conforming to irs specification no. t 23 2021 or latest. [ warranty period: 30 months after the date of delivery ] => limited...
36292219 auction sale of 60 kg cms xing ( 1 12 ) u / s in stack 01. other details as per tms lot....
36292218 auction sale of cms xing 60 kg ( 1 in 12 ) u / s in one stack. other detail as per tms lot....
36292217 auction sale of 60 kg cms xing ( 1 12 ) in one stack. other details as per tms lot....
36289732 auction sale of 60 kg cms xing ( 1 in 12 ) u / s in stack 01. other details as per tms lot....
35829062 supply of m. s. tapered washer for cms xingm. s. tapered washer for cms xing, m. s. tapered washer for cms xing, 60 kg 1 in 8.5 as per attached rdso drg. no. rt 5847., => limited...
35420768 auction sale of cms xing 1 in 12 60 kg without fitting, cms xing 1 in 12 60 kg without fitting, cms xing 1 in 12 60 kg without fitting....
35397473 auction sale of scrap cms xing of various types consisting of cms xing 52&60 kg [ 1:12&1:8.5 ] , obtuse & acute cms xing, cms xing for scissor 60 kg. and dds cms xing etc. total qty. 32 nos. total weight 24.156 mt. delivery on actual weight basis. lot details joint verification report ( narrative report ) of these lots is uploaded in ireps. ref ss 11 no. agc / scrap / cms xing / aa / ss 11 / 22 23 / 548 date 22.10.22. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
35397472 auction sale of scrap cms xing of various types consisting of cms xing 52 kg [ 1:12 & 1:8.5 ] , cms xing 90 r [ 1:12 ] , cms dmd xing 52kgs [ 1:12 & 1:8.5 ] etc., total qty. 24 nos, total weight 18.131 mt. delivery on actual weight basis. lot details joint verification report ( narrative report ) of these lots is uploaded in ireps. ref ss 11 no. agc / scrap / cms xing / aa / ss 11 / 22 23 / 549 date 27.10.22. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
35397471 auction sale of scrap ci consisting of c / r block of cms xing 52 / 60 kg, t / o block off size 50 / 60kg, cms xing heal block two hole, t / o block off size long one hole, t / o block off size squire two hole , t / o block off size small one hole, cms distance block, t / o block off size squire one hole, ci gate weight plate, sej plate off size 52 / 60 kg, ci gate wheel and ci insert with erc, pieces of ci pot&cst 9 etc. , total lot weight 20.524 mt approx. delivery on actual weight basis. lot details joint verification report ( narrative report ) of these lots is uploaded in ireps. ref ss 11 no. agc / scrap / ci scrap / aa / 22 23 / ss ii / 550 date 27.10.22. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
35397387 auction sale of ci scrap ( including sej chair, cms xing block, heel block etc. ) in one stack. other details as per tms lot....
35265675 auction sale of scrap 60kg & 52kg iiird class cms xing. total deliverable qty = 39.377 mt. delivery will be given on the actual weight basis. lot consists of total 54 stack. ( ref. ds8 no. 160969 dated 23 / 09 / 2022 ) ....
