Indian Army - Uttar Pradesh

34092125 bids are invited for cn 10309327 pack with aluminum frame ( modified ) total quantity : 4482...

Indian Army - Uttar Pradesh

33858690 bids are invited for cn 10309327 pack with alluminium frame ( modified ) ( q3 ) total quantity : 4482...

Northern Railway - Uttar Pradesh

33782747 auction sale of scrap oil / air filter with ss, iron, and aluminium frame of sorts and sizes with or without parts and fittings with nf attachment note: lbp location: lying between line no 8 and 9 in plot g...

North Eastern Railways - Uttar Pradesh

33698124 auction sale of aluminum scrap consisting aluminum strip aluminum door pipe ladder chequered plate aluminum sheet pieces coach sheet aluminum fittings and parts of electrical and diesel loco parts water tank cut up parts aluminum frame aluminum purr ail mirror frame and other various aluminum items lying in two stacks one stack behind ward no. 84 and other is near oil shed ( cutting allowed to remove ferrous and rubber attachment ) [ hsn 7602 gst 18% ] ...

Public Works Department - Uttar Pradesh

33625307 replacement of damaged window and door handle, aluminum frame work and fitting of mirror, construction of modular kitchen, replacement of g.i. pipe, civil repair maintenance work of building....

Military Engineer Services - Uttar Pradesh

33301934 provision of dental lab at 1 corps dental unit under ge ( east ) mathura as per tender documents 1 surface excavation n exc 30cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed. 2 grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site girth of tree exc 100 cm but n exc 150 cm complete all as specified and directed. 3 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying cable etc. and getting out in soft / loose soil complete all as specified and directed. 4 m&l for pcc 1:4:8 type d2 ( using 40 mm graded stone aggregate ) as in foundation filling and mass concrete complete all as specified and directed. 5 returning, filling inincluding spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed. 6 removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as directed. 7 removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and directed. 8 use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for flat rough finished surface complete all as specified and directed. 9 m&l for rccdesign mix m 25 grade, ( using20 mm graded stone aggregate ) as in foundation, footings, plinth beam and similar works complete all as specified and directed. 10 use and waste of formwork to sides of pillars, posts and columns for rough finished surface square / rectangular of concrete complete all as specified and directed. 11 m&l for rccdesign mix m 25 grade, ( using20 mm graded stone aggregate ) as in columns, pillars, piers, posts and struts &similarworks complete all as specified and directed. 12 use and waste of formwork to sides and soffits of floor or roof beams, lintiles cantilever etc for flat rough finished surface complete all as specified directed. 13 m&l for rccdesign mix m 25 grade, ( using20 mm graded stone aggregate ) as in beams, cantilevers, bressummers, lintels& similar works complete all as specified and directed. 14 use & waste of form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as specified and directed. 15 m&l for rccdesign mix m 25 grade, ( using20 mm graded stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like& similar rcc works complete all as specified and directed. 16 use & waste of form work to edges of suspended slabs n.exc 20 cm thickness for fair finished surface complete all as specified and directed. 17 demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 18 m&l for brick work with old size fly ash bricks straight or curved on plan exc 6mtr mean radius, built in cm ( 1:6 ) complete all as specified and directed. 19 m&l brick work with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm ( 1:4 ) complete all as specified and directed. 20 m&l for ms tmt bars 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. 21 m&l for ms tmt bars upto 8 mm dia as in stirrups, cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. 22 m&l for rendering 5 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. 23 m&l for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair without using extra cementincluding mixing liquid water proofing compound @ 200ml / bag complete all as specified and directed.note: liquid water proofing compound shall be measured and paid separately. 24 supply only liquid water proofing compound complete all as specified and directed. 25 m&l for 15mm thick rendering in cement mortar ( 1:6 ) on fair face of brick wall / concrete surfaces andfinished even and smooth without using extra cement complete all as specified and directed. 26 m&l for preparation of new wall surfacesand applying two coats of exterior emulsion paint ( apex ) over and including a coat of primer complete all as specified and directed. make : asian paint ( apex ultima ) or equivalent item of other specified makes. 27 m&l for preparation of plastered surface of wallsand applying two coats of oil bound distemper of any colour over and including a coat of alkali resistant primer over and including a coat of cement base wall care putty applied as per manufacturers instruction complete all as specified and directed. 28 m&l for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. 29 m&l hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed. 30 m&l for 75 mm thick plain cement concrete 1:4:8 type b2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc complete all as specified and directed. 31 s&f light shade coloured vitrified ceramic tiles 10mm thick, ( square / rectangular ) area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in cm ( 1:4 ) complete all as specified and directed. 32 m&l for glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plaster incement mortar ( 1:3 ) complete all as specified and directed. 33 m&l for 75 mm thick plain cement concrete 1:3:6, type c1 ( using 20 mm graded stone aggregate ) as in plinth protection surfaces finished even and fair without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as specified and directed. 34 m&l for 20mm thick black granite stone slab topping table rubbed and polished ( one piece ) in cooking platforms / staps, jambs, pillars, window cill laid over 15mm thick cement screed bed or bedding layer in cm ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust including rounded / half rounded edge and hole of gas pipe in pre cast slab as well as stone slab in cooking platform complete all as specified and directed. 35 s&f12 mm thick toughened glass shutters ( openable type ) , with clear glass including diamond polishingincluding all hardware fittings detailed as under, fixed in position as per manufacturer instruction complete all as specified and directed.note : ( i ) hardware fitting shall be measured and paid separately as supply only. ( ii ) cat part no of hardware fitting are of make enox. 36 stainless steel top patch ( cat no epf 701 ) 37 stainless steel top pivote ( cat no epf 712 ) 38 stainless steel bottom patch ( cat no epf 702 ) 39 glass to wall stainless steel lock ( cat no epf 799 ) 40 stainless steel floor door spring ( cat no fh eco 842 ) 41 stainless steel handle 300 mm size ( cat no esbh 011 ) 2 nos for each shutter 42 m&l for fixing collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed. 43 m&l for providing and fixing inter locking metal grid ( snap grid for false ceiling ) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections ( galvanized @ 120 gram / sqm, both side inclusive ) consisting of main “t” runner with suitably spaced joints to get required length and size 24 mm x 38 mm made from 0.30 mm thick ( minimum ) sheet, spaced at 1200 mm center to center and cross “t” of size 24 mm x 28 mm made of 0.30 mm thick ( minimum ) sheet 1200 mm long spaced between main “t” at 600 mm center to center to from a grid of 1200 mm x 600 mm and secondary cross “t” of length 600 mm and size 24 mm x 28 mm made of 0.30 mm thick ( minimum ) sheet to be interlocked at middle of the 1200 mm x 600 mm panel to form grids of 600 mm x 600 mm and wall angle of size 24 mm x 24 mm x 0.4 mm. main “t” runners to be suspended from ceiling using gi slotted cleats of size 27 mm x 37 mm x 25 mm x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanized butterfly level clips of size 85 mm x 30 mm x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t sections shall be pre painted with polyester paint, all complete for all heights as per specifications and directed. 44 s&f powder coated aluminium frame ( minimum thikness of powder coating 50 micron of approved tint / colour ) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 45 supply and fixing factory made upvc white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm ( 0.2 mm ) .windoow profile with hollow section with multi chamber.frame ( 88 mm x 52 mm ) , sliding sash ( 42 mm x 67 mm ) .sliding mesh sash ( 42 mm x 57 mm ) slide interlock ( one vertical length in each shutters ) ( 45.5 mmx 28 mm ) , glazing bead ( 24.5 mm x 16 mm ) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.epdm gasket1.2+ 0.2mm mm thick galvanized steel frame ( 30mmx18 mm ) 2 nos , sliding sash ( 30 mm x 18 mm ) , sliding mesh sash ( 26 mmx 10 mm ) profile to be inserted in required profile , frame will be fixed to wall with 8 mmx100 mm long fasteners. hardware touch lock of zinc alloyed ( white powder coated ) , steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. ( note : the unit rate quoted by contractor excludes cost of glass and stainless steel wire cloth but includes all other connected accessories.net opening will be measured for payment purpose. ) area n exc 1.00 sqm each all as specified in td no cejz / td / 2021 / s 01 sheet. 1 / 1 dt 28 jan 2020 complete all as specified and directed. 46 s&f powder coated aluminium ( powder coating shall not be less than 50 microns of approved tint / colour ) door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. 47 m&l double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. 48 supply only 5 mm sheet glass, ordinary quality and area n exc 0.5 sq. m in each pane complete all as specified and directed. 49 supply only 5.5 mm sheet glass, ordinary quality and area exc 0.5 sq. m in each pane complete all as specified and directed. 50 supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 51 m&l for framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con forming to fe.290.gde e 165 complete all as specified and directed. 52 m&l for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed. 53 m&l app based polymeric membrane not less than 3mm thick weighing not less then 3.5 kg / sqm, reinforced with polyster non woven fabric ( weighing ) not less than 150 gm / sqm ) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process, shall be used it shall be laid by torch application. side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and joint shall also be sealed by torch application. for parapets, membrane shall be taken to a height of minimum 60 cm and then inserted inside the parapet in a grooves. the same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confirming to is : 3384 @ 0.40kg per sqm complete all as specified and directed 54 blank 55 s&f 15 mm bore gi tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed.note : cutting chases for consealed tubing will be measured and paid separately in respective item of this schedule. 56 cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed. 57 s&f 20 mm bore gi tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed. 58 s&f for stainless steel sink 1 mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc over all size 495 x 420 mm with bowl size 410 mm x 330 mm x 160 mm. complete all as specified and directed. 59 s&f15mm dia bore stop valves / angle cock chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 60 s&f 15mm bore long body chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.make : jaquar cat part no fus chr 29037 or equivalent item of other specified makes. 61 s&f towel rail 600 mm long complete all as specified and directed.make:jaquar cat no.acn 1111nm or equivalent item of other specified makes as given in appendix b to particular specification. 62 s&f 32 mm dia waste pipe of min 750 mm long fixed to waste coupling and to grating complete all as specified and directed. 63 s&f 75 mm dia of outlet pvc ( swr ) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 64 s&f 75 mm pvc ( swr ) pipes type a single socketed, inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 65 s&f 110 mm pvc ( swr ) pipes type a single socketed, inanylength with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 66 supply and fix 1000 litre capacity white colour triple layer rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and fixed in position including making inlet / oulet connection and fitting tank connection complete all as specified and directed. 67 supply and fix 20 mm bore dia ball valves high pressure of ptmt with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. 68 s&f 20 mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. 69 s&f welded steel wire fabric supplied and fixed to angle frame or steel members complete all as specified weight per square metre n exc 4 kg complete all as specified and directed. 70 s&f butt hinges 100mm medium weight cold rolled mild steel including necessary welding if required complete all as specified and directed. 71 s&f 100 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. 