Indian Army - Uttar Pradesh

39893815 bids are invited for exp item acid sulphuric pure , adhesive padding glue movicol l , adhesive syn resin araldite ay 103 , adhesive syn resin araldite ay 105 , adhesive universal , aluminium bar round 12 point 5mm , aluminium sheet half hard 1 point 22mm , aluminium sheet hard 1 point 2mm , aluminium sheet hard 1 point 63mm , polish metal potassium , polish wax , polythene film point 25mm thick x 1m width , polythene film point 0 point 08mm thick x 1m width , polythene film 0 point 12mm thick x 1m width total quantity : 1287...

Nagar Panchayat - Uttar Pradesh

39852123 tender for construction of taxi stand shed, interlocking footpath, replacement and shifting of aluminium sheet, rebore of hand pump....

Uttar Pradesh Power Transmission Corporation Limited - Uttar Pradesh

39710961 tender for works are to be carried out at 220 kv sub station amroha and 132kv sub station amroha under etd amroha 1 supply & fixing of gear box with spring charging lever for operating mechanism suitable for 36 kv vcb cgl/stelmacetc make having mk/sunkid operating mechanism (as per sample).a 132kv s/s amrohaa. 33kv distt hospitalb. 33kv phondapurc. 33kv ahrohib 220kv s/s amrohaa. 33kv bahadurpurb. 33kv naugawan 2 providing & fixing and hoisting of safety instruction board in front of 220kv amroha yard and 132kv amroha yard size of 5ftx3ft made of 02mm thick aluminium sheet, face fully covered with 3mm dg cube retro reflective sheeting of yellow colour. the letters and symbols shall be computer cut and blue colour, back of aluminium sheet be painted with stove enamel paint. boards are to be supplied along with the back support frame made of ms angle of size 35x35x5 mm and 02 legs of ms angle of size 45x45x5mm height 5 ft on the ground level. grouting on earth as per directions of je in charge. ...

Paschimanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

39665113 tender for half yearly maintenance and repair works of residential colony at victoria park, meerut for the financial year 2023 24. 1 excavation in foundation in ordinary soil ( loam, clay or sand ) including lift upto 1.5 metreand lead upto 30 metreincluding filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation or in to the plinth and removal & disposal of surplus earth as directes by the e / i up to a distance of 30m from the foundation trenches. csi no. 4.01 2 clearing jungle including uprooting of rank vegetations, grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of uppcl area cleared. csi no. 4.08 3 cleaning of grass and removal of rubbish upto a distance of 50 moutside the uppcl area cleaned. csi no. 4.09 4 earth filling under floors and / or sub station area including cost of earth when obtained from with in 8 kmoutside uppcl area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. csi no. 4.10 5 earth filling in bulk in open areas including cost of the earth when obtained from outside corporation’s area including its carriage, loading / unloading, spreading, watering and ramming in 20cm layers and dressing of earth etc. rates including cost of earth, labour, t&p and royality of earth etc. required for proper completion of the work.csi no. 4.11 ( as per old schedule 2020 21 ) 6 providing and injecting chemical emulsion for post constructional anti termite treatment treatment of soil under existing floors using chemical emulsion @ 1 liter / hole at 300mm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand ) after filling with chlorpyriphose / lindane e.c. 20% with 1% concentration.csi no. 4.15 ( as per old schedule 2020 21 ) 7 concrete with 4cm gauge i class brickballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. csi no. 5.01 8 concrete with 4cm gaugestone ballast, coarse sand ( f.m. 1.8 to 2.5 ) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. csi no. 5.02 9 concrete with 4cm gauge i class brickballast, coarse sand ( ( f.m. 1.8 to 2.5 ) and cement in proportion of 10:5:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. csi no. 5.03 10 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work.csi no. 5.06 11 precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and 2 cm gauge graded approved hard stone ballast in the proportion 1:2:4, excluding reinforcement but including fixing the same in position including cost of all other material, labor and t&p.csi no. 5.09 12 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granit, quartzite etc from dalla, jhansi or other quarries in proportion 1:2:4in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p.csi no. 5.10 13 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p.csi no. 5.24 14 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p.csi no. 5.25 15 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in rcc t beam slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p.csi no. 5.29 16 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in foundation and plinth including supply of allmaterials, labour & t&p etc. required for proper completion of work.csi no. 6.01 17 1st class brick work in 1:6 c.m. with cement and coarse sand of 2.25 f.m. mortar in super structure including necessary cutting and moulding of brick as required including honey comb brick work, thickness of wall one brick ( 230mm ) thick in super structure. csi no. 6.01+6.07+6.08 18 same as item no. 17 above but for wall of half brick 4.5” ( 115 mm ) thick but in 1:6 c.m. with cement and coarse sand of 2.25 f.m. mortar. csi no. 6.01+6.07+6.09 19 brick work in foundation & plinth with old dismantledbricks ( supplied by department free of cost ) and coarse sand of f.m. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks, t&p etc complete. csi no. 6.18 20 same as in item 6.18 above butin super structure for 230 mm thick wall. csi no. 6.19 21 supply and filling brick bat in soak pit including all labour, material and t&p etc complete. ( for 01 soak pit ) . csi no. 6.23 22 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand ( f.m.1.8 to 2.5 ) , and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the engineer incharge in the proportions specified by the manufacturer.csi no. 7.02 23 indian sal wood wrought framed and fixed including simple, mouldings straight work as in chaukhats including supply of allmaterials, labour and t&p etc.required for proper completion ofthe work. csi no. 8.03 24 country wood wrought framed and fixed including simple, mouldings straight work as in chaukhats including supply of allmaterials, labour and t&p etc.required for proper completion ofthe work. csi no. 8.04 25 additional cost for fixing glass panes with 4.5 cm. thick c.p.teak wood fully panelledincluding cost of materials, labour andt&petc. required for proper completion of the work. csi no. 8.08 26 supply and fixing stopper with rubber pad of chromium polished iron fitting with screws for doors and windows etc. csi no. 8.17 ( l ) ( as per old schedule 2020 21 ) 27 s / f of 25mm dia decorative curtain rod with decorative and caps, matching curtain rings, including fixing with necessary clamps, pvc gully, steel screws etc. complete.csi no. 8.19 ( as per old schedule 2020 21 ) 28 providing and fixing 19mm thick ply board / block board for wardrobe shutter etc. of reliance or scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluding their supply and including cost of all material labour, t&p etc. required forthe proper completion of the work.csi no. 8.25 ( as per old schedule 2020 21 ) 29 providing and fixing of 25×10mm size tapered shape teak wood beading of approved design and fixing with nails and screw as directed by e / i including cost of all material labour, t&p etc. required forthe proper completion of the work. csi no. 8.26 ( as per old schedule 2020 21 ) 30 providing and placing 6 mm thick a.c. plain sheet in false ceiling in proper level and alignment complete.csi no. 8.29 ( as per old schedule 2020 21 ) 31 p / fof 6.0mm thick water proof commercialquality plywood in partition work to make 5x4mm size groove at specified intervals. ply shall be fixed by means of glue and headless nailsat 100mm c / c complete. cost including all labour, material, t&p required for proper completion of work. csi no. 8.30 ( as per old schedule 2020 21 ) 32 supply and fixing of 4.0 cm thick c.p teak wood door and window jali shutters withpanels of heavy quality galvanized iron wire mesh of size 14 x 24 withnecessary beading including supply and fixing of wooden cleats and stopsand including fixing and adjustment of hinges. but excluding supply of fixtures. csi no. 8.37 33 s / f galvanized mosquitos proof heavy quality iron wire gauge ( 14x24 ) over window frames and including supply of c.p. teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials, labour andt&p etc. required for proper complete. csi no. 8.43 34 fixing of departmental doors & windows shutters including supply& fixing of hinges and other fixtures. ( excluding their supply ) including all materials, labour & t&p etc. required for proper completion of work.csi no. 8.51 35 p / f fully anodized aluminium fixed glazing with hindalco or equivalent extruded standard sections14gauge ( 2.41mm thick ) of various cross sections and joints mitred and jointed as shown in drawingincluding providing & fixing 5.5 mm thick toughened glass with neoprene beading & aluminium glazing clips all around. the minimum thickness of anodizing on all aluminiumsections should be 20 microns with a ( + ) 2 microns tolerance . the rate should include the cost of fixing the aluminum frame on teak wood frame or finished wall ( rb / rcc / masonry ) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c / c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of teak frame but including cost of all other material, labour, tools & plants etc. complete. csi no. 8.52 36 same as above item no. 8.52 but for openable window portion as shown in drawings, including cost of aluminium hinges and all other fittings like concealed towerbolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. csi no. 8.53 37 s / fixing of double action floor springs including cutting in floors / rcc slabs and grouting the same with c.c. & finishing the surface properly as and where required under aluminium doors as per direction of engineer in charge.including cost of all other material, labour, tools & plants etc. complete. csi no. 8.52 38 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. csi no. 8.54 39 supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, t & p etc. required for proper completion of the work. csi no. 8.57 40 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p.csi no. 8.60 41 providing and fixing in place a full height storage cabinet 600 mm deep made with 19 mm thick isi marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by engineer in charge including all labour, t&p, other items like ( but not limited to ) fevicol, nails screws, higes, sliders, door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. csi no. 8.64 ( sor 22 23 ) 42 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.csi no. 9.01 43 as in item 9.01 above but when steel is to be provided by the department. csi no. 9.02 44 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) . csi no. 9.03 45 supply and fixing rolling shutter of approved make made of ( 18×125 ) mm m.s. laths interlocked through their entire length and joint together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring.csi no. 9.05 ( as per old schedule 2020 21 ) 46 supply and fixing galvanised mosquito proof jali ( 16x24 gauge ) withm.s. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame.csi no. 9.18 47 p / f in position collapsible steel shutter with vertical channels 20 x 10 x 2 mm. ( 3 / 4 x 3 / 8x 1 / 12 ) and braced with flat iron diagonals 20 x 5 mm. ( 3 / 4 x 3 / 16 ) size with top and bottom rails of tiron 40 x 40 x 6 mm. ( 1 / 2 x 1 1 / 2 x 1 / 4 ) with 38 mm dia steel pullys with bolts, nuts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved red oxide paints.csi no. 9.29 48 p / f concertina coilfencing with required dia. 600 mm upto 3 m height of wall between existing angle iron ‘y’ shaped placed 2.4 m or 3.0 m apart and with 6 horizontal r.b.t. stud tied with g.i. staples and g.i. clips to retain horizontal including necessary bolts or g.i. barbed wire tied to angle iron all complete ( no. of rounds will be 7 to 8 in one meter length ) as per direction of engineer i / c with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm / meter ( cost of ms angle, c.c. blocks shall be paid separately ) . csi no. 9.37 49 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work.csi no. 10.01 50 supply and fixing 6 mm thick grey corrugated asbestos sheet. including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. csi no. 10.03 51 supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the engineer incharge including necessary overlap, applying a coat of approved mastic paint below the tar felt & including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 10.06 52 providing and laying polythene sheet of approved quality in double layer of wt. 0.120 kg / sqm with 100 mm over lapping along roof slope as per direction of e / i complete.csi no. 10.08 ( as per old schedule 2020 21 ) 53 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand ( 1:3 ) , minimum thickness not to be less then 10 mm including supply of all materiallabour and t&p etc for proper completion of work. csi no. 11.06 54 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand ( 1:4 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. csi no. 11.07 55 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. csi no. 11.09 56 add for extra labour to all items of plaster if done in ceiling.csi no. 11.10 57 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & t&p etc. required for proper completion of the work.csi no. 11.13 58 providing ( 12x15 ) mm section groove in plasterincluding all material, labour andt&p etc. required for proper completion of the work.csi no. 11.16 59 making drip coarse ( 25x12 ) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and t&p etc requiredfor proper completion of work. csi no. 11.19 60 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work. ( cement consumption 0.044 bag / sq.m. ) . csi no. 11.20 61 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. csi no. 12.02 62 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. without base cc. csi no. 12.04 63 first class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its rammingincluding supply of all material labour & t&p etc. required forproper completion of the work. csi no. 12.07 64 same as in item 12.07 above but bricks laid flat.csi no. 12.08 65 supply and laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. completion required for proper completion of the work.csi no. 12.12 66 providing and fixing glass strips of 3.15 mm thickness & 25mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc.required for proper completion of work. csi no. 12.13 67 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work.csi no. 12.14 68 providing and fixing 18mm thick polished baroda green stone of approved shade and pattern in floor or on top of kitchen slab etc. laid with 1:3 cement and coarse sand mortar and jointing with white cement mixed with pigment to match the shade including supply of all material, labour and t&p etc. required for proper completion of work.csi no. 12.14 ( as per old schedule 2020 21 ) 69 providing and laying18mm. thickkotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and t&p etc required for proper completion of the work.csi no. 12.17 70 providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand ( bell, johnson or equi. make ) size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and t&p required for proper completion of the work.csi no. 12.18 71 providing and laying of 16 mm thick granite ( black / brown ) inflooring or skirting , of approved shade, colour, size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and t&p required for proper completion of the work, as per direction of engineer incharge. csi no. 12.20 72 s / f 10mm thick group 25 acid resisting tiles of “somany” or equivalent approved make in flooring or skirting ( confirming to i.s. 4457 1967 ) in ordinary portland cement and coarse sand in ratio 1:3 with the joints filled with acid resistant cement “accocide” of a.c.c. or equivalent make acid resistant cement and liquid supplied with cement, mixed in 1:3 ratio to make a workable paste in g.i. tray. the joints should be kept as 5mm and to be cured for 7 days with dilute hcl ( one part acid and three parts of water ) . rate should be including the cost of all materials, labour and t&p etc. required for proper completion of the work.csi no. 12.22 73 supply of 80 mm thick i shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200x ( 160+120 mm ) with minimum 5 mm thick toping of o.p.cement mixed with 25% marble powder. the compressive strength of concrete pavers blocks shall not be less than 30 mpa & 4.5 kg / no. including cost of all material, labour, t&p etc. required for proper completion of work as directed by engineer in charge but excluding g.s.t. which shall be paid extra as per rules.csi no. 12.23 74 painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint luxol or equivalentbrand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103 1950. csi no. 13.01 75 same as in item 13.01 above but for every coat after first coat.csi no. 13.02 76 same as in item 13.01 above but for every coat on previously paintedold wood or iron work including its sand papering, rubbing andcleaning as required, for proper completion of work. csi no. 13.03 77 one priming coat and one coat oil bound distemper on new work includingsupply of all materials, labour and t&p etc. required for propercompletion of the work. csi no. 13.08 78 same as in item 13.08 but for every coat after the first coat. csi no. 13.09 79 same as in item 13.08 but for every coat on previously old oil bound distemper surface. csi no. 13.10 80 applying p.o.p plaster with minimum 6mm to 10mm thick plaster of paris putty on plastered surface of walls / ceilings for smooth finish including its preparation of surface after applying oil based primer and chalk putty over p.o.p. rates including cost of all labour, material, t&p etc. required for proper completion of work. csi no. 13.16 ( as per old schedule 2020 21 ) 81 same as above item no. 13.16but making p.o. p. cornice 100mm×100mm size approved shape and design at junction of ceiling and wall including cost of necessary centering and shuttering p.o.p., its wastage, t&p etc. required for proper completion of work.csi no. 13.17 ( as per old schedule 2020 21 ) 82 making p.o.p. fan ring / circle on ceiling of room of approved shape and design approved by e / i including cost of all materials, labour t&p complete.csi no. 13.18 ( as per old schedule 2020 21 ) 83 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. csi no. 13.20 84 applying birla putty or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ici or equivalent brand for smoothining and leveling of the surface as per requirement and direction of e / i including cost of all material , labour and t&p required for proper completion of work. csi no. 13.21 85 painting one coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including through washing with water including cost of all materials, labour, t&p required for proper completion of work.csi no. 13.22 86 same as in item no 13.22 above but for every coat of additional apex or equivalent brand weather coat paint. csi no. 13.23 87 same as in item 13.22 but for each coat ofapex or equivalent brand weather coat paint .on previously treated surface.csi no. 13.24 88 spirit polish over new wood work after rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, t&p required for proper completion of thework. csi no. 13.29 89 spirit polish over previously polished wood surfaceafter rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, t&p required for proper completion of thework.csi no. 13.30 90 white washing one coat including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 14.01 91 white washing two coat including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 14.02 92 colour washing one coat, using approved colouring material and colourincluding supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 14.04 93 same as in item 14.04 above but for each coat after the first coat. csi no. 14.05 94 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer in charge within a distance of 60 metres. csi no. 15.01 95 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by theengineer incharge within a distance of 60 metres. csi no. 15.03 96 dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the engineer in charge within a distanceof 60 metres. csi no. 15.05 97 dismantling doors or window leaves including stacking ofmaterials as directed by the engineer i / c within a dist. 60 m. csi no. 15.09 98 dismantaling doors and windowschowkhatsincluding stacking of materials as directed by engg in charge within a distance of 60 meters. csi no. 15.10 99 dismantling existing plaster including disposal of refuse asdirected by the engineer i / c within a distance of 60 m.csi no. 15.11 100 scrapping old white or colour wash or distemper including disposal of refuseas directed by the engineer i / c within a distance of 60 m.csi no. 15.12 101 cleaning of existing w.b.m. surface & laying premix 20mm thick over a tack coat with graded approved grit, heating the paint to the required temperature & mixing either in mixture or hand drums including cartage of mixture or hand drums and, maintenance of side patries and watering them during operation and including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 18.07 102 same as in item no. 18.07 above but in laying premix 4.0 cm thick.csi no. 18.08 103 laying seal coat with 6 mm size graded stone grit and bitumen including heating the bitumen paint to required temperature including cartage and cost of materials, labour, t&p etc. required for propercompletion of work.csi no. 18.09 104 boring with 150 mm dia casing pipe to a probable depth of 60 m from ground level with skilled and unskilled labour including all t&p and boring apparatus and supervision charges etc, required for proper completion of the work for submersible pump set.csi no. 18.41 ( as per old schedule 2020 21 ) 105 extraction of casing pipe 150mm. dia after completion of lowering of pipe assembly including all labour and t & p etc. complete.csi no. 18.42 ( as per old schedule 2020 21 ) 106 providing110mm dia plain pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work.csi no. 19.08 107 edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth with in a lead of 50 m 75 class designation 1 fps bricks. csi no. 19.09 ( as per old schedule 2020 21 ) 108 providing 110mm dia slotted pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work. csi no. 19.10 109 supply and plantation of following tree: ( a ) polyalthia pendula ( ashoka pendula ) / cut sagaun / ficus etc of height 100 150 cm. csi no. 19.11 ( a ) ( as per old schedule 2020 21 ) 110 same in item no. 19.11 ( a ) above but for ( b ) cassia fistula ( amaltash ) / delonix regia ( gulmouhar ) / bauhina purpurea ( kachnaar ) / mimusops elengi ( maulsri ) / shisham / neem etc. of height 100 150 cm. csi no. 19.11 ( b ) ( as per old schedule 2020 21 ) 111 supply & installation ofsubmersible pump of k.s.b / calama. or eqt. make including cost of labour, t&p and material required for completion of work. ( b ) 1.5 hp outlet 40mm dia. or more, head 71 / 36, discharge 2000 / 6000 lph csi no. 19.32 ( b ) 112 same as item no. 19.32 ( b ) but for ( e ) three phase 5 hp outlet 50 mm dia. or more, head 60 / 24, discharge 9000 / 24000 lphcsi no. 19.32 ( e ) 113 same as item no. 19.32 ( b ) but for ( h ) three phase 15 hp outlet 80 mm dia. or more, head 57 / 28, discharge 30000 / 65000 lphcsi no. 19.32 ( h ) 114 supply & installation of electrical control panel of l&t / havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. ( b ) for 1.5 / 2 h.p pump set single phase.csi no. 19.31 ( b ) 115 renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work. ( a ) glass of 4 mm thick. csi no. 20.04 ( b ) 116 cleaning of septic tank including disposal of waste out side the uppcl area as per direction of the engineer in charge including cost of all labour, t&p etc.required for proper completion of the work. csi no. 20.12 117 same as in item no.20.12 above but for inspection chamber.csi no. 20.13 118 cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the boards area including washing and cleaning by clean water completely as per direction of the engineer in charge including cost of all labour, t&p etc.required for proper completion of the work. csi no. 20.14 119 same as above in item no. 20.14 but for drain of width less than 300 mm. csi no. 20.15 120 supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.csi no. 20.17 ( a ) 121 same as item no. 20.17 ( a ) above but for ( b ) tower bolts 10 mm dia x 250 mm long.csi no. 20.17 ( b ) 122 same as item no. 20.17 ( a ) above but for ( d ) iron hinges 100 mm size.12 gauge.thick.csi no. 20.17 ( d ) 123 same as item no. 20.17 ( a ) above but for ( f ) m.s.handles 100 mm size.csi no. 20.17 ( f ) 124 leveling and dressing of land by cuttingfilling and upto 150 mm. depth complete with all labour, t&p etc. required for proper completion of the work.csi no. 20.18 125 cleaning and opening of chocked w.c. / bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete. ( analysis based on nbo 11 25.020. csi no. 20.19 126 opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and t&p etc. ( approx. size of shutter 2x2.5 ) . csi no. 20.20 127 polishing of marble floor by cleaning with carborandum stone after washing with tartre cleaning powder etc. and finally with french mansion polish including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 20.22 128 extraction of defective vt submersible pumps and motor with 60 x 90 column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut out fuse and operation of tube well for 24 hours fo rits smooth working with all cost of materials, labour and t&p etc required for the proper completion of the work.csi no. 20.28 129 supply and mixing bleaching powder in over head tank as required or as directed by engineer in charge.csi no. 20.29 130 dismantling and resoling brick on edge / interlocking tile floor with existing old bricks / tile laid dry joints filled with sand including preparation of base to proper slope and camber, its ramming including supply of labour, t&p etc. ( labour only ) csi no. 22.03 ( as per old schedule 2020 21 ) 131 supply and laying 1.5sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete.csi no. 22.06 ( a ) 132 supply and laying 2.5sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete.csi no. 22.06 ( b ) 133 supply and laying 4.0sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete.csi no. 22.06 ( c ) 134 supply and laying 6.0sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete.csi no. 22.06 ( d ) 135 rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and t&p etc. complete ( burnt wirewill not be taken back. ) . csi no. 22.08 136 providing and fixing 12 mm thick shuttering ply by replacing of panels including detaching the shutters, opening out and separating the frame members and panels and including reassembling the shutter in part and again re fixing the shutter including cost of all material, labour and t&p etc. required for proper completion of the work. csi no. 22.09 ( as per old schedule 2020 21 ) 137 replacing and fixing new galvanized mosquito proof heavy quality iron wire mesh ( 16×24 ) gauge over door / window with old beading and including supply and fixing necessary screws / nails and all material, labour and t&p etc. required for proper completion of the work.csi no. 22.10 ( as per old schedule 2020 21 ) 138 painting and printing house number on residence in circle of size 200 mm dia including preparation of base with enamel paint complete as directed by e / i including cost of all materials, labour and t&p etc. required for proper completion of work. csi no. 22.17 ( as per old schedule 2020 21 ) 139 printing name and designation of occupants in a plate of size ( 200×150 ) mm dia including preparation of the base with best quality synthetic enamel paint as directed by e / i including cost of all materials, labour and t&p etc. required for proper completion of work.csi no. 22.18 ( as per old schedule 2020 21 ) 140 supply and sprinkling of lime in all drains of colony and waterlogged area including cost of all labour, materials, and t&p etc, as required for proper completion of the work.csi no. 22.19 141 cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 m. csi no. 22.20 142 cleaning of roads and their side patteries includingsweeping, removing garbage and vegetation from patteries, if anyand and its disposal to dust bins. csi no. 22.21 143 s / rstep type of regulator for ceiling fan of gecor equivalent make of approved quality including cost of all labour material, t&p etc. required for proper completion of the work.csi no. 22.60 ( b ) ( as per old schedule 2020 21 ) 144 s / r of element of geyser 1500 watts 250 volt including taking out damage element and refitting and testing including cost of all labour material, t&p etc. required for proper completion of the work.csi no. 22.65 ( as per old schedule 2020 21 ) 145 operation of tube well by a suitable experienced operator continuously or in different intervals as per schedule fixed by e / i including opening and closing valves, greasing of motor, changing of fuse wire etc. as required for proper running of tube well. csi no. 22.69 ( as per old schedule 2020 21 ) 146 repair of starter for 10 h.p. to 25 h.p. electric motor including its disconnection and opening out, checking & changing of its, coil, minor parts such as nuts, screws, washers, damaged contacts, etc, and its perfect setting, re fixing and testing for its smooth and normal working etc, including cost of all labour material, t&p etc. required for proper completion of the work. csi no. 22.73 ( as per old schedule 2020 21 ) 147 s / r of 10 sqm pvc flat 3 core cable suitable up to 25 hp submerssible motor of finolex / atlas or equivalent make of approved quality including cost of all labour material, t&p etc. required for proper completion of the workcsi no. 22.91 ( as per old schedule 2020 21 ) 148 s / r 63 amp, 415 volt of isi mark rewireable switch porciline fuse unit ( cut out ) ofssk or equivalent make including removing of old unit and reconnection, including cost of all labour material, t&p etc. required for proper completion of the work. csi no. 22.93 ( b ) ( as per old schedule 2020 21 ) 149 s / r of set of main contact of starter up to 25 hp motor l&t make including cost of all labour material, t&p etc. required for proper completion of the work. csi no. 22.95 ( as per old schedule 2020 21 ) 150 hiring charge of welding machine for 8 hours service in a day or part as per requirement for attending miner type welding work as and where required as per direction of e / i. csi no. 22.101 ( as per old schedule 2020 21 ) 151 providing hard rubber beading at bottom of door covered with aluminium strips for restoration of air conditioning and prolection from rats etc, as per direction of engineer in charge including cost of materials labour and t&p etc, required for proper completion of work.csi no. 22.108 ( as per old schedule 2020 21 ) 152 s / f of 24 gauge aluminium sheet of approved quality including cutting, wastage, fixing the same over wooden door shutters by nails including cost of all materials, labour and t&p etc.csi no. 22.113 ( as per old schedule 2020 21 ) 153 opening of aluminium door shutters and refixing the same after replacement of new rubber beading and screws complete excluding cost of al, pipe and glass but including cost rubber beading and screws. cost including all labour, materials and t&p etc, required for proper completion of work.csi no. 22.116 ( as per old schedule 2020 21 ) 154 maintenance of seasonal flower bed including digging the earth inbed ( minimum depth of bed 30 cm ) as per necessity whenevernecessary during replantation, plantation of seasonal flower, manuring, watering, mixing of manure with earth uprooting the expired plants after its expiry and replacement of the new seasonal plants like its seeds including cost of chaukidar, work assistant and miss. works as per directed by engg in charge ( cost of manure, good earth and sand mixture and its spreading shall be paidseparately ) and including fertilizers, pesticides and medicines etc complete. csi no. 23.03 ( a ) 155 same as item no.23.03 ( a ) but for permanentplants. csi no. 23.03 ( b ) 156 supply and stacking of compost manure at site including carriageupto 3 km ( manure measured in stacks will be reduced by 8% forpayment ) . csi no. 23.04 157 supply and plantation of approved 2 years old plants duly plantedin earthen gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure, sand all other materials, labour and t&p etc reqd. for proper completion of work. csi no. 23.08 158 supply and planting seasonal flower plants such as genda, rose, ostar, flox, guldawadi, gulmehndi, cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and t&p etc complete in allrespects. csi no. 23.10 159 supply and planting permanent ornamental plant like croten, varil pristal, glodulus, lily, fern, bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and t&p etc complete also including preparation of flower bed. csi no. 23.11 160 supply and plantingashoka, pendula, mango, neem, peepal, sheesham etc in pits including cost of all materials, labour and t&p etc complete in all respects. ( cost of digging pitshall be paid separetely as per item no. 23.08 ) . csi no. 23.12 161 supply and planting of garden grass ( australian ) . including cost of plants, manure, pesticides, fertilizer, labour and t&p etc complete also including preparation of bed. csi no. 23.14 162 arranging one mali for maintenance of lawn & plants, including cost of mali, required t&p and other miscellaneous work as per direction of engineer i / c.csi no. 23.15 163 hedge plantation in a row distance between two hedge 15 to 25 cm including digging hole 6” to 12” , manure and treatment with proper chemical etc., including cost of all materials, labour and t&p etc complete in all respects.csi no. 23.16 164 wiring point for light with 1.5 sq. mm. fr pvc insulated multistrand single copper conductor cable in pvc conduit pipe concealed in the wall, 14 swg copper pvc coated earth continuity wire, and approved quality, piano type switch ceiling rose / angle / batten holder as per approved sample on 3mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect. psi no. 121 ( b ) 165 wiring point for fan / fresh air fan ( light duty exhaust fan ) 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable pvc conduit pipe concealed in the wall, 14 swg copperearth continuity wire and approved quality, piano type switch & ceiling rose as per approved sample on 3mm thick phenolic laminated backelite sheet etc. of matching shade with wall colour complete in all respects as per direction of e / i. psi no. 123 ( b ) 166 wiring point for plug with 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable in pvc conduit pipe concealed in the wall 14 swg copper earth continuity wire and approved quality type switch and socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of e / ipsi no. 124 ( b ) 167 supply and burring of safe earthing electrode t 39 cu copper coated, length 2000mm outer pipe 76.3mmx3.2 inner pipe 42.4mm x2.6mm terminal dia 12mm, coating 80 100 micron filled with crystalline property with 50 kgs activated soil ( bfc ) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm squre c.i. frame with hinged cover & massory housing. ( from electrode terminal to switch board, cost of 25x3 copper strip will be extra.psi no. 727 ( c ) 168 supply and fixing of power plug with 15a / 240v v flush type switch and 5 pin 15a / 250v flush type universal socket in suitable m.s. box of 175mmx 100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.csi no. 21.20 ( as per old schedule 2020 21 ) 169 s / r of bakelite angle holder of ssk or equivalent make of approved quality including cost of all labour material, t&p etc. required for proper completion of the work. csi no. 22.51 ( as per old schedule 2020 21 ) 170 s / r of piano type switch 6 amp 250 volt of havells or equivalent make of approved quality including cost of all labour material, t&p etc. required for proper completion of the work. ( a ) without framecsi no. 22.52 ( a ) ( as per old schedule 2020 21 ) 171 s / r socket 2 / 3 pin 6 amp 250 volt of havells or equivalent make of approved quality by e / i. including cost of all labour material, t&p etc. required for proper completion of the work. ( a ) without frame csi no. 22.53 ( a ) ( as per old schedule 2020 21 ) 172 add extra for using 12mm long c.p. brass heavy quality 15 mm dia extension nipple for bib / stop cock etc complete. csi no. 24.27 ( a ) ( as per old schedule 2020 21 ) 173 providing and fixing 80 / 100 mm dia c.i. d jonit with ring rubber packing nut, bolt and washer etc. complete as per direction of e / i. csi no. 24.50 ( as per old schedule 2020 21 ) 174 providing and fixing jet with pipe heavy quality including supply of all material, labour and t&p etc. required for proper completion of the work.csi no. 24.54 ( as per old schedule 2020 21 ) 175 providing and fixing glass shelf 7 / 32” ( 5.50mm ) thick of 600 mm × 130 mm size with c.p. brass guard rail of standard size and brackets fixed to wooden cleats with c.p. brass screws including supply of all materials, labourand t&p etc. required for proper completion of work .csi no. 25.22 ( as per old schedule 2020 21 ) 176 providing and fixing 15 mm dia b class jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete.csi no. 26.01 ( a ) 177 same as item no. 26.01 ( a ) but for 20 mm dia.csi no. 26.01 ( b ) 178 same as item no. 26.01 ( a ) but for 25 mm dia.csi no. 26.01 ( c ) 179 same as item no. 26.01 ( a ) but for 32 mm dia.csi no. 26.01 ( d ) 180 same as item no. 26.01 ( a ) but for 40 mm dia.csi no. 26.01 ( e ) 181 same as item no. 26.01 ( a ) but for 100 mm dia.csi no. 26.01 ( i ) 182 providing & fixing half turn 15mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.05 ( a ) 183 providing & fixing half turn 20mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.csi no. 26.05 ( b ) 184 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.06 ( a ) 185 providing and fixing pvc connection pipe, 450x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.csi no. 26.09 ( b ) 186 p / f gi unions nominal bore 15 mm, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.10 ( a ) 187 p / f gi unions 20 mm nominal bore, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.csi no. 26.10 ( b ) 188 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completion of work. csi no. 26.12 189 providing a.c. box with mcb, anchor / havells or equivalent make as per direction of e / i.csi no. 26.13 ( as per old schedule 2020 21 ) 190 p / fbrass bib cock, 15 mm dia ( 400 gsm ) isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.13 ( a ) 191 same as item no. 26.13 ( a ) but for supply and fixing of 15 mm dia ci / pvc bib cock including replacing of old bibcock complete. csi no. 26.13 ( c ) 192 providing & installation of 5kva voltage stablizer of ( 110v 280v ) rating with copper wiring of blue bird or its equivalent price brand.the rate are inclusive of cartage, manpower, t&p etc required to complete the work in all respect.csi no. 26.16 ( as per old schedule 2020 21 ) 193 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( a ) 194 providing and fixing cp brass shower heavy quality ( > 225 gms ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( e ) 195 providing and fixing cp brass wash basin mixer heavy quality ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( f ) 196 providing and fixingcp brass wall mixerheavy quality ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( g ) 197 providing and fixingc.p.brass telephonic shower heavy quality ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( h ) 198 providing and fixingcp brass angle valve heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( i ) 199 providing and fixingcp brass piller cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( j ) 200 providing and fixingconcealed stop cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no. 26.16 ( k ) 201 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work.csi no. 26.17 202 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. csi no. 26.19 203 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. csi no. 26.20 204 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. csi no. 26.21 205 s / f high tensile steel colour coated anti rust, high temp resistant sheet with tensile strength 550 pma hot dip metallic ( zinc aluminium ) alloy ( zn 55% ) al, ( 45% ) coating 70 gsm with total thickness not less than 0.50 mm ( tct ) durashine or equivalent make with necessary over lops incl s / f galvamized j / v hook with bolts, nuts, washer and bitumen washers etc. incl, cost of material, labour t&p etcincluding cost of material, labour t&p etc, required for proper completion of work as per direction of e / i confirming a.s. 1397:199. csi no. 26.60 ( as per old schedule 2020 21 ) 206 providing and fixing first quality white glazed orissa pattern w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete.csi no. 27.01 207 same as in item no. 27.01 but of european type. csi no. 27.02 208 providing and fixing plastic seat covercomplete with plastic lid for european type wc isi markedincluding supply of all materials, labour and t&p etc.complete. csi no. 27.04 209 providing and fixing flat back 430x370x340 mm . size lipped front urinal basin of white glazed earthern ware first quality ( hindutan, neycer make ) i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. csi no. 27.06 210 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. csi no. 27.08 211 same as in item 27.08 above but when wash hand basin of size 450x300 mm size is used. .csi no. 27.10 212 providing and fixing 10 litres low level pvc flushing cistern, complete with all fittings including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 27.12 213 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. csi no. 27.13 214 providing and fixing in position 32 mm. dia p.v.c.waste pipe for wash basin. including supply of all materials, labour and t&p etc.required for proper completion of the work. csi no. 27.14 215 providing and fixing 600 mm x 450 mm beveled edge mirror of atul, kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work.csi no. 27.15 216 providing and fixing 750 mm x 20 mm size c.p. brass towel rail of approved qualityincluding bracketsincluding supply of all materials, labour and t&p etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work.csi no. 27.16 217 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work.csi no. 27.19 218 supply and fixing 100 mm.pvc trap india make of heavy approved quality complete with ci grating, includingsupply of all materials, labour and t&p etc. required for proper completion of the work. csi no. 27.21 ( b ) 219 providing and fixing 100 mm dia white glazed p or s trap including cement concrete and all materials, labour cartage t&p etc.required for proper completion of the work. ( for w.c. ) .csi no. 27.23 220 providing and fixing stainless steel sink 610x450x200 mm heavy quality ( isi marked ) includingall materials, labour cartage t&p etc.required for proper completion of the work.csi no. 27.26 221 providing and laying75 mm dia.swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work.csi no. 27.29 ( a ) 222 same as in item 27.29 ( a ) above but for 90 mm dia.csi no. 27.29 ( b ) 223 same as in item 27.29 ( a ) above but for 110 mm dia.csi no. 27.29 ( c ) 224 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work.csi no. 28.19 225 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : ( a ) first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. ( b ) second layer of slurry of cement @ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. csi no. 28.26 226 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: ( a ) applying a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. ( b ) laying brick bats with mortar using broken bricks / brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineerin charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. ( c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge. ( d ) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement :4 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. ( e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“all above operations to be done in order and as directed and specified by the engineer in charge :with average thickness of 120 mm and minimum thickness at khurra as 65 mm. csi no. 28.28 227 providing and fixing false ceiling at all heights with integral densifiedr armstrong false ceiling tiles of size 595x595 x12 mm of approved texture, design and patterns having nrc ( noise reduction coefficient ) of 0.50 ( minimum ) as per is 8225:1987, light reflectance of 85% ( minimum ) . non combustible as per bs:476 ( part 4 ) , fire performance as perbs:476 ( part 6 &7 ) , humidity resistance of 100%, thermal conductivity < 0.043 w / m k as per astm 518:1991, in true horizontal level suspended on interlocking metal powder coated t grid of hot dipped galvanised iron section of 0.40 mm thick on silhouette profile, rotary stiched double webbed white with 6 sub head : 26 new technologies and materials 1632 mm reveal profilewhite / black ) , comprising of main t runners of size 15x42 mm of length 3000 mm, cross t of size 15x42 mm of length 1200 mm and secondary intermediate cross t of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x2 mm. galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. 26.23.1 with 12 mm thick armstrong miniralfobre sound absorbing sheetcsi no. 28.30 228 providing and fixingacp in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with acpof 4.0 mm thickness. csi no. 28.31 229 supply and fixing of 5 blade exhaust fan ventile air dx 225 mm of havellsor equivalent make including all material, t&p etc required for proper completion of work as approved by engineer in charge.csi no. 28.38 230 rewinding of 15 h.p sub merssiblemotor with 2.10sqmm. pvc insulated copper wire of finolex or equivalent make as per approved sample including cost of winding wire and pvc insulated sheet etc, including dismantling of sub mersible motor from pump and column pipe and taking out burnt copper wire from its slots and cleaning of slots with sand paper and rewinding including cost of its testing up to 24 hrs and guarantee for 6 months for its smooth and normal working including all cost of material, labour and t&p etc, required for proper completion of work. ( burnt copper wire cost is adjusted in given rate and shall be the properly of contractor.nsi 231 p / f openable steel glazed windows and ventilators of standard rolled z section conforming to is 7452 1974 and welded with ( 100×20×5 ) mm holdfast embedded in c.c. block ( 23×11.5×7.5 ) cm size of 1:2:4 proportion of cement, coarse sand, & 20mm graded stone ballast as per drawing etc. complete but excluding s / f of glass panes of 4mm thick with nuts glazing clips with special putty of approved make etc. the fabrication should conform to is 1038 1975. including cost of all materials, labour & t&p etc. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 232 same as item no. 230 abovebut for fixed portion. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 233 providing and fixing ist qaulity one piece european type white glazed floor mounted seat isi maked size 695x385x700mm as per approved sample including 10 lit capacity white glazed seat mounted air pressure with flushing cistern plastic seat cover with plastic lid c.p brass hings and rubber buffers with 15mm dia pvc connection 600mm long including supply all material labour t&p etc required for proper completion of the work. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 234 supply and fixing ist quality cera make white glazed wash hand basin with pedestal size ( 650x515x240 ) mm including its fixing with all labour & t&p etc. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 235 supply and fixing ist quality jaguar make 15mm dia c.p brass central hole basin sensor faucet ( model no. 51011 ) battery oprated includingits fixing with all labour & t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 236 s / f best quality bamboo stick incl. with iron wire and fixing through fastener incl. all labour t&p etc. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 237 finishing of walls with three coats water proof exterior emulsion paint “ace” “out look” or equivalent make on new work including one priming coat ( 1 liter paint diluted including 0.75 liter of water ) to give an even shade complete including cost of all materials, labour and t&p etc, as per direction of e / i. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 238 two coat of ace on previously old treated surface on exterior walls. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 239 change thermo state and element in havells 11 fin electric oil filled radiator room heater 2900 w with all labour & t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 240 s / r of brass spendil with washer of approved quality and make for bib / stop / pillar cock. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 241 s / r of syphone system of pvc cistern including all material, labour and t&p etc. complete. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 242 s / r of pvc tank cover of 500 200 liter tank including locking arrangement etc. complete. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 243 s / f of pvc handle of pvc cistern of approved quality etc. including all material, labour and t&p etc. complete. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 244 supply and fixing 1200mm size sweepceiling fan ( g.e.c. / polar / crompton / usha or equivalent approved make ) with double ball bearing, step type electronic regulator, necessary wire and 900 mm long hanging rod with double canopy etc. including testing and commissioning as per direction of engineer in charge. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 245 s / f soap dispenser make ist quality transparent vessel and c.p. brass nozel use for filling hand wash liquid including fixing. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 246 p / f 3mm thick fiber sheet including its cutting and fixing. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 247 supply and fixing ist qualty door loock rectangular and round shape including its fixing. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 248 supply and fixing stainless steel plate robe hook, 8 long including its fixing.nsi 249 hiring charges of hydra machine with fuel & driver for lifting, removing & disposal at proper place of fallen huge trees in campus at hydel colony victoria park, meerut including all labour & t&p etc required for completion of work as instructedby e / i. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 250 supply & fixing 1.5 h.p. submersible starter contact relay including its fixing. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 251 supply & fixing 15mm dia p.v.c. flexible pipe for uses in garden & plants water supply. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 252 supply & fixing 20mm dia p.v.c. flexible pipe for uses in garden & plants water supply. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 253 providing and lowering of 50mm dia p.v.c. flexible pipe make with coupling socket etc including cutting the pipe of required length and fixing including cost of all materials labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 254 service of 15 kva generator including changing all filters, oil, petty parts with all labour & t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 255 supply and fixing 2mm thick transparent polythene heavy quality including its cutting of required size and fixing with 25mm long metro screw with all labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 256 supply and fixing m.s 16mm dia 150mlong anchor bolt fixing with hammer drill machine with all labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 257 supply and harrison cx 3000 0557 stainless steel 11 leaves pad lock with 3 key. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 258 supply of plastic body 12 lit capacity pedal dustbin with removal garbage bag. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 259 supply and fixing jaguar make 5 lit capacity wall mount cistern including its fixing with all labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 260 supply and fixing 200mm dia 26 watt circular led light with adaptor in lift including its fixing charge. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 261 supply and fixing 15mm dia c.p brass alton grace make 2 in 01 wall mixer with 40m long c.p brass extension pices including its fixing with all labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 262 repair of grass cutting machine including motor binding supply new blade, supply new condenser with all labour and t&p. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 263 supply and installation luminous rc 25000 200 ah tubular battery including its installation charge. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 264 supply of 2000w bajaj make blower with two heat setting and auto thermal cut out. ( rate already sanction by agr. no. 07 / 2020 21 ) nsi 265 supply and fixing of u.p.v.c 80mm dia 11 kg / cm2 coloumn pipes aashirvad make with coloumn coupling socket as required for proper completion of work including all labour material &t&p. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 266 roof treatment work with 2mm thick dr. fixit urpwith cement salary and fiber glass mesh 1mm thick ist coat urp and cement mixer ratio ( 1:1.5 ) on properly cleaned roofsurface and laying fiber glass cloths after once again 1mm thick 2nd coat urp and cement mixer in ratio ( 1:1.5 ) including all labour & t&p. ( already sanction by s.e ( c ) vide om. no. 779 / ecdc / mt / wt 1 dt. 01.07.2022 ) nsi 267 making & fixing flex board size ( 5x4 ) with 25mmx25mm light weight hollow pipe frame including writting as per required metter with all labour & t&p. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 268 supply and fixing 10mm dia supporting cable for support 15 h.p submersible pump in loweringincluding all labour & t&p. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 269 supply and fixing 10mm dia supporting cable for support 15 h.p submersible pump in loweringincluding all labour & t&p. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 270 supply and fixing 24 watt led tube light phillips, havells and equvalent make including its fixing & t&p. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 271 supply and fixing of under water flood light, recess mounting suitable for & with 50 watt lamp confirming to ip 68 protection including its installation. ( rate already sanction by s.e ( c ) vide o.m no. 472 / ecdc / mt / wt 1 dt. 20.04.2022 ) nsi 272 supply and fixing 9 watt led bulb bajaj, havells, phillips & equivalent make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 273 supply and fixing 15 amp 250 volt, socket of havells, anchor or equivalent make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 274 supply and fixing 15 amp 250 volt, socket of havells, anchor or equivalent make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 275 supply and fixing havells make 63 amp four pole change over including its fixing with all labour & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 276 supply and fixing door bell of anchor or equivalent make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 277 supply and fixing 12 watt led bulb bajaj, havells, phillips make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 278 supply and fixing acp sheet name plate with night refleted material including writing required name & degigration including its fixing. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 279 supply and fixing call bell of anchor or equivalent make of approved quality by e / i including cost of all labour material & t&p etc. ( rate already sanction by agr. no. 18 / 2022 23 ) nsi 280 engaging of carpenter for petty works of site etc. as per direction e / i.based on. csi no. 1.10 281 engaging of plumber for petty works of site etc. as per direction e / i.based on. csi no. 1.15 282 engaging of belder / majdoor for petty works of site etc. as per direction e / i.based on. csi no. 1.20 283 engaging of electrician with kit for petty repair of electrical works, etc. as per direction of e / ibased on. csi no. 1.36 284 circuit wiring / submain wiring:circuit wiring starting from distribution boxto point control box / switch box inpvc ( heavy ) 25mm dia conduits, using accessories such as bends, tees, saddles, draw boxes, mounting boxes, inner plates, cover plates, ceiling rose etc. ( including chase cutting & filling of chase where ever required ) with pvc insulated 1100v grade fr multi stranded copper conductor wire ( color code to be used ) . identification ferrules at both end to be provided.circuit wiring using 2 runs of 2.5 sq.mm+ 1 run of 1.5sqmm pvc insulated copper wire drawn in25mm dia 2 mm thick pvc conduits as lighting circuits being reckoned from distribution board to first light / fan control switch boards psi no. 1307 ( c ) up pwd sor 2009 285 circuit wiring using 2 runs of 4.0 sq.mm+ 1 run of 2.5 sqmm pvc insulated copper wire drawn in25mm dia 2 mm thick pvc conduitspower circuits being reckoned from distribution board to first power control switch boards. ( for power points 15 amp ) psi no. 221 ( c ) 286 circuit wiring using 2 runs of 6.0 sq.mm+ 1 run of 4.0 sqmm pvc insulated copper wire drawn in25mm dia 2 mm thick pvc conduits aspower circuits being reckoned from distribution board to first power control switch boards. ( for a.c. ) psi no. 222 ( c ) 287 supply and wiring of submain with two number 10 sqmm pvc insulated 1100 v grade single core aluminium conductor cable in 25mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with reinforcement before concerting with one number 8 swg gi earth continuity wire including matching colour wash etc complete in all respect.psi no. 123 288 supply and fixing 6a to 32a sp mcbc curve 10 ka psi no. 1002 289 d ) 63 amp. isolator psi no. 1005 ( b ) 290 surface flush mounted 8 ways s.p.n. distribution board.psi no. 1024...

