Military Engineer Services - Uttar Pradesh

37257938 spl repair / replacement of asbestos cement sheet into galvalume sheet with connected works, provn of 13 x acs for various locations and replacement of ceiling fans, electronic meter, summer and cooling appliances at talbehat mil stn...

Food Corporation Of India - Uttar Pradesh

34136930 annual repair and maintenance of work at fsd naini dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below 2 dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 3 demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge.in cement mortar 4 removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m ( stacks of cleaned bricks shall be measured ) : from brick work in cement mortar 5 dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: asbestos cement sheet 6 removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete. 7 providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. 8 wall painting with premium acrylic emulsion paint of interior grade, having voc ( volatile organic compound ) content less than 50grams / litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour.two coats 9 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 10 white washing with lime to give an even shade : old work ( two or more coats ) 11 finishing walls with acrylic smooth exterior paint of required shade :new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 12 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer incharge.all kinds of soil 13 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level :1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources ) 14 providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement all work up to plinth level :1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources 15 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 16 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 17 supplying and fixing 3 mm thick translucent white acrylic plastic sheet to suit semi corrugated sheet roofing made from thermo setting polyester resin fiber reinforced as per isi 2866 1989 to suit fully corrugated ac sheet roofing overlapping on corrugation and with light transmission not less than 80 % with two diagonal bracing of ms flats 40x6mm including self tapping screws epdm seal and washer complete as per the direction of engineer in charge but excluding the cost of purlins rafters and trusses 18 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 19 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 20 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 4.0 mm thickness ( weight not less than 10kg / sqm ) 21 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws 22 providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm 23 providing and fixing bright finished brass tower bolts ( barrel type ) with necessary screws etc. complete : 250x10 mm 24 providing and fixing bright finished brass handles with screws etc. complete:125 mm 25 painting with synthetic enamel paint of approved brand and manufacture to give an even shade :two or more coats on new work 26 providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand / make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing p / s trap, complete in all respect as per directions of engineer in charge. 27 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in c.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required : single half stall urinal with 5 litre p.v.c. automatic flushing cistern 28 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge. 29 providing and fixing counter top wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 500x400 mm with a pair of 15 mm c.p. brass pillar taps. 30 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: white glazed fire clay kitchen sink of size 600x450x 250 mm 31 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i / c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia pipes 32 providing and fixing cp brass bib cock of approved quality :15 mm nominal bore 33 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15mm nominal bore 34 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia 35 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 1500x450 mm 36 providing and fixing ptmt grating of approvdquality and colour .circular type 100 mm nominal dia 37 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.granite stone slab of colour black, cherry / ruby red area of slab upto 0.50 sqm 38 lettering with foame of required colour and shape etc complete over granite / wall as per direction of engineer in charge 39 lettering with brass of required colour and shape etc complete over granite / wall as per direction of engineer in charge 40 reinforced cement concrete work in walls ( any thickness ) , including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing andreinforcement : 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) 41 centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers andcantilevers 42 providing and placing on terrace ( at all floor levels ) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 43 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo mechanically treated bars of grade fe 500d or more. 44 centering and shuttering including strutting, propping etc. and removal of form for walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc. 45 providing and laying vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand ) jointing with grey cement slurry @3.3 kg / sqm including grouting the joints with white cement and matching pigments etc. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. glazed vitrified tiles matt / antiskid finish of size of tile 600 x 600 mm 46 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 47 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 80 mm thick c.c. paver block of m 30 grade with approved color design and pattern. 48 providing and laying at or near ground level factory made kerb stone of m 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ) , including making drainage opening wherever required complete etc. as per direction of engineer in charge ( length of finished kerb edging shall be measured for payment ) . ( precast c.c. kerb stone shall be approved by engineer in charge ) . 49 credit for old dismanteled windows and doors 50 credit for old iron scrap 51 providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) . 52 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and accessplatform...