72 s&f factory made 18mm ± 0.7 mm thick rajshri brand celuka pvc ply one side prelam and one side plain sheet kitchen cabinet shutter of density 600 kg / cum bent at 90 degree and finish all edges at level for making edge lipping / bending or 0.5mm thick pvc sheet lipping at all four edges using bonding tape etc complete all as specified and directed. 73 s&ffactory made pvc board 12 mm thick pvc celuka ply fixed with each other using solvent cement adhesive and fixed with screw etc. complete as per manufacturer specifications including dismantling of old cabinet complete all as specified and directed. 74 ms&f 18mm ± 0.7 factory made pvc shelf / partition of required size consisting of panel of celuka pvc ply and for supporting the hold of shelf / partition and shall provided 3 edges in size 18mm x 18mm as per required lengh the front size of the edge visible in the front of the shelf / partition the edge lipped by 18mm width x 1mm thick pvc sheetof density 600 kg / cum complete all as specified and directed. 75 s&f 25 mm size magnetic catches for cupboards including fixing to frame and connected plate to shutter complete all as specified and directed. 76 s&f 100mm size brass handles, cast type, polished bright complete all as specified and directed. 77 s&f continous piano hinges mild steel bright finish or electro galvanised of 40mm width of flaps ( when open ) complete all as specified and directed. 78 m&l for 100 mm thick cement concrete 1:4:8 type d2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 79 m&l for machine pressed precast conctete coloured interlocking paver block any shape and size confirming to is 15658 2006 of 80 mm thickness m 40 grade made with grey cement and pigmentwith and including laid over 25mm thick sand chshioning and joint of pavor block to be filled with same sand complete all as specified and directed. 80 s&f coloured non skid endura ceramic tiles 10mm thick, ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm ( 1:4 ) complete all as specified and directed. 81 m&l steel work in tubular trusses including special shaped washer etc complete using erw or including butt welded tubes conforming to is 1161 1979 grade st 240 complete all as specified and directed. 82 m&l for providing acrylic sheet 2 mm thick of any colour as directed fixed to steel frame work complete all as specified and directed. 83 cutting existing steel tubing of size 25 / 32mm bore for alterations or additions ( each cut measured ) done in position without taking down complete all as specified and directed. 84 screwing existing steel tubing 25mm bore for alterations or additions ( or lenghtening screw on pipe to form connector ) done in position without taking down complete all as specified and directed. 85 m&l for steel water tubes, medium grade, galvanised, with all fittings , laid in trenches fixed to wall of size 25mm dia and connecting with existing lines with suitable gi tee including testing complete all as specified and directed. 86 m&l for gun metal gate valve with iron wheel head, screwed both ends for iron pipe of size 25mm dia complete all as specified and directed. 87 m&l for 4mm thick non asbestos fiber cement building boards fixed or laid / inserted on frame work fixed in ceiling complete all as specified and directed. 88 m&l for antitermite treatment by treating the bottom and sides of excavation at the rate of 5 liters of emulsion per sqm of surface area complete all as specified and directed. 89 m&l for antitermite treatment by treating the top surface of filled earth at the rate of 5 liters of emulsion per sqm of surface area complete all as specified and directed. 90 m&l for antitermite treatment by treating the soil under plinth protection at the rate of 5 liters of emulsion per sqm of surface area complete all as specified and directed. 91 m & l for point wiring with 1.5 sqmm ( nominal area ) single core pvc insulated unsheathed ( frls ) cable, multi stranded, copper conductor, inuniversal colour code with & including suitable size of rigid non metallic pvc conduit ( not less then 20mm dia med gd ) and its all accessories complete concealed in wall / roofincl cutting & chases ( making good all to the disturbed surfaces as per existing ) and modular flush metal boxessuitable for modular fittings including modular cover plate with framefor mounting modular switches, sockets, etcincluding earth wire ofpvc insulated ( frls ) copper conductor multistrandedof 1.5sqmmsize in green colour complete all asspecified in current ssr part i & ii & directed by the engineer in charge , as described below: 92 one light point controlled by one way switch 6 amp complete. 93 oneceiling fan / exhaust fanpoint controlled by one way switch 6 amp complete. 94 one 3 pin 5 amps socket point controlled by one switch on independent board. 95 one 3 pin 5 amps socket point controlled by one switch on same board. 96 all as per item no. 85.00 butfor 3 pin / 5 pin 16 amps sockets outlet with 4 sqmm pvc insulated & unsheathed ( frls ) copper conductor cable independent complete all as specified and as directed . 97 supply and fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and directed. 98 supply and fixingmodular switch 6 amps single pole one way, 1 module complete all as specified and directed. 99 supply and fixingmodular switch16 amp single pole one way, 2 module with indicator complete all as specified and directed. 100 supply and fixing modularsocket2 in 1, 5 pins 6 amps , combined 2 modulecomplete all as specified and directed. 101 supply and fixingmodular socket 2 in 1, 3 and5 pins 6 / 16 amps, combined 2 module complete all as specified and directed. 102 supply & fixing modular fan regulator electronic step type 120watt, 2 module complete all as specified and directed. 103 supply & fixing indoor decorative ultra slim surface / wall mounted t5 ledbatten tube light complete fitting 1x 20 watt led tube fittingwith polycarbonate channel housing & integrated electronic driver, energy efficient, 140v 270 volts, complete all as specified and directed by enginee in charge.make:havells ( as per cat part no: lumilinebs20wled 865 spc wh ) or equivalent item of other specified makes as given in appendix b to particular specification. 104 s&f mcb distribution board, spn 8 way, double door, sheet steel, phosphatised, powder painted with copper bus bar 200amp, neutral link, earth bar and din rail , cable ties for cable management, 240 v, complete all as specified and directed. 105 supply & fixing mcb sp 6 32 amps, b series , bracking cap10ka complete all as specified and directed. make : havells or equivalent item of other specified makes as given in appendix b to particular specification. 106 supply & fix mcb dp 63 amps, c series , bracking cap10ka, 240v complete all as specified and directed.make : havells or equivalent item of other specified makes as given in appendix b to particular specification. 107 supply and install of 30w led building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainablewith heat resistance toughened glass, built in short circuit protection, over voltage protection and surge protection, ip 65 protection with luminaire efficiecy of greater than 80lumen / watt, colour rendering ( cri ) of = 70 and co relatedcolour temperature ( cct ) of 5700k ( ±500k ) . the luminaire should have 10 kv surg protection, pf= 0.9 and total harmonic distortion of thd = 10%, voltage range of 140 280vincluding all connections complete all as specified. make of fitting : havells cat part no : enduracityliteplat plussl30wled757sasybopc or equivalent item of other specified makes as given in appendix b to particular specification. 108 m&l for building securitylight bracket made out of 40mm dia light grade gi pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on steel tubularpole including two nos clamps made out 40mm x 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as specified and directed . 109 m&l for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, rcc cover with concrete 1:2:4 using 8 mm dia bar@100 mm c / c both ways, ms handle 12mm dia for pcc chamber pit with pcc ( 1:3:6 ) type c 2 and excavation and earth work in hard / disintegrated rock all as specified and shown on electrical plate no. 3 of 2009 ( part i ) and connected to earth test point including testing complete all as specified and directed.note : the unit rate includes for protection pipe and gi wire 4mm dia from top of earth plate up to 7.5 meter above ground level. 110 m&l for galvanized iron tubes 15mm bore light grade confiming to is 1239, laid in trenches or alongwall for protection earthing lead from mechanical injury or tapmpering complete all as spcified and directed. 111 m&l for gi earth lead 4mm burried in ground / fixed on walls complete with fixing screws, nut, bolts etc complete all as specified & directed. 112 s&f tp&n vertical loadline distribution board, 4 way, double door, sheet steel, phosphatised, powder painted with copper bus bar 200 amp, neutral link, earth bar and din rail, blanking plates, cable ties for cable management, 440 v, 4 way complete all as specified and directed including fitting with following mccb & mcbs with connections : ( i ) mccb 100 amps, 4 pole, 16ka 01 nos ( ii ) mcb sp 63 amps 04 nosnote : mccb, mcbs & mcb db shall be of the same make. mcb dbs shall be fixed on wall in flush pattern by cutting the wall and making good disturbed surfaces. 113 supply and fix ceiling fan 1200 mm sweep, energy saving models, pearl white / white in colour 350 rpm, 220 volt 50 hz complete with canopy, down rod. fan blade, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by enginee in charge. make : havells ( model no es 40 ) or equivalent item of other specified makes as given in appendix b to particular specification. 114 supply and fix modular power socket 16 amp unit protected with 16 amp sp mcbincluding with sheet enclosuer complete all connection complete all as specified and directed. make : havellsas per cat part no dhdmcsn0251016or equivalent item of other specified makes as given in appendix b to particular specification. 115 m&l for submain wiring with 2 runs of single core 4 sqmm pvc insulated unsheathed multistranded 1100 volts grade with frls copper conductor drawn through and including isi marks pvc conduit concealed and conduit accessories of medium grade not less than 20mm dia including one run of single core 4 sqmm frls pvc insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth conductor along with wiring and connected from db to db / main board complete all as specified and directed.note : two run of 4 sqmm cable and one run of 4 sqmm earth cable and one run of 20mm pvc conduit shall be considered as a unit for measurements purpose. 116 m&l submain wiring with 2 runs of single core 6 sqmm pvc insulated unsheathed multistranded 1100 volts grade with frls copper conductor drawn through and including isi marks pvc conduit concealed and conduit accessories of medium grade not less than 20mm dia including one run of single core 6 sqmm frls pvc insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth conductor along with wiring and connected from db to db / main board including taking down old unserviceable submain wiring complete all as specified and directed.note : two run of 6 sqmm cable and one run of 6 sqmm earth cable and one run of 20mm pvc conduit shall be considered as a unit for measurements purpose. 117 supply and fix storage type water heater ( geyser ) of 15 litres capacity, 5 star rating, 2kw rated power, incoloy glass coated heating element, thermostat cutout temperature ( ºc ) , adjustable knob for temp setting , vertical type , to operate on single phase, 230 volts, 50 hz ac supply & complete with all safety controls including provision of suitable bolts, nuts, washers and grouting on walls and making good the disturbed surfaces to match with the existing sufaces and provision of suitable pvc flexible pipe for hot & cold connection, chromium plated brass check nuts for cold & hot water lines and one no. non return valve of suitable sizecomplete installation with testingall as specified and directed 118 supply, laying and testing cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 25 sq mm 4 core, laid in trenches / duct / fixing on walls / poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testingincluding connecting with suitable lugs, glands, nuts and bolts in existing panelfrom pole / main panel box and testing complete all as specified and directed. 119 m&l for hdpe double wall corrugated pipe of size 40mm outer dia and 32mm inner dia confirming to is:14930 part iiincluding necessary pipe fittings such as couplers, end caps, bend etc. laid in trenches / fixed to wall with suitable clamps for cable protection complete all as specified and directed. 120 supply, install & testing hi wall split air conditioning units of capacity 1.5 tr complete with indoor & outdoor unit with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum bee 4 star rating and eer 3.2including outdoor mounting stand complete all as specified and directed. make daikin or equivalent item of other specified makes. 121 s&f wall mouunted indoor voltage stabilizer automatic operation single phase , naturally air cooledand disigned for input variation between 130 v to 300 volt with output voltage stabilized at 230 v with accuracy of + 2.5% and of capacity 3800va. make v guard as per model vgb 500 or equivalent item of other specified makes. 122 supply and fix dp enclosure with a two pin and earth plug and socket complete with dp mcb of rating 20 amps, 240 volts complete with all conction as directed....

