22484822
repair / maintenance of misc equipments such as dg sets , incinerator and allied works under ge ( east ) mathura 3 element fuel filter suitable for 30 / 40 kva dg set. nmake : feetguard / mico / cummins 4 oil filter suitable for 30 / 40 kva dg set. nmake: mico / cummins 5 air cleaner inner and outer suitable for 30 / 40 kva dg set. nmake: mico / cummins 6 packing kit / gas kit suitable for 30 / 40 kva dg set. ( set of 02 ) 7 dismantling unserviceable fip of 30 / 40 kva dg set, trasporting to workshop, complete repairing / overhauling & calibration by replacing unsv parts such as piston ring, fork liver, bush, nut & bolt etc including refixing, commissioning & testing complete all as directed. 8 dismantling and taking down unserviceable fuel injector with nozzle transporting to workshop for overhauling and testing of injector nozzle on test bench for fine mist spray including replacement unserviceable parts for dg set of capacity 30 / 40 kva complete all as directed. 9 taking down radiator complete from its mounting, dislodging top and bottom tank, cleaning complete tube by descaling solution, repairing any leakages by suitable welding work and finally re installing in original position, complete all as directed for 30 / 40 kva dg set. 10 material and labour for draining out diesel from tank of dg set capacity 30 / 40 kva, storing the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same ( if any ) with suitable welding, refilling the fuel and testing to the entire satisfaction of engr in charge including repairing / replacement of locking arrangement of fuel tank complete all as directed. n 11 m&l for cleaning the outer surfaces of complete dg set capacity 30 / 40 kva ( engine, alternator, base frame channel and fuel tank ) and applying two coats with super enamel paint of colour as specified on engine, alternator, base frame channel and fuel tank by spray painting including preparation of old steel surface complete all as directed. 12 repair, maintanance and servicing of dg sets of capacity 62.5 / 63 kva of any make & type including dismantling of top / head of dg set for thorough inspection by engineer in charge and re assembling the same after repair / replacement of unserviceable / worn out spare parts including necessary machinery works such as valve grinding, sheet cutting, boring, drilling, finishing, filling up lubricating oil, coolant etc and testing of dg set on full load continuous for minimum 8 hours all as directed at site. nnotes: n ( i ) spare parts required for servicing / maint of dg set will be measured & paid separately under item no 9.01 to 9.04 and other relevant items as supply only. n ( ii ) cost of labour for taking down, grinding, sheet cutting, boring, drilling, cleaning ( as included in the description of item ) & refixing shall be deemed to be included in unit quoted rate. n 13 supply only following items to be incorporated against item no 08 here in before: 14 element fuel filter suitable for 62.5 / 63 kva dg set. nmake: feetguard / mico / cummins 15 oil filter suitable for 62.5 / 63 kva dg set. nmake: mico / cummins 16 air cleaner inner and outer suitable for 62.5 / 63 kva dg set. nmake: mico / cummins 17 packing kit / gas kit suitable for 62.5 / 63 kva dg set. ( set of 02 ) 18 dismantling unsv fip of 62.5 / 63 kva dg set, trasporting to workshop, complete repairing / overhauling & calibration by replacing unserviceable parts such as piston ring, fork liver, bush, nut & bolt etc including refixing, commissioning & testing complete all as directed. 19 dismantling and taking down unserviceable fuel injector with nozzle transporting to workshop for overhauling and testing of injector nozzle on test bench for fine mist spray including replacement unserviceable parts for dg set of capacity 62.5 / 63 kva complete all as directed. 20 taking down radiator complete from its mounting, dislodging top and bottom tank, cleaning complete tube by descaling solution, repairing any leakages by suitable welding work and finally re installing in original position, complete all as directed for 62.5 / 63 kva dg set. 21 m&l for cleaning the outer surfaces of complete dg set capacity 62.5 / 63 kva ( engine, alternator, base frame channel and fuel tank ) and applying two coats with super enamel paint of colour as specified on engine, alternator, base frame channel and fuel tank with the help of air compressor including preparation complete all as directed. 22 supply and fixing in replacement flexible coupling for dg set of 62.5 / 63 capacity. 