Public Works Department - Uttar Pradesh

39662484 tender for repair work of fire fighting equipment installed in the district court jaunpur premises. 1 sitc of smoke detector as per fire specification including making connection with wire system 2 sitc of manual call point break glass type housed in m.s. sheet including make connection 3 sitc of electronic lmt hooterhoused in m.ssuitable forwall mounting / ceiling , including connection 4 supply and wiring ofsub main with 2 no. 1.5 mm2 pvc insulation 1100 volt grade single core copper conductor cable in 20mm dia heavy risid steel conduit on surface. 5 sitc of single headed s.s hydrant valve comprising of 80mm dia flanged bend 63 mm dia s.s oblique pattern landing valve complete with blank cap etc. 6 sitc of rrl hose 63mm dia 15 mtr long complete with s.s couplingconfirming to is 636 7 repairingofhosebox m.ssheetwithglassfronteddoorincluding locking arrangementtoaccommodate2nos.rrlhose&1nos.ssbranchpipewithnozzel. 8 repairingof fire alarm local control panel for above complete 9 repairingof fire alarm main panel for above complete in all respect. 10 first aid hose reel pipe 30 meter long rubber pipe shut of nozzle, 20mm dia gate valve complete 11 repairing of electrical operated main fire pump consisting of1. horizontaltype, multistage, centrifugal, splitcasingpumpofcastironbody&bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520 for 2280 lpm at 70 mtr head.2. suitablehptefctypesquirrelcageinductionmotorof minimum60hp.suitablefor operationon415volts, 3phase50hz, acsupplywithip55protectionforenclosure, horizontal foot mounted type with class f insulation, conforming to is 325.3. completeinstallationwithconcretefoundation ( alledgesshouldbeprotectedwith 50mmx50mmx5mm angle iron ) , common bed plate of iron channel, coupling , coupling guard, vibration pads etc. complete work as per requirement. 12 repairing of diesel engine driven pump consisting of1. horizontaltype, multistage, centrifugal, splitcasingpumpofcastironbody&bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520 for 2280 lpm at 70 mtr head.2.suitable hp, 1500rpm, minimum 60 hp, water cooled, auto start mechanism diesel engine with flexible coupling, exhaust pipe insulatedwith 50 mm glass wool with 1.0 mm thick aluminium sheet cladding, with silencer etc.confirming pollution norms.3. completeinstallationwithconcretefoundation ( alledgesshouldbeprotectedwith 50mmx50mmx5mmangle iron ) and commonbed plate of ironchannel etc. for mounting the diesel engine and pump. complete in all respects. 13 repairing of electrical driven jockey pumpconsisting of1. horizontaltype, multistage, centrifugal, splitcasingpumpofcastironbody&bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520 for 180 lpm at 70 mtr head.2. suitablehptefctypesquirrelcageinductionmotorofminimum10hp.suitablefor operationon415volts, 3phase50hz, acsupplywithip55protectionforenclosure, horizontal foot mounted type with class f insulation, conforming to is 325.3. completeinstallationwithconcretefoundation ( alledgesshouldbeprotectedwith 50mmx50mmx5mm angle iron ) , common bed plate of iron channel, coupling , coupling guard, vibration pads etc. complete work as per requirement. 14 repairing of factory fabricated wired metalclad dust & vermin proof floor mounting main electric control panel for main electrical fire pump, diesel engine pump 1no. jockey pump with starter switch volt meter amp. meter & battery charger with battery. hrc type 315 amp. / 415 volt. main switch engine control relay 75hp star delta starter with timer, single phase protector led indicator lamn etc 15 gst extra @18%...

Uttar Pradesh Power Corporation Limited - Uttar Pradesh

39640594 tender for misc maintenance civil work at shakti bhawan extn lko 1 concrete with 4cm gaugestone ballast, coarse sand ( f.m. 1.8 to 2.5 ) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. 2 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. 3 s / f 40 mm thick precast rcc jali ( approx 0.5 sq.m. size ) ofapproved design with 1:3 cement, coarse sand mortar and 1.6 mm dia m.s.reinforcement with cost of all materials labour and t&pcomplete including cutting required grooves in walls and grouting. 4 concreting of 40 mm thick rcc trench covers in mild steel framework with rcc 1:1.5:3 in cement, chopan coarse sand ( f.m. 1.8 to 2.5 ) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. 5 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. 6 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p . 7 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in foundation and plinth including supply of allmaterials, labour & t&p etc. required for proper completion of work. 8 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in s. s including supply of allmaterials, labour & t&p etc. required for proper completion of work. 9 first class brick work in 1:4 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in super structure in steps, parapet andfacia including nacessary cutting moulding of bricks andincluding supply of all materials labour & t & p required forproper completion of the work including placing & fixing ofreinforcement in position with 24 b.w.g. binding wire withcentering shuttering complete but excluding cost of reinforcementand its bending which shall be measured separately. 10 s / f galvanized mosquitos proof heavy quality iron wire gauge ( 14x24 ) over window frames and including supply of c.p. teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials, labour andt&p etc. required for proper complete. 11 fixing of departmental doors & windows shutters including supply& fixing of hinges and other fixtures. ( excluding their supply ) including all materials, labour & t&p etc. required for proper completion of work. 12 p / f fully anodized aluminium fixed glazing with hindalco or equivalent extruded standard sections14gauge ( 2.41mm thick ) of various cross sections and joints mitred and jointed as shown in drawingincluding providing & fixing 5.5 mm thick toughened glass with neoprene beading & aluminium glazing clips all around. the minimum thickness of anodizing on all aluminiumsections should be 20 microns with a ( + ) 2 microns tolerance . the rate should include the cost of fixing the aluminum frame on teak wood frame or finished wall ( rb / rcc / masonry ) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c / c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of teak frame but including cost of all other material, labour, tools & plants etc. complete. 13 same as above item no. 12 but for openable window portion as shown in drawings, including cost of aluminium hinges and all other fittings like concealed towerbolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. 14 same as in item no. 12but for openable gate / door portion as shown in drawings including cost of hinges and aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. 15 s / fixing of double action floor springs including cutting in floors / rcc slabs and grouting the same with c.c. & finishing the surface properly as and where required under aluminium doors as per direction of engineer in charge.including cost of all other material, labour, tools & plants etc. complete. 16 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. 17 supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, t & p etc. required for proper completion of the work. 18 supply and fixing anodized aluminium door fittings like 2 no 150 mm handles, 2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & t&p etc. required for proper completion of work. 19 supply and fixing anodized aluminium window fittings like 2 no 100 mm handles, 2 no 150 mm tower bolt, 1 no stopper including all materials, labour & t&p etc. required for proper completion of work. 20 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p 21 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. 22 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) 23 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. 24 supply and painting of 85 / 25 grade bitumen paint over roof @ 1.7 kg / sq.m.and spreading 6 mm.size grit over it @ 1 cft / 100 sq.ft. including sweeping, cleaning the roof with brush, heating the paint to required temterature and supply of all materials, labour and t&p etc. required for proper completion of the work. 25 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand ( 1:3 ) , minimum thickness not to be less then 10 mm including supply of all materiallabour and t&p etc for proper completion of work. 26 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. 27 s / mixing approved water proofing compound ( cico, dr fixit etc ) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. 28 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specifiedand including 7.5 cm thick base concrete consisting of cement, coarse sand and 4cm gauge i class brick ballast in the proportion of 1:6:12 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. 29 same as in item no 28 but for without base cc 30 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, of size 300x300 mm, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. required for proper completion of the work. 31 supply and laying 6 mm thickglazed tiles of size 300x450 mm in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. completion required for proper completion of the work. 32 providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand ( bell, johnson or equi. make ) size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and t&p required for proper completion of the work. 33 providing and laying of 8 mm thick vitrified floor tiles of approved brand ( bell, johnson or equi. make ) in size of 600x600 mm of approved shade, colour and pattern as approved by engineer incharge with adhesive of approved quality on existing smooth floorincluding cost of all material, labour and t&p required for proper completion of the work. 34 providing and laying of 16 mm thick granite ( black / brown ) inflooring or skirting , of approved shade, colour, size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and t&p required for proper completion of the work, as per direction of engineer incharge. 35 providing and laying of 16 mm thick marble stone in flooring or skirting, of approved shade, colour, size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and t&p required for proper completion of the work, as per direction of engineer incharge. 36 painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint luxol or equivalentbrand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103 1950. 37 as in item 36 above but for every coat after first coat. 38 as in item 36 above but for every coat on previously paintedold wood or iron work including its sand papering, rubbing andcleaning as required, for proper completion of work. 39 one priming coat and one coat oil bound distemper on new work includingsupply of all materials, labour and t&p etc. required for propercompletion of the work. 40 as in item 39 but for every coat after the first coat. 41 as in item 39 but for every coat on previously old oil bound distemper surface. 42 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. 43 applying birla putty or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ici or equivalent brand for smoothining and leveling of the surface as per requirement and direction of e / i including cost of all material , labour and t&p required for proper completion of work. 44 painting one coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including through washing with water including cost of all materials, labour, t&p required for proper completion of work. 45 same as in item no 13.22 above but for every coat of additional apex or equivalent brand weather coat paint . 46 same as in item 13.22 but for each coat ofapex or equivalent brand weather coat paint .on previously treated surface. 47 painting one coat with acrylic emulsion paint of berger / asian / ici or equivalent paint ( paint and water in the ratio 1:1 by volume ) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and t&p etc required for proper completion of the work, ( preparation of base with birla putty etc. and a coating of primer shall be paid extra ) . 48 same as above in item no 47 but for every coat after first coat of acrylic emulsion paint of berger / asian / ici or equivalent paint. 49 same as above in item no. 47 but one coat of acrylic emulsion paint of berger / asian / ici or equivalent paint on previously painted surface. 50 spirit polish over new wood work after rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, t&p required for proper completion of thework. 51 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer in charge within a distance of 60 metres. 52 dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the engineer in charge within a distanceof 60 metres. 53 dismantling existing plaster including disposal of refuse asdirected by the engineer i / c within a distance of 60 m. 54 scrapping old white or colour wash or distemper including disposal of refuseas directed by the engineer i / c within a distance of 60 m. 55 repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm. ( 3 / 8 ) depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and t&p etc. required for proper completion of the work . 56 repair to 2.5 cm ( 1 ) cement concrete floor in patches including up to 10 cm. ( 4 ) depth renewing 8 cm. ( 3 ) base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm. ( 1.5 ) gauge brick ballast as in c.c.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and t&p etc. required for proper completion of the work. 57 renewing panes of 4.00 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work. ( a ) glass of 5 mm thick. 58 disposal of rubbish / debris out side the uppcl area as per direction of er / in charge including cartage, labour and materials, t&p etc. required for proper completion of the work. ( no. deduction for voids shall be made ) . 59 supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. 60 l drops 16 mm dia x 300 long. 61 tower bolts 10 mm dia x 250 mm long. 62 tower bolts 10 mm dia x 100 mm long. 63 iron hinges 100 mm size.12 gauge.thick 64 iron door spring. 65 m.s.handles 100 mm size 66 m.s. chain kunda. 67 l drop 16 mm dia x 200 mm long. 68 cleaning and opening of chocked w.c. / bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete. ( analysis based on nbo 11 25.020. 69 opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and t&p etc. ( approx. size of shutter 2x2.5 ) 70 polishing of marble floor by cleaning with carborandum stone after washing with tartre cleaning powder etc. and finally with french mansion polish including supply of all materials, labour and t&p etc. required for proper completion of the work. 71 removal of old and damaged sunfilm from the glass panes of doorand window shutters, including removal of glue completely andcarefully by scraping or by any means including cost of allmaterials, labour t&p etc. required for proper completion of thework. 72 providing and fixing sun film of gareware or equivalent make onglass panes of door and window shutters including cost of allmaterials, labour and t&p etc. required for proper completion ofthe work. 73 supply and plantation of approved 2 years old plants duly plantedin earthen gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure, sand all other materials, labour and t&p etc reqd. for proper completion of work. 74 as in item no 23.08 above but in mosaic gamla. 75 supply and planting seasonal flower plants such as genda, rose, ostar, flox, guldawadi, gulmehndi, cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and t&p etc complete in allrespects. 76 providing and fixing 15 mm dia b class jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 77 same as above but for 20 mm dia. 78 same as above but for 25 mm dia. 79 same as above but for 80 mm dia. 80 providing and fixing full way 15mm dia g.m. gate valvewith wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 81 gm full way gate valve 20 mm dia. 82 gm full way gate valve 25 mm dia. 83 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 84 cp brassstop cock 15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) 85 cp brass angle valve heavy quality ( l&k or equi. ) 86 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. 87 providing and fixing first quality white glazed orissa pattern w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete. 88 providing and fixing plastic seat covercomplete with plastic lid for european type wc isi markedincluding supply of all materials, labour and t&p etc.complete. 89 providing and fixing 600 mm x 450 mm beveled edge mirror of atul, kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work. 90 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work. 91 supply and fixing pvc nahani trap india make of heavy approved quality complete with ci grating, includingsupply of all materials, labour and t&p etc. required for proper completion of the work. 92 providing and fixing 100 mm dia pvc p or s trap including cement concrete and all materials, labour cartage t&p etc.required for proper completion of the work. ( for w.c. ) 93 providing and fixing stainless steel sink 610x450x200 mm heavy quality ( isi marked ) includingall materials, labour cartage t&p etc.required for proper completion of the work. 94 providing and laying 110mm swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. 95 providing and fixing 110 mm swr, pvc ( finolex or equivalent ) bends including cost of all materials, labour and t&p etcrequired for proper completion of the work. 96 providing and fixing 110 mm swr, pvc ( finolex or equivalent ) trapincluding cost of all materials, labour and t&p etcrequired for proper completion of the work. 97 providing and fixing 110 mm swr, pvc ( finolex or equivalent ) socket including cost of all materials, labour and t&p etcrequired for proper completion of the work. 98 providing and fixing 110 mm swr, pvc ( finolex or equivalent ) plain tee including cost of all materials, labour and t&p etc required for proper completion of the work. 99 providing and fixing 110 mm swr, pvc ( finolex or equivalent ) door tee including cost of all materials, labour and t&p etc required for proper completion of the work. 100 applying two coat tapcrete mixed with white cement and water to proper consistany on leaky surface including supply of allmaterials, labour etc. required for proper completion of work. 101 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. raj nagar plain white marble / udaipur green marble / zebra black marble. area of slab upto 0.50 sqm. 102 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work 103 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : ( a ) first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. ( b ) second layer of slurry of cement @ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 104 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with float glass panes of 4.00 mm thickness. 105 providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer incharge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) . 106 providing and fixing false ceiling at all heights with integral densifiedr armstrong false ceiling tiles of size 595x595 x12 mm of approved texture, design and patterns having nrc ( noise reduction coefficient ) of 0.50 ( minimum ) as per is 8225:1987, light reflectance of 85% ( minimum ) . non combustible as per bs:476 ( part 4 ) , fire performance as perbs:476 ( part 6 &7 ) , humidity resistance of 100%, thermal conductivity < 0.043 w / m k as per astm 518:1991, in true horizontal level suspended on interlocking metal powder coated t grid of hot dipped galvanised iron section of 0.40 mm thick on silhouette profile, rotary stiched double webbed white with 6 sub head : 26 new technologies and materials 1632 mm reveal profilewhite / black ) , comprising of main t runners of size 15x42 mm of length 3000 mm, cross t of size 15x42 mm of length 1200 mm and secondary intermediate cross t of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x2 mm. galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. 26.23.1 with 12 mm thick armstrong miniralfobre sound absorbing sheet including cost of all materials, labour and t&p etc. required for proper completion of the work. 107 providing and fixingacp in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) : with acpof 4.0 mm thickness 108 attending to petty maintenance service like plumbingservice, welder service, mansion service and carpenter servicerequired as below.job attending by one no.lumber / welder / mason / carpenter with oneno. helper per hour or part of an hour. 109 supply and fixing of 8 mm table top glasswith edge polish all respect as approved by e / i. 110 providing & fixing oflamination both side on flush door complete with all fittings ( excluding cost of door lock & door closure ) , etc all complete all complete as per drawing, specification and direction of engineer incharge. 111 providing , making & fixing 0.45 m depth wooden cabinet as per drawing from seasoned wood of19 mm , 12mm comm ply the final surface of both side to be finished with 1mm thickmica gorove to be painted or polished includingcost of all fitting ( ie lock, handle etc ) , materials, labour and t&p etcrequired for proper completion of the workapproveddesign by e / i. 112 providing& making& fixing of wall panneling as per drawing from claded with 12mm water proof & fire retardent ply & final surface to be finised with 5.5 mm thickmdf & 1mm laminate complete with painted or polishedas per the approved desin all complete as per drawing, specification and direction as approved by e / i . 113 supply and fixing brass polished 200 mm doorhandle set with lock body godrej or equivalent makeits fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, t & p etc. required for proper completion of the work. 114 providing and laying two coats of pidifin 2k ( pidilite make ) as per manufacturer’s including supply of all materials, labour and t & p etc required for proper completion of work. 115 existing old damage tile and fixing newfalse ceiling with 12mm thick arm strong fire resistant gyp board false ceiling system of approved type fixed to a withrequired hanger including supply of all materials, labour and t & p etc required for proper completion of work 116 supply and fixing of concelled cistern with wall mounting frame & instalation kitmodel no cib 31801011xw 2400ws with control plate lemon design model no cis chr 31204190 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 117 supply and fixing of concelled cistern control plate lemon design model no cis chr 31204190 of jaquar make as approved by e / i.the work includes cost of all labour, material t&p for proper completion of work . 118 supply and fixing of jet spray model no ahs 1557 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 119 supply and fixing of of waste coupling of make model no ald 705l130of jaquar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 120 supply and fixing ofhealth faucet model no ald chr 565 with 1.00 mtr long flexible tube in chrome finish and wall hookof jaquar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 121 supply and fixing of wall hung model no cns 951s size 536x370x370 with normal closing seat cover with rack bolt ( ss ) model no zps sns rb 01 of jaquar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 122 supply and fixing of two way bib cock with wall flange model noopp 15041pm of jaquar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 123 supply and fixing of prismatic wall mounted basin trap ( auto closed ) with wall flange for model no ffl 1093 of jaguar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work 124 supply and fixing ofbib cock with wall flange model no opp 15037pm of jaguar make or equivalent. make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 125 supply and fixing ofrack bolt for wc model no zps sns rb01 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 126 supply and fixing of wax seal model no zps wht 1401 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 127 supply and fixing of solenoid valve model no zsn chr 032 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 128 supply and fixing of cistren base plate model no zmp chr 003 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 129 supply and fixing of cistren wall cock model no zmp chr 002 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 130 supply and fixing of cistren syphon model no zmp chr 001 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 131 supply and fixing of conector pipe model no zps wht cp01 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 132 supply and fixing of brass inlet fixing model no zps brc 5007of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 133 supply and fixing of rubber gasket inlet model no zps blk 1403 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 134 supply and fixing of press matic button with spendlemodel no zms chr 427 of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work . 135 supply and fixing of sencer for urinal of jaquar make as approved by e / i. the work includes cost of all labour, material t&p for proper completion of work. 136 supply and fixing of sencer urinal battry the work includes cost of all labour, material t&p for proper completion of work . 137 providing & making & fixing of wall pannelingas on damaged surface the surface cladded with 6mm water proof & fire retardent ply fitted with the help of nails sulution on wall surfaceas per the approveddesign all complete as per drawing, specification and directionas approved by the architect / engineer in charge. 138 repairing of12 mm toughned glass door with all hardwareas per design with edge polish m / c top & bottom pivot and bottom lockwith handle all complete as per drawing, specification and directionas approved by the architect / engineer in charge. 139 supply of mar keen cloth for binding file required for proper completion of the work. 140 supply of labor for binding file and sifting file and furniture required for proper completion of the work. 141 repairng ofold cushioned single seater sofa of sb extn building, removing of old damage upholstery then wooden frame repairing and re polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of sofa using 50 mm thick sleepwell foam 32 denstry, approved. the work include cost of all labour, material t&p required for proper completion of work. 142 repairing of wooden cabinet door fitted at diffrent cabin .door made with 19 mm swastik board then proper fiinsh with the help of 1mm thick laminate after then one no lock and one no handle fitted in cupboard , the work include cost of all labour, material t&p required for proper completion of work. 143 repairing ofof executive office computer work station cum work table of size 1500x900x750 in diffrent room of shakti bhawan extn. building. top surface finished with approved quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. . onenumber lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered..the work include cost of all labour, material t&p required for proper completion of work. 144 providing and fixing superior, approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings at diffrent cabinof shakti bhawan extn, lucknow as per direction of engineer in charge. the work includes cost ofall labour, material and t&p etc. 145 repairing of old cushioned officer chair at sb extn building, removing of old damage upholstery then wooden frame repairing and re polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of chair using 50 mm thick sleepwell foam 32 denstry, the work includes cost ofall labour, material and t&p etc. 146 providing & fixing of roller blinds of approved shade as per drawing & specificationas approved by the architect / engineer in charge. 147 replacing of old steel almirah damage handle with new one of chrome plated handle as approve by engineer in charge. 148 replacing of old damage lock with new one of approved quality for suitable fixing in almirah as approved by engineer in charge. 149 replacing of old damage lock plate with new one as directed by engineer in charge. 150 replacement and fitting of toughned door lockwith new one .corner patch lock ozone make model no opl 1estdsss the work includes cost ofall labour, material and t&p etc. 151 replacement and fitting of toughned door bottom patch or top patch with new one .corner patch lock ozone make model no osspf 3estdsss the work includes cost ofall labour, material and t&p etc. 152 repairing of revolving chair in commeti room with the help of repacement hydrolic , base plate etc including cost of all material, labour t&p required for proper completion of the work . 153 repairing and weaving of wooden chair in s.b extn building .repairing and weaving of wooden chair back and base .the work include cost of all labour, material t&p required for proper completion of work....

Nagar Panchayat - Uttar Pradesh

39340058 manufacturing, supplying and fixing retro reflective overhead signage boards made up to 2mm thick alluminium sheet, face to be fully coverd with high intensity and encapsulated lens type heat activated retro refletive sheeting conforming to type iii of astm d 4956 01:67 2001 in silver white blue colour back back ground and with high intensity grade, pasted on substrate by presure sinsitive adhesive backing which shall be activated by applying pressure conforming to class ii of astm d 4956 01 and fixing the same to the plate of structural frame works by means of suitable sized aluminium alloys, rivets or bolts & nuts@300 mm center to centre all along the periphery as well as in two vertical rows along with thefit resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriates priming coat, the rate included the cost of rounding off the corners, lowering downthe structural frame work from the gantry, fixing and erecting the same in positionall complete as per drawingg, specification and direction of the engineer in charge. ( stuctural frame work including m.s. plate to be provided separately. rectabgular area of the sheet only shall be measured for payment ) dsr2018 s.no. 16.60...

Kisan Sahkari Chini Mills Limited - Uttar Pradesh

39297541 work of supply thermal insulation at boiler ( lagging ) , insulation / lagging , thermal insulation by providing light raising bonded slap ( lrb pad ) density 100 kg / m3 & cladding with aluminium sheet 22 swg g.i. wire, 20 swg fixing of g.i. screw pan hea 8 x 13 mm by grooving all joint with necessary overlap etc. job involve the work of cleaning of surface arera if required for insulation at different stations / as per instruction by chief engineer / chief chemist, with matrial as per isi norms ( thickness of lrb slap 100mm ) ...