Military Engineer Services - Uttar Pradesh

33694949 provision of certain sanctioned works under ge west bareilly 1 m & l for non skid ceremic colouredtiles7 to 8 mm thick ( square / rectangular ) areaof each tile exceeding0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match incl dismantling of tiles and demolition of concrete base n. exc 40mm thick and m&l for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishesall as specified and directed. 2 m & lfor colour glazed ceremic colouredtiles invertical surface 300 x 600 x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed. 3 taking down chowkats or frames with shutters ( without taking off shutters from the frames ) not exceeding 1.5 sqm each including iron mongries, hold fast etc andincluding making good disturbed portions of walls in cm 1:4 complete all as specified and directed. 4 s&f 150mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. 5 m&l for 100mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. 6 s&f, 100 mm long aluminium anodised barrelbarrel tower bolts of extruded section and fixed as specified and as directed. 7 s&f 75 mm stainless steel but hinges medium wtsteel hinge pin, bright polished and fixed 8 s&f framed work such as grills, gratings, steel post and struts in fencing incl drilling holes, notching for wire etc, including straining bolts, holdfasts, wall ties, clamps, angle iron etc with end bars shouldered or riveted or forged into spikes, framed gaurd bars, railing frame work and similar confirming to fe 410 o complete all as specified and directed. 9 m&l for painting to steel surfaces of any description exc 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated surfaces all as specified and directed. 10 s & f sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. 11 s& fgalvanised stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed . 12 m & l for plain cement concrete 1:3:6type c 1 as in bed blocks for hold fast and similar work etc complete all as specified and directed. 13 m&l for precast cement concrete 1:2:4, type b1 ( using 20 mm graded stone aggregate ) in landings, cover slabs ( for manholes etc. ) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing reinforced cover complete all as specified and directed. 14 demolition of brickwork built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. 15 m&l for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar complete all as specified and directed. 16 m&l for rendering 15mm thick on brick wall or concrete surfaces in cement mortar ( 1:4 ) finished the surface even and smooth without using extra cement complete including taking down cement / new plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed. 17 m&l for rendering 15mm thick on brick wall or concrete surfaces in cement mortar ( 1:6 ) finished the surface even and smooth without using extra cement complete including taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and directed. 18 m&l for preparing newly plastered surfaces of walls and applying two coat of cement base paint on walls all as specified and directed. 19 m&l for preparing old plastered surfaces of walls and applying one coat of cement base paint on walls including complete removing of existing treatement all as specified and directed. 20 m&l for preparing old plastered surfaces of walls and applying one obdon walls including complete removing of existing treatement all as specified and directed. 21 m&l for preparing newly plastered surfaces of walls and applying one obdon walls all as specified and directed. 22 demolition stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed 23 s&f 20 mm thick granite stone slabs mirror polished of colour and shade as approved by ge, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like etc complete all as specified and directed . 24 rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed 25 m&l forpcc 1:3:6 type c 2 ( 40 mm stone agg ) as in plinth protection 75 mm thick finishing cement concrete even and smooth without using extra cement. including75 mm wide and 3 mm thick glass dividing strip inserted in positionat every one meter and change of direction including demolition of cement concrete ( un reinforced ) in ground floor or pavings of any description n exc 15 cm thickness ( below or above ground level ) 26 demolition of cement concrete ( reinforced ) inroofs , floors ( other than ground floors ) beams, staircases, landing, chajjas and similar suspended work 27 m & l formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified. 28 m & l formwork to sides and soffits of lintels, lintel bend, beams etc finished rough surfaces of concrete complete all as specified. 29 m&l for mild steel bar 6 to 8mm dia and over tmt bars, cut to length, bent to shape, required including cranking bending spirally for hooking ends etc and binding with ms wire ( annealed ) not less thn 0.90mm dia all as specified and directed. 30 s&f tmt bars 10mm dia and over, cut to length, bent to shape required, including binding with mild steel wire ( annealed ) not less than 0.9mm dia. 31 s&f deformed or twisted bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required, including binding with mild steel wire ( annealed ) not less than .9mm dia. 32 m&l rcc 1:2:4 type b1 using 20 mm graded aggregate as in chajjas and like all as specified and directed. 33 m&l rcc 1:2:4 type b1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed. 34 s&fin repair vitreous china squatting pan orissa pattern size 580mmx440mm white with integral foot rests excluding 10ltrs capacity pvc flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low level. 35 s&f in repairs10 ltrs pvc valveless syphonic action typeflushing cistern low level white , with inlet ball valve, float and handle including bracketwith 32 mm dia pvc pipe 600 mm long complete all as specified and as directed. 36 cutting chases for gi consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth 37 s&f in repair bib taps 15mm bore cp fency long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed all as specified 38 s&fin repair 15mmbore fency type cp brass stopvalves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds 39 s&fin repair 15mmbore fency type cp brass anglevalves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds 40 s&fin repair 15 / 20mmbore fency type cp brass concealed stopvalves, cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or for unions and fixeds 41 s&f in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55x45x82cm complete including fancy cp pillar tap, cp waste coupling , waste pipe , complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by eng in charge.model : whb cat no 10072, pedestal cat no. ped 11029 neptune of hindware , parryware cat no c0480 ( sp ) 181 / cth , c 0375 pedestral, cera cat no 2090107ped , cat no s 2040112 whb 42 s&f for 5.5mm thick looking mirror of selected quality, beveled edge 450mmx600mm glass mounted on 6mm thick ac building board and fixed to wooden plug with chromium plated brass screw and cup washer fixed in repair including 5.5mm thick glass self of 12cm wide with guard railing of 600mm long complete all as spd. make of mirror: atul / golden fish / modiguard. 43 s&f pvc connection 15mm bore length not less than 450 / 600 mm long with both ends ptmt nuts complete all as specified. 44 s&f 32mm bore low density polyethylene ( ldpe ) ( corrugated waste pipe ) pipes of pressure rating 6 kgf / sq. cm 45 s&f20 mm dia gun metal , globe or gate valves , with iron wheel head , screwed both ends for iron pipe 46 m&l taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore 47 m&l taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore 48 s&f 15mm bore gi water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor. 49 s&f 20mm bore gi water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor. 50 refixing 15mm bore old steel water tubing and connection in new or old position ( walls, ceilling, floor etc ) 51 refixing 20mm bore old steel water tubing and connection in new or old position ( walls, ceilling, floor etc ) 52 s&f 75 mm bore pvc ( swr ) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floors all as specified. 53 s&f75 mm bore. pvc ( swr ) junction single ( single t ) equal or unequal with access door. 54 s&f 75 mm bore pvc ( swr ) pipes ofsingle socketed in any length with rubber ring joints fixed to wall all as specified. 55 s&f 75 mm bore. pvc ( swr ) bends 56 s&f 75 mm dia pvc ( swr ) bends any radiuswith access door 57 s&f 75 mm dia pvc ( swr ) floor trap plain with greting incl jointing with solvent cement 58 s&f 110mm dia pvc ( swr ) pipes single socketed in any length with rubber ring joints laid in trenches / floor. 59 s&f 110mm bore pvc ( swr ) bends with oval access door all as specified 60 s&f 110 mm pvc ( swr ) bend any radius 61 s&f 110mm bore.pvc ( swr ) junction single ( single t ) equal or unequal with access door 62 s&fin repair grating doom 100 mm dia of ptmt ( min wt 25 gms ) 63 s&f towel rail cast copper alloy, chromium plated 600mm long with bracketin repair. 64 s&f in repair110 mm dia pvc ( swr ) vent cowl. 65 s&f 110 mm pvc ( swr ) bend any radius 66 s&f 80 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof 67 removing excavated materialn exc 50mand depoting where directed at a level n exc 1.5m above the starting point. 68 demolition of cement concrete as in ground floor & paving n.exc 15cm thick ( below or above ground level ) complete all as specified and directed. 69 m&l for 75mm thickpcc 1:4:8 type d 2 ( 40 mm stone agg ) as in sub base finishing cement concrete even amd smooth without ung extra cement. 70 m&l60 mm thickness machine pressed precast interlocking paver block anyshape and size conforming to is 15658 2006 ofm 40 grade with grey cement andpigment. 71 m&l for sand for plastering or pointing or laid for paver 72 s & f for 500 ltr capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in ssr part i and dismantling water tanks and with float valve and tank nipple and complete all as specified removing to store. 73 material & labour for solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube supplying & fixing in opening as per specification & drawing. 74 material & labour for factory made solid panel pvc wood grain printed door shutter 30mm thick ( style ) consisting of frame made out of ms tubes for top & bottom rails ms frame shall be covered with heat molded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour pvc sheet to be fitted in the ms frame welded / sealed to the stiles & rails with suitable pvc sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site make : rajshri / sintex ( make should be engraved on item ) complete all as specified & directed. 75 m&l for cement concrete type e2 1:5:10 ( 40 mm graded aggregate ) as in mass concrete 76 dismantling of asbestos cement sheet ( corrugated, semi corrugated etc ) in roof covering. 77 m&l for prepainted galvatume aluminium zinc coating gi based corrugated steel sheet 0.50mm thick of an color having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. 