North Central Railway - Uttar Pradesh

39197238 supply of set of bituminous paints. ( 1 ) bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. ( 2 ) bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. ( 3 ) bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs ( three items=1 set. spec. modified as per crws bpl letter no. 28 / l / 77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. specn: irs / spec.no.p 29 / 68. [ warranty period: 30 months after the date of delivery ] => limited...

North Central Railway - Uttar Pradesh

38704772 supply of set of bituminous paints. ( 1 ) bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. ( 2 ) bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. ( 3 ) bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs ( three items=1 set. spec. modified as per crws bpl letter no. 28 / l / 77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. specn: irs / spec.no.p 29 / 68. [ warranty period: 30 months after the date of delivery ] => limited...

North Central Railway - Uttar Pradesh

38529123 supply of set of bituminous paints. ( 1 ) bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. ( 2 ) bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. ( 3 ) bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs ( three items=1 set. spec. modified as per crws bpl letter no. 28 / l / 77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. specn: irs / spec.no.p 29 / 68. [ warranty period: 30 months after the date of delivery ] => limited...

Uttar Pradesh Jal Nigam - Uttar Pradesh

37174952 reorganisation works of water supply scheme including survey, design, supply of all materials, labour t&p complete in all respect on turn key basis after completion, commissioning and completion of trial & run with defect liability period of works including har ghar jal certificate & handing over to gram panchayat for distt. jhansi under jal jeevan mission programme mentioned as under ( package 4 ) . 1 ramnagar water supply reorganisation scheme 2 laying of rising main 3 supply, laying & jointing of following sizes ( d.i. k 9 ) pipes for rising / feeder main conforming to latest / relevant i.s. 8329 / 2000 specifications with all jointing materials such as d.i. s / s or flanged specials conforming to latest / relevant i.s. specifications with rubber gasket also, suitable for d.ipipes, as per is 8329 / 2000 or their latest amendment including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignmentand gradient and jointing and making inte connection etc. complete ( including hydro testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches ) .all required for proper completion of works as per direction of the engineer. 4 100 mm dia di k 9 5 150 mm dia di k 9 6 supply up to site of work of the following dia double flange sluice valve / scour valve confirming for is 14846 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respect and also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge 7 100mm 8 150mm 9 supply up to site of work of the following dia swiss check type non return ( reflux ) valve confirming for is 5312 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respectand also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge 10 100mm 11 150mm 12 providing and supplying kinetic double orifice type air valves confirming to is 14845 specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, loading, unloading, transportation upto stores in all respect etc. complete as per instructions of engineer. 13 20mm dia 14 excavation in soil mixed with moorumsingle, kankar and bazari for pipe line trenches with lift upto 1.50m and lead upto 50m including disposal of surplus earth within a distance of 50 m from center of trenches also including filling back with watering and ramming of excavated earth in to trenches 15 same as above but excavation in all type of rock 16 thrust block 17 r.c.c. with cement, coarse sand and 20mm gauge stone ballast in proportion of1:2:4 in thrust blocks of pipe line excluding supply of reinforcement & its bending the same with 0.50mm thick binding wire in position & necessary centering and shuttering including curing and supply of all materials, labour, t&p etc. required for proper completion of the work. 18 construction of following type chambers as per department type design and drawing including heavy duty r.c.c. manhole cover and all materials, labour, t&p etc. complete for proper completion of work as per instructions of engineer 19 sluice valve chambers ( masonry type ) 20 air valve chambers ( masonry type ) 21 dismantling and reinstatement of following type of village road for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. 22 bitumen road 23 over head tank 24 construction of 75 kl / 16 m staging height over head tank as mentioned below. supply of all materials labour t&p etc. compete and construction of r.c.c. ( m30 grade ) with main components, instrumentsincluding cost of soil testing.all the components of o.h.t. will be casted in m30 concrete with cement, coarse sand and approved stone grit as per i.s. 11682 and i.s.456.seismic effects and wind load should be taken into consideration as i.s. 1893 for earthquake resistance and i.s. 875 part iii for wind load on structure ( this area is in seismic zone iii and high damage risk zone for wind ) proper ventilator at top dome in circular shape along with an r.c.c. coverand thickness, pillar of ventilator should be minimum 50 cm height. the space between top dome and r.c.c. cover should be covered with mosquito net of standard quality alongwith expanded metaled jali, ultrasonic type water level indicator and em flow meter and residual chlorine sensor / transmitter. the indicator board scale made of 3mm thick m.s. plate should have a clear width of minimum 25cm painted with good asian paint.it should also consists of 3mm brass wire rope minimum 4 smooth pulleys about 8 cm dia with guides, 15cm dia copper ball float which shall be completely water tight suitable pointer of brass etc.lightening conductor as per i.s.s.2309 of its latest amendments of latest electricity rules.it should consist proper elevation rod with 5 or more fork points proper down conductors of prescribed metal of proper size prescribed by iss 2309 1969 and iss 3013 1966c.i. manhole of min 60x60cm size made of m.s.channel section with adequate cover made of m.s. sheet of minimum 3mm thickness hinged with manhole with locking arrangement. this manhole should be fix at top dome at proper place.supply, fixing, jointing of following size of d.i.d / f pipes with d.i.d / f specials conforming to is 8329 / 2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant i.s. specificationswith all jointing materials for proper completion of work including other appurtenant works and excavation in all types of soil. including out let pipe as max size of distribution system, inlet pipes size as rising main size, over flow pipe as minimum rising main size & wash out pipe 100 mm dia. supply and fixing of manually operated valves / sluice valves with hand wheels as per iss 700 / 1969 or its latest amendments class “a” working pressure 10 kg / cm2 including cartage from its store to the site of work, lowering them into trenches, fixing in position and testing etc. complete, construction of bed blocks in 1:2:4 pcc with cement, coarse sand and approved stone grit under no duck foot bend to support the vertical pipes. these bed blocks should supported on the raft not on the soil.construction of sluice valve chamber for above sluice valve / butterfly valve as per departmental type design and drawing including supply of all labour t&p complete. construction of washout / overflow chamber as per departmental type design and drawing.painting of all concrete surface and steel pipe works with threecoats appex ( exterior emulsion ) painting over a base coat of birla white puttyand anticorrosive paints.supply & laying of 200 mm dia pvc pipe as per i.s. 4985 / 2000 or as latest / relevant specification including all taxes and insurance etc.f.o.r. destination for disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches. laying of pipe line etc. required for proper completion of works as per direction of the engineer. 25 clear water reservoir 26 detailed survey, design and drawing, construction of semi sunkrcc cwr ( circular as per site condition ) of 20 kl capacity including free board, fixing of inlet and outlet pipes of suitable sites, fixing of m.s. ladder with railing inside the cwr, r.c.c ramp and stair from gl to roof of cwr, m.h. covers with locking arrangement and ventilators at top and suction chamber, automatic water level indicator, inlet, out let, over flow pipes withpuddle collars, required capacity of sluice valve, sv chambler etc., as per is specifications, including , excavation of foundation in all type of soil and rock for foundation as required with continuous bailing out of water, including cutting of rock with special t&p, making temporary approach roadand refilling of earth around cwr, also development and site clearance as per required. complete including supply of all material , labour , t&p etc. & constructionclear water pump house with suitable height with all door, window, gentry girder with chain pulley to install the pumping plants, openingin slab with steel cage hinged and locking arrangement, apron around cwr and kota stone flooring in pump house and top of cwr, construct pumping plant foundation, fixing of20 mm dia g.i. piperailing 1.0 m height in three rows at top of cwr, supply of all material such as ci pipes , specials etc. labour for construct drainage arrangement for emptying the cwr for cleaning & maintenance etc., painting of all concrete surface 3 coat of approved apex paint , with 2 coatsbirla white putty , painting of pipes with anti corrosive paint, as perdirection of engineer in charge including all complete. 