34648628 manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment no.3 of 2017 and as amended up to date. grsp for 1 in 12 scissors x over on psc 60kg t 8109 ass.executive uttar pradesh 24.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) pads for fan shaped t / out 1 in 12, 60 kg to rdso drg. no. t 5858 as per rdso drawings and irs specifications for grooved rubber sole plates ( 6 mm thick ) for placing beneath rails serial no. t 47 2006 amendment no. 2 of dec 2016 and as amended up to date ass.executive uttar pradesh 3.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs. and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment no.3 of 2017 as amended up to date grsp for cms xing portion for f / s layout 1 in 16 t 5693 ass.executive uttar pradesh 37.00 set , manufacturing and supply of 6mm thick grsp confirming to rdso drg. no, t 4218 ( alt.6. ) for p&c t / out 1 in 12, 60 kg ( with horns of drg. no. t 8292, 8294 & 8295 ) with irs specification for grsp 6mm thick for placing beneath rails serial no.t 47 2006 with amendments 3 of 2017 ( the alt in drawing an specification issued by rdso upto one month prior to tender closing date shall be applicable in this tender. ass.executive uttar pradesh 2898.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) pads for fan shaped t / out 1 in 8.5, 60 kg to rdso drg. no. t 4965, as per rdso drawings and irs specifications for grooved rubber sole plates ( 6 mm thick ) for placing beneath rails serial no. t 47 2006 no.1 of june 2007 and as amended up to date ass.executive uttar pradesh 2000.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs. and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment no.3 of 2017 as amended up to date grsp for derailing switch 1 in8.5, 60 kg t 6068 ass.executive uttar pradesh 1009.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) pads for fan shaped t / out 1 in 16, 60 kg to rdso drg. no. t 5691 as per rdso drawings and irs specifications for grooved rubber sole plates ( 6 mm thick ) for placing beneath rails serial no. t 47 2006 no.1 of june 2007 and as amended up to date ass.executive uttar pradesh 63.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) | as per rdso drgs. and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 200 amendment no. 3 of 2017 and as amended up to date. grsp for 1 in 8.5 scissors x over on psc 60 kg t 6092. ass.executive uttar pradesh 12.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 no.1 of june , 2007 and as amended up to date. g.r. pads for d / xing single slip 52 kg t 5363 ass.executive uttar pradesh 35.00 set , manufacture and supply of grooved rubber sole plates as per rdso ( grsp ) drgs. and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment no. 3 of 2017 and as amended up to date. g.r. pads for d / xing 1 in 8.5 52 kg t 5362 ass.executive uttar pradesh 25.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 no.1 of june , 2007 and as amended up to date. g.r. pads for d / xing double slip52 kg t 5364 ass.executive uttar pradesh 47.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 no.1 of jun 2007 and as amended up to date. item: fan shaped turn out 1 in 12, 52 kg. to rdso drg. no.t 4732. ass.executive uttar pradesh 50.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amended no.1 of jun 2007 and as amended up to date. item: fan shaped turn out 1 in 12, 60 kg. to rdso drg. no.t 4218. ass.executive uttar pradesh 330.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amended no.2 of dec 2016 and as amended up to date. item: fan shaped turn out 1 in 8.5, 60 kg. to rdso drg. no.t 4965. ass.executive uttar pradesh 77.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amended no.2 of dec 2016 and as amended up to date. item: fan shaped turn out 1 in 8.5, 52 kg. to rdso drg. no.t 4865. ass.executive uttar pradesh 1.00 set , manufacturing and supply of grooved rubber sole plates ( grsp ) as per rdso drg. and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amended no.3 of 2017 and as amended up to date.item: sej pads to rdso drg. no.t 4159. , manufacture & supply of 6 mm thick grsp confirming to rdso drg.no. t 5691 for p&c t / out 1 in 16, 60 kg with irs specification for grsp 6mm thick for placing beneath rails serial no. t 47 2006 with amendment no.2 of dec 2016 and as amended up to date. ass.executive uttar pradesh 2.00 set , manufacture & supply of 6 mm thick grsp confirming to rdso drg.no. t 4732 for p&c t / out 1 in 12, 52 kg with irs specification for grsp 6mm thick for placing beneath rails serial no. t 47 2006 with amendment no.2 of dec 2016 and as amended up to date. ass.executive