23 material and labour for draining out diesel from tank of dg set capacity 62.5 / 63 kva, storing the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same ( if any ) with suitable welding, refilling the fuel and testing to the entire satisfaction of engr in charge including repairing / replacement of locking arrangement of fuel tank complete all as directed. n 24 repair, maintanance and servicing of dg sets of capacity 100 kva of any make & type including dismantling of top / head of dg set for thorough inspection by engineer in charge and re assembling the same after repair / replacement of unserviceable / worn out spare parts including necessary machinery works such as valve grinding, sheet cutting, boring, drilling, finishing, filling up lubricating oil, coolant etc and testing of dg set on full load continuous for minimum 8 hours all as directed at site. nnotes: n ( i ) spare parts required for servicing / maint of dg set will be measured & paid separately under item no 17.01 to 17.04 and other relevant items as supply only. n ( ii ) cost of labour for taking down, grinding, sheet cutting, boring, drilling, cleaning ( as included in the description of item ) & refixing shall be deemed to be included in unit quoted rate. n 25 supply only following items to be incorporated against item no 16 here in before: 26 element fuel filter suitable for 100 kva dg set. nmake: feetguard / mico / cummins 27 oil filter suitable for 100 kva dg set. nmake: mico / cummins 28 air cleaner inner and outer suitable for 100 kva dg set. nmake: mico / cummins 29 packing kit / gas kit suitable for 100 kva dg set. ( set of 02 ) 30 dismantling unserviceable fip of 100 kva dg set, trasporting to workshop, complete repairing / overhauling & calibration by replacing unsv parts such as piston ring, fork liver, bush, nut & bolt etc including refixing, commissioning & testing complete all as directed. 31 dismantling and taking down unserviceable fuel injector with nozzle transporting to workshop for overhauling and testing of injector nozzle on test bench for fine mist spray including replacement unserviceable parts for dg set of capacity 100 kva complete all as directed. 32 taking down turbo charger and replacement of complete turbo charge kit with new and fixing to its original position complete all as directed for 100 kva dg set. 33 taking down radiator complete from its mounting, dislodging top and bottom tank, cleaning complete tube by descaling solution, repairing any leakages by suitable welding work and finally re installing in original position, complete all as directed for 100 kva dg set. 34 m&l for cleaning the outer surfaces of complete dg set capacity 100 kva ( engine, alternator, base frame channel and fuel tank ) and applying two coats with super enamel paint of colour as specified on engine, alternator, base frame channel and fuel tank with the help of air compressor including preparation complete all as directed. 35 supply and fixing in replacement flexible coupling for dg set of 100 capacity. 36 material and labour for draining out diesel from tank of dg set capacity 100 kva, storing the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same ( if any ) with suitable welding, refilling the fuel and testing to the entire satisfaction of engr in charge including repairing / replacement of locking arrangement of fuel tank complete all as directed. n 37 repair, maintanance and servicing of dg sets of capacity 140 / 160 / 180 kva of any make & type including dismantling of top / head of dg set for thorough inspection by engineer in charge and re assembling the same after repair / replacement of unsv / worn out spare parts including necessary machinery works such as valve grinding, sheet cutting, boring, drilling, finishing, filling up lubricating oil, coolant etc and testing of dg set on full load continuous for minimum 8 hours all as directed at site. nnotes: n ( i ) spare parts required for servicing / maint of dg set will be measured & paid separately under item no 26.01 to 26.04 and other relevant items as supply only. n ( ii ) cost of labour for taking down, grinding, sheet cutting, boring, drilling, cleaning ( as included in the description of item ) & refixing shall be deemed to be included in unit quoted rate. n 38 supply only following items to be incorporated against item no 25 here in before: 39 element fuel filter suitable for 140 / 160 / 180 kva dg set. nmake: feetguard / mico / cummins 40 oil filter suitable for 140 / 160 / 180 kva dg set. nmake: mico / cummins 41 air cleaner inner and outer suitable for 140 / 160 / 180 kva dg set. nmake: mico / cummins 42 packing kit / gas kit suitable for 140 / 160 / 180 kva dg set. ( set of 02 ) 43 dismantling unserviceable fip of 140 / 160 / 180 kva dg set, trasporting to workshop, complete repairing / overhauling & calibration by replacing unserviceable parts such as piston ring, fork liver, bush, nut & bolt etc including refixing, commissioning & testing complete all as directed. 