27 construction of single room staff quarter 28 single room staff quarter construction of staff quarter for pump operator, chaukidar, pump attendant as per departmental type design attached with tender documents including excavation in foundation in ordinary soil / kanker / morrum / soft rock / hard rock, pcc 1:4:8 with cement local sand and 40mm gauge ballastfirst class brick work in 1:4 cement and sand mortar, 12 mm thick plaster in 1:6 cement and sand mortar, mild steel or iron work , supply and filling of carted earth up to plinth level , 25mm thick 1:2:4 plain cement concrete floor and 45 cm wide apron with 2 cm gauge stone ballast laid in pannels, finished with 3 mm floating coat of neat cementand 75 mm thick base concrete 1:4:8 , supply and fixing of 3mm thick glass strip of 25 mm width in joint , ms angle iron chaukhat 40x40x5mm size , 40 mm thick isi flush door shesham wood, window shutter , hdpe tank of 500 liter capacity , galvanized mosquito proof heavy quality iron wire gauge 1.50mm mesh over window with wood batten 50x12 mm and emulsion painting in three coat over two coats of birla white puty using approved colour and shade and white washing of ceiling of staff quarters and internal wiring of staff quarter as per direction of eic, construction of septic tank sanitary works with fixtures, pipes etc. and all type of plumbing work in kitchen , bathroom and w / c, with supply of all materials , labours , tools and plants etc all complete as per direction of eic 29 supply and fixing of 3.6 m x 1.50 m ms gate including fabrication and supply of steel and construction of boundary wall pillars of size 1.5mx0.30mx0.30m with ornamental brick work 115mm thk. around rcc, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all material, labour, t&p etc.required for proper completion of work as per instructions of engineer 30 laying of distribution system 31 supply, laying & jointing of following sizes pipes for distribution system conforming to relevent specifications with all jointing materials, specials conforming to latest / relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignmentand gradient and jointing and making inte connection etc. complete ( including hydro testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches ) .all required for proper completion of works as per direction of the engineer. 32 gi medium class 33 65mm dia 34 80mm dia 35 di class k 7 36 100mm dia 37 excavation in soil mixed with moorumsingle, kankar and bazari for pipe line trenches with lift upto 1.50m and lead upto 50m including disposal of surplus earth within a distance of 50 m from center of trenches also including filling back with watering and ramming of excavated earth in to trenches 38 same as above but excavation in all type of rock 39 supply up to site of work of the following dia double flange sluice valve / scour valve confirming for is 14846 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respect and lowering them into the already preparedtrenches, fixing in position and jointingthem with pipelines and testing etc. completeand also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge. 40 d.i.sluice valve 41 80mm dia 42 100mm dia 43 providing and supplying kinetic double orifice type air valves confirming to is 14845 specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, loading, unloading, transportation upto stores in all respect etc. complete as per instructions of engineer. 44 20mm dia 45 construction of following type chambers as per department type design and drawing including heavy duty r.c.c. manhole cover and all materials, labour, t&p etc. complete for proper completion of work as per instructions of engineer 46 sluice valve chambers ( masonry type ) 47 air valveschambers ( masonry type ) 48 dismantling and reinstatement of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. 49 interlocking road 50 bitumen road 51 cc road 52 provision for crossing of nalas, including shifting of telephone cables etc. along the alignment of pipe line etc. complete as per instructions of engineer in charge. 53 provision for crossing of nala ( for upto 5.0 m wide ) 54 making functional household tapped connections ( fhtc ) from distribution line to outer wall of house in 65 to 200 mm nominal dia pvc pipe and 50 mm dia g.i. to 150 mm dia d.i. / g.i. pipe distribution mains ( existing new ) with supply ofg.i. pipe 15 mm ( average 2.00 mtr ) and h.d.p.e. 20 mm ( average 15.00 mtr including specials, brass ferrule, saddle clamp etc. of suitable size, t&p etc. including excavation, laying and jointing for proper completion of work as per instructions of engineer in charge, fixing of ferrule ( 6 mm dia ) of required size. tapping the main, includes the cost of bailing out and subsequent back fill of water main and cost of fitting and specials etc complete and repair of subsequent leakages of joints, fittings and specials during work, also including required repairing of existing pipe line damaged during dimentalling old line connections including dismentaling and reinstatement of any type of road such as cc, interlocking, boe or bitumen road. uploading of photographs of running fhtcwith aadhar no. ( also submit xeror copy of aadhar card to the department ) of benificiery on www.ejalshakti.gov.in site ( imis ) and submiting of hard copy of photographs to the department. 55 renovation of existing structures 56 repair work of existing structures ( such asboundary wall of w / w campus and pump house ) such as repair of slab, dismentalling of damaged old plaster and replaster of thewalls inner and outer face in proportion 1:6 ( cement: sand ) with 12mm thick plaster cement and local sand mortar in 1:6, over existing brick work, with minimum thickness not be less than 12mm including supply of all materials, labour, t&p etc. required for proper completion of the work as per site requirement upto satisfaction of engineer in charge. painting of all exposed surface of existing building with two or more coats of approved brand of apex paint over two coat approved brand wall putty including scrapping of old rough paint neatly and homogeneously including supply of all materials, labour, t&p etc. required for proper completion of the work as per site requirement upto satisfaction of engineer in charge and roof treatment including water profing repair works in existing buildings with murga jali in 1:1.5:3 cement concrete of required thickness including supply of all material, labour required for same t&p etc. as per site requirement upto satisfaction of engineer in charge and providing and fixing in position mild steel all panelled doors and window shutters including supply and fixing of material for making door shutters by m.s. sheet 16 gauge including supply and fixing m.s. angle 40x40x6 mm size also including angle iron chaukhat supply & fixing of oxidized iron fittings etc. complete at site as per site requirement upto satisfaction of engineer in charge 57 earth filling work for proper levelling of water work site, in accordance with the contour map and grid map of existing site enclosed, including levelling, dressing, excavation and filling of earth where necessary and also including all labour, materials, t&p etc. required for proper completion of works and also including carriage of earth from within a distance of about 8 km. from the site of works as per instructions of engineer 58 site development ( 1 ) leveling and grading of the treatment plant site up to finished ground level. over flow drains and sewerage of w / w campus. approach / internal roads design for class a loading along with side rains. supply and fixing of fixtures etc. for external electrification along the approach / internal roads and w / w campus complete. 59 pumping plant for 75 kl / 16 m staging over head tank at ramnagar 60 supplyandinstallation of 300lpm 60m headvt pump set with suitablecapacityofvhsmotor included 4.5mtr columnassembly discharge head completein all respect ( 1 w+ is ) . 61 supply and installation of 10 hp starter 62 supplyandinstallation of 100 amp 1 no incomer, 2 nos out going lt control panel. 63 supply and fixing of16 sq.mm 3core copper conductor lt cable 64 sitc of 100mmdiasizemainpiping& valves for deliveryline & commonheader includingband, tee, valve etc complete 65 supply and fixing of10sq.mm 3core copper conductor lt cable 66 electromagnitic flow meter100 mm dia. 67 supply of suitable capacity i.e. 15 kva 3 phase servo voltage stablizerforinputvoltage 240v to500v & outputvoltage 415±6%volts.. 68 supply & fixing of pressure guage 69 supply & fixing of 2 tone4 way motionhot crane 70 internal &extranal electrification of pumphousecompletein all respect 71 supply& fixing electromachanicalchlorinatingplant. 72 supplyandfixing of double pole earthingincluding material for above all completein all respect. electrical equipment. 73 supply & fixing of rubber sheet 74 watch and ward of pumping plant 75 power connection from uppcl without gst: 76 3 phase lt power connection for above scheme 77 sakrar water supply reorganisation scheme 78 laying of rising main 79 supply, laying & jointing of following sizes ( d.i. k 9 ) pipes for rising / feeder main conforming to latest / relevant i.s. 8329 / 2000 specifications with all jointing materials such as d.i. s / s or flanged specials conforming to latest / relevant i.s. specifications with rubber gasket also, suitable for d.ipipes, as per is 8329 / 2000 or their latest amendment including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignmentand gradient and jointing and making inte connection etc. complete ( including hydro testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches ) .all required for proper completion of works as per direction of the engineer. 80 100 mm dia di k 9 81 150 mm dia di k 9 82 200 mm dia di k 9 83 supply up to site of work of the following dia double flange sluice valve / scour valve confirming for is 14846 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respect and also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge 84 150mm 85 200mm 86 supply up to site of work of the following dia swiss check type non return ( reflux ) valve confirming for is 5312 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respectand also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge 87 100mm 88 150mm 89 200mm 90 providing and supplying kinetic double orifice type air valves confirming to is 14845 specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, loading, unloading, transportation upto stores in all respect etc. complete as per instructions of engineer. 