uttar pradesh 50.00 set , manufacturing & supply of 6 mm thick grsp confirming to rdso drg. no. t 4218 ( alt.6 ) for p&c t / out 1 in 12, 60 kg ( with horns of drg. no.t 8292, 8294 & 8295 ) with irs specification for grsp 6mm thick for placing beneath rails serial no. t 47 2006 with amendments 3 of 2017. ass.executive uttar pradesh 50.00 set , manufacture & supply of 6 mm thick grsp confirming to rdso drg.no. t 4965 for p&c t / out 1 in 8.5, 60 kg with irs specification for grsp 6mm thick for placing beneath rails serial no. t 47 2006 with amendment no. 2 of dec 2016 and as amended up to date. ass.executive uttar pradesh 50.00 set , manufacture & supply of 6 mm thick grsp confirming to rdso drg.no. t 4865 for p&c t / out 1 in 8.5, 52 kg with irs specification for grsp 6mm thick for placing beneath rails serial no. t 47 2006 with amendment no.2 of dec 2016 and as amended up to date. ass.executive uttar pradesh 50.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.3 of 2017 and as amended up to date. g.r pads for d / xing single / slip 52kg t 5363 ass.executive uttar pradesh 5.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.3 of 2017 and as amended up to date. grsp for derailing switches 1 in 8.5, 60kg t 6068 ass.executive uttar pradesh 66.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.3 of 2017 and as amended up to date. grsp for cms x ing portion for f / s layout 1 in 8.5, sleeper no 41 to 54. ass.executive uttar pradesh 150.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.2 of dec.2016 and as amended up to date. item no.1 g.r pads for cms x ing portion for f / s layout 1 in 12 sleeper no 64 to 78. ass.executive uttar pradesh 100.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.3 of 2017 and as amended up to date. item: sej pads to rdso drg.no.t 4159 , manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drgs and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no.t 47 2006 amendmenet no.2 of dec.2016 and as amended up to date. item: gr pads for fanshaped turnout 1in8.5, 60kg with rdso drawing no:t 4965 ass.executive uttar pradesh 100.00 set , description: manufacture and supply of grooved rubber sole plates ( grsp ) as per rdso drawings and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment 2 of december 2016 and as amended up to date. item : grsp pad for derailing switch 1 in 8.5, 52kg t 5836 ass.executive uttar pradesh 100.00 set , manufacturing & supply of 6mm thick grsp confirming to rdso drg.no.t 4218 ( alt.6 ) for p&c t / out 1 in 12, 60kg ( with horns of drg.no.t 8292, 8294& 8295 ) with irs specification for grsp 6mm thick for placing beneath rails, serial no.t 47 2006 with amendments 3 of 2017 ( the alt.in drawingand specification issued by rdso up to one month prior to tender closing date shall be applicable in this tender. ass.executive uttar pradesh 200.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) for d / xing single slip 52kg as per rdso drawing no. t 5363 and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 no. 1 of june, 2007 and as amended up to date. ass.executive uttar pradesh 4.00 set , manufacure and supply of grooved rubber sole plates ( grsp ) for d / xing double slip 52kg as per rdso drg. no. t 5364 and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 no.1 of june, 2007 and as amended up to date. ass.executive uttar pradesh 4.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) for cms x ing portion for f / s layout 1 in12 sleeper no. 64 to 78 and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment 2 of dec. 2016 and as amended up to date. ass.executive uttar pradesh 30.00 set , manufacture and supply of grooved rubber sole plates ( grsp ) for cms xing portion f / s layout 1 in 8.5, sleeper no. 41 to 54 and irs specifications for grooved rubber sole plates ( 6mm thick ) for placing beneath rails, serial no. t 47 2006 amendment no. 3 of 2017 and as amended up to date. ass.executive uttar pradesh 30.00 set...
34362460 supply of m. s. tappered washer for cms xing, m. s. tappered washer for cms xing, , m. s. tappered washer for cms xing, 60 kg 1 in 12 as per attached rdso drg. no. rt 3930. => limited...
34138384 auction sale of ciscrap ( ciblock of shorts ) sc, ci scrap ( lubricator for greasing ) ( sc ) , cms xing 52 kg 1 in 12 ( sc ) , cms xing 60 kg 1 in 12 ( sc ) , cms xing 60 kg 1in 85 ( sc ) ....
34053194 auction sale of scrap cms xing 1 12 60kg, 1 12 52kg, 1 8 1 / 2 60kg, 1 8 1 / 2 52kg.total deliverable qty = 29.390 mt. delivery will be given on the actual weight basis ) lot consists of total 04 stacks. ( ref. no.: ds8 no. 122413 dated 15 / 06 / 2022 ) ....