44 dismantling and taking down unserviceable fuel injector with nozzle transporting to workshop for overhauling and testing of injector nozzle on test bench for fine mist spray including replacement unserviceable parts for dg set of capacity 140 / 160 / 180 kva complete all as directed. 45 taking down turbo charger and replacement of complete turbo charge kit with new and fixing to its original position complete all as directed for 140 / 160 / 180 kva dg set. 46 taking down radiator complete from its mounting, dislodging top and bottom tank, cleaning complete tube by descaling solution, repairing any leakages by suitable welding work and finally re installing in original position, complete all as directed for 140 / 160 / 180 kva dg set. 47 m&l for cleaning the outer surfaces of complete dg set capacity 140 / 160 / 180 kva ( engine, alternator, base frame channel and fuel tank ) and applying two coats with super enamel paint of colour as specified on engine, alternator, base frame channel and fuel tank with the help of air compressor including preparation complete all as directed. 48 supply and fixing in replacement flexible coupling for dg set of 140 / 160 / 180 capacity. 49 material and labour for draining out diesel from tank of dg set capacity 140 / 160 / 180 kva, storeing the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same ( if any ) with suitable welding, refilling the fuel and testing to the entire satisfaction of engr in charge including repairing / replacement of locking arrangement of fuel tank complete all as directed. n 50 repair, maintanance and servicing of dg sets of capacity 250 kva of any make & type including dismantling of top / head of dg set for thorough inspection by engineer in charge and re assembling the same after repair / replacement of unserviceable / worn out spare parts including necessary machinery works such as valve grinding, sheet cutting, boring, drilling, finishing, filling up lubricating oil, coolant etc and testing of dg set on full load continuous for minimum 8 hours all as directed at site. nnotes: n ( i ) spare parts required for servicing / maint of dg set will be measured & paid separately under item no 34.01 to 34.04 and other relevant items as supply only. n ( ii ) cost of labour for taking down, grinding, sheet cutting, boring, drilling, cleaning ( as included in the description of item ) & refixing shall be deemed to be included in unit rate quoted. n 51 element fuel filter suitable for 250 kva dg set. make: feetguard / mico / cummins 52 oil filter suitable for 250 kva dg set. nmake: mico / cummins 53 air cleaner inner and outer suitable for 250 kva dg set. nmake: mico / cummins 54 packing kit / gas kit suitable for 250 kva dg set. ( set of 02 ) 55 dismantling unserviceable fip of 250 kva dg set, trasporting to workshop, complete repairing / overhauling & calibration by replacing unserviceable parts such as piston ring, fork liver, bush, nut & bolt etc including refixing, commissioning & testing complete all as directed. 56 dismantling and taking down unserviceable fuel injector with nozzle transporting to workshop for overhauling and testing of injector nozzle on test bench for fine mist spray including replacement unserviceable parts for dg set of capacity 250 kva complete all as directed. 57 taking down turbo charger and replacement of complete turbo charge kit with new and fixing to its original position complete all as directed for 250 kva dg set. 58 taking down radiator complete from its mounting, dislodging top and bottom tank, cleaning complete tube by descaling solution, repairing any leakages by suitable welding work and finally re installing in original position, complete all as directed for 250 kva dg set. 59 material and labour for draining out diesel from tank of dg set capacity 250 kva, storing the same in clean barrels, cleaning of fuel tanks, checking for any leakages and repairing the same ( if any ) with suitable welding, refilling the fuel and testing to the entire satisfaction of engr in charge including repairing / replacement of locking arrangement of fuel tank complete all as directed. n 60 m&l for cleaning the outer surfaces of complete dg set capacity 250 ( engine, alternator, base frame channel and fuel tank ) and applying two coats with super enamel paint of colour as specified on engine, alternator, base frame channel and fuel tank with the help of air compressor ( spray painting ) including preparation of steel surface complete all as directed. 