91 20mm dia 92 excavation in soil mixed with moorumsingle, kankar and bazari for pipe line trenches with lift upto 1.50m and lead upto 50m including disposal of surplus earth within a distance of 50 m from center of trenches also including filling back with watering and ramming of excavated earth in to trenches 93 same as above but excavation in all type of rock 94 thrust block 95 r.c.c. with cement, coarse sand and 20mm gauge stone ballast in proportion of1:2:4 in thrust blocks of pipe line excluding supply of reinforcement & its bending the same with 0.50mm thick binding wire in position & necessary centering and shuttering including curing and supply of all materials, labour, t&p etc. required for proper completion of the work. 96 construction of following type chambers as per department type design and drawing including heavy duty r.c.c. manhole cover and all materials, labour, t&p etc. complete for proper completion of work as per instructions of engineer 97 sluice valve chambers ( masonry type ) 98 dismantling and reinstatement of following type of village road for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. 99 bitumen road 100 cc road 101 manufacturing, providing and supplying spirally welded / erw / saw / fabricated m. s. pipes ( commercial quality ) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘v’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding gst levied by goi & gom in all respect etc. complete as per is 3589 and is 5504 as applicable as per specifications ( n0 negative tolerance in thickness is permissible ) etc. required for proper completion of the work along with horizontal directional drilling for steel duct / pipes : installation of steel product pipe by hdd method including preparing and setting up the plant and equipment, preparing new pipe / work material, installing new pipe work and commissioning system or making the system ready for commissioning by capital hdd operation including, all related civil and mechanical works like excavation, shoring / strutting, etc. drilling stringing, rimming, and pulling back the new pipe work on the design bore pipe path alignment, proper disposal of drilling fluid and backfill of site after completion all inclusive as per indstt:101 2018: code of practice for horizontal direction drilling technique suiting indian conditions etc. required for proper completion of the work as per instructions of engineer including licence fee to be paid to nhai for granting permission for crossing and laying of pipe across and along the national highway 102 over head tank 103 construction of 175 kl / 20 m staging height over head tank as mentioned below. supply of all materials labour t&p etc. compete and construction of r.c.c. ( m30 grade ) with main components, instrumentsincluding cost of soil testing.all the components of o.h.t. will be casted in m30 concrete with cement, coarse sand and approved stone grit as per i.s. 11682 and i.s.456.seismic effects and wind load should be taken into consideration as i.s. 1893 for earthquake resistance and i.s. 875 part iii for wind load on structure ( this area is in seismic zone iii and high damage risk zone for wind ) proper ventilator at top dome in circular shape along with an r.c.c. coverand thickness, pillar of ventilator should be minimum 50 cm height. the space between top dome and r.c.c. cover should be covered with mosquito net of standard quality alongwith expanded metaled jali, ultrasonic type water level indicator and em flow meter and residual chlorine sensor / transmitter. the indicator board scale made of 3mm thick m.s. plate should have a clear width of minimum 25cm painted with good asian paint.it should also consists of 3mm brass wire rope minimum 4 smooth pulleys about 8 cm dia with guides, 15cm dia copper ball float which shall be completely water tight suitable pointer of brass etc.lightening conductor as per i.s.s.2309 of its latest amendments of latest electricity rules.it should consist proper elevation rod with 5 or more fork points proper down conductors of prescribed metal of proper size prescribed by iss 2309 1969 and iss 3013 1966c.i. manhole of min 60x60cm size made of m.s.channel section with adequate cover made of m.s. sheet of minimum 3mm thickness hinged with manhole with locking arrangement. this manhole should be fix at top dome at proper place.supply, fixing, jointing of following size of d.i.d / f pipes with d.i.d / f specials conforming to is 8329 / 2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant i.s. specificationswith all jointing materials for proper completion of work including other appurtenant works and excavation in all types of soil. including out let pipe as max size of distribution system, inlet pipes size as rising main size, over flow pipe as minimum rising main size & wash out pipe 100 mm dia. supply and fixing of manually operated valves / sluice valves with hand wheels as per iss 700 / 1969 or its latest amendments class “a” working pressure 10 kg / cm2 including cartage from its store to the site of work, lowering them into trenches, fixing in position and testing etc. complete, construction of bed blocks in 1:2:4 pcc with cement, coarse sand and approved stone grit under no duck foot bend to support the vertical pipes. these bed blocks should supported on the raft not on the soil.construction of sluice valve chamber for above sluice valve / butterfly valve as per departmental type design and drawing including supply of all labour t&p complete. construction of washout / overflow chamber as per departmental type design and drawing.painting of all concrete surface and steel pipe works with threecoats appex ( exterior emulsion ) painting over a base coat of birla white puttyand anticorrosive paints.supply & laying of 200 mm dia pvc pipe as per i.s. 4985 / 2000 or as latest / relevant specification including all taxes and insurance etc.f.o.r. destination for disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches. laying of pipe line etc. required for proper completion of works as per direction of the engineer. 104 clear water reservoir 105 detailed survey, design and drawing, construction of semi sunkrcc cwr ( circular as per site condition ) of 100 kl capacity including free board, fixing of inlet and outlet pipes of suitable sites, fixing of m.s. ladder with railing inside the cwr, r.c.c ramp and stair from gl to roof of cwr, m.h. covers with locking arrangement and ventilators at top and suction chamber, automatic water level indicator, inlet, out let, over flow pipes withpuddle collars, required capacity of sluice valve, sv chambler etc., as per is specifications, including , excavation of foundation in all type of soil and rock for foundation as required with continuous bailing out of water, including cutting of rock with special t&p, making temporary approach roadand refilling of earth around cwr, also development and site clearance as per required. complete including supply of all material , labour , t&p etc. & constructionclear water pump house with suitable height with all door, window, gentry girder with chain pulley to install the pumping plants, openingin slab with steel cage hinged and locking arrangement, apron around cwr and kota stone flooring in pump house and top of cwr, construct pumping plant foundation, fixing of20 mm dia g.i. piperailing 1.0 m height in three rows at top of cwr, supply of all material such as ci pipes , specials etc. labour for construct drainage arrangement for emptying the cwr for cleaning & maintenance etc., painting of all concrete surface 3 coat of approved apex paint , with 2 coatsbirla white putty , painting of pipes with anti corrosive paint, as perdirection of engineer in charge including all complete. 106 construction of single room staff quarter 107 single room staff quarter construction of staff quarter for pump operator, chaukidar, pump attendant as per departmental type design attached with tender documents including excavation in foundation in ordinary soil / kanker / morrum / soft rock / hard rock, pcc 1:4:8 with cement local sand and 40mm gauge ballastfirst class brick work in 1:4 cement and sand mortar, 12 mm thick plaster in 1:6 cement and sand mortar, mild steel or iron work , supply and filling of carted earth up to plinth level , 25mm thick 1:2:4 plain cement concrete floor and 45 cm wide apron with 2 cm gauge stone ballast laid in pannels, finished with 3 mm floating coat of neat cementand 75 mm thick base concrete 1:4:8 , supply and fixing of 3mm thick glass strip of 25 mm width in joint , ms angle iron chaukhat 40x40x5mm size , 40 mm thick isi flush door shesham wood, window shutter , hdpe tank of 500 liter capacity , galvanized mosquito proof heavy quality iron wire gauge 1.50mm mesh over window with wood batten 50x12 mm and emulsion painting in three coat over two coats of birla white puty using approved colour and shade and white washing of ceiling of staff quarters and internal wiring of staff quarter as per direction of eic, construction of septic tank sanitary works with fixtures, pipes etc. and all type of plumbing work in kitchen , bathroom and w / c, with supply of all materials , labours , tools and plants etc all complete as per direction of eic 108 construction of boundary wall 109 supply of all materials t&p etc. forconstruction of boundary wall55 m long , 1.5 m high and 115 mm thick boundary wall with 230 mmx 230 mm thick pillar madein brick masonry in 1cement and 4 sand mortar, the spacing between two pillar should not be more than 3.0 m c / c and the depth of foundation should not be less than 0.6 m, at the site of water works, cwr and esr, brick work in super structure and cr stone masonary in 1:4 cement sand mortor below plinth level, rcc plinth beam in 1:2:4 cement, sand and stone grit and exterior emulsion painting in3 coats over base coat of birla white putty as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour t&p etc. for proper completion of work as per instructions of engineer 110 supply and fixing of 3.6 m x 1.50 m ms gate including fabrication and supply of steel and construction of boundary wall pillars of size 1.5mx0.30mx0.30m with ornamental brick work 115mm thk. around rcc, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all material, labour, t&p etc.required for proper completion of work as per instructions of engineer 111 laying of distribution system 112 supply, laying & jointing of following sizes pipes for distribution system conforming to relevent specifications with all jointing materials, specials conforming to latest / relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignmentand gradient and jointing and making inte connection etc. complete ( including hydro testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches ) .all required for proper completion of works as per direction of the engineer. 