Kanpur Electricity Supply Co Limited - Uttar Pradesh

33274547 annual maintenance and repair works of kesa house kesco, kanpur. 2 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer in charge within a distance of 60 metre ( csi no. 15.01 ) 3 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by theengineer incharge within a distance of 60 metres. ( csi no. 15.03 ) 4 dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the engineer in charge within a distanceof 60 metres. ( csi no. 15.05 ) 5 dismantling existing plaster including disposal of refuse asdirected by the engineer i / c within a distance of 60 m. ( csi no. 15.11 ) 6 scrapping old white or colour wash or distemper including disposal of refuseas directed by the engineer i / c within a distance of 60 m. ( csi no. 15.12 ) 7 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. ( csi no. 4.01 ) 8 clearing jungle including uprooting of rank vegetations, grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of uppcl area cleared. ( csi no. 4.08 ) 9 local fine sand of 1.25 f.m. filling in plinth including supply of necessary quantity of sand from ariver / canal nearest to the site of work including watering, ramming and dressing etc. rate to include cost of all materials, labour and t&p etc. required for proper completion of work. ( kda apprd. ) 10 concrete with 4cm gauge i class brickballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. ( csi no.5.01 ) 11 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. . ( csi no. 5.23 ) 12 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 3:1.5:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work ( csi no. 5.21 ) 13 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in foundation and plinth including supply of allmaterials, labour & t&p etc. required for proper completion of work. ( csi no. 6.01 ) 14 first class brick ( class 150 ) work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in super structure of one brick thick wall including supply of all materials, labour & t&p etc. required for proper completion of work. ( csi no. 6.01+6.08 ) 15 first class brick ( class 150 ) work in 1:4 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in super structure of 1 / 2 brick thick wallincluding supply of all materials, labour & t&p etc. required for proper completion of work ( csi no. 6.03+6.09 ) 16 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. ( csi no. 11.09 ) 17 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand ( 1:4 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. ( csi no. 11.07 ) 18 add for extra labour and materials for plaster over rough face ofone brick thick wall. ( csi no. 11.12 ) 19 brick work in foundation & plinth with old dismantledbricks ( supplied by department free of cost ) and coarse sand of f.m. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks, t&p etc complete. ( csi no. 6.18 ) 20 same as in item 6.18 above butin super structure for 230 mm thick wall. ( csi no. 6.19 ) 21 dismantling doors or window leaves including stacking ofmaterials as directed by the engineer i / c within a dist. 60 m. ( csi no. 15.09 ) 22 dismantaling doors and windowschowkhatsincluding stacking of materials as directed by engg in charge within a distance of 60 meters. ( csi no. 15.10 ) 23 supply of 80 mm thick i shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200x ( 160+120 mm ) with minimum 5 mm thick toping of o.p.cement mixed with 25% marble powder. the compressive strength of concrete pavers blocks shall not be less than 30 mpa & 4.5 kg / no. including cost of all material, labour, t&p etc. required for proper completion of work as directed by engineer in charge but execluding u.p.t.t. which shall be paid extra as per rules. ( csi no.12.23 ) 24 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part 1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts.locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. ( csi no. 8.57 ) 25 as in item no. 8.57 but for 40 mm. thick single leaf flush door shutter. ( csi no. 8.58 ) 26 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. ( csi no. 9.01 ) 27 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) ( csi no. 9.03 ) 28 mild steel or iron work in purlins and rafters includingdrilling holes and fixing in position and including supply of allsteel and bolts and nuts, wastage labour and t&p etc required forproper completion of the work. steel shall not be supplied by department . ( csi no. 9.05 ) 29 providing barbed iron wire fencing including fixing in postafter straightening it including labour and t&p etc. requiredfor proper completion of the work but excluding supply of postsand wire. ( labour rates only ) . ( csi no. 9.06 ) 30 dismantling existing barbed wire fencing including making bundlesand stacking etc.complete. ( labour rates only ) . ( csi no. 9.06a ) 31 providing and fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and t&p required for proper completion of work. the weight of hot dipped gi barbed wire having 12 swg 2 ply wires and 4 point ordinary barbs @ 150 mm ( approx ) c / c should be 100 gm per meter. ( csi no. 9.07 ) 32 repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm. ( 3 / 8 ) depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and t&p etc. required for proper completion of the work . ( csi no. 20.02 ) 33 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work. ( cement consumption 0.044 bag / sq.m. ) ( csi no. 11.20 ) 34 providing ( 12x15 ) mm section groove in plasterincluding all material, labour andt&p etc. required for proper completion of the work. ( csi no. 11.16 ) 35 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. ( csi no. 13.20 ) 36 applying birla putty or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ici or equivalent brand for smoothining and leveling of the surface as per requirement and direction of e / i including cost of all material , labour and t&p required for proper completion of work. ( csi no.13.21 ) 37 one priming coat and one coat oil bound distemper on new work includingsupply of all materials, labour and t&p etc. required for propercompletion of the work. ( csi no. 13.08 ) 38 as in item 13.08 but for every coat after the first coat. ( csi no. 13.09 ) 39 as in item 13.08 but for every coat on previously old oil bound distemper surface. ( csi no. 13.10 ) 40 painting one coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including through washing with water including cost of all materials, labour, t&p required for proper completion of work. ( csi no. 13.22 ) 41 same as in item no 13.22 above but for every coat of additional apex or equivalent brand weather coat paint . ( csi no. 13.23 ) 42 same as in item 13.22 but for each coat ofapex or equivalent brand weather coat paint .on previously treated surface. ( csi no. 13.24 ) 43 painting one coat with acrylic emulsion paint of berger / asian / ici or equivalent paint ( paint and water in the ratio 1:1 by volume ) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and t&p etc required for proper completion of the work, ( preparation of base with birla putty etc. and a coating of primer shall be paid extra ) . ( csi no. 13.25 ) 44 same as above in item no. 13.25 but for every coat after first coat of acrylic emulsion paint of berger / asian / ici or equivalent paint. ( csi no. 13.26 ) 45 same as above in item no. 13.25 but one coat of acrylic emulsion paint of berger / asian / ici or equivalent paint on previously painted surface. ( csi no. 13.27 ) 46 finishing walls with water proof cement paint of approved madelike super snowcem or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work. ( csi no. 13.17 ) 47 same as in item 13.17 but for each coat of water proof cement paint after the first two coats to give an even shade. ( csi no. 13.18 ) 48 same as in item 13.17 but for each coat of water proof cement paint. on previously treated surface. ( csi no. 13.19 ) 49 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and givingthem a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. ( csi no. 12.02 ) 50 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. without base cc ( csi no. 12.04 ) 51 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 12.11 ) 52 same as 12.18 above but for providing and fixing 8 mm thick vitrifiedtiles in flooring or skirting with adhesive of approved quality on existing smooth floor including cost of all material, labour and t&p required for proper completion of the work. ( csi no. 12.19 ) 53 providing and laying floor of 10 mm thick vetrified tiles ( standerd quality ) in flooring or skirting of approved brand ( bell, johnson or equi. make ) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and t&p required fo ( old csi no. 12.18 ) 54 providing and laying of 16 mm thick granite ( black / brown ) inflooring or skirting , of approved shade, colour, size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and t&p required for proper completion of the work, as per direction of engineer incharge. ( csi no.12.20 ) 55 providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite work ( csi no. 28.19 ) 56 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.17 ) 57 fixing of departmental doors & windows shutters including supply& fixing of hinges and other fixtures. ( excluding their supply ) including all materials, labour & t&p etc. required for proper completion of work. ( csi no. 8.51 ) 58 p / f fully anodized aluminium fixed glazing with hindalco or equivalent extruded standard sections14gauge ( 2.41mm thick ) of various cross sections and joints mitred and jointed as shown in drawingincluding providing & fixing 5.5 mm thick toughened glass with neoprene beading & aluminium glazing clips all around. the minimum thickness of anodizing on all aluminiumsections should be 20 microns with a ( + ) 2 microns tolerance . the rate should include the cost of fixing the aluminum frame on teak wood frame or finished wall ( rb / rcc / masonry ) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c / c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of teak frame but including cost of all other material, labour, tools & plants etc. complete. ( csi no. 8.52 ) 59 same as above item no. 8.52 but for openable window portion as shown in drawings, including cost of aluminium hinges and all other fittings like concealed towerbolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. ( csi no. 8.53 ) 60 same as in item no. 8.52 but for openable gate / door portion as shown in drawings including cost of hinges and aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. ( csi no. 8.54 ) 61 s / fixing of double action floor springs including cutting in floors / rcc slabs and grouting the same with c.c. & finishing the surface properly as and where required under aluminium doors as per direction of engineer in charge.including cost of all other material, labour, tools & plants etc. complete. ( csi no. 8.55 ) 62 as in item no. 8.55 but for single action floor springs. ( csi no. 8.56 ) 63 s / f galvanized mosquitos proof heavy quality iron wire gauge ( 14x24 ) over window frames and including supply of shishum wood battens 8cm x 1cm ) and including supply and fixing of necessary screws, all materials, labour andt&p etc. required for proper complete. ( csi no. 8.44 ) 64 as in item 8.43 above butwith country woodbattens 8cm x 1cm. ( csi no. 8.45 ) 65 additional cost for fixing glass panes with c.p. teak woodbeadinginstead ofputtyincluding cost of materials, labour andt&petc. required for proper completion of