Indian Army - Uttar Pradesh

39213072 tender for outline trade proc plan (otpp) items for fy 2022 23 1 ch knd/niv/cl2/209 to 212 short cotton light og (modified design) 241419 nos cqa(t&c)/tc 1518(d) (t&c) 2 k3 knd/niv/bk/65/ blanket superior og 91986 nos s/5056/blanket superior og/tc 1 (b)/2019 (t&c) 3 ce 8405 004571 to 4586 trouser serge polywool 1973 patt modified (all sizes) 138864 paa cqa/tc 15/8 (b) (t&c) 4 cf 8405 000248 to 259, 261 & 266 hat gorkha complete with chin strap all sizes 27004 nos ind/tc/1546 (t&c) 5 cc2 knd/niv/cl2 34 to 41 shirt men angola drab polywool modified patt 2012 64497 nos ind/tc/4552(g) (t&c) 6 ch 8405 001686 to 001701 trouser drill khaki 1973 pattern (modified) all sizes 219561 nos cqa(t&c)tc 155/8(d) (t&c) 7 cd knd/niv/cl2/252 to 255 pt shoes (sports footwear)all sizes 26734 prs ind/tc/4968 (t&c) 8 cb 3510 000045 laundry press commerical tailor 226 nos jss:3510 05:2015 (gs) 9 ca 8305 000240 cloth flannel grey for hospital 4486 mtrs is:674 1987 (reaffirmed) 2022) (t&c) 10 cb knd/niv/cl2/100 belt waist (modified) 139862 nos prov/ind/tc/1550 (t&c) 11 cr 8455 002001 sashes worsted 648 nos ind/tc/1549 (t&c) 12 ca 8310 000020 sewing cotton thread 100 dtex x 6 khaki 50m/tube 17879 nos is:1720 1978 (t&c) 13 ca 8305 000051 cloth calico cotton white bleached 91 cm 15283 mtrs is:1544 1973 (t&c) 14 ca 8310 000050 sewing cotton thread 165 dtex x 27 og 1000m/tube 280 nos is:1720 78 (t&c) 15 ca 5210 000260 square tailor wood 60mm x 300 mm 1475 nos ind/gs/2396 and ss no cqa(gs)ss/411(a) (gs) 16 cb 8455 000361 title emb og kumaon 3598 nos s/3338/b/tc 15/arms ti tele/dgncc (t&c) 17 ch knd/niv/cl1 170 rain cape multipurpose distruptive (poncho) 125124 nos cqa(t&c)tc 1518(d) (t&c) 18 cf 8405 000875 cover water proof for sikh personnel 1171 nos ind/tc/4145 ( 19 cc knd/niv/cl1/213 bag kit universal mk 2 52799 nos s/2532/bag kit universal (og)/tc 6 (t&c) 20 cc knd/niv/cl1/179 to 186 combat t shirt all sizes 315578 nos s/3368/combat t shirt/tc 15 (t&c) 21 cc niv coat combat with digital camouflage print (all sizes) 686656 nos s/2594/b/tc 15 (t&c) 22 cc knd/niv/cl1/241 tracksuit (pt uniform) all sizes 1278589 nos tc/01 2021 (t&c) 23 cc niv combat uniform digital pattern as a set of jacket, trouser & cap for male 1174960 sets prov/s/2599/tc 1(a) 2022/01 (t&c) 24 cm knd/niv/clo 2/385 to 387 socks ecc all sizes 1010718 sets prov specn no.5/5094/prod imp/socks ecc/tc 1(b)/2018 (t&c) 25 cm knd/niv/92 to 94 coat ecc (all sizes) (imp version) 58658 sets s/3558/a/tc 15/coat ecc with amdt no 1 to 5 sheds no cqa (t&c)/tc15/8(a) (t&c) 26 cm knd/niv/cl2 11,30 31 gloves ecc (modified) outer and inner all sizes 80288 sets dmsrde/ff&it/2007/466/1(b) and prov specn no dmsrde/ff&it/2007/466/2(b) with amdt no. 1, cost sample and schedule no cqa(t&c) tc 15/8(d) (t&c) 27 cm knd/niv/cl2 46 to 50 underpant woollen (imp version) 146980 prs prov/s/5094/tc 12/2012/02 (t&c) 28 cm knd/niv/cl2/23 to 29 vest thermal (all sizez) 911889 nos s/5503/tc 12/2011/01 (a) (t&c) 29 a3 knd/niv/camp/66, 123& 124 bag sleeping lt weight all sizes 88315 nos prov specification no. 5/6421/bag sleeping lt wt/tc 6 with amdt no . 1 & 2 (t&c) 30 a3 knd/niv/camp/49 googgles all terrain (improved) 201377 nos cqa(gs)/prov/gs 5/1/2012 ( c ) (gs) 31 cm knd/niv/cl2/102 to 104 cap balaclava og (improved) 473385 nos s/5094/tc 1(b)/ cap bal og (imp) (t&c) 32 cm knd/niv/cl2 12 to 21, 32, 33,44 & 64 trouser ecc (all sizes) 67484 nos s/3558/a/tc 15 trouser ecc (twc & tsp) (b) with amdt no. 1 (t&c) 33 cn 8465 000673 cover mess tin 24250 nos ind/gs/1959 ( c ) (gs) 34 cf 8405 000610 pag og 15221 nos ind/tc/0016(03) (t&c) 35 cc2 knd/niv/cl2/248 first field dressing (ffd) 301299 nos prov/5/4665/tc 1(a)2016/01 (t&c) 36 cd 8430 000007 to 32 boot ankle leather print grain for gp (all sizes) 121722 prs jss 8430 11:2016 (revision no. 1) (t&c) 37 cn knd/niv/cl2/249 elbow & knee pads 85495 sets cqa(gs)/prov/gs 5/1/2018/01 (gs) 38 cf 8415 000318 to 332 helmet crash dr mk ii all sizes 2126 nos cqa(gs)/us/482 (gs) 39 cc2 8465 000030 cord disc identity 82562 nos jss:8465 1 2013(rev no. 3) (t&c) 40 cf 8405 002001 to 2006 kullah dome shapped og 2876 nos tc/clo/222(b) (t&c) 41 cn 8465 000804 caps knee 31070 nos ind/tc/3263 ( c ) (t&c) 42 cc2 8415 000360 to 362 gloves protective size s/m/l 1713 prs imd/tc/3414 ( c ) (t&c) 43 cc2 8415 000011 gloves protect elect s/10 type 2 1087 prs 4770 1991(r.a 2017) & ss no cqa(gs)/ss/424 (gs) 44 cc2 8415 000186 gloves working size s/2 294 prs ind/tc/3415(a) (t&c) 45 cc2 8465 002002 face mask antimine universal type 4810 nos dmsrde/t&gs/84/314 (gs) 46 cc2 8465 000029 disc identity aluminium round 57556 nos jss:8465 2 2005(rev no. 1) (gs) 47 cn 8465 000675 whistle ball 5903 nos ind/gs/1430(d) (gs) 48 cd 8335 000016 to 18 nail tips heel toe 5644 kgs ind/gs/1023 ( c ) (gs) 49 cd 8430 000033 to 42 boot short knee rubber (all sizes) 21374 prs ind/tc/3484 (t&c) 50 cm knd/niv/cl2/22 hot water bottle rubber 279093 nos is: 1867 1975 ra2017 (gs) 51 cn 8465 000802 carrier man pack mk i 28721 nos cqa(gs)/us/404/ ( c) (gs) 52 a3 knd/niv/camp 02 mattress glacier (ecc&e) 10433 nos ind/gs/1910 (t&c) 53 a3 knd/niv/camp/79 & 80 mattress mk ii (imp ver) 122152 nos s/6252/a/tc 6 (t&c) 54 cm knd/niv/cl2/205 to 228 snow boot 196967 prs s/7232/snow boot/tc 13/1 (t&c) 55 a3 7240 000035 tank mule alluminium high altitude 1716 nos ind/gs/1586( c ) & drg no gcf/20/sk 689(a) (gs) 17521 5840 57 ca 8305 000072 cloth cotton drill white bleached 71 cm 6515 mtrs is:177 1989, fourth revision, reaffirmed 1997, v. no.3 (t&c) 56 pack with alumimium frame (modified) cn knd/niv/cl2/7 nos prov/ind/tc/1550(with amdt no. 1) (t&c) 58 k1 7105 000064 rack steel adjustable 2381 nos jss: 7105 :17 2016 rev no 3 (gs) 59 k1 7320 000158 table folding cook house mk iv ss top 2586 nos jss: 7320 07= 2016 rev no 2 (gs) 60 k3 7210 000038 counter pane hospital 3633 nos jss: 7210 03:2010 rev no.1 (gs) 61 k3 7830 000008 rope skipping 2.5mtr 9480 mtr c/t&c/tc 5/7(b) (t&c) 62 k2 knd/niv/bk/86 bed stead iron hospital mk iii 2457 nos cqa (gs)/prov/bsih mk iii/1/gs 5/2017(a) (gs) 63 k6 7350 000116 tray mess compartment ss (army patt) 4488 nos is=/4756/2000&cqa(gs)/ss/526/ (gs) 64 k6 7330 000243 sieves atta circular 400mm dia 378 nos jss:7330 55=2015 rev no. 03 (gs) 65 k6 7330 000079 utensil cooking 45 men set lid degchie 305mmno.2 1175 nos jss:7330 32=2015 rev no.03 (gs) 66 k6 knd/niv/bk/24 strainer tea stainless steel 120mm bowl 2896 nos cqa/gs/us/490 (gs) 67 k6 knd/niv/bk/20 uc 4 6 m/set roll pin wooden leng 300mm 5782 nos cqa(gs)/us/498 (gs) 68 k6 7330 000118 container 9 ltrs 340 nos jss:7330 22 2018 rev no.4 (gs) 69 k1 7105 000010 boxes ice small 1706 nos jss:7105 24=2014 rev no 3&gss 60 =2014 (picks) (gs) 70 ce 8405 000035 to 38 shirt cotton white for cooks size 1 to 4 20905 nos ind/tc/4509(i) (t&c) 71 k1 7105 000103 table bed side steel 642 nos jss: 7105 26=2020 rev no .1 (gs) 72 k1 7105 000102 table gs med mk ii 115 nos jss: 7105 29=2014 @ (gs) 73 k6 7330 000051 utensil cooking 4 men set degchie large 792 nos jss:7330 45=2010 rev no.2 (gs) 74 k6 7310 000001 stove oil wickless no.100 complete 673 nos is:1342 2002 latest & gs/ss/397(b) (gs) 75 k5 7330 000516 chest treasure small mk ii 15 nos ind/gs/1167(d) (gs) 76 k1 6530 007652 table overbed invaild steel 36 nos is=4494 latest & ss no cqa (gs)/ss/347 (gs) 77 k1 7105 000029 boxes counter clerk 16 nos ind/gs/405(e) (gs) 78 k6 knd/niv/bk/40 stainless steel parat med with lid 2635 nos cqa (gs)/ss/545/2014 to is: 44756 2000 ra 2009 (gs) 79 k6 knd/niv/bk/54 tumbler ss 300 ml 94789 nos is=14756 2000& ss no cqa(gs)/ss/523 (gs) 80 ce 8430 000536 to 542 slipper men s rubber black s/5 to s/11 (all sizes) 9488 prs jss: 8430 08 2014 rev no 1 amdt 1 (t&c) 81 k6 6640 005550 stainless steel thermos 1 ltr 3397 nos jss: 6640 66 2014 (gs) 82 k6 6530 001480 basin wash aluminium 2687 nos jss=07=2014 (rev no.02) (gs) 83 k6 6670 000004 scale dial indicating hanging type 100kgx500gm 1323 nos is 1702 1968 (rs 1991) & cqa(gs)/ss/592 (gs) 84 k6 7340 000204 stainless steel meat chopper 2172 nos jss:7330 61 2014q (gs) 85 k6 7330 000083 uc 150 m/set degchie 650mm 5015 nos jss:7330 34=2016 rev no. 3 (gs) 86 k1 7240 000008 basket ration with lid 2543 nos ind/gs/1912q (gs) 87 k6 8110 000839 plastic container w/o lid (for carriage of fresh items) 41277 nos jss 8110 01:2019(rev no. 2) (gs) 88 k6 7330 000053 utensil cooking 4 men set degchie medium 4115 nos jss:7330 45(2010) rev no. 2 (gs) 89 k1 3510 000023 table laundry folding 712 nos ind/gs/10086(f)&cqa(gs)/ss/411(a) (gs) 90 k3 7810 000002 gloves boxing 230gms 554 prs jss:7810 01 2009(rev no. 2) (gs) 91 k3 7210 000066 cases mattress gymnasia 539 nos jss:7210 30 2016(amdt no.1) (t&c) 92 k2 6530 000001 bed stead child with deop side 156 nos jss:6530 12 2016(rev no. 4) (gs) 93 k6 7240 000004 tub iron galvanised 85 ltrs 1392 nos cqa(gs)/ss/570/2014 to is 4120 1967 amdt no. 1 (gs) 94 k5 ike 0429 hand cuff adjustable 210 nos jss:8465 31:2014 (gs) 95 k5 6670 000014 scale beam indicating 5 kg 2064 nos ind/gs/1700 (gs) 96 k3 7830 000001 ball medicine 3.2 kg 4440 nos ind/tc/3936(h) (gs) 97 k3 7210 000014 cloth table hospital 2056 nos jss: 7210 07:2019 (rev no. 2) (gs) 98 k5 3740 000085 sprayer insecticide mannually carried compression hand operated knapsack 175 nos jss:3740 02=2020 rev no. 3 (ee) pune 99 k6 6670 000003 scale beam indicating hanging type 15 kg x 200 1106 nos jss: 6670 05=2010 (rev no. 3) (gs) 100 k6 7330 001292 frying pan multipurpose 8 copper bottom 1146 nos cqa(gs)/ss/515(a) to is: 15960=2013 ra 2018 (gs) 101 k3 6530 001471 stretcher amb mk ii sling mk 5 1298 nos ind/gs/1817(a) (gs) 102 ck 8410 000060 saree white with blue border 2488 nos jss:8410 02=2020 rev no. 4 (t&c) 103 ck 8410 000059 saree light blue 1848 nos jss:8410 05=2020 rev no.1 (t&c) 104 k2 knd/niv/bk/85 multipurpose army fd cot cum stretcher 281 nos is: 7308:1994 os (gs&c) 105 k1 7330 000182 squezer lemon 1885 nos cqa(gs)/us/549/2013 (gs) 106 k1 7105 000090 glasses looking mk iv 84 nos jss:6530 02:2021 rev no. 4 (gs) 107 k5 7920 000017 broom push 280 mm bristle 2797 nos jss:7920 15=2014 rev no 4 (gs) 108 ch 8405 000053 to 0000064 trouser drill white bleached s/1 to s/6a 12200 prs 2076 11 ( c ) 416/02 (t&c) 109 ck 8410 000062 to 65 skirts white stripped s/1 to s/4 402 nos tc/clo/173(d) (t&c) 110 k6 5120 423117 uc 4 6 men set slab wooden 3325 nos jss:5120 61:2019rev no.1 (gs) 111 k6 7330 000065 utensil cooking 45 men set katorah no.2 3830 nos jss:7330 31 2015 rev no. 3 (gs) 112 k5 7310 000615 electric kettle 406 nos is:3671993(latest) (gs) 113 k1 7125 000041 cabinet storage meat & milk 6892 nos jss:7125 01:2018 rev no. 3 (gs) 114 ck 8435 000001 to 000006 slipper rubber red s/2 to s/7 558 prs ind/tc/3797/ ( c ) (t&c) 115 k5 6260 000222 lantern kerosin high altitude mk i 839 nos ind/eng/dev0065(d) drg no ega 175/1(a) (rdee) 116 k5 knd/niv/bk/43 tea container (capacity 15 ltr) 826 nos cqa(gs)/us/500(a) (gs) 117 d1 3770 000042 bukle iron roller double 22 mm 620 nos ind/gs/377(d) (gs) 118 d1 3770 000625 peg picketing mk ii 6286 nos ind/gs/1819 (gs) 119 d1 3770 000405 head bridle su large 1245 nos ind/gs/1544 (gs) 120 d1 3770 000812 horse shoe cavalry mk ii no.6 fore 11570 prs ind/gs/1906 (gs) 121 d1 3770 000315 crupper pa large 2187 nos ind/gs/1576 (gs) 122 d1 3770 000808 horse shoe cavalary mk ii no.4 fore 1662 prs ind/gs/1905 (gs) 123 d1 3770 000155 bits bridoon pmg mk 2 small 1482 nos ind/gs/68(c) (gs) 124 d1 3770 000423 head stall gs 6545 nos ind/gs/665(a) (gs) 125 d1 3770 000506 lining felt brown long no.2 2634 nos ind/gs/1269(c) (gs) 126 d1 3770 000394 girth su med mk ii 643 nos ind/gs/644(e) (gs) 127 d1 3770 000933 surcingle su large 336 nos ind/gs/1195(c) (gs) 128 d1 3770 001025 frings brow band 4314 nos ind/tc/3357(h) (gs) 129 d1 3770 000811 horse shoe cavalry mk ii no.5 hind 12432 prs ind/gs/1905 (gs) 130 d1 3770 000816 mule shoe mk ii no 4 1622 prs ind/gs/1904 (gs) 131 d1 3770 000203 bridle snaffle 198 nos ind/gs/599 (gs) 132 d1 3770 001081 shackle mule no.2 mk 4 977 nos cqa(gs)us/430 (gs) 133 h2 8310 000074 thread cotton ind 500 stex x 4 unbleached 782 kgs is:1720 1978(2nd rev) ra 2012 (t&c) 134 d1 3770 001066 blanket saddle ma 1461 nos ind/tc/1405(i) (gs) 135 d1 3770 000606 pad vaulting 117 nos is:580 1973(ra2009) (gs) 136 d1 3770 000330 strap upper rear for attachment girth 4115 nos ind/gs/1760 (gs) 137 d1 8330 000018 leather buffalow curried back medium 7444 kgs is: 580 1973(ra 2009) (gs) 138 h2 8330 000017 skin chamoos leather grade a 1319 nos is: 1017 $ cqa(t&c)tc 13 123 (t&c) 139 h2 8330 000001 leather chamois skin grade ii 4755 nos is:1017 1983(ra 2014)&cqat&c/tc 13/27 (t&c) 140 d1 8330 000019 leather buffalo curried back light 442 kgs is: 580 1973 (ra 2009) (gs) 141 d1 3770 000508 panel pgs lining felt brown short no 1 10647 nos ind/gs/1269(c) (gs) 142 d1 3770 000765 saddle su pattern 2 attac v girth near 438 nos ind/gs/572(c) (gs) 143 d1 3770 000400 hammer peg picketing mk ii 411 nos ind/gs/1173/gs/1a3 (c)ind/gs375/cc for head ind(gs)1085 (c) (gs) 144 h2 8315 000309 tape niwar og 13 mm 13558 mtrs ind/gs/1269(c) (t&c) 145 d1 3770 001023 cover horse mk iii small 2464 nos ind/tc/2566 (gs) 146 d1 3770 000341 starp neck hpd points 720 nos ind/gs/1732 (gs) 147 d1 3770 000671 reins driving long 187 nos e&s 458 (i) (gs) 148 d1 3770 000973 traces wire hmd long 84 nos ind/gs/553(b) & drg no : ind gs/1600(c) (gs) 149 d1 3770 000329 cut components att v girth strap u/frnt 4449 nos ind/gs/1762 (gs) 150 d1 3770 000814 mule shoe mk 2 no.3 fore machine 8133 prs ind/gs/1904 (gs) 151 d1 3770 000844 strip girth pa mk 2 3650 nos ind/gs/1645 (gs) 152 h2 8305 000231 felt jute needled soft 3mm thick 3026 mtrs ind/tc/2450(g) (t&c) 153 h2 9320 000017 sheet rubber solid black 200cm x 100cmx 10.0mm 270 mtrs is: 5192 1994,ss nocqa(gs)ss359(b) (gs) 154 d1 3770 000662 rack cleaning stable 506 nos ind/gs/980(e) (gs) 155 d1 8465 000683 carrier man pack base plate bipod brl 81mm 546 nos ind/gs/1889(a) (gs) 156 d1 3770 000666 rein bridoon pgs 705 nos ind/gs/646(d) (gs) 157 d1 3770 000603 pad quarter pack saddlery mortar 3 in leather 1382 nos ind/gs/621(b) (gs) 158 d1 3770 000269 collar head pgs extra large mk i 1467 nos ind/gs/1292(b) (gs) 159 d1 3770 000002 brush animal grooming 1121 nos ind/gs/1602(b) (gs) 160 d1 3770 000820 mule shoe mk 3 no.4 hind 3567 prs ind/gs/1904 (gs) 161 d1 3770 000813 horse shoe cavalry mk ii no.6 hind 3289 prs ind/gs/1905 (gs) 162 d1 3770 000593 nail bulock shoe no.5 capwel/mustar band 3204 kgs ind/gs/1923 (gs) 163 h9 5330 007300 asb sh compr n/metallic 1850x1250x0.25 645 kgs is: 2712 1979 gde 0/1 (gs) 164 d1 3770 000243 clippers hair mule plate top 655 nos cigs/t&i/36(b) (gs) 165 h2 8315 000311 tape niwar og 40mm 6340 mtrs is: 1895 1982 (amdt no:1) (gs) 166 d1 3770 000912 strap martingale stable 1525x19mm 166 nos ind/gs/668(b) (gs) 167 d1 3770 000818 mule shoe mk iii no.2 hind 3747 prs ind/gs/1904 (gs) 168 h2 8315 000312 tape niwar og 50mm 5441 mtrs ind/gs/1269(c) (gs) 169 d1 8465 000681 carrier man pack base plate bipod brl 81mm 780 nos ind/gs/1891 (gs) 170 d1 3770 000839 strap cloak centre su 710x19mm fixed keeper 214 nos ind/gs/1337© (gs) 171 d1 3770 000591 nail horse shoe no 3 4056 kgs ind/gs/1623 (gs) 172 d1 3770 000502 leather stirrup su 439 nos ind/gs/668(b) (gs) 173 d1 3770 000612 pannel pgs no.2 126 nos cigs/us/309 (gs) 174 d1 3770 000674 rin leading leather with trees 1348 nos ind/gs/1513(c) (gs) 175 h2 4020 000148 rope hemp hawserlaid 24mm dia 2047 mtrs is:5176 1985 gde 1 (t&c) 176 d1 3770 000232 chain steel twisted link 4340 nos ind/gs/1662(c) (t&c) 177 d1 8465 0000684#1 protactor shoulder carrying 81mm mortar 897 nos ind/gs/1892 (gs) 178 d1 3770 000226 cavison 211 nos ind/gs/1658(d) (gs) 179 h2 8305 000142 cloth c heavy 72 cm wide 70055 mtrs is:3751/1993 (t&c) 180 h2 4020 000467 rope p/proplylene 3 strand khaki 12mm dia 2819 mtrs is:5175 2014 3rd revision (t&c) 181 d1 3770 000241 clippers hair mule with tin plate cap 686 prs ind/gs/506( c ) specn no cicg/t&1136(b)cs ds (gs) 182 d1 3770 000807 horse shoe caval mk 2 no.3 hind 3384 prs ind/gs/1905 (gs) 183 h2 9320 000016 sh rub solid black 200cm x 100cm x 6.0m 264 mtrs ind/gs/572(c) (gs) 184 h2 4020 000139 rope hawserlaid rot proofed undyed 14mm 1440 mtrs ind/gs/572(c) (gs) 185 d1 3770 000757 saddle su pattern 02 medium 4415 nos ind/95/572/c, ind/gs/526(c) (gs) 186 h2 8305 000232 felt jute needed soft 6mm thick 1017 mtrs ind/tc/2450(f) (t&c) 187 d1 3770 000843 strap collar crupper pa 38x39 1516 nos ind/gs/1229(a) (gs) 188 h2 4020 000143 rope hemp hawserlaid 10mm dia 9564 mtrs is:5176 1985 (grade 1) (gs) 189 d1 3770 000264 coller head pgs large mk i 2323 nos ind/gs/1592(c) (gs) 190 d1 3770 000107 rug horse racing large back length 1.5m 606 nos ind/tc/3005(a) (t&c) 191 d1 3770 000108 rug horse arctic medium 1593 nos ind/tc (t&c) 192 h2 knd/niv/tmat/92 cloth duck polyster cotton rip stop 380gm og 91cm wide 14378 mtr 13510 2000ur iv (table 1 of 1 clause 5.1) (t&c) 193 j1 8340 000114 tent operating mk ii wall short right 142 nos ind/tc/2189(h) (t&c) 194 j1 8340 000609 cover gas proof fumigation extra large 103 nos jss:8340 40 2015 (t&c) 195 j1 7105 000005 bag bed stead camp officers mk iv 1233 nos ind/gs/1548(a) (gs) 196 j1 7105 000004#1 bed stead camp officer mk iv 17694 nos jss7105 30:2014 (gs) 197 a3 knd/niv/camp/25 karabiner s type 7365 nos dmrl/nnsg/s 1815/1 (gs) 9643 3214 199 a3 knd/niv/camp/83 tugger snow shoes 9678 nos ex import (gs) 200 j1 4240 000484 bag water proof 88639 nos jss 4240 03 2011 (t&c) 201 a3 knd/niv/camp/82 avalanche air bag with air safe 24320 nos ex import 202 a3 knd/niv/camp/33 fire star refil 150 gm 9364 nos dmsrde/f&l/2009470 dmsrde 203 a3 knd/niv/camp/27 drawers cold weather 102406 nos dmsrde/t&gs/458(a) (t&c) 19565 6522 205 j2 7310 000184 burner assembly cobl mk i 2657 nos ind/gs/688(a) (gs) 206 j1 5430 000044 tank fabric collapsible cover mk i 2570 mm dia 19 nos jss:5430 01:2013 (t&c) 207 j1 8340 000666 pin tent wood mk 2 large 600mm 2385 nos is:2133 1983cqa(gs)/ss340(b)) (gs) 208 j2 7310 000113 cobl burner casing mk 2 2894 nos ind/gs/559(l) (gs) 209 j1 7210 000069 cover bedding flame proof olive green 267 nos ind/tc/3054(a) (t&c) 210 j1 6310 000007 ltv disc direction prg supporting 2061 nos dlm/89/2002 (gs) 211 j2 7310 000119 cobl burner vaporiser mk 5 236 nos ind/gs/559(i) (gs) 212 j2 7240 000322 can oil 4.5ltrs 11210 nos is:2087 1988ra2016 (gs) 213 j2 7330 000520 degchie outer 595 nos ind/gs/1709(a) (gs) 214 j1 7520 000067 boxes, sty telegraph eqpt unit b 482 nos jss:7520 03:2014 (gs) 215 j1 8340 000073 line bracing for shelter poratable no.3 274 nos cit&c/tc 6/13 (t&c) 216 j1 8340 000112 walls long for tent operating mk ii 318 nos ind/tc/2189(h) (t&c) 8415 002557 a3 8415 002558 to 2560 198 204 poncho glacier cap glacier (t&c) a3 nos nos ind/tc/4674(b) ind/tc/4180(b) (t&c) 217 j2 7310 000181 cooker oil blow lamp mk i complete 1409 nos ind/gs/1688 (gs) 218 j2 7330 000877 plate chapati oil cooker mk i 349 nos ind/gs/1686(b) (gs) 219 j1 7240 000024 bag basin camp 2991 nos ind/gs/1128(e) (gs) 220 j2 7310 000120 cobl cap filling mk ii 2697 nos ind/gs/1128(e) (gs) 221 j1 8340 000109 tent opreating mk ii fly outer 84 nos ind/tc/2189(h) (t&c) 222 j1 8340 001120 universal member for tefs 54454 nos (gs)/us/467(e) (gs) 223 j1 8340 000015 screen latrine mk 3 screen 6840 nos jss:8340 32 84 (t&c) 224 j1 6810 000007 chhaugal universal 125822 nos 15:580 1973cra2009 (t&c) 225 j1 knd/niv/camp/70 tefs 4m unit w/mild steel jt & flooring 7736 nos ind/tc/2118 (t&c) 226 j1 knd/niv/camp/61 end curtain with pv dd fabric for tefs 4m 22725 nos ind/tc/2118(a) (t&c) 227 j1 8340 001118 3 way jt w/base plate, for tent extndbl 22738 nos cqa(gs)/us/487(e) (t&c) 228 j1 5430 000040 tank water canvas s type 230 ltrs body mk i 2374 nos oef/01/16580 (t&c) 229 j1 8305 003920 ground sheet tpo og 57881 nos jss:8305 35:2014 (gs) 230 j1 knd/niv/camp/78 cover water proof mk 1 pc 9.1x9.1m 9669 nos jss:8340 33.2013 (t&c) 231 j1 knd/niv/camp/60 tefs 4m unit f/outer pv d/dyed fabric 6308 nos ind/tc/2118(a) (t&c) 232 j1 8340 000650 shelter workshop light ia 35 nos drg no inga 0143 (t&c) 233 j1 knd/niv/camp/73 cover water proof mk i pc 2.0 x 2.0m 1417 nos jss:8340 33 2013 (rev no.2) (t&c) 234 j1 8340 000076 flap for shelter portable no.6 mk 2 98 nos cit&c/tc 6/13 (t&c) 235 j1 8340 000014 screen latrine mk 3 bag mk i 2935 nos jss:8340 39 2013 (t&c) 236 j1 5120 001447 shovel hand light blade 7020 nos ind/gs/1655(a) (gs) 237 j2 7310 000124 cobl pump burner mk ii 709 nos ind/gs/559(i) (gs) 238 j1 8340 001119 roof pole without three way joint for tent extendable frame supported 19994 nos cqa(gs)/us/467(d) (gs) 239 j1 8340 000108 tent opreating mk 2 fly inner 24 nos ind/tc/2189(h) (t&c) 240 j1 8340 001140 cross bracing for tent extndbl f/suptd 144740 nos ind/tc/2118(a) with amdt no. 1 (t&c) 241 j1 5110 001148 mamootie mk iv balde 351 nos ind/gs/815(c) (gs) 242 j1 8340 000515 tent pole standing no.6 765 nos is:7344 7 (gs) 243 j1 7105 000021 stool camp mk i 11044 nos jss7105 28:2014 (gs) 244 j2 7310 000112 cooker oil blow lamp burner 435 nos ind/gs/559(l) (gs) 245 j1 6310 000012 lt tfc vehicular arow dir p/120cm 4061 nos dlm/88/2002 (gs) 246 j1 8340 000653 shelter craftman plain 1a 89 nos ind/eng/prov/1219/ &ind/eng/prov/1210/6 (ee) pune 247 j1 8340 000010 salitah large for tents 94 nos jss:8340 18:2014 (gs) 248 j1 8340 000546 shelter portable no.6 upright 213 cms 207 nos imsa 0340&impd2200 (ee) pune 249 j1 7105 000084 table gs large mk ii 741 nos jss:7105 20:2016(3rd revision) (gs) 250 j1 8340 000543 sltr port no 2 str member roof intmed 179 nos imsa 0340&impd2200 (ee) pune 251 j1 8340 000654 shelter craft man mountain ia 24 nos ind/eng/prov/1210/6 & cqae/5340/636/a (ee) pune 252 j1 8340 000107 tent operating mk ii complete 51 nos ind/tc/2189(b) (t&c) 253 a3 5440 000044 ladder alluminium craveses 1307 nos cqa(gs)/gs/474 (gs) 254 j1 8340 000111 tent operating mk ii sheet ground 1171 nos ind/tc/2208(a) (t&c) 255 j1 8340 001847 covers, gas proof, fumigation size small 28 nos jss:034040 2015 (t&c) 256 j2 7330 000195 pressure cooker 6 ltr complete 8277 nos iss:2347:2017&cqa(gs)/ss/396(a) (gs) 257 j2 8340 001121 u pin for tent extendable frame supported 73068 nos (gs)/us/467(e) (gs) 258 j1 8340 000072 cover r/side sltr port no 3 110 nos na (ee) pune a3 8465 000131 mattress pneumatic dual shade white and og a3 knd/niv/camp/38 mattress glacier (scme) 260 j1 knd/niv/camp/129 four way joint with base plate for tefs (mild steel) 141154 nos dmsrde/es&s/2008/231 dmsrde 261 j1 knd/niv/camp/128 three way joint with base plate for tefs (mild steel) 114415 nos dmsrde/es&s/2008/231 dmsrde 262 a1 7710 000003 drum side 31 nos ind/gs/335(b) ind/gs/501© (gs) 263 a4 8465 000672 adjustable weapon case individual 2491 nos s/d usa 8465 261 4995 (gs) 264 a2 6350 000011 siren hand operated 12 nos cqa/(gs)/ss/402(a) to is: 6026 1985(ra 2010) (gs) 265 cc 8415 000315 gloves gauntlet port welder leather 866 prs ind/tc/3417(a) (t&c) 266 c3 2340 000106 bicycle cadet with leather top saddle in 619 nos ind/veh/4101/2009(i) cqa (v) 267 c3 2340 000107 cycle cadet women size 55 cms (with pvc top saddle) in 166 nos ind/veh/4101/2009(i) cqa (v) 268 g2 3439 000014 electrodes welding, steel hard surfacing 875 nos is:7303, classification e metal 269 g2 9515 000016 steel sheet carbon hot rolled 1800x900 7734 kgs is: 5986:2017(reaffirmed 2021), grade ish4105 metal 270 g2 9525 000028 wire brass soft 2.50mm 82 nos is: 2006 (reaffirmed 2021) hard metal 271 g2 5110 000787 punches spring complete 280mm 326 nos ind/gs/11 (f) metal 272 g1 9535 000172 copper sheet 1250x530x5.00mm 573 kgs is:14811:2000 (reaffirmed 2021) gd dhp hb in condition metal 273 g2 9510 000031 steel bar carbon hot rolled round 45mm 1488 nos is:2062:2011(reaffirmed 2021), grade 250 quality a metal 274 g2 9535 000018 aluminium sheet soft 0.71mm 460 kgs is:737:2008 (reaffirmed 2018) designation 19000 condition o metal 275 g2 9530 000300 gunmetal cast bar round 20.0mm 286 nos is:306 1983 (reaffirmed 2021) chill cost metal 276 g2 9510 000257 steel mild bright round 6mm 3124 nos is: 9550:2001 (reaffirmed 2021) mechinal properties in as cold condition (table 3) metal ind/gs/1910 259 120860 nos (gs) 277 g2 9515 000697 steel sheet carbon cold rolled 2500x900 4104 kgs is: 513 part i 2016 (reaffirmed 2021) designation general purpose grade r1 metal 278 g2 9520 000020 steel angles 90x90x10mm 2670 kgs is: 2062:2011 (reaffirmed 2021), grade e250 quality a and is 808: 2021 metal 279 g2 9515 000699 steel sheet carbon cold rolled 2500x90x1.25mm 1189 kgs is: 513 part i 2016 (reaffirmed 2021) designation general purpose grade r1 metal 280 g2 3439 000156 brazing alloy silver wire (with appropriate flux to be supplied seprately in a sealed 53 nos is:2927 metal 281 g2 9535 000014 aluminium sheet half hard 2.03 mm 493 kgs is:737:2008 (reaffirmed 2018) designation 19000 condition hx2 or hxg metal 282 w8 5660 000008 spool plastic with punched tape 50mtrs 115577 nos is: cqae/5660/1515/a (ee) 283 g2 9515 000130 steel plate carbon 25.00mm 1555 kgs is:1570 part 2 desgin 40 cb metal 284 g2 9510 000013 steel bar carbon hot rolled square 50mm 2322 nos is: 2062:2011 (reaffirmed 2021), grade e250 quality a metal 285 g2 9515 000709 steel sheet carbon hot rolled 2500x1000x3.15mm 1563 kgs is: 5986 2017 (reaffirmed 2021) grade ish4105 metal 286 g2 9515 000708 steel sheet carbon hot rolled 2500x1250x2.50mm 1553 kgs is: 5986 2017 (reaffirmed 2021) grade ish4105 metal 287 g2 3439 000147 electrode welding cast iron 4.00mm 607 nos is: 5511 classification metal 288 g1 4010 000056 chains iron or steel 108 g per metre 134 nos ind/gs/1568 (gs) 289 w8 5120 003495 wind lashing stick 1999 nos is:cigs/us/83(a) (ee) 290 sdles 8305 000963 surfacing hessian pre fabricated bituminized 2346 roll ind/tc/2249(a) (t&c) 291 g2 3439 000214 solder aluminum 5% copper 1.60mm 54 kgs proprietery article metal 292 sdles chd niv 01 sheet steel corrugated galvanized, length 166710 nos cqae/9515/1635/b (ee) pune 293 w8 5660 000078 punched tape concertina coil 1a 35164 nos is:cqae/5660/1602/b (ee) 294 w8 w8/niv steel barbed wire, a 3 106562 nos 278 2009 (ee) 295 g1 5320 001259 rivets solid copper hose tinned 22mm 223 nos drg no (igs/gs/8(b)) (gs) 296 g2 9505 000047 wire stl mild drawn glvd 2.00mm 19601 kgs is:280 2006 (reaffirmed 2021) 1/4 hard (with tensile to 600 mpa) galvanised, heavy coating metal 297 sdles chd niv 02 chd sheet steel corrugated galvanized length 2200mmxwidth 910 mm 26 nos cqae/9515/1635/b and is 277 (ee) pune 298 g2 9505 000027 wire steel mild bright 1.60mm 1702 kgs is:280 2006 hard (reaffirmed 2021) metal 299 g1 5310 001380 washers plain steel zinc plated 18mm 3881 nos is:2016 67 (rf 2011) (gs) 300 f1 5120 003032 swages top smiths 16mm (with eye handle) 1011 nos is: 842 68 & cicg/ss/62(b) (gs) 301 g2 9505 000046 wire steel mild drawn, galvanised 1.00mm 1036 kgs is:280 2006 (reaffirmed 2021) 1/4 hard (with tensile to 600 mpa) galvanised, heavy coating metal 302 g2 9515 000022 steel plate carbon 2200x900x8.00mm 1600 kgs is: 2062:2011 (reaffirmed 2021), grade e250 quality a metal 303 g2 3439 000025 electrodes welding, tool tipping 3.15mm 316 kgs is:7303:1974 (reaffirmed 2019) classification efe 2c metal 304 g1 5306 001226 bolt metric pre 8.8 coar pitch hex z/p m 10x100mm long 2417 nos is:1364:2002 (pt i) ra 2007 & bs:3380 1961 (gs) 305 g2 9510 000258 steel, mild, bright round 8mm 276 kgs is:9550:2001 (reaffirmed 2021) mech properties in cold condition (table 3) metal 306 g2 9505 000028 wire steel mild bright 2.0mm 551 kgs is:4413 1981(reaffirmed 2021)grade cuzn (annealed) metal 307 g2 9535 000291 lead sheet 2000x2000x1.6mm 317 kgs is:405 (part ii) :1992 (reaffirmed 2019) metal 308 g1 5315 000829 nails steel wire round 200mmx8.0mm 328 nos is:732 1972,ra 1990 (gs) 309 g2 9515 000134 steel sheet carbon spring 1800x900x1.60 111 kgs bs:1449 en42g or en42j, cold reolled and bright annealed metal 310 g2 9510 000270 steel, mild, bright round 50mm 9529 kgs is:9550 01&is 1570 79(r) metal 311 g2 3439 000148 electrode welding high alloy steel 2.50mm 196 kgs is:5206:1983 (reaffirmed 2019), classification e 2312 2 & e 25.20.2 metal 312 g2 9515 000717 steel plate carbon 3200x1000x10.00mm 445 kgs is:2062:2011(reaffirmed 2021), grade 250 quality a metal 313 g2 9530 000204 phosphor bronze rod round (cold rolled) 146 kgs is:7811:2019 metal 314 g1 5320 000766 rivets split oval head aluminum 3.5mm 1452 nos is:3974 1967 (gs) 315 g1 5320 000221 rivets countersunk flat head 90 degree s 480 nos is:2998 1982 (gs) 316 w11 3530 99 200 6709 sewing machine industrial beneral sewing 20 nos cqae/3530/1660 cqa (ee) 317 g2 9515 000701 steel sheet carbon cold rolled 2500x1250 461 kgs is: 513 part i 2016 (reaffirmed 2021) designation general purpose grade r1 metal 318 g2 3439 000154 brazing alloy silver wire (with appropria flux to be supplied separately in a sealed 45 kgs is:2927 1975 (reaffirmed 2019), grade ba cgag 6 or ba cgg10 or cgag15 metal 319 g1 5315 000838 nails steel spike square shank 150mmx11mm 6117 nos ind/gs/1667 sampling plan as per annexure b (gs) 320 g2 9535 000016 aluminum sheet half hard 4.06mm 47 kgs is:737 2008 (reaffirmed 2018), designation 19000 condition hx2 or hx4 metal 321 g1 5310 001311 washer plain copper tinned 5.3mm 116 nos is:5370 69 tp for grade s 15 (c ) of is:1359 69,is: 1359:1977 (gd 2.5c) (gs) 322 g1 5310 000563 nuts metric precision steel 8 hexagon m6 26230 nos is:1364 (part 6):2018 (gs) 323 g1 5120 001014 bars crow chisel and point 1.20mmx32mm 815 nos is : 704 1984 (ref 1990) (gs) 324 g2 3439 000109 rod welding aluminium 5% silicon 3.15mm 295 kgs is:1278 1972 (reaffirmed 2019) type sgn 21 metal 325 g2 3439 000093 rod welding steel mild 5.0mm 1298 kgs is:1278 1972 (reaffirmed 2019) type sfs 1 metal 326 g1 5315 000671 nails steel spike square shank 200mm x 14mm 487 nos ind/gs/1667 (gs) 327 g2 9525 000069 wire copper soft for general purposes 237 kgs is:4412 1981(reaffirmed 2021) condition o (annealed) metal 328 g2 3439 000089 rod welding steel hard surfacing 3.15 219 kgs is:1278 1972 (reaffirmed 2019) type s f 55 metal 329 g1 5325 000172 eyelet aluminium alloy no 32 12037 nos is:4084 1978 & cqa(gs)/ss/335 (gs) 330 g2 3439 000086 electrodes welding, aluminium 4.00mm 140 kgs proprietery article metal 331 g1 5305 002288 screw metric hex head coarse pitch prec 13767 nos is:1364 674 (gs) 332 g2 9510 000359 tool steel carbon square 20mm 309 kgs is:3748 1990, grade 133t3 metal 333 g2 3439 000085 electrodes welding, aluminium 3.15mm 89 kgs proprietery article metal 334 g1 4010 000064 chains iron or steel 620 gms per mtr 366 nos is:ind/gs/1568 (gs) 335 g1 5315 000824 nails steel wire round 13713 nos is:723 1972,ra1990 (gs) 336 g2 3439 000071 electrode electrodescutting solid 4.00mm 232 kgs proprietery article metal 337 g1 5310 001276 washer plain copper 13mm 68 nos is:5370 1969 (rs 2021) (gs) 338 g1 5315 000634 nails copper boat countersunk head square 37 nos is: 725 1961 (gs) 339 w8 8105 000196 hdpe sand bag khaki 872375 nos is:a/20494/db/w8/tfr (ee) 340 w8 5660 000085 picket y pattern 2 ft post fence 115038 nos is:cqae/5660/1609/e (ee) 341 f1 5120 001549 spanner ojde bs&w spear head normal series bs1x1/8 259 nos bs: 192 1971 (gs) 342 f1 3439 000391 soldering iron non electric straight 225 172 nos ind/gs/158(e) (gs) 343 f1 5120 000638 vices bench 75mm (without quick release) 509 nos is: 2586 86/rev 2 & cqa (gs)/ss/212 © (gs) 344 f1 5110 000219 knife hacking straight length 100x30m 1667 nos iss:5110 03 2015 (3rd revision) (gs) 345 f1 5120 003125 shovel light weight for skitroops 150 nos ind/gs/1425(e) (gs) 346 f1 5120 000787 extractor screw rigid no10 sets 23 nos jss:520 39:2014 (rev 2) (gs) 347 f1 5110 000294 saws hand cross cutting normal size 450 1231 nos iss:5098 1969 (ra)/1994 & cqa (gs)/ss/84 (c) (gs) 348 h5 1080 000009 ecsg 50mm grass green 1774 mtr iss: 1080 04 2015 (t&c) 349 f1 4930 000013 oiler hand lubricating conical 1510 nos ss. no cqa(gs)/ss/573/2014 (gs) 350 f1 8020 000024 brushes scratch 76mm 752 nos iss:820 07:2014 (rev 2) (gs) 351 h5 1080 000041 ecsg 50mm dark brown 93485 mts ind/tc/2069(b) (gs) 352 f1 5120 000095 pliers side cutting 200mm 218 nos is:3650 81, reaffirm 1991 & (c) (gs) 353 f1 5120 001012 bars crow chisel & claw ends 6015x29m 340 nos is:704 84(ra 1990) & ctgs/ss/79 (c) (gs) 354 f1 5210 000045 rules folding 600mm 648 nos drg no/ind/gs/1879(b) (gs) 355 f1 5120 000991 bars crow chisel & claw ends 1070xclaw 616 nos is:704 1984 (ra 1990) & cicg/ss/79© (gs) 356 f1 5110 001159 scissors 240mm 2584 nos is:989 82&ss no.cigs/ss/139(e) (gs) 357 f1 3415 000001 machines grinding h/bench type complete 250 nos ind/gs/1399(c) (gs) 358 f1 3439 000392 soldering iron non electric straight 455 68 nos ind/gs/158(e) (gs) 359 f1 5110 001092 saws folding complete (special for used on topical) 177 nos ind/gs/80 (e) ,ind/gs/ss/1189 (d) (gs) 360 f1 5120 000284#1 punches round 6mm 1600 nos is:413 1974 (ra 1994) & cqa(gs)/ss/472 (gs) 361 h5 1080 000010 ecsg 50mm mb green 17783 mtr jss:1080 04 2015 (gs) 362 f1 8415 000339 aprons canvas artificier 237 nos jss:8415 1980 is:6803 (gs) 363 f1 5110 000197 gimlets twist 5mm dia 1211 nos drg no ind/gs/1498(d) (gs) 364 f1 5120 000063 screw drivers phillips head 3x150mm 660 nos is:844 1979 & cqa(gs)/ss/486(c) (gs) 365 f1 5120 000992 bars crow bar chisel & claw ends 3006 nos is:704 1984 (ra 1990) & cicg/ss/79© (gs) 366 f1 5120 000220 mallet tinmans 659 nos ind/gs/524(e) & cicg/gs 418 (b) (gs) 367 f1 8020 400001 brushes paints and varnishes flat 12mm 8554 nos is:384 2002 and ss no cqa(gs)/ss/433 (gs) 368 f1 5120 000078 pliers parallel jaw 165mm 4659 nos ind/gs/544(e) (gs) 369 f1 5120 000283 punches round 5mm 7557 nos is:413 1974,readffirmed1992 (gs) 370 f1 5120 001814 spanner ojde a&u spear head normal series a/f 195 nos drg no cigs/gs 1/122/(d) & cigs/gs/1/11(a) (gs) 371 f1 8020 000027 brushes writing medium 2313 nos ind/gs/1036 (k) (gs) 372 f1 5120 000641 vices bench 125mm (quick release type) 979 nos is:2586 86(ra 2013) & cqa(gs)/ss/212 (e) (gs) 373 f1 5110 000841 nippers diagonal cutting nominal size 125mm(box joint) 1163 nos is:4378:1973 & cqa/gs/ss/350 (gs) 374 a4 6530 000020 stretcher folding light weight trestles 736 nos jss 6530 48ss no cigs/ss/319 (gs) 375 f1 5120 000560 wrench torque 0.400 mm 344 nos cicg/gs/1/3(d) & us drg no cigs/t&i /147(d) (gs) 376 f1 5110 000576 stamp steel for metal or wood letters a z sets 3mm 162 set ind/gs/507 (n) (gs) 377 f1 5120 003441 hammer claw 700gms fitted with handles 4408 nos is:6546 72&ss.nocigs/ss/214(b) (gs) 378 f1 5120 000030 hammers tinmans paining down 450gms 1056 nos ind/gs/375 © & drg no ind/gs/1205 (a) iss: 620 85 (rev 04) ra 2005 & cqa(w)/ss/461 for quantity of timber (gs) 379 f1 5136 001090 tools screw cutting metric special sets and parts set c 5 nos as per annexure a (gs) 380 f1 5110 000201 spokes shaves 75mm 734 nos ind/gs/1213(d) (gs) 381 f1 5110 000374 file cleaner card 37.5mm 432 nos cqa (gs)us /87 (gs) 382 f1 5120 000662 vices bench 100 mm 107 nos is:2586 86 (2nd revision) (gs) 383 f1 5120 001354 nail pullers 592 nos jss: 5120 14 2014 (rev 2) (gs) 384 f1 5120 001852 spanner ojde ba spear head type sets 867 set ind/gs/1755 (gs) 385 f1 3439 000393 soldering iron non electric straight 800gms 68 nos ind/gs/158(e) (gs) 386 a4 8415 000379 helmet combat abt mk ii size 7 3/8 144 nos ind/gs/1428(d) & drg no ind/gs/2394(b) (gs) 387 f1 5110 000001 files contact point 4465 nos iss:5110 11 2016 (3rd revision) (gs) 388 f1 5210 000020 tools watchmakers gauges donzieme 225 nos cigs/t&t/235 (gs) 389 f1 5110 001149 braces bit carpenter (comprises of 11 bit) 1019 nos ind/gs/2891(j) (gs) 390 f1 5120 002134 spanner socket sets no 2 3/4in square drive american 117 set ind/gs/524 (e) (gs) 391 f1 3415 000013 machine grinding complete gear ratio 1:8 23 nos ind/gs/1306(b)&ind/gs/747(e) (gs) 392 f1 5120 001584 spanners ring bihex double end cranked american & unified 155 nos ind/gs/505(g) & cigs/gs 4/16 (b) (gs) 393 f1 5120 001179 mallet raw hide 289 nos ind/gs/1944(g) & supply schedule no cqa (gs)/ss/411 (a) (gs) 394 f1 5120 001196 screw drivers ratchet 20mm 216 nos ind/gs/765 (d) (gs) 395 f1 5120 000319 spnr socket 3/4 s/d (16x13/16 dia) 1030 nos is:7975(pt i&ii) 19918 & supply schedule no cicg/ss/12951 (a) (gs) 396 f1 5110 000414 cutter clinch farriers 229 nos ind/gs/650 (d) (gs) 397 h1(b) 6810 000055 sodium hydroxide, pure 18061 kgs is:252:2013(fourth revision) ra 218 (gs) 398 f1 5120 001478 tools pipe flaring sets 149 nos drg no.cigs/tools/67 (gs) 399 f1 5120 000751 extractors tap sts (4.7mm to 25mm) 16 nos iss:5120 31: 2016 (rev 3) (gs) 400 f1 8020 000016 brushes glue (wire briddled & compressed ferrule) 530 nos jss:8020 2 2014(rev no.3) (gs) 401 f1 5120 000098 pliers watchmakers fine r/nose 10 789 nos is:3568 90 (gs) 402 f1 5120 002054 spanner socket bi hexagon american & unified 501 nos ind/gs/1288 (c) (gs) 403 f1 5110 000282 saws cross cut 1500mm 316 nos drg no ind/gs/545 & is; 620 1985 (4th rev) & cqa (gs)/ss/461 (gs) 404 f1 5120 000037 screw drivers forked double ended large 491 nos ind/gs/1263(a) (gs) 405 f1 5210 000241 dividers spring 300mm 332 nos cqa(gs)/us/581 (gs) 406 f1 5136 000820 tools screwcutting unc set no 1 12 nos ind/gs/914(g) (gs) 407 f1 5120 000272 punches centre 100mm (fine) 3280 nos is:7177 1974&cigs/ss/256(a) (gs) 408 f1 5110 000237 nippers end cutting size 225mm 380 nos is:4378 1973 & cqa(gs/ss/474) (gs) 409 f1 5120 000698 tonges smiths flat 480mm 2243 nos is:843 1968 & cicg/ss/217 (gs) 410 f1 5120 002974#1 hammers sledge double faced 2.0 kg 481 nos is: 841 983(2nd rev) & cqa (gs)/ss/33(b) & is : 620 1985 (4th rev), ra 2005 & cqa/gs/ss/961 for qty of timber (gs) 411 f1 5110 000343 plane trying 560 mm complete (wooden body double iron 63) 1693 nos ind/gs/1162 (c) & ind/gs/411/gs (gs) 412 f1 5136 000550 tools screw cutting bsw set no.2 30 nos ind/gs/207(e) (gs) 413 f1 3439 000044 soldering iron electric 230v/125w 1082 nos is: 959 1994(ra 2004) (gs) 414 f1 5120 000056#1 scrdvrs flat blddon pattern 450mm 196 nos 844 1979(ra 1991) & cqa (gs)/ss/1486 (gs) 415 f1 5110 000566 stamp steel (for metal or wood) figure 717 set is: ind/gs/507 (h) (gs) 416 f1 5120 000268 anvil tim amiths 25 kg 14 nos ind/gs/1790 (gs) 417 f1 5110 000023 files hand second cut 250 mm 2442 nos is:1931 85&cqa(gs/ss/401) (gs) 418 f1 5133 000212 bits auger carpenter 10mm 1540 nos ind/gs/289(j) (gs) 419 f1 5110 000316 planes jack 425mm complete 749 nos ind/gs/1989 (e) & drg no ind/gs/23091(i) (gs) 420 f1 5120 001103 drifts pin brass parallel 10 x 160mm 1207 nos is:2030/989 and supply schedule no cqa (gs)/ss/471 (gs) 421 f1 5110 000407 rasp cabinet bastard cut nominal length 598 nos is 3587 76& cqa (gs)/ss8480 (a) (gs) 422 f1 5110 000972 saw tenon 350mm (length of blade) pitch 1135 nos is:5123 698 & cicg /ss/224 (gs) 423 f1 5133 000226 bits braces smith countersunk flat 16.0 1080 nos ind/gs/289(j) (gs) 424 f1 8415 000340 approns leather bag tool 120 nos ind/tc/3101(e) (t&c) 425 f1 5110 000013 files half round basterd 200mm 325 nos is:1931 85&cqa(gs/ss/401) (gs) 426 f1 5133 000299 drills twist morse taper shank 18.25 mm 47 nos is:5103 69 & is: 5099 2003 & cqags 55/507 (gs) 427 f1 5345 000036 oil stones fine (200 x 50 x 25mm) 3581 nos is: 1262 2021 (gs) 428 f1 5110 000720 chisels brick 30mm 871 nos is:5663 70 (ra 1989)& cqa (gs)/ss/475 (gs) 429 f1 5210 000043 rules steel engineers type bb 100cm 223 nos is:1481 70(ra 1993)&cqa(gs)ss/65(d) (gs) 430 f1 5120 003051 spanner tubular ended nom width across flats 46 x 50mm 1867 nos is:6835 73 (ra 2010) & cqa (gs)/ss/229 (a) (gs) 431 f1 5120 000303 handle hammer 915m 403 nos ind/gs/1085(c) & supply no cqa(gs)/ss (a) (gs) 432 f1 5120 003042 spanner open jaw fixed double ended steel 135 nos is2028 1998 (gs) 433 f1 5120 003054 spanners box tubular hexagonal double ended steel 3298 nos is:2030 989 and supply schedule no cqa (gs)/ss/471 (gs) 434 f1 3439 000386 soldering iron non eletric hatchet 280g 535 nos cicg/gs/1/7 (e) (gs) 435 f1 3439 000052 soldering iron eletric 6v 15w 116 nos is: 959 1994(ra 2004) (gs) 436 h4 8135 000102 tape paper brown gummed w 40 mm x l200m 1200 roll iss:4185 1967 (gs) 437 f1 5210 000048 rules box wood t glaziers 600mm 291 nos drg no/(e) and supp schedule no cqa(gs)/ss/411(a) (gs) 438 f1 5110 000231 shears tinmass scotch 400 mm 1519 nos drg no : cicg/tools/83(b) (gs) 439 f1 5110 000258 chisel firmer 20mm (complete fitted with handled) 430 nos is:1930 1995 & cqa (gs)/ss/474 (gs) 440 f1 5120 002045 spanners socket bihex american & unified 1520 nos ind/gs/524(c) & supply no cigs/gs 418 (b) (gs) 441 f1 5136 001068 tools screw cutting metric international 65 nos ind/gs/207(e) (gs) 442 f1 5120 001142 hammer smith 1360gms 1056 nos ind/gs/1720(c) , ind (gs)1085 (c) & is:620 1985 (4th rev) (ra 2005) (gs) 443 f1 5120 000658 vices revolving head 100mm 67 nos cicg/gs 1/41 (a) (gs) 444 f1 5133 000228 bits braces carpenters countersunk rose 1223 nos ind/gs/289(j) (gs) 445 f1 5120 002955 hammer engineers ball pein 1000g 458 nos is:841 1983 (2nd rev) ra 1999 (gs) 446 f1 5140 000077 chest tool kit 42x22x18 cm 3160 nos ind/gs/1713 (gs) 447 f1 5110 000284 saw cross cut cases 79 nos ind/gs/484 (b) & drg no ind/gs/1440 (c) (gs) 448 f1 5110 000263 chisel firmer strong 6mm (complete fitt) 1032 nos is : 1930 1995 & cqa (gs)/ss/474/gs (gs) 449 f1 5210 000253 square engr steel 150mm grade 776 nos is:2103 72&cigs/ss/255 (a) (gs) 450 f1 5120 002220 spanner socket bihex american & unified 1272 nos ind/gs/524(e) (gs) 451 f1 5110 000317 planes jack iron 56 mm single cut 689 nos ind/gs/1989 (e) & drg no ind/gs/2309 (f) (gs) 452 f1 5110 000280 saws compass 475mm 390 nos is:5110 30:2019 (3rd revision) (gs) 453 f1 5133 000294 drill ; twist morse taper shank 16.50mm 95 nos is:5103 69 & is: 5099 2003 & cqags 55/507 (gs) 454 f1 5133 000157 drill; twist parallel shank; jobbers diam 771 nos is:5101 1991, is:5099 2003 & cqags 55/507 (gs) 455 f1 5120 003074 wren key sckt hd scr n/s 8mm 2194 nos is:3082 6582 & cigs/81/(e) (gs) 456 f1 5120 000712 tongs farriers turning 355mm 525 nos is:843 68 (gs) 457 f1 5110 000321 plane plough coplete (with 8 single iro) 2811 nos is:5110 39 2008 (rev 1) (gs) 458 f1 5136 001191 wrenches tape adjustable 28 nos ind/gs/739(g) (gs) 459 f1 5120 000378 tools watchmakers tweezers 105mm nippin 242 nos cots item best trade supply 460 f1 5120 000261 anvils black smith single beak 12 kg 126 nos is:570 19808/cicg/ss/300 (gs) 461 f1 5110 000041 files square bastard 350mm 167 nos is:1931 85&cqa(gs/ss/401) (gs) 462 f1 5120 007682 screw driver set of 8 bits 965 nos ind/gs/1714 (gs) 463 f1 3424 000011 forges field light 202 nos drg no.ind/gs/1113(f) (gs) 464 f1 5110 000278 saw backed tenon 250mm(length of blade) 1062 nos is:5123 1969 & cigs/ss/224 (gs) 465 f1 5120 003009 punches round 12mm 364 nos iss: 413 1974 (ra 1994) & cqa (gs)/ss/472 (gs) 466 f1 5140 000044 bags tool no.2 502 nos ind/gs/747(a)and drg no ind/gs/75/1962(d) (gs) 467 h1(d) 8110 000148 plug drum 50mm 16610 nos is:1784:2020 jss:5330 07:2020 (gs) 468 f1 3439 000212 soldering iron electric 230v/250w 632 nos is: 959 1994(ra 2004) (gs) 469 f1 5120 000921 rakes black smiths 610 mm lengh 237 nos iss: 5120 15: 2019(3rd rev) (gs) 470 f1 5120 000304 handles hammer 762 mm 283 nos ind/gs/1085 (e) & is:620 1965(ra 2005) & cqa (gs)/ss/146 for qty of timber (gs) 471 f1 5120 000093 pliers sealing 150mm 1078 nos jss:5120:53:2016 (rev no.3) (gs) 472 f1 5120 000654 vices pin chuck type 1.27mm 3.175mm 626 nos ind/gs/1057 (c) & drg no ind/gs/2337 (b) (gs) 473 f1 6810 000917 ethyl bromide techincal 95 nos rosin standard cqa (m) 474 f1 3439 000031 soldering iron electric 230 volts 188 nos is: 959 1994(ra 2004) (gs) 475 f1 5120 000006 hammers copper 1360gms 110 nos iss: 5120 34:2003(rev no 1) (gs) 476 f1 5110 000141 reamers hand parallel 13/16 inch 59 nos ind/gs/460(i) (gs) 477 f1 3439 000209 iron sldering elect 6v/25w 1284 nos is: 959 1994(reaffirmed 2004) and annexure b&c (gs) 478 f1 5120 002136 spanners socket sets no 4 3/4 in square 46 nos ind/gs/901 © (gs) 479 f1 8020 000033 brushes flat marking 1689 nos jss:8020 09 2016 (rev 3) (gs) 480 f1 5120 003077 wrenches key socket head srcew head nomi 933 nos iss: 3082 1965 & cigs/ss/81 © (gs) 481 f1 5210 000437 indicator dail ia 65 nos iss: 520 03 2006 cqa(i) 482 f1 6680 000001 techo meter hand type 630 mm 22 nos loic 2977 (gs) 483 f1 5120 003052 spanner box tubular hexagonal double ended steel 3678 nos iss: 2030 89 & ss no cqa (gs)/ss/471 (gs) 484 f1 5120 000258 squares smit 455mm x 230mm 308 nos drg no:ind/gs/1399(b) (gs) 485 f1 5120 007763 spanner pop adjustable 250mm (capacity 15 to 41 mm) 1206 nos ind/gs/1806 (gs) 486 f1 3439 000039 solderinf iron electric 230 volts 25w 4134 nos is: 959 1994(reaffirmed 2004) and annexure b&c (gs) 487 f1 3439 000211 solderinf iron electric 230 volts 75w 730 nos is: 959 1994(reaffirmed 2004) and annexure b&c (gs) 488 f1 5110 000540 pick digging head 3 kg (chisel wide & point ends) 9444 nos is:273 1990&ss nocqa(gs)/ss/353(b) (gs) 489 f1 5120 001013 bars crow chisel & claw ends 1250x32mm 1123 nos is:704 1968,84(readffirm2005) (gs) 490 f1 5110 000048#1 files tpr saw regular second cut 150mm 720 nos is:1931 85&cqa(gs/ss/401) (gs) 491 f1 5120 000307 handles hammer 430mm 1326 nos ind/gs/1085 (c) & is:620 1965(ra 2005) & cqa (gs)/ss/146 for qty of timber (gs) 492 f1 5110 000729 chisel firmer strong 20mm 1427 nos is:1930 1995 & cqa(gs)/ss/474 (gs) 493 f1 5110 000014 files half round bastard 300mm 1911 nos is:1931 85&cqa(gs/ss/401) (gs) 494 f1 5120 001582 spanner ring bihex cut double ended cran 1468 nos ind/gs/1806(g) & cigs/gs 4/10 (b) (gs) 495 f1 5110 000796 reamers set 1/8 1/2 11 set ind/gs/185 (c) & ind/gs/460 (c) & drg no ind/gs/739 (g) (gs) 496 f1 5120 000452 pincers farriers 280mm 152 nos ind/gs/1344(a) (gs) 497 f1 5120 000448 pincers carpenter 200mm 596 nos 4095 1991 & cqa(gs)/iss/82 (a) (gs) 498 h1 8110 000028 can round with level lid 1 kg 4874 nos is:3286 1980,ra2016 with appx (a) (gs) 499 h1(d) 8110 000002 drums metal galvanised iron sheet with 50mm screw 3034 nos is:ind/gs//1178(b), is: 2552 1989 (third rev) grate a 1 amdt no.1 (latest) (gs) 500 f1 5120 000155 strippers wire no 1 1193 nos is: 5087 1969 & cicg/ss/213 (gs) 501 f1 5110 000457 handles files 140mm 3660 nos is:2895 1990 & ss no cqa(gs)/ss/242 (a) (gs) 502 f1 5110 000029 files knife bastard 150mm 1082 nos is:1931 85,cqa(gs/ss/40) (gs) 503 f1 5110 000757 handles files no 1 4934 nos is:2895 1990 & ss no cqa(gs)/ss/242 (a) (gs) 504 f1 5120 000455 pincers uphosters 200mm 299 nos cicg/gs 1/6 (b) (gs) 505 f1 5110 000454#1 handle file 90mm 3314 nos is:2895 1990 & ss no cqa(gs)/ss/242 (a) (gs) 506 f1 5120 003075 wrenches key socket head srcew head nomi 6007 nos is: 3082 1965 & cigs/ss/81/ (a) (gs) 507 f1 5110 000706 tools sets rivetting no 10 837 nos ind/gs/427 (e) (gs) 508 f1 7920 000007 brushes dusting watchmakers soft 1594 nos iss: 7920 03 2019(rev 3) (gs) 509 f6 8120 000001 cyl gas acetylene empty 2832 lt 41 nos iss:7312 for cyl & is 3224 cqa (ee) 510 f6 cora 0086 ground rod msi, 1 750 17 nos na cqa (ee) 511 f1 3439 000387 soldering iron non electric hatchet 800 263 nos uis no.cicg/gs/1/7 (e) (gs) 512 f1 5120 002180 spnr ojde a&u tapped a/f size 737 nos ind/gs/1685(c) & ss to torque kst no cigs/gs 4/11 (a) (gs) 513 f1 5120 000246 tool moulder cleaners english 6 mm 579 nos cicg/t&i/229 (gs) 514 f1 5136 000866 tools screwcutting unc set no 0 19 nos ind/gs/2054(c) (gs) 515 f1 9510 000259 steel, mild, bright round 10mm 1514 nos is:9550 01 to is: 15.70 pt cqa (m) 516 f1 5110 000024 files hand second cut 350 mm 374 nos is:1931 85,cqa(gs/ss/40) (gs) 517 f1 5120 001798#1 spnr sckt bar extn 3/4 s/d 8 284 nos is: 7991 1991 & cigs/ss/296 (a) (gs) 518 h1(b) 6850 000013 ointment, prophylantic , industrial 312 nos na 519 g1 5310 001263 washers plain copper 11.0mm 23 nos is:2016: 1991 (gs) 520 f1 5110 000399 cutter wire 175mm (length p2 plier type) 380 nos iss: 5110 49 (gs) 521 f1 5120 000202 callipers micrometer inside 50mm to 300 55 nos na 522 f1 5120 003043 spanner ring cracked double ended steel 10667 nos 2029 98 & cqa (gs)/ss/232 (c) 523 h4 ihd 0465 laminating film rolls for identity cards 25 nos na (gs) 524 f1 5210 000184 gauges metal sheet and hoop 0 26bg 96 nos drg no cigs/tools/27 (b) (gs) 525 f6 digicora/mw 15/9894/22 measuring bucket 13 ltrs 24 nos na cqa (ee) 526 f1 5110 000388 cutters pipe complete (12 to 50mm) three 74 nos is:6837 1973 reffirmed 1991 & ss no cqa/ss/444 (gs) 527 h1 8110 000025 drum metal mild steel ungalvanised 25 li 1063 nos is:2552 1989 (third rev) (gs b 1) ra 2001, amd 1 & ind/gs/1179 (a) (gs) 528 f1 5120 000052 screw drivers instrument mechanics set 105mm 863 nos jss:5120:11:2014 (rev no.4) (gs) 529 f1 5120 003048 spanner ring cracked double ended steel 753 nos is:2029 98 & cqa (gs)/ss/232/(c) (gs) 530 f1 5120 000561 wrenches torque 0 800nm 140 nos igs/gs 1/8(a) & cigs/tools/98© (gs) 531 h4 8115 000015 cas wd pak stl 3(b) cl c 600x300x300mm 5032 nos is:1503 1988 reaffirmed 2017 & ss no cqa(gs)/ ss/1121(c) (gs) 532 h4 8115 000035 cas wd pak stl 3(b) cl c 375x375x150mm 832 nos is:1503 1998 (gs) 533 f1 5220 000062 plates surface 1000mmx630mm 6 nos is:2285 1991 & cigs/ss/369 (a) (gs) 534 f1 5120 000553 wrenches pipe stillson type 900mm 52 nos is: 4003(pt i) 1978 & cqa (gs)/ss/60(d) (gs) 535 f1 5120 000168 block swage stand 340mm 70 nos is: 845 1974 & cicg/ss/285 (gs) 536 f1 5110 000008 files flat second cut 250mm 3943 nos is:1931 85&cqa(gs/ss/401) (gs) 537 h3 5510 000353 timber soft wood (coniferous) sleepers grade i 299 cubic mtrs is:190 1991 (gs) 538 h3 5510 000361 timber soft wood (coniferous) sleepers grade ii 490 cubic mtrs is:190 1991 (gs) 539 h3 5510 000369 timber hardwood (non coniferous) sleepers grade i 328 cubic mtrs is:1326 1992 (gs) 540 f1 5136 001091 tools screw cutting metric specal sets 116 nos ind/gs/207 (gs) 541 f1 5120 000051 screw drivers instrument mechanics set of 95mm 888 nos 5120 11:2014 (rev no 4) (gs) 542 f1 5110 000406 rasp cabinet second cut 250mm 800 nos 3587 76 & cqa (gs)ss/480 (gs) 543 h4 8115 000018 cas wd pak stl 3(b) cl b 600x600x300m 513 nos is:1503 1988 reffirmed 2017 (gs) 544 f1 5110 000040 files square bastard 250mm 1903 nos is:1931 85&cqa(gs/ss/401) (gs) 545 f1 5110 001154 cases saw hand 650mm 151 nos drg no.cigs/tools/51(b) (gs) 546 a4 8465 000123 haversack medical universal 142 nos is:989 82&ss no.cigs/ss/139(e) (gs) 547 f3 3920 000092 mach plastic strapping set 12mm 207 nos set cqa/gs/143 (gs) 548 f1 5220 000061 plates surface 400mmx250mm 27 nos is:2285 91 & cigs/ss/369 (a) (gs) 549 f1 5120 001980 spanner box long shank ba no 6 2098 nos ind/gs/901(c) (gs) 550 h4 8115 000026 cas wd pak stl 3 (b) cl b 1200x600x600 479 nos is:1503 1998 reaffirmed 2017 (gs) 551 h1(b) 6810 000001 trichloroethylene, technical 574 nos is: 245 cqa (m) 552 g1 5315 000649 nails steel lath cut 1.6mmx4.8mmx1 508 nos is: 6730 72 (gs) 553 h4 8115 000012 cas wd pak stl 3 (b) cl c450x300x300mm 3029 nos is:1503 1988 reaffirmed 2017 & ss no cqa(gs)/ ss/1121(c) (gs) 554 f1 5120 001691 spanner socket bihex american & unified 1045 nos ind/gs/524(e) (gs) 555 f1 5345 000037 stones corborundum course & fine 200mmx50mmx25mm 508 nos (i revision) ra2014 or latest and ss no cigs/ss/261 (a) (gs) 556 f1 4930 000018 can oil lubricating 250mi rigid spount 2571 nos is:4561(part v)1968typea reaffirmed2013 (gs) 557 f1 5110 001152 drill stock hand 2538 nos ind/gs/843 (d) is: 620 1985 (4th rev) (ra 2005) & cqa(gs)/ss/461 (gs) 558 f1 5120 001739 spanner socket bihexagon metric 1/2 in s 766 nos is: 7381 1986 (ra 2003) & is:6131 1980 & cqa (gs)/ss/239 (gs) 559 h5 1080 000053 net camouflage 16.0x11.0mtr 1494 nos ind/tc/2066(g) (t&c) 560 j1 5120 003630 shovel hand & handle 3926 nos jss:5120:21:2016 (rev no.3) (gs) 561 j1 8340 000486 pin iron for tent 152 mm 79121 nos ind/gs/526 (f) (gs)...