113 hdpe pipe 114 63mm dia 115 90mm dia 116 di class k 7 117 100mm dia 118 150mm dia 119 200mm dia 120 300mm dia 121 excavation in soil mixed with moorumsingle, kankar and bazari for pipe line trenches with lift upto 1.50m and lead upto 50m including disposal of surplus earth within a distance of 50 m from center of trenches also including filling back with watering and ramming of excavated earth in to trenches 122 same as above but excavation in all type of rock 123 supply up to site of work of the following dia double flange sluice valve / scour valve confirming for is 14846 including worn gear arrangement as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto store, unloading and stacking in all respect and lowering them into the already preparedtrenches, fixing in position and jointingthem with pipelines and testing etc. completeand also including supply of jointing materials etc. complete .including alltaxes and insurance, as per instructions of engineer in charge. 124 d.i.sluice valve 125 80mm dia 126 100mm dia 127 150mm dia 128 200mm dia 129 providing and supplying kinetic double orifice type air valves confirming to is 14845 specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, with built in kinetic features, isolating sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including insurance, loading, unloading, transportation upto stores in all respect etc. complete as per instructions of engineer. 130 20mm dia 131 construction of following type chambers as per department type design and drawing including heavy duty r.c.c. manhole cover and all materials, labour, t&p etc. complete for proper completion of work as per instructions of engineer 132 sluice valve chambers ( masonry type ) 133 air valveschambers ( masonry type ) 134 dismantling and reinstatement of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. 135 interlocking road 136 boe road 137 bitumen road 138 cc road 139 provision for crossing of nalas, including shifting of telephone cables etc. along the alignment of pipe line etc. complete as per instructions of engineer in charge. 140 provision for crossing of nala ( for upto 5.0 m wide ) 141 making functional household tapped connections ( fhtc ) from distribution line to outer wall of house in 65 to 200 mm nominal dia pvc pipe and 50 mm dia g.i. to 150 mm dia d.i. / g.i. pipe distribution mains ( existing new ) with supply ofg.i. pipe 15 mm ( average 2.00 mtr ) and h.d.p.e. 20 mm ( average 15.00 mtr including specials, brass ferrule, saddle clamp etc. of suitable size, t&p etc. including excavation, laying and jointing for proper completion of work as per instructions of engineer in charge, fixing of ferrule ( 6 mm dia ) of required size. tapping the main, includes the cost of bailing out and subsequent back fill of water main and cost of fitting and specials etc complete and repair of subsequent leakages of joints, fittings and specials during work, also including required repairing of existing pipe line damaged during dimentalling old line connections including dismentaling and reinstatement of any type of road such as cc, interlocking, boe or bitumen road. uploading of photographs of running fhtcwith aadhar no. ( also submit xeror copy of aadhar card to the department ) of benificiery on www.ejalshakti.gov.in site ( imis ) and submiting of hard copy of photographs to the department. 142 renovation of existing structures 143 heavy repair due for water tightness, dismantling of unwanted and construction of floor apron and semi circular drain at the ground level all around the tank as per site conditions. floor apron to be provided 0.50 m beyond the outer edge of the balcony, semi circular drain of 200 mm dia all around the o.h.t. flooring consisting of cement concrete with 20mm gauge approved stone grit, coarse sand, cement in proportion of 1:2:4 including dismantling of old repairableall material, labour, t&p etc also repairing of chambers under tank structure as sluice valve chamber, wash out chamber , bye pass chamber and over flow chamber and supply of required for proper completion of the work as per direction and satisfaction of engineer incharge in existing over head tank , supply and fixing ventilator jali at o.h.t. / cwr including repairing of the ventilator and fixing the same properly including supply of all material, labour, t&p etc., supply and fixing of new lightening conductor consisting of elevation rod, down conductor, earth plate complete with marked scale of the o.h.t. including cutting of hole for cleats to fix the same properly and including supply of all material, labour, t&p etc. and fixing the appliances in the cleats with screw or nales etc. all complete, painting of outer surface of oht with 3 coats of approved wheather proof paint ( like apex etc. ) as per departmentalcolour with two coat birla white putty. railing of stair case and balcony with iron post and two raws of g.i. pipe 20mm dias and painting the iron work in small area with one coat of anti corrosive primer coat and two coat of approved enamel paint also writing of programme name with scheme name & tank capacity on tank wall as per direction & up to satisfaction of engineer in charge. 144 repair work of existing structures ( such asboundary wall of w / w campus and pump house ) such as repair of slab, dismentalling of damaged old plaster and replaster of thewalls inner and outer face in proportion 1:6 ( cement: sand ) with 12mm thick plaster cement and local sand mortar in 1:6, over existing brick work, with minimum thickness not be less than 12mm including supply of all materials, labour, t&p etc. required for proper completion of the work as per site requirement upto satisfaction of engineer in charge. painting of all exposed surface of existing building with two or more coats of approved brand of apex paint over two coat approved brand wall putty including scrapping of old rough paint neatly and homogeneously including supply of all materials, labour, t&p etc. required for proper completion of the work as per site requirement upto satisfaction of engineer in charge and roof treatment including water profing repair works in existing buildings with murga jali in 1:1.5:3 cement concrete of required thickness including supply of all material, labour required for same t&p etc. as per site requirement upto satisfaction of engineer in charge and providing and fixing in position mild steel all panelled doors and window shutters including supply and fixing of material for making door shutters by m.s. sheet 16 gauge including supply and fixing m.s. angle 40x40x6 mm size also including angle iron chaukhat supply & fixing of oxidized iron fittings etc. complete at site as per site requirement upto satisfaction of engineer in charge 145 earth filling work for proper levelling of water work site, in accordance with the contour map and grid map of existing site enclosed, including levelling, dressing, excavation and filling of earth where necessary and also including all labour, materials, t&p etc. required for proper completion of works and also including carriage of earth from within a distance of about 8 km. from the site of works as per instructions of engineer 146 site development ( 1 ) leveling and grading of the treatment plant site up to finished ground level. over flow drains and sewerage of w / w campus. approach / internal roads design for class a loading along with side rains. supply and fixing of fixtures etc. for external electrification along the approach / internal roads and w / w campus complete. 147 pumping plant for cwr to cwr 148 supplyandinstallation of 1800lpm 55m headvt pump set with suitablecapacityofvhsmotor included 4.5mtr columnassembly discharge head completein all respect ( 1 w+ is ) . 149 supply and installation of 35 hp starter 150 supplyandinstallation of 200 amp 1 no incomer, 2 nos out going lt control panel. 151 supply and fixing of35sq.mm 3.5 core aluminium conductor lt cable for lt panal 152 sitc of 150mmdiasizemainpiping& valves for deliveryline & commonheader includingband, tee, valve etc complete 153 supply and fixing of16sq.mm 3core copper conductor lt cable for starter 154 electromagnitic flow meter150 mm dia. 155 supply of suitable capacity i.e. 60 kva 3 phase servo voltage stablizerforinputvoltage 240v to500v & outputvoltage 415±6%volts.. 156 supply & fixing of pressure guage 157 supply & fixing of 2 tone4 way motionhot crane 158 internal &extranal electrification of pumphousecompletein all respect 159 supplyandfixing of double pole earthingincluding material for above all completein all respect. electrical equipment. 160 supply & fixing of rubber sheet 161 watch and ward of pumping plant 162 pumping plant for cwr to oht 163 supplyandinstallation of 550lpm pump for 250 kl / 16 m staging oht 164 supplyandinstallation of 550lpm 65m headvt pump set with suitablecapacityofvhsmotor included 4.5mtr columnassembly discharge head completein all respect ( 2w+ is ) . 165 supply and installation of 15 hp starter 166 supplyandinstallation of 200 amp 1 no incomer, 7 nos out going lt control panel. 167 supply and fixing of35sq.mm 3.5 core aluminium conductor lt cable for lt panal 168 sitc of 150mmdiasizemainpiping& valves for deliveryline & commonheader includingband, tee, valve etc complete 169 supply and fixing of16sq.mm 3core copper conductor lt cable for starter 170 electromagnitic flow meter150 mm dia. 171 supply of suitable capacity i.e. 75 kva 3 phase servo voltage stablizerforinputvoltage 240v to500v & outputvoltage 415±6%volts.. 172 supply & fixing of pressure guage 173 supply & fixing of 2 tone4 way motionhot crane 174 internal &extranal electrification of pumphousecompletein all respect 175 supply& fixing electromachanicalchlorinatingplant. 176 supplyandfixing of double pole earthingincluding material for above all completein all respect. electrical equipment. 177 supply & fixing of rubber sheet 178 watch and ward of pumping plant 179 supply and installation of 450 lpm pumps for 175 kl / 20 m staging oht 180 supplyandinstallation of 450lpm 65m headvt pump set with suitablecapacityofvhsmotor included 4.5mtr columnassembly discharge head completein all respect ( 2w+ is ) . 181 supply and installation of 10 hp starter 182 sitc of 150mmdiasizemainpiping& valves for deliveryline & commonheader includingband, tee, valve etc complete 183 supply and fixing of10sq.mm 3core copper conductor lt cable for starter 184 supply & fixing of pressure guage 185 electromagnitic flow meter150 mm dia. 186 supply& fixing electromachanicalchlorinatingplant. 187 supply and fixing of solar light 188 power connection from uppcl without gst : 189 3 phase lt power connection for above scheme...