61 supply and fixing in replacement flexible coupling for dg set of 250 capacity. 62 supply & topping up engine oil 20w40 in dg sets complete. nmake: castrol / volvoline / bp / hp / indian oil 63 supply and topping up coolant in radiator of dg sets make: castrol / indian oil / hp / bp 64 supply & replacement of lead acid battery 12 volts, 180ah complete. nmake: exide / power tech / tata / amaron. 65 supply & replacement of lead acid battery 12 volts, 150ah complete. nmake: exide / power tech / tata / amaron. 66 dismantling of unserviceable self starter 24 volt dc suitable for dg set , transporting to workshop, complete repairing by replacing minor unserviceable parts such as carbon brush, bush, nuts & bolts, solinoid switch, bearing, drive penion and installing commissioning & testing complete all as directed. 67 dismantling of unserviceable self starter 12 volt dc suitable for dg set , transporting to workshop, complete repairing by replacing minor unserviceable parts such as carbon brush, bush, nuts & bolts, solinoid switch, bearing, drive penion and installing, commissioning & testing complete all as directed. 68 dismantling unserviceable self starter and supply & fixing in replacement new self starter 24 volt dc with solonied switch suitable for dg set including connecting, testing & commissioning complete all as directed. 69 dismantling unserviceable self starter and supply & fixing in replacement new self starter 12 volt dc with solonied switch suitable for dg set including connecting, testing & commissioning complete all as directed. 70 dismantling unserviceable battery charging alternator 24v, dc of dg sets, transporting to workshop, complete repairing / overhauling by replacing unserviceable parts such as carbon brush, bush, nuts & bolts, solinoid switch, bearing, armature including installation, commissioning & testing on full load complete all as directed. 71 dismantling unserviceable v belts and supply & fixing in replacement with new v belts. nmake: dunlop / finner for dg sets of following capacities: 72 30 / 40 / 63 kva 73 100 / 160 / 180 kva 74 250 kva 75 supply & fixing in replacement asbestos rope of size 15mm dia on silencer assembly of dg set complete all as per existing including removing existing old unserviceable rope all as dirceted. 76 supply and fixing in replacement of fuel pipe complete with brass nuts etc complete for dg set of any capacity any make as per site requirement, complete, all as specified and directed. 77 supply and fixing in replacement onload changeover switch ac, side handle operated in sheet metal encloure, 415 volts, 50 hz, four pole of capacity 63 amps including replacement of incoming and outgoing lugs and fixing arrangement on panel / wall complete after taking down old one all as directed. nmake havells. cat part no ihbffe0063 or equivalent in standard / hpl / l&t. 78 supply and fixing in replacement onload changeover switch ac, side handle operated in sheet metal encloure, 415 volts, 50 hz, four pole of capacity 100 amps including replacement of incoming and outgoing lugs and fixing arrangement on panel / wall complete after taking down old one all as directed. nmake havells. cat part no ihbffe0100 or equivalent in standard / hpl / l&t. 79 supply and fixing in replacement offload changeover switch ac, side handle operated in sheet metal encloure, 415 volts, 50 hz, four pole of capacity 200 amps including replacement of incoming and outgoing lugs and fixing arrangement on panel / wall complete after taking down old one all as directed. nmake havells. cat part no ihbffe0200 or equivalent in standard / hpl / l&t. 80 supply and fixing in replacement offload changeover switch ac, side handle operated in sheet metal encloure, 415 volts, 50 hz, four pole of capacity 320 amps including replacement of incoming and outgoing lugs and fixing arrangement on panel / wall complete after taking down old one all as directed. nmake: havells. cat part no ihbffe0320 or equivalent in standard / hpl / l&t. 81 supply and fixing in replacement offload changeover switch ac, side handle operated in sheet metal encloure, 