the work. ( csi no. 8.07 ) 66 indian sal wood wrought framed and fixed including simple, mouldings straight work as in chaukhats including supply of allmaterials, labour and t&p etc.required for proper completion ofthe work. ( csi no. 8.03 ) 67 supply and fixing of 3.5 cm. thick shisham wood fully panelled door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and / or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws ( glass panes to be 4 mm thick. ) . ( csi no. 8.23 ) 68 as in item 8.22 above but 35 mm. thick shishum woodfully glazed. ( csi no. 8.24 ) 69 providing and fixing 19.00 mm thick ply board / block board for wardrobe shutter etc. of reliance or scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluidng their supply and including cost of all material labour, t&p etc. required for the proper completion of the work. ( old csi 8.25 ) 70 p / fof 6.0mm thick water proof commercial quality plywood in partition work to make 5x4mm size groove at specified intervals. ply shall be fixed by means of glue and headless nailsat 100mm c / c complete. cost including all labour, material, t&p required for proper completion of work. ( old csi 8.30 ) 71 extra for providing and fixing flush doors and partitions with teak vineering / sunmica of approved quality as per specification or directed by e / i. including cost of all material labour, t&p etc required for proper completion of work. ( old csi 8.27 ) 72 supply and fixing 24 b.w.g , g.c. iron sheet roofing .fixed in position with j or u bolts 10 mm. dia with g.i. limpet & bitumen washers including supply of all materials, labour, wastage. and t&p etc. required for proper completion of the work. ( csi no. 10.01 ) 73 providing and fixing 15 mm dia b class jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi no. 26.01 ) 74 same as in item no. ( 26.01 above but for 20 mm dia. ( csi no. 26.01 ( b ) ) 75 same as in item no. ( 26.01 above but for 25 mm dia. ( csi no. 26.01 ( c ) ) 76 same as in item no. ( 26.01 above but for 32 mm dia. ( csi no. 26.01 ( d ) ) 77 supply & fixing of cpvc pipe 20mm ( chlorinated polyvinyl chloride ) having thermal stability for hot and cold water supply including all cpvc plan, bras thread fitting and required labour etc. complete in all respect. ( dsr 18.8.2 ) 78 supply & fixing of cpvc pipe 15mm ( chlorinated polyvinyl chloride ) having thermal stability for hot and cold water supply including all cpvc plan, bras thread fitting and required labour etc. complete in all respect. ( dsr / 18.8.1 ) 79 providing and fixing full way 15mm dia g.m. gate valve with wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.04a ) 80 providing and fixing full way 20mm dia g.m. gate valve with wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.04b ) 81 providing and fixing full way 25mm dia g.m. gate valve with wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.04c ) 82 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completioon of work. ( csi no. 26.12 ) 83 providing and fixing pvc ball float valve 15 mm dia. with brass & union complete, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.06 ) 84 supply and fixing pvc nahani trap india make of heavy approved quality complete with ci grating, includingsupply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 27.21b ) 85 providing and fixing ci grating 100 mm dia includingall materials, labour cartage t&p etc.required for proper completion of the work. ( csi no. 27.25 ) 86 providing and fixing in position 32 mm. dia p.v.c.waste pipe for wash basin. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.14 ) 87 providing and fixing 10 litres low level pvc flushing cistern, complete with all fittings including supply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 27.12 ) 88 providing and fixing plastic seat covercomplete with plastic lid for european type wc isi markedincluding supply of all materials, labour and t&p etc.complete. ( csi no. 27.04 ) 89 providing and fixing 100 mm dia pvc p or s trap including cement concrete and all materials, labour cartage t&p etc.required for proper completion of the work. ( for w.c. ) ( csi no. 27.24 ) 90 providing and fixing stainless steel sink 610x450x200 mm heavy quality ( isi marked ) includingall materials, labour cartage t&p etc.required for proper completion of the work. ( csi no. 27.26 ) 91 providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete ( cpwd 17.33 ) 92 providing and fixing pvc connection pipe, 300x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. ( csi no. 26.09 ) 93 providing and fixing in position 32 mm. dia p.v.c. flush pipe. for w.c. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.13 ) 94 providing and fixing of 15 mm dia c.p.brass angle valve of heavy quality l&k or equiv. make including supply of all materials, labour and t&p etc. required for proper completion of the work. ( csino. 26.16 i ) 95 providng and fixing 15 mm dia c.p. brass stop cock ofl & k or equivalent make including supply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no26.16c ) 96 providing and fixing first quality white glazed orissa pattern w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete. ( csi no. 27.01 ) 97 as in item no. 27.01 but of european type. ( csi no. 27.02 ) 98 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. ( csi no. 27.08 ) 99 providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings ( cpwd 17.08 ) 100 providing and fixing 15 mm nominal cp brass single lever telephonic wall mixer of of l&k or equivalent quality & make as approved by engineer in charge. ( csi no. 26.16g ) 101 c.p.brass telephonic shower heavy quality ( l & k and equi. ) ( csi no. 26.16h ) 102 providing and fixing 600 mm x 450 mm beveled edge mirror of atul, kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.15 ) 103 thorough cleaning of pvc tank with bleaching powder and rubbing inside surface of oht with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of e / i including cost of all materials, labour and t&p etc. required for completion of wrok. ( oldcsi 22.38a ) 104 cutting down trees ( exceeding 30 cm. grith ) grubbing uproots, filling pits and levelling off ground, lopping branchestrimming removing ( not exceeding 50 metres ) and stackingserviceable materials and cleaning side. ( csi 22.12a ) 105 cleaning of inspection chamber including disposal of waste out side the uppcl area as per direction of the engineer in charge including cost of all labour, t&p etc.required for proper completion of the work. ( csi no. 20.13 ) 106 supply and fixing of chromium polished iron fitting with screws for doors and windows etc. a to l ( old csi 8.17 a to l ) 107 l drops 16 mm dia x 300 long. 108 tower bolts 10 mm dia x 250 mm long. 109 tower bolts 10 mm dia x 100 mm long. 110 iron hinges 100 mm size.12 gauge.thick 111 iron door spring. 112 m.s.handles 100 mm size 113 m.s. chain kunda. 114 l drop 16 mm dia x 200 mm long. 115 s / f of25 mm dia decorative curtain rod with decorative end caps, matching curtain rings, including fixing with necessary clamps, pvc gully, steel screws etc. complete. ( old csi 8.19 ) 116 providing and fixing false ceiling at all heights with integral densifiedr armstrong false ceiling tiles of size 595x595 x12 mm of approved texture, design and patterns having nrc ( noise reduction coefficient ) of 0.50 ( minimum ) as per is 8225:1987, light reflectance of 85% ( minimum ) . non combustible as per bs:476 ( part 4 ) , fire performance as perbs:476 ( part 6 &7 ) , humidity resistance of 100%, thermal conductivity < 0.043 w / m k as per astm 518:1991, in true horizontal level suspended on interlocking metal powder coated t grid of hot dipped galvanised iron section of 0.40 mm thick on silhouette profile, rotary stiched double webbed white with 6 sub head : 26 new technologies and materials 1632 mm reveal profilewhite / black ) , comprising of main t runners of size 15x42 mm of length 3000 mm, cross t of size 15x42 mm of length 1200 mm and secondary intermediate cross t of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items ( galvanizing @ 80 grams per sqm ) i.e. 50 mm long, 8 mm outer diameter m 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and l shape level adjuster of size 85x25x2 mm. galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall s.s screws. the work shall be carried out as per specifications, drawing and as per directions of the engineer in charge. 26.23.1 with 12 mm thick armstrong miniralfobre sound absorbing sheet. ( csi no. 28.30 ) 117 providing and fixing anodised alluminium grill ( anodised transparant ) or dyed to required shape according to is 1868 with minimum anodic coating of grade ac15. ) of approved design / pattern with approved standard section and fixed to the existing window frame with cp brass / stainless steel screw @200mm centre to centre including cutting the grill proper opening size for fixing and operation of handle and fixing approved anodised alluminium standard section arround theopening , all complete as per requirement and direction of engineer in charge ( only weight of griil to be measured for payment ) 118 supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, t & p etc. required for proper completion of the work. ( csi no. 8.60 ) 119 supply and fixing of 5 blade exhaust fan ventile air dx 225 mm of havellsor equivalent make including all material, t&p etc required for proper completion of work as approved by engineer in charge. ( csi no. 28.38 ) 120 supply & fixing chord less call bell of approved quality as per direction of engineer in charge. ( nsi ) 121 supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, t & p etc. required for proper completion of the work. ( csi no. 8.60 ) 122 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) , total coated thickness with zinc coating 120 gm per sqm as per is:277 in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ( dsr 12.5 ) 123 cleaning and sweeping of roof of residence as and when required including uprooting of rank vegetation and disposal of the garbage upto 50 m. ( csi no. 22.20 ) 124 attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below. ( csi 22.18 ) 125 ( b ) job attending by one no. plumber / welder / mason / carpenter with two no. helper per hour or part of an hour. 126 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge ( cpwd 17.16a ) 127 providing and fixing false ceiling with 12mm thick plain / semi perforated or with design ceiling tiles of bwp type phenol formaldehyde synthetic resin bonded pressed particle board conforming is:3087 finished with a coat of aluminium primer on both sides & edges and tow coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodized aluminium ( with 15 micron anodic coating ) t sections 35x15x1.5mm size main runners and cross runners 23.5x19x1.5mm fixed to main runners placed 600mm square. the frame work shall be suspended from ceiling by level adjusting hangers of 6mm diameter m.s. rod fixed to roof slab by means of ceiling cleats. the suspenders shall be placed 600x1200mm center to center including fixing to the frame with c.p. brace screws and applying a priming coat of zinc chromate yellow primer ( aluminium frame work shall be paid separately ) ( revsed rate 27.92 / 2014 / old c.s.i. no. 16.03 ) . 128 providing and fixing double scaffolding system ( cup lock type ) on the exterior side, upto seven story hight made with 40 mm dia. m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer in charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding. ( nsi ) ...