Uttar Pradesh Small Industries Corporation Limited - Uttar Pradesh

39100611 tender for construction of retro reflective smriti dwar at 04 d / f places distt etah.; 1 supply & fixing and erectionof build up overhead structure 12.00 15m span comprising of two vertical post of 6.00m height made up of 300mm nb heavy class ms pipe as vertical member welded with 10mm ms plate at top @12 ms plate at bottom the horizonatal truss shall comprise of 40mm dia heavy class ms pipe and 40mm dia heavyms pipe amd 40mm dia heavy ms pipe as bracing and 10mm ms plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coast of synthetic enamel paint. the work includes construction of r rcc foundation of size 0.90x0.90m of required depth as per site condition of built up structure including earth work in excavation 100mm thick lean concrete in 1:4:8 ( cement, coarse sand and 40mm gauge stone ballast ) rcc with and 1:2:4 ( cement, coarsre sand and 20mm stone grit ) including supply and fixing of 25min dia foundation bolts 600mm long as per provision of structure design including cost of rainforcement and shuttring. the lateral vertical clearances and complete. installation work shall be as per releventclauses of motrh specificationsaction 800 and irc 672010 complete in all respect. the rates shall include cost of design. fabrication, supply transporations.local shifiting cost of design fabrication, supply transporations.local shifting erection of signage structure using crane, inclusive of all taxes royalty vat etc.all t&p machine, material and labour required for proper completion of work as per direction of engineer in charge. 2 providing and fixing of retro reflective sign board of 2.0mm thick almunium composite panel ( acp ) sheet face to be fully coverd with micrpoprismatic full cube technology xi grade retro reflective sheeting in required colour fully processed on pressure senstive adhesive or equivalent procesed with text matter and border of the same sheeting cutting by computerized cutting machine and processed with base of aluminum sheet, back of base sheet and back frame shall be paintedwith synthetic enamel complete board as per irc:67 with vertical and lateral given in para 802.2 & 802.3 clause 801.3 morth. complete ( 1x2x12.40x1.50=37.20 sqm. ) 3 less 1 % labour cess...

Uttar Pradesh Cooperative Sugar Factories Federation Limited - Uttar Pradesh

39014009 for supply and erection of lagging and aluminimum cladding to our 22 co operative sugar factories(except ramala and sathiaon) in uttar pradesh , thermal insulation by providing light raising bonded slap ( lrb slap) density 100 kgs/m3 & aluminium sheet. 22 swg ( 0 56 mm) g.i. wire, 20 swg fixing of g.i.screw pan head 8 x 13 mm by grooving all joint with necessary overlap etc.job involvethe work of cleaning of surface area if required for insulation different station /equipment with material rates as per isi norms , thickness of lrb slap 25 mm/sqmtr , thickness of lrb slap 40 mm /sqmtr , thickness of lrb slap 50 mm/sqmtr , thickness of lrb slap 75 mm/sqmtr...

North Eastern Railways - Uttar Pradesh

38919986 auction sale of disposable scrap consisting of aluminium window frame, door assembly, aluminium moulding, channel, strips, small cut pcs of aluminium sheets, chequred plate, slab, jack, pressore pump, etc. in different sorts of sizes and other aluminium products, known or unknown, ently damaged, with or without ms or rubber, can also be found in this scrap.remarks; cutting is permitted to remove the ms or rubber attachment.location: near the ic gate, in front of the rpf postlbpl, dbaw, gst 18%, tcs 1% , hsn code 760200, allocation 20714208...

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

38885919 complete overhauling of pressure parts of boiler, supply of scaffolding, jet cleaning of first and second pass of boiler, works of main boiler system, soot blower, drum internal, penthouse, repairing of seal plate of seal trough, repairing of buck stay, repairing / refixing / servicing of hangers and its supports, insulation, radiography test & other associated works required during oh#3, 2x210mw, btps, parichha, jhansi”. time duration: 30 days fy 2023 24 1 complete external water washing of all floors of boilerfrom 8 meter toroof of pent house and internal cleaning ofsecond pass including dust / ash disposal from pent house, dog house andeconomizer hopper. 2 supply and erection of cup lock in ist and 2nd pass scaffolding. total duration 30 days 3 high pressure jet cleaning for pressure part with supply of pump. 4 high pressure joints of carbon steel / low alloy t 11 / t 22 / t91 / tph 347 hp joints up to 76.1mm of tube size. 5 thickness survey ofboiler pressure part, 16 hanger economizer ( lower & upper bank ) / 16 hanger of ltsh and other area of boiler pressure part i.e. water wall, scw, crh, hrh, fsh, etc as per requirement. 6 unit rate of extra metal build up eroded portion of pressure parts tube caused by ash / steamerosion using suitable electrode matching with parent metal composition by arc and argon welding where joint is not required ( size:150mmlength x 35mmwidth, depth of erosion up to 2.5mm ) . 7 fin welding work of water wall / steam cool wall. 8 installation of ss shielding / cassette baffles in all erosion prone area like in screen water wall, ltsh, economiser and extended scw. 9 dp test of dissimilar joints of header tubes ( dp kit shall be in the scope of contractor ) . 10 repairing of skin casing of first pass & second pass of pent house and complete furnace sealing in pent house and dog house area. casting of refractory of penthouse where ever required after alignment / correction of roof sealing tubes. disposal of ash of penthouse. 11 repairing / replacement works of wind box expansion bellow and sadc of each corner. 12 overhauling of soot blower and aph blower. 13 complete overhauling of all lrsb, 1job= 6 nos. lrsb. 14 complete internal overhauling of boiler drum. 15 servicing of safety valves ( drum, super heater, hrh, crh and erv ) . 16 servicing of ms1 & ms2, economizer inlet valve, feed control valves and other various types of valves ( 250mm to 350mm size valve ) . 17 dismantling and casting of refractory work in various places inside boiler. 18 additional scaffolding / day due to delayof uprvunl end 19 repairing and reconditioning work of inspection window and man holes. 20 repairing of damaged / bulged seal plate of seal trough of boiler. 21 repairing and reconditioning of horizontal buck stay of ist and 2ndpass by cutting / dismantling / welding of buck stay link and resetting of horizontal buck stay link with buck stays. 22 repairing and reconditioning of vertical buck stay of first and second pass by cutting / dismantling / welding of buck stay link and resetting of vertical buck stay link with buck stays. 23 servicing / replacement / resetting of spring hangers, supports, anchor and restraints of critical piping and ducts and resetting the spring hangers on cold set values of boiler side 24 supply and fixing of 65mm thick lrb insulation pad in single layer 25 supply and fixing of 65 mm thick lrb insulation pad in double layer 26 supply and fixing of 65 mm thick lrb insulation pad in triple layer 27 supply and fixing of g.p. sheet 22 swg ( 0.71 mm thick ) 28 removing the old webbed g.c. sheet / g.p. sheet / aluminium sheet and fixing the same on lrb pads with self tapped screws. 29 lrb pads in 50mm applying with new aluminium sheet of 24 gauge on steam / feed lines 30 radiography of new h.p joints of boiler tube by remote operated gamma radiography camera, processing of films and interpretation of h.p joints during work in boiler. ( complete work of radiography, processing & submission of report of 01 no. h.p joint =01 no job ) 31 radiography of old h.p joints of boiler tube by remote operated gamma radiography camera, processing of films and interpretation of h.p joints during work in boiler ( complete work of radiography, processing & submission of report of 01 no. h.p joint =01 no job ) ...

Indian Army - Uttar Pradesh

38665087 bids are invited for expandable store nails steel wire round 40mmx2mm , nails steel wire round 50mmx2 point 5mm , nails steel wire round 50mmx2 point 8 mm , nails steel wire round 100mmx 5mm , steel angle 100x100x12 , steel angle 25x25x5mm , steel angle 35x35x6mm , steel angle 40x40x5mm , steel angle 45x4x5x5mm , steel angle 30x30x3mm , aluminium sheet half hard 1 point 22mm total quantity : 613...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

38553577 supply of labour and supply and fixing of electrical item for balance work of residence building typ b 04 no at fire satation samthar, jhansi andi jhansi 2 first class bricks works in 1:6 cement and coarse sand of 1.25f.m. mortar in foundation upto plinth supply of all labour and t&p etc. required for proper completion of the work including providing scaffolding rope, chahlies fixing and removal. in foundation. 3 first class bricks works in 1:4 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. in super structure work. 4 fixing of m.s. angle iron door, windows, ventilator frame made of approved m.s. angle iron wroght to required form including drilling hole, welding and reciting where necessary and also including supply of all materials etc. and also including all taxes, wastage andall respect as per direction of engineer in charge for proper completion of work at site of work. 5 fixing s.s. railing stair case 6 fixing of m.s. angle iron z section window (approved section) with specified design of grill out side openable design of windowexcluding glass pans. 7 fixing of m.s. grill of approved quality and drawing made of flat iron including supply of all labour and t&p etc all respect as per direction of engineer in charge 8 first class bricks works in 1:3 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. 9 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . column 10 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . linter & sunshade 11 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. . beam 12 r.c.c. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i. binding wire and including necessary centering etc. and also including supply of alllabours and t&p etc. .slab 13 centering and shuttering including strutting, propping etc. and removal of form for all rcc work. 14 mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrougth to required shape as necessary including bending for proper completion of the work . r.c.c. work 15 filling of sand also including supply of all labour and t&p etc. required for proper completion of the work. 16 cement concrete in 1:4:8 with cement, sand and (22.40 43)mm granite stone ballast (crusher broken) in foundation including supply of all labours and t&p etc. required for proper completion of work. 17 10 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 18 first class bricks works in 1:3 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. 19 15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 20 12mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. in outside 21 10 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all labour and t&p etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25f.m. mortar. inside 22 laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring or skirting laid with 1:3 ( 1cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all labour t&p required for proper completion of work. in flooring 23 laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all labour t&p required for proper completion of work. in skiting 24 laying of 20mm thick kota stone flooring over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab complete. 25 fixing 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all labour and tools etc. required for completion of the work . (size of tiles upto 200x300 mm) in flooring 26 fixing 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all labour and tools etc. required for completion of the work . (size of tiles upto 200x300 mm) in wall 27 making grooves 10 to 12mm wide x 8mm deep in plaster on the wall or in ceiling etc. 28 making of drip couars in same shade or faces i/x supply of all materials, labour etc. 29 fixing of 35cm (1.1/4”) thick commercial quality (kanju) sitapur ply or other approved ply wood flush shutters. 30 fixing of oxidize door fitting. 31 putty two coated including all t&p etc complete. 32 wall painting with acrylic emulsion paint, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 33 weather coat two coat coats finishing walls with acrylic smooth exterior paint of required shade 13.46.1 new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 90.00 34 painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials labour and t&p etc. required for proper completion of the work. paint to be used should confirm to the isi no.103 1950 (in two coat.) wood work. 35 red oxide primer paint on iron surface 36 fixing panes of glass with equal or equivalent isi marked quality putty brads and springs and including supply of all materials and labour ete complete. (3.80 to 4.7mm thick) 37 fixing of aluminium sheet 24 gauge in door shutter with b & snew toilet 38 25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including supply of all labour and t&p etc. required for proper completion of the work. 39 25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including supply of all labour and t&p etc. required for proper completion of the work. 40 fixing of jali door shutter in teak wood 41 fixing of stainless steel masqutio proof jali window. 42 fixing of ward rob shutter 43 fixing of grenite stone flooring and nosing window sil and courter 44 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 45 filling of sinder in sukan portion of toilet 46 fixing of m.s. sheet door 47 laying “brick bat coba” 100 mm thick laid with m 150 class brick bat coba 7.50 cm thick with gap of 15mm to each other 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & including supply of all labour t&p etc. required for proper completion of work and as per direction of e.i.c. 48 fixing 110mmø pvc pipe complete with rose heads bends m.s. clamps 2.5cmx3mm fixed to walls by 15cm long 6mmø nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all labour, tools and plant etc. required for proper completion of work. 49 making khurra 50 providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. 51 casting of man hole chamber 600x600x750 52 fixing of p.v.c pipe 150 mm dia 53 supply of labour for sanitary & water supply 54 fixing of european type white glazed earthen ware w.c. pan indian approved 1st quality isi marked backlight seat cover and lit of c.p. brass hinges and rubber buffers. 55 fixing ist quality w.c. orrisa pan white glazed earthen ware isi marked wc pan size 580mm(hindustan, cera make) including supply of all materials, labour and t&p etc. required for proper completion of work. 56 fixing of wash hand basin size 550x400mm isi marked basin (hindustan, cera, parrywere make) 57 laying of stanless steel sink of size 600x450x200mm with drainges board 58 fixing of c.p. brass towel rail 600mm size together with pair of c.p. brass brackets to fit towel rail. 59 fixing of 600x400mm beveled edge mirror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixed to plastic sleeves with c.p. brass screws and washers. 60 fixing of c.p. soap dise. 61 fixing of pvc tank 1000 lits. 62 fixing of angle cock 63 fixing of 15mmø c.p. short body bib cock. 64 fixing of 100x75mm pvc nahani trap. 65 fixing of c.p.waste 32mmø 66 fixing of c.p.waste 40mmø 67 fixing of c.p. jali 100mmø 68 fixing of c.i. door tee 100mmø 69 fixing of c.i. door tee 75mmø 70 fixing of c.i. door bend 100mmø 71 fixing of c.i. door bend 75mmø 72 supply and fixing of m.s. clamp.100mmø 73 supply and fixing of m.s. clamp.75mmø 74 making lead joint 100mmø 75 making lead joint 75mmø 76 fixing of c.i.pipe isi mark c.i.pipe 100mmø 77 fixing of c.i.pipe isi mark c.i.pipe 75mmø 78 fixing of g.i.pipe 15mmø 79 fixing of g.i.pipe 20mmø 80 fixing of g.i.pipe 25mmø 81 fixing of 15mm pvc connection 45mm long. 82 fixing of gate valve.25mmø 83 fixing of gate valve. 15mmø 84 fixing of c.i. collar 100mmø 85 fixing of c.i. collar 75mmø 86 cutting of hole in r.c.c. 87 fixing of c.i. plan bend 100mmø 88 fixing of c.i. plan bend 75mmø 89 supply of labour for construction of apron drain 250mm wide 90 excavation in foundation insoil mixed with moram/kankar in bundelkhand area requiring use of specials tools and plants such as pick axes and sabbal etc. (rate ins including royality) 91 supply and filling of sand. 92 cement concrete in 1:4:8 with cement, sand and (22.40 43)mm granite stone ballast (crusher broken) in foundation including supply of alllabours and t&p etc. required for proper completion of work. 93 first class bricks works in 1:4 cement and course sand of 1.25f.m. mortar in above plinth supply of all labour and t&p etc. required for proper completion of the work. but in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. in super structure. 94 25mm cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand:4 graded stone aggregate of size 12.5mm and below) by laid over concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips. (excluding cost of glass strips.) 95 2cm. (.3/4”) thick cement plaster in on drain side & top in 1:2 consisting of one part of cement and 2 part in panels, finished with 3mm. (1/8”) floating coat of neat cement or cement and marble dust in redio of 5:1 including supply of all materials labour and t&p etc. required for proper completion of the work. 96 electric work (labour with material) 97 wring point for light with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect. 98 wring point for fan/fresh air fan with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sqmm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect. 99 wring point for plugwith 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect. 100 wring point for call bell points with 1.5 sq. mm frlsh insulated multistrend single core copper conductor cable in pvc conduit with 1.5 sq. mm fr pvc insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect. 101 supply & wiring of submains with two number 10 sq.mm pvc insulated single core copper conductor in 25mm dia heavy duty pvc conduit with 1 no. 6 sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 102 supply & wiring of submains with two number 6.0 sq.mm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 4sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 103 supply & wiring of submains with two number 2.5 sq.mm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 1.5sq.mm fr pvc insulated multistrend single core copper conductor cable as earth continulty wire drawn inside the conduit complete in all respect. 104 supply and wiring of 4 number 10 sq. mm. frlshpvc insulated 1100 v grade single core copperconductor cable in 32 mm dia heavy guage rigid steelconduit on surface, with two number 6 sq mm singlecore copper conductor cable as earth continuity wiredrawn in coudit , complete in all respect. 105 s/f of led tube light with batten suitable for up to 1 x22 watt led tube light complete including tube etc on surface complete in all respect. cat aaa 106 supply and fixing of 24 watt to 32 watt lumen above 3300 surface mounting led squre ceiling fitting having powder coated die cast aluminium housing body with extended heat sink, diffuser of polycarbonate meterial and drive set complete in all respect. cat aaa 107 s/laying of al conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size of as directed by the engineer incharge, complete in all respect. the armouring of the cable ahsll be properly connected with the earth conductor by clamps etc.35 sq.mm 3.5 core. 108 supply & erection of factory fabricated and wired metal cald dust and vermin proof floor mounting m. s. channel base with bottom and top cable entreis electrical controlpanel with tpn mccb (fore pole 36 ka with thermal maganatic release) switches complete and instrument chamberetc. complete in all respects. the instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameter (kva,p.f,kw etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. the panel board shall have suitable capacity electrolyticaluminium busbars as per is8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as cmc/dmc support with deteachable side covers and shall be suitable for extension on the sides. the mccbs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.the job includes the grounting of the board as per direction of engineer in charge. all out goings of 100 amp. and above will be provided shall be fabricated with crca sheet with a minimum thickness of 1.6 mm/2 mm. cubicle type switch board shall be of cat a & b only.incoming : 100 ampmccb 01 no.outgoing : 63 amp mccb 03 no. 109 s&l of 25mm x 3mm g.i. strip from earth electrode directly in the ground as requird complete in all respect. 110 supply & burying of earthing electrode t 19 (hot dip galvanized), length 300mm, outer pipe 50mm, inner pipe 25, terminal dia 12mm, outer gi pipe of 16 swg and inner gi pipe of 12 swg with hot dip galvanization up to 100 micron filled with crystllingnce conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm squre c.i. frame with hinged cove & masonty housing. (from electrode terminal to switch board, cost of 25x3 g.i. strip will be extra) make: as approved in u.p.p.w.d., & c.p.r.i. certified. 111 s/f of 6amp. to 32 amp. spmcb (10 ka) cat a 112 s&f of 63 amp dp mcb cat b 113 s&f of 40 amp sp mcb cat b 114 s&f of 50 amp to 63 amp sp mcb cat b 115 s&f of 63amp 4 pole mcb (10 ka) cat b 116 s&f surface/flush mounting 4 waysv tpn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat a 117 s&f surface/flush mounting 8 ways spn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat a 118 s&f surface/flush mounting 4 ways spn distribution board without mcb complete in all respect, as directed at site byengineer in charge. cat a 119 erection and testing ofcelling fan and regulator etc. excluding supply of down rad, complete in all respect. 120 s/f of hexagonal fan box with hexagonal side of approx 80mm in legnth fabricated from 16 swg ms sheet incorporating 10 mm dia, ms round bar as per approved complete in all respect. 121 s/f of electronic fan regulator (modular) 120 280 v isi marked on the existing switch board including making connection, required material, labour t&p etc. complete in all respect. 122 s/f of power plug with 20 amp/250 volt flush type modular switch and 5 pin 20 a/250 volt flush type universal modular socket switch on concealed m.s. box including supply of all material, labour t&p etc. required for proper completion of work. 123 supply & wiring of submains with two number 1.5 sqmm pvc insulated single core copper conductor in 20mm dia heavy duty pvc conduit with 1 no. 1.5sqmm fr pvc insulated multistrend single core drawn inside the conduit complete in all respect. 124 s/f of 16 gauge m.s drum duly painted includidng making hole in the wall for exhaust fan and finishing properly complete in all respect with luvers dully painted. 125 supply and fixing of led street light fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 watt. confirming to ip 66 andabove protection complete in all respect. 126 s/f fan sheet cover of backelite sheet 127 s/f of ceiling fan 1200 mm 5 star rated : bajaj/havells/ usha/ crompton. 128 s/f ofled bulb 9 watt 129 s/f of light duty exhaust fan 12 dia 130 s/f ofexhaust fan lours 12 dia 131 supply and fixing of fire extinguisher, abc type 6.00kg. capacity (isi marked is : 15683 & tac approved)complete with initial charge and wall bracket, along withsupply of all materials and labour for proper completionof work. 132 supply and fixing of c02 type fire extinguisher 4.5 kg.capacity (isi marked is : 2878 & tac approved)complete with initial charge and wall bracket, along withsupply of all materials and labour for proper completionof work. 133 s/f ofcall bell ...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

38553571 supply of material for balance work of residence building type b 04 no at fire station samthar jhansi 2 supply of m.s. angle iron door, windows, ventilator frame made of approved m.s. angle iron wroght to required form including drilling hole, welding and reciting where necessary and also including supply of all materials, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of engineer in charge for proper completion of work at site of work. 3 supplys.s. railing stair case 4 providing of m.s. angle iron z section window ( approved section ) with specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c / cand 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans. 5 supply of m.s. grill of approved quality and drawing made of flat iron including supply of all materials, labour and t&p etc also including one coat of red oxide paint comp. in all respect as per direction of engineer in charge ( s.i. no. new item 3 ) 6 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrougth to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping and hooks. r.c.c. work 7 supply of sand also including supply of all materials, etc. required for proper completion of the work. 8 providing of 8 to 10mm thick ivory or light shade vitrified tiles of 600mmx600mm size in flooring or skirting laid with 1:3 ( 1cement : 3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete i / c supply of all materials, required for proper completion of work. in flooring 9 providing of 20mm thick kota stone flooring over 20mm thick base of cement mortar 1:4 ( 1cement: 4 coarse sand ) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab . 10 supply 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materialsetc. required for completion of the work . ( size of tiles upto 200x300 mm ) in flooring 11 supply 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materialsetc. required for completion of the work . ( size of tiles upto 200x300 mm ) in wall 12 supply of 32cm ( 1.1 / 4” ) thick commercial quality ( kanju ) sitapur ply or other approved ply wood flush shutters. 13 putty two coated including all material etc complete. 14 wall painting with acrylic emulsion paint, having voc ( volatile organic compound ) content less than 50 grams / litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 15 weather coat two coat coats finishing walls with acrylic smooth exterior paint of required shade 13.46.1 new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) sqm 90.00 16 painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint or clear synthetic varnish including supply of all materials labour and t&p etc. required for proper completion of the work. paint to be used should confirm to the isi no.103 1950 ( in two coat. ) wood work. 17 red oxide primer paint on iron surface 18 providing panes of glass with equal or equivalent isi marked quality putty brads and springs and including supply of all materials and labour ete complete. ( 3.80 to 4.7mm thick ) 19 supply of aluminium sheet 24 gauge in door shutter with b & snew toilet 20 supply of jali door shutter in teak wood 21 supply of stainless steel masqutio proof jali window. 22 supply of ward rob shutter 23 supply of grenite stone flooring and nosing window sil and courter 24 supply of sinder in sukan portion of toilet 25 supply of m.s. sheet door 26 supply 110mmø pvc pipe complete with rose heads bends m.s. clamps 2.5cmx3mm fixed to walls by 15cm long 6mmø nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all material labour, tools and plant etc. required for proper completion of work. 27 supply of p.v.c pipe 150 mm dia 28 sanitary & water supply 29 supply of european type white glazed earthen ware w.c. pan indian approved 1st quality isi marked backlight seat cover and lit of c.p. brass hinges and rubber buffers. 30 providing ist quality w.c. orrisa pan white glazed earthen ware isi marked wc pan size 580mm ( hindustan, cera make ) including supply of all materials, labour and t&p etc. required for proper completion of work. 31 supply of wash hand basin size 550x400mm isi marked basin ( hindustan, cera, parrywere make ) 32 supply of stanless steel sink of size 600x450x200mm with drainges board 33 supply of c.p. brass towel rail 600mm size together with pair of c.p. brass brackets to fit towel rail. 34 supply of 600x400mm beveled edge mirror of superior glass mounted on 6mm thick a.c. sheet or plywood sheet and fixed to plastic sleeves with c.p. brass screws and washers. 35 supply of c.p. soap dise. 36 supply of pvc tank 1000 lits. 37 supply of angle cock 38 supply of 15mmø c.p. short body bib cock. 39 supply of 100x75mm pvc nahani trap. 40 supply of c.p.waste 32mmø 41 supply of c.p.waste 40mmø 42 supplyof c.p. jali 100mmø 43 supply of c.i. door tee 100mmø 44 supply of c.i. door tee 75mmø 45 supply of c.i. door bend 100mmø 46 supply of c.i. door bend 75mmø 47 supply of m.s. clamp. 100mmø 48 supply of m.s. clamp. 75mmø 49 providing of c.i.pipe isi mark c.i.pipe 100mmø 50 providing of c.i.pipe isi mark c.i.pipe 75mmø 51 supply of g.i.pipe 15mmø 52 supply of g.i.pipe 20mmø 53 supply of g.i.pipe 25mmø 54 supply of 15mm pvc connection 45mm long. 55 supply of gate valve. 25mmø 56 supply of gate valve. 15mmø 57 supply of c.i. collar 100mmø 58 supply of c.i. collar 75mmø 59 supply of c.i. plan bend 100mmø 60 supply of c.i. plan bend 75mmø 61 supply of material. 62 supply of cement pcc 50kg / bag ( mycem / j.k. / acc / ultratech 63 supply of course sand fm 1.25 2.32 above stacking as per directed engineer in charge. 64 supply of 20 mm stone grit stacking as per directed engineer in charge 65 supply of 40 mm stone ballast stacking as per directed engineer in charge 66 supply of brick m 150 i / c loading unloading stacking as per directed engineer in charge...

Kisan Sahkari Chini Mills Limited - Uttar Pradesh

38538238 tender for lagging work on various equipments 1 thermal insulation by providing light raising bonded slab lrb slab density 1000 cubic kg with aluminium sheet 24 swg, gi wire 20 swg fixing of gi screw 8 x 13 mm by groving all joint with necessary overlap etc job involve the work of cleaning of surface area if required for insulation different station or equipment with material rates as per isi normslrb thickness 50 mm 2 thermal insulation by providing light raising bonded slab lrb slab density 1000 cubic kg with aluminium sheet 24 swg, gi wire 20 swg fixing of gi screw 8 x 13 mm by groving all joint with necessary overlap etc job involve the work of cleaning of surface area if required for insulation different station or equipment with material rates as per isi normslrb thickness 75 mm 3 thermal insulation by providing light raising bonded slab lrb slab density 1000 cubic kg with aluminium sheet 24 swg, gi wire 20 swg fixing of gi screw 8 x 13 mm by groving all joint with necessary overlap etc job involve the work of cleaning of surface area if required for insulation different station or equipment with material rates as per isi normslrb thickness 100 mm...

Purvanchal Vidyut Vitaran Nigam Limited - Uttar Pradesh

38537631 providing jan suvidha facility at different sub stations / billing centers of edc distt ghazipur under varanasi distribution zone 1 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5 meter ( 5ft ) and lead upto 30 meter ( 100 ft. ) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters ( 100ft. ) from the foundation trenches. 2 concrete with 4cm gauge brick ballast, coarse sandand cement in proportion of 12:6:1 in foundation & under floors including supply of all materials, labour & t&p etc. complete. 3 1st class brick ( class 150 ) work in 1:6 cement and coarse sand ( f.m. 1.5.to 2.0 ) . mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. 4 same as in item no. 3 above b.w. in 1:6 in super structures but for wall one brick ( 230mm ) thick 5 same as in item no. 3 above but b.w. in 1:4 in super structures but for wall up brick ( 115mm ) thick 6 first class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0m depthincluding cutting moulding bricks as required including cost ofall materials labour and t&p complete. 7 s / filling brick bats including supply of material labour t&p etc. complete ( based on materials rates +10% contracor profit ) . 8 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work 9 r.c.c. work with cement, approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. ( binding wire to be supplied by the contractor free of cost ) . 10 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p 11 mild steel or iron in plain work such as reinforced concrete or reinforced brick work. ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend hooks, and authorized overlapping shall be measured. 12 mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work. 13 s / f 8mm thick white glazed somany, johnson etc 1st quality tilesin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 14 s / f 6 mm thick white glazed tilesin skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 15 12 mm ( 1 / 2 ) thick plaster with cement mortar in proportion of 1:6 cement and approved coarse sand over brick work, minimum thickness not to be less than 1 cm. ( 3 / 8 ) including supply of all materials, labour and t&p etc. required for proper completion of the work. ( rates including cost of cement ) 16 same as item no 15 above but in proportion 1:4 cement & coarse sand. 17 same as item no 15 above but in proportion 1:3 cement & coarse sand. 18 add for extra labour and matarials for plaster over rough face of one brick wall. 19 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including cost of all materials, labours and t&ps etc. required for proper completion of the work. 20 providing / making drip course ( 25x12 ) mm in 1:2 cement & coarse sand mortar to a rectangular profession 25mm wide and 12mm thick to a out side of sunsheds and projected slab pattas etc. including cost of all materials, labours and t&p s etc. required for proper completion of work. ( including cost of cement ) . 21 earth filling under floors and in substation area including cost of earth. earth to be obtained from outside the corporations area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete including cost of earth with all lead and lift etc. complete. 22 local river sand filling in plinth including supply of necessary quantity of sand from a distances not exceeding 8 kms. ( 5 miles ) from the site of work including watering ramming and dressing etc. rate include cost of all materials, labour and t & p etc. required for proper completion of the work. 23 40 mm. thick c.c. 1:2:4 plain cement concrete with cement, approved coarse sand, and 2cm. ( 3 / 4 ) graded approved stone ballast laid in pannels finished with 3mm. ( 1 / 8 ) floating coat of neat cement and marble dust in ratio of 5:1 as specified over ( without base concrete ) and removing any over lapping mortar at the joints of the pannels, if any, and giving them a uniform finish including supply of all materials labour and t&p etc. required for proper completion of the work without base concrete. 24 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. 25 white washing three coat including supply of all materials, labour and t&p etc. required for proper complection of the work. 26 painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work. 27 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. 28 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p. 29 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered and welded with 100x14x3.15 mm holdfast embedded in cement concrete block15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand and 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should confirm to i.s.1038 1975. ( aluminum beading with rubber packing included ) . 30 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. 31 supply and fixing support clamps for column pipesmade out of ms flats, pairs of bolt nuts etc complete with all material, labour, t&p. 32 supply and installation of india mark ll hand pump including 150 mm dia. 70 m deep boring up to second strata including supply and lowering 110mm to 63mm dia pvc pipe ( 24 metre 110mm & 09metre 63mm dia 6kg / sqm ) with required strainer, reducer joining 90mm dia long cylinder, 32mm dia gi pipe in 3 metre long piece including supply and filling of course sand of approved quality ( approx 0.15 cum ) including developing the bore well to achiveclear and sand free water for continious 60 min. including cost of all material. labour and t&p and its cartage for installation of hand pump complete as per drawing and design and instruction of e / c and making 1.85 metre dia chabutara with excavation of earth and laying 25 mm c.c.floor1:2:4 with cement, c. sand and 20 mm stone ballast, with water proofing compound over 100 mm thik c.c. 1:6:12 with cement , c. sandand 40mm brick ballast and making side edge 115mm thick and 300 mm deep with brick 1:4 and plaster the same with 1:4 mix with neat cement finish also including 115mm wide drain 1:4 brick work & plaster all around the periphery of plateform complete including supply of all materials, labour and t&p etc. required for proper completion of work. rate as per se, 7th mandal, up jal nigam, gorakhpur letter no 1045 dt 16.02.15 33 wiring point for light with 1.5 sq. mm. pvc insulated single core copper conductor cable in heavy guage rigid pvc conduit pipe concealed in the wall, complete with 1.5 sq mm multistand copper earth continuity wire with piano type switch & ceiling rose / angle / batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as. 34 same as above item no.33 but wiring for fan point. 35 same as above item no.33 but wiring for plug point. 36 s / f angle / batten holder. 37 s / f of power plug with 15a / 250 volt flush type switch and 5 pin 15a / 250v flush type universal socket in suitable m.s. box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 38 supply and fixing of switch box 150x150x65mm size of approved make made up of 1.00mm thick isi marked g.p. sheet all 4 corners folded & spot welded for screw and holes plugged with pvc nylon caps. two or more holes for pipe entry of 25.4mm on upper and lower sides of the box.holes should be semi shutterd type and fitted with heavy brss earth piller duly screwed & brand name should be embossed.box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s / o all materials, labour and t&p required for proper complection of work as directed at site by e / i charge. 39 s / wiring sub main with 2 no. 2.5sq mm pvc insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage pvc condut concealed with wall including one number 1.5 sqmm fr pvc insulated multistand copper cable as earth contuity wire drawn in conduit. 40 supply and fixing of led tube light with batten suitable for up to 1x22 watt led light fitting including tube on surface complete in all respect. 41 supply and fixing of 63a 240 volts i.c. cut out of approved make on the metre board or polished mdfeg / teak ply board. complete in all respect. 42 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. 43 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work. 44 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. 45 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 46 supply and fixing of 32mm diag.i. ( b class ) column pipes jtc / jindal make with column coupling socket as required for proper completion of workincluding all labour material & t&p. 47 providing & fixing half turn 15mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.05 ) 48 supply and installation of 32 mm dia outlet size submersible pump set 1.00 h.p.89 / 45 operating head, single phase, ksb or other approved isi marked, standard equivalent make complete with all material, labour, t&p. 49 s / f single phase control panel board for single phase submersible pump sets of 1.00hp ksb / best or other approved make containg rotary on / off switch for mains, the ammeter, volt meter & starter with selector etc. complete in all respect. 50 s / f of 1.5 sq. mm 3 core p.v.c. sheathed p.v.c. insulated water proof isi marked, flat flexible copper cable of best or other equivalent make, for 1hp and up to 3hp submersible pump sets, complete in all respect. 51 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 52 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 53 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 54 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 55 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories ( low level ) including all materials, labour and t&p etc complete. 56 supply and fixing nahani trap india make of heavy approved quality complete with c.p. brass grating, nahani trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and t&p etc. required for proper completion of the work. 57 providing and fixing in position 32 mm. dia p.v.c. waste pipe for wash basin. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 58 supply and fixing of angle valve including all materials, labour and t&p etc. required for proper completion of work as directed by e / i. 59 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mmx140mm hindustan make or other equivalent approved make of ist quality with 100mm dia. white glazed p or s trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour. 60 providing and fixing cp brass piller cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 61 providing and fixing pvc connection pipe, 450x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 62 providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality ( hindutan, neycer make ) i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 63 providing and fixing division plate 600x300 mm white glazed for urinals i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 64 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 65 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work. 66 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. 67 supply and fixing of 5 blade exhaust fan ventile air dx 225 mm of havellsor equivalent make including all material, t&p etc required for proper completion of work as approved by engineer in charge. 68 supply and installation of 0.5 hp kirloskar or equivalent makehorizontal, self priming, single phase , monoblock tullu pump including cost of labour, t&p and material required for completion of work. 69 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.17 ) ...