415 volts, 50 hz, four pole of capacity 400 amps including replacement of incoming and outgoing lugs and fixing arrangement on panel / wall complete after taking down old one all as directed. nmake: havells. cat part no ihbffe0400 or equivalent in standard / hpl / l&t. 82 supply and fixing automatic transfer switch ac with encloure, 415 volts, 50 hz, four pole of capacity 125 amps for automatic and manual operation with complete protection conforming is / iec:60947 6 1 including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihyfcde125 or equivalent in standard / hpl / l&t. 83 supply and fixing automatic transfer switch ac with encloure, 415 volts, 50 hz, four pole of capacity 200 amps for automatic and manual operation with complete protection conforming is / iec:60947 6 1 including fixing arrangement on panel / wall complete all as directed. nmake: havells. cat part no ihyfcde200 or equivalent in standard / hpl / l&t. 84 supply and fixing automatic transfer switch ac with encloure, 415 volts, 50 hz, four pole of capacity 315 amps for automatic and manual operation with complete protection conforming is / iec:60947 6 1 including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihyfcde315 or equivalent in standard / hpl / l&t. 85 supply and fixing automatic transfer switch ac with encloure, 415 volts, 50 hz, four pole of capacity 400 amps for automatic and manual operation with complete protection conforming is / iec:60947 6 1 including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihyfcde400 or equivalent in standard / hpl / l&t. 86 supply and fixing in replacement mccb 4 poles 415 volts adjustable thermal and adjustable magnetic setting type of capacity 200 amps with breaking capacity 50 ka complete including taking down existing unserviceable including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihllnfcf0200 or equivalent in standard / hpl / l&t. 87 supply and fixing in replacement mccb 4 poles 415 volts adjustable thermal and adjustable magnetic setting type of capacity 320 amps with breaking capacity 50 ka complete including taking down existing unserviceable including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihllnfcf0320 or equivalent in standard / hpl / l&t. 88 supply and fixing in replacement mccb 4 poles 415 volts adjustable thermal and adjustable magnetic setting type of capacity 400 amps with breaking capacity 50 ka complete including taking down existing unserviceable including fixing arrangement on panel / wall complete all as directed. nmake : havells. cat part no ihllnfcf0400 or equivalent in standard / hpl / l&t. 89 m&l for repairing amf panel, detecting the electric fault, removing the defective control wiring & spare parts to make amf panel functional by replacement of following defective spares complete. nnote: n ( i ) spare parts will be measured & paid seperately as supply only. n ( ii ) taking down & refixing shall be deemed to be included in unit rate. n 90 supply only timer 230 volts, 50 hz ac of rating ( 0 60 second ) 91 supply only over voltage / low voltage relays of rating ( 370 460v ) 92 supply only auxiliary contacts with 1no+1nc suitable for mcx 34 power contactor. nmake : l&t cat part no. cs94118 or equivalent make given under list of make. 93 supply only auxiliary contacts with 2no+2nc suitable for mcx 43 power contactor. nmake : l&t cat part no.cs94114 or equivalent make given under list of make. 94 supply only contactor coil 230 volts, 50 hz ac suitable for 3poles power contactor ml 12 type. nmake: l&t cat part no.ss91011 or equivalent make given under list of make. 95 supply only contactor coil 230 volts, 50 hz ac suitable for 4 poles power contactor mcx 43 type. make : l&t cat part no.cs94195 or equivalent make given under list of make. 96 supply only contactor coil 230 volts, 50 hz ac suitable for 4 poles power contactor mcx 34 type. nmake : l&t cat part no.cs94196 or equivalent make given under list of make. 97 supply only power contactor 3 pole, ml 12 type 415 volts with 2no+2nc auxiliary contacts and coil voltage 230 volts, 50 hz ac. nmake: l&t cat part no.ss91010 or equivalent make given under list of make. 98 supply only power contactor 4 pole, mcx 43 type 415 volts with 2no+2nc auxiliary contacts and coil voltage 230 volts, 50 hz ac. nmake: l&t cat part no.cs97025 or equivalent make given under list of make. 99 supply only power contactor 4 pole, mcx 34 type 415 volts with 1no+1nc auxiliary contacts and coil voltage 230 volts, 50 hz ac. nmake: l&t cat part no.cs97022 or equivalent make given under list of make. 100 supply only power contactor 3 pole, mnx 400 type 415 volts with 1no+1nc auxiliary contacts and coil voltage 230 volts, 50 hz ac. nmake: l&t or equivalent make given under list of make. 101 supply only automatic engine controller microprocessor based dgc 6d type for automatic dg start and supervisory control device housed in 96x96 mm flush mounted enclosure including testing complete all as dirceted. nmake : procom or equivalent make given under list of make. 102 supply and fixing in replacement power command controller hmi211 display panel kit model 0541 1394 complete all as directed. nmake : cummins or as per existing. 