Dakshinanchal Vidyut Vitran Nigam Limited - Uttar Pradesh

32982809 20 / ecc ( d ) ag / 2022 23 20 / ecc ( d ) ag / 2022 23 , supply of executive table size 72x36x30 with modular specifications such as under the structure of table should made up to good quality wood frame and table top should be of superior quality 25mm thick laminated board with high quality 1mm thick decorative lamination, pull out box on right side convenient three layer drawer storage with proper sliding arrangement, left side openable shutter with two step compartment with nylon rolls with locking arrangement also pedstal arrangement. as per standard specification of manufacturer. , supply of executive chair geeken ( model gp 147 ) / stallar / delite or equivalent make adjustability of seat height upto 150mm with specifications such as revolving and lilting type , high back, full 360 degree swivel mechanism, arm chair with 5 prong pedestal to ensure balance and stability with wheel casotrs having base of good quality steel frame, seat and back should be cushioned with minimum 75 mm foam rubber and upholstered with leatherite tapestry of approved quality. all chrome plated polish should have smooth, scratch resistant long lasting finish as per standard specification of the manufacturer. , supply of visitor chair geeken ( model gm 211 ) / stallar / delite or equivalent makewith specifications such as fixed type arm chair, having base of powder coated steel pipe frame, seat back should be cushioned with minimum 75 mm foam rubber upholstered with leatherite of approved quality. all chrome plated polish should have smooth, scratch resistant long lasting finish as per standard specification of the manufacturer. , rack slotted angle steel sized 78x36x15 with six compartment made up 20 gauge sheet with 25x6mm ms flat support with coat of synthetic furniture enamel paint complete. , supply of almirah size78x36x 19 with 18 gauge door, 20mm gauge, cold rolled m.s sheet powder coated body having 5 compartment with locking arrangment unitech or equivalent makeas per standard specification of the manufacturer. , supply of almirah size54x36x 19 with 18 gauge door, 20mm gauge, cold rolled m.s sheet powder coated body having 4 compartment with locking arrangment unitech or equivalent makeas per standard specification of the manufacturer. , supply of stellar executive l shape table ( size 1500 / 600 w x 1200 / 500 d x 760 h ) model no oz 945 15 ber or equivalent with specifications such structure of table should made up of good quality wood frame and table top should be of superior quality 70 mm thick dermatoglyph melamine board and pull out tray ( wenge ) of approved quality, 3 drawers pull out box on right side for convenient storage with proper sliding arrangement using nylon rolls with locking arrangements and side return structure made with 25 +18 mm thick mfc, unit mounted on nylon castors as per standard specification of the manufacturer. . , supply of stellar filling cabinet ( size 1000 w x 400 d x 634 h ) model no oz 710 or equivalent with 25mm thick mfc below 750mm levels and alluminium frames dualcolour with black painted glass shutters above as per standard specification of the manufacturer. , supply of stellar office table ( size 1380w x 690 d x 720 h ) model no oz 764+ 788+oz 756or equivalent with specifications such as the under structure of table should made up of good quality wood frame and table top should be of superior quality 25 mm thick laminateddoard with high quality 1 mm thick decorative lamination and pull out box on right side for convenient storage with proper sliding arrangement with nylon rolls with locking arrangements as per standard specification of the manufacturer....

Department Of Animal Husbandry Dairying And Fisheries - Uttar Pradesh

32979283 supply of filters for hvac plant system at ccs national institute of animal health, baghpat ( u.p ) supply of filters for hvac plant system at ccs national institute of animal health, baghpat ( u.p ) , certified and validated, pre filters, eu 4, construction made out of aluminum frame flange type for ahu, efficiency 90% down to 10 micron. media washable non woven synthetic media support by aluminum frame mesh finish with hdpe mesh on other side. each filter will be inspected individually for dimension and overall rigidity. each filter may also be inspected individually for air flow capacity at the premises of supplier at his own cost , 610mm x 610mm x 200mm , 610mm x 305mm x 200mm , 610mm x 305mm x 50mm , 610mm x 610mm x 50mm , 305mm x 305mm x 50mm , certified and validated, fine, eu 8 construction made out of aluminum frame flange type for ahu, efficiency 99% down to 3 micron. media washable non woven synthetic media support by aluminum frame mesh finish with hdpe mesh on other side each filter will be inspected individually for dimension and overall rigidity. each filter may also be inspected individually for air flow capacity at the premises of supplier at his own cost , 610mm x 610mm x 300mm , 610mm x 305mm x 300mm , certified and validated, hepa filters. scope of offer covers manufacture, testing at works, packing and delivery of hepa filters to site as per following specifications: hepa filters eu 13 construction made out of aluminum frame ( flange type ) high flow for ahu efficiency 99.97% down to 0.3 micron. media imported submicronic fiber glass paper. , 610mm x 610mm x 300mm , 610mm x 610mm x 150mm , 610mm x 305mm x 300mm...

Indian Army - Uttar Pradesh

32737820 bids are invited for cn knd/niv/cl2/7 pack with alluminium frame(modified)auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. (a maximum of10 times) total quantity : 1089...

Department Of Technical Education - Uttar Pradesh

32696353 bids are invited for providing and fixing aluminium work for doors, windows, ventilators and partitions , shutters of doors, windows and ventilators , providing and fixing 12 mm thick prelaminated particle board , providing and fixing glazing in aluminium door, window, ventilator shutters and partitions , providing and fixing aluminium die cast body tubular type universal hydraulic door closer , filling the gap in between aluminium frame and adjacent , providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles , providing and fixing aluminium round shape handle of outer dia 100 mm with ss screws , providing and fixing aluminium hanging floor door stopper, isi marked, anodised , providing and fixing aluminium tower bolts, isi marked, anodised , providing and fixing anodised aluminium grill ...

Army Public School - Uttar Pradesh

32583658 annual contract of printing work services. annual maintenance contract of it equipment. annual contract of photographer services. annual maintenance contract of epbax systems. conversion of open space near server room in to class room by aluminum frame and acp sheet along with material and labour. purchase of modular student furniture qty 230 (two seater dual desk and chair)....

Indian Army - Uttar Pradesh

32537071 bids are invited for cn knd / niv / cl2 / 7 pack with alluminium frame ( modified ) ( q3 ) total quantity : 1089...