Purvanchal Vidyut Vitaran Nigam Limited - Uttar Pradesh

38536901 providing jan suvidha facility at different sub stations / billing centers of distt chandauli under varanasi distribution zone 1 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5 meter ( 5ft ) and lead upto 30 meter ( 100 ft. ) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters ( 100ft. ) from the foundation trenches. 2 concrete with 4cm gauge brick ballast, coarse sandand cement in proportion of 12:6:1 in foundation & under floors including supply of all materials, labour & t&p etc. complete. 3 1st class brick ( class 150 ) work in 1:6 cement and coarse sand ( f.m. 1.5.to 2.0 ) . mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. 4 same as in item no. 3 above b.w. in 1:6 in super structures but for wall one brick ( 230mm ) thick 5 same as in item no. 3 above but b.w. in 1:4 in super structures but for wall up brick ( 115mm ) thick 6 first class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0m depthincluding cutting moulding bricks as required including cost ofall materials labour and t&p complete. 7 s / filling brick bats including supply of material labour t&p etc. complete ( based on materials rates +10% contracor profit ) . 8 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work 9 r.c.c. work with cement, approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. ( binding wire to be supplied by the contractor free of cost ) . 10 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p 11 mild steel or iron in plain work such as reinforced concrete or reinforced brick work. ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend hooks, and authorized overlapping shall be measured. 12 mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work. 13 s / f 8mm thick white glazed somany, johnson etc 1st quality tilesin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 14 s / f 6 mm thick white glazed tilesin skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 15 12 mm ( 1 / 2 ) thick plaster with cement mortar in proportion of 1:6 cement and approved coarse sand over brick work, minimum thickness not to be less than 1 cm. ( 3 / 8 ) including supply of all materials, labour and t&p etc. required for proper completion of the work. ( rates including cost of cement ) 16 same as item no 15 above but in proportion 1:4 cement & coarse sand. 17 same as item no 15 above but in proportion 1:3 cement & coarse sand. 18 add for extra labour and matarials for plaster over rough face of one brick wall. 19 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including cost of all materials, labours and t&ps etc. required for proper completion of the work. 20 providing / making drip course ( 25x12 ) mm in 1:2 cement & coarse sand mortar to a rectangular profession 25mm wide and 12mm thick to a out side of sunsheds and projected slab pattas etc. including cost of all materials, labours and t&p s etc. required for proper completion of work. ( including cost of cement ) . 21 earth filling under floors and in substation area including cost of earth. earth to be obtained from outside the corporations area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete including cost of earth with all lead and lift etc. complete. 22 local river sand filling in plinth including supply of necessary quantity of sand from a distances not exceeding 8 kms. ( 5 miles ) from the site of work including watering ramming and dressing etc. rate include cost of all materials, labour and t & p etc. required for proper completion of the work. 23 40 mm. thick c.c. 1:2:4 plain cement concrete with cement, approved coarse sand, and 2cm. ( 3 / 4 ) graded approved stone ballast laid in pannels finished with 3mm. ( 1 / 8 ) floating coat of neat cement and marble dust in ratio of 5:1 as specified over ( without base concrete ) and removing any over lapping mortar at the joints of the pannels, if any, and giving them a uniform finish including supply of all materials labour and t&p etc. required for proper completion of the work without base concrete. 24 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. 25 white washing three coat including supply of all materials, labour and t&p etc. required for proper complection of the work. 26 painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work. 27 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. 28 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p. 29 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered and welded with 100x14x3.15 mm holdfast embedded in cement concrete block15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand and 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should confirm to i.s.1038 1975. ( aluminum beading with rubber packing included ) . 30 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. 31 supply and fixing support clamps for column pipesmade out of ms flats, pairs of bolt nuts etc complete with all material, labour, t&p. 32 supply and installation of 0.5 hp kirloskar or equivalent makehorizontal, self priming, single phase , monoblock tullu pump including cost of labour, t&p and material required for completion of work. 33 supply and installation of india mark ll hand pump including 150 mm dia. 70 m deep boring up to second strata including supply and lowering 110mm to 63mm dia pvc pipe ( 24 metre 110mm & 09metre 63mm dia 6kg / sqm ) with required strainer, reducer joining 90mm dia long cylinder, 32mm dia gi pipe in 3 metre long piece including supply and filling of course sand of approved quality ( approx 0.15 cum ) including developing the bore well to achiveclear and sand free water for continious 60 min. including cost of all material. labour and t&p and its cartage for installation of hand pump complete as per drawing and design and instruction of e / c and making 1.85 metre dia chabutara with excavation of earth and laying 25 mm c.c.floor1:2:4 with cement, c. sand and 20 mm stone ballast, with water proofing compound over 100 mm thik c.c. 1:6:12 with cement , c. sandand 40mm brick ballast and making side edge 115mm thick and 300 mm deep with brick 1:4 and plaster the same with 1:4 mix with neat cement finish also including 115mm wide drain 1:4 brick work & plaster all around the periphery of plateform complete including supply of all materials, labour and t&p etc. required for proper completion of work. rate as per se, 7th mandal, up jal nigam, gorakhpur letter no 1045 dt 16.02.15 34 wiring point for light with 1.5 sq. mm. pvc insulated single core copper conductor cable in heavy guage rigid pvc conduit pipe concealed in the wall, complete with 1.5 sq mm multistand copper earth continuity wire with piano type switch & ceiling rose / angle / batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as. 35 same as above item no.34 but wiring for fan point. 36 same as above item no.34 but wiring for plug point. 37 s / f angle / batten holder. 38 s / f of power plug with 15a / 250 volt flush type switch and 5 pin 15a / 250v flush type universal socket in suitable m.s. box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 39 supply and fixing of switch box 150x150x65mm size of approved make made up of 1.00mm thick isi marked g.p. sheet all 4 corners folded & spot welded for screw and holes plugged with pvc nylon caps. two or more holes for pipe entry of 25.4mm on upper and lower sides of the box.holes should be semi shutterd type and fitted with heavy brss earth piller duly screwed & brand name should be embossed.box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s / o all materials, labour and t&p required for proper complection of work as directed at site by e / i charge. 40 s / wiring sub main with 2 no. 2.5sq mm pvc insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage pvc condut concealed with wall including one number 1.5 sqmm fr pvc insulated multistand copper cable as earth contuity wire drawn in conduit. 41 supply and fixing of led tube light with batten suitable for up to 1x22 watt led light fitting including tube on surface complete in all respect. 42 supply and fixing of 63a 240 volts i.c. cut out of approved make on the metre board or polished mdfeg / teak ply board. complete in all respect. 43 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. 44 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work. 45 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. 46 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 47 supply and fixing of 32mm diag.i. ( b class ) column pipes jtc / jindal make with column coupling socket as required for proper completion of workincluding all labour material & t&p. 48 providing & fixing half turn 20mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.05 ) 49 supply and installation of 32 mm dia outlet size submersible pump set 1.00 h.p.89 / 45 operating head, single phase, ksb or other approved isi marked, standard equivalent make complete with all material, labour, t&p. 50 s / f single phase control panel board for single phase submersible pump sets of 1.00hp ksb / best or other approved make containg rotary on / off switch for mains, the ammeter, volt meter & starter with selector etc. complete in all respect. 51 s / f of 1.5 sq. mm 3 core p.v.c. sheathed p.v.c. insulated water proof isi marked, flat flexible copper cable of best or other equivalent make, for 1hp and up to 3hp submersible pump sets, complete in all respect. 52 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 53 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 54 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 55 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 56 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories ( low level ) including all materials, labour and t&p etc complete. 57 supply and fixing nahani trap india make of heavy approved quality complete with c.p. brass grating, nahani trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and t&p etc. required for proper completion of the work. 58 providing and fixing in position 32 mm. dia p.v.c. waste pipe for wash basin. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 59 supply and fixing of angle valve including all materials, labour and t&p etc. required for proper completion of work as directed by e / i. 60 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mmx140mm hindustan make or other equivalent approved make of ist quality with 100mm dia. white glazed p or s trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour. 61 providing and fixing cp brass piller cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 62 providing and fixing pvc connection pipe, 450x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 63 providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality ( hindutan, neycer make ) i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 64 providing and fixing division plate 600x300 mm white glazed for urinals i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 65 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 66 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work. 67 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. 68 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.17 ) ...

Purvanchal Vidyut Vitaran Nigam Limited - Uttar Pradesh

38535219 providing jan suvidha facility at different sub stations / billing centers of uedc ii distt varanasi under varanasi distribution zone 1 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5 meter ( 5ft ) and lead upto 30 meter ( 100 ft. ) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters ( 100ft. ) from the foundation trenches. 2 concrete with 4cm gauge brick ballast, coarse sandand cement in proportion of 12:6:1 in foundation & under floors including supply of all materials, labour & t&p etc. complete. 3 1st class brick ( class 150 ) work in 1:6 cement and coarse sand ( f.m. 1.5.to 2.0 ) . mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. 4 same as in item no. 3 above b.w. in 1:6 in super structures but for wall one brick ( 230mm ) thick 5 same as in item no. 3 above but b.w. in 1:4 in super structures but for wall up brick ( 115mm ) thick 6 first class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0m depthincluding cutting moulding bricks as required including cost ofall materials labour and t&p complete. 7 s / filling brick bats including supply of material labour t&p etc. complete ( based on materials rates +10% contracor profit ) . 8 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work 9 r.c.c. work with cement, approved coarse sand and 2 cm. ( 3 / 4 ) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. ( binding wire to be supplied by the contractor free of cost ) . 10 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p 11 mild steel or iron in plain work such as reinforced concrete or reinforced brick work. ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend hooks, and authorized overlapping shall be measured. 12 mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work. 13 s / f 8mm thick white glazed somany, johnson etc 1st quality tilesin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 14 s / f 6 mm thick white glazed tilesin skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 15 12 mm ( 1 / 2 ) thick plaster with cement mortar in proportion of 1:6 cement and approved coarse sand over brick work, minimum thickness not to be less than 1 cm. ( 3 / 8 ) including supply of all materials, labour and t&p etc. required for proper completion of the work. ( rates including cost of cement ) 16 same as item no 15 above but in proportion 1:4 cement & coarse sand. 17 same as item no 15 above but in proportion 1:3 cement & coarse sand. 18 add for extra labour and matarials for plaster over rough face of one brick wall. 19 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including cost of all materials, labours and t&ps etc. required for proper completion of the work. 20 providing / making drip course ( 25x12 ) mm in 1:2 cement & coarse sand mortar to a rectangular profession 25mm wide and 12mm thick to a out side of sunsheds and projected slab pattas etc. including cost of all materials, labours and t&p s etc. required for proper completion of work. ( including cost of cement ) . 21 earth filling under floors and in substation area including cost of earth. earth to be obtained from outside the corporations area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete including cost of earth with all lead and lift etc. complete. 22 local river sand filling in plinth including supply of necessary quantity of sand from a distances not exceeding 8 kms. ( 5 miles ) from the site of work including watering ramming and dressing etc. rate include cost of all materials, labour and t & p etc. required for proper completion of the work. 23 40 mm. thick c.c. 1:2:4 plain cement concrete with cement, approved coarse sand, and 2cm. ( 3 / 4 ) graded approved stone ballast laid in pannels finished with 3mm. ( 1 / 8 ) floating coat of neat cement and marble dust in ratio of 5:1 as specified over ( without base concrete ) and removing any over lapping mortar at the joints of the pannels, if any, and giving them a uniform finish including supply of all materials labour and t&p etc. required for proper completion of the work without base concrete. 24 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. 25 white washing three coat including supply of all materials, labour and t&p etc. required for proper complection of the work. 26 painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work. 27 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. 28 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p. 29 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered and welded with 100x14x3.15 mm holdfast embedded in cement concrete block15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand and 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should confirm to i.s.1038 1975. ( aluminum beading with rubber packing included ) . 30 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. 31 supply and installation of 0.5 hp kirloskar or equivalent makehorizontal, self priming, single phase , monoblock tullu pump including cost of labour, t&p and material required for completion of work. 32 wiring point for light with 1.5 sq. mm. pvc insulated single core copper conductor cable in heavy guage rigid pvc conduit pipe concealed in the wall, complete with 1.5 sq mm multistand copper earth continuity wire with piano type switch & ceiling rose / angle / batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as. 33 same as above item no.34 but wiring for fan point. 34 same as above item no.34 but wiring for plug point. 35 s / f angle / batten holder. 36 s / f of power plug with 15a / 250 volt flush type switch and 5 pin 15a / 250v flush type universal socket in suitable m.s. box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 37 supply and fixing of switch box 150x150x65mm size of approved make made up of 1.00mm thick isi marked g.p. sheet all 4 corners folded & spot welded for screw and holes plugged with pvc nylon caps. two or more holes for pipe entry of 25.4mm on upper and lower sides of the box.holes should be semi shutterd type and fitted with heavy brss earth piller duly screwed & brand name should be embossed.box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s / o all materials, labour and t&p required for proper complection of work as directed at site by e / i charge. 38 s / wiring sub main with 2 no. 2.5sq mm pvc insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage pvc condut concealed with wall including one number 1.5 sqmm fr pvc insulated multistand copper cable as earth contuity wire drawn in conduit. 39 supply and fixing of led tube light with batten suitable for up to 1x22 watt led light fitting including tube on surface complete in all respect. 40 supply and fixing of 63a 240 volts i.c. cut out of approved make on the metre board or polished mdfeg / teak ply board. complete in all respect. 41 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. 42 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. 43 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 44 providing & fixing half turn 20mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.05 ) 45 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 46 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 47 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 48 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 49 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories ( low level ) including all materials, labour and t&p etc complete. 50 supply and fixing nahani trap india make of heavy approved quality complete with c.p. brass grating, nahani trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and t&p etc. required for proper completion of the work. 51 providing and fixing in position 32 mm. dia p.v.c. waste pipe for wash basin. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 52 supply and fixing of angle valve including all materials, labour and t&p etc. required for proper completion of work as directed by e / i. 53 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mmx140mm hindustan make or other equivalent approved make of ist quality with 100mm dia. white glazed p or s trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour. 54 providing and fixing cp brass piller cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 55 providing and fixing pvc connection pipe, 450x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 56 providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality ( hindutan, neycer make ) i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 57 providing and fixing division plate 600x300 mm white glazed for urinals i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. 58 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. 59 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour and t&p etc.required for proper completion of the work. 60 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. 61 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.17 ) ...

Purvanchal Vidyut Vitaran Nigam Limited - Uttar Pradesh

38535169 providing jan suvidha facility at different sub stations / billing centers of edc distt varanasi under varanasi distribution zone 1 excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5 meter (5ft) and lead upto 30 meter (100 ft.) and including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters (100ft.) from the foundation trenches. 2 concrete with 4cm gauge brick ballast, coarse sandand cement in proportion of 12:6:1 in foundation & under floors including supply of all materials, labour & t&p etc. complete. 3 1st class brick ( class 150) work in 1:6 cement and coarse sand (f.m. 1.5.to 2.0 ). mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. 4 same as in item no. 3 above b.w. in 1:6 in super structures but for wall one brick (230mm) thick 5 same as in item no. 3 above but b.w. in 1:4 in super structures but for wall up brick (115mm) thick 6 first class brick laid dry in foundation and plinth as incircular soakpit walls of one brick thickness and 2.0 to 3.0m depthincluding cutting moulding bricks as required including cost ofall materials labour and t&p complete. 7 s/filling brick bats including supply of material labour t&p etc. complete ( based on materials rates +10% contracor profit). 8 cement concrete with 2cm gauge approved hard stone ballast,coarse sand (f.m. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and t&p etc. required for proper completion of work 9 r.c.c. work with cement, approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. (binding wire to be supplied by the contractor free of cost). 10 rcc work with cement, approved coarse sand(f.m. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p 11 mild steel or iron in plain work such as reinforced concrete or reinforced brick work. (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend hooks, and authorized overlapping shall be measured. 12 mild steel or iron work in heavy sizes such as trusses, built up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work. 13 s/f 8mm thick white glazed somany, johnson etc 1st quality tilesin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 14 s/f 6 mm thick white glazed tilesin skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. 15 12 mm (1/2) thick plaster with cement mortar in proportion of 1:6 cement and approved coarse sand over brick work, minimum thickness not to be less than 1 cm. (3/8) including supply of all materials, labour and t&p etc. required for proper completion of the work.(rates including cost of cement) 16 same as item no 15 above but in proportion 1:4 cement & coarse sand. 17 same as item no 15 above but in proportion 1:3 cement & coarse sand. 18 add for extra labour and matarials for plaster over rough face of one brick wall. 19 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including cost of all materials, labours and t&ps etc. required for proper completion of the work. 20 providing/making drip course (25x12)mm in 1:2 cement & coarse sand mortar to a rectangular profession 25mm wide and 12mm thick to a out side of sunsheds and projected slab pattas etc. including cost of all materials, labours and t&p s etc. required for proper completion of work. (including cost of cement). 21 earth filling under floors and in substation area including cost of earth. earth to be obtained from outside the corporations area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete including cost of earth with all lead and lift etc. complete. 22 local river sand filling in plinth including supply of necessary quantity of sand from a distances not exceeding 8 kms. (5 miles) from the site of work including watering ramming and dressing etc. rate include cost of all materials, labour and t & p etc. required for proper completion of the work. 23 40 mm. thick c.c. 1:2:4 plain cement concrete with cement, approved coarse sand, and 2cm.(3/4) graded approved stone ballast laid in pannels finished with 3mm.(1/8) floating coat of neat cement and marble dust in ratio of 5:1 as specified over(without base concrete) and removing any over lapping mortar at the joints of the pannels, if any, and giving them a uniform finish including supply of all materials labour and t&p etc. required for proper completion of the work without base concrete. 24 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. 25 white washing three coat including supply of all materials, labour and t&p etc. required for proper complection of the work. 26 painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work. 27 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to i.s.2202 part 1 (1983) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & t&p etc. required for proper completion of work. 28 supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and t&p. 29 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452 1974 as per drawing joints metered and welded with 100x14x3.15 mm holdfast embedded in cement concrete block15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand and 6 part of graded stone (aggregated 20mm. nominal size) s/f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should confirm to i.s.1038 1975. (aluminum beading with rubber packing included). 30 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour,wastage. and t&p etc. required for proper completion of the work. 31 supply and fixing support clamps for column pipesmade out of ms flats, pairs of bolt nuts etc complete with all material, labour, t&p. 32 supply and installation of 0.5 hp kirloskar or equivalent makehorizontal, self priming, single phase ,monoblock tullu pump including cost of labour, t&p and material required for completion of work. 33 supply and installation of india mark ll hand pump including 150 mm dia. 70 m deep boring up to second strata including supply and lowering 110mm to 63mm dia pvc pipe ( 24 metre 110mm & 09metre 63mm dia 6kg/sqm ) with required strainer, reducer joining 90mm dia long cylinder, 32mm dia gi pipe in 3 metre long piece including supply and filling of course sand of approved quality (approx 0.15 cum ) including developing the bore well to achiveclear and sand free water for continious 60 min. including cost of all material. labour and t&p and its cartage for installation of hand pump complete as per drawing and design and instruction of e/c and making 1.85 metre dia chabutara with excavation of earth and laying 25 mm c.c.floor1:2:4 with cement,c. sand and 20 mm stone ballast,with water proofing compound over 100 mm thik c.c. 1:6:12 with cement , c. sandand 40mm brick ballast and making side edge 115mm thick and 300 mm deep with brick 1:4 and plaster the same with 1:4 mix with neat cement finish also including 115mm wide drain 1:4 brick work & plaster all around the periphery of plateform complete including supply of all materials, labour and t&p etc. required for proper completion of work. rate as per se,7th mandal,up jal nigam, gorakhpur letter no 1045 dt 16.02.15 34 wiring point for light with 1.5 sq. mm. pvc insulated single core copper conductor cable in heavy guage rigid pvc conduit pipe concealed in the wall, complete with 1.5 sq mm multistand copper earth continuity wire with piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash as. 35 same as above item no.34 but wiring for fan point. 36 same as above item no.34 but wiring for plug point. 37 s/f angle/batten holder. 38 s/f of power plug with 15a/250 volt flush type switch and 5 pin 15a/250v flush type universal socket in suitable m.s. box of 175mm x 100mm x50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 39 supply and fixing of switch box 150x150x65mm size of approved make made up of 1.00mm thick isi marked g.p. sheet all 4 corners folded & spot welded for screw and holes plugged with pvc nylon caps. two or more holes for pipe entry of 25.4mm on upper and lower sides of the box.holes should be semi shutterd type and fitted with heavy brss earth piller duly screwed & brand name should be embossed.box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and t&p required for proper complection of work as directed at site by e/i charge. 40 s/wiring sub main with 2 no. 2.5sq mm pvc insulated 1100v grade single multistand single core copper conductor cable in 20mm dia heavy gauage pvc condut concealed with wall including one number 1.5 sqmm fr pvc insulated multistand copper cable as earth contuity wire drawn in conduit. 41 supply and fixing of led tube light with batten suitable for up to 1x22 watt led light fitting including tube on surface complete in all respect. 42 supply and fixing of 63a 240 volts i.c. cut out of approved make on the metre board or polished mdfeg/teak ply board. complete in all respect. 43 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. 44 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work. 45 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. 46 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 47 supply and fixing of 32mm diag.i. (b class ) column pipes jtc/ jindal make with column coupling socket as required for proper completion of workincluding all labour material & t&p. 48 providing & fixing half turn 20mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. (csi no. 26.05) 49 supply and installation of 32 mm dia outlet size submersible pump set 1.00 h.p.89/45 operating head, single phase, ksb or other approved isi marked, standard equivalent make complete with all material, labour, t&p. 50 s/f single phase control panel board for single phase submersible pump sets of 1.00hp ksb / best or other approved make containg rotary on/off switch for mains, the ammeter, volt meter & starter with selector etc. complete in all respect. 51 s/f of 1.5 sq. mm 3 core p.v.c. sheathed p.v.c. insulated water proof isi marked, flat flexible copper cable of best or other equivalent make, for 1hp and up to 3hp submersible pump sets, complete in all respect. 52 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 53 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 54 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. 55 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 400gm) ( l & k and equi.) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 56 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories (low level) including all materials, labour and t&p etc complete. 57 supply and fixing nahani trap india make of heavy approved quality complete with c.p. brass grating, nahani trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials,labour and t&p etc. required for proper completion of the work. 58 providing and fixing in position 32 mm. dia p.v.c. waste pipe for wash basin. with unions, bends etc. including supply of all materials,labour and t&p etc.required for proper completion of the work. 59 supply and fixing of angle valve including all materials, labour and t&p etc. required for proper completion of work as directed by e/i. 60 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mmx140mm hindustan make or other equivalent approved make of ist quality with 100mm dia. white glazed p or s trap fittings including cutting & making good the walls and floors wherever required with cement sand and grit mortar not less than 1:4 the seat and trap shall have to be fixed over minimum 3 thick c.c. in proportion of 12:6:1 including cost of all materials, labour. 61 providing and fixing cp brass piller cock heavy quality ( l&k or equi. )fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 62 providing and fixing pvc connection pipe, 450x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. 63 providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (hindutan, neycer make) i.s.i. marked including supply of all materials,labour and t&p etc. required for proper completion of the work. 64 providing and fixing division plate 600x300 mm white glazed for urinals i.s.i. marked including supply of all materials,labour and t&p etc. required for proper completion of the work. 65 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials,labour and t&p etc.required for proper completion of the work. 66 providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and t&p etc.required for proper completion of the work. 67 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked (hindustan,neycer / cera make) including supply of all materials, labour and t&p etc. required for proper completion of the work. 68 providing and fixing of 110 mm dia pvc pipe 6 kg/ sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour,material,t & p etc complete required for proper completion of work. (csi no. 26.17) ...

Kisan Sahkari Chini Mills Limited - Uttar Pradesh

38410930 tender for aluminium lagging work for season 2023 24 2 thermal insulation by providing light raising bonded slap ( lrb slap ) density 100kgs per cubic meter & aluminium sheet 22swg gi wire 20swg fixing of gi screw pin head 8 x 13mm by grooving all joint with necessary overlap etc. job involve the work of cleaning of surface area if required for insulation with material as per isi norm. thickness of lrb slap 25mm 3 thermal insulation by providing light raising bonded slap ( lrb slap ) density 100kgs per cubic meter & aluminium sheet 22swg gi wire 20swg fixing of gi screw pin head 8 x 13mm by grooving all joint with necessary overlap etc. job involve the work of cleaning of surface area if required for insulation with material as per isi norm. thickness of lrb slap 40mm 4 thermal insulation by providing light raising bonded slap ( lrb slap ) density 100kgs per cubic meter & aluminium sheet 22swg gi wire 20swg fixing of gi screw pin head 8 x 13mm by grooving all joint with necessary overlap etc. job involve the work of cleaning of surface area if required for insulation with material as per isi norm. thickness of lrb slap 50mm 5 thermal insulation by providing light raising bonded slap ( lrb slap ) density 100kgs per cubic meter & aluminium sheet 22swg gi wire 20swg fixing of gi screw pin head 8 x 13mm by grooving all joint with necessary overlap etc. job involve the work of cleaning of surface area if required for insulation with material as per isi norm. thickness of lrb slap 75mm...

Ministry Of Power - Uttar Pradesh

38324423 bids are invited for aluminium cladding sheet for insulation 100000725 1 aluminum sheet is 737 19000 / h2 0.91mm 2 aluminum sheet is 737 19000 / h2 1.63mm 3 aluminium sheet corrugated total quantity : 1016...

Department Of Revenue - Uttar Pradesh

38285012 purchase of mixer grinder , calcium hydroxide ar/gr , diethyl ether/ solvent ether ip/bp , ethanol , sulphuric acid ampoule (o.1n) , sodium hydroxide ampoule (o.1n) , hydrochloric acid ampoule (o.1n) , sodium thio sulphate ampoule (o.1n) , methanol ar/gr /hpcl , ethyl acetate ar/gr/hplc , ammonia solution (25%) ar/gr , benzene ar/gr , acetone ar/gr , bismuth sub nitrate gr/lr , petroleum ether/ petromeum benzene(bioling range 40 60 deg. c ) , starch soluble , hydrochloric acid g.r , formaldehyde (min 37%) , hexamine ar/lr , carbon tetra chloride ar/gr , crystal violet indicator , phenophthalein indicator , toluene ar/gr , cyclohexane ar/gr , cupric sulphate , ferric chloride , potassium hydrogen phthalate , hydrogen peroxide solution 30% , fast blue b salt , vanillin lr , p amino phenol lr , tlc plate aluminium sheet (silicagel 60 f254) 20 x20 cm , ammonium chloride ar/gr , buffer solution ph 4.0 , buffer solution ph 7.0 , buffer solution ph 9.0 , buffer solution ph 10.0 , lithium chloride ar/gr (anhydrous) , potassium chloride ar/gr , sodium nitrate ar/gr , silver nitrate pure , ammoniumheptamolybdate hexahydrate , silicon oil (boiling point above 250 deg.c , cobaltous chloride ar/gr , whatman filter paper no.1 (185mm) , absorbent cotton i.p...

Uttar Pradesh Rajkiya Nirman Nigam Limited - Uttar Pradesh

38258262 tender for items rate quotation for civil work in distt jaunpur. 1 civil work 2 excavation infoundation inordinary soil ( loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer i / c within a lead of 30 m.from foundation trenches. 3 filling of available excavated earthin trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. 4 filling by carted earthin trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m. 5 sand filling in plinth including supply of necessary quantity of sand from a distancenot exceeding 8.00kms. from the siteof work includingwatering, dressing etc. labour & t &p etc. required for proper completion of worksaplings of girthupto 30 groundlevel and removal of rubbish upto a distsnceof 50m out side the periphery of area cleared. under floor fine sand. 6 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 7 providing and laying in position machine batched and machine mixed design mix m 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge. ( note : cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) .all works upto plinth level. 8 all works above plinth level upto floor v level. 9 centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete 10 walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc. 11 suspended floors, roofs, landings, balconies and access platform 12 lintels, beams, plinth beams, girders, bressumers and cantilevers. 13 columns, pillars, piers, abutments, posts and struts 14 stairs, ( excluding landings ) except spiral staircases 15 extra for shuttering in circular work ( 20% of respective centering and shuttering items ) in columns. 16 edges of slabs and breaks in floors and walls under 20 cm wide 17 weather shade, chajjas, corbels etc., including edges 18 extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof ( plan area to be measured ) . 19 add for using extra cement in the items of design mix over and above the specified cement content therein. 20 extra for r.c.c. / b.m.c / r.m.c. work above floor v level for each four floors or part thereof.for above five to nine floor level. 21 boring, providing and installation bored cast in situ reinforced cement concrete piles of garde m 25 of specified diameter and length below pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by crawler mounted, telescopic boom hydraulic pilling rig all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) . note: truck mounted rotary / tmr / tube well boring machine shall not be used.600 mm dia piles 22 vertical load testing of piles in accordance with is 2911 ( part iv ) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer in charge.group of two or more piles upto 50 tonne safe capacityinitial test 23 routine test 24 class 150 brick / cement based fly ash brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 25 class 150 brick / cement based fly ash brick work in 1:6 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work 26 gr. floor 27 1st floor 28 2nd floor 29 3rd floor 30 4rth floor 31 5th floor 32 6th floor 33 7th floor / terrace 34 class 150 brick / cement based fly ash reinforced half brick work in 1:4 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. 35 gr. floor 36 1st floor 37 2nd floor 38 3rd floor 39 4th floor 40 5th floor 41 6th floor 42 7th floor / terrace 43 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry. 44 applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 45 providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints, surrounding of pipes and conduits etc.complete ( plinth area of the building at ground floor only shall be measuredas per i.s.6313 ( part ll 1981 ) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.the rate of application of chemical emulsion shall be as follows: ( 1 ) treatment for masonary & foundation 5 litres per sq.m. ( 2 ) back fill in immediate contract with foundation 7.5 litre per sq.m ( 3 ) treatment of top surface of plinth filling 5 liters per sq.m. ( 4 ) treatment of soil along external parameter of building 7.50 lire per sq.m. 46 mild steel or iron in plain work such as in reinforced concreted or reinforced brick work ( when not included in overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. bend hooks and authorized overlapping shall be measured. 47 fixing of steel or wooden chaukhats in position. 48 doors chaukhats 49 window chaukhats 50 ventilator chaukhats 51 providing and fixing ss sliding door bolts isi marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm. 52 providing and fixing ss tower bolts isi marked anodisedtransparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm. 53 providing and fixing ss handles isi marked anodisedtransparent or dyed to required colour or shade with necessary screws etc. complete :125 mm. 54 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screwsetc. complete :300x16 mm 55 250x16 mm 56 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm 57 providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm 58 providing and fixing aluminium window sliding rollerand screws etc. complete as per direction of engineer in charge 59 providing and fixing aluminium window sliding i lock and screws etc. complete as per direction of engineer in charge 60 providing and fixing aluminium casement stays, isi marked, anodised ( anodic coating not less thangrade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. 61 providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. 62 providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. 63 providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 64 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of engineer in charge. ( glazing, panelingand dash fasteners to be paid for separately ) :polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) 65 powder coated aluminium ( minimum thickness of powder coating 50 micron ) 66 for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) . 67 providing and fixing glazing in aluminium door, window, ventilator etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5.00 mm thickness shutters and partitions etc. with epdm rubber / neoprene gasket. 68 p / f acp sheet for partition complete in all respect. as per engg. incharge direction. 69 providingand fixing double action hydraulic floor spring of approved brand and manufacture conforming to is 6315 having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece m.s. sheet outer box with slide palte etc. complete as per the direction of engineer in charge.with stainless steel cover plate minimum 1.25 mm thickness. 70 providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to is: 1868 with minimum anodic coating of grade ac 15 ) of approved design / pattern, with approved standard section and fixed to the existing window frame with c.p. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer in charge. ( only weight of grill to be measured for payment ) . 71 providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer in charge ( door handle, lock and stopper etc.to be paid separately ) . 72 providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade ( yield strength 480 n / mm2 ) , counter sunk head, comprising of 10 m dia polyamide pa 6 grade sleeve, including drilling of hole in frame , concrete / masonry, etc. as per direction of engineer in charge. 10 x 120 mm 73 providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. with 12 mm mild steel u beading. 74 providing and fixing 1.25 mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces 75 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) non decorative type, core of block board construction with frame of 1st class hard wood and with decorative both side high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to is : 2046 type s, including cost of adhesive of approved quality of 1.0 mm thick including 32x5 mm teak wood lipping on edges of shutters.35 mm thick including isi marked stainless steel butt hinges with necessary screws 76 extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters ( over all area of door shutter to be measured ) . 77 extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors ( cost of glass excluded ) ( overall area of door shutter to be measured ) : rectangular or square 78 extra if louvers ( not exceeding 0.2 sqm ) are provided in flush door shutters ( overall area of door shutters to be measured ) . 79 providing and fixing stainless steel ( grade 304 ) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc. 80 providing and laying brick coba 12 mm thick laid with m 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortarmixedwithwater proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s / o all material, labour, t&p etc complete for proper completion of work. 81 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement: 6 coarse sand ) on outer side of outer wall. 82 upto 10 m. from gr. level 83 10 m to 13 m. 84 13m to 16 m 85 16m to 19 m 86 19m to 22 m 87 22m to 25 m 88 25 m to 28 m 89 28 m to 31 m 90 31m to 34 m 91 34 m to 37 m 92 37 m to 40 m 93 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 ( 1 cement: 6 coarse sand ) on one side of inner wall. 94 12 mm cement plaster on smooth side of single or half brick wall of mix : 1:6 ( 1 cement: 6 coarse sand ) . 95 12 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. ( i ) 1 cement: 3 course sand in ceiling. 96 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers 97 making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required. 98 add for plaster drip course / groove in plastered surface or moulding to r.c.c. projections 99 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more ( thickness to be specified by the manufacturer ) laid on a bed of 10 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including grouting the joints with white cement and matching pigments etc., complete. 100 providing and laying vitrified floor tiles kajaria kerro brand or equivalent brand of super quality in different size ( thickness specified by manufacturer ) with water absorption make in all colors and shade laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) including grouting the joint with white cement and matching pigments etc. complete ( size of tile 600 x 600 mm ) 101 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels granite of any colour and shadea rea of slab over 0.50 sqm 102 providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) , laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. 103 providing edge moulding to 18 mm thick granite stone, including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 104 kota stone slab flooring over 20 mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) : 105 kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average ) thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 106 providing and fixing glass strips in joints of terrazo / cement concrete floors. 40 mm wide and 4 mm thick 107 wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work. 108 finishing walls with textured exterior paint of required shade new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm texture of minimum film thickness 1.0 mm. 109 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 110 paintingtwpcoatsover priming coat on steel & other metal surface upto 10 cm width or grith or small articles not exceeding 0.10 sqmt. in areas with superior synthetic enamel such as luxol3hi gloss aqcolite superlac. dulux specified finishing. 111 french spirit polishing :two or more coats on new works including a coat of wood filler 112 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes. 113 providing and fixing m.s. holder bat clamps of approved design to c.i. or s.c.i. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and cost of cutting holes and making good the walls etc. : for 100 mm dia pipe 114 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.single tee without door 110x110x110 mm 115 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.bend 87.5° 110 mm bend 116 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.shoe ( plain ) 110 mm shoe 117 providing and fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.single tee with door 110x110x110 mm 118 making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 119 providing / laying of light cinder filling / 25 mm o.b. brick ballast under floor of toilet / sunken roofs 120 providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of w.c., kitchen and the like consisting of: ( i ) ist course of applying cement slurry @ 4.4 kg / sqm mixed with water proofing compound conforming to is 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ( ii ) iind course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. 121 ( iii ) iiird course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. ( iv ) ivth course of 400 micron thick pvc sheet. ( overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg / sqm ) . 122 core cutting 4 6 dia pipe 123 providing and making cornice at slab level including all meterial like steel, concrete, shuttering and scaffolding required for proper completion of work. 124 providing and fixing of expansion joint system related with wall joint ( internal / external ) location as per drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per astm b221 02. the material shall be such that it provides an expansion joints system suitable for vertical wall to wall / wall to corner application, both new and existing construction in office buildings & complexes with no slipping down tendency amongst the components of the joint system. 125 the joint system shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. ( material shall confirm to astm 6063. ) wall joint of 100 mm gap. 126 the cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self centering arrangement that freely rotates / moves in all directions. the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. the joint system shall resists damage or deterioration from the impact of falling ice, exposure to uv, airborne contaminants and occasional foot traffic from maintenance personnel. provision of moisture barrier membrane in the joint system to have water tight joint is mandatory requirement. material shall confirm to astm 6063. roof joint of 100 mm gap 127 white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests 128 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 129 w.c. pan with isi marked white solid plastic seat and lid 130 providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 131 providingandfixing wash basin with c.i.brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting andmaking good the walls where required : 132 white vitreous china wash basin size 550x400 mm with a pair of 15 mm c.p. brass pillar taps 133 white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap 134 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 135 range of two urinal basins with 5 litre white p.v.c. automatic flushing cistern 136 range of three urinal basins with 10litre white p.v.c. automatic flushing cistern 137 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth 138 granite stone of approved shade 139 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 140 510x1040 mm bowl depth 225mm. 141 610x510 mm bowl depth 200mm. 142 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : 143 size 600x450x200 mm 144 providing & fixing pvc waste pipe for sink oncluding pvc waste fitting complete 145 32mm dia 146 40mm dia 147 providing and fixing ptmt bottle trap for wash basin and sink. 148 bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 149 bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. ( sink & urinal ) 150 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 151 circular shape 450 mm dia 152 rectangular shape 1500x450 mm 153 providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 154 providing and fixing toilet paper holder : 155 c.p. brass 156 providing and fixing soil, waste, vent pipes 157 centrifugally cast ( spun ) iron s&s pipe 158 100mm dia cast ( spun ) iron s&s pipe 159 150mm dia cast ( spun ) iron s&s pipe 160 providing and fixing ms holder bat clamps of approved design to cast iron ( spun ) pipe embedded in and including cement concrete blocks 10 x10 x10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc. 161 for 100mm dia. pipe 162 for 150mm dia. pipe 163 providing and fixing heel rest sanitary bend, in centrifugally cast ( spun ) iron pipe s&s 164 100mm 165 150mm 166 providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 167 100x100x100mm 168 sand cast iron s&s as per is : 3989 169 150x150x100mm 170 sand cast iron s&s as per is : 3989 171 providing and fixing plain junctionof required degree 172 100x100x100mm 173 sand cast iron s&s as per is : 3989 174 150x150x100mm 175 sand cast iron s&s as per is : 3989 176 providing and fixing terminal guard: 177 100mm 178 sand cast iron s&s as per is 3989 179 150mm 180 providing and fixing collar. 181 100mm 182 sand cast iron s&s as per is 3989 183 150mm 184 providing and lead caulked joint 185 100 dia 186 150 dia 187 providing and drip seal joint 188 100 dia 189 150 dia 190 providing and fixingcast iron trap of self cleansing design withcast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 191 100 mm inlet and 100 mm outlet, sand cast iron s&s as per is: 3989 192 painting sand cast iron / centrifugally cast iron ( spun ) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer ( of approval quality ) for new work 193 100mm dia 194 150mm dia 195 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. 196 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms 197 providing and fixing ptmt towel rail complete with brackets fixed wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 198 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 199 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc.internal work exposed on wall 200 15 mm dia nominal bore 201 20 mm dia nominal bore 202 25 mm dia nominal bore 203 32 mm dia nominal bore 204 40 mm dia nominal bore 205 50 mm dia nominal bore 206 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 207 15 mm nominal outer dia pipes 208 20 mm nominal outer dia pipes 209 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. external work 210 40 mm dia, nominal bore 211 50 mm dia, nominal bore 212 65 mm dia, nominal bore 213 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 214 25mm dia, nominal bore 215 32 mm dia, nominal bore 216 40 mm dia, nominal bore 217 50 mm dia, nominal bore 218 providing and fixing uplasticised pvc connection pipe with brass unions : 219 45 cm length 220 15 mm nominal bore 221 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet100 mm diameter 222 painting g.i. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work ( internal work exposed on walls ) 223 15 mm dia nominal bore 224 20 mm dia nominal bore 225 25 mm dia nominal bore 226 32 mm dia nominal bore 227 40 mm dia nominal bore 228 50 mm dia nominal bore 229 painting gi pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality 230 40 mm dia, nominal bore 231 50 mm dia, nominal bore 232 65 mm dia, nominal bore 233 providing and filling sand of grading zone v or coarser grade, allround the g.i. pipes in external work 234 40 mm dia, nominal bore 235 50 mm dia, nominal bore 236 65 mm dia, nominal bore 237 providing and fixingg.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete ( new work ) 238 15mm nominal bore 239 20mm nominal bore 240 25mm nominal bore 241 32mm nominal bore 242 40mm nominal bore 243 50mm nominal bore 244 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 245 15mm nominal bore 246 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore. 247 15 mm nominal bore 248 providing and fixing ptmt grating of approved quality and colour 249 100 mm nominal dia 250 providing and placing on terrace ( at all floor levels ) rcc water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including all necessary fittings and the base support for tank. 251 excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 252 pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 253 providing, laying and jointing glazed stoneware pipes grade ‘a’ with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete : 254 150 mm diameter 255 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size ) all round s.w. pipes including bed concrete as per standard design : 256 150 mm diameter s.w. pipe 257 providing and fixing square mouth s.w. gully trap grade a’ complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 258 100x100 mm size p type 259 with f.p.s. bricks class designation 75 260 providing and laying non pressure np2 class ( light duty ) r.c.c. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete : 261 250 mm dia rcc pipe 262 constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) r.c.c. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 grade 263 inside size 90x80 cm and 45 cm deep including c.i. cover with frame ( light duty ) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg ) : 264 with f.p.s. bricks with class designation 150 265 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) : 266 with f.p.s. bricks class designation 150 267 extra for depth for manholes : 268 with common burnt clay f.p.s. ( non modular ) bricks of class designation 150 269 size 120x90 cm 270 with common burnt clay f.p.s. ( non modular ) bricks of class designation 150 271 constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 ( 1 cement :4 coarse sand ) inside cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement foundation concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) and making necessary channel in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement, all complete as per standard design : 272 1.68 m deep with sfrc cover and frame ( heavy duty hd 20 grade designation ) 560 mm internal diameter conforming to i.s. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including centering, shuttering all complete. ( excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately ) : 273 with common burnt clay f.p.s. ( non modular ) bricks of class designation 150 274 with common burnt clay f.p.s. ( non modular ) bricks of class designation 150 275 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 276 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 277 providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) , joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 278 area of slab upto 0.50 sqm 279 area of slab over 0.50 sqm 280 extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 281 providing and laying in position machine batched and machine mixed design mix m 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge. ( note : cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 282 all works above plinth level. 283 centering and shuttering including strutting, propping etc. and removal of form for : 284 platform & rcc shelves 285 mild steel or iron in plain work such as in reinforced concreted or reinforced brick work ( when not included in overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. bend hooks and authorized overlapping shall be measured. 286 providing and fixing aluminium work for louvers with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. powder coated aluminium ( minimum thickness of powder coating 50 micron ) . 287 providing and fixing of health faucet including materilal, labour, t & p etc. complete. cat no. jaquar ale 583 288 ng clamp including complete in all respect as per engg incharge 289 boundrywall 290 earth work in trenches for foundation, pipes, cable etc in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of e / i. 291 p.c.c. work with cement approved coarse sand and 40 mm gauge approved stone ballast in proportion of 1:4:8incl. cost of form work in foundation & floor. 292 class 150 brick work laid in 1:6 ( 1cement and 6 coarse sand ) in superstrecture including cost of all material and t&p etc required for proper completion of work. 293 class 150 brick work laid in 1:6 ( 1cement and 6 coarse sand ) in superstrecture including cost of all material and t&p etc required for proper completion of work. 294 r.c.c. work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion of 1:1.5:3 in rcc raft foundation and footing, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including s / o all materials required for proper completion of the work. binding wire to be supplied by the contractor free of cost. 295 r.c.c. work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion of 1:1.5:3 in column, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including s / o all materials required for proper completion of the work. binding wire to be supplied by the contractor free of cost. 296 r.c.c. work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion of 1:1.5:3, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including s / o all materials required for proper completion of the work. binding wire to be supplied by the contractor free of cost. but in plinth beams in 1:1.5:3i.e. having spans upto 6 metres. 297 mild steel or iron in plan work such as reinforced concerte or reinforced brick work ( when not included in overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level. 298 mild steel or iron in small size and section such as grills etc wrought to required shape as necessary including bending and welding for proper completion of work and including supply of steel its wastage 299 c.c. work with cement approved coarse sand and 20 mm gauge approved stone ballast in proportion of 1:2:4incl. cost of form work in coping 300 12 mmplaster in 1 part cement and 6 part coarse sand incl. cost of all material and t&p etc reqd. for proper completion of work 301 15 mmplaster in 1 part cement and 6 part coarse sand including cost of all material and t&p etc required for proper completion of work 302 finishing of wall with water proofing cement paint of approved quality two coat and required said on under coated wall including 1 coat white cement priming to give an even shade after throughly brushing the surface etc. complete 303 providing and fixing of expansion joint system related with wall joint ( internal / external ) location as per drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per astm b221 02. the material shall be such that it provides an expansion joints system suitable for vertical wall to wall / wall to corner application, both new and existing construction in office buildings & complexes with no slipping down tendency amongst the components of the joint system. the joint system shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. ( material shall confirm to astm 6063 ) . 304 painting 2 coats over one primer coat over new steel workincluding cost of all material and t&p etc required for proper completion of work 305 filling by carted earth from a distance at site, in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50 m & lift upto 1.50m. 306 the rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer in charge. ( structural frame work including m.s. plate to be provided separately. rectangular area of the sheet only shall be measured for payment ) .overhead informatory road signage 307 the boards will be fixed to 1 no. 50x50 mm square post made of m.s. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti theft arrangement .sheet work to be painted with two or more coats of synthetic enamel paint over an under coat ( primer ) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of engineer in charge. 308 boundrywall 309 1.68 m deep with sfrc cover and frame ( heavy duty hd 20grade designation ) 560 mm internal diameter conforming toi.s. 12592, total weight of cover and frame to be not less than182 kg. fixed in cement concrete 1:2:4 ( 1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size ) including centering, shuttering all complete. ( excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately ) : 310 with common burnt clay f.p.s. ( non modular ) bricks of classdesignation 7.5 311 extra depth for circular type manhole 1.22 m internal dia ( at bottom ) beyond 1.68 m to 2.29 m : 312 with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 313 providing and laying hdpe pipewith 10 kg pressure including all assesaries such as valve, service saddle, tee band and trenching, backfilling , shifting of line , making chamber , jointing of pipe with butt fusion and testing complete as per desiser of engineer in charge. 314 160 mm 315 110 mm 316 90 mm 317 constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 318 with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 319 with f.p.s. bricks class designation 75 320 0.00 to 1.0 m depth 321 providing and fixing 3 layer pp r ( poly propylene random copolymer ) pipes, u v stabilized & anti microbial fusion welded, having thermal stability for hot & cold water supply, including all pp r plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of engineer in charge. 322 pn 16 pipe, 32 mm od ( sdr 7.4 ) 323 pn 16 pipe, 40 mm od ( sdr 7.4 ) 324 pn 16 pipe, 50 mm od ( sdr 7.4 ) 325 providing and fixing gun metal gate valve with c.i. wheel of approved quality ( screwed end ) : 326 32 mm nominal bore. 327 40 mm nominal bore. 328 50 mm nominal bore. 329 providing and fixing c.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 330 100 mm diameter 331 class i 332 constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 333 drain 334 earth work in excavation in trenches for foundations pipes cable etc in ordinary soil ( loan clay or sand ) including lift upto 1.5 m. lead upto 50m and dressing of sides and rammings of bottom and disposal of surplus exdavated earth as directed by the engineer i / c within a lead of 50m. 335 providing and laying in cement concrete 1:4:8 ( 1 cement 4 coarse sand :8graded stone aggregate 40 mm nominal size ) and curing complete, including cost of form work, in foundation and floors. 336 providing and laying in position machine batched and machine mixed design mix m 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge. ( note : cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverable separately ) . 337 all works upto plinth level. 338 centering and shuttering including strutting, propping etc. and removal of form for: 339 foundations, footings, bases of columns, etc. for mass concrete 340 walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc. 341 suspended floors, roofs, landings, balconies and access platform 342 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hookes and authorised averlapping shall be measured upto floor two level. 343 cc road 344 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 345 extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density ( proctor density ) . 346 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 347 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 ( 1 cement: 4 course sand ) . 348 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone ballast 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 349 construction of granular sub base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at omc, carriage of mixed material byippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as perpecifications and directions of engineerin charge with material conforming to grade ii ( size range 53 mm to 0.075 mm ) having cbr value 25 350 providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer incharge 351 cutting andmaking expansion joint size of 8mm width and 18 20 mm deep in rcc road through to heavy duty rcc cutting machine and filling polysulphide sealent in expansion joint size of 8 mm wide and 3 mm depth including sealent 8mm x 15 mm with debounding strips as per direction of engineer in charge. 352 providing and laying at or near ground level factory made kerb stone of m 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5mm ) , including making drainage opening wherever required complete etc. as per direction of engineer in charge ( length of finished kerb edging shall be measured for payment ) . ( precast c.c. kerb stone shall be approved by engineer in charge ) . 353 providing and laying factory made coloured chamfered edge cement concrete paver blocks of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of engineerin charge. 60mm thick c.c. paver block of m 35 grade with approved colour, design & pattern. 354 mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates ) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. its wastage bend, hookes and authorised averlapping shall be measured upto floor two level. 355 landscape & horticulture 356 trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water ( excluding cost of imported earth, sludge or manure ) . 357 supplying and stacking of good earth at site including royalty and carriage up to 1 km ( earth measured in stacks will be reduced by 20% for payment ) . 358 supplying and stacking at site dump manure from approved source, including carriage up to 1 km ( manure measured in stacks will be reduced by 8% for payment ) : screened through sieve of i.s. designation 16 mm 359 fine dressing of the ground 360 mixing earth and sludge or manure in the required proportion specified or directed by the officer in charge.. 361 grassing with selection no.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed ( the good earth shall be paid for separately ) . 362 with grass turf 363 preparation of beds for hedging and shrubbery by excavating 60 cmdeep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8% ) , flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete ( cost of sludge, manure or extra earth to be paid for separately ) . 364 digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume ( 2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8% ) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately ) : 365 holes 90 cm dia, and 90 cm deep 366 supply of plants 367 providing and displaying foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm cement pot as per direction of the officer in charge. 368 supply and stacking of plant thuja compacta of height 75 90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer in charge. 369 jhuepesons 370 providing and displaying washingtonia filifera palm plant well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm cement pot as per direction of the officer in charge. 371 providing and displaying phoenix roebelenii palm plant well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm cement pot as per direction of the officer in charge. 372 providing and displaying bismarkia palm plant 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm cement pot as per direction of the officer in charge. 373 providing and displaying cycus cirsnallis plant well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm cement pot as per direction of the officer in charge. 374 providing and displaying topiary plant of ficus nuda well developed with fresh & healthy foliage from top to bottom with single piller 75 to 90 cm spread, 195 to 210 cm ht. in 35 cm cement tray / cement pot as per direction of the officer in charge. 375 supply and stacking of grevillea robusta ( silver oak ) plant of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer incharge. 376 supply and stacking of plumeria acutifolia plant of height 150 165 cm. with 3 4 branches in big size hdpe bag as per direction of the officer in charge 377 f. bajarina 378 supply and stacking of chorisia speciosa plant of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer in charge. 379 supply and stacking of polyalthia pendula ( ashok pendula ) plant of height 180 195 cm. in gunny bag of size 30 cm as per direction of the officer incharge. 380 teeona gemi chari 381 supply and stacking of polyalthia longifolia ( ashok ) plant of height 180 195 cm. in gunny bag of size 30 cm as per direction of the officer incharge. 382 banhina 383 group of flower shrubs ie hibisens, exera, f. stanlight, callandra, teeoma capansis ratki etc 384 surearia 385 hansphar 386 providing and displaying of areca palm plant, having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of bucket type cement pots & as per direction of the officer in charge. 387 providing and displaying of raphis palm specimen plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of earthen pot / chali / tray & as per direction of the officer in charge. 388 flowering & indoor potted plants in 10 earthern pots 389 earth work in trenches for foundation, pipes, cable etc in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of e / i. 390 extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. all kinds of soil 391 below ground 1.5 to 3.00 m 392 below ground 3.0 to 4.5 m 393 below ground 4.5 to 6.0 m 394 below ground 6.0 to 7.5 m 395 below ground 7.5 to 9.0 m 396 below ground 9.0 to 10.5 m 397 providing and laying cement concrete 1:4:8 ( 1cement :4 coarse sand :8graded stone aggregate 40 mm. nominal size ) including supply of all materials, labour and t&p etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation. 398 providing and laying in position machine batched and machine mixed design mix m 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge. 399 all works up to plinth level. 400 all works above plinth & up to floor v level. 401 centering and shuttering including strutting, propping etc. and removal of form for : 402 foundations, footings, bases of columns, etc. for mass concrete 403 walls ( any thickness ) including attached pilasters, butteresses, plinth and string courses etc. 404 suspended floors, roofs, landings, balconies and access platform 405 lintels, beams, plinth beams, girders, bressumers and cantilevers 406 columns, pillars, piers, abutments, posts and struts 407 class 150 brick work in 1:6 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 408 class 150 brick work in 1:3 cementand coarse sandmortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 409 class 150 brick work in 1:6 cementand coarse sandmortar in superstructure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work 410 mild steel or iron in plain work such as in reinforced concreted or reinforced brick work ( when not included in overall rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. bend hooks and authorized overlapping shall be measured. 411 12 mm cement plaster in single coat on smooth side of single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. ( iii ) 1cement :6 c. sand 412 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth ( i ) 1 cement: ( iii ) 1 cement: 6 coarse sand 413 6 mm cement plaster of mix :1:3 ( 1 cement : 3 fine sand ) in ceiling of rcc roof or beam. 414 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade : new work ( two or more coats applied @ 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 415 providing and fixing 1 mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces 416 supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover 417 providing and fixing ball bearing for rolling shutter 418 providing and fixing stainless steel ( grade 304 ) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc. 419 painting 2 coats over one primer coat over new steel workincluding cost of all material and t&p etc required for proper completion of work 420 providing and laying brick coba 12 mm thick laid with m 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortarmixedwithwater proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including s / o all material, labour, t&p etc complete for proper completion of work. 421 providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to is:2645 in recommended proportions with a gap of 20 mm ( minimum ) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by engineer in charge : using rough kota stone. 422 planning, design, engineering, procurement, construction, installation, testing, commissioning and thereafter operation & maintenance for 120 months of stp & etp with all allied works of 1.00 mld capacity 423 planning, designing, engineering, construction, procurement, installation, testing, commissioning, trial of proposed1.0 mld sewerage treatment plant ( stp ) including civil, mechanical, electrical and instrumentation works for stp sub units namely – oil and grease traps, equalization tank, equalized effluent transfer pump house, ph correction tank, chlorination tank, chemical dosing tanks ( lime, feso4, polymer, urea , dap etc. etc ) , parshal flume, fine screen & chamber, gritchamber, flashmixer, clariflocculator, aeration tank, secondary clarifier, chemical sludge sump, biological sludge sump, dewatering polymer dosing ( chemical sludge ) , dewatering polymer dosing ( biological sludge ) , chemical & biological sludge pump house, flash mixer beforefiltration, deep bed filters, chlorination tonner house, chemical & biological centrifuge house, sludge drying bed, chemical house, chemical & biological storage area, backwash tank, filtered effluent storage tank, internal road parking, boundary wall, horticulture works, campus lighting, flow meters, all pumping machinery such as equalized lifting pumps, clarifier mechanism both for primary and secondary clarifier, machinery for flash mixers, air blowers, chlorine tonner, pumping machinery for pumping of biological and chemical sludge, pumping of treated water effluent, rising main from treated effluent sump to the nearby drain with sluicevalves , non return valves, air valves and other accessories including connection to recycling network, water supply service line for providing water supply to all units wherever required, all ht, lt panels their rooms for air blowers etc., including bye pass arrangement & trial run during the stabilization period. the scope of work also includes the construction of boundary walls, roads & pathways, landscape & horticulture, and campus lighting etc. at stp site. civil, mechanical, electrical required for proper performance shall form the part of the scope complete in all respect. 424 planning, designing, engineering, construction, procurement, installation, testing, commissioning, trial of proposed1.0 mld sewerage treatment plant ( etp ) including civil, mechanical, electrical and instrumentation works for stp sub units namely – oil and grease traps, equalization tank, equalized effluent transfer pump house, ph correction tank, chlorination tank, chemical dosing tanks ( lime, feso4, polymer, urea , dap etc. etc ) , parshal flume, fine screen & chamber, gritchamber, flashmixer, clariflocculator, aeration tank, secondary clarifier, chemical sludge sump, biological sludge sump, dewatering polymer dosing ( chemical sludge ) , dewatering polymer dosing ( biological sludge ) , chemical & biological sludge pump house, flash mixer beforefiltration, deep bed filters, chlorination tonner house, chemical & biological centrifuge house, sludge drying bed, chemical house, chemical & biological storage area, backwash tank, filtered effluent storage tank, internal road parking, boundary wall, horticulture works, campus lighting, flow meters, all pumping machinery such as equalized lifting pumps, clarifier mechanism both for primary and secondary clarifier, machinery for flash mixers, air blowers, chlorine tonner, pumping machinery for pumping of biological and chemical sludge, pumping of treated water effluent, rising main from treated effluent sump to the nearby drain with sluicevalves , non return valves, air valves and other accessories including connection to recycling network, water supply service line for providing water supply to all units wherever required, all ht, lt panels their rooms for air blowers etc., including bye pass arrangement & trial run during the stabilization period. the scope of work also includes the construction of boundary walls, roads & pathways, landscape & horticulture, and campus lighting etc. at stp site. civil, mechanical, electrical required for proper performance shall form the part of the scope complete in all respect. 425 estimate for 300mm x200 mm dia tube well drilled by rotary rig to a depth of 350 meter below ground level with 800 lpm submersable pump set and pipe line work 426 transportation of heavy rig machine 1 job 427 erection and dismantling of rig machine 428 water suply charge ands and driling machine. 429 drilling 200mm dia bore hole in alluvium other than rock, sand stone & boulder formations: from g.l. to 350 m 430 reaming of 200 mm dia pilot bore to 675 mm dia bore: from g.l. to 130 m. 431 washing of bore hole. 432 electric loging of bore hole by electric logger. 433 providing & lowering of assembly pipe including cutting & welding by providing a collar: 434 300 mm dia ms erw housing pipe having wall thickness 7 mm. 435 300 mm dia ms erw slotted pipe having wall thk. 8.00 mm. 436 providing and fixing well cap , reducer, clamp, centre guide & bail plug. 437 providing and packing the bore hole with suitable size of pea gravel. 438 development by high velocity jetting toughter with air compressor: 439 transportation of air compressor 440 erection of air compressor 441 runing of air compressor 442 development of tubewell by o.p. unit 443 transportation of o.p. unit 444 erection of o.p. unit 445 development of tubewell by o.p. unit 446 water testing chemical and bactriological 447 supply and installation of 800 lpm discharge submersable pump complete 448 100 mm pipe line work to connect tubewell...