103 supply, laying, jointing and testing of xlpe insulated, sheathed, armoured, heavy duty lt 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle / clamps complete all as directed including taking out the old burnt out cables all as directed of size 50 sqmm 3.5 core. 104 supply, laying, jointing and testing of xlpe insulated, sheathed, armoured, heavy duty lt 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle / clamps complete all as directed including taking out the old burnt out cables all as directed of size 95 sqmm 3.5 core. 105 supply, laying, jointing and testing of xlpe insulated, sheathed, armoured, heavy duty lt 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle / clamps complete all as directed including taking out the old burnt out cables all as directed of size 120 sqmm 3.5 core. 106 m&l for earthing for dg sets & amf panels complete with galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 mtr below normal gl with the top edge of the plate not less than 1.5 mtr below the normal ground level connected to gi strip of size 32mmx6mm and watering pipe 15 mm bore gi pipe light grade ) and chamber pcc m 7.5 grade ( nominal mix ) using 40 mm graded stone aggregate, coping shall be m 10 grade ( nominal mix ) using 20 mm graded stone aggregate and rcc m 15 grade ( nominal mix ) using 20 mm graded stone aggregate pit cover 50 mm thick re inforced with 8 mm tor ms bar at 80 mm c / c both way including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate no. 3 of ssr part i and as specified including test point, charcoal dust, common salt complete and earth lead upto 7.5 mtr connected to earthing test point all as specified and testing of eathing on completeion complete. 107 supply, fixing and connecting gi strip of size 32x6mm as earth lead complete. 108 m&l for replacement of thermocouple as per sample for incinerator plant complete. 109 m&l for replacement of electromagnetic solenoid main valve as per sample for incinerator plant complete. 110 m&l for replacement of timer as per sample for incinerator plant complete. 111 m&l for replacement of blower inter lock switch as per sample for incinerator plant complete. 112 m&l for replacement of lpg gas power burner as per sample suitable for primary & secondary chamber of lpg incinerator plant of capacity 10 kg / hr complete. 113 dismantling of id fan complete with motor of incinerator plant and transporting to civil workshop for repairing and repairing with repacement of fan, bearings, shaft, v belts including machinery work, refixing and connecting with existing system and testing complete 114 dismantling of blower fan complete with motor of incinerator plant and transporting to civil workshop for repairing and repairing with repacement of fan, bearings, shaft including machinery work, refixing and connecting with existing system and testing complete. 115 dismantling of water circulating pump and repacement new water ciculating monoblock pump coupled with 2 hp single phase 230v, 50 hz, ac motor and connecting with existing system and testing complete. 116 dismantling alternator from the engine base of dg set any capacity and rewinding of field coils of alternator with super enamelled wire including varnishing and heating including reassembling and testing for capacity of dg set form 30 kva to 250 kva all as directed. 117 supply and fixing in replacement anti vibration pads of dg sets including taking out existing unserviceable of following capacities: 118 30 kva to 63 kva capacity. 119 100 kva to 180 kva capacity. 120 250 kva capacity. 121 supply and fixing in replacement copper battery lead 1.5 mtr length red colour complete with copper terminals all as directed. 122 supply and fixing in replacement copper battery lead 1.5 mtr length black colour complete with copper terminals all as directed....
Due Date : December 05, 2019
Tender Value : ₹ 20 Lakhs