34021444 auction sale of scrap ci consisting of ci sej chair off size 52kg / 60kg, ci sej chair off size 52kg / 60kg broken, ci fitting for level crossing, ci heel block cms xing off size ( two hole ) , ci heel block cms xing long ( four hole ) , ci check rail block off size, ci gate ki weight plate, ci released gate leaves wheel. total qty. 36.041 mt approx. lot details joint verification report ( narrative report ) of this lot is uploaded in ireps. delivery on actual weight basis. ref ss 11 no. agc / scrap / ci / aa / 2022 23 / ss 11 / 546 date 16.08.22. lot is approachable by pakka road. gst 18 percent. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
33768130 manufacture and supply of special g.r.s.p for cms xing portion ( conveyor belt ) ...
33768127 manufacture and supply of grsp for derailing switches, sej, tws & cms xing....
33757891 supply of manufacture and supply of grsp for derailing switches, sej, tws & cms xingmanufacture and supply of grsp for derailing switches, sej, tws & cms xing,g.r.s.p. for derailing switch 1 in 8.5, 60 kg. on psc sleeper as per rdso drg. no. t 6068 sse/p.way/td/agc uttar pradesh 133.00 set , g.r.s.p. for derailing switch 1 in 8.5, 52 kg. on psc sleeper as per rdso drg. no. t 5836. sse/p.way/td/agc uttar pradesh 12.00 set , s.e.j. pads as per rdso drg. no. t 4159 (1 set= 12 pads). sse/p.way/td/agc uttar pradesh 566.00 set , g.r.s.p. to rdso drg. no. t 6155 for 10125mm curved switch with zu 1 60 thick web tongue rail for 1 in 12 turnout bg(1673mm) for 60 kg. (uic) on psc sleeper sse/p.way/td/agc uttar pradesh 212.00 set , g.r.s.p. to rdso drg. no. t 6280 for 6400mm curved switch with zu 1 60 thick web tongue rail for 1 in 8.5 turnout bg (1673mm) for 60 kg. (uic) on psc sleeper sse/p.way/td/agc uttar pradesh 29.00 set , g.r.s.p. (6mm thick) for channel sleeper rdso drg. no.t 5163...
33756714 supply of manufacture and supply of special g.r.s.p for cms xing portion ( conveyor belt ) manufacture and supply of special g.r.s.p for cms xing portion ( conveyor belt ) , spl. rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1 ( latest ) m 24 grade for the use in 1:12 cms xing portion ( 10 nos. of total legth 5915mm ) as per drawing. tolerance of â± 5% is allowed. sse / p.way / td / jhs uttar pradesh 240.00 set , spl. rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1 ( latest ) m 24 grade for the use in 1:8.5 cms xing portion ( 8 nos. of total length 4790mm ) as per drawing. tolerance of â± 5% is allowed. sse / p.way / td / jhs uttar pradesh 160.00 set...
33398764 auction sale of scrap 60kg cms xing 1 12 & 1 8.5. total deliverable qty = 61.226 mt ( note: delivery will be given on the actual weight basis. ) lot consists of total 01 stack. ( ref. no.: ds8 no. 160959 dated 11 / 05 / 2022 ) ....
33043442 auction sale of scrap cms xing 52kg 1 into 12 not fit for rly use stack no ( 1 ) 16 nos scrap cms xing body total weight is 13120kg ( 13.12mt ) in up state loading by purchaser labour, delivery by number...
32828686 manufacture and supply of special g.r.s.p for cms xing portion....
32812717 supply of manufacture and supply of manufacture and supply of special g.r.s.p for cms xing portionmanufacture and supply of manufacture and supply of special g.r.s.p for cms xing portion,spl. rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1(latest) m 24 grade for the use in 1:12 cms xing portion (10 nos. of total legth 5915mm) as per drawing. tolerance of â± 5% is allowed. sse/p.way/td/jhs uttar pradesh 300.00 set , spl. rubber pads of 240mm width, 10mm thick made of nylon conveyor belt of 3 ply with cover thickness 5mm minimum at top and 1.5mm minimum at bottom confirming to is 1891 part 1(latest) m 24 grade for the use in 1:8.5 cms xing portion (8 nos. of total length 4790mm) as per drawing. tolerance of â± 5% is allowed. sse/p.way/td/jhs uttar pradesh 200.00 set...