78 s & f prepainted galvalume aluminium zinc coating gi base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / clading to wall, fixed with self tapping screws / l type or j type or cranked hook bolts dismantling of ac sheet etc as complete all as specified and directed. 79 vitreous china urinal size 420x395x635mm white ( exculding flushing cistern flush pipe and waste pipe. 80 excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, getting out in soft / loose soil etc., in luding trimming bottom and sides of trenches, leveling / grading and ramming bottom of excavation complete all as specified and directed 81 m& l for cement concrete ( 1:4:8 ) d2 ( 40 mm graded aggrigate ) in foundation, filling and mass conrete 82 m & lfor40 mm thick cement concrete ( 1:2:4 ) type b2 ( using 20 mm stone aggregate ) finishing with using extra cement as specified and directed. 83 m&l forpre cast reinforced cement concrete 1:1.5:3 type a 1 ( using 20mm graded stone aggregate ) ( nominal mix ) as in slabs supported on wall, landing, balconies, shelves and like including bonding agent , complete all as specified ( reinforcement to be measured & paid under respective items ) . 84 returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil, complete all as specified and directed. 85 surface excavation n.exc 30 cm deep and avg 15cm deep and getting out soft and loose soil 86 pcc ( 1:2:4 ) type b 1 ( using 20 mm graded aggregates ) , as in flooring 25 mm thick. complete all as specified. 87 m&l hardcorebroken stone or bolder of gauges exc 63mm but n exc 100mm deposited spread and levelled oin laoyers n exc15cm thick wat ered and rolled / rammed to a true surface complete all as specified. 88 m&l preparing new plaster surface of wall and applying twocoat of colour wash over a coat of coat of white wash 89 m& l framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( inclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening andfixing complete 90 mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. 91 formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter 92 excavation in post holes ( or similar holes ) in any type of soil, each not exc 0.5 cum, getting out, returing filling and ramming carts not exc 25 cm, watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete. 93 excavation over area in not exc 1.5m in depth, getting out in soft / loose soil etc incl trimming bottemand sides of trenches leaveling and grading and ramming bottem of excavation incl removing of surplus soil complete all as specified and directed. 94 m&l steel work in tublar hollow rectangular / square trusses, purling rail incl special shapedwasher etc complete using erw or induction butt welded tubes confirming to is 1161 1979 grade incl one cote of zinkchromate primer before fabrication distance pieces cleatsetc gde fe 410 s complete all as specified and directed. 95 m&l for hardcore broken brick 150 mm thick of gauge n exc 63mm, deposited, spread, and levelled in layer n exc 15 mm thick watered and rammed / rolled to a true surface. 96 s&f in repair pre coated galvalume aluminium zinc coating gi based semi correcated stell sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall , fixed self tapping screws as specified 97 supply only chain link ms galvanised fencing of 3 to 4 mm dia of chain link fencing ( size of pitch50 mm ) complete all as specified and directed 98 fixing only 3 to 4 mm dia of chain link fencing ( size of pitch50 mm ) incl line wires rails, straining bolt, etc incl provision of binding wire complete all as specified and directed 99 s& f ms post holes and struts in fencing ( any size of angle ) mm incl incl cutting tops to shapes as directed incl drilling holes for bolting of ms flat iron in horizontal, vertical & diagnalfaces of each panel to be interwined with chain link fencing and fixed to ploses with ms nutboalts of exc 5 cm nexc 10cm in length and 10 15 mm dia and washers wind ties for sign board posts and struts, ms flat over post with necessary holes and rebating and similar work confirming to fe 290 gde e165, one coat red oxide before fixing complete all as specified and directed 100 brick work with subclass fly ash brickwork in one and half brick thick honey comb walling in cm 1:4 101 s&f non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ( 400x400mm ) , as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer cm 1:4 for laying finishes, complete all as specified as directed by engr in charge and approved by ge. 102 m&l for glazed ceramic digital coloured tiles in vertical surfaces of wall ( 450x300x8mm thick ) set and jointed in neat cement slurry pointed in coloured cement to matchover 15 mm thick plastering in cm ( 1:4 ) on stone masonry or other than fair face of brickwork complete all as specified. 103 s&f vitreous china half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe 104 brickbats filling of gauge 80mm to 150mm 105 extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd. 106 m&l for 200 mm bore reinforced concrete pipes class n p 2, laid and jointed complete with collars all as specified and directed 107 m&l for concrete bed for 200mm in pcc 1:3:6 type c 2 ( using 40 mm graded stone aggregate ) to drain pipes including packing under, haunching against the sides of pipes after they are laid and testedcomplete all as specified and directed. 108 taking down chowkats or frames with shutters ( without taking off shutters from the frames ) exceeding 1.5 sqm but not exceeding 4.0 sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in cm 1:4 complete all as specified and directed. 109 taking down shutter of any description area exc. 1 sqm but n.exc.2 sqm each and removing from site complete all as specified and directed. 110 all as per above itemabove but area n.exc.1.0 sqm each. 111 material & labour for second class hard wood ( sal ) plain, solid, straight chawkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified. 112 supply & fix 30mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides as specified. 113 supply & fix 35 mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides as specified. 114 supply & fix 150mm size aluminium alloy handles, febricated type extruded section, isi markedall as specified. 115 supply & fix 150mm longaluminium anodised barrel tower boltsof extruded section all as specified. 116 supply & fix 300mm long aluminium alloy, sliding door bolt withhasp & staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. 117 supply & fix 100mm size aluminium anodised hasp & staple safety type andfixing bolts to hinge plate fixed with screws all as specified. 118 supply & fix rubber beading for doors of required size all as specified and directed. 119 supply & fix 0.50mm thick plain, aluminium sheeting, alloy 31000 h4 in drip and straight flashing on doors all as specified. 120 supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed. 121 material & labour for mild steel work as in small articles flat iron of required size as in hold fasts, angle cleats, clamps, hooks, straps and similar small articles complete all as specified and directed. conforming to the gde fe 410 0 or310 0. 122 material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed. 123 taking down cement or cement lime plaster any description from brick or stone walls / ceiling etc including raking out joints, hacking for key & scrubbing down with water all as specified. 124 m & l for 15 18 mm thick machine cut kota stoneslab flooring and jointed with grey cement slurry fixed with pigmentto match to shade of the slab including rubbing and mirror polishing over and and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding ( but not backing ) including removing the rubbish off the premises complete all as specified and directed. 125 m&l for sand cushioning laid in trenches for laying of lt ug cables complete all as spd and directed. ( punned thicknessof cable shall be measured ) 126 m&l common burnt clay building bricks, sub class ‘b’ designation 75 for lt ug cable protectioncomplete 127 supply and laying & testing ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 10 sq mm, 4 core. 128 s & f in replacementgi pipe light grade 40 mm bore for cable protection, fixed to pole / alongwall / floor / under road / across the drain or nallaha etc of following sizes complete all as specified & directed. 129 supply and fixing led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl ding thermal anagement in multiple optics complete with ip 65 / 66 protection complete of 120 watt . bracket made out with gi pipe medium grade not less than 1.2 mtr long and bent to shape incl 02 nos ms clamps of size 50x6 mm with nut bolt washer complete with connction of street light from pole box to fittings with 1.5 sq mm3 core copper conductor complete all as spd and directed . 130 supply and erection, in truly vertical position, lt steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 sp 22 ( 8.5 mtr long ) including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by engineer in charge.note : pcc, earth work and ms work as cross arms clamps etc will be measured and paid separately in respective items . 131 s&f in repair loop in loop out box of size 30x20x20cm made out from 1.6mm thick pvc sheet weather proof, dust and vermin proof with hinged door and locking arrangements with slanting cover on top and provision of 04 nos aluminium bus bar of size 25mm x 2mm 4 nos fixed on insulator and one mcb of capacity 6 amps complete fixed on pole with and including suitable size ms flat iron clamps, nuts, bolts & washers etc complete all as specified and directed. 132 m&l for pcc ( 1:3:6 ) type b1 using ( 20 mm graded aggregatefor pole copingcomplete all as specified and directed. 133 earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground ( earth pit not less than 2.25 metres deep below ground level ) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. 134 supply and fix exhaust fanmetal body ac single phase 230 / 240v of size 300 sweep with louver complete all specified and directed.note: cost of louver and its fixing included in quoted rate. 135 m&l for concealed typewiring for one light / fan / exhaust fan / bell point controlled by one switch with1.5 sqmm ( nominal area ) pvc insulated, unsheathed, stranded copper, conductor cable ( 1100volts grade ) frls, isi marked, drawn in and includingrigid pvc conduits , 20 / 25mm dia all as directedwithall fittings and accessories alongwith pvc insulated cable with solid copper conductor of size 1.5 sqmm as earth continuity conductor including fixing of2mm thick ms sunk terminal boxdulyflushed to wall with 3mm thick plastic laminated sheet cover fixed with brass screws, cap and washers incl. making good the disturbed surfaces and matching with existing colour complete all as below: 136 ( a ) one light / fan / exhaust fan point controlled by one switchcomplete all as specified and directed. 137 m & l for hole cutting in wall for fixing of exhaust fan of size 300 mm and good the disturbed surfacres of wallby using putty and match with existing colour of wall complete all as specified and directed.note: cost of repairing work and material ( cement and sand ) included in quoted rate. 138 supply and fix switch piano , flush type single pole , one way5 amp complete all as specified and directed. 139 notes : ...