North Central Railway - Uttar Pradesh

36780681 supply of as per irs specification no. p 29 / 68, supply of set of bituminous paintas per irs specification no. p 29 / 68, supply of set of bituminous paint, as per irs / spec. no. p 29 / 68 set of bituminous paint ( 1 ) bituminous anti corrosive paint black solution brushing type 1st coat qty. 10 ltrs. ( 2 ) bituminous anti corrosive paint black solution brushing type 2nd coat qty. 06 ltrs. ( 3 ) bituminous anti corrosive paint black solution brushing type 3rd coat qty. 06 ltrs. ( 1 set consists of these three items ) . [ warranty period: 12 months after the date of delivery ] => limited...

North Central Railway - Uttar Pradesh

36455935 supply of as per irs / spec. no. p 29 / 68 set of bituminous paint 1 ) bituminous anti corrosive paint black solution brushing type 1st coat qty. 10 ltrs. 2 ) bituminous anti corrosive paint black solution brushing type 2nd coat qty. 06 ltrs. 3 ) bituminous anti corrosive paint black solution brushing type 3rd coat qty. 06 ltrs. ( three item = 1 set ) . [ warranty period: 30 months after the date of delivery ] => limited...

Military Engineer Services - Uttar Pradesh

36277085 provision of borewell in tech area and upgradation of stores at various location at north camp under ge ( af ) bamrauli trial bore well of 200 mm dia size pilot bore through any soil strata including hard stone / boulder by means of directrotary method below ground level complete all as specified & directed by engineer in charge. note: unit rate quoted by tender shall be deemed to include cost of ms pipe and transportation of rig accessories required, developing and testing etc at site of work and removal of the same on completion from the site including necessary supervision and rent charges of rig machine compressor & op unit ( any other t&p not specifically mentioned ) in respective item of sch aand no extra payment shall be admissible on this account. 2 drilling reaming vertical bore 525 mm dia at approved site / location in any type of strata for 250erw casing pipe for various depth as shown below including all works pertaining to boring complete in all respect and all as specified & directed. 3 ( a ) reaming up to 525 mm dia for 60 mtr depth from ground level for casing pipe 250 mm dia. 4 ( b ) reaming up to 525 mm dia for exceeding 60 mtr to 150 mtr for casing pipe of 200 mm dia. 5 supply and assembly including jointing, lowerings and fixing in position erw plain steel pipe ( seamless ) housing pipe 250 mm bore ( nominal dia ) 8.00mm thick and outer dia of pipe 266 mm conforming to is 8110 2000 class 8.1.1 plain end pipe jointed and welded couper ring ( welding shall be done through out the circumference of the pipe and coupler ring both sides all as specified and directed by eic. make : jindal / tata. note : ( a ) length of pipe shall not less than 2.40 mtr except where the pipe length required is less than 2.40m ( b ) effective length shall only be measured and paid. 6 all as per item no 3 above but supply assembling, jointing plain ms pipe ( seamless ) casing 200 mm bore 8 mm thick and outer dia of pipe 216 mm conforming to is 8110 2000 complete and lowering and fixing position after socket reducer of 250x200mm bore. 7 s&f ms strainer ( slotted ) pipe v weired 200 mm bore, 8 mm thick conforming to is 8110 2000 fabricated with pipe or specification mentioned above ( item no 3 ) slot of size 1.55mmx75mm as per is provn uniformly distributed on the surface all as specified. 8 s&f mild steel reducing socket 250mmx200mm dia of suitable length including welding, mild steel strip 40x6mm 2 nos on each joint extended in 75mm on each side all as specified. ( the wall thickness of socket not less than 8 mm thick. 9 s&f wrought iron bail plug 200 mm bore, all as specified. 10 s&f well cap for 266 mm dia housing pipe all as specified and directed. 11 s&f two nos ms flat iron 150 mm x 15 mm housing clamp for holding to 250 mm dia housing pipe with 16mm ms bolt & washers including casting of pcc blocks 1:2:4 type b 1 using 20mm graded stone aggregate of size 1.20 m x 1.00 m including 50mm dia ms pipe 2 nos each 1.5mtr long with cap plug and cap top for filling pea gravel including necessary excavation & each work in any type of soil complete all as specified and directed. 12 m&l for packing pea gravel of size 3 to 5mm natural shape brought direct from river bank and packing around casing pipe to entire depth up to ground level all as specified anddirected. ( length of assembly packed only be measured for payment ) 13 development of tube well by means ofhigh velocity compressored airwith 350 psi air compressor all as specified in is 11189 1985 para 4.2including arrangment for equipment fitting. 14 supply of sodium meta hexa phosphate for disinfecation of bore well all as specified and directed. 15 development of tubewell bymeans of over pumping for subsequent hours until clear discharge as per clause 9.3.2 of is 2800 ( part 1 ) 1991all as specified and directed. 16 supply only strata sample box with glass cover 3mm thick and having internal dimension 1.0 mtr x 0.60 mtr x 0.10 mtr made out of shisham plank 20mm thick with hinges, hasp and staples including polishing complete with samples at various depth met at the time of boring including stata chart in duplicate. 17 chemical bilogical and potability testing of water sample taken from the bore at govt approvedlaboratories. note: test certificate obtained from approved lab will be submitted by the contractor in original. 18 yield testing for bore well by continuous pumping for 16 hrs to determine safe pumping yield of the tube well as perclause 5 of is 2800 ( part ii ) 1979 complete all as specified and directed. 19 electric logging in trial bore precise delineation of granular zones and also the quality of ground water including report interpreatation complete all as specified and directed. note: electric logging shall be carried out by approved agency. 20 s&f air release valve suitable to connect column pipe of rising main flanged and column pipe or submersible pump set compelte with nut, bolt washer etc including grouting 4 bolt on pcc plateform all specified 21 supply, lowering, jointing and testing ms black column pipe 3 mtr long heavy duty 100 mm bore wall thickness 5 mm both ends flanged with heavy duty ms flanged not less than 16 mm screwed and welded in side and outside. the flanged end making surface shall be smooth including welding of 04 strip of 5 mm thick 25 mm wide and 50 mm long covering pipe and flanged, both end flanged having 08 nos predrilled hole not less than 16 mm including rubber gasket, nut bolts and washer, pipe should be duly painted with anti corrosive paint complete all as specified and directed. 22 supply, fixing, jointing and testing of cast iron non return valve 100 mm dia flanged ends as per is 5312 ( isi marked ) complete with washer nuts / bolts and rubber gasket complete all as specified and directed. 23 supply, fixing, jointing and testingof cast iron sluice valve 100 mm class i ( isi marked ) pn 1 typelatest is 14846 2000 flanged ends, drilled having stainless steelspindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etccompleteall as specified and directed. 24 supply, installation, commissioning and testing submersible pumping setmulti stage electric driven of 10 hp capacityat operating head range 10 40 mtr head, directly coupled with electric motor, ac 3 phase, 415 volts, 50 hz, 2900 rpm with copper wound water proof winding complete with flange adoptor suitable for connection with 100 mm dia flanged column pipe and one set of essential tool with price list, literature as recommended by manufacture complete complete all as directed. 25 s&f submersible pump controller in sheet enclosure type mu g20 fully autimaticstar delta starterfor threephase motor 415 volts, 50 hz, 3 phase, 15 hp, 9 14 amps relay range all as specifiedmake : l&t cat part no. :ss95984coaoor equivalent 26 s&f in replacement of pvc insulated flat copper submersible cable heavy duty 16 sqmm 3 core 1100 volt grade of the following size complete all as specified and directed. make havells / plaza / finolex 27 supply and fix high pressure single head adjustable chlorine dosing system including frp pressure dosing tank of capacity 100 ltrs consisting of water inlet line, outlet with y strainer, drian, overflow, conical bottom for sludge deposition , pot hole with cover, level gauage with agitation motor 120 watts 960 rpm, single phase flange mounted motor with plastic shaft and impeller connected to frp service dosing tank of capaicty 100 lts consisting of water inlet line, dozing injector 230v, 50hz including on / off switch and stokes / minute of max 135 min. 15 with motor, discharge pressure 10kg / sqcm, high flow rate of 0 25 lph including drain, overflow level gauge, inspection port, agitator motor 120 watts 960 rpm single phase flange mounted with plastich shaft and impeller including mounting lid, complete all as directed. make: aquafit or equivalant 28 supply & laying in trenches ductile iron ( di ) pipe of size 100 mm bore dia with spigot and socketed ends centrifugally cast class k 7 in any length laid in trenches including di fittings and jointing materails complete all as specified and directed. 29 m&l for 100 mm bore cast iron ( di ) fittings such as bends ( any type, radius and angle ) tapers any type, ( straight, bend, increasing, decreasing or double socket etc ) tee pieces single branch, “y” junction, double branch, cross ( all sockets or socket and spigot ) collars, caps and plugs complete all as specified and directed. 30 supply and lay steel water tubing gi medium grade isi marked with all fittings laid in trenches or fixed to wall etc complete for the following sizes: make: jindal / prakash / swastik note : excavation and earth work will be measured and paid separately. 31 ( a ) 40 mm dia bore 32 ( b ) 25 mm dia bore 33 s&f gun metal gate valve isi marked with iron wheel head screwed both ends for iron pipes and fixed for the following sizes including taking down of unserviceable gate valves. make : zoloto / seico / jindal / upadhaya / venus 34 ( a ) 40 mm bore 35 ( b ) 25 mm bore 36 supply, install, testing and commissioning of busbar chamber of size not less than 60cm x 60cm x 25cm for 3 phase, 415 volts ac, outdoor type, cubical compartmentalised type, weather, vermin and water proof, fabricated out of 2 mm thick crca sheet powder coated front door openable with locking arrangemen and iron angleframe bottom of the panel board including 100 amps mccb , rated copper bus bar, phase indicator , 15 amps switch socket combined , grouted using pcc foundation 1:2:4 type c1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable gland including painting with two coat of powder coated painted over a coat of red oxide primer complele all as specifed and directed. 37 m&l for earthing complete with galvanized steel earth plate 600x600x6mm thick buried directly in ground ( earth ) pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, gi pipe light grade 40mm bore for protection of gi strip from earth electrode to and including the earth test point of galvanised iron / steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate ) chamber and mild steel angle iron frame 40x40x3mm and rcc cover 40mm thick ( 1:2:4 ) type b 1 using 20mm graded crushed stone aggregate reinforced with 8mm dia tmt bars @ 75mm o / o both ways with mild steel handle 12mm dia, pgi funnel with wire mesh, 20 mm dia gi pipe light grade for watering all as shownin electrical plate no.3 of mes ssr part 1 38 supply, laying and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 25 sq mm 4 core all as specified. 39 m&l for boring of holes of 200 mm dia under the road / hard standing by horizontal boring method 2 mtr below the surface for fixing requiste 2 nos. all equipments & machinery required to carry out the work will be provided by the contractor ( if due to any obstruction during boring, reboring has to be done the same will be done by the contractor at his own cost the rates deem to cover the same ) complete all as specified and directed. 40 supply and laying sub class b bricks ( old size ) laid flat in trenches as cable covers all as specified and directed 41 excavation in trenches not exc 1.5 m wide and not exc1.5 m in depth and getting out in soft / loose soil as in foundation all as required and directed 42 m&l for returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as directed. 