North Central Railway - Uttar Pradesh

32495942 supply of set of spare for bl box consist of 3 item 10 no.set of spare for bl box consist of 3 item 10 no.,set of spare for bl box consist of 3 item 10 no. as under (1) name plate for driver desk (bl box) as per drawing no. elw/bsl/wam 4/3/90.093r (leaveblpv (vaccume pump) blank & replace blqpv (exhauster high speed) with additional blrdj on plate)=01 no. (2) aluminium frame of bl box as per drg. no. jhs/trs/3/sk 327=01 no. (3) stainless steel c.s.k screw size m3x8mm = 8 no. note: one sample should be got approved before bulk supply....

North Central Railway - Uttar Pradesh

31996620 supply of set of spare for bl box consist of 3 item 10 no.set of spare for bl box consist of 3 item 10 no.,set of spare for bl box consist of 3 item 10 no. as under (1) name plate for driver desk (bl box) as per drawing no. elw/bsl/wam 4/3/90.093r (leaveblpv (vaccume pump) blank & replace blqpv (exhauster high speed) with additional blrdj on plate)=01 no. (2) aluminium frame of bl box as per drg. no. jhs/trs/3/sk 327=01 no. (3) stainless steel c.s.k screw size m3x8mm = 8 no. note: one sample should be got approved before bulk supply....

Department of Defence Production - Uttar Pradesh

31802110 bids are invited for epoxy powder coating black of aluminium frame for synthetic web equipment pack ick as per terms & co ( q3 auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( a maximum of300 times ) total quantity : 67129...

Development Commissioner Handicrafts - Uttar Pradesh

31798320 inviting expression of interests (eois) for empanelment of suppliers for supply of handlooms/handloom accessories etc. supply of handlooms/handloom accessories etc. to the weavers under hathkargha samvardhan sahayata (hss) in the districts varanasi, chandauli, mau, azamgarh, gorakhpur, barabanki, sitapur, hardoi and kanpur of uttar pradesh under nhdp , handlooms: , frame loom 56” banarasi poles: size 3.5” x 4” (seasoned wood) pole height – 6 feet cloth beam 4” diameter, (shakhu wood) warp beam 4” diameter, (shakhu wood) sley(for 54” banarasi loom made of shakhu wood) jacquard mounting frame 1 no. 5 wheel take up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame along with gulla set of 4 frames (suitable for 54” handloom for banarasi silk weaving) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 56” suitable for dury/stole weaving poles: size 3.5” x 4” (seasoned wood) pole height – 5.75 feet cloth beam 4” diameter, (shakhu wood) warp beam 4” diameter, (shakhu wood) sley (for 54” dury handloom made from shakhu wood) 5 wheel take up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame with wire healds set of 4 frames (with 2000 wire healds, suitable for duri weaving on 56” handloom) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 72” suitable for dury/stole weaving poles: size 4” x 4” (seasoned wood) pole height – 5.75 feet cloth beam 4” diameter, (shakhu wood) warp beam 4” diameter, (shakhu wood) sley (for 60” dury handloom made from shakhu wood) 5 wheel take up motion – 1 set treadles(set of 4 pcs) – 1 set tighteneror phalli (set of 2 pcs) – 1 set heald frame with wire healds set of 4 frames (with 2000 wire healds, suitable for duri weaving on 72” handloom) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , frame loom 102” suitable for fabric/bedsheet weaving poles: size 4” x 4” (seasoned wood), pole height – 5.75 feet cloth beam 4” diameter, (shakhu wood), warp beam 4” diameter, (shakhu wood), sley (for 90” fabric/bedsheet handloom made of shakhu wood), 5 wheel take up motion – 1 set, treadles(set of 4 pcs) – 1 set, tighteneror phalli (set of 2 pcs) – 1 set, heald frame with wire healds set of 4 frames (with 3000 wire healds, suitable for fabric/bedsheet weaving on 102” h/l) – 1 set note: entire loom made from “chid wood” and shuttle boxes of sisham wood is also acceptable. , front pole for slay mounting 2 pieces, 4’’x4’’x5 feet front pole 2pieces, 4’’ x4’’x 4 feet back pole 2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter 4’’ 1piece. cloth beam diameter 4’’ 1piece. 5 wheel take up motion 1 set jacquard mounting frame 1 no. slay 1 piece, heald shafts set of 4 healds with gulla & fani 1 set treadle set of 4 treadles 1 set neck cord 1 ball, jala 1 kg, naka—1/2 kg & pagia ½ kg. note rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting 2 pieces, 4’’x4’’x5 feet front pole 2pieces, 4’’ x4’’x 4 feet back pole 2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter 4’’ 1piece. cloth beam diameter 4’’ 1piece. 5 wheel take up motion 1 set, jacquard mounting frame 1 no. 2 shedding rollers (biarol) 1 set heald shafts set of 4 healds & fani 1 set, treadle set of 4 treadles 1 set, slay 1 piece, neck cord 1 ball, jala 1kg, tana garari 12set, comber board 1 set, mail eye , hirness & lingoe of 10gm 5200 set. note rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting 2 pieces, 4’’x4’’x5 feet front pole 2pieces, 4’’ x4’’x 4 feet back pole 2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter 4’’ 1piece. cloth beam diameter 4’’ 1piece. 5 wheel take up motion 1 set slay 1 piece, heald shafts set of 4 healds &fani 1 set treadle set of 4 treadles 1 set note rate to be quoted including pit digging and installation of pitloom. , front pole for slay mounting 2 pieces, 4’’x4’’x5 feet front pole 2pieces, 4’’ x4’’x 4 feet back pole 2 pieces, 4’’ x4’’x 2.5 feet warp beam diameter 4’’ 1piece. cloth beam diameter 4’’ 1piece. 5 wheel take up motion 1 set slay 1 piece, heald shafts set of 4 healds &fani 1 set treadle set of 4 treadles 1 set note rate to be quoted including pit digging and installationof pitloom. , handloom jacquards, dobbey & warping machines , 100 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 80 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 60 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 50 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 40 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 30 chowk jacquard made with shisham wood suitable for banarasi handloom along with set of following items: connecting lever – 1 no., card stand 1 no. punching plate – 1 set harness ball – 10 no. neck cord (nylon) – 200.00 gm pagia (nylon) – 1.00 kg naka (nylon) – 500.00 gm along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 480 hook electronic jacquard with single phase self driving mechanism 1, power including motor= 600 watt. 1, control panel with usb pen drive support 1, jacquard guide board 1, jacquard harness connector/ linker 480, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate 8, double loop naka with dead weight/ suwa12gm 2400, comber board with aluminium frame 1, 3ply nylon gulla/ shaft with steel flat pipe 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , 640 hook electronic jacquard with single phase self driving mechanism. power including motor= 700 watt. control panel with usb pen drive support 1, jacquard guide board 1, jacquard harness connector/ linker 640, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate 8, double loop naka with dead weight/ suwa12gm 2400, comber board with aluminium frame 1, 3ply nylon gulla/ shaft with steel flat pipe 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , 800 hook electronic jacquard with single phase self driving mechanism. power including motor= 750 watt. control panel with usb pen drive support 1, jacquard guide board 1, jacquard harness connector/ linker 800, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate 8, double loop naka with dead weight/ suwa12gm 2400, comber board with aluminium frame 1, 3ply nylon gulla/ shaft with steel flat pipe 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tyeing) , 960 hook electronic jacquard with single phase self driving mechanism. power including motor=750watt. control panel with usb pen drive support 1, jacquard guide board 1, jacquard harness connector/ linker 960, upper gulla/ shafts driving lever with support plate – 4, bottom gulla/ shafts driving lever with support plate 8, double loop naka with dead weight/ suwa12gm 2400, comber board with aluminium frame 1, 3ply nylon gulla/ shaft with steel flat pipe 6 along with installation & commissioning of jacquard & harnessing (jala, pagia tying) , horizontal drum warping machine 72” for use of handloom warping made of shakhu wood drum circumference – 5 yards length – 72”, width – 8 feet creel capacity – 200 bobbins with warping heck & brake system arrangement installation & commissioning included , for use of handloom warping made of shakhu wood drum circumference – 5 yards length – 90”, width – 8 feet creel capacity – 200 bobbins with warping heck & brake system arrangement installation & commissioning included , for use of handloom warping (made from sakhu wood) circumference 4 yards, pole size 4”x4”x6.5 feet, heck – 1 feet x 1 feet – 2 pieces creel capacity – 100 bobbins installation & commissioning included , handloom accessories , with good quality single phase isi motor ac ¼ hp 1440 rpm , good quality isi wires, isi switches, good quality parts, high weight lifting capacity along with successful installation & commissioning on loom , suitable for weaving of kaduwa buti on handloom please quote rate per buti. with successful demo on loom , reed – 96s x 50” , reed – 100s x 50” , reed – 104s x 50” , reed – 112s x 50” , reed – 116s x 50” , reed – 120s x 50” , reed 24s x 50” , reed 24s x 72” , reed 24s x 102” , reed – 20s x50’’ , reed – 20s x72’’ , reed – 20s x102’’ , reed 18s x50’’ , reed 18s x72’’ , reed 18s x102’’ , reed 16s x50’’ , reed 16s x72’’ , reed 16s x102’’ , reed – 14s x50’’ , reed – 14s x72’’ , reed – 14s x102’’ , reed – 12s x50’’ , reed –12s x 72’’ , reed –12s x 102’’ , reed – 10s x50’’ , reed – 10s x72’’ , reed – 10s x102’’ , reed 48s x50’’ , reed 48s x72’’ , reed 48s x102’’ , reed 44s x50’’ , reed 44s x72’’ , reed 44s x102’’ , reed – 40s x50’’ , reed – 40s x72’’ , reed – 40s x102’’ , reed 36s x50’’ , reed 36s x72’’ , reed 36s x102’’ , reed – 32s x50’’ , reed – 32s x72’’ , reed – 32s x102’’ , reed – 28s x50’’ , reed – 28s x72’’ , reed – 28s x102’’ , nylon heald 96s(complete set of baser & gulla) set of 4 pcs , nylon heald 104s(complete set of baser & gulla) , nylon heald 108s(complete set of baser & gulla) , nylon heald 112s(complete set of baser & gulla) , nylon heald 116s(complete set of baser & gulla) , nylon heald 120s(complete set of baser & gulla) , nylon heald 96(complete set of baser & gulla) set of 5 pcs , wire heald (13”) set of 1000 nos , wire heald (11”) set of 1000 nos , horn shuttle – 10”, , wooden shuttle (nav vali) – setof 4 pcs, suitable for duri weaving , sley – 60” (sakhu wood),suitable for duri weaving , elastic cord –packet of500 gm , heald hook – set of 2 pcs , lease rod – set of 4 pcs , bindhani – set of 3 pcs , baiser – set of 10 pcs , nari– set of 50 pcs , sirki – set of 100 pcs , cotton string (thin) packet of 500 gm , punching card sheet cards 44 oz for punching cars for jacquard / dobby , comber board for 56” loom frame made of shakhu/shiaham wood with fiber / wire mesh , comber board for 60” loom frame made of shakhu/shiaham wood with fiber / wire mesh , for use on harnessing on handloom made of iron, weight – upto 8 gm, (rate per 1000) , for jacquard/dobby card cutting made from sakhu wood, size 36”x24” , mat form (rate in kg) , ball form (rate per piece ball) , for harnessing per 1000 , for lifting of heald frames 2.5” dia x 2 feet (set of 2 pcs) , for lifting of heald frames(set of 8 pcs) , cotton string (thick) packet of 1.00 kg , cycle charkha , set of 5 wheel take up motion , wooden treadles– set of 4 nos,2” x 2” x length 1.00 meter, suitable for duri loom , 4” diameter for 60” width duri handloom , 4” diameter for 60” width duri handloom , 4” diameter for 54” width duri handloom , 4” diameter for 54” width duri handloom , wooden heald frame complete with varnish or steel wire healds set of 4 nos.,suitable for 60” duri handloom and use of 13” wire heald , wooden lam rod – set of 4 nos suitable for 60” duri handloom , wooden pirn 6” – set of 100 nos suitable for use in naav shuttle for duri weaving , bobbin – set of 50 pcs , with installation & commissioning solar home light with solar pannel – 60 watt – 1 no. battery 40ah tubelar – 1 no., charge controller– 1 no., led light – 5 watt – 2 nos. ceiling fan 25 watt– 1 no....