Northern Railway - Uttar Pradesh

33013636 auction sale of condemned and unserviceable released/ abandoned staff quartersloc abandoned quarters no. t 3 (a e = 5 nos.), t 6 (a c = 3 nos.), t 7 (a b =2 nos.), t 8 (a = 1 nos.), t 9 (a m = 13 nos.), t 10 (a i = 9 nos.), i1 16 (1 nos.), i1 17(1 nos.) of hazratganj colony drm office in the section of sse/w/cb under aden hq lko, total 35 units, with approximate as per attached document 1 released old bricks 898013 nos2 scrap packing wood 20.45 mt3 scrap ferrous melting ?a.steel door 1.93 mtb.steel gate 1.11 mtc.boiler tube gate 0.14 mtd.steel work r.s. joists, channels, angles, tees and flats 25.18 mte.expanded metal or l.r.c. fabrics 1.05 mtf.dismantling gi pipe 15mm dia 0.10 mt4 rail 10.92 mt5 dismantling ci pipe 80mm dia 0.875 mt6 asbestos cement sheet ceiling 182.18 kg7 r.c.c. roof 3.76 cum...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

30039727 supply of material of balance work at bus station, mini bypass, bareilly supply of material of balance work at bus station, mini bypass, bareilly , supply of balance material at mini bypass bus station, bareilly : , supply of cement 50 kg. ( opc ) isi of approved make , supply of tor steel fe500 i.s.i. ( 8mm to 25mm. dia ) , coarse sand ( washed ) , stone grit 20mm. crushed , stone ballast 40mm. crushed , brick ( class m 150 ) , cartage earth for filling in plinth from 14 kms. distence upto site including loading, unloading, watering & compaction complete , supply of electrical flat cable 10mm. sq. isi make , supply & fixing of asbestos cement sheet with nut bolt & purlin complete , supply and fixing of european w / c seat with p.trap & all fitting complete , supply and fixing of wash hand basin with p.trap & all fitting , supply and fixing of p.v.c. pipe 100mm. 6 kgf isi , supply and fixing of cpvc pipe 15mm. with all fitting t&p , supply and fixing of pvc bib cock 15mm. with all t&p , supply and fixing of pvc water storage tank 200 lit. with all t&p , supply and fixing of angle iron door chaukhat with ms sheet door, z section window with ms squre bar grill with all t&p...