Indian Army - Uttar Pradesh

38244592 bids are invited for g1 / 5315 000649 nails steel lath cut 1.6mm x 4.8mm x 10 mm is:6734 :1972 ( latest ) f1 / 4930 000018 oiler hand lubricating with spout 250 ml is:4561 ( part v ) , 1968 ( latest ) & annexure ‘a’ g2 / 9535 000016 aluminium sheet half hard 4.60mm is:737 2008 ( reaffirmed 2018 ) , designation 19000 condition hx2 or hx4 g2 / 3439 000093 rod welding steel mild 5.00mm is 1278 1972 ( reaffirmed 2019 ) , type sfs 1 g2 / 3439 000071 electrode cutting solid 4.00mm proprietery article...

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - Uttar Pradesh

38164272 supply of insulation pads lrb wool gp gi aluminum sheet and fixing the same over main boiler various ducts of boiler area mill area fan area id fd pa etc steam water drain lines boiler drum aph and over outer surface of id fd pa fans for unit 3 and 4...

Indian Army - Uttar Pradesh

38100544 bids are invited for boq of ord items x 2 mm , g1 5315 000656 nails steel wire round 40 mm x 2 mm , g1 5315 000659 nails steel wire round 50mm x 2.5mm , g1 5315 000662 nails steel wire round 75mm x 3.15mm , g1 5315 000665 nails steel wire round 125 mm x 5.6mm , g1 5315 000666 nails steel wire round 150 mm x 6.3mm , g1 5315 000817 nails steel wire round 50mm x 2.8mm , g1 5315 000818 nails steel wire round 50mm x 3.15mm , g1 5315 000821 nails steel wire round 70mm x 2.8mm , g2 9505 000003 wire steel mild bright 4.00mm , g2 9505 000009 wire steel mild annealed 1.60mm , g2 9505 000012 wire steel mild annealed 1.00mm , g2 9505 000059 wire steel mild galvanised 0.56mm , g1 5340 000903 hinges steel butt 50m , g1 5340 000942 hinges steel tee 450mm , y3 6145 005958 cable electrical htp13 1a , g2 9530 000125 aluminium bar round 12.5mm , g2 9535 000004 aluminium sheet hard 1.22mm total quantity : 1033...