Indian Army - Uttar Pradesh

31687281 bids are invited for cn 10309327 pack with alluminium frame (modified) (q3) total quantity : 4851...

Indian Army - Uttar Pradesh

31607128 bids are invited for title1 total quantity : 100 looking mirror with aluminum framing 600 x450mm mounted on aluminum frame ...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

31323557 supply of material for balance work of 100 seated hostel building, pinahat, fatehabad supply of material for balance work of 100 seated hostel building, pinahat, fatehabad , cement ( p.p.c. 50 kg bags ) , coarse sand , stone ballast 40 mm , stone grit 20 mm , bricks 1st class m 150 , tmt bars , cinder , flush door shutter 32 mm thick , aluminium frame , aluminium shutter , pre laminated board , aluminium tower bolt 250 mm , al hanging floor door stopper , oxidised tower bolt 250x10 , oxidised tower bolt 200x10 , oxidised handle , oxidised sliding bolts 250x16 mm , marble stone slab white , kota stone slab , glazed tiles , vitrified tiles , glass strips 32 mm wide , chequered tiled , primer paint red oxide , primer paint wood , enamel paint , water proof cement paint , white cement primer , indian type wc pan , ewc , wash basin complete set , ss sink 610x510x200 mm bowl , ss sink 610x460x200 mm bowl , chinaware lab sink 600x450x200 mm , 600x450 mm beveled edge mirror , pvc ( flexible ) waste pipe 32 mm , pvc ( flexible ) waste pipe 40 mm , ( cpvc ) pipes 16 mm , ( cpvc ) pipes 20 mm , ( cpvc ) pipes 25 mm , ( cpvc ) pipes 32 mm , gm gate valve with c.i. wheel 25 mm , gm gate valve with c.i. wheel 32 mm , ball valve ( brass ) 25 mm , pvc connection pipe 15x450 mm , c.p. brass bib cock 15 mm , c.p. brass long body bib cock , c.p. brass stop cock ( concealed ) , c.p. brass angle valve , stainless steel grating , pvc rain water pipes 110 mm dia , s.w.gully trap 180x150 mm , pvc self cleansing design 110 mm , upvc p trap 110 mm , upvc collar 110 mm , upvc door tee 110 mm , upvc bend 87.50 110 mm , upvc door bend 110 mm , upvc vent cowl , upvc pipe clips...

Government Industrial Training Institute - Uttar Pradesh

31300062 bids are invited for a 4 size paper , staff attendance register , trainee attendance register , trainee admission register , rubber stamp , globe , plastic folder , ball pen , stapler pin small , stapler pin large , tag file , pen stand with pen , table topelevater , glass notice board aluminium frame large , register medium , register small , highlighter , marker pen, pin cusion , admission form with printing total quantity : 945...

North Eastern Railways - Uttar Pradesh

31216458 auction sale of aluminum scrap consisting of rear cover and front cover wire strip aluminum sheet chequred sheet pieces aluminum coach sheet aluminum electrical fittings diesel loco part water tank part aluminum frame of mirror door frame window electronics part and fitting and other aluminum part unfit for railway use lying in three stacks on in godown no. 14 one stack in front of godown no. 12 and behind ward no. 84 cutting allowed to remove ferrous and rubber attachment. [hsn 760200 gst 18%]...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

31152827 supply of material for balance work of 100 seated hostel building, pinahat, fatehabad, agra. supply of material for balance work of 100 seated hostel building, pinahat, fatehabad, agra. , cement (p.p.c. 50 kg bags) , coarse sand , stone ballast 40 mm , stone grit 20 mm , bricks 1st class m 150 , tmt bars , cinder , flush door shutter 32 mm thick , aluminium frame , aluminium shutter , pre laminated board , aluminium tower bolt 250 mm , al hanging floor door stopper , oxidised tower bolt 250x10 , oxidised tower bolt 200x10 , oxidised handle , oxidised sliding bolts 250x16 mm , marble stone slab white , kota stone slab , glazed tiles , vitrified tiles , glass strips 32 mm wide , chequered tiled , primer paint red oxide , primer paint wood , enamel paint , water proof cement paint , white cement primer , indian type wc pan , ewc , wash basin complete set , ss sink 610x510x200 mm bowl , ss sink 610x460x200 mm bowl , chinaware lab sink 600x450x200 mm , 600x450 mm beveled edge mirror , pvc (flexible) waste pipe 32 mm , pvc (flexible) waste pipe 40 mm , (cpvc) pipes 16 mm , (cpvc) pipes 20 mm , (cpvc) pipes 25 mm , (cpvc) pipes 32 mm , gm gate valve with c.i. wheel 25 mm , gm gate valve with c.i. wheel 32 mm , ball valve (brass) 25 mm , pvc connection pipe 15x450 mm , c.p. brass bib cock 15 mm , c.p. brass long body bib cock , c.p. brass stop cock (concealed) , c.p. brass angle valve , stainless steel grating , pvc rain water pipes 110 mm dia , s.w.gully trap 180x150 mm , pvc self cleansing design 110 mm , upvc p trap 110 mm , upvc collar 110 mm , upvc door tee 110 mm , upvc bend 87.50 110 mm , upvc door bend 110 mm , upvc vent cowl , upvc pipe clips...

Indian Army - Uttar Pradesh

31083527 bids are invited for m & l for providing and fixing stailess steel ( grade 304 ) grills as per specification, item no.01 , m & l for anodised aluminium frame, channels or angles for doors, windows, ventilators as per specification, item no.02 , m & l for anodised aluminium grill ( dg 124, 70mmx80mm ) ( anodisedtransparent or dyed to required shade according to is:1868with minimum anodic coating of grade ac 15 ) as perspecification, item no.03boq title provn of ss total quantity : 1890...

Indian Army - Uttar Pradesh

30999279 bids are invited for custom aluminium (frame) partition with glass (q3) total quantity : 805...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

30924294 supply of material for balance work of 100 seated hostel building, pinahat, fatehabad, agra. supply of material for balance work of 100 seated hostel building, pinahat, fatehabad, agra. , cement ( p.p.c. 50 kg bags ) , coarse sand , stone ballast 40 mm , stone grit 20 mm , bricks 1st class m 150 , tmt bars , cinder , flush door shutter 32 mm thick , aluminium frame , aluminium shutter , pre laminated board , aluminium tower bolt 250 mm , al hanging floor door stopper , oxidised tower bolt 250x10 , oxidised tower bolt 200x10 , oxidised handle , oxidised sliding bolts 250x16 mm , marble stone slab white , kota stone slab , glazed tiles , vitrified tiles , glass strips 32 mm wide , chequered tiled , primer paint red oxide , primer paint wood , enamel paint , water proof cement paint , white cement primer , indian type wc pan , ewc , wash basin complete set , ss sink 610x510x200 mm bowl , ss sink 610x460x200 mm bowl , chinaware lab sink 600x450x200 mm , 600x450 mm beveled edge mirror , pvc ( flexible ) waste pipe 32 mm , pvc ( flexible ) waste pipe 40 mm , ( cpvc ) pipes 16 mm , ( cpvc ) pipes 20 mm , ( cpvc ) pipes 25 mm , ( cpvc ) pipes 32 mm , gm gate valve with c.i. wheel 25 mm , gm gate valve with c.i. wheel 32 mm , ball valve ( brass ) 25 mm , pvc connection pipe 15x450 mm , c.p. brass bib cock 15 mm , c.p. brass long body bib cock , c.p. brass stop cock ( concealed ) , c.p. brass angle valve , stainless steel grating , pvc rain water pipes 110 mm dia , s.w.gully trap 180x150 mm , pvc self cleansing design 110 mm , upvc p trap 110 mm , upvc collar 110 mm , upvc door tee 110 mm , upvc bend 87.50 110 mm , upvc door bend 110 mm , upvc vent cowl , upvc pipe clips...