Uttar Pradesh Projects Corporation Limited - Uttar Pradesh

29628376 balance work for construction of multipurpose seed store and technology dissemination centre, nanauta, saharanpur balance work for construction of multipurpose seed store and technology dissemination centre, nanauta, saharanpur , earth work in exacavation in foundationsin foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the e/i upto a distance of 30 mt. from the foundation trenches. , earth work in exacavation in foundationsin foundations main building, septic tank & soak pit in ordinary soil depth from 1.5m to 3.0 m i/c all cost of material,labour, t&p etc comp , earth work in filling on inside & campus of building i/c carrige up to 5.00 km with ramming, dressing proper compactioni/c all cost of material,labour, t&p etc complete , sand fillingin plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. , providing and laying in cement concrete1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including cost of form work, in foundation of main building, septic tank & soak pit , providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per i.s.6313 (partii 1981) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : (1) treatment for masonary & foundation 5 liters per sqm. (2) back fill in immediate contact with foundation 7.5 liters/sqm (3) treatment of top surface of plinth filling 5 liters/sqm (4)treatment junction of wall and the floor 7.5 liters /sqm (5) treatment of soil along external perimeter of building 7.5 liters/sqm (6) treatment of soil under apron along external perimter 5 liters/sqm. , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20. but for lintel (using 1:1.5:3 mix concrete f.f) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in slabg.floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20. , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in slabfirst floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20.(using 1:1.5:3 mix concrete) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lighter beam first floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20.i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete ) , r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in column first floor excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, t & p etc. required for proper completion of the works. strength of the concrete shall not beless than m 20..(using1:1.5:3mix concrete). , first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, t & p etc required for proper completion of the work. , first class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar but in super structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. , first class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortarin superstructure for wall thickness 12 cms , providing & filling of brick bats inside of upper layer in soak pit i/c all cost of material, labour, t&p etc comp , providing and laying brick coba 120 mm thick laid with m 150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement & coarse sand mortar finised smooth & top mashed false square 30 cm x 30 cm & side wall parapet shall be mono lythic plaster wall up to 30 cm higherand junction & corner shall be rounded by brick ballast cement & coarse sand masonany coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, t& p etc complete for proper completion of work. , p/f h.y.s.d.bars of grade fe 500conforming to is:1786 2006 work such as reinforced concrete to required proper shape as necessary &its wastage including straightening, cutting,bending,binding placing in position for proper completion of the work and including supply of steelbend hooks and authorised over lapping shall be measured upto floor two level. , providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :(i)32 mm thick single leaf , (ii) 32 mm thick double leaf , mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (i)fabrication of holdfast for door, chaukhats and windows. , providing & fabrication of m.s. grill ondoor / windows , providing & fabrication ofz section steel windows with openable panels, excluding glass panes. , providing & fabrication ofangle iron chaukhat (40x40x5mm) , supply and fixing galvanized mosquitos proof heavy quality s.s.wire gaugeheavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, tools & plants etc. required for proper completion of the work. , fixing of door, windows / ventilators chaukhats in position. (a) door chaukhats , (b) window chaukhats , (c) ventilator chaukhats , 15 mm thick cement plaster with cement mortar in proportion of 1:4 cement & coarse sand. , 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6coarse sand , 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80mm in girth & finshed even & smooth. (1) 1 cement : 6 coarse sand , 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth.in 1:3 (septic tank) , making grooves 10 to 12mmwide 8mm deep in plaster of the walls or in ceiling vertically or horizontally as required. , providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size on floor with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. , providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size on skirting with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. , kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick , kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. , supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. , painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3 apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour, t & p etc. required for proper completion of the work. , painting two coat over priming coat (but including cost of priming coat) on wooden surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3 apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour, t & p etc. required for proper completion of the work. , finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). , distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger,j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. , providing & fixing stainless steel sliding door bolts isi markedto required colour or shade with nuts and screws etc complete.(a) 250mm x 16mm , p/fixing stainless steel tower bolts isi marked to required colour or shade with necessary screws etc.(a) 250 mm x 10mm , providing & fixing stainless steel handles isi marked to required colour or shade with necessary screws etc. complete. 125 mm , providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete , providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) , providing & laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. this layer will be allowed to air cure for 4 hours. b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment & all corners, junctions of pipes with polymer mixed slurry. , chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).ordinary cement without any pigment , providingandfixingof iron(i)rolling shutter complete , (ii) spring wire 27.5 cm long grade 2 for shutter , (iii) top cover for rolling shutter , (iv)ball bearing for rolling shutter , providing and fixing water closet squatting pan (european type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: , providing & fixing white vitreous china wash basin with c.i. brackets painted white, 15mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mmc.p. brass waste of standard pattern includingcutting & making good the walls wherever required. ( a)flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap. , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern , providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete.a) 32mm dia , (b)40mm dia , providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c.p. brass screws and washers. , providing and fixing 45 cm long unplasticised pvc connection pipe with brass unions.(a) 15mm nominal bore , providing & fixing cp brass bib cock of approved quality conforming to is 8931 (a) 15mm nominal bore , providing & fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gmsa) 15mm nominal bore. , providing & fixing c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is 8931a) 15mm nominal bore , providing and fixing c.p. brass shower rose with 15 or 20 mm inlet 150 mm diameter , providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931 15 mm nominal bore , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter , (ii) 75 mm diameter , providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion coupler (i) 75 mm , (ii) coupler 110 mm , (iii) single tee with door 75x75x75 mm , (iv) single tee with door 110x110x110 mm , (v) single tee without door 75x75x75 mm , (vi)single tee without door 110x110x110 mm , (vii) bend 87.5°degree 75 mm dia , (viii) bend 87.5°degree 110 mm dia , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (i)110 mm dia , (ii) 75 mm dia , providing & fixing soil, wast and vent pipe.75 mm dia sand cost iron s&s pipe. , providing & fixing sand cost iron terminal guard 75 mm dia. , providing & fixing c.i. tee at the inlet & outlet of septic tank. , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion,(i) single socketed pipes 110 mm diameter , providing and fixing on wall face unplasticised pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion bend 87.5°degree (i) 110 mm , (ii) shoe (plain)110 mm shoe , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over p.v.c. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete , providing and fixinggi pipes complete with gi fittings and clamps, including cutting and making good walls etc. (internal work).exposed on wall (i)15mm dianominal bore , 20mm dianominal bore , 25mm dia nominal bore , painting gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. (i)15mm dia nominal bore , (ii) 20mm dia nominal bore , (iii) 25mm dia nominal bore , excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. (a) pipes 80mm to 300mm diameter. , providing, laying and joining glazed stone ware pipes grade awith stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100mm diameter , (ii) 150mm diameter , providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround s.w. pipes including bed concrete as per standard design. a) 100mm diameters.w. pipe , 150mm diameters.w. pipe , providing and fixing square mouth s.w. gully trap grade a complete with c.i. grating brick masonry chamber with f.p.s. bricks of class designation 75 and water tight c.i. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.(a) 150 x 100 mm. size p type , constructing brick masonry manhole with 75 class designation f.p.s. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) rcc top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.a) inside size 90x80 cm & 45 cm deep including c.i. cover with frame (light duty) total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg & wt. of frame 15 kg. , supply & fixing of medium quality r.c.c. manhole coverwith frame complete.(i)hd. 20 circular shape ,560 int. dia. , (ii) m.d. 10 square shape ,450 int. dia. , supplyfixingand concealing of20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work .( for telephone/t.v.points) , s/f of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16swgm.s. sheet incorporating 10mm dia, m.s. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the r.c.c. roof before concreting along with supply of all materials, labour t & p etc., for proper completion of work , construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, t & p etc. required for proper completion of work.600x480x200 mm. size , supply and fixing of factory fabricated m.s. box in existing sunk with godrej type almirah cover with handle etc. fabricated from 18 swg m.s. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and dp/tpn; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and t & p etc. required for proper completion of the work.600x480x200 mm. size , supply and fixing of flush/surface mounting distribution boardswithout mcb with additional metal doorcomplete in all respects.6 way tpn cat a...