43 removal excavated material ( soil ) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as directed. 44 m&l for cement concrete 1:2:4 type b 2 ( using 40mm graded stone agg ) 100 mm thick as in floor and finish concrete surface even and smooth without using extra cost, complete all as specified. 45 m&l for cement concrete 1:4:8 type d 2 ( using 40mm graded stone agg ) 100 mm thick as in floor, complete all as specified. 46 m&l for rcc ( m 25 design mix ) ( 20mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concreate etc complete all as specified and directed. 47 m&l for rcc ( m 25 design mix ) ( 20mm graded stone aggregate ) as in columns, pillars, posts and struts etc complete all as specified and directed. 48 m&l for form work to sides of concreate foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams, and similar works vertical or to batter on fair finished surfaces foundation 49 m&l for form work to sides of columns, pillars, posts, struts, piers and stanchions on fair finished surfaces 50 s&f for 10 dia and over mild steel tmt reinforcement bars and spacers cut to length, bent to shape required including cranking, bending, blinding with and including mild steel wire ( annealed ) not less than 0.9 mm dia and necessary welding to reinforcement complete all as specified and directed. 51 s&f for 5 dia and over upto including 10 mm dia mild steel tmt reinforcement bars as in stirrups, spacers and blinders etc complete all as specified and directed. 52 m&l for rendering 10 mm thick in cement mortar ( 1:4 ) on fair faces or brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement. ( note: wpc will be measured and paid seperately ) 53 m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer etc complete all as specified. 54 s&f roof trusses ( framed ) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc complete all as specified and directed. 55 m&l for valve pit chamber of size 1050mm x 1050mm x 1050mm ( internal dimention ) complete including excavation and earth work, pcc 1:4:8, type d 2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 ( internally ) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 56 demolition of cement concrete ( un reinforced ) in ground floors and pavings not exceeding 15cm thickness ( below and above ground level ) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed. 57 m & l for pcc 1:2:4 type b2 using 40 mm graded stone aggregate as in sub base / mass concrete complete all as specified and directed. 58 m & l for 20 to 25 mm thick machine cut kota stone slab flooring, landing, steps and plateformover and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing andgrinding and polishingto achive mirror finish complete all as specified and directed. 59 m & lfor 20 to 25 mm thick machine cut kota stone slab on vertical surfaces such as skirting, risers of step, dado etcover and including 10mm thick bearing plaster in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and granite polishing complete all as specified and directed. 60 s&f framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) andhanging; also fastening and fixing complete 61 m&lfor pcc ( 1:2:4 ) type b 1using20 mm gradedstone aggregates as in filling on holes in walls, bed block for inserting hold fast and copingincluding necessary form workcomplete all as specified and directed. { the rate is deemed to be inclusive of form work } 62 excavation over area, n exc 1.50 mtr deep and getting out in soft loose soil complete all as specified and directed 63 removing excavated soil exc 1.50 km but n. exc 5 km and deposited wherever directed 64 m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed. 65 m&l for pcc 1:2:4 type b 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified as directed. 66 m&l for pcc 75mm thick type c 1 , 1:3:6 using 20mm graded stone aggregate as in plinth protection complete all specifiedas directed. 67 supply onlyglass dividing strips 38 mm wide fixed in floorcomplete all as specified and directed 68 demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. 69 m&l for brick work with sub class b modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete. 70 taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed 71 m&l for 15mm thick rendering in cm 1:3 on surfaces of brick, concrete wall, chajja surface finished even and smooth using extra cement with 2% wpc by weight of cement, appling two coat of polymer modified and cementitious, elastomemric waterproofing coating 1mm thick shall measure and paid seprately under respective item of as supply only complete all as specified and directed 72 supply only liquid water proofing compound 73 m&l for 15mm thick rendering in cm 1:4 on fair faces of brick work, surfaces finished even and faircomplete all as specified and directed 74 m&l for rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3top surfaces finished even and smooth without using extra cement complete all as specified 75 m&l for preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash on ceilingincluding washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . 76 m&l for preparation of new plastered surface of wall and applying three coats of whitewash on surface of wall incl cornice etc complete all as specified and directed 77 m&l for brooming down plastered or unplastered old decoratedsurface of wall incl cornice etc and applying two coat of whitewash complete all as specified and directed 78 taking down chowkhats or frames n. exc 1.5 sqm each ( without taking off shutter from the frame ) complete. 79 all as per srl item no 72but exc. 1.5 sqm but not exceeding 4 sqm each complete. 80 s & f factory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast, complete with glazing bar, dovetailed or welded complete. 81 s & ffactory made steel window with side hung shutter including box type hinges with steel handle, steel peg stay, hold fast complete with ms flat for fixing wire mesh, dovetailed or welded complete . 82 supply only 3 mm thick plain sheet glass / pin headedfigured glass ordinary quality and glazing with oil putty or wooden beads / steel frame in square area n. exc. 0.5 sqm in each pane complete . note : fixing only rate is included in window / door shutter items considered therein 83 supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapplescomplete all as specified and directed 84 s & f 125x60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 85 s&f flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. 86 s & f 35 mm thick of first class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge, etc., ( with sash bars ) size of members of shutters as specified in ssr part i section 8 clause 8.20 ( a ) supplied and fitted to chowkats complete all as specified and directed. 87 s&f ms flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to fe 290 ged e 165 88 m&l for pcc ( 1:3:6 ) type c1 ( using 20mm graded stone aggregate ) as in bed plate for fixing holdfast etc all as specified and directed. 89 s&f aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed. 90 s&f aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames as in repairs all as specified and as directed. 91 s&f aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed. 92 supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b 21 of size 100mm all as specified and as directed. 93 s&f aluminium handles, cast type, anodised of size 100mm all as specified and as directed. 94 s&f 300 mm length aluminium alloy, anodised, sliding door bolts with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mmall as specified and as directed. 95 m&l for preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enammel paint. 96 m&l for preparation of old painted steel surfaces and applying one coat of steel painting complete all as specified and directed. 97 m&l for preparation of new steel surfaces and applying two coat of steel paint including primer on steel surfaces complete all as specified and directed. 98 m&l for surface of any discription not otherwise describedover 10 cm width or girth on new untreated surface with two coats of synthetic enammelled painting over one coat pink primer on wooden surface complete all as spd & directed. 99 s&f in repair rubber bead for wooden door 100 dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed 101 s&f pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 mpa as in roof covering to wall fixed with self tapping screws as specified. 102 taking down carefully aluminium battenpoint, wiring for light / fan / socket / bell or power point including. all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete and making good disturbed surfaces of wall / floor to match with the surroundings of wall / ceiling / floor etc including taking down old light fittings. note : ( i ) contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in mes store yard. ( ii ) quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. ( iii ) decision of ge shall be final and binding in respect of serviceability of fittings / fixture. 103 m & l for point wiring complete with 1.5 sqmm single core pvc insulated frls cable 1100 volts grade with multi stranded copper conductor drawn through new pvc concealed conduit medium grade, isi markedand including provision of 1.5 sqmm pvc insulated copper cable frls as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings: 104 ( a ) one light / fan / bellpoint controlled by one switch single pole one way 105 ( b ) all as per item no 97 here in before butone3 pin 6 amp switch socket out let independent . 106 ( c ) all as per item no 97 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete . 107 all as per item no 97 here in before but using 02 nos. 4.0 sq mm size for main cable and 01 no.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board. 108 supply and fix switch modular flush 6a single pole one way isi marked 109 supply and fix modular sockets 6 amp 2 in 1 2 / 3 pin combined all as specified and directed. 110 supply and fix switch modular flush type 15 / 16 amp single pole one way 240 volt one module isi marked 111 supply and fix modular sockets 16amp 2 in 1 3 / 5pin combined all as specified and directed. 112 supply and fix ceiling rose surface bakelite 60x25mm three terminal 113 s&f led batten luminaire surface mounted, 4 feet system wattage of 20 watts, system lumen efficiency >90 lumen / watt, 6500kandincluding connectingfrom ceiling rose to fitting completeallas specified and directed. 114 supply and fix in replcementflood light 30 watt 240 volt 50 htz 3000 / 6500k 120 lumen / wattip 65complete all as spd and directed. 115 supply & fix mcb db spn 8 way, double door, ip 43, ik 09, isolated neutral bar and fixed flush to wall and suitable for universal mounting completeall as specified and directed. 116 supply and fix mcb, single pole and neutral, 230 volts, 32 to 40 amp rating, c series fixed in dbs catered here in before. make legrand / hager / siemense 117 supply and fix mcb sp 6 32 amps 240 volts 10 ka 50 hz c curve complete all as specified and directed by engineer in charge 118 supply and fix wall mounted fan 400mm size, 230 volts , 50 hz 1420 rpm with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed. 119 m&l for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 metres deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia asearth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3, mes ssr part i 2009 with 15 mm dia medium grade gi pipe as a protection to earthing lead and 20 mm dia medium grade gi pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, rcc pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. notes ( i ) the concrete pit shall be pcc ( 1:3:6 ) type c 1, 40mm thick precast cover slab of rcc with suitable mild steel handle in lieu of cast iron cover shown in electrical plate no 3 of mes ssr part i ( ii ) pcc pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. ( iii ) item includes the cost of 7.5 metre earth lead wire andgi pipe for protection of earth wire. any varriation in quantity shall be adjusted. 120 supply, laying, jointing & testing of underground lt cables xlpe insulated, pvc sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 volt grade cross sectional area 16 sqmm 2 core laid in trenches / ducts / along poles / through pipe under road etc with new aluminium lugs....