Department of Defence Production - Uttar Pradesh

30911688 bids are invited for aluminum frame complete pure epoxy powdercoated black to minimum 50 micron ( 0.05mm ) fitted withauto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( for anunlimited time ) total quantity : 51806...

North Eastern Railways - Uttar Pradesh

30879965 supply of supply and installation of back lit clip on display board with hanging arrangement and adapter including design , development and fabrication of display board .size 5 feet x 3 feet with translit aluminium frame work with polycarbonate sheet of 2 mm thickness.supply and installation of back lit clip on display board with hanging arrangement and adapter including design , development and fabrication of display board .size 5 feet x 3 feet with translit aluminium frame work with polycarbonate sheet of 2 mm thickness.,supply and installation of back lit clip on display board with hanging arrangement and adapter including design , development and fabrication of display board .size 5 feet x 3 feet with translit aluminium frame work with polycarbonate sheet of 2 mm thickness....

Northern Railway - Uttar Pradesh

30711380 auction sale of scrap oil / air filter with ss, iron and aluminium frame of sort and sizes with or without parts and fittings with nf attachment if any.note lbplocation lying at line no. 8...

Uttar Pradesh State Construction and Infrastructure Development Corporation Limited - Uttar Pradesh

30617780 supply of material for the construction work of typical boundary wall with gate at food and drug laboratory and divisional office building in district moradabad vitreous china sanitary ware, cp fitting, cast iron pipe and fitting, g.m. gate valve / forged brass ball, paint, g.i. pipe, chaina wate fitting colour, cpvc pipe and fitting, granite stone, aluminum frame and shutter, door frame, minimum thickness of powder coating, biding clip, glassp pan, pvc pipe, cement, tmt steel, chaina glazed wall / floor and verified tiles....

Department Of Technical Education - Uttar Pradesh

30440025 bids are invited for 21.121.1.121.1.1.1 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :for fixed portionanodised aluminium ( anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac 15 ) , 21.1.221.1.2.1 for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) anodised aluminium ( anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac 15 ) , 21.221.2.2 providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge.pre laminated particle board with decorative lamination on both sides , 21.321.3.2 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , 21.421.4.1 providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to is : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer in charge.with stainless steel cover plate minimum 1.25 mm thickness , 21.821.8.1 filling the gap in between aluminium frame & adjacent rcc / brick / stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer in charge complete.upto 5mm depth and 5 mm width , 21.13 providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete. , 21.1621.16.1 providing and fixing aluminium round shape handle of outer dia 100 mm with ss screws etc. complete as per direction of engineer in chargeanodized ( ac 15 ) aluminium , 9.1019.101.2 providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete.twin rubber stopper , 9.979.97.3 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm , 9.969.96.2 providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm , 9.479.47.2 providing and fixing nickel plated m.s. pipe curtain rods with nickel plated brackets :25 mm dia ( heavy type ) , 11.37a providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , 11.5611.56.1 providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge.polished granite stone slab colour of black, cherry / ruby red or equivalent , 18.118.10.1 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i / c cutting and making good the walls etc.15 mm dia nominal bore , 15.4415.44.1 dismantling g.i. pipes ( external work ) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of engineer in charge :15 mm to 40 mm nominal bore , 9.1669.166.1 providing and fixing 18mm thick both sides pre laminated cement bonded wood particle board as per is : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of engineer in charge ( note: fittings to be paid separately ) .18 mm thick , 13.10813.108.1 distempering with 1st quality acrylic distemper ( ready made ) having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturers specification.one or more coats on old work , 13.413.4.1 12 mm cement plaster ( cement plaster in coarse sand ) of mix :1:4 ( 1 cement: 4 coarse sand ) , ns supplying & fixing 600 mm*750 mm* 450 mm wooden / plywood rack / partition shelves with two vertical and three horizontal partitions, open from the front side & completely covered from the back side, including primer and wooden paint complete total quantity : 1...

Indian Army - Uttar Pradesh

30359980 bids are invited for custom aluminium (frame) partition with glass (q3) () total quantity : 805...

Technical Education Board - Uttar Pradesh

30267758 bids are invited for aluminium partition providing, fitting and fixing coloured anodised aluminium hollow section of size approx 10 x 10 x 7 ( ft. ) with 1.5 gaze for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal / vertical member including aluminium cleat3.5 mm thick, rubber gasket, bolting device screws etc and fixing of pre laminated board / nepal board / bhutan board with tapper cleat thick as directed by the department at all levels.providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels with 5 mm thick glass or as per requirement total quantity : 1...

Department Of Technical Education - Uttar Pradesh

30260516 bids are invited for aluminium partition providing, fitting and fixing coloured anodised aluminium hollow section of size10x10 with 1.5 thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal / vertical member including aluminium cleat 3.5 mm thick, rubber gasket, bolting device screws etc and fixing of pre laminated board / nepal board / bhutan board with tapper cleatthick as directed by the department at all levels. providing, fitting and fixing coloured anodised aluminium sliding glazed doors with anodised aluminium frames made of 100mm x 45mm x 2mm section with door style of size 81mm x 45mm x 2mm, top rails 55mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, fitted with glazing clip, special type rubber gasket complete including roller, tower bolt, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levelswith 5 mm thick glassor as per requirement total quantity : 1...

Indian Army - Uttar Pradesh

30252325 bids are invited for cpu intel core i3 10100 4 gb/ 1000 gb hdd/ windows 10 280 g6 mt i3 10100 win10p 413 with led backlit monitor size 18 monitor resolution (pixels) : 1600 x 900 na , benq short throw (0.41 to 0.9) multimedia projector (mmp) with 1024 x 768 (xga) resolution benq technology one chip dlp, type of light source : uhp / uhe / uhm, brightness (lumens) 3600 na , microtek 0.5/84 (kva/vah) interactive ups microtek,rated output (volt) : single phase sinewave 230v ac ,50hz , type of battery smf vrla confirming to jisc 8702 pt 1,2 &3 na , microtek 1.0/168 (kva/vah) interactive ups, rated output (volt) : single phase quasisin wave 230 v ac, 50 hz, type of battery smf vrla confirming to jisc 8702 pt 1,2 &3 na , 4x 6 feet (widthxheight) ceramic steel with engraving / porcelain enamel steel with engraving white dry erase writing boards with all thickness of anodized aluminium frame (min) in mm : 1.2 millimeter na , 4x 6 feet (widthxheight) resin magnetic board : resin coated steel sheet surface green dry erase writing boards na total quantity : 1...

Indian Army - Uttar Pradesh

29983814 bids are invited for cn 10309327 pack with alluminium frame (modified) (q3) () total quantity : 4195...

Department of Defence Production - Uttar Pradesh

29937247 bids are invited for aluminium frame complete pure epoxy powdercoated black to minimum 50 micron (0.05mm)fitted withauto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes (a maximum of300 times) total quantity : 18350...

Department of Higher Education - Uttar Pradesh

29705003 bids are invited for class room desk cum bench solution desk cum bench of size of 1830 x 1130 x 757, desk top panel all panels are made from 18mm thick pre laminated twin board ( e1 / p2 grade ) with pvc edge banding on all sides.understructure all side metal frames, and cross connectors are made from combination of 25.4 x1.2 mm thick ( approx. 18 swg ) round erw tubes , 31.8 x 1.2 mm thick ( approx. 18 swg ) round erw tubes and 28.6 x 1.2 mm thick ( approx. 18 swg ) round erw tubes ( as per is:7138 ) which are welded together. , table for classroom 1200 mm x 600 mm with attached pedestal wooden table 4020 size shall be 1200 width mm x 600 depth mm x 740 height mm. tabletop shall be 25 mm thick plain particle board ( ppb ) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate , high back chair for classroom the seat / back assembly: the seat and back should be made up of 1.2 ±0.1 cm. thick hot pressed plywood and upholstered with fabric and molded polyurethane foam with pvc lipping all around , waste bin for classroom ss the waste bin material – ss 202 ; sheet thickness – 0.4mm ; top cover – noperforated type – yes ; rubber bush at bottom ; diameter – 10 inch ; height – 14 inch , magnetic white board for classroom purpose of board glossy surface writing only. surface material 0.3mm thick resin coated sheet surface , core material 8 mm thick particle board , adhesive best quality rubber sprayable adhesive. , notice board 3ft x 2ft display board, surface material woolen felt / fabric in various colours corematerial 9 mm thick soft board adhesive best quality rubber sprayable adhesive, backingmaterial 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per s:1285 2002 16 mm thickness, dimensions – 3ftx 2ft , notice board 6ft x 4ft display board, surface material woolen felt / fabric in various colours corematerial 9 mm thick soft board adhesive best quality rubber sprayable adhesive, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per s:1285 2002 16 mm thickness, dimensions – 6ftx 4ft total quantity : 1...