Uttar Pradesh Jal Nigam - Uttar Pradesh

38046654 supply of rate for civil, electrical, sanitoryand other materials at asra yojana auraiya as per nit and tender document , earth work in excavation in trenches for foundation pipes, cable etc in ordinary sol ( loam clay or sand ) inlcuding lift upto 1.5 mt. lead upto 30mt. and dressing of sides and rammings of bottom and disposal of surplus excavated earth as directed by the engineer. , upto 1.50 m to 3.00 m deep , upto 3.00 m to 4.50 m deep , upto 4.50 m to 6.00 m deep , filling of carted earth , laying in position cement concrete of specifiedgrade including the cost of centring and shuttering all work upto plinth level. , in cement concrete 1:4:8 ( 1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size ) , in cement concrete 1:2:4 ( 1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size ) , providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. ( plinth area of the building at ground floor only shall be measured as per i.s.6313 ( partii 1981 ) alderine emulsifiable concentrate or any other approved material such as heptrachlor or chlordane will be used. the rate of application of chemical emulsion shall be as follows : ( 1 ) treatment for masonary & foundation 5 liters per sqm. ( 2 ) back fill in immediate contact with foundation 7.5 liters / sqm ( 3 ) treatment of top surface of plinth filling 5 liters / sqm ( 4 ) treatment junction of wall and the floor 7.5 liters / sqm ( 5 ) treatment of soil along external perimeter of building 7.5 liters / sqm ( 6 ) treatment of soil under apron along external perimter 5 liters / sqm. ( as per manufacturers standard dilution ) , r.c.c. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also excluding supply of all materials, and including labour and tools and plants etc, required for proper completion of the works. , ground floor , first floor , second floor , as in item no. 6 above but for slabs ( using 1:1.5:3 mix concrete ) . , ground floor , first floor , second floor , as in item 6 but for thelighterbeams i.e. having spans upto 6 m. ( using 1:1.5:3 mix concrete ) , ground floor , first floor , second floor , as in item 6 abovebut inr.c.c.raft foundation and footingwithapproved stone ballast. ( using1:1.5:3mix concrete ) , as in item 6 above but in r.c.c. columns in 1:1.5:3 having strength not less than m 20. , ground floor , first floor , second floor , m 150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth includinglabour and t & p etc & excluding supply of all materials, required for proper completion of the work. , m 150 brick work in 1:4 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar infoundation & plinth includinglabour and t & p etc & excluding supply of all materials, required for proper completion of the work. , laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone iii ) : 4 graded stone aggregate 12.5mm nominal size ) , applying a coat of residual petroleum bitumen of grade of vg 10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. , same as in item no. 11 abovebutin super structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. ( 1:6 cement : coarse sand ) , ground floor , first floor , second floor , same as in item no. 14 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. , ground floor , first floor , second floor , mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and excluding supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. , ground floor , first floor , second floor , 15 mm cement plaster on rough side of single or half brick wall of mix : 1:3 ( 1 cement: 3 coarse sand ) , 15 mm cement plaster in single coat on rough side of single or halfbrick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand . , ground floor , first floor , second floor , 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 finesand. , ground floor , first floor , second floor , engraving lines in the plaster of outer face well vertically & horizontally to display the surface as stone facing as directed by the engineer in charge including labpur, & t & p etc. required for proper completion of the work. , ground floor , first floor , second floor , add for plaster drip course / groove in plastered surface or moulding to r.c.c. projections. , laying 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete including supply of all labour, t & p etc. excluding the cost of materials required for proper completion the work. , ground floor , first floor , second floor , laying 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) finishing with cement slurry & with pigment grouting & polishing complete including supply of all labour, t & p etc. excluding the cost of materials required for proper completion the work. , ground floor , first floor , second floor , kota stone slab flooring over 20 mm ( average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) : 25 mm thick , ground floor , first floor , second floor , kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average ) thick cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. , ground floor , first floor , second floor , fixing of 6 mm thick approved china white / coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment and polishing complete includinglabour and tool sand plants & excluding supply of all materials, etc. required for proper completion of the work. , ground floor , first floor , second floor , 25 mm thick cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 12.5mm nominal size and below ) by laid over base concrete finished with floating coat of neat cement ( base concrete to be paid separately ) including fixing of glass strips. ( excluding cost of glass strips ) , supply of flush doors commercial qualityconforming to i.s.2202 part i ( 1983 ) including fixing of wooden cleats and stoppers , 35 mm thick , ( a ) single leaf , ( b ) double leaf , 32 mm thick , ( a ) single leaf , extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shutters conforming to is: 2202 ( part i ) , fixing of flush / pvc doors including fixing of wooden / pvc cleats and stoppers and includingfixing and adjustment of hinges, bolts, locks, handle, springs. fittings to be supplied departmentally. , supply of factory made panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame covered with 5 mm thick heat moulded pvc ‘c’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided both side of the panel. 10 mm ( 5 mm x 2 ) thick, 20 mm wide cross pvc sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side pvc sheet to be fitted in the m.s. frame welded / sealed to the styles & rails with 7 mm ( 5 mm+2 mm ) thick x 15 mm wide pvc sheet beading on inner side, and joined together with solvent cement adhesive. an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the ‘c’ channel using pvc solvent adhesive etc. complete as per direction of engineer in charge, manufacturer’s specification & drawing. 30 mm thick plain pvc door shutters , mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. , m.s. hold fast for doors and windows , m.s. grill , z section winodws ( openable ) , m.s. angle door chaukhat 40*40*5 , fixing of door, windows / ventilators chaukhats in position. , ( a ) door chaukhats , ( b ) window chaukhats , ( c ) ventilator chaukhats , distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. ( inside walls ) , ground floor , first floor , second floor , finishing walls with two coat of acrylic smooth exterior paint of best quality including supply of all materials labour and tool sand plants etc. required for proper completion of the work. , ground floor , first floor , second floor , finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. ( two coat ) , wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work supply of all materials, labour, tools and plant etc. required for proper completion of the work. ( two coat ) , distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth excludingcost of all materials. ( ceiling ) , providing & applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , supply of 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. , supply of stainless steel sliding door bolts isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with nuts and screws etc complete. ( a ) 250mm x 16mm . , supply of stainless steel towerbolts ( barrel type ) with necessary screws etc. complete , ( a ) 300mm x 10mm , ( b ) 250 mm x 10mm , supply of bright / matt finished stainless steel handles of approved quality & make with necessary screws etc all complete. ( a ) 125 mm , providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a ) applying a slurry coat of neat cement using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer in charge over the rcc slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b ) laying brick bats with mortar using broken bricks / brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge over 20 mm thick layer of cement mortar of mix 1:5 ( 1 cement :5 coarse sand ) admixed with water proofing compound conforming tois : 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c ) after two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge. d ) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement :4 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e ) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer in charge : with average thickness of 120 mm and minimum thickness at khurra as 65 mm. , painting or vanishing two coat on iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour, t & p etc. required for proper completion the work. paint to be used should confirm to the i.s.i. no. 103 1950. , same as item above but on new wood surface. , fixing panes of glass with equal or equivalent i.s.i. marked quality putty, brads and springs including supply of all materials, labour etc. complete. 3.80 to 4.70 mm thick , chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing & excluding supply of all materials complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement :4 coarse sand ) : light shade pigment using white cement. , filling of light cinder filling under floor of toilets & other sunken roofs. , labour charges for wiring points for light with 1.5 sqmm.frlsh pvc insulated single core copper condutor cable in pvc conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.frlsh pvc insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. , same as item no. ( 1 ) but for two way light points. , same as item no. ( 1 ) but for fanandlight duty exhaust fan. , same as item no. ( 1 ) but for5amp plug point with piano type switch and socket etc. , addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. , addition for light / fan points with modular type switchin place of piono type switch. , addition for plugpointswith modular type switchin place of piono type switch. , addition for exhaust fanpointswith modular type switchin place of piono type switch. , wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm fr pvc insulated 1100 v grade single core multistrand copper conductor cable in 20 mm dia heavy duty ( 2mm thick ) pvc conduit complete, including supply of all material, labourand t&p etc. required for proper completion of the work as directed by engineer i / c. , wiring of submain 2 number 4 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. , wiring of submain 2 number 6 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 20mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. , wiring of submain 4 number 10 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia pvc conduitalong with two numbers 6 sqmm frlsh pvc insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects. , wiring of submain 4 number 16 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 40mm dia pvc conduitalong with two numbers 10 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. , wiring of submain 4 number 25 sqmm . frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 50mm dia pvc conduitalong with two numbers 16 sqmm frlsh pvc insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. , fixing and concealing of20mm dia.2mm thick pvc conduit pipe with isi mark embossed and with pvc acessories confirming to is no. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to level with matching colour including cost of material labour and t & p etc required for proper completion of work ( fortelephone ) , erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick g.i. pipe 19mm dia duly painted, complete in all respects. , erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. , fixing of hexagonal / round g.p. fan box of approved make made up of 1.0mm thick isi marked g.p. sheet spot weeldeed four to eight holes of 25.4 mm for pipe entry of the box. holes should be semi shuttered type with 0.5mm g.p. sheet made upper & lower cover duly screewed fitted with 300mm round zink coted m.s bar x 12mm & brand name should be embossed.fixing with wiring conduit laid in the r.c.c roof before concreting alongwith supply of all material, labour, t&p etc. required for proper completion of the work. , supply of ceiling fan with fan motor of a.c permanent insulation, capacitor rating conforming bee 5 star rating and is:374 / 79 and also comply with is: 1709 / 1984 with latest amendment. the rated voltage 220 / 240 volts, 50hz, 1 ph ac the fan assemble should consists of down road blades, shackle canopies etc and with double ball bearing system. bee 5 star rated 1200mm sweep , fixingofelectronic fan regulator ( modular ) 120 280 v. isimarked, on the existing switch board including making connetion, required material, labour t / p etc for proper completion of work to the satisfaction of engineer in charge of work. , fixing of led tube light with metal heavy dutybox type batten light fitting 2 x 22 watt suitable for up to 2 x 22 watt led polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. ( cat: aaa ) , fixing of led tube light with metal heavy dutybox type batten light fitting 1 x 22 watt suitable for up to 1 x 22 watt led polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. ( cat: aaa ) , fixing of recess / surface mounting round 10 to 15 watt, cut out min 125mm, height min 40mm, led down lighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set, suitable for 24hr continuous operation, complete in all respect. ( cat: aaa ) , fixing of single led light wall bracket on matching m.d.f.e.g board base etc. complete in all respect. ( cat: aaa ) , fixing of water tight oblong 10 watt led bulhead luminaire with driverr set confirming to ip 65 and above protection complete in all respect. ( cat: aaa ) , fixing of surface / flush mounting distribution boards with additional metal door withot mcb complete in all respects. ( cat a ) , 4 way tpn , 6 way tpn , 8 way tpn , fixing of 6amp to 32 amp ( 10 ka ) sp mcb in existing mcb, db complete with connections as required. ( cat: a ) , fixing and making connection of following mcbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) , 40 amp. fp mcb ( cat: a ) , 63 amp. fp mcb ( cat: a ) , fixing of surface / flush mounting v tpn distribution boards with additional metal door withot mcb complete in all respects. ( cat a ) 4 way v tpn , fixing and making connection of following mccbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) , 100 amp. fp mccb ( cat: a ) , 125 amp. fp mccb ( cat: a ) , 160 amp. fp mccb ( cat: a ) , fixing and making connection of following mcbs complete in all respects as per direction and satisfaction of engineer in charge. ( cat: a ) , 40 amp. tp mcb ( cat: a ) , 63 amp. tp mcb ( cat: a ) , fixing of power plug with 15a / 250 v flush type switch and 5 pin 15 a / 250v flush type universal socket in suitable m.s. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. , fixing of power plug with 20a / 250 v flush type switch and 5 pin 20 a / 250v flush type universal socket in suitable m.s. box including supply of all material, labor t&p etc. required for proper completion of work. , fixing of single pole mcbs blanking plate complete in all respects. ( cat: a ) , fixing and making connection of following mccbs complete in all respects as per direction and satisfaction of engineer in charge. 63 amp. fp mccb , supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm dia g.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in , laying of 25mmx3mm g.i. strip for earthing purpose as required complete in all respects. , fixing of two number 8 swg g.i. wire in 15mm dia gi pipe for earthing purpose as required complete in all respects. , laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the , 95 sqmm3.5 core , 70 sqmm3.5 core , 50 sqmm3.5 core , 35 sqmm3.5 core , 25 sqmm3.5 core , 10 sqmm4 core , fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per dire , 95 sqmm3.5 core , 70 sqmm3.5 core , 50 sqmm3.5 core , 35 sqmm3.5 core , 25 sqmm3.5 core , 10 sqmm4 core , fixing of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer incharge. , 95 sqmm , 70 sqmm , 50 sqmm , 35 sqmm , 25 sqmm , 16 sqmm , 10 sqmm , 6 sqmm , fixing ofmodular boxes, base & cover plate , fixing of following size / modules, gi box along with modular base& cover plate for modular switches in recess etc as required. 1 or 2 module ( 75mm x 75 mm ) , fixing ofmodular type switch / socket : , fixing of following modular switch / socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. , telephone socket outlet , tv antenna socket outlet , bell push , fixing of call bell / buzzer suitable single phase, 230 v etc as required. , laying oftelephone wire following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel / pvc conduit as required. 2 pair , drawing of co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , drawing telephone wire following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel / pvc conduit as required. , 20 pair , 10 pair , fixing of 10 pair junction boxes for floors and building with krone connectors , with connection and punching of same , fixing of 20 pair junction boxes for floors and building with krone connectors , with connection and punching of same , fixing of 50 pair junction boxes for floors and building with krone connectors , with connection and punching of same , laying unplastisized rigid pvc pipe conforming to is:13592 type a including jointing , cuttingand making good the walls & floors as per requirement. 150mm , supply of ac 230 / 250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep. , fixing of energy meter and other accessories including connections etc. complete as required 3 phase meter , erection of ac 230 / 250 volts, 50 hz wall fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required450mm sweep. , supply of ac 230 / 250 volts, 50 hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required450mm sweep. ( at labs ) , fixing of wired decorative mirror light on suiatable for 9 watt led with lamp complete in all respect. , fixing of factory wired integral led flood light luminaires with die cast aluminium housing built with driver set suitable for 40 to 50 watt conforming to ip 65 / 66 protection complete in all respect. ( cat aaa ) , providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a ) first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg / sqm. this layer will be allowed to air cure for 4 hours. b ) second layer of slurry of cement@ 0.242 kg / sqm mixed with water proofing cement compound @ 0.126 kg / sqm.this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. , fixing of stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, excluding the cost of materials on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. , providing and fixing of expansion joint system related with floor location as per drawings and direction of engineer in charge. the joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per astm b221 02. the system shall be such that it provides floor to floor / floor to wall expansion control system for various vertical localtion in load application areas thatccommodates multi directional seismic movement without stress to its components. system shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. the cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self centering arrangement that freely rotates / moves in all directions.the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. provision of moisture barrier membrane in the joint system to have watertight joint is mandatory requirement all as per the manufactures design and as approved by engineer in charge. ( material shall confirm to astm 6063 ) floor joint of 100 mm gap , providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper astm b221 02. the system shall be such that it provides watertight roof to roof / roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. system shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. the cover plate shall be designed of width and thickness required to satisfy movement , and loading requirements and secured to base members by utilizing manufacturer’s pre engineered self centering arrangement that freely rotates / moves in all directions. the self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including verticalisplacement. the joint system shall resists damage or deterioration from the impact of falling ice, exposure to uv, airborne contaminants and occasional foot traffic from maintenance personnel. provision of moisture barrier membrane in the joint system to have water tight joint is mandatory requirement. ( material shall confirm to astm 6063. ) roof joint of 100 mm gap , providing and fixing of expansion joint systemelated with wall joint ( internal / external ) location as per drawings and direction of engineer in charge. the joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per astm b221 02. the material shall be such that it provides an expansion joints system suitable for vertical wall to wall / wall to corner application, both new and existing construction in office buildings & complexes with no slipping down tendency amongst the components of the joint system. the joint system shall utilize light weight aluminum profiles exhibiting minimalexposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. ( material shall confirm to astm 6063 ) .wall joint of 100 mm gap , fixing in position stainless steel grade 304 plate 1.0 mm thick as per design for expansion joints. 200 mm wide. , granite stone slab 18 mm thick mirror polished quarter rounded with anti skid lines in treads of staircase full length flooring over 20 mm ( average ) thick base laid over and jointed with cement slurry mixed with pigment to match the shade of including rubbing & polishing complete with base of cement mottar 1:4 ( 1 cement : 4 coarse snad ) etc. complete excluding the cost of materials. , ground floor , first floor , second floor , fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, ocking arrangement, stoppers, handles, including applying a priming coat of approved steel primer & excluding the cost of materials. , fixing rolling shutters of approved make of 80 × 125 mm ( 3 × 18 gauge ) cold rolled ml lath inter lockedthrough their eintire length and joined together at the end by locks and mountedon specially designed pipe shaft with brackets and wall bearing & excluding the cost of materials. , 40mm thick cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size and below ) by laid over base concrete finished with floating coat of neat cement ( base concrete to be paid separately ) including fixing of glass strips. ( excluding cost of glass strips ) , fixing glass strips in joints of floors and skirting or dado add the item of laying floors flush with floor level including supply of all materials, labour, t & p etc. required for proper completion the work. ( a ) 37 mm wide and 3.15 mm thick , 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size ) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications.but excluding the cost of materials etc. complete. , supply of 80mm thick rubber moulded cement concrete interlocking pavers block. the compressive strength of concrete pavers blocks shall not be less than 30mpa & 4.5kg / no. , providing and laying of 80mm thick rubber moulded cement concrete interlocking pavers block. the compressive strength of concrete pavers blocks shall not be less than 30mpa & 4.5kg / no. , fixing of angle iron frame 40x40x6 mm in position. , fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres ( minimum ) , between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post ( cost of r.c.c. posts, struts, g.i. barbed wire, earth work and concrete to be paid for separately ) , mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. , providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with 2nd class teak wood beading 62x19 mm. , providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with isi marked m.s. pressed butt hinges bright finished of required size , providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. extra for providing and fixing flush doors with decorative veneering instead of non decorative isi marked flush door shutters conforming to is: 2202 ( part i ) on one side only , p / f curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs etc. wherever necessary complete ( a ) 25 mm dia. , fixing of g.i. pipe ( 80 mm dia ) as per design & drawing as per drection of eic , fabrication of angle iron door chaukhat of 40*40*6 mm , supply of concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m ) , having 50 nos rounds per 6 metrelength, upto 3 m height of wall with existing angle iron ‘y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sq.mm with tape ( 0.52 mm thick ) and weight 43.478 gm / metre. , fixing of concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m ) , having 50 nos rounds per 6 metrelength, upto 3 m height of wall with existing angle iron ‘y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape ( r.b.t. ) / spring core ( 2.5mm thick ) wire of high tensile strength of 165 kg / sq.mm with tape ( 0.52 mm thick ) and weight 43.478 gm / metre ( cost of materialsshall be paid separately ) , supply of m.s. foot rest as per standard design with 20x20mm sq bars. , fixing of m.s. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. , supply ofc.i. tee at the inlet and outlet of septic tank. , fixing c.i. tee at the inlet and outlet of septic tank. , supply of 75mm dia vent pipes. , fixing of 75mm dia vent pipes. , supply of 75mm dia cast iron terminal guard. , fixing of 75mm dia cast iron terminal guard. , supply ofprecast rcc manhole cover and frame of required shape and approved quality. , m.d. 10 circular shape 500mm internal diameter , m.d. 2.5 circular shape 450mm internal diameter , fixing in position precast rcc manhole cover and frame of required shape and approved quality. , m.d. 10 circular shape 500mm internal diameter , m.d. 2.5 circular shape 450mm internal diameter , excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. , up to 1.50 m depth , pipes 80 mm to 300 mmdiameter , 1.50 m to 3.00 m depth , pipes 80 mm to 300 mmdiameter , opentimbering in trenches including shuttering and shoring complete. ( measurement to be taken of the face area timbered ) , depth not exceeding 1.5 meter , depth 1.5 to3.00meter , supply of non pressurenp 2 class ( light duty ) rcc pipe with collars etc. complete. , 150 mm.dia. rccpipes , 250 mm.dia. rccpipes , 100 mm dia rcc pipes , laying of nonpressurenp 2 class ( light duty ) rcc pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 ( 1cement : 2 finesand ) includingtestingof joints etc. complete. , 150 mm.dia. rccpipes , 250 mm.dia. rccpipes , 100 mm dia rcc pipes , laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) upto the haunches of pipes including bed concrete as per standard design , 150 mm.dia. rccpipes , 250 mm.dia. rccpipes , 100 mm dia rcc pipes , constructing brick masonry manhole in cement mortar 1:4 ( 1 cement :4 coarse sand ) rcc top slab with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) , foundation concrete 1:4:8 mix ( 1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size ) finished with a floating coat of neat cement complete as per standard design. , inside size 90x80cms and 45cms deep including ci cover with frame ( light duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15kg ) . , extra for depth for manholes: , inside size 90x120cms and 90cms deep including ci cover with frame ( medium duty ) 455x610mm internal diamensions total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58kg ) . , extra for depth for manholes: , supply of orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per is:10910 on 12 mm dia steel bar conforming to is:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing. , fixing of orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per is:10910 on 12 mm dia steel bar conforming to is:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) complete as per design. , supply of double flanged ( screwed / welded ) centrifugally ( spun ) ductile iron pipes of class k 9 conforming to is 8329 100mm dia ductile iron double flanged , fixing & laying double flanged ( screwed / welded ) centrifugally ( spun ) ductile iron pipes of class k 9 conforming to is 8329 100mm dia ductile iron double flanged , supply of ci specials such as bends, reducers, collars etc. including cartage, loading, unloading, taxes, excise etc. complete. , fixing of ci specials such as bends, reducers, collars etc. including cartage, loading, unloading, taxes, excise etc. complete. , supply of push on joints to centrifugally ( spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket : 100mm dia pipes , fixing of push on joints to centrifugally ( spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket : 100mm dia pipes , supply ofc.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 100mm diameter , fixing of c.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 100mm diameter , supply of c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete ( the tail pieces, tapers etc. if required will be paid separately. a ) 50mm dia , fixing of c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete ( the tail pieces, tapers etc. if required will be paidsaperately 50mm dia , supply of g.i. pipes ( medium ) complete with g.i. fittings , 80mm nominal bore. , 65mm nominal bore. , 50mm nominal bore. , 40mm nominal bore. , 32mm nominal bore. , 25mm nominal bore. , 20mm nominal bore. , 15mm nominal bore. , laying, jointing, testing & commisioning ofg.i. pipes complete with g.i. fittings includingtenching and refilling etc. ( external work ) , 80mm nominal bore. , 65mm nominal bore. , 50mm nominal bore. , 40mm nominal bore. , 32mm nominal bore. , 25mm nominal bore. , 20mm nominal bore. , 15mm nominal bore. , supplying of specials for pressure pipe. , fixing of specials for pressure pipe. , supply ofgate valve ( with cap complete with bolts, nuts, rubber insertion etc. , 80mm nominal bore. , 65mm nominal bore. , 50mm nominal bore. , 40mm nominal bore. , 32mm nominal bore. , 25mm nominal bore. , fixing of gate valve ( with cap complete with bolts, nuts, rubber insertion etc. , 80mm nominal bore. , 65mm nominal bore. , 50mm nominal bore. , 40mm nominal bore. , 32mm nominal bore. , 25mm nominal bore. , constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve, with c.i. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep ( inside ) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i / c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , constructing brick masonry chamber 600 x 600x750mm insidewithf.p.s. brickwork in cement mortar 1:4 ( 1 cement : 4 coarse sand ) for sluice valve / air valve, with c. i. surface box 100 mmtop diameter, 160 mm bottom diameter and 180mm deep ( inside ) with chained lid and rcc top slabwith 1 : 2 : 4 mix ( 1 cement : 2 coarsesand : 4 gradestone aggregate 20 mm nominal size ) ; necessary excavation, foundationconcrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plasteringwithcement mortar 1 : 3 ( 1 cement : 3 coarsesand ) 12mmthick finished with a floatingcoatofneat cementcomplete as per standarddesign , supply offire brigade inlet with 63 mm dia instantaneous inlet complete with all necessary fittings and ms enclosure with glass door made of 18 / 16 swg sheet. 4 way , fixing, installation, testing & commissioning offire brigade inlet with 63 mm dia instantaneous inlet complete with all necessary fittings and ms enclosure with glass door made of 18 / 16 swg sheet. 4 way , supply of sluice valve complete with flanges, gasket, nut bolts 150 mm , fixing, installation, testing & commissioning of sluice valve complete with flanges, gasket, nut bolts 150 mm , supply of nrv complete with flanges, gasket and nut bolts. 150 mm , fixing, installation, testing & commissioning of nrv complete with flanges, gasket and nut bolts. 150 mm , supply of ms pipes conforming to is:1239 ( medium b class ) including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required ( for riser ) , 150 mm dia , 100mm dia , fixing of ms pipes conforming to is:1239 ( medium b class ) including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges etc. welded or screwed joints as required, cutting holes and chases in brick or rcc walls and making good complete. ( for riser ) , 150 mm dia , 100mm dia , supply of manual swing type first aid fire hose reel conforming to is: 444 complete with all other necessary fixing accessories. , fixing, installation, testing and commissioning of manual swing type first aid fire hose reel conforming to is: 444 complete with all other necessary fixing accessories. , supply of fire man axe. , fixing of fire man axe. , supply of singal headed hydrant landing valve comprising of 80 mm dia flanged bend 63 mm dia, with cap and chain conforming to is:5290 ( make : newage / minimax / safex / firex ) , fixing, installation, testing & commissioning of singal headed hydrant landing valve comprising of 80 mm dia flanged bend 63 mm dia, with cap and chain conforming to is:5290 ( make : newage / minimax / safex / firex ) , supply of rrl hose pipe 63 mm dia × 15 mtr. long with gm coupling conforming to is : 636 ( make newage / jayshree / crc ) , fixing, installation, testing & commissioning of rrl hose pipe 63 mm dia × 15 mtr. long with gm coupling conforming to is : 636 ( make newage / jayshree / crc ) , supply of short branch pipe as per is:903 ( make : newage / safex / firex ) , fixing, installation, testing & commissioning of short branch pipe as per is:903 ( make : newage / safex / firex ) , supply of butterfly valve complete with flanges, gasket, nut bolts 100 mm , fixing, installation, testing & commissioning of butterfly valve complete with flanges, gasket, nut bolts 100 mm , supply of hose cabinet box of 18 swg m.s.sheet with glass to accommodate hose reel drum with ruber pipe with nozzle. 2 nos. rrl hose and 1 no. branch pipe with nozzle , fixing, installation, testing & commissioning of hose cabinet box of 18 swg m.s.sheet with glass to accommodate hose reel drum with ruber pipe with nozzle. 2 nos. rrl hose and 1 no. branch pipe with nozzle , supply of air cushion tank ( 2000x1000 ) mm. , fixing, installation, testing & commissioning of air cushion tank ( 2000x1000 ) mm. , supply of air release valve. , fixing, installation, testing & commissioning of air release valve. , supply of nrv complete with flanges, gasket and nut bolts. 100 mm , fixing, installation, testing & commissioning of nrv complete with flanges, gasket and nut bolts. , supply of pressure gauge with gauge cock , fixing, installation, testing & commissioning of pressure gauge with gauge cock , supply of electrical motor driven fire pump suitable for automatic operation consisting of following : ( terrace pump ) ( make : kirloskar / mather+platt ) ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. ( b ) squirrel cage, tefc induction motor suitable for 415 v, 3 phase having ip 55 protection and class b insulation for the above pump and flexible coupling with the pump.the motor shall b rated for continuous duty and shall have hp rating necessary to drive th pump at 150% of its rated discharge at 65% of rated head. © common bed plate of fabricated mild steel channel or cast iron type. ( d ) suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts, anti vibration pads, washers etc. ( e ) pressure switch for automatic operation of motor including necessary wiring upto control panel. ( f ) electrical control panel with starter, 3 pole motor protection category current limiting type mccb, indicating light, ammeter, voltmeter, selector switches, cts protective fuses, single phasing protection, dry suction cut off etc as requrd as per standard details.discharge :450 liter per minute head : 35 meter , installation, testing and commisioning of electrical motor driven fire pump suitable for automatic operation consisting of following : ( terrace pump ) ( make : kirloskar / mather+platt ) ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. ( b ) squirrel cage, tefc induction motor suitable for 415 v, 3 phase having ip 55 protection and class b insulation for the above pump and flexible coupling with the pump.the motor shall b rated for continuous duty and shall have hp rating necessary to drive th pump at 150% of its rated discharge at 65% of rated head. © common bed plate of fabricated mild steel channel or cast iron type. ( d ) suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts, anti vibration pads, washers etc. ( e ) pressure switch for automatic operation of motor including necessary wiring upto control panel. ( f ) electrical control panel with starter, 3 pole motor protection category current limiting type mccb, indicating light, ammeter, voltmeter, selector switches, cts protective fuses, single phasing protection, dry suction cut off etc as requrd as per standard details.discharge :450 liter per minute head : 35 meter , ( a ) horozontally mounted, split casing, centrifugal fire pump complete for delivery of under mentioned discharge against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and farthest outlet at the specified flow cmplete with necessary strainers, pressure gauge including bypass arrangement for periodic testing of the working of the pumpset with required length and size of medium class gi pipe and control valves for proper completion of work.the pump shall be capable of giving 150% of rated discharge at head not less than 65% of rated head.the pump shall be provided with mechanical seals. the impeller shall be enclosed type and accurately blanced dynamically.the pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. , fixing & placing on terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . , supply of halon free portable fire extinguishers as described below: , 4.5 kg carbon dioxide extinguisher, is marked, with high pressure discharge tube, horn, control valve, cce approved cylinder , 6 kg mono ammonium phosphate ( abc ) type cartridge operated extinguishers , 9 kg mono ammonium phosphate ( abc ) type cartridge operated extinguishers , providing, fixing, testing and commissioning of 50 litres ( trolley mounted ) mechanical foam type fire extinguisher. in hp mild steel cylinders isi marked tac approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to is:910 . , providing, fixing, testing and commissioning of co2 type fire extinguisher of capacity 22.5 kg filled with co2 gas as per is 15222 with controll discharge mechanism fitted with hose, horn & trolleyconfirms to is 2878 bearing isi mark. co2 cylinder as per is 7285 , fixing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire extinguishers as described below: , supply of fire related signages printed on photoluminescent u1000 aluminium sheet of 1.0 mm ( + 10% ) containing lumigen ii as base chemical, covered under uv stablized coating and of appropriate size for fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete. , fixing of fire related signages printed on photoluminescent u1000 aluminium sheet of 1.0 mm ( + 10% ) containing lumigen ii as base chemical, covered under uv stablized coating and of appropriate sizeincluding fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by engineer in charge. , supply ofci cover with frame light weight complete as perdesign size 600x600 mm , supply ofci cover with frame light weight complete as perdesign size 900x900 mm , boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in is: 2800 ( part i ) , including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, beyond 90 metre & upto 150 metre depth below ground level.drilling of 250 mm dia bore hole manually. , supply of unplasticized pvc medium well screen ( rms ) pipes with ribs, conforming to is: 12818, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.150 mm nominal size dia , assembling, lowering and fixing in vertical position in bore well unplasticized pvc medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.150 mm nominal size dia , supply of stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , supply of gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , supply of coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of engineer incharge. , filling, spreading & leveling coarse sand, gravels & stone boulders of size range 1.5 mm to 20 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of engineer incharge. , transportation charges of drilling equipment including assembly and other material as required. , drilling of 675 mm. dia by rotary machine , supply of 350 mm. dia housing pipe ( 8 mm. thick ) , laying of 350 mm. dia housing pipe ( 8 mm. thick ) , supply of 200 mm. dia blind pipe ( 8 mm. thick ) , laying of 200 mm. dia blind pipe ( 8 mm. thick ) , supply of 200 mm. dia slotted pipe ( 8 mm. thick ) , laying of 200 mm. dia slotted pipe ( 8 mm. thick ) , supply of 350 mm. dia socket , fixing of 350 mm. dia socket , supply of 200 mm. dia socket , fixing of 200 mm. dia socket , supply of 200 mm. dia bail plug , fixing of 200 mm. dia bail plug , supply of 350 mm. dia well cap , fixing of 350 mm. dia well cap , supply of 350x200 mm. dia reducer. , fixing of 350x200 mm. dia reducer. , supply of 350 mm. dia housing clamp , fixing of 350 mm. dia housing clamp , supply of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of e / i. , filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of e / i. , development by air compressor including transportation. , development by o.p. unit including transportation. , supply of 7.5 hp ksb make submersible pump set model bpd 302 / 4+uami 150 / 6 / 22 203 ( s / d ) suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with ksb electric moter operating of 415 volt suitable for 3 phase 50 cycle a.c. supply of following duty condition 7.5 hp 6 stage pipe.a discharge of water in lpm 860 approx size of discharge outlet in 80 mm.b total head of pump set 45 m. , supply of finolex or equivalent isi marked submersible copper cable of size 2x3x2.5 sq. mm. , fixing of finolex or equivalent isi marked submersible copper cable of size 2x3x2.5 sq. mm. , supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having l&t of qul. male switch fuse unit with hrc fuses, ameter, boltmeter, selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of jyoti or eq. air break star delta motro starter suitable for above submersible pump set. , supply of 80mm dia m.s. column pipe of class c both and socketed with heavy sockets in 3 / 6 meter length and one end flanged complete with interlocking arrangements. , lowering of 80mm dia m.s. column pipe of class c both and socketed with heavy sockets in 3 / 6 meter length and one end flanged complete with interlocking arrangements. , supply of 80mm dia m.s. column pipe clamps with nut, bolts, packing etc. , lowering of 80mm dia m.s. column pipe clamps with nut, bolts, packing etc. , supply of 80mm dia c.i. double flanged isi mark reflex valve of updadhya or equ. make. , fixing ofc.i. double flanged reflex valve , supply of 80mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. , supply of 100 mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. , supply of 150mm dia c.i. double flanged isi mark sluice valve with hand wheel of upadhya or equ. make. , fixing of 80 / 100 / 150 mm dia c.i. double flanged isi mark sluice valve with hand wheel , supply of c.i. double flanged bend of 80mm dia , fixing of c.i. double flanged bend of 80mm dia i / c cost of labour. , supply of 80mm dia c.i. tee heavy quality i / c cost of material. , fixing of 80mm dia c.i. tee heavy quality , supply of guru / fibing or equivalent make pressure gauge. , fixing of pressure gauge. , erection & commissioning of pumping plants complete along with electric wiring. , supply of steel wire rope of 1 / 2 size , fixing of steel wire rope of 1 / 2 size , s / b of 600mm x 600 mm x 6.0 mm g.i. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia g.i. pipe and funnel for watering and one earthing lead on one no. 8 to 10 swg gi wite in 15mm dia g.i. pipe up to switch board ( from appron to switch board the cost of g.i. , pipe and g.i. wire will be extra ) 30 cm square c.i. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of e / i complete in all respects as per drawing. , s / f of one number 8 to 6 swg g.i. wire in 15mm dia g.i. pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. t&p other material required for proper completion of the work as directed at site. , s / f of aluminium conductor pvc insulated armoured, served, sheathed cable 1100 volts grade16 sqmm x 4 core , fixing of aluminium conductor pvc insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mmbelow ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top.on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by e / i complete in all respects the armoring of the cable shall be properly connected with the earth conductor by clamps etc.16 sqmm x 4 core , supply of 500 kva. 11 / 0.433 kv, 3phase, 50hz, dyn 11, oil type, ( uppcl approved make ) copper wound transformer with off load tap changing arrangement on hv side in steps of + / 2.50%, + / 5% & 7.5% , having cable end boxes on hv sideand 800 amp. bus trunking arrangement on lv side complete with all accessories i / c first filling of filtered dehydrated oil and confirming to is 2026 ( part 1 to part 5 ) & as per specification attached complete in all respects as required at site. , installation, testing and commissioning of 500 kva. 11 / 0.433 kv, 3phase, 50hz, dyn 11, oil type, ( uppcl approved make ) copper wound transformer with off load tap changing arrangement on hv side in steps of + / 2.50%, + / 5% & 7.5% , having cable end boxes on hv sideand 800 amp. bus trunking arrangement on lv side complete with all accessories i / c first filling of filtered dehydrated oil and confirming to is 2026 ( part 1 to part 5 ) & as per specification attached complete in all respects as required at site. , supply of 3 core standered aluminium conduktor xlpe ( cross linked polyethylene ) insulated pvc bedded, galvanised flat steel strip armoured cables confirming to i.s. 7098 ( part ii with latest amendments ) 11 kv grade 150sq. mm 3 core , laying of 3 core standered aluminium conduktor xlpe ( cross linked polyethylene ) insulated pvc bedded, galvanised flat steel strip armoured cables confirming to i.s. 7098 ( part ii with latest amendments ) 11 kv grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. thearmouring of cable shall be properly connected with earth condutor by clamps etc.150sq. mm 3 core , supply of 3 core 240sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. , making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. , making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240 sq.mm. xlpe aluminium conductor cable of 11 kv grage as required. , supply and burying of 40mm dia x 4.5 metres long g.i. pipe vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of no. 6 to 8 swg gi wire in g.i. pipe up to appron ( and from appron to switch board the cost of g.i. wire and pipe will be extra ) upto switch board, 30cm square c.i. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150mm thick alround etc. as per directions of engineer in charge complete in all respects as per drawing. , supply and burying of 600mm x 600 mmx6mm g.i. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm g.i.pipe and funnel for watering and two earthing leads of no.8to10swg g.i.wire in 15mm diag.i. pipe upto switch board ( from apron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm. square c.i. frame with hinged cover, masonary housing, alternate layers / of charcoal / coke and salt at least 150mm thick alround etc. complete in all respects. , supply and burying of 600mm x 600mm x 3 mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia g.i pipe and funnel for watering and one earthing lead ofone no. 8swg copper wire in 15 mm dia g.i pipe up to switch board ( from appron to switch board the cost of g.i pipe and copper wire will be extra ) 30 cm square c.i frame with hinged cover masonry housingalternate layers of charcoal / coke and salt atleast 150mm thick alround etc. as per directions of engineer in charge complete in all respects. , supply and laying of 32mm x 6mm g.i. strip from earth electrode directly in the ground as required complete in all respects. , supply and laying of 32mm x 6 mm copper strip from earth electrode directly in the ground as required complete in all respects.. , supply and laying of 25mm x 3mm g.i. strip from earth electrode directly in the ground as required complete in all respects. , supply and fixing of one number 8 swg g.i wire in 15mm dia. g.i pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, t&p other material required for proper completion of the work as directed at site. , supply of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade , 300 sqmm3.5 core , 185 sqmm3.5 core , 150 sqmm3.5 core , 35 sqmm3.5 core , 25 sqmm3.5 core , 16 sqmm4 core , 10 sqmm4 core , 16 sqmm2 core , 10 sqmm2 core , 6 sqmm2 core , laying of aluminium conducter, pvc insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on m.s. clamps etc. of suitable size. from 6 sqmm 2 core to 300 sqmm3.5 core , supply of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete , 300 sqmm3.5 core , 185 sqmm3.5 core , 150 sqmm3.5 core , 35 sqmm3.5 core , 25 sqmm3.5 core , 16 sqmm4 core , 10 sqmm4 core , 16 sqmm2 core , 10 sqmm2 core , 6 sqmm2 core , fixing of brass nickle plated compression gland for pvc insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. the armouring of the cable shall be properly connected with the earth as per direction of eic. from 6 sqmm 2 core to 300 sqmm3.5 core , supply of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape , 300 sqmm , 185 sqmm , 150 sqmm , 95 sqmm , 70 sqmm , 35 sqmm , 25 sqmm , 16 sqmm , 10 sqmm , 6 sqmm , 4 sqmm , fixing of palm / pin type copper tin plated cables sockets ( lugs ) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of engineer incharge. from 4 sqmmto 300 sqmm , supply of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130 mm and base plate 12 mm thik ) having 3mm thikness with single arm bracket ( 1 mtr length ) including the cost of foundation bolts, required t&p complete in all respect. , fixing of 7 mtr gi octagonal pole of approved make ( top dia 70mm, bottom dia 130 mm and base plate 12 mm thik ) having 3mm thikness with single arm bracket ( 1 mtr length ) on rcc foundation including the cost of foundation, foundation bolts, excavation & back filling and required t&p complete in all respect. , supply of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66 and above protection complete in all respect. , fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. confirming to ip 66 and above protection complete in all respect. , supply of 6 amp to 32 amp dp mcb ( 10ka ) ( c curve ) for poles , fixing of 6 amp to 32 amp dp mcb ( 10ka ) ( c curve ) for poles , supply of decorative 40 to 45 watt led post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming to ip 65 and above protection complete in all respect. , fixing of decorative 40 to 45 watt led post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set confirming to ip 65 and above protection complete in all respect. , supply offollowing capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contractors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn complete in all respect.25 amp spn , fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contractors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn complete in all respect.25 amp spn , supply of bakelite sheet 3 mm thick of suitable size & connector , fixing of bakelite sheet 3 mm thick of suitable size & connector , supply of m.s. pipe ( class b is : 1239 ) pole suitable for fixing 70 watt. hpsv post top including 4 pole cable junction box with 5 amp. rewireablefuse fitting and 5 amp. switch on laminated cover and m.s. box complete with water tight cover and 450x450x450mm base above ground and 2x4sqmm aluminium wire from cable box to lamp for connection including painting the pole on primer coats and necessary reducers on thetop of pole for fixing of post top lantern. 65mm dia 4m long ( 3m above ground and 1 m below ground ) . , fixing of m.s. pipe ( class b is : 1239 ) pole suitable for fixing 70 watt. hpsv post top including 4 pole cable junction box with 5 amp. rewireablefuse fitting and 5 amp. switch on laminated cover and m.s. box complete with water tight cover includingmasonary / pcc ( 1:3:6 ) work for erecting the pole and 450x450x450mm base above ground and 2x4sqmm aluminium wire from cable box to lamp for connection including painting the poleby an approved shade on primer coats and necessary reducers on thetop of pole for fixing of post top lantern.the work shall be complete as required up to the satisfaction of engg. in charge.65mm dia 4m long ( 3m above ground and 1 m below ground ) . , making of following size of cable chamber made of 230 mm thick brick work in cement mortar ( 1 cement : 6 sand ) with pcc 100 mm thick pcc base plastering of inner and outer surface with cement mortar including providing of heavy duty c.i cover complete with digging, refilling and removal of surplus soil complete as required. material cost will be paid saperately.900 mm x 900 mmx 1000 mm deep , supply of mv danger notice plate of 200 mm x 150 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. , supply of ht danger notice plate 250 mm x 200 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. , fixing of mv / ht danger notice plate 250 mm x 200 mm made of mild steel at least 2mmthick &vitreousenamelledwhiteon bothsides and withinscription insignalred colouronfront side as required. , supplying of fire buckets, round bottom made of g.i. sheet 9 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of engineer in charge. , fixing of fire buckets, round bottom made of g.i. sheet 9 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of engineer in charge. , supply of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality , layingof 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality , supply of danger board fabricated from 10 gauge ms sheet as per ie rules , fixing of danger board fabricated from 10 gauge ms sheet as per ie rules , supply of shock treatment chart ( prescribed under i.e.rules ) duly framed with glass and supported from back with hard board or soft board. , fixing of shock treatment chart ( prescribed under i.e.rules ) duly framed with glass and supported from back with hard board or soft board with supply of all labour t & pfor proper completion of work. , supply of fire extinguishers, abc type 4.00 kg. capacity ( isi marked is : 15683 & tac approved ) complete with initial charges and wall bracket, , supply of co2 typefire extinguishers, 4.50 kg. capacity ( isi marked is : 2878 & tac approved ) complete with initial charges and wall bracket, , fixing of fire extinguishers, abc type 4.00 kg. & co2 type 4.5 kg. capacity complete with initial charges and wall bracket, along with supply of all labour for proper completion of work. , supply of water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests , fixing of water closet squatting pan ( indian type w.c. pan ) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) conforming to is:7231, parryware / hindware / seabird / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests , supply of white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) , conforming to is : 7231, parryware / hindware / seabrid / orient ( coral ) with all fittings and fixtures complete.w.c. pan with isi marked black solid plastic seat and lid , fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern with manually controlled device ( handle lever ) , conforming to is : 7231, parryware / hindware / seabrid / orient ( coral ) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : w.c. pan with isi marked black solid plastic seat and lid , supply of white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. , fixing of white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. , supply of white vitreous china wash basin with c.i. brackets painted white, 15 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standerd pattern. , a ) white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps , b ) white vitreous china surgeon type wash basin of size 660x460 mm with single 15 mm c.p. brass pillar taps with elbow operated levers isi marked , fixing of white vitreous china wash basin with c.i. brackets painted white, 15 mm c.p. brass pillar taps, c.p. brass chain with rubber plug, 32mm c.p. brass waste of standerd pattern including cutting & making good the walls wherever required. , a ) white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps , b ) white vitreous china surgeon type wash basin of size 660x460 mm with single 15 mm c.p. brass pillar taps with elbow operated levers isi marked , supply of p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. , semi rigid pipe , 32 mm dia , 40 mm dia , fixing of p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. , semi rigid pipe , 32 mm dia , 40 mm dia , supply of 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. , fixing of 600x450mm bevelled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. , supply of stainless steel aisi 304 ( 18 / 8 ) kitchen sink as per is : 13983 with c.i. brackets and stainless steel plug 40mm including painting of fittings and brackets, kitchen sink with drain board size 510x1040 mm bowl depth 250mm , fixing of stainless steel aisi 304 ( 18 / 8 ) kitchen sink as per is : 13983 with c.i. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.kitchen sink with drain board size 510x1040 mm bowl depth 250mm , supply of white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings. , range of three half stall urinals with 10 litre pv.c. automatic flushing cistern. , range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. , range of single half stall urinals with 5 litre pv.c. automatic flushing cistern. , fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps ( all in d.p. brass ) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass including painting of fittings and cutting and making good the walls and floors wherever required: , range of three half stall urinals with 10 litre pv.c. automatic flushing cistern. , range of two half stall urinals with 5 litre pv.c. automatic flushing cistern. , range of single half stall urinals with 5 litre pv.c. automatic flushing cistern. , fixing of stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 ( 1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size ) as per direction of engineer in charge and finished smooth.granite stone of approved shade , supply of unplasticised pvc connection pipe with brass unions , 45 cm length , 15 mm nominal bore , fixing of unplasticised pvc connection pipe with brass unions , 45 cm length , 15 mm nominal bore , supply of c.p. brass bib cock of approved quality conforming to is:8931 a ) 15 mm nominal bore , fixing of c.p. brass bib cock of approved quality conforming to is:8931v a ) 15 mm nominal bore , supply of c.p. brass long body bib cock of approved quality conforming to is standards andweighing not less than 690 gms.a ) 15 mm nominal bore , fixing of c.p. brass long body bib cock of approved quality conforming to is standards andweighing not less than 690 gms.a ) 15 mm nominal bore , supply of c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is:8931a ) 15 mm nominal bore , fixing of c.p. brass angle valve for basin mixer and gyser points of approved quality conforming to is:8931a ) 15 mm nominal bore , supply of c.p. brass shower rose with 15 or 20mm inlet 150 mm diameter , fixing of c.p. brass shower rose with 15 or 20mm inlet150 mm diameter , supply of c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is:8931: 150 mm diameter , fixing of c.p. brass stop cock ( concealed ) of standard design and of approved make conforming to is:8931: 150 mm diameter , supply of ptmt bottle trap for wash basin and sink.bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms , fixing of ptmt bottle trap for wash basin and sink.bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms , supply of ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , fixing of ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , supply of ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms , fixing of ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms , supply of unplasticised pvc pipe clips of approved design to unplasticised pvc pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws , 110mm , 90mm , fixing of unplasticised pvc pipe clips of approved design to unplasticised pvc pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete. , 110mm , 90mm , laying of cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size ) around p.v.c soil and waste pipe including bed concrete as per standard design ( embedded in the flooring / ground ) , 100 / 75 mm dia , supply of wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a110 mm , fixing on wall face unplasticised rigid pvc rain water pipes conforming to is: 13592 type a including jointing with seal ring conforming to is: 5382 leaving 10mm gap for thermal expansion. 110 mm , supply of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592. , bend 87.5 degree , 110 mm bend , shoe ( plain ) 110 mm shoe , fixing of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is:13592type a including jointing with seal ring conforming to is:5382 leaving 10mm gap for thermal expansion. , bend 87.5 degree , 110 mm bend , shoe ( plain ) 110 mm shoe , supply of inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. , fixing of the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. , supply of unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length. 110 mm , fixing of unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with ms screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand ) and making good the wall etc. complete.110 mm , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over pvc sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. , supply of chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing. , 20mm dia nominal outer dia pipes , 25mm dia nominal outer dia pipes , 32mm dia nominal outer dia pipes , fixing of chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i / c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge. , concealed work including cutting chases and making good the walls etc. , 20mm dia nominal outer dia pipes , 25mm dia nominal outer dia pipes , 32mm dia nominal outer dia pipes , supply of gi pipes complete with gi fittings and clamps. , 15mm dianominal bore , 20mm dianominal bore , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , fixing of gi pipes complete with gi fittings and clamps, including cutting and making good walls etc. ( internal work ) . internal work exposed on wall , 15mm dianominal bore , 20mm dianominal bore , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , painting of gi pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approved quality for new work. , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , supply of gi union in gi pipes , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , fixing of gi union in gi pipes including cutting and threading the pipe and making long screws etc. complete ( new work ) . , 15mm dia nominal bore , 20mm dia nominal bore , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , supply of gun metal gate valve with wheel of approved quality. , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , fixing of gun metal gate valve with wheel of approved quality. , 25mm dia nominal bore , 32mm dia nominal bore , 40mm dia nominal bore , 50mm dia nominal bore , 65mm dia nominal bore , supply of brass stop cock of approved quality. , b ) 20 mm nominal bore , fixing of brass stop cock of approved quality. , b ) 20 mm nominal bore , supply of terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . , fixing & placing of terrace ( at all floor levels ) polyethylene water storage tank isi : 12701 marked indicating the bis license no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [ sintex, electroplast, star, lotus or equivalent having valid isi license ] . , supply of glazed stoneware pipes grade a100mm dia sw pipe , laying and jointing glazed stoneware pipes grade a with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete.100mm dia sw pipe , laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) all rounds.w. pipes including bed concrete as per standard design 100mm dia sw pipe , supply of square mouth s.w. gully trap grade‘a’ complete with c.i. grating, water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size p type , fixing of square mouth s.w. gully trap grade‘a’ complete with c.i. grating, brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size ( inside ) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design150 x 100 mm size p type , supply of floor and wall face ringfit upvc astral ultradrain conventional system for soil and waste water pipes conforming to ( hsn code: 3917 ) type b ( i ) double socketed pipes. , a ) 110mm dia p.v.c. pipe , b ) 90mm dia p.v.c. pipe , fixing of floor and wall face ringfit upvc astral ultradrain conventional system for soil and waste water pipes conforming to ( hsn code: 3917 ) type b including jointing with seal ring. ( i ) double socketed pipes. , a ) 110mm dia p.v.c. pipe , b ) 90mm dia p.v.c. pipe , supply of upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 90mm , fixing of upvc floor trap of self cleansing designwith cp jalicomplete in all respects. ( make : supreme / finolex / prince ) p trap type floor trap 110 x 90mm , supply of clean out plug ( astral ) , fixing of clean out plug ( astral ) , supply ofterminal guard. , a ) 110mm , b ) 90mm , fixing of terminal guard. , a ) 110mm , b ) 90mm , supply of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes. , 110mm bend , 90 mm bend , 110mm coupler , 90mmcoupler , 110x110x110 mm single tee with door , 90x90x90 mm single tee with door , fixing of wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. , 110mm bend , 90 mm bend , 110mm coupler , 90mmcoupler , 110x110x110 mm single tee with door , 90x90x90 mm single tee with door , supply of 1.50 sqmm frlsh pvc insulated single core copper conductor cable , supply of 2.50 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of 4.00 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of 6.00 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of 10 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of 16 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of 25 sqmm frlsh pvc insulated 1100 v single core multistrand copper conductor cable , supply of hexagonal / round gp fan box of approved make made up of 1 mm thick isi marked gp sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box duly screewed fitted with 300 mm round zink coated ms bar x 12 mm. , supply of ceiling fan with fan motor of ac permanent insulation, capacitor rating conforming to bee 5 star. the ratrd voltage220 / 240 volts, 50 hz, single phase, ac the fan assemble should consists of down road blades, shackle canopies with double ball bearing system – 1200 mm sweep , supply of electronic fan regulator ( modular ) 120 280 v isi marked , supply of led tube light with metal heavy duty box type batten light fitting 2x 22 watt suitable for 2x22 watt polycarbonate tube light including tube etc suitable for both surface. , supply of led tube light with metal heavy duty box type batten light fitting 1x 22 watt suitable for 1x22 watt polycarbonate tube light including tube etc suitable for both surface. , supply of recess / surface mounting round 10 to 15 watt, cut out 125 mm, height min 40 mm, led downlighter having powder coated die cast aluminium housing with heat sink, diffuser / reflector and driver set, suitable for 24 hr continuousoperation , supply of single led light wall bracket on matching mdfeg board base , water tight oblong 10 watt led bulkhead luminery with driver set conforming to ip 65 and above protection complete. , supply of surface / flush mounting distribution boards with additional metal door without mcb complete. ( cat a ) , 4 way tpn , 6 way tpn , 8 way tpn , supply of 6 amp to 32 amp ( 10 ka ) sp mcb ( cat a ) , supply of following mcbs , 40 amp. fp mcb ( cat a ) , 63 amp. fp mcb ( cat a ) , 40 amp. tp mcb ( cat a ) , 63 amp. tp mcb ( cat a ) , supply of surface / flush mounting v tpn distribution boards with additional metal door without mcb complete. 4 way v tpn , supply of following mccbs , 63 amp. fp mccb ( cat a ) , 100 amp. fp mccb ( cat a ) , 125 amp. fp mccb ( cat a ) , 160 amp. fp mccb ( cat a ) , supply of power plug with 15 a / 250 v flush type switch and 5 pin 15 a / 250 v flush type universal socket in suitable ms box 175mmx100mmx50mm size ( modular ) , supply of single pole mcbs blanking plate complete , supply of gi plate for earthing size 600 mm x 600mm x 6 mm , supply of gi pipe 20 mm dia , supply of gi wire 8 to 10 swg , supply of ci frame ( 30 sqcm ) with hinged cover , supply of gi strip for earthing purpose 25 mmx 3 mm , supply of aluminium conductor pvc insulated armoured, served, sheeted cable 1000 volts , 95 sqmm 3.5 core , 70 sqmm 3.5 core , 50 sqmm 3.5 core , 35 sqmm 3.5 core , 25 sqmm 3.5 core , 10 sqmm 4 core , supply of brass nickle plated compression gland for pvc insulated and armoured served sheeted underground cable including rubber ring , 95 sqmm 3.5 core , 70 sqmm 3.5 core , 50 sqmm 3.5 core , 35 sqmm 3.5 core , 25 sqmm 3.5 core , 10 sqmm 4 core , supply of palm / pin type copper tin plated cable sockets ( lugs ) to the cable leads, insulating with tape , 95 sqmm , 70 sqmm , 50 sqmm , 35 sqmm , 25 sqmm , 16 sqmm , 10 sqmm , 6 sqmm , supply of gi box alonwith modular base and cover plate for modular switches in recess1 or 2 module ( 75 mmx75 mm ) , supply of telephone socket outlet ( modular ) , supply of tv antenna socket outlet ( modular ) , supply of bell push ( modular ) , supply of call bell / buzzer suitable single phase 230 v , supply of telephone cable following pair 0.5 sqmm fr pvc insulated annealed copper conductor, unarmoured , 2 pair , 10 pair , 20 pair , supply of co axial tv cable rg 6 grade 0.7 mm solid copper conductor pe insulated sheeted with fine tinned copper braid and protected with pvc sheet , supply of 10 pair junction boxes for floors and building with krone connectors , supply of 20 pair junction boxes for floors and building with krone connectors , supply of 50 pair junction boxes for floors and building with krone connectors , supply of exhaust fan of ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories.300 mm sweep , supply of energy meter ( 3 phase ) and other accessories. , supply of wall fanof ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories. 450 mm sweep , supply of exhaust fan of ac 230 / 250 v, 50 hz including nuts & bolts, mounting frame and other accessories.450 mm sweep , supply of weired decorative mirror light suitable 9 watt led with lamp complete , supply of factory weired integral led flood light luminaries with die cast aluminium housing built with driver set suitable for 40 to 50 watt confoming to ip 65 / 66 protection complete. , supply of swiches ( modular ) 5 amp , supply of sockets ( modular ) 5 amp , supply of pvc conduit pipe 25 mm dia , supply of round sheet , supply of ceiling rose , supply of holder for bulbs , fixing of main lt panel , fixing of main em panel , fixing of sub panel , fixing of sub em panel , fixing of capacitor panel 150kvar , fixing of feeder piller , fixing of street feeder piller , supply of coarse sand , supply of cement50 kg , supply of brick m150 , supply of stone grit 20 mm , supply of stone ballast 40 mm , supply of tor steel 8 mm dia , supply of tor steel 10 mm dia , supply of tor steel 12 mm dia , supply of tor steel 16 mm dia , supply of tor steel 20 mm dia , supply of tor steel 25 mm dia , supply of ms fabrication for door window and ventilator , supply of water proofing chemical cico tapecrete p151 , supply of y shaped angle iron post 40x40x6 , supply of kota stone 22 mm thick , supply of vitriried floor tile 8 to 10 mm thick in 600x600 mm size , supply of wall tile glazed / ceramic floor tiles , supply of ss railing 304 grade , supply of ms collapsible channel , supply of rolling shutter with ball bearing , supply of granite , supply of cinder , supply ofchequred tile 300x300 mm size , supply of ms gate made of ms hollow sections , supply of interlocking pavers 80 mm m30 mpa , labour charge for construction of rcc over head tankas per design and drawing &directions of engineer in charge....

Uttar Pradesh Power Transmission Corporation Limited - Uttar Pradesh

37914886 construction of 132 kv / 33kv bay of 63 mva transformer and complete erection and commissioning of 63 mva transformer at 220 kv s / s rania under etd i kanpur 1 erection of following equipment / structure as per instruction manual and technical specification including shifting of material up to site of work including all associated work to complete the job. 2 erection of main and auxiliary structure including minor fabrication & shifting 3 erection of 145 kv sf 6 circuit breaker 4 erection of 145 kv bus isolator ( moterised ) with pi 5 erection of 145 kv tendom isolator ( moterised ) with pi 6 erection of 145 kv current transformer with jn box 7 erection of145 kvpost insulator 8 erection of 120 kv lighting arrester 9 erection of 33 kv vaccum circuit breaker 10 erection of 30 kv lighting arrester 11 erection of 33 kv ct with jn box 12 erection of 33 kv bus isolator 13 baywise jumpering &interconnection of 63 mva t / f bay including all jumpering of all equipment with specified cond. ( zebra ) 14 erection of 132 kv / 33 kv 63 mva t / f control and relay panel as per technical specification ( sas type ) 15 laying of optical fiber for sas system as per technical specification ( material provided by contractor ) 16 63 mva t / f bay ( hv &lv ) integration in the existing ziv scada system and its real time data validation to sldclucknow also icd and cid file configuration of the relay 17 layingandof following size copper control cable in cable trench from different control room equipment to control pannel as cable schedule including carriage of cable drum from store to site 18 2cx2.5 sqmm 19 4cx2.5 sqmm 20 6cx2.5 sqmm 21 10cx2.5 sqmm 22 termination & connection of all size cable as per cable schedule including dressing of control cable making neccesary holes in plate as per requirment supply and fixing cable gland , lugs of require size , ferruls and termination with all associated work 23 earthing of equipment with different size ms flat provided by upptcl including trench 24 75x10mm ms flat 25 50x6 mm flat 26 25x6 mm flat 27 earthing oflas by making rectangular deltaconsisting of 3 mtr long electrode which is to be febricated and piercing inside the ground and connecting all the electrode with 75x10 mm ms flat 750 mm below the ground level including excavation back filling level of earth 28 painting of ms flat 75x10 mm, 50x6 mm, 25x6mm by one coat red oxide and two coat bus cream colour eniamel paint after cleaning the ms flat 29 switch yard lighting 30 providing and fitting of new generation energy & environment friendly long aluminium outdoor beam street light with high power 120 watt leds as light source & exclusively designed polycarbonate cover along with double door type junction boxcomplete fitting suitable for 230 volt ac input supply of cgl / havells / surya / philips / bajaj etc including wiring from junction box to light fitting point and checking of healthiness of leds light. 31 modification of various type sub station structure by cutting and drilling of holes with welding work etc as per site requirement 32 providing & fixing of 63 mva t / f name plate of 2 mm thick alluminium sheet plate size 400x200 mm with covering retro reflecting sheet base yellow colour and write feeder name plate per equipment 33 other works ( re installation & shifting of33 kvcapacitor unit 2x5 mvar ) 34 dismentalling of 33 kvbus ( ryb ) which is connect to 33 kv capacitor unit having conductor taramtulla lenth 15 meter , 33 kv capacitor unit ( 2x5 mvar ) . the jobinclude , mains and auxiliary structure, 36 kv vcb, ct ( 03 nos ) , bus isolator ( 03 nos ) capacitor cell , 33 kv nct, lighting equipment, acdb, after disconnection and removing of all existing, power cable control cable, jumpers etc. from different equipment to capacitor pannel, acdb. work also including rolling the dismentalled control cable from trench and shifting it from site to store as per s / s incharge 35 shifting of 33 kv capacitor unit ( 2x5 mvar ) . the jobinclude , 36 kv vcb, ct ( 03 nos ) , bus isolator ( 03 nos ) capacitor cell , 33 kv nct, lighting equipment , reactor, shifting of main and auxiliary structure, acdb , fittings upto 100 mtr 36 erection of existing 33 kv capacitor unit ( 2x5 mvar ) . the jobinclude , 36 kv vcb, ct ( 03 nos ) , bus isolator ( 03 nos ) capacitor cell , 33 kv nct, lighting equipment , reactor, mainsand auxiliary structure, acdb and reconnection termination same as before with new gland , lugs , feruls, dressing etc 37 stringingof 33 kvbus ( ryb ) which is connect to 33 kv capacitor unit having conductor taramtulla lenth 15 meter same as before as per direction of s / s incharge 38 interconnection of 33 kv capacitor unit ( 2x5 mvar ) including all jumpering of all equipment with specified cond. ( panther ) 39 laying of following size copper control cable in cable trench for different control room equipment to control pannel, yard equipmentas cable schedule including carriage of cable drum from store to site 40 2cx2.5 sqmm 41 4cx2.5 sqmm 42 6cx2.5 sqmm 43 termination & connection ofof following size cable as per cable schedule including dressing of control cable making neccesary holes in plate as per requirment supply and fixing cable gland of require size , ferruls and termination with all associated work 44 earthing of equipmentand structure with different size ms flat provided by upptcl including trench 45 50x6 mm flat 46 25x6 mm flat 47 painting of ms flat 50x6 mm, 25x6mm by one coat red oxide and two coat bus cream colour eniamel paint after cleaning the ms flat 48 63 mva t / f erection and commissioning work 49 shifting of main tank of 63 mva t / f from unloading point to t / f plinth ( up to 20 mtr ) 50 additional shifting of 5 meter or part there of ( 63 mva t / f main tank ) 51 complete erection of 63 mva by erection of radiators conservator tank hv / lv / n bushing and its turrets, connecting all pipe line , erection of fans, control cable , motor drive mechanism of rtcc pannel, cooling fan etc and all other associated work for satisfactorly completeion of work . 52 filling of transformer oil from oil drum to main tank of 63 mva t / f 53 filling of transformer oil from oil drum to main tank of 63 mva t / f and centrifusing of complete transformer oil in main tank of the transformer taking the ir / bdv value of transformer oil at an interval of 4 hrs as per norms till the desire value of bdv / ppm are obtained ( centrifusing machine along with operator shall be arranged by the contractor at his own cost ) 54 erection of rtcc pannel of 63 mva t / f as per instruction of s / s incharge. the job include its fitting , cutting of its pocket etc. 55 termination of cable connection in cooling fans / rtcc / marshallingbox including re dressing / ferruling etc as per drawing 56 earthing of 63 mva 132 / 33 kv transformer body , mb, oltc / rtcc with ms flat to be provided by thedepartment and connecting the same with main earth mat at 2 places as required 57 making delta earthingrectangular with 03 mtr long electrode which to be provided by department and connecting with neutralof 63 mva t / f and green bus painting of ms flat size 75x10 mm ( each for hv, lv, neutral 58 testing of transformer oil after centrifusing through cpri lab along with carriage of sample for bdv, ppm...

Indian Army - Uttar Pradesh

37893031 bids are invited for boq bid polythene film .05 mm , polythene film .18 mm , polythene film .25 mm , polythene film 0.08 mm , polythene film0.12 mm thick , steel sheet carbon , steel sheet carbon galvanised , acid , aluminium sheet hard 1.22 mm , aluminium sheet hard 1.63 mm , aluminium sheet soft 1.63 mm , cloth bunting navy blue , cloth dasooti cotton blue total quantity : 2059...

Northern Railway - Uttar Pradesh

37881455 auction sale of scrap lavatory doors, compartment door, way door with or without attachment of ss ferrous mica, plastic, rubber, etc out of which some way door, compartment door, of ac coaches having with or without attachment of aluminium sheet fully or partially fitted on surface of door. note:lbp location: across traversor near boundary wall...

Indian Army - Uttar Pradesh

37826982 bids are invited for boq g1 5315 000649 nails steel lath cut 1 6mm x 4 8mm x 10 mm , boq f1 4930 000018 oiler hand lubricating with spout 250 ml , boq g2 9535 000016 aluminium sheet half hard 4 60mm , boq g2 3439 000093 rod welding steel mild 5 00mm , boq g2 3439 000071 electrode cutting solid 4 00mm total quantity : 4656...

Indian Army - Uttar Pradesh

37752582 bids are invited for boq of ord items ca 8310 000025 s cotton thread 100 dtex x 6 og 50m , ca 8310 000026 s cotton thread 100 dtex x 6 og 500m , ca 8310 000030 s cotton thread 100 dtex x 6 white 50m , ca 8310 000040 s cotton thread 165 dtex x 6 khaki 500m , ca 8310 000045 s cotton thread 165 dtex x 6 og 1000m , ca 8310 000060 s cotton thread 270 dtex x 9 black 500m , ca 8310 000064 s cotton thread 270 dtex x 9 og 500m , ca 8310 000072 s cotton thread 590 dtex x3 white 500m , ca 8310 000073 sewing cotton thread 590 dtex x 3 white 1000 , ca 8315 000204 needle daring tailor 47 mm , ca 8315 000206 needle tailor darning 65mm x 1.4 mm , g1 5315 000072 pins cotter split steel 2.5 mm x16 mm , g1 5315 000075 pins cotter split steel 2.5mm x 40mm , g1 5315 000167 pin cotter split steel 4.00mm x 56 mm , g1 5315 000625 nail brad steel cut 12mm x 1.25mm , g1 5315 000627 nail brad steel cut 25mm x 1.50mm , g1 5315 000655 nails steel wire round 30mm x 2 mm , g1 5315 000656 nails steel wire round 40 mm x 2 mm , g1 5315 000659 nails steel wire round 50mm x 2.5mm , g1 5315 000662 nails steel wire round 75mm x 3.15mm , g1 5315 000665 nails steel wire round 125 mm x 5.6mm , g1 5315 000666 nails steel wire round 150 mm x 6.3mm , g1 5315 000817 nails steel wire round 50mm x 2.8mm , g1 5315 000818 nails steel wire round 50mm x 3.15mm , g1 5315 000821 nails steel wire round 70mm x 2.8mm , g2 9505 000003 wire steel mild bright 4.00mm , g2 9505 000009 wire steel mild annealed 1.60mm , g2 9505 000012 wire steel mild annealed 1.00mm , g2 9505 000059 wire steel mild galvanised 0.56mm , g1 5340 000903 hinges steel butt 50m , g1 5340 000942 hinges steel tee 450mm , y3 6145 005958 cable electrical htp13 1a , g2 9530 000125 aluminium bar round 12.5mm , g2 9535 000004 aluminium sheet hard 1.22mm 1 24 total quantity : 1033...