North Central Railway - Uttar Pradesh

33396075 supply of set of bituminous paints.set of bituminous paints.,set of bituminous paints. (1) bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. (2) bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. (3) bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs (three items=1 set. spec. modified as per crws bpl letter no. 28/l/77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. specn: irs/spec.no.p 29/68. => limited...

North Central Railway - Uttar Pradesh

33252995 supply of set of bituminous paints.set of bituminous paints.,set of bituminous paints. (1) bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. (2) bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. (3) bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs (three items=1 set. spec. modified as per crws bpl letter no. 28/l/77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. specn: irs/spec.no.p 29/68. => limited...

Uttar Pradesh Rajkiya Nirman Nigam Limited - Uttar Pradesh

26484439 invitation of rates for m . s . fabrication works 1 press steel door/window frame made with 1.25 mm crc sheet including hinges 3 no. isi marked (100x14g) fixed with screw, jams base tie or 20x40mm, ms flat with ms flat iron hold fast 20x40mm, 150mm long including 1 coat of approved zinc chromate anti corrosive paint including fixing of isi marked ms hinges 14 gauge 100mm. 2 85x50 without rebate 3 80x50 without rebate 4 100x50 with one rebate 5 100x50 without rebate 6 120x50 double rebate 7 extra for supply of isi hinges 100mmx14g including fixing in frame 8 do but welding with chaukhat 9 supply of fabricated ms glazed door windows /ventilator of standard steel roller isi z section of required size with ms flat iron hold fast 20x4 mm 150m long including one coast of approved red oxide primer & fitting arrangement complete (cost of fittings will be paid separately) 10 supply of fabricated ms crc sheet (bokaro essar, tata or equivalent) door shutter upto 18 gauge including locking arrangement, handles etc. as per approved design including one coat of red oxide primer. 11 supply of fabricated angle iron nosing made with 35x35x5 mm with red oxide approved primer 12 supply of fabricated ms grill/railing of made of flat/iron / sq. bar of approved pattern and design in required size including fixing with ms frame with one coat of red oxide primer. 13 supply of fabricated m.s. chahali made with flat iron and angle iron of required size and design. 14 supply of fabricated ms angle iron/chaukhat made with 35x35x5, 40x40x6 mm of required size including ms tie rod of 12 mm bar, isi ms hinges (100x14g) 3 no. fixed with screw arrangement isi marked 100 x14 g fixed with frame with hold fast of flat iron 20x4 mm 150 long including one coat of red oxide. 15 fabrication of tower bolt 150mm isi make. 16 fabrication of i hook 200x5mm 17 supply of rolling shutters of approved make made of 80x125 mm (3”x18g) cold rolled ms lath inter locked through their entire length jointed together at the end by locks and mounted on specially designed pipe shafts with brackets side guides , arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring. 18 supply of 27.5 cm. long wire spring grade 2 for rolling shutters. 19 supply of top cover for rolling shutters made 18 gauge ms sheet. 20 supply of ball bearing for rolling shutters. 21 supply of 8 mm ms round bar rolling shutter grill of required size with rolling shutter as approved design & pwd specification 22 supply of collapsible steel shutters with vertical channel 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rails of t iron 40x40x6 mm with 38 mm dia steel pulleys with bolts, nuts locking arrangement stoppers handles complete including one coast of primer of approved quality. 23 supply of ci/ms decorated ornamental main campus gate made with m.s. hollow pipe, m.s. sheet, m.s. iron, twisted bar caste iron, c.i. designer pieces as per approved design including cost of red oxide primer of approved quality. 24 supply of ms chahali made with 16 gauge conduit pipe upto 8’ long 1 ½ feet wide frame with 25x4 ms flat both end closed with angle iron and flat rebated as per approved design and drawing of one coat red oxide paints complete. 25 supply of fabricated cow catcher made with 65 to 100 mm g.i. pipe b class isi jindal/surya with ms girder channel as per approved design , drawing for all sizes 26 supply of fabricated rectangle/square hollow pipe /ms pipe /railing /gate/post of different sizes including one coat of red –oxide. 27 –do but ornamental in round, corner 28 supply of mechanical hinges 40 mm round bar with ball and socket joint 40x50 mm. 29 –do but 40x100 mm. 30 supply of m.s measuring box 1’x1’x1’x 25mm ms pipe handles. 31 supply of fabricated tubular trusses shade made with m.s. pipe of required dia as per structure design & drawing including foundation bolt, base plate, wind tie as required, including red oxide paint complete. 32 do but make with angle iron 33 labour charges for erection of above trusses shade including supply of all labour and t&p and required scaffolding, welding, fixing at site complete without civil work. 34 supply of fabricated 3’ x 5’ m.s. chhanna made of 35 x 35 x 5 angle iron frame and stand, g.i. screen of suitable size backing with 1’ x 1’ welded mesh and one coat red oxide primer. 35 supply of power loom 14x24 pure g.i. mosquito wire mesh frame 20x4mm m.s. flat rebated as required size and design including welding, supply & all labour material, t & p etc. required for proper completion of work. 36 supply, fabrication and erection of partition jali frame of 35x35x5 angle iron frame with 1x3x8 gauge welded mesh jali 25x5 flat iron beading cross beading 32x5 including priming coat, all material, labour etc. complete. ...