32776726 auction sale of scrap cms xing 1 12 60kg, 1 12 52kg, 1 8.5 52kg & 1 12 52kg w / s. total deliverable qty = 41.775 mt ( note: delivery will be given on the actual weight basis. ) lot consists of total 02 stacks. ( ref. no.: ds8 no. 122409 dated 28 / 05 / 2022 ) ....
32755979 supply of as per rdso drawing no. t 11514. and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing.as per rdso drawing no. t 11514. and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing.,as per rdso drawing no. t 11514. and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 190 mm. , as per rdso drawing no. t 11521.and conforming to irs specification no. t 23 67, various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 260 mm. , as per rdso drawing no. t 11524 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 290 mm. , as per rdso drawing no. t 11525 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25 mm x 300 mm. , as per rdso drawing no. t 11526. and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 310 mm . , as per rdso drawing no. t 11527 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 320mm. , as per rdso drawing no. t 11528 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 330 mm ....
32481691 auction sale of scrap cms xing consisting of 60 kg 1:12 11 nos and 60 kg 1:8.5 04 nos in three [ 3 ] stack. total nos of cms xing 15 nos. total wt of cms xing 13.270 mts. ds 8 note no. 406578 date 27.04.2022. delivery on actual weighment basis at nearest govt. approved dharmakanta, if weighing facility not available with custodian. approachable road is available. gst 18 percent. note crossing of main running line is not permitted. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
32481689 auction sale of scrap cms xing consisting of 60 kg 1:12 10 nos and 60 kg 1:8.5 02 nos in two [ 2 ] stack. total nos of cms xing 12 nos. total wt of cms xing 11.000 mts. ds 8 note no. 406577 date 27.04.2022. delivery on actual weighment basis at nearest govt. approved dharmakanta, if weighing facility not available with custodian.approachable road is available. gst 18 percent. note crossing of main running line is not permitted. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
32481684 auction sale of scrap cms xing consisting of 60 kg 1:12 09 nos and 60 kg 1:8.5 07 nos in three [ 3 ] stack. total nos of cms xing 16 nos. total wt of cms xing 13.280 mts. ds 8 note no. 406579 date 27.04.2022. delivery on actual weighment basis at nearest govt. approved dharmakanta, if weighing facility not available with custodian. approachable road is available. gst 18 percent. note crossing of main running line is not permitted. bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
32310697 supply of as per rdso drawing no. t 11529 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing.as per rdso drawing no. t 11529 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing.,as per rdso drawing no. t 11529 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 340mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 360mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 350mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 370mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 380mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 390mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 400mm. , as per rdso drawing no. t 11531 and conforming to irs specification no. t 23 67 various sizes 25mm dia. bolts and nuts used with cms xing 1 in 12 and 1 in 8.5, 60 kg of size 25mm x 410mm....
31995506 auction sale of scrap cms xing 60kg & 52kg. total deliverable qty = 42.373 mt ( note: delivery will be given on the actual weight basis. ) lot consists of total 03 stacks. ( ref. no.: ds8 no. 122408 dated 01 / 04 / 2022 ) ....
31798211 auction sale of scrap cms xing consiting of 60 kg 1:12 12 nos, 60 kg 1:8.5 11 nos in two [ 2 ] stack. total nos of cms xing 23 nos. total wt 18.678 mts. ds 8 note no. 976890 date 07.03.2022. delivery on actual weighment basis at nearest govt. approved dharmakanta. approachable pakka road is available. gst 18 percent. note bidders are required to visit the lot site for being aware about the site condition / location and satisfy themselves before participating in the e auction....
31290468 auction sale of scrap cms xing 1 in 12 60 kg...
31264992 auction sale of ci distance block scrap, cms xing 52 kg 1 in 12 scrap....
31216484 auction sale of cms xing 52 kg 1 in 12 without fitting ( not fit for railway use ) ...
31079822 auction sale of scrap cms xing 52 kg 1 in 12 not fit for railway use. in up state, loading by purchaser labor, delivery by actual weight....
31064065 supply of m. s. tappered washer for cms xing.m. s. tappered washer for cms xing.,m. s. tappered washer for cms xing, 60 kg 1 in 8.5 as per attached rdso drg. no. rt 5847.,...