Ordance Factory Board - Uttar Pradesh

27813146 tender for cleaning and repairing and other related civil repair works of valley gutters, rcc roofs, asbestos cement sheet & cgi sheets of shops, store bldgs and offices inside factory at ofc, kanpur...

Uttar Pradesh Rajya Nirman Sahkari Sangh Limited - Uttar Pradesh

22399214 supply work construction of veterinary hospital bulding residetial non residetial umari distt auraiya supply work , orissa pattern w . c . pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement . , a ) providing & fixing white vitreous china wash basin with c . i . brackets painted white , 15mm c . p . brass pillar taps , c . p . brass chain with rubber plug , 32mm c . p . brass waste of standard pattern including flat back wash basin size 550x400 mm with single 15mm c . p . brass pillar tap . , providing and fixing flexible p . v . c . waste pipe for sink or wash basin including pvc waste fittings complete . a ) 32mm dia , providing and fixing flexible p . v . c . waste pipe for sink or wash basin including pvc waste fittings complete . b ) 40mm dia , providing & fixing 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c . p . brass screws and washers . , providing & fixing ptmt towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour . 600 mm . long towl rail length of 645 mm . width 78 mm . and effective height of 88 mm , weighing not less than 190 gms . , providing & fixing ptmt towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour . 600 mm . long towl rail length of 645 mm . width 78 mm . and effective height of 88 mm , weighing not less than 190 gms . a ) 100mm dia centrifugally cast iron s & s pipe . , providing & fixing ptmt towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour . 600 mm . long towl rail length of 645 mm . width 78 mm . and effective height of 88 mm , weighing not less than 190 gms . b ) 75mm dia centrifugally cast iron s & s pipe . , providing and fixing coller sand cast iron . 100mm dia sand cast iron s&s pipe , providing and fixing coller sand cast iron . 75mm dia sand cast iron s&s pipe , providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters . a ) 100mm , providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters . b ) 75mm , providing & fixing m . s . holder bat clamps of approved design to sand cast iron / cast ( spun ) iron s & s pipe embeded in & including cement concrete blocks 10x10x10cm . of 1:2:4 mix ( 1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size . including cost of cutting holes & making good the walls etc . a ) for 100mm dia pipe . , providing & fixing m . s . holder bat clamps of approved design to sand cast iron / cast ( spun ) iron s & s pipe embeded in & including cement concrete blocks 10x10x10cm . of 1:2:4 mix ( 1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size . including cost of cutting holes & making good the walls etc . b ) for 75mm dia pipe . , providing & fixing sand cast iron s and s bend of required degree with access door insertion rubber washer 3mm thick , bolts and nuts complete . a ) 100mm dia . , providing & fixing sand cast iron s and s bend of required degree with access door insertion rubber washer 3mm thick , bolts and nuts complete . b ) 75mm dia . , providing and fixing plain cast iron s & s sanitary bend . a ) 100mm , providing and fixing plain cast iron s & s sanitary bend . b ) 75mm , providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams . , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron , finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement , punning , rounding the edges and making and finishing the outlet complete . , providing & fixing sand of grading zone v or coaser grade alround the g . i . pipes in external work . a ) 50mm nominal bore . , providing & fixing sand of grading zone v or coaser grade alround the g . i . pipes in external work b ) 32mm nominal bore ....