Military Engineer Services - Uttar Pradesh

25793209 repair / replacement of lt distribution panel with connected unserviceable items in wac line , mh, cod, lalkurti etc under ge ( e ) agra 2 excavation in trenches in soft / loose soil n. exc 1.5 mtr wide and not exc. 1.5 meter deep and getting out including forming bottom surface for laying of cable complete all as specified and directed. 3 all as per item no 1 above but depth exceeding 1.5 mtr deep & not exc.3.0mtr complete all as specified and directed. 4 returning filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. 5 removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. 6 supplying and laying sand cushioning for cable protection in trenches / filling in ducts at sub stations complete all as specified and directed. 7 supplying and laying bricks old size sub class ‘b’ laid flat across the cable with length of whole brick for protection of cable complete all as specified and directed. 8 laying only old retrieved bricks old size sub class ‘b’ laid flat across the cable with length of whole brick for protection of cable complete all as specified and directed. 9 m&l for plain cement concrete type d 2 1:4:8 ( using 40mm stone aggregate ) in foundations, filling and mass concrete for pole & stay etc complete all as specified and directed. 10 m&l for plain cement concrete type c 1 1:3:6 ( using 20mm stone aggregate ) in coping of pole etc including necessery form work complete all as specified and directed. 11 taking out from trenches or wall / pole or pipe cable lt 1100 volts grade heavy duty , armoured with steel strip of wire , with stranded aluminium conductor of any size upto 25 sqmm , any core , for rectification of faults or replacement. seggregating serviceable cable and unserviceable lenght by meggering or any other suitable and recommended method. removing unserviceable from site and keeping aside serviceable for reuse at same location or any other location under age e / m all as rquired at site or directed. n ( earth work will be measured and paid separately under respective item ) . 12 all as per srl item 10 here in above but of size of cable 35 sqmm to 95 sqmm complete all as specified and directed. 13 laying only in trenches or fixed to wall / pole or passing through pipe cable lt 1100 volts grade heavy duty, armoured with aluminium conductor of any size upto 25 sqmm any core. ( serviceable cables retrieved against srl item 10.00 above will be used ) . 14 laying only in trenches or fixed to wall / pole or passing through pipe cable lt 1100 volts grade heavy duty, armoured with aluminium conductor of any size 35 sqmm to 95 sqmm any core. ( serviceable cables retrieved against srl item 11 above will be used ) . 15 supply and laying in trenches / pipe / on wall and connecting and testing xlpe insulated screened, pvc bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100v grade isi marked is 7098 ( pt i ) of size 16 sq mm 2 core complete all as specified and directed. make havells / gloaster / polycab / grandlay 16 all as per item no 14 above but 25 sq mm 3.5 core complete all as specified and directed. 17 all as per item no 14 above bu 35 sq mm 3.5 core complete all as specified and directed. 18 all as per item no 14 above bu 50 sq mm 3.5 core complete all as specified and directed. 19 all as per item no 14 above bu 70 sq mm 3.5 core complete all as specified and directed. 20 all as per item no 14 above bu 95 sq mm 3.5 core complete all as specified and directed. 21 all as per item no 14 above bu 120 sq mm 3.5 core complete all as specified and directed. 22 all as per item no 14 above bu 185 sq mm 3.5 core complete all as specified and directed. 23 all as per item no 14 above bu 240 sq mm 3.5 core complete all as specified and directed. 24 supply and fix cable end termination jointing kit suitable for 1100 volts grade lt cable for indoor / outdoor heat shrink type joint complete with jointing material and accessories suitable for 3.5 core xlpe armoured aluminium conductor cable of size 25 to 50 sqmm complete all as specified and directed. make : 3m / m seal / denson / reychem 25 all as per item no 23 above but 70 sq mm to 150 sqmm complete all as specified and directed. 26 all as per item no 23 above but 185 sq mm to 300 sqmm complete all as specified and directed. 27 m&l for cable jointing kit straight through, heat shrinkable type suitable for xlpe / pvc cables of size 25 sqmm to 50 sqmm 3½ core core with working voltage 1100 volts complete all as specified and directed. make: raychem / denson / m seal. 28 m&l for cable jointing kit straight through, heat shrinkable type suitable for xlpe / pvc cables of size 70 sqmm to 150 sqmm 3½ core core with working voltage 1100 volts complete all as specified and directed.make: raychem / denson / m seal. 29 m&l for cable jointing kit straight through, heat shrinkable type suitable for xlpe / pvc cables of size 185 sqmm to 300 sqmm 3½ core core with working voltage 1100 volts complete all as specified and directed.make: raychem / denson / m seal. 30 material and labour for gi tubing light grade 50mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed. ( clamps for fixing pipe, nuts, bolts washers shall be measured separately ) 31 taking down carefully aluminium conductor of any size from lt oh lines after unbinding from insulators for replacement of multijointed / undersize conductors complete all as specified and as directed 32 supplying, fixing, stringing of aluminum conductor steel reinforced ( acsr ) including binding wire for binding to aluminum conductor properly on insulators at least 50mm on existing / new pole over head lines, jumpring, connection and jointing and testing complete all as specified and directed. make:indial alluminium co / bharat conductor / alind nnote : ( i ) cost of jumper is deemed to be included in the rate 33 restringing and restretching aluminium conductor reterived under item srl 30 above including necessary binding with insulators using alunimium binding wire, connections of incoming and out going cables complete all as specified and directed. 34 restringing of existing oh line, of acsr of any size / type on existing oh line restraching properly and fixing on existing insulators on oh cross arms of poles including disconnection service connection street light fitting etc and reconnecting the same after restraching complete all as specified and directed n 35 m&l in replacement for gi wire 4mm dia drawn straight horizontal as continuous earth wire on poles or fabrication of cradles complete all as specified and directed. 36 m&l for aluminium strip of any size cut to length as required at site including drilling holes, bend to shape for repairing of lt panels / gods all as required or directed by engr in charge. 37 m&l for copper strip of any size cut to length as required at site including drilling holes, bend to shape for repairing of lt panel / god switches all as required or directed by engr in charge. 38 m&l for shackle type insulators of 100mm high, 115mm dia porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts complete all as specified, required at site or directed. 39 m&l for pin insulators 75 mm height and 90mm dia size porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts complete all as specified, required at site or directed. 40 m&l for stay assembly using gi stay rod 20mm dia complete with stay plate mild steel of size 300x300x6.00mm thick, stay bow complete all as specified and shown in electrical plate no 1 . ( necessary earth work, stay wire, loop insulator, clamps and pcc shall be measured and paid seperately ) complete all as specified and directed. 41 m&l for galvanised stay wire of size 7 / 4mm all as specified and directed. 42 m&l for loop type insulator large size porcelain vitirious of size 90 x 140 mm clearence of hole 16mm complete all as specified and directed. 43 m&l for steel tubular swaged pole 9 mtr long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 sp 31, including painting with anti corrosive paint internally complete and externally up to planting depth, alternative green & white strips of 30 cm width upto 1.5 mtr above ground level, balance lenght to be painted with two coats of aluminium paint externally all as required at site or directed by engr in charge. 44 supply and fixing in replacement mccb having current ratings 63 amps with rupturing cap 16 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 45 supply and fixing in replacement mccb having current ratings 100 amps with rupturing cap 16 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 46 supply and fixing in replacement mccb having current ratings 160 amps with rupturing cap 25 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 47 supply and fixing in replacement mccb having current ratings 250 amps with rupturing cap 25 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 48 supply and fixing in replacement mccb having current ratings 400 amps with rupturing cap 36 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 49 supply and fixing in replacement mccb having current ratings 630 amps with rupturing cap 50 ka , ac 415 volts three pole with microprocessor release complete with spreader links all as specified and directed including dismentling the existing u / s mccbs with all connections & all as required at site or directed by engr in charge. make legrand / c&s / l&t / siemens 50 removing all connections from lt panel having feeders upto 04 nos ( total of incoming and outgoing ) , any capacity, indoor or outdoor type, fpr repairs / servicing. cleaning properly all parts and removing dust, carbon deposits etc. removing u / s thimbles if any of connections. refixing serviceable items to the panel and making all connections including testing for proper functioning of the panel as per standard engineering pactice. ( u / s items will be provided against respective items separately.. 51 removing all connections from lt panel having feeders above 04 nos upto 08 nos ( total of incoming and outgoing ) , any capacity, indoor or outdoor type, fpr repairs / servicing. cleaning properly all parts and removing dust, carbon deposits etc. removing u / s thimbles if any of connections. refixing serviceable items to the panel and making all connections including testing for proper functioning of the panel as per standard engineering pactice. ( u / s items will be provided against respective items separately. 52 supply and fix in replacement epoxy based post insulators lt 440v for mounting bus bar all as required or directed. 53 supply, installation , commissiong and testing of feeder pillar box, kisok outdoor type, cpri approved tested, lt 440 volts, 50 hz , 3 phase 4 wire supply , floor mounted factory fabricated weather and vermin proof protection class ip 54 made out of 3 mm thick ms sheet crca sheet on angle iron 50x50x6mm frame of size suitable to incorporate following accessories with front and rear opening doors, handle type locking arrangement powder coated internally and externally shall have channel base of appropriate size and mounted on pcc foundation of size as required or approved by manufacturers in pcc 1:3:6 type c 2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the engr in charge including earth work complete comprising of following : nincoming : ( a ) bus bar chamber comprising 4 nos copper strip bus bars pvc insulated made of copper strip of size ( 50 x 6 ) mm. pvc sheathed with colour coding. n ( b ) mccb having current ratings 400 amps with rupturing cap 36 ka , ac 415 volts four pole with thermal release complete with spreader links. make legrand or equivalent of make / c&s / l&t / siemens 01 no noutgoing : n ( a ) mccb having current ratings 250 amps with rupturing cap 36 ka , ac 415 volts three pole with thermal release complete with spreader links. make legrand or equivalent of make / c&s / l&t / siemens 04 no n ( b ) multifunctional digital panel meter with lcd display flush mounting type of size 96x96 mm, accuracy class 1, suitable for cts with secondary current 5a, make l&t or equivalent of make schneider or ae: 01nos nall accessories pre wired with suitable size pvc insulated copper conductor cables for control wiring and pvc insulated copper strips of appropriate size for power circuits as per standard engineering practice and required at site and suitable foundation for panel as per manufacturer recommendation. 54 supply, installation , commissiong and testing of feeder pillar box, kisok outdoor type, cpri approved tested, lt 440 volts, 50 hz , 3 phase 4 wire supply , floor mounted factory fabricated weather and vermin proof protection class ip 54 made out of 3.15 mm thick ms sheet crca sheet on angle iron 50x50x6mm frame of size suitable to incorporate following accessories with front and rear opening doors, handle type locking arrangement powder coated internally and externally shall have channel base of appropriate size and mounted on pcc foundation of size as required or approved by manufacturers in pcc 1:3:6 type c 2 , using 40 mm graded crushed stone aggregate as recommended by manufacturer or directed by the engr in charge including earth work complete comprising of following : nincoming: ( a ) bus bar chamber comprising 4 nos copper strip bus bars pvc insulated made of copper strip of size ( 50 x 5 ) mm. pvc sheathed with colour coding. n ( b ) mccb having current ratings 630 amps with rupturing cap 36 ka , ac 415 volts four pole with thermal release complete with spreader links. make legrand or equivalent of make l&t / c&s / siemens 01 no noutgoing : ( a ) mccb having current ratings 400 amps with rupturing cap 36 ka , ac 415 volts three pole with microprocessor release complete with spreader links. make legrand or equivalent of make / c&s / l&t / siemens 02 no n ( b ) mccb having current ratings 250 amps with rupturing cap 36 ka , ac 415 volts three pole with microprocessor release complete with spreader links. make legrand or equivalent of make / c&s / l&t / siemens 02 no n ( b ) mccb having current ratings 250 amps with rupturing cap 36 ka , ac 415 volts three pole with microprocessor release complete with spreader links. make legrand or equivalent of make / c&s / l&t / siemens 02 no nall accessories pre wired with suitable size pvc insulated copper conductor cables for control wiring and pvc insulated copper strips of appropriate size for power circuits as per standard engineering practice and required at site and suitable foundation for panel as per manufacturer recommendation. 55 disconnecting electrically, dismantling from foundation lt panel any type and removing from site....

Ministry Of Railways - Uttar Pradesh

20140609 tender for phephna aunrihar section : through fitting renewal ( 43.10km ) : taking out existing fitting ( viz.erc, r / pad, m / liner etc. ) fromexisting psc sleeper in running conditions applying anti corrosive paint to erc and metal liner / gfn and then re inserting of new fitting ( viz.erc, r / pad, m / liner etc. ) in pscsleeper following all required operation as mentioned inlwr manual / 1996 and as per direction of engineer incharge with contractors labour tools and equipments allcomplete with due alertness to avoid any accident duringthe working period .the rate also includes cutting of trackfor welding if any operation of realigning gauging of track inrunning / blocked traffic following all required operation asmentioned in lwr mannual / 1996 direction of the engineer in charge.the rate also include squaring of sleeper, spacing of sleeper, with one round stp ( systematic throughpacking ) as per irpwm / 1993 and as per direction of theengineer in charge. note: welding if required will be doneby railway...

North Central Railway - Uttar Pradesh

6434542 set of bituminous paints. [1] bituminous anti corrosive paint black solution brushing type 1st coat. qty. 10 ltrs. [2] bituminous anti corrosive paint black solution brushing type 2nd coat. qty. 06 ltrs. [3] bituminous anti corrosive paint black solution brushing type 3rd coat. qty. 06 ltrs [three itemsequal to1 set. spec. modified as per crws bpl letter no. 28/l/77980256 dated 19.08.2002. the date of supply of the material should be within 60 days from the date of manufacture. irs/spec.no.p 29/68....

West Central Railway - Uttar Pradesh

2616977 part 1)through sleeper renewal by trt and manually at obligatory points on dn road from km 917.20 to 917.34 = 0.14 km. 918.20 to 924.00=5.80 km.total 5.94 km and trough rail renewal manually on dn road from kms 863.70 to 865.00=1.30 km 903.00 to 911.00=8 km 917.10 to 924.10=6.90 km total 16.20km itarsi jabatpur section under divisional engineer jabalpur part 2) painting of rails with anti corrosive paint and grinding of rails gauge faces under assistant divisional engineers narsighpur and assistant divisional engineers jabalpur ....

West Central Railway - Uttar Pradesh

2584827 part 1)through sleeper renewal by trt and manually at obligatory points on dn road from kms 917.20 to 917.34 =0.14 kms, 918.20 to 924.00=5.80 kms, total 5.94 kms and through rail renewal manually on dn road from km 863.70 tro 865.00=1.30 kms, 903.00 to 911.00=8.00kms, 917.10 to 924.00=6.90 kms total 16.20 kms itarsi part 2) painting of rails with anti corrosive paints and grinding of rails gauge faces under assistant divisional engineers narsinghpur and assistant divisional engineers jabalpur sub division on itarsi sihora section....