Kisan Sahkari Chini Mills Limited - Uttar Pradesh

37750028 f.o.r. supply of hardware, tools and tackles, nut bolts, cast steel etc. , supply of hardware , cotton waste ( white ) , cotton waste ( coloured ) , emery cloth rough ( carborundum universal make ) , emery cloth fine ( carborundum universal make ) , helmets plastic fitted , s.s. pipeid 6mm, od 8mm , m.s. tube id 6 mm, od 8 mm , rustoline 500 gram tin , h.s.s. hacksaw blades 1 / 2 x 12 ( miranda make ) , hexaframemiranda make , bluetube 10 gm pack , brasso 500 ml , araldite 180g each , crc26 ( 500 ml pack ) , leatherised paper05 mile , leatherised paper07 mile , leatherised paper10 mile , m.s. wire brush with handle ( 4 rows ) size 4” , m.s. wire brush with handle ( 4 rows ) size 6” , lead wire 3mm dia , leather hand glove 18 , copper tube bender upto 3 / 8 copper tube , m.s. u clamp 1 / 2 , m.s.‘u’ clamp ¾” , anabond 250 gm pack , wire rope clamp ( 5 / 8 ) inch , wire rope clamp ( 1 inch ) , nylon gray wire rope 1 , nylon gray wire rope 1.5” , plumb bob 1.5 dia , center punch hardened steel 100 mm length , center punch hardened steel 125 mm length , center punch hardened steel 150 mm length , ball pen hammer 1 / 2 lbs , ball pen hammer 2 lbs , sledge hammer 7 kg , cold chisel4” ( jhalani / taparia make ) , cold chisel6” ( jhalani / taparia make ) , cold chisel8” ( jhalani / taparia make ) , vernier calliper 8make mitutoyo japan , dialvernier calliper 12make mitutoyo japan , taper drill socket ( 1, 2, 3, 4 ) , divider 6 , divider 12 , loctite 406 ( 20 gm. pack ) , readymade wire rope sling with both end loop 15t capacity x 6mtr long , master level4 size mitutoyo make japan , master level6 sizemitutoyo make japan , filler gauge make mitutoyo japan metric size4 long , filler gauge make mitutoyo japan metric size6” long , filler gauge make mitutoyo japan metric size3” long , loctite 510 ( 200 gm. pack ) , rubber joint 1 / 8 , rubberjoint 1 / 4 , rubberjoint 1” , rubberjoint 2” , emery cloth role ( black ) each of 50 mtr ( carborendum make ) 50 mm wide rough no. 60 , emery cloth role ( black ) each of 50 mtr ( carborendum make ) 100 mm wide rough no. 60 , emery cloth role ( black ) each of 50 mtr ( carborendum make ) 50 mm wide smooth no. 120 , emery cloth role ( black ) each of 50 mtr ( carborendum make ) 100 mm wide smooth no. 120 , emery cloth role ( black ) each of 50 mtr ( carborendum make ) 50 mm wide very fine no. 120 , valve grinding paste carborendum make rough 400 gram pack , valve grinding paste carborendum make smooth 400 gram pack , brass shims 300 mm widex 1 mtr. long , brass shims 4 thou , brass shims6 thou , brass shims 8 thou , brass shims 0.25 mm , brass shims 0.50 mm , brass shims 1.0 mm , piano wire 0.5 mm dia , piano wire 1 mm dia , hand shovels , hand trolley which can handle 200 kg wt. load ( multipurpose ) , teflon tape ½” width , teflon tape ¾” width , teflon rod½” , teflon rod¾” , teflon rod 1” , teflon rod 40 mm , teflon rod50 mm , teflon rod 80 mm , holdite compound 100 gram , steam hose pipe 1 / 2 bore ( dunlop make ) three ply , steam hose pipe 3 / 4 bore ( dunlop make ) three ply , steam hose pipe 1 bore ( dunlop make ) three ply , 20 mm nb ball valve , split pin niddel fold 1 / 8” x 2 , split pin niddel fold 1 / 8” x 2.5 , split pin niddel fold3 / 16” x 2 , split pin niddel fold ¼”x 2 , split pin niddel fold5 / 32” x 2.5 , split pin niddel fold1 / 16” x 1.5 , split pin niddel fold 5 / 16” x 1.5 , split pin niddel fold 6mm x 65 mm , split pin niddel fold 3 mm x 25 mm , split pin niddel fold 4 mm x 50 mm , spring washer champion make 1 / 4 , spring washer champion make 3 / 8 , spring washer champion make1 / 2 , spring washer champion make5 / 8 , spring washer champion make3 / 4 , spring washer champion make1 , spring washer champion make 27 mm , reinforced rubber black hose pipe ( id=1, od=1 1 / 2 ) , acrylic fibre sheet transparent size 6 x 4 x 8 mm thick , m.s. flange size 3 , m.s. flange size 4 , m.s. flange size6 , m.s. flange size 8 , alluminum revet all size , copper revet all size , copper washer all size , manila rope½” , manila rope ¾” , m. seal ( pedilit ) , graphite powder universal / corborendom make , white lead sakura , red lead devaldi make , dial gauge indicator complete with magnetic stand holder & accessories 2 dia ( mitutya japan ) , s.s. 304 jali, hole 5mm dia, 3 no. of holes in 1, length=1800mm, width=610mm, thickness=3 mm , hand drilling machine ( pistol drill ) up to 16 mm make wolf / boss , hand drill bit upto 16mm , hydraulic jack 05mt best make , hydraulic jack 10mt best make , turn buckle 10 mt , chain block of two way chain with 15 mtr. lifting heavy duty make indef 2 mt capacity , chain block of two way chain with 15 mtr. lifting heavy duty make indef 3 mt capacity , chain block of two way chain with 15 mtr. lifting heavy duty make indef 5 mt capacity , chain block of two way chain with 15 mtr. lifting heavy duty make indef 10 mt capacity , chain ratchet 0.5 t , chain ratchet 1.0 t , manila rope pulley suitable for 35 mm dia 3 way suitable for 2 mt heavy duty swlite make , manila rope pulley suitable for 35 mm dia 2 way suitable for 2 mt heavy duty swlite make , manila rope pulley suitable for 35 mm dia 1 way suitable for 1 mt heavy duty swlite make , one way free pulley suitable for 1mt , box spanner set complete ( 8 mm to 32mm ) with wratchet taparia / jhalani , adjustable spanner sizes 08 inch chrome plated taparia / jhalani make , adjustable spanner sizes 12 inch chrome plated taparia / jhalani make , d spanners 36mm x 41mm sizes taparia / jhalani , d spanners6mm x 32mm sizes taparia / jhalani , d spanners 46mm x 50mm sizes taparia / jhalani , d spanners 55mm x 60mm sizes taparia / jhalani , ring spanners size 36mm x 41 mm taparia / jhalani , ring spanners size 46mm x 50 mm taparia / jhalani , ring spanners size 55mm x 60 mm taparia / jhalani , pipe wrenches of size 12 inch taparia / jhalani make , pipe wrenches of size 18 inch taparia / jhalani make , pipe wrenches of size 24 inch taparia / jhalani make , allenkeys set of size 1.5 mm x 10 mm taparia / jhalani make , allenkeys set of size 12 mm taparia / jhalani make , allenkeys set of size 14 mm taparia / jhalani make , allenkeys set of size 17 mm taparia / jhalani make , allenkeys set of size 19 mm taparia / jhalani make , allenkeys set of size 22 mm taparia / jhalani make , allenkeys set of size 24 mm taparia / jhalani make , flat file rough j.k. make 12 inch. , flat file fine j.k. make 12 inch. , round file rough j.k. make 12 inch. , round file fine j.k. make 12 inch. , safety belts nylon arc make , readymade nylon rope slings with loops at both sides leo make 1 ton capacity 3 mtr length , readymade nylon rope slings with loops at both sides leo make 2 ton capacity 3 mtr length , readymade nylon rope slings with loops at both sides leo make 5 ton capacity 6 mtr length , readymade nylon rope slings with loops at both sides leo make 10 ton capacity 6 mtr length , wire rope sling with both end loops size 18 mm x 15 mtr. , wire rope sling with both end loops size 12 mm x 15 mtr. , hammer 10 lbs taparia / jhalani , hammer 16 lbs taparia / jhalani , hammer 06 lbs taparia / jhalani , measuring tape size 3 mtrs plastika fiber make , measuring tape size 5 mtrs plastika fiber make , measuring tape size 15 mtrs plastika fiber make , measuring tape size 30 mtrs plastika fiber make , s.s. scale 1 feet omega make , s.s. scale 1 mtr. omega make , d shackle 5 mt capacity taparia / jhalani , d shackle 10 mt capacity taparia / jhalani , d shackle 15 mt capacity taparia / jhalani , d shackle 20 mt capacity taparia / jhalani , insulated plier 8 inch , nose plier , cable stappler , phase tester , insulated screw driver size 06 inch taparia / jhalani , insulated screw driver size 08 inch taparia / jhalani , insulated screw driver size 10 inch taparia / jhalani , g.d.s. input spanner 01 inch drive complete set bosh make , dial indicator with magnat stand mitutoyu make japan , dial micro meter mitutoyu make japan , digital industrial magger mitutoyu make japan , digital multi meter mitutoyu make japan , sprit level 12 inch mitutoyu make japan , inside calliper 500 mm mitutoyu make japan , inside calliper 12 inch mitutoyu make japan , out side galliper 500 mm mitutoyu make japan , out side galliper 12 inch mitutoyu make japan , divider 500 mm mitutoyu make japan , portable industrial blower wolf make , portable angle grinder bosh / wolf make 4 inch , portable angle grinder bosh / wolf make 4 inch , portable angle grinder bosh / wolf make 7 inch , benchwise 6 , carbon bushfor angle grinder 4 inch , carbon bushfor angle grinder 6 inch , tri square 6 inch, , tri square 12 inch , screw driver with testermake taparia , m.s. nut mm size ( all size ) , m.s. plain washer mm size ( all size ) , m.s. nut inch size ( all size ) , m.s. washer inch size ( all size ) , m.s. nut bolt ( all size ) accurate / gkw make in inch sizes , m.s. nut bolt ( all size ) accurate / gkw make in mm sizes , g.i. nut & bolt ( all size ) accurate / gkw make in inch sizes , g.i. nut & bolt ( all size ) accurate / gkw make in mm sizes , h.t.bolt grade 10.9 m27 x 105 , h.t. boltgrade 8.9 m27 x 100 mm , h.t. boltgrade 8.9 m30 x 2 mm , nyloc nut16mm , nyloc nut 24mm , nyloc nut25 mm , nyloc nut27 mm , nyloc nut 30mm , nyloc nut 32mm , nyloc nut 27mm , nyloc nut 24mm , nyloc nut 20mm , ht nut16 mm , htnut 24 mm , htnut 27 mm , ht bolt with nut grade 4.8 m20 x 75 , ht bolt with nut and washer m24 x 90 , ring spanner set 6 32 , d spanner set6 32 , d spanner set 36 41 , d spanner set 46 50 , d spanner set 55 60 mm , adjustable wrench 12 , adjustable wrench 8 , power hexa blade size 1 * 16 , screw driver 6 , screw driver 8 , screw driver 10 , micro meter , digital multimeter , angle grinder paste ( clu make ) , grinding wheel ag4 ( rough ) , grinding wheel ag4 ( fine ) , grinding wheelag5 ( rough ) , grinding wheelag5 ( fine ) , grinding wheel ag7 ( rough ) , grinding wheel ag7 ( fine ) , cutting wheel ag7 , cutting wheel ag5 , cutting wheel 4 , break liner ferodo make 1 / 2 x 5 , break liner ferodo make8 x 75 mm , break liner ferodo make width=130 mm, thickness=8 mm , castle nutm 24 , castlenutm 30 , hammuring spannerring type 42 no. , hammuring spannerring type 44 no. , c / u make deposed wheel ( hi cut grinding wheel 125 * 25 * 2223 , disk 125 mm , bearing puller 12 , ring spannertaparia / jhalanimake , loop ealibartor , tstdrill6 mm , tstdrill bit set , tstdrill 8 mm , tstdrill 10 mm , tstdrill 12 mm , tstdrill 16 mm , tstdrill 20 mm , tstdrill 24 mm , threadgauge , thread tups1 / 4 , thread tups 5 / 16 , thread tups 3 / 8 , thread tups 7 / 16 , thread tups 1 / 2 , thread tups 5 / 8 , thread tups3 / 4 , thread tups8 mm , thread tups 12 mm , thread tups6 mm , thread tups16 mm , thread tups18 mm , thread tups20 mm , thread tups24 mm , m.s.round bar 25 mm , m.s.round bar 50 mm , m.s.round bar 60 mm , m.s.round bar75 mm , m.s.round bar100 mm , m.s.round bar12 mm , m.s.round bar16 mm , m.s.round bar20 mm , s.s.round bar 50 mm , s.s.round bar 60 mm , s.s.round bar75 mm , s.s.round bar100 mm , s.s.round bar150 mm , usha martin make steel wire rope 19.0 mm for cane unloader , spring steel flat 63 x 10mm , spring steel flat 63 x 8mm , spring steel flat 45 x 6mm , spring steel flat25 x 3mm , gear coupling gc 103 , gear coupling gc 104 , gear coupling gc 108 , gear coupling gc 109 , gear coupling gc 110 , gear coupling gc 115 , lead wire 1.5 mm , s.s.plate3mm grade 410 , locltite 500 ( 100 ml pack ) , split pin bolt 21 x 18 x80 , quarter pin 6 x 65 mm , quarter pin 4 x 40 mm , g.m. solid round bar ( difft. sizes ) , casted g.m. hollow round bar ( difft. sizes ) , plumber block sn 512 , plumber block sn 513 , plumber block sn 515 , plumber block sn 516 , plumber block sn 517 , plumber block sn 518 , plumber block sn 520 , plumber block sn 522 , plumber block sn 530 , ceramic wool , p.v.c. pipe 1 , htallen bolt 16 x 65 mm , ht bolthalf thread ( unbrako make ) m 27 x 110 mm , ht bolt full thread ( unbrako make ) m 24 x 150 mm , htbolt & nutfull thread m 12 x 60 mm , htbolt ( unbrako ) full thread 24 x 100 mm , htbolt ( unbrako ) full thread 16 x 260 mm , htbolt ( unbrako ) full thread 16 x 100 mm , htbolt ( unbrako ) full thread 27 x 110 mm , htbolt ( unbrako ) full thread 16x 60 mm , cutting nozzle esab make 3 / 64 , cutting nozzle esab make 1 / 64 , esab make welding holder 600 amp. , esab make welding cable ( copper ) , esab make welding cable ( alluminium ) , gas cutting wrapped hose pipe for oxygen 8 mm ( blue ) , gas cutting wrapped hose pipe for l.p.g. 8 mm ( red ) , esab make oxygen regulator , esab make lpg regulator , cutting nozzle for lpg set 1 / 16 , cutting nozzle for lpg set 1 / 8 , cutting nozzle for lpg set 3 / 32 , cutting nozzle for lpg set 3 / 64 , welding glass black , welding glass white , esab make gas cutting torch cutogen 5 , c.i. casted pully / coupling / drum as per drg. / sample with material , s.s. screen having 625.5 holes / sq. mtr universal make v / f sze 14x28, size of screen 600 mm width x 2300 mm length x 30 swg having both side 50mm border. , rubber oil seal 50 70 9 , rubber oil seal 55 72 8 , boring tool 3 / 8 , boring tool 1 / 2 , boring tool 3 / 4 , boring bar 3 / 8 , boring bar 1 / 2 , boring bar 3 / 4 , seamless pipe schedule 40 size 1 / 2 , seamless pipe schedule 40 size 3 / 4 , seamless short bend schedule 40 size 1 / 2 , seamless short bend schedule 40 size 3 / 4 , seamless short bend schedule 80 size 1 / 2 , seamless short bend schedule 80 size 3 / 4 , grooving tool 300 x 40 x 45 , grooving tool 300 x 40 x35 , grooving tool 300 x 40 x 50 , flat file rough 14” , flat filefine 14” , flat file rough 16” , flat file smooth 16” , flat file rough 200mm , flat filefine200mm , round file rough 200mm , round file fine200mm , half round file 14” , silicon brass rod 2mm , flap disc 5” , mechanical seal50x60x 7 / 10 , filler gauge 8” , welding head screen , tap set 36 mm x 4 mm pitch , rubber hose pipe 1” , welding cutting torch , cutting lighter , emery paper rough ( rim ) , emery paperfine , angle grinder ag 7 ( rollywolf ) , painting brush4” , painting brush3” , painting brush2” , outside caliper 450 mm , outside caliper 600 mm , inside caliper 450 mm , inside caliper 600 mm , oxygen regulator nrv , cutter nrv , allen bolt 5 x 20 mm , allen bolt 5 x 15 mm , sa steel socket ( jhalani / taparia ) , chavi bright bar 40 x 20 mm , inside circlip plier 300 mm , outside circlip plier 300 mm , circlip 115 mm od , allen key set ( inch size ) , m.s. flange 325 x 16 mm , o ring50 x 4 , d.p. kit set of 3 pcs , d.p. cleaner , m.s. stud with nut1 / 2 x 3 , m.s. stud with nut10 x 35 mm , m.s. stud with nut10 x 40 mm , s.s. bolt & nut 10 x 50 mm , shining gold galvanizing cooling , split pin 1 / 4 x 2 1 / 2 , square springen 9, 20 x 225 x 90 mm , bet circlip plier 18 , bet circlip plier24 , trolly wheel , h.t. bolt half thread with nut & washer 16 x 180 mm , inside circlip40 mm , m.s. bolt16 x 75 , m.s. bolt16 x 65 , m.s. bolt12 x 50 , m.s. bolt20 x 75 , m.s. bolt 10 x 100 , m.s. bolt10 x 35 , m.s. bolt & nut 25 x 150 mm , m.s. bolt & nut 6 x 50 mm , m.s. bolt & nut 8 x 50 mm , m.s. bolt & nut 10 x 50 mm , h.t. bolt full thread 12 x 75 mm , h.t. bolt full thread 12 x 50 mm with lock nut , h.t. bolt full thread 8 x 30 mm , h.t. bolt full thread 1 x 50 mm , h.t. bolt20 x 90 , h.t. nut 12 mm , h.t. allen bolt half thread 16 x 75 , h.t. allen bolt half thread 12 x 75 , h.t. allen bolt8 x 35 mm , h.t. allen bolt 8 x 25 mm , h.t. stud 1 / 2 x 3 with nut , s.s. allen bolt 12 x 45 mm , s.s. allen bolt 12 x 75 mm , s.s. allen bolt 12 x 35 mm , s.s. allen bolt 8 x 25 mm , l.r.b. pad ( ceramic wool ) 2 thick x 2 mtr² , glass wool , coupling set 190 / 140 , o ring silicon 50 x 60 x 5 , safety belt full body ( isi marked ) , butterfly valve sheetdn 350, 14 mm , butterfly valve65 mm ( crane make ) , butterfly valve 100 mm ( crane make ) , c.i. nrv 200 mm pcd 295 ( isi marked ) , c.i. nrv 150 mm pcd 240 ( isi marked ) , c.i. nrv 100 mm pcd 180 ( isi marked ) , well fastener bolt, nut & washer 3 / 8 x 1 1 / 2 , deemar regulator for welding machine , counter sank bolt & nut 4 x 20 mm , m.s. arm big , m.s. arm small , metallic spiral gasket id 54 mm x 4.5 mm thick , multi purpose sealant 732 temp. 180°c , brass strip size 38 mm x 16 mm ( hsn code 7407 ) , brass strip size 16 x 65 , brass strip size 12 x 50 , brass strip size 20 x 75 , brass strip size 10 x 100 , brass strip size 10 x 35 , c.i. pin bush coupling urb 320 size 8”as per drg. ( lov joy ) complete set , fenoflex tyre coupling complete set f / ph 140 , neoprin rubber bush as per sample size od 18.5mm, id 10.5 mm, length 15.5mm , wafer type nrv check valve size 80mm as per sample , trolly drum gear coupling dia 150 mm , drum gear coupling dia 300 mm , brake shoe liner 6 x 130 mm , brake shoe liner 6 x 75 mm , hydex sleeve h 48 , solenoid valve with coil ( d64v 5 8c jvm vh6 20 ) vicker make , suction line filter ( hydroline ife 50 25 b ) , returning line filter ( hydroline sc 3050 ) , wear pad ( black / white ) , material metalon ( 6plb ) , seal kit assembly for hydraulic cylinder size 80 mm , m.s. hydraulic connector 3 / 4 , shaft for hydraulic pump of cane unloader model pvq 40 ( vicker make ) , carbide tip tool 35° , carbide tip tool 45° , carbide tip tool 50° , carbide tip tool 55° , air steel square tool with 70% carbon 1 1 / 4 , hss carbon tool 1 / 4 , hss carbon tool 5 / 16 , silicon bronzerod 3mm , tempered centre for 30 feet lathe , drill socket for 1 drill , tool grinder wheel rough 10 od x 1 thickness x 1 1 / 4 bore ( black ) , tool grinder wheel rough 10 od x 1 thickness x 1 1 / 4 bore ( green ) , red oxide primer zinc chromate , post office red paint , azure blue paint , bus green paint , tractor orange paint , golden yellow , smoke gray paint , black paint , white paint , spring steel flaten 4563 x 8mm , spring steel flat en 4545 x 6 mm , g.m. solid rod 50 mm od x 12 long , g.m. solid rod 80 mm od x 12 long , g.m. hollow cylinder 60 mm id, 150mm od & 12 length , ksb make ibr approved steam value tested at 60 kg / cm2 pressure with test certificate, class 1500 size 3 / 4 non flanged end. , ksb make ibr approved steam value tested at 70 kg / cm2 pressure with test certificate, class 800 size 1 non flanged end. , ksb make ibr approved steam value tested at 70 kg / cm2 pressure with test certificate, class 800 size 1.5 non flanged end. , ksb make ibr approved steam value tested at 70 kg / cm2 pressure with test certificate, class 800 size 2 non flanged end. , seamless pipe schedule 40 size 3 / 4 , seamless pipe schedule 40 size 2 , seamless pipe schedule 40 size 2.5 , seamless short bend schedule 40 size 3 / 4 , steam rubber hose pipe wire braided hp r 2, 32mm ( 1 1 / 4 ) , fenoflex spacercoupling complete f0100es , elbow ferrul 8 mm , elbow ferrul nut 8 mm , stag jointing paste , premium zinc alluminium galavanizing spray , premiumgold zinc galavanizing spray , aluminium sheet 14 gauge , schedule 80 pipe –dia 50mm , schedule 80 pipe –dia 100mm , schedule 80 pipe –dia 150mm , schedule 80 pipe –dia 200mm , schedule 80 pipe –dia 300mm , schedule 40 pipe –dia 50mm , schedule 40 pipe –dia 100mm , schedule 40 pipe –dia 150mm , schedule 40 pipe –dia 200mm , schedule 40 pipe –dia 300mm , heavy duty hydraulic pump , 60 tonn load, max. pressure 730kg. , channel 75mm , channel 100mm , anglebar75 mm , joist300mm bar , rubber goods, oil seal, butterfly valve& v belts , rubber joint 1 / 8 , rubberjoint 1 / 4 , rubberjoint 1” , rubberjoint2” , oil seal50x65x8 , oil seal45x65x8 , oil seal90x70x10 , oil seal59x80x10 , oil seal25x38x7 , oil seal40x60x7 , oil seal 75x100x13 , oil seal 30x45x7 , oil seal35x50x7 , oil seal40x50x7 , oil seal 80x100x10 , oil seal 80x55x10 , oil seal 80x55x8 , oil seal 90 x 120 x 12 , oil seal 100 x 120 x 12 , oil seal 100 x 120 x 10 , oil seal 70x55x10 , oil seal 37x25x7 , oil seal 95 x 120 x 13 , oil seal55 x 75 x 8 , oil seal50 x 75 x 8 , oil seal75x 52 x 12 , oil seal 60 x 80 x 10 , oil seal 25 x 35 x7 , oil seal 55 x72x9.5 , oil seal 50x72x10 , oil seal 35x50x10 , oil seal 42x75x10 , oil seal 45x62x12 , oil seal 30x40x7 , oil seal 70x90x10 , oil seal 25x62x8 , oil seal 58x80x13 , oil seal 60x75x7 , oil seal 40x60x10 , oil seal 40x62x8 , oil seal 30x72x10 , oil seal 75x100x10 , oil seal 75x105x13 , oil seal 28x45x7 , oil seal 110x150x13 , oil seal 62x90x10 , oil seal 120x150x12 , oil seal 25x62x10 , oil seal 17x47x8 , oil seal 25x38x6 , oil seal 200x300x16 , oil seal 50x65x8 , oil seal 30x72x7 , oil seal 50x72x8 , oil seal 65x90x10 , oil seal 40x62x7 , oil seal 150x110x14 , oil seal 200x230x15 , oil seal 25x40x7 , oil seal 80x58x13 , oil seal 25x35x6 , oil seal 30x40x6 , oil seal 25x40x10 , oil seal 65x75x10 , gate valve 15 mm ( ksb make ) class 800 ibr , gate valve 25 mm ( ksb make ) class 800 ibr , gate valve 50 mm ( ksb make ) class 800 ibr , check valve 25 mm ( ksb make ) class 800 ibr , check valve 50 mm ( ksb make ) class 800 ibr , butterfly valve sheetdn 350, 14 mm , butterfly valvedn 350, 14 mm , butterfly valve50 mm ( crane make / ksb ) , butterfly valve65 mm ( crane make / ksb ) , butterfly valve80 mm ( crane make / ksb ) , butterfly valve 100 mm ( crane make / ksb ) , butterfly valve 125 mm ( crane make / ksb ) , butterfly valve 150 mm ( crane make / ksb ) , butterfly valve 200 mm ( crane make / ksb ) , butterfly valve 250 mm ( crane make / ksb ) , butterfly valve 5 size crane make , butterfly valve 6 size crane make , butterfly valve 8 size crane make , butterfly valve 10 sizecrane make , butterfly valve 12 size crane make , butterfly valverubber seat for 65 mm size valve ( crane make ) , butterfly valve rubber seat for80 mm size valve ( crane make ) , butterfly valve rubber seat for100 mm size valve ( crane make ) , butterfly valve rubber seat for 5 size valve ( nitrile epdm ) crane make , butterfly valve rubber seat for 6 size valve ( nitrile epdm ) crane make , butterfly valve rubber seat for 8 size valve ( nitrile epdm ) crane make , butterfly valve rubber seat for 10 size valve ( nitrile epdm ) crane make , butterfly valve rubber seat for 12 size valve ( nitrile epdm ) crane make , ksb make nrv size 1 , ksb make nrv size 1.5 , ksb make nrv size 2 , angle valve rubber seat ( silicon butyl ) temp. resistance +200oc size 280 odx170 idx20 mm thickness , angle valve rubber seat ( silicon butyl ) temp. resistance +200ocsize 325 odx210 idx20 mm thickness , angle valve rubber seat ( silicon butyl ) temp. resistance +200oc size 400 odx270 idx20 mm thickness , angle valve rubber seat ( silicon butyl ) temp. resistance +200oc size 550 odx420 idx20 mm thickness , angle valve rubber seat ( silicon butyl ) temp. resistance +200oc size 650 odx520 idx20 mm thickness , angle valve rubber seat ( silicon butyl ) temp. resistance +200oc size 950 odx800 idx25 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 325 odx210 idx20 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 280 odx170 idx15 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 230 odx80 idx12 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 170 odx65 idx12 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 145 odx40 idx12 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 125 odx40 idx12 mm thickness , puri make globe valve rubber seat ( neoprene ) temp. resistance +150oc size 100 odx20 idx12 mm thickness , rubber diaphragm valve for so2 gas line ( neoprene ) size8” valve ( sheet ) od 410 x 10 mm thick , rubber diaphragm valve for so2 gas line ( neoprene ) size6” valve ( sheet ) od 310 x 10mm thick , rubber diaphragm valve for so2 gas line ( neoprene ) size 4” valve ( sheet ) od 225 x 10mm thick , neoprene rubber ring for manhole temp. resistance + 1500c size od 580x id 490x 10mm thick , double beat valve rubber seat for juice heater ( neoprene ) size 235mm odx12mm thickness central hole ø 25mm , juice heater rubber strip size 16mm x 16mm x 12mm , rubber seat for mud telescopic valve ( dorr ) , ( neoprene ) size 200mm od x 165mm id x 15mm thick , rubber hose pipe size 1 , rubber hose pipe size 3 / 4 , rubber coupling bush dholak type od at centre=29.8 mm, od at side end= 22mm, id= 12mm, length=33mm , seal kit complete set for 200mm cylinder of pan cut over valve , seal kit complete set for 300mm cylinder of pan discharge valve , seal kit complete set for 80mm cylinder of lock valve , rubber seat for pan discharge valve size 650mm od x 490mm id x 25mm thick , pan cut over valve rubber seat 265 x 175 x 20 mm , rubber kit for plough ( three cylinders ) plough up & down , rubber kit for plough ( three cylinders ) plough down & up , rubber kit for plough ( three cylinders ) plough in & out , bottom hood cylinder rubber kit , mtc controller cylinder complete rubber kit , angle valve rubber seat for quad sizes od=850mm, id=700mm, thickness= 20mm , rubber mud seal for dorr size 20 x 18 x 10mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 50mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 65mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 80mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 100mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 125mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 150mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 200mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 250mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 300mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 350mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 400mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 450mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 500mm , crane make wafer type butterfly valve c.i. body, ss disc epdm h of size 600mm , liner for butterfly valve c.i. body, ss disc 50 mm , liner for butterfly valve c.i. body, ss disc 65 mm , liner for butterfly valve c.i. body, ss disc 80 mm , liner for butterfly valve c.i. body, ss disc 100 mm , liner for butterfly valve c.i. body, ss disc 125mm , liner for butterfly valve c.i. body, ss disc 150 mm , liner for butterfly valve c.i. body, ss disc 200 mm , liner for butterfly valve c.i. body, ss disc 250 mm , liner for butterfly valve c.i. body, ss disc 300 mm , liner for butterfly valve c.i. body, ss disc 350 mm , liner for butterfly valve c.i. body, ss disc 400 mm , liner for butterfly valve c.i. body, ss disc 450 mm , liner for butterfly valve c.i. body, ss disc 500 mm , liner for butterfly valve c.i. body, ss disc 600 mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 15mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 20mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 25mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 32mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 40mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 50mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 65mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 80mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 100mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 125mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 150mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 200mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 250mm , sounders brand diaphragm valve with neoprene weir type flanged end with hard rubber lined 300mm , siliconied butyl rubber seat size 400 x 260x25 mm , siliconied butyl rubber seat size 400 x 315x25 mm , pan feed valve seat size 170 x 65 x 12 mm , pan feed valve seat size 145 x 40 x 12 mm , pan feed valve seat size 125 x 40 x 12 mm , dorr mud seal 20 x 25 x 22mm , rubber seat plain 100 x 20 x 10 mm , rubber seat plain 80 x 20 x 10 mm , rubber seat for gasket 1500 x 5000 x 6 mm , seal kit for main pneumatic cylinder of pan discharge valve size 12 ( puri make ) , coupling tyre complete flex 6 , tyre coupling complete hpt 292b , tyre coupling complete f 60 , tyre coupling complete f 100 px , tyre coupling complete hpt 70 , tyre coupling complete hpt 218 , tyre coupling complete f 120 , tyre coupling complete f 110 , coupling assembly l 100 , tyre coupling complete hpt 220 , tyre coupling hpt 178 , tyre coupling hpt 160 , tyre coupling complete ftc 08 , tyre coupling complete ftc 010 , tyre coupling complete hpt 126 , star coupling completel 75 , coupling tyre f 80 , spider rubber 95 100 , spider rubber 100 110 , spider rubber 75 , rubbertyrefor coupling hpt 292b , rubber tyrefor couplingf 120 , rubber tyrefor couplingsw 110 , rubber tyrefor couplingsw 190 , rubber star for coupling l 100 , rubber star for coupling l 75 , rubber tyre for coupling hpt 220 , rubber tyre for coupling hpt 178 , rubber tyre for coupling hpt 160 , rubber tyre for coupling hpt 106 , rubber tyre for coupling hpt 106 , rubber tyre for coupling hpt 292 , rubber tyre for coupling ftc 010 , rubber tyre for coupling hpt 126 , rubber tyre for coupling ftc 013 , rubber tyre for coupling hpt 250 , rubber tyre for coupling ph 126 , rubber tyre for coupling l 110 , rubber tyre for coupling hpt 272 , rubber tyre for coupling hpt 190 , rubber tyre for coupling hpt 140 , coupling lfg 102 , coupling lfg 103 , teflon gland 6mm , teflon gland 8mm , teflon gland 10mm , teflon gland 12mm , spiral gasket 2.5inches or 35 mm , cast steel items , cast steel trash plate for mill size 36” x 72” on new material basis, material cast steel is: 2708 1984, grade iii proof machined as per drg. no. ss0008 05252501 008 052 rev ( 00 ) after proof machining extra size in length, width & height will be 5 10mm limit range , cast steel trash plate for mill size 36” x 72” on new material basis, material cast steel is: 2708 1984, grade iii proof machined as per drg. no. ss0008 05250532 008 rev ( 00 ) after proof machining extra size in length, width & height will be 5 10mm limit range , cast steel trash plate for mill size 36” x 72” on conversion basis, material cast steel is: 2708 1984, grade iii proof machined as per drg. no. ss0008 05252501 008 052 rev ( 00 ) after proof machining extra size in length, width & height will be 5 10mm limit range , cast steel trash plate for mill size 36” x 72” on conversion basis, material cast steel is: 2708 1984, grade iii proof machined as per drg. no. ss0008 05250532 008 rev ( 00 ) after proof machining extra size in length, width & height will be 5 10mm limit range , cast steel crown pinion having 17 teeth for mill size 36 x 72 on new material basis is : 2708 , cast steel crown pinion having 17 teeth for mill size 36 x 72 on conversion basis is : 2708 , forged steel proof machined normalised roller shaft ( bloom ) of c8 quality as per is:1570 1979 & amanded upto date having tensile strength not less than 58kg / mm2 duty tested ultrasonically suitable for mill roller size 36x 72 . bloom size 530mm dia x 4720mm length....

Kisan Sahkari Chini Mills Limited - Uttar Pradesh

37729393 supply of general store items for the season 2023 24 , description , arlardite in 36 grms. pidilite make , arlardite in 90 grms. pidilite make , arlarditein 180 grms. pidilite make , m. seal general purpose in a 1.00 kg. pack original pidilite make , cotton waste white dust proof , cotton waste coloured. , emery paste in 400 grms pack carborandum / universal make ( a ) rough , emery paste in 400 grms pack carborandum / universal make ( b ) fine , emery paste in 25 grms rough / fine waxpol make , emery cloth in a 500 sheet pack carborandum / universal make ( a ) rough , emery cloghin a 500 sheet pack carborandum / universal make ( b ) fine , emery cloth in a 500 sheet pack johan okey make ( a ) rough , emery cloth in 500 sheet pack johan okey make ( b ) fine , emery tape in a standard roll of 50 mtr. carborandum / unversal make ( a ) size 1 1 / 2rough , emery tape in a standard roll of 50 mtr. carborandum / unversal make ( b ) size 1 1 / 2 fine , emery tape in a standard roll of 50 mtr. carborandum / universal make © size 2 rough , emery tape in a standard roll of 50 mtr. carborandum / universal make ( d ) size 2 , emery tape in a standard roll of 50 mtr. johan okey make ( a ) size 1 1 / 2 rough , emery tape in a standard roll of 50 mtr. johan okey make ( b ) size 1 1 / 2 fine , emery tape in a standard roll of 50 mtr. johan okey make © size 2 rough , emery tape in a standard roll of 50 mtr. johan okey make ( d ) size 2 fine , painting brush ( a ) size 1 , painting brush ( b ) size 2 , painting brush © size 3 , painting brush ( d ) size 2 fine , p.p. nylol rope size 3 / 4 tested quality , coir string ( a ) size 1 / 2 , coir string ( b ) size 3 / 4 , rustolene in a standard pack of 1 / 2 ltr. hard castle make , holdite perfect liqui jointing compound in standard packing 1 / 2 kg. , graphite powder in a standard tin of 1 / 2 kg. , namda ( wollen felt compressed ) size 1 / 2 thickness , namda ( wollen felt compressed ) size 3 / 4 thickness , namda ( wollen feltcompressed ) size 1 , stage red jointing paste b type , brasso liquid in a standard tin of 100 ml , sakura make white lead , sakura make white lead in a standard tin of 10 kg. , sakura make white lead in a standard tin of 20 kg. , devi dayal make red lead dry original in a bag of 25 kg. , blue tube in a pack of 20 ml. , taflon tape champion make ( a ) size 3 / 4 in a roll , taflon tape champion make ( a ) size 1 / 2 in a roll , p.v.c. transparant pipe ( a ) size 05mm od , p.v.c. transparant pipe ( b ) size 1 / 2 od , p.v.c. transparant pipe © size 3 / 4 od , taflon rod graware / champion make ( a ) 25mm odx300mm length , taflon rod graware / chamipion make ( b ) 30mm odx300mm length , taflon rod graware / champiion © 60mm odx300mm length , talflon rod graware / chamipion make ( d ) 80mm odx300mm length , taflon road graware / chamipon make ( e ) 120mmodx300mm length , hose pipe clamp jupitor make mild steel worm drive type jm 203 ( a ) size 3 / 4 , hose pipe clamp jupitor make mild steel worm drive type jm 203 ( b ) size 1 , hose pipe clamp jupitor make mild steel worm drive type jm203 © size 1 1 / 2 , hose pipe clamp jupitor make mild steel worm drive type jm 203 ( d ) size 2 , hose pipe clamp jupitor make mild steel wormdrive type jm 203 ( e ) size 3 , boiler gauge glass tube original in original packing size 3 / 4x22 bishap adament make size 3 / 4x22 long , boiler gauge glass rubber conical ring size 3 / 4 for above superior quality , boiler gauge glass original kilinger make extra head bosro silicate thermally prestressed size b 9 340x34x17mm , plug sleevefor gauge glass size 20mm leader make , hylum sheet in a standard size of 4x4x20mm , copper pipe in a standard roll of 10x12 ( a ) size 04mm od , copper pipe in a standard roll of 10x12 ( b ) size 06mm od , copper pipe in a standard roll of 10x12 © size 08mm od , copper pipe in a standard roll of10x12 ( d ) size 10mm od , asbestos non metallic tape proofed with rubber white , graphited finished made from turner / champion make size 1x / 8 , taflon impregnatedasbestos packing size 12mm , steel wire rope size 3 / 4 with test certificate usha martin make hamp core size 6x19 , steel wire rope size 3 / 4 with test certificate usha martin make hamp core size 6x36 , steel wire rope size 3 / 4 with test certificate usha martin make steel core 6x19`` , steel wire rope size 3 / 4 with test certificate usha martin make steel core 6x36`` , crussible double pigeon make ( a ) size 60 nos. , crussible double pigeon make ( b ) size 80 nos. , crussible double pigeon make © size 100 nos. , silicon , glass wool , chiken wirnetting size 3x50 in a roll , grease gun heavy dutyin a 05kg. capacity , u clamp forged quality ( a ) size 5 / 8 , u clamp forged quality ( b ) size 3 / 4 , u clamp forged quality © size 1 1 / 2 , u clamp forgedquality ( d ) size 3 , s.s. round all size , brassround all size , m.s. washer plain all size , s.s. sheet all size , s.s. sheet ( b ) size 4x8x3mmmm thick , alluminium sheet all size , alluminium sheet ( b ) size 4x8x8mm thick , brass shim in a standard size 14x48 ( a ) size 2 thou , brass shim in a standard size 14x48 ( b ) size 3 thou , brass shim in a standard size 14x48 © size 4 thou , brass shim in a standard size 14x48 ( d ) size 5 thou , brass shim in standard size 14x48 ( e ) size6 thou , brass shim in a standard size 14x48 ( f ) size 10 thou , vacuum hose pipe size 2 1 / 4x18 , lubrcator glass complete no. 6 , brass bronjoind rod size 1 / 8x1 / 4 , brass bronjoind lux i a tin of 500grms. , split pin champion make different size enclosed price list & offered discount. , spring washer squire section & flat section champion make o different size and offered discount. , alluminioum rivits of all size , glass tube size 12mmx4 , brass ferrule ( a ) size 6mm , brass ferrule ( b ) size 3mm , super bond electrodes ( a ) size s 2.15mm , super bond electrodes ( b ) size s 3.15mm , super bond electrodes © size ss 2.15mm , super bond electrodes ( d ) ss 3.15mm , loctite 50 ml no. 609 , loctite 30 ml no. 270 , lead wire500 grms. roll size 2mm , brass nut size 6mm , spring for trashplate clutchs lever , wooden handle steel wire brush size 6x3 , silicon ingot , borex , taflon rod size 45mmx300mm , b.s.f. nut size 1 / 2 , b.s.f. nut size 5 / 8 , thermo meter for 100°red mercury , brass connector size 6mm , vcuum gauge dial size 6bottom connection size 3 / 8x1 / 2direct mounting 760mm h. guru make model no.6p nnnm1 , compresating cableor thermo coupler , p.v.c. plastic tube size 1 / 4 , s.s. pipeaisi 304 qualityseamlesss sch 40 grade size 1 / 2 , namda sheet size 1 / 2 thick uniform make , soloniod coil for solonoid valve rotax make , brass tee size 6mm , high pressure steam joiting sheet metallic kilinger make 1000size 3mm ( 1 / 8 ) , dunlop make rubber hose pipe for water use inside dia 16mm , dunlop make rubber hose pipe for water use inside dia 19mm , dunlop make rubber hose pipe for water use inside dia 25mm , break linner size 1 / 2x4 hindustan composite make , p.p. rope size 3 / 4 grawara make with test certificate. , barbad wire , grease cup no. 6 , seitez rotex make soloniod valve sr 300b two way. , seotez rotex make soloniod valve sr 300single way , approxy hardner set old to new cureante set , srikomp cement acc make 20 30 , wd 40 spray , buffering wheel ag4 100x16 , hydraulic straight size ½ x 18 , hydraulic elbow size 8mm x ? , spring steel flatsize 400x5 , anabond 666 , shallac compound pidilite make , a poxy set , seal kit for seprator cylinder , m.s.connector size ½ x ½: , m.s.connector size ½ x ¼ , m.s.connector size ? x ¼ , m.s.connector size ? x ? , tripplex chain size 1 pitch size diamond make , c.i.football size 2 , f.f.2 flexible shaft , break linner size ?x 4 , connector for hydrauylicwith nut and fenrulsize 14 x 16mm , salonoide valve for sugar bin machine , salonoide valve for sugar bin machine , p, v.c. nrv size 1 , p.v.c. nrv size 2 , flat belt size 5x 3ply , safety halmet ( yellow colour ) , safety belt , boiler work wear suit ( blue colour ) , hexa blade ordinary ( a ) size 1 / 2x12 , hexa blade ordinary ( b ) size 1x12 , hexa blade spa / superior quality ( a ) size 1 / 2x12 , hexablade spa / superior quality ( b ) size 1x12 , hexa blade l&t / miranda make high steel ( a ) size 1 / 2x12x0.025 ( 23 gauge ) tpi 10.18 , hexa blade l&t / miranda make high steel ( b ) 1x12x0.050 ( 15 gauge ) tpi 10.14 , mearsuringtape steel freeman make both marking in inch &mm size ( a ) size 3 0 mtr. length , mearsuringtape steel freeman make both marking in inch & mm size ( b ) size 30 mtr. length , stainless steel scale both side marking in inches and mm size ( a ) size 6 , stainless steel scale both side marking in inches and mm size ( b ) size 12 , stainless steel scale both side marking in inches and mmsize ( c ) size 24 , stainless steel scale both side marking in inches and mm size ( d ) size 36 , samrat make revolving enters standard model with 60° point ( a ) more taper no.1 , samrat make revolving enters standard model with 60° point ( b ) more taper no.2 , samrat make revolving enters standard model with 60° point © more taper no. 3 , samrat make revolving enters standard model with 60° point ( d ) mosre taper no. 4 , samrat make revolving enters standard model with 60° point ( e ) more taper no. 5 , samrat make revolving enters standard model with 60° point ( f ) more taper no.6 , hexa frame 1 / 2x12 heavy duty , hole punch 3 / 8 and all size , rali wolf make angle grinder ag 4 complete , rali wolf make angle grinder ag 5 complete , rali wolf make ange grinder ag 9 complete , traingular filesize 5 coarse , carborandum / universal make combination stone size 6x2x1 coarse , mitutoyo japan make varnier caliper size 8x200mm ) 530 118 ) , chain block 2 ton. pmodel induf make with a load chain 10 mtr. safty chain 20 mtr. with test certificate with govt. approved test house. , chain block 3 ton. pmodel induf make with a load chain 10 mtr. safty chain 20 mtr. with test certificate with govt. approved test house. , chain block 5 ton. pmodel induf make with a load chain 10 mtr. safty chain 20 mtr. with test certificate with govt. approved test house. , s.s clamp for c / f m / c nk 1100 , s.s clamp for c / f m / c 1350 kt , rubber joint seats in standered quality size 3x6 comericial quality ( a ) size 1 / 16 , rubber joint seats in standered quality size 3x6 comericial quality ( a ) size 1 / 8 , rubber joint seats in standered quality size 3x6 comericial quality ( a ) size 1 / 4 , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( a ) size 1 / 4x1 / 2 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( b ) size 3 / 8x10 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( c ) size 3 / 8x1 / 2 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( d ) size 3 / 8x1 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( e ) size 3 / 8x2 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( f ) size 3 / 8x1 1 / 2 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( g ) size 1 / 2x1 mtr , flexible hose pipe double wire breaded rubber coated with both side nut / bsp ( a ) size 1 / 4x2 mtr , fanner make c.s. gear coupling / tyre coupling ( a ) size gc 01 , fanner make c.s. gear coupling / tyre coupling ( b ) size gc 02 , fanner make c.s. gear coupling / tyre coupling ( c ) size gc 03 , fanner make c.s. gear coupling / tyre coupling ( d ) size gc 04 , fanner make c.s. gear coupling / tyre coupling ( e ) size gc 05 , fanner make c.s. gear coupling / tyre coupling ( f ) size gc 06 , fanner make c.s. gear coupling / tyre coupling ( g ) size gc 07 , fanner make c.s. gear coupling / tyre coupling ( h ) size gc 08 , fanner make c.s. gear coupling / tyre coupling ( i ) size gc 09 , fanner make c.s. gear coupling / tyre coupling ( j ) size gc 10...

Northern Railway - Uttar Pradesh

37697599 supply of retro reflective board 300x900mm written in golden yellow and white, red tape 3mm on border on 2mm thick aluminium sheet as in is737 and frame in size 25x25x3mm angle. both side black emulsion paint 2 coat => limited...