Uttar Pradesh Rajya Nirman Sahkari Sangh Limited - Uttar Pradesh

22155548 construction of model multipurpose seed at bhetua , model multipurpose seed store & technology dissemination centre , sanitary fixtures & accessories : i providing & fixing white vitereous china water closet squatting pan isi marked ( indian type w . c . pan ) with 100mm sand cast iron p or s trap , 10/12 . 5 litrs pvc low level flushing cistern with fittings & brackets 40mm dia c . p . flush pipe with fitting & clamps , 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design , painting wherever required including cutting & making good the walls & floors where required . orissa pattern w . c . pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement . , same as above but for european type w . c . pan with black plastic seat and lid . make cera , hindustan . , providing & fixing white vitreous china wash basin with c . i . brackets painted white , 15mm brass pillar taps , brass chain with rubber plug , 32mm brass waste of standard pattern including cutting & making good the walls wherever required . a ) flat back wash basin size 550x400 mm with single 15mm brass pillar tap . , providing & fixing 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c . p . brass screws and washers . , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and c . p . brass spreaders with brass unions and g . i . clamps complete , including painting of fittings and brackets , cutting and making good the walls . a ) two urinal basin with 5 litre white p . v . c . automatic flushing cistern , providing and fixing flexible p . v . c . waste pipe for sink or wash basin including pvc waste fittings complete . 32 mm dia ( for wash basin ) , 40 mm dia ( for sink and urinal ) , soil waste & vent pipes and fittings ii providing & fixing soil , waste and vent pipes . a ) 100mm dia centrifugally cast iron s & s pipe . , b ) 75mm dia centrifugally cast iron s & s pipe . , providing lead caulked joints to sand cast iron/centrifugally cast ( spun ) iron pipes & fittings of diameters . 100 mm , 75 mm , providing & fixing m . s . holder bat clamps of approved design to sand cast iron/cast iron ( spun ) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) . including cost of cutting holes&making good the walls etc . for 100 mm dia pipe , for 75 mm dia pipe , providing & fixing sand cast iron s&s trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete , including cost of cutting & making good the walls and floors . 100 mm linlet & 100 mm outlet , 100 mm linlet & 75 mm outlet , providing & fixing sand cast iron s & s coller 100 mm dia , 75 mm dia , providing & fixing sand cast iron s & s bend of required degree with access door insertion rubber washer 3 mm thick , bolts & nuts complete . 100 mm dia , 75 mm dia , providing & fixing plain sand cast iron s & s bend of required degree . 100 mm dia , providing & fixing heel rest sand cast iron s & s sanitary bend . 100 mm dia , providing & fixing single equal plain sand cast iron s&s junction of required degree with access door , insertion rubber washer 3 mm thick bolts & nuts complete . 100 * 100 * 100 mm , 75 * 75 * 75 mm , providing & fixing of sand cast iron terminal guard . 100 mm dia , 75 mm dia , painting sand cast iron/centrifugally cast ( spun ) iron pipes & fittings with paint of any colour over a coat of primer of approved quality . ( for new work ) 100 mm , 75 mm , providing & fixing ptmt towelrail complete with c . p . brass brackets fixed to wooden cleats with c . p . brass screw 450mm . long with total length of 495mm , width 78mm and effective height of 88mm , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes . a ) 110 mm diameter , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs , screwed with m . s . screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall . a ) 110mm , water supply pipes and fittings iii providing & fixing g . i . pipes complete with g . i . fittings & clamps including cutting & making good the walls etc . exposed on wall . ( internal work ) a ) 25mm dia nominal bore ( medium duty ) , b ) 15mm dia nominal bore , c ) 20mm dia nominal bore , painting g . i . pipes and fittings with synthetic enamel white paint over a ready mixed priming coat , both of approved quality . a ) 25mm dia nominal bore . , c ) 15mm dia nominal bore . , d ) 20mm dia nominal bore . , providing and fixing 45 cm long unplasticised pvc connection pipe with brass unions . a ) 15mm nominal bore , providing & fixing brass bib cock of approved quality conforming to is 8931 a ) 15mm nominal bore , providing & fixing c . p . brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms . a ) 15mm nominal bore , providing and fixing ball valve ( brass ) of approved quality complete . ( high or low pressure with plastic floats ) . a ) 20 mm . nominal bore , providing and fixing gun metal gate valve with wheel of approved quality . a ) 25mm dia nominal bore , providing and placing on terrace ( at all floor levels ) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank . capacity 2000 litre , providing and fixing brass stop cock of approved quality . a ) 15 mm nominal bore , b ) 20 mm nominal bore , schedule of quantities for external sewerage system iv excavating trenches in all kind of soil of required width for pipes , cables etc . including excavation for sockets and dressing of sides , ramming of bottoms , depth upto 1 . 5 m . including getting out the excavated soil & then returning the soil as required , in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming , watering , etc & disposig of surplus excavated soil as directed within a lead of 50m . a ) pipes 80mm to 300mm diameter . , providing , laying and joining glazed stone ware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc . complete . a ) 100mm diameter , providing & laying cement concrete 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround s . w . pipes including bed concrete as per standard design . a ) 100mm diameter s . w . pipe , constructing brick masonry manhole with f . p . s . bricks in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) rcc top slab with 1 : 2 : 4 mix ( 1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size ) ; foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) finishd with a floating coat of neat cement complete as per standard ...

Uttar Pradesh Rajya Nirman Sahkari Sangh Limited - Uttar Pradesh

22155546 construction of model multipurpose seed at gauriganj , model multipurpose seed store & technology dissemination centre , sanitary fixtures & accessories : i providing & fixing white vitereous china water closet squatting pan isi marked ( indian type w . c . pan ) with 100mm sand cast iron p or s trap , 10 / 12 . 5 litrs pvc low level flushing cistern with fittings & brackets 40mm dia c . p . flush pipe with fitting & clamps , 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design , painting wherever required including cutting & making good the walls & floors where required . orissa pattern w . c . pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement . , same as above but for european type w . c . pan with black plastic seat and lid . make cera , hindustan . , providing & fixing white vitreous china wash basin with c . i . brackets painted white , 15mm brass pillar taps , brass chain with rubber plug , 32mm brass waste of standard pattern including cutting & making good the walls wherever required . a ) flat back wash basin size 550x400 mm with single 15mm brass pillar tap . , providing & fixing 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c . p . brass screws and washers . , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and c . p . brass spreaders with brass unions and g . i . clamps complete , including painting of fittings and brackets , cutting and making good the walls . a ) two urinal basin with 5 litre white p . v . c . automatic flushing cistern , providing and fixing flexible p . v . c . waste pipe for sink or wash basin including pvc waste fittings complete . 32 mm dia ( for wash basin ) , 40 mm dia ( for sink and urinal ) , soil waste & vent pipes and fittings ii providing & fixing soil , waste and vent pipes . a ) 100mm dia centrifugally cast iron s & s pipe . , b ) 75mm dia centrifugally cast iron s & s pipe . , providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters . 100 mm , 75 mm , providing & fixing m . s . holder bat clamps of approved design to sand cast iron / cast iron ( spun ) pipe embedded in & including cement concrete blocks 10*10*10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) . including cost of cutting holes&making good the walls etc . for 100 mm dia pipe , for 75 mm dia pipe , providing & fixing sand cast iron s&s trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete , including cost of cutting & making good the walls and floors . 100 mm linlet & 100 mm outlet , 100 mm linlet & 75 mm outlet , providing & fixing sand cast iron s & s coller 100 mm dia , 75 mm dia , providing & fixing sand cast iron s & s bend of required degree with access door insertion rubber washer 3 mm thick , bolts & nuts complete . 100 mm dia , 75 mm dia , providing & fixing plain sand cast iron s & s bend of required degree . 100 mm dia , providing & fixing heel rest sand cast iron s & s sanitary bend . 100 mm dia , providing & fixing single equal plain sand cast iron s&s junction of required degree with access door , insertion rubber washer 3 mm thick bolts & nuts complete . 100 * 100 * 100 mm , 75 * 75 * 75 mm , providing & fixing of sand cast iron terminal guard . 100 mm dia , 75 mm dia , painting sand cast iron / centrifugally cast ( spun ) iron pipes & fittings with paint of any colour over a coat of primer of approved quality . ( for new work ) 100 mm , 75 mm , providing & fixing ptmt towelrail complete with c . p . brass brackets fixed to wooden cleats with c . p . brass screw 450mm . long with total length of 495mm , width 78mm and effective height of 88mm , providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion . ( i ) single socketed pipes . a ) 110 mm diameter , providing and fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs , screwed with m . s . screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall . a ) 110mm , water supply pipes and fittings iii providing & fixing g . i . pipes complete with g . i . fittings & clamps including cutting & making good the walls etc . exposed on wall . ( internal work ) a ) 25mm dia nominal bore ( medium duty ) , b ) 15mm dia nominal bore , c ) 20mm dia nominal bore , painting g . i . pipes and fittings with synthetic enamel white paint over a ready mixed priming coat , both of approved quality . a ) 25mm dia nominal bore . , c ) 15mm dia nominal bore . , d ) 20mm dia nominal bore . , providing and fixing 45 cm long unplasticised pvc connection pipe with brass unions . a ) 15mm nominal bore , providing & fixing brass bib cock of approved quality conforming to is 8931 a ) 15mm nominal bore , providing & fixing c . p . brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms . a ) 15mm nominal bore , providing and fixing ball valve ( brass ) of approved quality complete . ( high or low pressure with plastic floats ) . a ) 20 mm . nominal bore , providing and fixing gun metal gate valve with wheel of approved quality . a ) 25mm dia nominal bore , providing and placing on terrace ( at all floor levels ) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank . capacity 2000 litre , providing and fixing brass stop cock of approved quality . a ) 15 mm nominal bore , b ) 20 mm nominal bore , schedule of quantities for external sewerage system iv excavating trenches in all kind of soil of required width for pipes , cables etc . including excavation for sockets and dressing of sides , ramming of bottoms , depth upto 1 . 5 m . including getting out the excavated soil & then returning the soil as required , in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming , watering , etc & disposig of surplus excavated soil as directed within a lead of 50m . a ) pipes 80mm to 300mm diameter . , providing , laying and joining glazed stone ware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc . complete . a ) 100mm diameter , providing & laying cement concrete 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround s . w . pipes including bed concrete as per standard design . a ) 100mm diameter s . w . pipe , constructing brick masonry manhole with f . p . s . bricks in cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) rcc top slab with 1 : 2 : 4 mix ( 1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size ) ; foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) finishd with a floating coat of neat cement complete as per standa...

Uttar Pradesh Jal Nigam - Uttar Pradesh

20801635 supply of building material of govt. inter college at sonaura bujurg tahsil campierganj district gorakhpur u.p.=> open tender providing & fixing white vitereous china water closet squatting pan isi marked ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 / 12.5 litres pvc low level flushing cistern with fittings and brackets 40mm dia c.p. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls and floors where required, providing and fixing white vitreous china wash basin with c.i. brackets painted white, 15mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including cutting and making good the walls wherever required, providing and fixing flexible pvc waste pipe for sink or wash basin including pvc waste fittings complete, providing and fixing 600x450mm beveled edge mirror of superior glass ( of approved quality ) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c.p. brass screws and washers, providing and fixing white vitreous china laboratory sink with c.i. brackets cp brass chain with rubber plug 40mm cp brass waste and 40mm cp brass trap with necessary cp brass union complete including painting of fitting and brackets, cutting and making good the wall wherever required, providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and cp brass spreaders with brass unions and g.i. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, ...

University Of Allababad - Uttar Pradesh

20667506 tender for 1. repairing, internal and external painting work, 2. repairing and painting and changing of asbestos cement sheet at cricket stadium ground, science faculty....

Uttar Pradesh Rajya Nirman Sahkari Sangh Limited - Uttar Pradesh

20366691 supply of remaining materials at pashu chikitsalaya bhitargaon kanpur 56 providing white vitereous china water closet squatting pan isi marked (indian type w.c. pan) with 100mm sand cast iron p or s trap, 10/12.5 litrs pvc low level flushing cistern with fittings & brackets 40mm dia c.p. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required orissa pattern w.c. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement. 57 providing white vitreous china wash basin with c.i. brackets painted white, 15mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standard pattern including a) flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap. 58 providing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete. a) 32mm dia 59 b) 40mm dia 60 providing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c.p. brass screws and washers. 61 providing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required :size 450x300x150 mm 62 providing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete.semi rigid pipe a) 32mm dia 63 providing ptmt towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. => open tender...

Military Engineer Services - Uttar Pradesh

18954252 replacement of asbestos cement sheets of roof false celing brick work etc under age br ii of ge west agra, replacement of asbestos cement sheets of roof...

Government Of Uttar Pradesh - Uttar Pradesh

17132360 supply of labour work with material only construction of veterinary hospital building ( non residential ) at patla distt. ghaziabad, 1.52 a ) flat back wash basin size 550x400 mm with single 15mm c.p. brass pillar tap. 1.53 providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete. 1.54 a ) 32mm dia 1.55 b ) 40mm dia 1.56 providing & fixing 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with c.p. brass screws and washers. 1.57 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : 1.58 size 450x300x150 mm 1.59 providing and fixing flexible p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete. 1.6 semi rigid pipe 1.61 a ) 32mm dia 1.62 providing & fixing ptmt towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. 1.63 providing and fixing ptmt liquid soap container 109 mm wide , 125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms 1.64 providing & fixing soil, waste and vent pipes. 1.65 a ) 100mm dia centrifugally cast iron s & s pipe. 1.66 b ) 75mm dia centrifugally cast iron s & s pipe. 1.67 providing lead caulked joints to sand cast iron / centrifugally cast ( spun ) iron pipes & fittings of diameters. 1.68 a ) 100mm 1.69 b ) 75mm...

Indian Veterinary Research Institute - Uttar Pradesh

11311745 purchase durable polycarbonate plastic & other roofing material: 1. durable polycarbonate plastic roofing sheets, sun reflective properties, ultraviolet protection area=900sq. ft. asbestos cement sheets no. of sheets 50 g.i pipe ( class b ) , diameter of pipe =80 / 60mm ( length 18 ft. ) g.i pipe ( class b ) , diameter of pipe =40mm ( length 18 ft. ) g.i socket nut bolt, washer, wielding rods and accessory & fitting devices for installation of roofing material...